main.mk revision d8a6ac100009f2fb158e26d9f7199d800eb57887
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# These are the modifier targets that don't do anything themselves, but 89# change the behavior of the build. 90# (must be defined before including definitions.make) 91INTERNAL_MODIFIER_TARGETS := showcommands 92 93# Bring in standard build system definitions. 94include $(BUILD_SYSTEM)/definitions.mk 95 96ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 97$(info ***************************************************************) 98$(info ***************************************************************) 99$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 100 the make command line.) 101# XXX The single quote on this line fixes gvim's syntax highlighting. 102# Without which, the rest of this file is impossible to read. 103$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 104$(info choosecombo.) 105$(info ***************************************************************) 106$(info ***************************************************************) 107$(error stopping) 108endif 109 110ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 111$(info ***************************************************************) 112$(info ***************************************************************) 113$(info Invalid variant: $(TARGET_BUILD_VARIANT) 114$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 115$(info ***************************************************************) 116$(info ***************************************************************) 117$(error stopping) 118endif 119 120### 121### In this section we set up the things that are different 122### between the build variants 123### 124 125is_sdk_build := 126ifneq ($(filter sdk,$(MAKECMDGOALS)),) 127is_sdk_build := true 128endif 129ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 130is_sdk_build := true 131endif 132 133 134## user/userdebug ## 135 136user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 137enable_target_debugging := true 138ifneq (,$(user_variant)) 139 # Target is secure in user builds. 140 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 141 142 tags_to_install := user 143 ifeq ($(user_variant),userdebug) 144 # Pick up some extra useful tools 145 tags_to_install += debug 146 else 147 # Disable debugging in plain user builds. 148 enable_target_debugging := 149 endif 150 151 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 152 # Also, remove the corresponding block in config/product_config.make. 153 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 154 WITH_DEXPREOPT := true 155 endif 156 157 # Disallow mock locations by default for user builds 158 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 159 160else # !user_variant 161 # Turn on checkjni for non-user builds. 162 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 163 # Set device insecure for non-user builds. 164 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 165 # Allow mock locations by default for non user builds 166 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 167endif # !user_variant 168 169ifeq (true,$(strip $(enable_target_debugging))) 170 # Target is more debuggable and adbd is on by default 171 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 172 # Include the debugging/testing OTA keys in this build. 173 INCLUDE_TEST_OTA_KEYS := true 174else # !enable_target_debugging 175 # Target is less debuggable and adbd is off by default 176 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 177endif # !enable_target_debugging 178 179## eng ## 180 181ifeq ($(TARGET_BUILD_VARIANT),eng) 182tags_to_install := user debug eng 183 # Don't require the setup wizard on eng builds 184 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 185 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 186endif 187 188## tests ## 189 190ifeq ($(TARGET_BUILD_VARIANT),tests) 191tags_to_install := user debug eng tests 192endif 193 194## sdk ## 195 196ifdef is_sdk_build 197ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 198$(error The 'sdk' target may not be specified with any other targets) 199endif 200# TODO: this should be eng I think. Since the sdk is built from the eng 201# variant. 202tags_to_install := user debug eng 203ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 204ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 205else # !sdk 206# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 207ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 208endif 209 210# Install an apns-conf.xml file if one's not already being installed. 211ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 212 PRODUCT_COPY_FILES += \ 213 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 214 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 215 $(warning implicitly installing apns-conf_sdk.xml) 216 endif 217endif 218# If we're on an eng or tests build, but not on the sdk, and we have 219# a better one, use that instead. 220ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 221 ifdef is_sdk_build 222 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 223 ifneq ($(strip $(apns_to_use)),) 224 PRODUCT_COPY_FILES := \ 225 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 226 $(strip $(apns_to_use)):system/etc/apns-conf.xml 227 endif 228 endif 229endif 230 231ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 232 233# enable vm tracing in files for now to help track 234# the cause of ANRs in the content process 235ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 236 237 238# ------------------------------------------------------------ 239# Define a function that, given a list of module tags, returns 240# non-empty if that module should be installed in /system. 241 242# For most goals, anything not tagged with the "tests" tag should 243# be installed in /system. 244define should-install-to-system 245$(if $(filter tests,$(1)),,true) 246endef 247 248ifdef is_sdk_build 249# For the sdk goal, anything with the "samples" tag should be 250# installed in /data even if that module also has "eng"/"debug"/"user". 251define should-install-to-system 252$(if $(filter samples tests,$(1)),,true) 253endef 254endif 255 256 257# If all they typed was make showcommands, we'll actually build 258# the default target. 259ifeq ($(MAKECMDGOALS),showcommands) 260.PHONY: showcommands 261showcommands: $(DEFAULT_GOAL) 262endif 263 264# These targets are going to delete stuff, don't bother including 265# the whole directory tree if that's all we're going to do 266ifeq ($(MAKECMDGOALS),clean) 267dont_bother := true 268endif 269ifeq ($(MAKECMDGOALS),clobber) 270dont_bother := true 271endif 272ifeq ($(MAKECMDGOALS),dataclean) 273dont_bother := true 274endif 275ifeq ($(MAKECMDGOALS),installclean) 276dont_bother := true 277endif 278 279# Bring in all modules that need to be built. 280ifneq ($(dont_bother),true) 281 282subdir_makefiles := 283 284ifeq ($(HOST_OS),windows) 285SDK_ONLY := true 286endif 287ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 288SDK_ONLY := true 289endif 290 291ifeq ($(SDK_ONLY),true) 292 293subdirs := \ 294 prebuilt \ 295 build/libs/host \ 296 dalvik/dexdump \ 297 dalvik/libdex \ 298 dalvik/tools/dmtracedump \ 299 dalvik/tools/hprof-conv \ 300 development/emulator/mksdcard \ 301 development/tools/line_endings \ 302 development/host \ 303 external/expat \ 304 external/libpng \ 305 external/qemu \ 306 external/sqlite/dist \ 307 external/zlib \ 308 frameworks/base/libs/utils \ 309 frameworks/base/tools/aapt \ 310 frameworks/base/tools/aidl \ 311 system/core/adb \ 312 system/core/fastboot \ 313 system/core/libcutils \ 314 system/core/liblog \ 315 system/core/libzipfile 316 317# The following can only be built if "javac" is available. 318# This check is used when building parts of the SDK under Cygwin. 319ifneq (,$(shell which javac 2>/dev/null)) 320$(warning sdk-only: javac available.) 321subdirs += \ 322 build/tools/signapk \ 323 build/tools/zipalign \ 324 dalvik/dx \ 325 dalvik/libcore \ 326 development/apps \ 327 development/tools/archquery \ 328 development/tools/androidprefs \ 329 development/tools/apkbuilder \ 330 development/tools/jarutils \ 331 development/tools/layoutlib_utils \ 332 development/tools/ninepatch \ 333 development/tools/sdkstats \ 334 development/tools/sdkmanager \ 335 development/tools/mkstubs \ 336 frameworks/base \ 337 frameworks/base/tools/layoutlib \ 338 external/googleclient \ 339 packages 340else 341$(warning sdk-only: javac not available.) 342endif 343 344# Exclude tools/acp when cross-compiling windows under linux 345ifeq ($(findstring Linux,$(UNAME)),) 346subdirs += build/tools/acp 347endif 348 349else # !SDK_ONLY 350ifeq ($(BUILD_TINY_ANDROID), true) 351 352# TINY_ANDROID is a super-minimal build configuration, handy for board 353# bringup and very low level debugging 354 355INTERNAL_DEFAULT_DOCS_TARGETS := 356 357subdirs := \ 358 bionic \ 359 system/core \ 360 build/libs \ 361 build/target \ 362 build/tools/acp \ 363 build/tools/apriori \ 364 build/tools/kcm \ 365 build/tools/soslim \ 366 external/elfcopy \ 367 external/elfutils \ 368 external/yaffs2 \ 369 external/zlib 370else # !BUILD_TINY_ANDROID 371 372# 373# Typical build; include any Android.mk files we can find. 374# 375INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 376subdirs := $(TOP) 377 378FULL_BUILD := true 379 380endif # !BUILD_TINY_ANDROID 381 382endif # !SDK_ONLY 383 384# Can't use first-makefiles-under here because 385# --mindepth=2 makes the prunes not work. 386subdir_makefiles += \ 387 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 388 389# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 390# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 391# make sure only one exists. 392# Real boards should always be associated with an OEM vendor. 393board_config_mk := \ 394 $(strip $(wildcard \ 395 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 396 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 397 )) 398ifeq ($(board_config_mk),) 399 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 400endif 401ifneq ($(words $(board_config_mk)),1) 402 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 403endif 404include $(board_config_mk) 405TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 406board_config_mk := 407 408# Clean up/verify variables defined by the board config file. 409TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 410TARGET_CPU_ABI := $(strip $(TARGET_CPU_ABI)) 411ifeq ($(TARGET_CPU_ABI),) 412 $(error No TARGET_CPU_ABI defined by board config: $(board_config_mk)) 413endif 414 415# 416# Include all of the makefiles in the system 417# 418 419ifneq ($(ONE_SHOT_MAKEFILE),) 420# We've probably been invoked by the "mm" shell function 421# with a subdirectory's makefile. 422include $(ONE_SHOT_MAKEFILE) 423# Change CUSTOM_MODULES to include only modules that were 424# defined by this makefile; this will install all of those 425# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 426# so that the modules will be installed in the same place they 427# would have been with a normal make. 428CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 429FULL_BUILD := 430INTERNAL_DEFAULT_DOCS_TARGETS := 431# Stub out the notice targets, which probably aren't defined 432# when using ONE_SHOT_MAKEFILE. 433NOTICE-HOST-%: ; 434NOTICE-TARGET-%: ; 435else 436include $(subdir_makefiles) 437endif 438# ------------------------------------------------------------------- 439# All module makefiles have been included at this point. 440# ------------------------------------------------------------------- 441 442# ------------------------------------------------------------------- 443# Include any makefiles that must happen after the module makefiles 444# have been included. 445# TODO: have these files register themselves via a global var rather 446# than hard-coding the list here. 447ifdef FULL_BUILD 448 # Only include this during a full build, otherwise we can't be 449 # guaranteed that any policies were included. 450 -include frameworks/policies/base/PolicyConfig.mk 451endif 452 453# ------------------------------------------------------------------- 454# Fix up CUSTOM_MODULES to refer to installed files rather than 455# just bare module names. Leave unknown modules alone in case 456# they're actually full paths to a particular file. 457known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 458unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 459CUSTOM_MODULES := \ 460 $(call module-installed-files,$(known_custom_modules)) \ 461 $(unknown_custom_modules) 462 463# ------------------------------------------------------------------- 464# Define dependencies for modules that require other modules. 465# This can only happen now, after we've read in all module makefiles. 466# 467# TODO: deal with the fact that a bare module name isn't 468# unambiguous enough. Maybe declare short targets like 469# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 470# BUG: the system image won't know to depend on modules that are 471# brought in as requirements of other modules. 472define add-required-deps 473$(1): $(2) 474endef 475$(foreach m,$(ALL_MODULES), \ 476 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 477 $(if $(r), \ 478 $(eval r := $(call module-installed-files,$(r))) \ 479 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 480 ) \ 481 ) 482m := 483r := 484add-required-deps := 485 486# ------------------------------------------------------------------- 487# Figure out our module sets. 488 489# Of the modules defined by the component makefiles, 490# determine what we actually want to build. 491# If a module has the "restricted" tag on it, it 492# poisons the rest of the tags and shouldn't appear 493# on any list. 494Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 495 $(ALL_BUILT_MODULES) \ 496 $(CUSTOM_MODULES)) 497# TODO: Remove the 3 places in the tree that use 498# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 499 500ifdef FULL_BUILD 501 # The base list of modules to build for this product is specified 502 # by the appropriate product definition file, which was included 503 # by product_config.make. 504 user_PACKAGES := $(call module-installed-files, \ 505 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 506 ifeq (0,1) 507 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 508 $(foreach p,$(user_PACKAGES),$(info : $(p))) 509 $(error done) 510 endif 511else 512 # We're not doing a full build, and are probably only including 513 # a subset of the module makefiles. Don't try to build any modules 514 # requested by the product, because we probably won't have rules 515 # to build them. 516 user_PACKAGES := 517endif 518# Use tags to get the non-APPS user modules. Use the product 519# definition files to get the APPS user modules. 520user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 521user_MODULES := $(user_MODULES) $(user_PACKAGES) 522 523eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 524debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 525tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 526 527ifeq ($(strip $(tags_to_install)),) 528$(error ASSERTION FAILED: tags_to_install should not be empty) 529endif 530modules_to_install := $(sort $(Default_MODULES) \ 531 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 532 533# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 534# Filter out (do not install) any overridden packages. 535overridden_packages := $(call get-package-overrides,$(modules_to_install)) 536ifdef overridden_packages 537# old_modules_to_install := $(modules_to_install) 538 modules_to_install := \ 539 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 540 $(modules_to_install)) 541endif 542#$(error filtered out 543# $(filter-out $(modules_to_install),$(old_modules_to_install))) 544 545# Don't include any GNU targets in the SDK. It's ok (and necessary) 546# to build the host tools, but nothing that's going to be installed 547# on the target (including static libraries). 548ifdef is_sdk_build 549 target_gnu_MODULES := \ 550 $(filter \ 551 $(TARGET_OUT_INTERMEDIATES)/% \ 552 $(TARGET_OUT)/% \ 553 $(TARGET_OUT_DATA)/%, \ 554 $(sort $(call get-tagged-modules,gnu))) 555 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 556 modules_to_install := \ 557 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 558endif 559 560 561# config/Makefile contains extra stuff that we don't want to pollute this 562# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 563# contains everything that's built during the current make, but it also further 564# extends ALL_DEFAULT_INSTALLED_MODULES. 565ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 566include $(BUILD_SYSTEM)/Makefile 567modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 568ALL_DEFAULT_INSTALLED_MODULES := 569 570endif # dont_bother 571 572# ------------------------------------------------------------------- 573# This is used to to get the ordering right, you can also use these, 574# but they're considered undocumented, so don't complain if their 575# behavior changes. 576.PHONY: prebuilt 577prebuilt: $(ALL_PREBUILT) 578 579# An internal target that depends on all copied headers 580# (see copy_headers.make). Other targets that need the 581# headers to be copied first can depend on this target. 582.PHONY: all_copied_headers 583all_copied_headers: ; 584 585$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 586 587# All the droid stuff, in directories 588.PHONY: files 589files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 590 591# ------------------------------------------------------------------- 592 593.PHONY: ramdisk 594ramdisk: $(INSTALLED_RAMDISK_TARGET) 595 596.PHONY: systemtarball 597systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 598 599.PHONY: userdataimage 600userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 601 602.PHONY: userdatatarball 603userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 604 605.PHONY: bootimage 606bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 607 608ifeq ($(BUILD_TINY_ANDROID), true) 609INSTALLED_RECOVERYIMAGE_TARGET := 610endif 611 612# Build files and then package it into the rom formats 613.PHONY: droidcore 614droidcore: files \ 615 systemimage \ 616 $(INSTALLED_BOOTIMAGE_TARGET) \ 617 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 618 $(INSTALLED_USERDATAIMAGE_TARGET) \ 619 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 620 $(INSTALLED_FILES_FILE) 621 622# The actual files built by the droidcore target changes depending 623# on the build variant. 624.PHONY: droid tests 625droid tests: droidcore 626 627$(call dist-for-goals, droid, \ 628 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 629 $(INTERNAL_OTA_PACKAGE_TARGET) \ 630 $(SYMBOLS_ZIP) \ 631 $(APPS_ZIP) \ 632 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 633 $(PACKAGE_STATS_FILE) \ 634 $(INSTALLED_FILES_FILE) \ 635 $(INSTALLED_BUILD_PROP_TARGET) \ 636 $(BUILT_TARGET_FILES_PACKAGE) \ 637 ) 638 639# Tests are installed in userdata.img. If we're building the tests 640# variant, copy it for "make tests dist". Also copy a zip of the 641# contents of userdata.img, so that people can easily extract a 642# single .apk. 643ifeq ($(TARGET_BUILD_VARIANT),tests) 644$(call dist-for-goals, droid, \ 645 $(INSTALLED_USERDATAIMAGE_TARGET) \ 646 $(BUILT_TESTS_ZIP_PACKAGE) \ 647 ) 648endif 649 650.PHONY: docs 651docs: $(ALL_DOCS) 652 653.PHONY: sdk 654ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 655sdk: $(ALL_SDK_TARGETS) 656$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 657 658.PHONY: findbugs 659findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 660 661.PHONY: clean 662dirs_to_clean := \ 663 $(PRODUCT_OUT) \ 664 $(TARGET_COMMON_OUT_ROOT) \ 665 $(HOST_OUT) \ 666 $(HOST_COMMON_OUT_ROOT) 667clean: 668 @for dir in $(dirs_to_clean) ; do \ 669 echo "Cleaning $$dir..."; \ 670 rm -rf $$dir; \ 671 done 672 @echo "Clean."; \ 673 674.PHONY: clobber 675clobber: 676 @rm -rf $(OUT_DIR) 677 @echo "Entire build directory removed." 678 679# The rules for dataclean and installclean are defined in cleanbuild.mk. 680 681#xxx scrape this from ALL_MODULE_NAME_TAGS 682.PHONY: modules 683modules: 684 @echo "Available sub-modules:" 685 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 686 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 687 688.PHONY: showcommands 689showcommands: 690 @echo >/dev/null 691 692