1/* 2 * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface 3 * 4 * Copyright (c) 2003-2006, Ericsson AB 5 * Copyright (c) 2005-2007, 2010-2011, Wind River Systems 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the names of the copyright holders nor the names of its 17 * contributors may be used to endorse or promote products derived from 18 * this software without specific prior written permission. 19 * 20 * Alternatively, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") version 2 as published by the Free 22 * Software Foundation. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 34 * POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37#ifndef _LINUX_TIPC_CONFIG_H_ 38#define _LINUX_TIPC_CONFIG_H_ 39 40#include <linux/types.h> 41#include <linux/string.h> 42#include <linux/tipc.h> 43#include <asm/byteorder.h> 44 45#ifndef __KERNEL__ 46#include <arpa/inet.h> /* for ntohs etc. */ 47#endif 48 49/* 50 * Configuration 51 * 52 * All configuration management messaging involves sending a request message 53 * to the TIPC configuration service on a node, which sends a reply message 54 * back. (In the future multi-message replies may be supported.) 55 * 56 * Both request and reply messages consist of a transport header and payload. 57 * The transport header contains info about the desired operation; 58 * the payload consists of zero or more type/length/value (TLV) items 59 * which specify parameters or results for the operation. 60 * 61 * For many operations, the request and reply messages have a fixed number 62 * of TLVs (usually zero or one); however, some reply messages may return 63 * a variable number of TLVs. A failed request is denoted by the presence 64 * of an "error string" TLV in the reply message instead of the TLV(s) the 65 * reply should contain if the request succeeds. 66 */ 67 68/* 69 * Public commands: 70 * May be issued by any process. 71 * Accepted by own node, or by remote node only if remote management enabled. 72 */ 73 74#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ 75#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ 76#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ 77#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ 78#define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ 79#define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ 80#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ 81#define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ 82#define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */ 83 84/* 85 * Protected commands: 86 * May only be issued by "network administration capable" process. 87 * Accepted by own node, or by remote node only if remote management enabled 88 * and this node is zone manager. 89 */ 90 91#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ 92#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ 93#define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */ 94#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */ 95#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ 96#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */ 97#define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */ 98#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ 99#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ 100 101#define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ 102#define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ 103#define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ 104#define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ 105#define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ 106#define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ 107#define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ 108#define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ 109 110/* 111 * Private commands: 112 * May only be issued by "network administration capable" process. 113 * Accepted by own node only; cannot be used on a remote node. 114 */ 115 116#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ 117#define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ 118#define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ 119#define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */ 120#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */ 121#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ 122#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */ 123#define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */ 124#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ 125#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ 126 127/* 128 * Reserved commands: 129 * May not be issued by any process. 130 * Used internally by TIPC. 131 */ 132 133#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ 134 135/* 136 * TLV types defined for TIPC 137 */ 138 139#define TIPC_TLV_NONE 0 /* no TLV present */ 140#define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ 141#define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ 142#define TIPC_TLV_STRING 3 /* char[128] (max) */ 143#define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ 144#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ 145 146#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ 147#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ 148#define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ 149#define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ 150#define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ 151#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ 152#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ 153#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ 154#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ 155#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ 156#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ 157 158/* 159 * Link priority limits (min, default, max, media default) 160 */ 161 162#define TIPC_MIN_LINK_PRI 0 163#define TIPC_DEF_LINK_PRI 10 164#define TIPC_MAX_LINK_PRI 31 165#define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) 166 167/* 168 * Link tolerance limits (min, default, max), in ms 169 */ 170 171#define TIPC_MIN_LINK_TOL 50 172#define TIPC_DEF_LINK_TOL 1500 173#define TIPC_MAX_LINK_TOL 30000 174 175#if (TIPC_MIN_LINK_TOL < 16) 176#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)" 177#endif 178 179/* 180 * Link window limits (min, default, max), in packets 181 */ 182 183#define TIPC_MIN_LINK_WIN 16 184#define TIPC_DEF_LINK_WIN 50 185#define TIPC_MAX_LINK_WIN 8191 186 187 188struct tipc_node_info { 189 __be32 addr; /* network address of node */ 190 __be32 up; /* 0=down, 1= up */ 191}; 192 193struct tipc_link_info { 194 __be32 dest; /* network address of peer node */ 195 __be32 up; /* 0=down, 1=up */ 196 char str[TIPC_MAX_LINK_NAME]; /* link name */ 197}; 198 199struct tipc_bearer_config { 200 __be32 priority; /* Range [1,31]. Override per link */ 201 __be32 disc_domain; /* <Z.C.N> describing desired nodes */ 202 char name[TIPC_MAX_BEARER_NAME]; 203}; 204 205struct tipc_link_config { 206 __be32 value; 207 char name[TIPC_MAX_LINK_NAME]; 208}; 209 210#define TIPC_NTQ_ALLTYPES 0x80000000 211 212struct tipc_name_table_query { 213 __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ 214 __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ 215 __be32 lowbound; /* (i.e. displays all entries of name table) */ 216 __be32 upbound; 217}; 218 219/* 220 * The error string TLV is a null-terminated string describing the cause 221 * of the request failure. To simplify error processing (and to save space) 222 * the first character of the string can be a special error code character 223 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. 224 */ 225 226#define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ 227#define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ 228#define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ 229#define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ 230#define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ 231#define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ 232 233/* 234 * A TLV consists of a descriptor, followed by the TLV value. 235 * TLV descriptor fields are stored in network byte order; 236 * TLV values must also be stored in network byte order (where applicable). 237 * TLV descriptors must be aligned to addresses which are multiple of 4, 238 * so up to 3 bytes of padding may exist at the end of the TLV value area. 239 * There must not be any padding between the TLV descriptor and its value. 240 */ 241 242struct tlv_desc { 243 __be16 tlv_len; /* TLV length (descriptor + value) */ 244 __be16 tlv_type; /* TLV identifier */ 245}; 246 247#define TLV_ALIGNTO 4 248 249#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) 250#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) 251#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) 252#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) 253 254static inline int TLV_OK(const void *tlv, __u16 space) 255{ 256 /* 257 * Would also like to check that "tlv" is a multiple of 4, 258 * but don't know how to do this in a portable way. 259 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler 260 * won't allow binary "&" with a pointer. 261 * - Tried casting "tlv" to integer type, but causes warning about size 262 * mismatch when pointer is bigger than chosen type (int, long, ...). 263 */ 264 265 return (space >= TLV_SPACE(0)) && 266 (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); 267} 268 269static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) 270{ 271 return TLV_OK(tlv, space) && 272 (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); 273} 274 275static inline int TLV_GET_LEN(struct tlv_desc *tlv) 276{ 277 return ntohs(tlv->tlv_len); 278} 279 280static inline void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len) 281{ 282 tlv->tlv_len = htons(len); 283} 284 285static inline int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type) 286{ 287 return (ntohs(tlv->tlv_type) == type); 288} 289 290static inline void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type) 291{ 292 tlv->tlv_type = htons(type); 293} 294 295static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) 296{ 297 struct tlv_desc *tlv_ptr; 298 int tlv_len; 299 300 tlv_len = TLV_LENGTH(len); 301 tlv_ptr = (struct tlv_desc *)tlv; 302 tlv_ptr->tlv_type = htons(type); 303 tlv_ptr->tlv_len = htons(tlv_len); 304 if (len && data) 305 memcpy(TLV_DATA(tlv_ptr), data, tlv_len); 306 return TLV_SPACE(len); 307} 308 309/* 310 * A TLV list descriptor simplifies processing of messages 311 * containing multiple TLVs. 312 */ 313 314struct tlv_list_desc { 315 struct tlv_desc *tlv_ptr; /* ptr to current TLV */ 316 __u32 tlv_space; /* # bytes from curr TLV to list end */ 317}; 318 319static inline void TLV_LIST_INIT(struct tlv_list_desc *list, 320 void *data, __u32 space) 321{ 322 list->tlv_ptr = (struct tlv_desc *)data; 323 list->tlv_space = space; 324} 325 326static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list) 327{ 328 return (list->tlv_space == 0); 329} 330 331static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) 332{ 333 return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); 334} 335 336static inline void *TLV_LIST_DATA(struct tlv_list_desc *list) 337{ 338 return TLV_DATA(list->tlv_ptr); 339} 340 341static inline void TLV_LIST_STEP(struct tlv_list_desc *list) 342{ 343 __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); 344 345 list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); 346 list->tlv_space -= tlv_space; 347} 348 349/* 350 * Configuration messages exchanged via NETLINK_GENERIC use the following 351 * family id, name, version and command. 352 */ 353#define TIPC_GENL_NAME "TIPC" 354#define TIPC_GENL_VERSION 0x1 355#define TIPC_GENL_CMD 0x1 356 357/* 358 * TIPC specific header used in NETLINK_GENERIC requests. 359 */ 360struct tipc_genlmsghdr { 361 __u32 dest; /* Destination address */ 362 __u16 cmd; /* Command */ 363 __u16 reserved; /* Unused */ 364}; 365 366#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) 367 368/* 369 * Configuration messages exchanged via TIPC sockets use the TIPC configuration 370 * message header, which is defined below. This structure is analogous 371 * to the Netlink message header, but fields are stored in network byte order 372 * and no padding is permitted between the header and the message data 373 * that follows. 374 */ 375 376struct tipc_cfg_msg_hdr { 377 __be32 tcm_len; /* Message length (including header) */ 378 __be16 tcm_type; /* Command type */ 379 __be16 tcm_flags; /* Additional flags */ 380 char tcm_reserved[8]; /* Unused */ 381}; 382 383#define TCM_F_REQUEST 0x1 /* Flag: Request message */ 384#define TCM_F_MORE 0x2 /* Flag: Message to be continued */ 385 386#define TCM_ALIGN(datalen) (((datalen)+3) & ~3) 387#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) 388#define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) 389#define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) 390 391static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, 392 void *data, __u16 data_len) 393{ 394 struct tipc_cfg_msg_hdr *tcm_hdr; 395 int msg_len; 396 397 msg_len = TCM_LENGTH(data_len); 398 tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; 399 tcm_hdr->tcm_len = htonl(msg_len); 400 tcm_hdr->tcm_type = htons(cmd); 401 tcm_hdr->tcm_flags = htons(flags); 402 if (data_len && data) 403 memcpy(TCM_DATA(msg), data, data_len); 404 return TCM_SPACE(data_len); 405} 406 407#endif 408