hwc_utils.cpp revision 94f50bebdee0b3ab9deb6d51426c542407ced5fd
1/* 2 * Copyright (C) 2010 The Android Open Source Project 3 * Copyright (C) 2012-2013, The Linux Foundation All rights reserved. 4 * 5 * Not a Contribution, Apache license notifications and license are retained 6 * for attribution purposes only. 7 * 8 * Licensed under the Apache License, Version 2.0 (the "License"); 9 * you may not use this file except in compliance with the License. 10 * You may obtain a copy of the License at 11 * 12 * http://www.apache.org/licenses/LICENSE-2.0 13 * 14 * Unless required by applicable law or agreed to in writing, software 15 * distributed under the License is distributed on an "AS IS" BASIS, 16 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 17 * See the License for the specific language governing permissions and 18 * limitations under the License. 19 */ 20#define ATRACE_TAG (ATRACE_TAG_GRAPHICS | ATRACE_TAG_HAL) 21#define HWC_UTILS_DEBUG 0 22#include <math.h> 23#include <sys/ioctl.h> 24#include <linux/fb.h> 25#include <binder/IServiceManager.h> 26#include <EGL/egl.h> 27#include <cutils/properties.h> 28#include <utils/Trace.h> 29#include <gralloc_priv.h> 30#include <overlay.h> 31#include <overlayRotator.h> 32#include <overlayWriteback.h> 33#include "hwc_utils.h" 34#include "hwc_mdpcomp.h" 35#include "hwc_fbupdate.h" 36#include "hwc_ad.h" 37#include "mdp_version.h" 38#include "hwc_copybit.h" 39#include "hwc_dump_layers.h" 40#include "hwc_vpuclient.h" 41#include "external.h" 42#include "virtual.h" 43#include "hwc_qclient.h" 44#include "QService.h" 45#include "comptype.h" 46 47using namespace qClient; 48using namespace qService; 49using namespace android; 50using namespace overlay; 51using namespace overlay::utils; 52namespace ovutils = overlay::utils; 53 54namespace qhwc { 55 56static int openFramebufferDevice(hwc_context_t *ctx) 57{ 58 struct fb_fix_screeninfo finfo; 59 struct fb_var_screeninfo info; 60 61 int fb_fd = openFb(HWC_DISPLAY_PRIMARY); 62 if(fb_fd < 0) { 63 ALOGE("%s: Error Opening FB : %s", __FUNCTION__, strerror(errno)); 64 return -errno; 65 } 66 67 if (ioctl(fb_fd, FBIOGET_VSCREENINFO, &info) == -1) { 68 ALOGE("%s:Error in ioctl FBIOGET_VSCREENINFO: %s", __FUNCTION__, 69 strerror(errno)); 70 close(fb_fd); 71 return -errno; 72 } 73 74 if (int(info.width) <= 0 || int(info.height) <= 0) { 75 // the driver doesn't return that information 76 // default to 160 dpi 77 info.width = ((info.xres * 25.4f)/160.0f + 0.5f); 78 info.height = ((info.yres * 25.4f)/160.0f + 0.5f); 79 } 80 81 float xdpi = (info.xres * 25.4f) / info.width; 82 float ydpi = (info.yres * 25.4f) / info.height; 83 84#ifdef MSMFB_METADATA_GET 85 struct msmfb_metadata metadata; 86 memset(&metadata, 0 , sizeof(metadata)); 87 metadata.op = metadata_op_frame_rate; 88 89 if (ioctl(fb_fd, MSMFB_METADATA_GET, &metadata) == -1) { 90 ALOGE("%s:Error retrieving panel frame rate: %s", __FUNCTION__, 91 strerror(errno)); 92 close(fb_fd); 93 return -errno; 94 } 95 96 float fps = metadata.data.panel_frame_rate; 97#else 98 //XXX: Remove reserved field usage on all baselines 99 //The reserved[3] field is used to store FPS by the driver. 100 float fps = info.reserved[3] & 0xFF; 101#endif 102 103 if (ioctl(fb_fd, FBIOGET_FSCREENINFO, &finfo) == -1) { 104 ALOGE("%s:Error in ioctl FBIOGET_FSCREENINFO: %s", __FUNCTION__, 105 strerror(errno)); 106 close(fb_fd); 107 return -errno; 108 } 109 110 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd = fb_fd; 111 //xres, yres may not be 32 aligned 112 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].stride = finfo.line_length /(info.xres/8); 113 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres = info.xres; 114 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres = info.yres; 115 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xdpi = xdpi; 116 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].ydpi = ydpi; 117 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].vsync_period = 1000000000l / fps; 118 119 //Unblank primary on first boot 120 if(ioctl(fb_fd, FBIOBLANK,FB_BLANK_UNBLANK) < 0) { 121 ALOGE("%s: Failed to unblank display", __FUNCTION__); 122 return -errno; 123 } 124 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].isActive = true; 125 126 return 0; 127} 128 129void initContext(hwc_context_t *ctx) 130{ 131 openFramebufferDevice(ctx); 132 ctx->mMDP.version = qdutils::MDPVersion::getInstance().getMDPVersion(); 133 ctx->mMDP.hasOverlay = qdutils::MDPVersion::getInstance().hasOverlay(); 134 ctx->mMDP.panel = qdutils::MDPVersion::getInstance().getPanelType(); 135 overlay::Overlay::initOverlay(); 136 ctx->mOverlay = overlay::Overlay::getInstance(); 137 ctx->mRotMgr = new RotMgr(); 138 139 //Is created and destroyed only once for primary 140 //For external it could get created and destroyed multiple times depending 141 //on what external we connect to. 142 ctx->mFBUpdate[HWC_DISPLAY_PRIMARY] = 143 IFBUpdate::getObject(ctx, HWC_DISPLAY_PRIMARY); 144 145 // Check if the target supports copybit compostion (dyn/mdp/c2d) to 146 // decide if we need to open the copybit module. 147 int compositionType = 148 qdutils::QCCompositionType::getInstance().getCompositionType(); 149 150 if (compositionType & (qdutils::COMPOSITION_TYPE_DYN | 151 qdutils::COMPOSITION_TYPE_MDP | 152 qdutils::COMPOSITION_TYPE_C2D)) { 153 ctx->mCopyBit[HWC_DISPLAY_PRIMARY] = new CopyBit(); 154 } 155 156 ctx->mExtDisplay = new ExternalDisplay(ctx); 157 ctx->mVirtualDisplay = new VirtualDisplay(ctx); 158 ctx->mVirtualonExtActive = false; 159 ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].isActive = false; 160 ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].connected = false; 161 ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].isActive = false; 162 ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].connected = false; 163 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].mDownScaleMode= false; 164 ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].mDownScaleMode = false; 165 ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].mDownScaleMode = false; 166 167 ctx->mMDPComp[HWC_DISPLAY_PRIMARY] = 168 MDPComp::getObject(ctx, HWC_DISPLAY_PRIMARY); 169 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].connected = true; 170 171 for (uint32_t i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { 172 ctx->mHwcDebug[i] = new HwcDebug(i); 173 ctx->mLayerRotMap[i] = new LayerRotMap(); 174 } 175 176 MDPComp::init(ctx); 177 ctx->mAD = new AssertiveDisplay(ctx); 178 179 ctx->vstate.enable = false; 180 ctx->vstate.fakevsync = false; 181 ctx->mExtOrientation = 0; 182 183 //Right now hwc starts the service but anybody could do it, or it could be 184 //independent process as well. 185 QService::init(); 186 sp<IQClient> client = new QClient(ctx); 187 interface_cast<IQService>( 188 defaultServiceManager()->getService( 189 String16("display.qservice")))->connect(client); 190 191 // Initialize "No animation on external display" related parameters. 192 ctx->deviceOrientation = 0; 193 ctx->mPrevCropVideo.left = ctx->mPrevCropVideo.top = 194 ctx->mPrevCropVideo.right = ctx->mPrevCropVideo.bottom = 0; 195 ctx->mPrevDestVideo.left = ctx->mPrevDestVideo.top = 196 ctx->mPrevDestVideo.right = ctx->mPrevDestVideo.bottom = 0; 197 ctx->mPrevTransformVideo = 0; 198 ctx->mBufferMirrorMode = false; 199#ifdef VPU_TARGET 200 ctx->mVPUClient = new VPUClient(); 201#endif 202 203 ALOGI("Initializing Qualcomm Hardware Composer"); 204 ALOGI("MDP version: %d", ctx->mMDP.version); 205} 206 207void closeContext(hwc_context_t *ctx) 208{ 209 if(ctx->mOverlay) { 210 delete ctx->mOverlay; 211 ctx->mOverlay = NULL; 212 } 213 214 if(ctx->mRotMgr) { 215 delete ctx->mRotMgr; 216 ctx->mRotMgr = NULL; 217 } 218 219 for(int i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { 220 if(ctx->mCopyBit[i]) { 221 delete ctx->mCopyBit[i]; 222 ctx->mCopyBit[i] = NULL; 223 } 224 } 225 226 if(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd) { 227 close(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd); 228 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd = -1; 229 } 230 231 if(ctx->mExtDisplay) { 232 delete ctx->mExtDisplay; 233 ctx->mExtDisplay = NULL; 234 } 235 236#ifdef VPU_TARGET 237 if(ctx->mVPUClient) { 238 delete ctx->mVPUClient; 239 } 240#endif 241 242 for(int i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { 243 if(ctx->mFBUpdate[i]) { 244 delete ctx->mFBUpdate[i]; 245 ctx->mFBUpdate[i] = NULL; 246 } 247 if(ctx->mMDPComp[i]) { 248 delete ctx->mMDPComp[i]; 249 ctx->mMDPComp[i] = NULL; 250 } 251 if(ctx->mHwcDebug[i]) { 252 delete ctx->mHwcDebug[i]; 253 ctx->mHwcDebug[i] = NULL; 254 } 255 if(ctx->mLayerRotMap[i]) { 256 delete ctx->mLayerRotMap[i]; 257 ctx->mLayerRotMap[i] = NULL; 258 } 259 } 260 if(ctx->mAD) { 261 delete ctx->mAD; 262 ctx->mAD = NULL; 263 } 264 265 266} 267 268 269void dumpsys_log(android::String8& buf, const char* fmt, ...) 270{ 271 va_list varargs; 272 va_start(varargs, fmt); 273 buf.appendFormatV(fmt, varargs); 274 va_end(varargs); 275} 276 277int getExtOrientation(hwc_context_t* ctx) { 278 int extOrient = ctx->mExtOrientation; 279 if(ctx->mBufferMirrorMode) 280 extOrient = getMirrorModeOrientation(ctx); 281 return extOrient; 282} 283 284/* Calculates the destination position based on the action safe rectangle */ 285void getActionSafePosition(hwc_context_t *ctx, int dpy, hwc_rect_t& rect) { 286 // Position 287 int x = rect.left, y = rect.top; 288 int w = rect.right - rect.left; 289 int h = rect.bottom - rect.top; 290 291 // if external supports underscan, do nothing 292 // it will be taken care in the driver 293 if(ctx->mExtDisplay->isCEUnderscanSupported()) 294 return; 295 296 char value[PROPERTY_VALUE_MAX]; 297 // Read action safe properties 298 property_get("persist.sys.actionsafe.width", value, "0"); 299 int asWidthRatio = atoi(value); 300 property_get("persist.sys.actionsafe.height", value, "0"); 301 int asHeightRatio = atoi(value); 302 303 if(!asWidthRatio && !asHeightRatio) { 304 //No action safe ratio set, return 305 return; 306 } 307 308 float wRatio = 1.0; 309 float hRatio = 1.0; 310 float xRatio = 1.0; 311 float yRatio = 1.0; 312 313 float fbWidth = ctx->dpyAttr[dpy].xres; 314 float fbHeight = ctx->dpyAttr[dpy].yres; 315 316 // Since external is rotated 90, need to swap width/height 317 int extOrient = getExtOrientation(ctx); 318 319 if(extOrient & HWC_TRANSFORM_ROT_90) 320 swap(fbWidth, fbHeight); 321 322 float asX = 0; 323 float asY = 0; 324 float asW = fbWidth; 325 float asH= fbHeight; 326 327 // based on the action safe ratio, get the Action safe rectangle 328 asW = fbWidth * (1.0f - asWidthRatio / 100.0f); 329 asH = fbHeight * (1.0f - asHeightRatio / 100.0f); 330 asX = (fbWidth - asW) / 2; 331 asY = (fbHeight - asH) / 2; 332 333 // calculate the position ratio 334 xRatio = (float)x/fbWidth; 335 yRatio = (float)y/fbHeight; 336 wRatio = (float)w/fbWidth; 337 hRatio = (float)h/fbHeight; 338 339 //Calculate the position... 340 x = (xRatio * asW) + asX; 341 y = (yRatio * asH) + asY; 342 w = (wRatio * asW); 343 h = (hRatio * asH); 344 345 // Convert it back to hwc_rect_t 346 rect.left = x; 347 rect.top = y; 348 rect.right = w + rect.left; 349 rect.bottom = h + rect.top; 350 351 return; 352} 353 354/* Calculates the aspect ratio for based on src & dest */ 355void getAspectRatioPosition(int destWidth, int destHeight, int srcWidth, 356 int srcHeight, hwc_rect_t& rect) { 357 int x =0, y =0; 358 359 if (srcWidth * destHeight > destWidth * srcHeight) { 360 srcHeight = destWidth * srcHeight / srcWidth; 361 srcWidth = destWidth; 362 } else if (srcWidth * destHeight < destWidth * srcHeight) { 363 srcWidth = destHeight * srcWidth / srcHeight; 364 srcHeight = destHeight; 365 } else { 366 srcWidth = destWidth; 367 srcHeight = destHeight; 368 } 369 if (srcWidth > destWidth) srcWidth = destWidth; 370 if (srcHeight > destHeight) srcHeight = destHeight; 371 x = (destWidth - srcWidth) / 2; 372 y = (destHeight - srcHeight) / 2; 373 ALOGD_IF(HWC_UTILS_DEBUG, "%s: AS Position: x = %d, y = %d w = %d h = %d", 374 __FUNCTION__, x, y, srcWidth , srcHeight); 375 // Convert it back to hwc_rect_t 376 rect.left = x; 377 rect.top = y; 378 rect.right = srcWidth + rect.left; 379 rect.bottom = srcHeight + rect.top; 380} 381 382// This function gets the destination position for Seconday display 383// based on the position and aspect ratio with orientation 384void getAspectRatioPosition(hwc_context_t* ctx, int dpy, int extOrientation, 385 hwc_rect_t& inRect, hwc_rect_t& outRect) { 386 // Physical display resolution 387 float fbWidth = ctx->dpyAttr[dpy].xres; 388 float fbHeight = ctx->dpyAttr[dpy].yres; 389 //display position(x,y,w,h) in correct aspectratio after rotation 390 int xPos = 0; 391 int yPos = 0; 392 float width = fbWidth; 393 float height = fbHeight; 394 // Width/Height used for calculation, after rotation 395 float actualWidth = fbWidth; 396 float actualHeight = fbHeight; 397 398 float wRatio = 1.0; 399 float hRatio = 1.0; 400 float xRatio = 1.0; 401 float yRatio = 1.0; 402 hwc_rect_t rect = {0, 0, (int)fbWidth, (int)fbHeight}; 403 404 Dim inPos(inRect.left, inRect.top, inRect.right - inRect.left, 405 inRect.bottom - inRect.top); 406 Dim outPos(outRect.left, outRect.top, outRect.right - outRect.left, 407 outRect.bottom - outRect.top); 408 409 Whf whf(fbWidth, fbHeight, 0); 410 eTransform extorient = static_cast<eTransform>(extOrientation); 411 // To calculate the destination co-ordinates in the new orientation 412 preRotateSource(extorient, whf, inPos); 413 414 if(extOrientation & HAL_TRANSFORM_ROT_90) { 415 // Swap width/height for input position 416 swapWidthHeight(actualWidth, actualHeight); 417 getAspectRatioPosition(fbWidth, fbHeight, (int)actualWidth, 418 (int)actualHeight, rect); 419 xPos = rect.left; 420 yPos = rect.top; 421 width = rect.right - rect.left; 422 height = rect.bottom - rect.top; 423 } 424 425 //Calculate the position... 426 xRatio = inPos.x/actualWidth; 427 yRatio = inPos.y/actualHeight; 428 wRatio = inPos.w/actualWidth; 429 hRatio = inPos.h/actualHeight; 430 431 outPos.x = (xRatio * width) + xPos; 432 outPos.y = (yRatio * height) + yPos; 433 outPos.w = wRatio * width; 434 outPos.h = hRatio * height; 435 ALOGD_IF(HWC_UTILS_DEBUG, "%s: Calculated AspectRatio Position: x = %d," 436 "y = %d w = %d h = %d", __FUNCTION__, outPos.x, outPos.y, 437 outPos.w, outPos.h); 438 439 // For sidesync, the dest fb will be in portrait orientation, and the crop 440 // will be updated to avoid the black side bands, and it will be upscaled 441 // to fit the dest RB, so recalculate 442 // the position based on the new width and height 443 if ((extOrientation & HWC_TRANSFORM_ROT_90) && 444 isOrientationPortrait(ctx)) { 445 hwc_rect_t r; 446 //Calculate the position 447 xRatio = (outPos.x - xPos)/width; 448 // GetaspectRatio -- tricky to get the correct aspect ratio 449 // But we need to do this. 450 getAspectRatioPosition(width, height, width, height, r); 451 xPos = r.left; 452 yPos = r.top; 453 float tempWidth = r.right - r.left; 454 float tempHeight = r.bottom - r.top; 455 yRatio = yPos/height; 456 wRatio = outPos.w/width; 457 hRatio = tempHeight/height; 458 459 //Map the coordinates back to Framebuffer domain 460 outPos.x = (xRatio * fbWidth); 461 outPos.y = (yRatio * fbHeight); 462 outPos.w = wRatio * fbWidth; 463 outPos.h = hRatio * fbHeight; 464 465 ALOGD_IF(HWC_UTILS_DEBUG, "%s: Calculated AspectRatio for device in" 466 "portrait: x = %d,y = %d w = %d h = %d", __FUNCTION__, 467 outPos.x, outPos.y, 468 outPos.w, outPos.h); 469 } 470 if(ctx->dpyAttr[dpy].mDownScaleMode) { 471 int extW, extH; 472 if(dpy == HWC_DISPLAY_EXTERNAL) 473 ctx->mExtDisplay->getAttributes(extW, extH); 474 else 475 ctx->mVirtualDisplay->getAttributes(extW, extH); 476 fbWidth = ctx->dpyAttr[dpy].xres; 477 fbHeight = ctx->dpyAttr[dpy].yres; 478 //Calculate the position... 479 xRatio = outPos.x/fbWidth; 480 yRatio = outPos.y/fbHeight; 481 wRatio = outPos.w/fbWidth; 482 hRatio = outPos.h/fbHeight; 483 484 outPos.x = xRatio * extW; 485 outPos.y = yRatio * extH; 486 outPos.w = wRatio * extW; 487 outPos.h = hRatio * extH; 488 } 489 // Convert Dim to hwc_rect_t 490 outRect.left = outPos.x; 491 outRect.top = outPos.y; 492 outRect.right = outPos.x + outPos.w; 493 outRect.bottom = outPos.y + outPos.h; 494 495 return; 496} 497 498bool isPrimaryPortrait(hwc_context_t *ctx) { 499 int fbWidth = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; 500 int fbHeight = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; 501 if(fbWidth < fbHeight) { 502 return true; 503 } 504 return false; 505} 506 507bool isOrientationPortrait(hwc_context_t *ctx) { 508 if(isPrimaryPortrait(ctx)) { 509 return !(ctx->deviceOrientation & 0x1); 510 } 511 return (ctx->deviceOrientation & 0x1); 512} 513 514void calcExtDisplayPosition(hwc_context_t *ctx, 515 private_handle_t *hnd, 516 int dpy, 517 hwc_rect_t& sourceCrop, 518 hwc_rect_t& displayFrame, 519 int& transform, 520 ovutils::eTransform& orient) { 521 // Swap width and height when there is a 90deg transform 522 int extOrient = getExtOrientation(ctx); 523 if(dpy && !qdutils::MDPVersion::getInstance().is8x26()) { 524 if(!isYuvBuffer(hnd)) { 525 if(extOrient & HWC_TRANSFORM_ROT_90) { 526 int dstWidth = ctx->dpyAttr[dpy].xres; 527 int dstHeight = ctx->dpyAttr[dpy].yres;; 528 int srcWidth = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; 529 int srcHeight = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; 530 if(!isPrimaryPortrait(ctx)) { 531 swap(srcWidth, srcHeight); 532 } // Get Aspect Ratio for external 533 getAspectRatioPosition(dstWidth, dstHeight, srcWidth, 534 srcHeight, displayFrame); 535 // Crop - this is needed, because for sidesync, the dest fb will 536 // be in portrait orientation, so update the crop to not show the 537 // black side bands. 538 if (isOrientationPortrait(ctx)) { 539 sourceCrop = displayFrame; 540 displayFrame.left = 0; 541 displayFrame.top = 0; 542 displayFrame.right = dstWidth; 543 displayFrame.bottom = dstHeight; 544 } 545 } 546 if(ctx->dpyAttr[dpy].mDownScaleMode) { 547 int extW, extH; 548 // if downscale is enabled, map the co-ordinates to new 549 // domain(downscaled) 550 float fbWidth = ctx->dpyAttr[dpy].xres; 551 float fbHeight = ctx->dpyAttr[dpy].yres; 552 // query MDP configured attributes 553 if(dpy == HWC_DISPLAY_EXTERNAL) 554 ctx->mExtDisplay->getAttributes(extW, extH); 555 else 556 ctx->mVirtualDisplay->getAttributes(extW, extH); 557 //Calculate the ratio... 558 float wRatio = ((float)extW)/fbWidth; 559 float hRatio = ((float)extH)/fbHeight; 560 561 //convert Dim to hwc_rect_t 562 displayFrame.left *= wRatio; 563 displayFrame.top *= hRatio; 564 displayFrame.right *= wRatio; 565 displayFrame.bottom *= hRatio; 566 } 567 }else { 568 if(extOrient || ctx->dpyAttr[dpy].mDownScaleMode) { 569 getAspectRatioPosition(ctx, dpy, extOrient, 570 displayFrame, displayFrame); 571 } 572 } 573 // If there is a external orientation set, use that 574 if(extOrient) { 575 transform = extOrient; 576 orient = static_cast<ovutils::eTransform >(extOrient); 577 } 578 // Calculate the actionsafe dimensions for External(dpy = 1 or 2) 579 getActionSafePosition(ctx, dpy, displayFrame); 580 } 581} 582 583/* Returns the orientation which needs to be set on External for 584 * SideSync/Buffer Mirrormode 585 */ 586int getMirrorModeOrientation(hwc_context_t *ctx) { 587 int extOrientation = 0; 588 int deviceOrientation = ctx->deviceOrientation; 589 if(!isPrimaryPortrait(ctx)) 590 deviceOrientation = (deviceOrientation + 1) % 4; 591 if (deviceOrientation == 0) 592 extOrientation = HWC_TRANSFORM_ROT_270; 593 else if (deviceOrientation == 1)//90 594 extOrientation = 0; 595 else if (deviceOrientation == 2)//180 596 extOrientation = HWC_TRANSFORM_ROT_90; 597 else if (deviceOrientation == 3)//270 598 extOrientation = HWC_TRANSFORM_FLIP_V | HWC_TRANSFORM_FLIP_H; 599 600 return extOrientation; 601} 602 603bool needsScaling(hwc_context_t* ctx, hwc_layer_1_t const* layer, 604 const int& dpy) { 605 int dst_w, dst_h, src_w, src_h; 606 607 hwc_rect_t displayFrame = layer->displayFrame; 608 hwc_rect_t sourceCrop = layer->sourceCrop; 609 trimLayer(ctx, dpy, layer->transform, sourceCrop, displayFrame); 610 611 dst_w = displayFrame.right - displayFrame.left; 612 dst_h = displayFrame.bottom - displayFrame.top; 613 src_w = sourceCrop.right - sourceCrop.left; 614 src_h = sourceCrop.bottom - sourceCrop.top; 615 616 if(((src_w != dst_w) || (src_h != dst_h))) 617 return true; 618 619 return false; 620} 621 622// Checks if layer needs scaling with split 623bool needsScalingWithSplit(hwc_context_t* ctx, hwc_layer_1_t const* layer, 624 const int& dpy) { 625 626 int src_width_l, src_height_l; 627 int src_width_r, src_height_r; 628 int dst_width_l, dst_height_l; 629 int dst_width_r, dst_height_r; 630 int hw_w = ctx->dpyAttr[dpy].xres; 631 int hw_h = ctx->dpyAttr[dpy].yres; 632 hwc_rect_t cropL, dstL, cropR, dstR; 633 const int lSplit = getLeftSplit(ctx, dpy); 634 hwc_rect_t sourceCrop = layer->sourceCrop; 635 hwc_rect_t displayFrame = layer->displayFrame; 636 private_handle_t *hnd = (private_handle_t *)layer->handle; 637 trimLayer(ctx, dpy, layer->transform, sourceCrop, displayFrame); 638 639 cropL = sourceCrop; 640 dstL = displayFrame; 641 hwc_rect_t scissorL = { 0, 0, lSplit, hw_h }; 642 qhwc::calculate_crop_rects(cropL, dstL, scissorL, 0); 643 644 cropR = sourceCrop; 645 dstR = displayFrame; 646 hwc_rect_t scissorR = { lSplit, 0, hw_w, hw_h }; 647 qhwc::calculate_crop_rects(cropR, dstR, scissorR, 0); 648 649 // Sanitize Crop to stitch 650 sanitizeSourceCrop(cropL, cropR, hnd); 651 652 // Calculate the left dst 653 dst_width_l = dstL.right - dstL.left; 654 dst_height_l = dstL.bottom - dstL.top; 655 src_width_l = cropL.right - cropL.left; 656 src_height_l = cropL.bottom - cropL.top; 657 658 // check if there is any scaling on the left 659 if(((src_width_l != dst_width_l) || (src_height_l != dst_height_l))) 660 return true; 661 662 // Calculate the right dst 663 dst_width_r = dstR.right - dstR.left; 664 dst_height_r = dstR.bottom - dstR.top; 665 src_width_r = cropR.right - cropR.left; 666 src_height_r = cropR.bottom - cropR.top; 667 668 // check if there is any scaling on the right 669 if(((src_width_r != dst_width_r) || (src_height_r != dst_height_r))) 670 return true; 671 672 return false; 673} 674 675bool isAlphaScaled(hwc_context_t* ctx, hwc_layer_1_t const* layer, 676 const int& dpy) { 677 if(needsScaling(ctx, layer, dpy) && isAlphaPresent(layer)) { 678 return true; 679 } 680 return false; 681} 682 683bool isAlphaPresent(hwc_layer_1_t const* layer) { 684 private_handle_t *hnd = (private_handle_t *)layer->handle; 685 if(hnd) { 686 int format = hnd->format; 687 switch(format) { 688 case HAL_PIXEL_FORMAT_RGBA_8888: 689 case HAL_PIXEL_FORMAT_BGRA_8888: 690 // In any more formats with Alpha go here.. 691 return true; 692 default : return false; 693 } 694 } 695 return false; 696} 697 698void setListStats(hwc_context_t *ctx, 699 const hwc_display_contents_1_t *list, int dpy) { 700 const int prevYuvCount = ctx->listStats[dpy].yuvCount; 701 memset(&ctx->listStats[dpy], 0, sizeof(ListStats)); 702 ctx->listStats[dpy].numAppLayers = list->numHwLayers - 1; 703 ctx->listStats[dpy].fbLayerIndex = list->numHwLayers - 1; 704 ctx->listStats[dpy].skipCount = 0; 705 ctx->listStats[dpy].needsAlphaScale = false; 706 ctx->listStats[dpy].preMultipliedAlpha = false; 707 ctx->listStats[dpy].isSecurePresent = false; 708 ctx->listStats[dpy].yuvCount = 0; 709 char property[PROPERTY_VALUE_MAX]; 710 ctx->listStats[dpy].extOnlyLayerIndex = -1; 711 ctx->listStats[dpy].isDisplayAnimating = false; 712 ctx->listStats[dpy].roi = ovutils::Dim(0, 0, 713 (int)ctx->dpyAttr[dpy].xres, (int)ctx->dpyAttr[dpy].yres); 714 ctx->listStats[dpy].secureUI = false; 715 716 optimizeLayerRects(ctx, list, dpy); 717 718 for (size_t i = 0; i < (size_t)ctx->listStats[dpy].numAppLayers; i++) { 719 hwc_layer_1_t const* layer = &list->hwLayers[i]; 720 private_handle_t *hnd = (private_handle_t *)layer->handle; 721 722#ifdef QCOM_BSP 723 if (layer->flags & HWC_SCREENSHOT_ANIMATOR_LAYER) { 724 ctx->listStats[dpy].isDisplayAnimating = true; 725 } 726 if(isSecureDisplayBuffer(hnd)) { 727 ctx->listStats[dpy].secureUI = true; 728 } 729#endif 730 // continue if number of app layers exceeds MAX_NUM_APP_LAYERS 731 if(ctx->listStats[dpy].numAppLayers > MAX_NUM_APP_LAYERS) 732 continue; 733 734 //reset yuv indices 735 ctx->listStats[dpy].yuvIndices[i] = -1; 736 737 if (isSecureBuffer(hnd)) { 738 ctx->listStats[dpy].isSecurePresent = true; 739 } 740 741 if (isSkipLayer(&list->hwLayers[i])) { 742 ctx->listStats[dpy].skipCount++; 743 } 744 745 if (UNLIKELY(isYuvBuffer(hnd))) { 746 int& yuvCount = ctx->listStats[dpy].yuvCount; 747 ctx->listStats[dpy].yuvIndices[yuvCount] = i; 748 yuvCount++; 749 750 if((layer->transform & HWC_TRANSFORM_ROT_90) && 751 canUseRotator(ctx, dpy)) { 752 if( (dpy == HWC_DISPLAY_PRIMARY) && 753 ctx->mOverlay->isPipeTypeAttached(OV_MDP_PIPE_DMA)) { 754 ctx->isPaddingRound = true; 755 } 756 Overlay::setDMAMode(Overlay::DMA_BLOCK_MODE); 757 } 758 } 759 if(layer->blending == HWC_BLENDING_PREMULT) 760 ctx->listStats[dpy].preMultipliedAlpha = true; 761 762 if(!ctx->listStats[dpy].needsAlphaScale) 763 ctx->listStats[dpy].needsAlphaScale = 764 isAlphaScaled(ctx, layer, dpy); 765 766 if(UNLIKELY(isExtOnly(hnd))){ 767 ctx->listStats[dpy].extOnlyLayerIndex = i; 768 } 769 } 770 if(ctx->listStats[dpy].yuvCount > 0) { 771 if (property_get("hw.cabl.yuv", property, NULL) > 0) { 772 if (atoi(property) != 1) { 773 property_set("hw.cabl.yuv", "1"); 774 } 775 } 776 } else { 777 if (property_get("hw.cabl.yuv", property, NULL) > 0) { 778 if (atoi(property) != 0) { 779 property_set("hw.cabl.yuv", "0"); 780 } 781 } 782 } 783 if(dpy) { 784 //uncomment the below code for testing purpose. 785 /* char value[PROPERTY_VALUE_MAX]; 786 property_get("sys.ext_orientation", value, "0"); 787 // Assuming the orientation value is in terms of HAL_TRANSFORM, 788 // This needs mapping to HAL, if its in different convention 789 ctx->mExtOrientation = atoi(value); */ 790 // Assuming the orientation value is in terms of HAL_TRANSFORM, 791 // This needs mapping to HAL, if its in different convention 792 if(ctx->mExtOrientation || ctx->mBufferMirrorMode) { 793 ALOGD_IF(HWC_UTILS_DEBUG, "%s: ext orientation = %d" 794 "BufferMirrorMode = %d", __FUNCTION__, 795 ctx->mExtOrientation, ctx->mBufferMirrorMode); 796 if(ctx->mOverlay->isPipeTypeAttached(OV_MDP_PIPE_DMA)) { 797 ctx->isPaddingRound = true; 798 } 799 Overlay::setDMAMode(Overlay::DMA_BLOCK_MODE); 800 } 801 } 802 803 //The marking of video begin/end is useful on some targets where we need 804 //to have a padding round to be able to shift pipes across mixers. 805 if(prevYuvCount != ctx->listStats[dpy].yuvCount) { 806 ctx->mVideoTransFlag = true; 807 } 808 if(dpy == HWC_DISPLAY_PRIMARY) { 809 ctx->mAD->markDoable(ctx, list); 810 } 811} 812 813 814static void calc_cut(double& leftCutRatio, double& topCutRatio, 815 double& rightCutRatio, double& bottomCutRatio, int orient) { 816 if(orient & HAL_TRANSFORM_FLIP_H) { 817 swap(leftCutRatio, rightCutRatio); 818 } 819 if(orient & HAL_TRANSFORM_FLIP_V) { 820 swap(topCutRatio, bottomCutRatio); 821 } 822 if(orient & HAL_TRANSFORM_ROT_90) { 823 //Anti clock swapping 824 double tmpCutRatio = leftCutRatio; 825 leftCutRatio = topCutRatio; 826 topCutRatio = rightCutRatio; 827 rightCutRatio = bottomCutRatio; 828 bottomCutRatio = tmpCutRatio; 829 } 830} 831 832bool isSecuring(hwc_context_t* ctx, hwc_layer_1_t const* layer) { 833 if((ctx->mMDP.version < qdutils::MDSS_V5) && 834 (ctx->mMDP.version > qdutils::MDP_V3_0) && 835 ctx->mSecuring) { 836 return true; 837 } 838 if (isSecureModePolicy(ctx->mMDP.version)) { 839 private_handle_t *hnd = (private_handle_t *)layer->handle; 840 if(ctx->mSecureMode) { 841 if (! isSecureBuffer(hnd)) { 842 ALOGD_IF(HWC_UTILS_DEBUG,"%s:Securing Turning ON ...", 843 __FUNCTION__); 844 return true; 845 } 846 } else { 847 if (isSecureBuffer(hnd)) { 848 ALOGD_IF(HWC_UTILS_DEBUG,"%s:Securing Turning OFF ...", 849 __FUNCTION__); 850 return true; 851 } 852 } 853 } 854 return false; 855} 856 857bool isSecureModePolicy(int mdpVersion) { 858 if (mdpVersion < qdutils::MDSS_V5) 859 return true; 860 else 861 return false; 862} 863 864int getBlending(int blending) { 865 switch(blending) { 866 case HWC_BLENDING_NONE: 867 return overlay::utils::OVERLAY_BLENDING_OPAQUE; 868 case HWC_BLENDING_PREMULT: 869 return overlay::utils::OVERLAY_BLENDING_PREMULT; 870 case HWC_BLENDING_COVERAGE : 871 default: 872 return overlay::utils::OVERLAY_BLENDING_COVERAGE; 873 } 874} 875 876//Crops source buffer against destination and FB boundaries 877void calculate_crop_rects(hwc_rect_t& crop, hwc_rect_t& dst, 878 const hwc_rect_t& scissor, int orient) { 879 880 int& crop_l = crop.left; 881 int& crop_t = crop.top; 882 int& crop_r = crop.right; 883 int& crop_b = crop.bottom; 884 int crop_w = crop.right - crop.left; 885 int crop_h = crop.bottom - crop.top; 886 887 int& dst_l = dst.left; 888 int& dst_t = dst.top; 889 int& dst_r = dst.right; 890 int& dst_b = dst.bottom; 891 int dst_w = abs(dst.right - dst.left); 892 int dst_h = abs(dst.bottom - dst.top); 893 894 const int& sci_l = scissor.left; 895 const int& sci_t = scissor.top; 896 const int& sci_r = scissor.right; 897 const int& sci_b = scissor.bottom; 898 int sci_w = abs(sci_r - sci_l); 899 int sci_h = abs(sci_b - sci_t); 900 901 double leftCutRatio = 0.0, rightCutRatio = 0.0, topCutRatio = 0.0, 902 bottomCutRatio = 0.0; 903 904 if(dst_l < sci_l) { 905 leftCutRatio = (double)(sci_l - dst_l) / (double)dst_w; 906 dst_l = sci_l; 907 } 908 909 if(dst_r > sci_r) { 910 rightCutRatio = (double)(dst_r - sci_r) / (double)dst_w; 911 dst_r = sci_r; 912 } 913 914 if(dst_t < sci_t) { 915 topCutRatio = (double)(sci_t - dst_t) / (double)dst_h; 916 dst_t = sci_t; 917 } 918 919 if(dst_b > sci_b) { 920 bottomCutRatio = (double)(dst_b - sci_b) / (double)dst_h; 921 dst_b = sci_b; 922 } 923 924 calc_cut(leftCutRatio, topCutRatio, rightCutRatio, bottomCutRatio, orient); 925 crop_l += crop_w * leftCutRatio; 926 crop_t += crop_h * topCutRatio; 927 crop_r -= crop_w * rightCutRatio; 928 crop_b -= crop_h * bottomCutRatio; 929} 930 931bool areLayersIntersecting(const hwc_layer_1_t* layer1, 932 const hwc_layer_1_t* layer2) { 933 hwc_rect_t irect = getIntersection(layer1->displayFrame, 934 layer2->displayFrame); 935 return isValidRect(irect); 936} 937 938bool isValidRect(const hwc_rect& rect) 939{ 940 return ((rect.bottom > rect.top) && (rect.right > rect.left)) ; 941} 942 943/* computes the intersection of two rects */ 944hwc_rect_t getIntersection(const hwc_rect_t& rect1, const hwc_rect_t& rect2) 945{ 946 hwc_rect_t res; 947 948 if(!isValidRect(rect1) || !isValidRect(rect2)){ 949 return (hwc_rect_t){0, 0, 0, 0}; 950 } 951 952 953 res.left = max(rect1.left, rect2.left); 954 res.top = max(rect1.top, rect2.top); 955 res.right = min(rect1.right, rect2.right); 956 res.bottom = min(rect1.bottom, rect2.bottom); 957 958 if(!isValidRect(res)) 959 return (hwc_rect_t){0, 0, 0, 0}; 960 961 return res; 962} 963 964/* computes the union of two rects */ 965hwc_rect_t getUnion(const hwc_rect &rect1, const hwc_rect &rect2) 966{ 967 hwc_rect_t res; 968 969 if(!isValidRect(rect1)){ 970 return rect2; 971 } 972 973 if(!isValidRect(rect2)){ 974 return rect1; 975 } 976 977 res.left = min(rect1.left, rect2.left); 978 res.top = min(rect1.top, rect2.top); 979 res.right = max(rect1.right, rect2.right); 980 res.bottom = max(rect1.bottom, rect2.bottom); 981 982 return res; 983} 984 985/* deducts given rect from layers display-frame and source crop. 986 also it avoid hole creation.*/ 987void deductRect(const hwc_layer_1_t* layer, hwc_rect_t& irect) { 988 hwc_rect_t& disprect = (hwc_rect_t&)layer->displayFrame; 989 hwc_rect_t& srcrect = (hwc_rect_t&)layer->sourceCrop; 990 int irect_w = irect.right - irect.left; 991 int irect_h = irect.bottom - irect.top; 992 993 if((disprect.left == irect.left) && (disprect.right == irect.right)) { 994 if((disprect.top == irect.top) && (irect.bottom <= disprect.bottom)) { 995 disprect.top = irect.bottom; 996 srcrect.top += irect_h; 997 } 998 else if((disprect.bottom == irect.bottom) 999 && (irect.top >= disprect.top)) { 1000 disprect.bottom = irect.top; 1001 srcrect.bottom -= irect_h; 1002 } 1003 } 1004 else if((disprect.top == irect.top) && (disprect.bottom == irect.bottom)) { 1005 if((disprect.left == irect.left) && (irect.right <= disprect.right)) { 1006 disprect.left = irect.right; 1007 srcrect.left += irect_w; 1008 } 1009 else if((disprect.right == irect.right) 1010 && (irect.left >= disprect.left)) { 1011 disprect.right = irect.left; 1012 srcrect.right -= irect_w; 1013 } 1014 } 1015} 1016 1017void optimizeLayerRects(hwc_context_t *ctx, 1018 const hwc_display_contents_1_t *list, const int& dpy) { 1019 int i=list->numHwLayers-2; 1020 hwc_rect_t irect; 1021 while(i > 0) { 1022 1023 //see if there is no blending required. 1024 //If it is opaque see if we can substract this region from below layers. 1025 if(list->hwLayers[i].blending == HWC_BLENDING_NONE) { 1026 int j= i-1; 1027 hwc_rect_t& topframe = 1028 (hwc_rect_t&)list->hwLayers[i].displayFrame; 1029 while(j >= 0) { 1030 if(!needsScaling(ctx, &list->hwLayers[j], dpy)) { 1031 hwc_rect_t& bottomframe = 1032 (hwc_rect_t&)list->hwLayers[j].displayFrame; 1033 1034 hwc_rect_t irect = getIntersection(bottomframe, topframe); 1035 if(isValidRect(irect)) { 1036 //if intersection is valid rect, deduct it 1037 deductRect(&list->hwLayers[j], irect); 1038 } 1039 } 1040 j--; 1041 } 1042 } 1043 i--; 1044 } 1045} 1046 1047void getNonWormholeRegion(hwc_display_contents_1_t* list, 1048 hwc_rect_t& nwr) 1049{ 1050 uint32_t last = list->numHwLayers - 1; 1051 hwc_rect_t fbDisplayFrame = list->hwLayers[last].displayFrame; 1052 //Initiliaze nwr to first frame 1053 nwr.left = list->hwLayers[0].displayFrame.left; 1054 nwr.top = list->hwLayers[0].displayFrame.top; 1055 nwr.right = list->hwLayers[0].displayFrame.right; 1056 nwr.bottom = list->hwLayers[0].displayFrame.bottom; 1057 1058 for (uint32_t i = 1; i < last; i++) { 1059 hwc_rect_t displayFrame = list->hwLayers[i].displayFrame; 1060 nwr = getUnion(nwr, displayFrame); 1061 } 1062 1063 //Intersect with the framebuffer 1064 nwr = getIntersection(nwr, fbDisplayFrame); 1065} 1066 1067bool isExternalActive(hwc_context_t* ctx) { 1068 return ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].isActive; 1069} 1070 1071void closeAcquireFds(hwc_display_contents_1_t* list) { 1072 for(uint32_t i = 0; list && i < list->numHwLayers; i++) { 1073 //Close the acquireFenceFds 1074 //HWC_FRAMEBUFFER are -1 already by SF, rest we close. 1075 if(list->hwLayers[i].acquireFenceFd >= 0) { 1076 close(list->hwLayers[i].acquireFenceFd); 1077 list->hwLayers[i].acquireFenceFd = -1; 1078 } 1079 } 1080} 1081 1082int hwc_sync(hwc_context_t *ctx, hwc_display_contents_1_t* list, int dpy, 1083 int fd) { 1084 ATRACE_CALL(); 1085 int ret = 0; 1086 int acquireFd[MAX_NUM_APP_LAYERS]; 1087 int count = 0; 1088 int releaseFd = -1; 1089 int fbFd = -1; 1090 bool swapzero = false; 1091 int mdpVersion = qdutils::MDPVersion::getInstance().getMDPVersion(); 1092 1093 struct mdp_buf_sync data; 1094 memset(&data, 0, sizeof(data)); 1095 data.acq_fen_fd = acquireFd; 1096 data.rel_fen_fd = &releaseFd; 1097 1098 char property[PROPERTY_VALUE_MAX]; 1099 if(property_get("debug.egl.swapinterval", property, "1") > 0) { 1100 if(atoi(property) == 0) 1101 swapzero = true; 1102 } 1103 1104 bool isExtAnimating = false; 1105 if(dpy) 1106 isExtAnimating = ctx->listStats[dpy].isDisplayAnimating; 1107 1108 //Send acquireFenceFds to rotator 1109 for(uint32_t i = 0; i < ctx->mLayerRotMap[dpy]->getCount(); i++) { 1110 int rotFd = ctx->mRotMgr->getRotDevFd(); 1111 int rotReleaseFd = -1; 1112 struct mdp_buf_sync rotData; 1113 memset(&rotData, 0, sizeof(rotData)); 1114 rotData.acq_fen_fd = 1115 &ctx->mLayerRotMap[dpy]->getLayer(i)->acquireFenceFd; 1116 rotData.rel_fen_fd = &rotReleaseFd; //driver to populate this 1117 rotData.session_id = ctx->mLayerRotMap[dpy]->getRot(i)->getSessId(); 1118 int ret = 0; 1119 ret = ioctl(rotFd, MSMFB_BUFFER_SYNC, &rotData); 1120 if(ret < 0) { 1121 ALOGE("%s: ioctl MSMFB_BUFFER_SYNC failed for rot sync, err=%s", 1122 __FUNCTION__, strerror(errno)); 1123 } else { 1124 close(ctx->mLayerRotMap[dpy]->getLayer(i)->acquireFenceFd); 1125 //For MDP to wait on. 1126 ctx->mLayerRotMap[dpy]->getLayer(i)->acquireFenceFd = 1127 dup(rotReleaseFd); 1128 //A buffer is free to be used by producer as soon as its copied to 1129 //rotator 1130 ctx->mLayerRotMap[dpy]->getLayer(i)->releaseFenceFd = 1131 rotReleaseFd; 1132 } 1133 } 1134 1135 //Accumulate acquireFenceFds for MDP 1136 for(uint32_t i = 0; i < list->numHwLayers; i++) { 1137 if(list->hwLayers[i].compositionType == HWC_OVERLAY && 1138 list->hwLayers[i].acquireFenceFd >= 0) { 1139 if(UNLIKELY(swapzero)) 1140 acquireFd[count++] = -1; 1141 else 1142 acquireFd[count++] = list->hwLayers[i].acquireFenceFd; 1143 } 1144 if(list->hwLayers[i].compositionType == HWC_FRAMEBUFFER_TARGET) { 1145 if(UNLIKELY(swapzero)) 1146 acquireFd[count++] = -1; 1147 else if(fd >= 0) { 1148 //set the acquireFD from fd - which is coming from c2d 1149 acquireFd[count++] = fd; 1150 // Buffer sync IOCTL should be async when using c2d fence is 1151 // used 1152 data.flags &= ~MDP_BUF_SYNC_FLAG_WAIT; 1153 } else if(list->hwLayers[i].acquireFenceFd >= 0) 1154 acquireFd[count++] = list->hwLayers[i].acquireFenceFd; 1155 } 1156 } 1157 1158 data.acq_fen_fd_cnt = count; 1159 fbFd = ctx->dpyAttr[dpy].fd; 1160 1161 //Waits for acquire fences, returns a release fence 1162 if(LIKELY(!swapzero)) { 1163 uint64_t start = systemTime(); 1164 ret = ioctl(fbFd, MSMFB_BUFFER_SYNC, &data); 1165 ALOGD_IF(HWC_UTILS_DEBUG, "%s: time taken for MSMFB_BUFFER_SYNC IOCTL = %d", 1166 __FUNCTION__, (size_t) ns2ms(systemTime() - start)); 1167 } 1168 1169 if(ret < 0) { 1170 ALOGE("%s: ioctl MSMFB_BUFFER_SYNC failed, err=%s", 1171 __FUNCTION__, strerror(errno)); 1172 ALOGE("%s: acq_fen_fd_cnt=%d flags=%d fd=%d dpy=%d numHwLayers=%d", 1173 __FUNCTION__, data.acq_fen_fd_cnt, data.flags, fbFd, 1174 dpy, list->numHwLayers); 1175 } 1176 1177 for(uint32_t i = 0; i < list->numHwLayers; i++) { 1178 if(list->hwLayers[i].compositionType == HWC_OVERLAY || 1179 list->hwLayers[i].compositionType == HWC_FRAMEBUFFER_TARGET) { 1180 //Populate releaseFenceFds. 1181 if(UNLIKELY(swapzero)) { 1182 list->hwLayers[i].releaseFenceFd = -1; 1183 } else if(isExtAnimating) { 1184 // Release all the app layer fds immediately, 1185 // if animation is in progress. 1186 hwc_layer_1_t const* layer = &list->hwLayers[i]; 1187 private_handle_t *hnd = (private_handle_t *)layer->handle; 1188 if(isYuvBuffer(hnd)) { 1189 list->hwLayers[i].releaseFenceFd = dup(releaseFd); 1190 } else 1191 list->hwLayers[i].releaseFenceFd = -1; 1192 } else if(list->hwLayers[i].releaseFenceFd < 0) { 1193 //If rotator has not already populated this field. 1194 list->hwLayers[i].releaseFenceFd = dup(releaseFd); 1195 } 1196 } 1197 } 1198 1199 if(fd >= 0) { 1200 close(fd); 1201 fd = -1; 1202 } 1203 1204 if (ctx->mCopyBit[dpy]) 1205 ctx->mCopyBit[dpy]->setReleaseFd(releaseFd); 1206 1207 //Signals when MDP finishes reading rotator buffers. 1208 ctx->mLayerRotMap[dpy]->setReleaseFd(releaseFd); 1209 1210 // if external is animating, close the relaseFd 1211 if(isExtAnimating) { 1212 close(releaseFd); 1213 releaseFd = -1; 1214 } 1215 1216 if(UNLIKELY(swapzero)){ 1217 list->retireFenceFd = -1; 1218 close(releaseFd); 1219 } else { 1220 list->retireFenceFd = releaseFd; 1221 } 1222 1223 return ret; 1224} 1225 1226void trimLayer(hwc_context_t *ctx, const int& dpy, const int& transform, 1227 hwc_rect_t& crop, hwc_rect_t& dst) { 1228 int hw_w = ctx->dpyAttr[dpy].xres; 1229 int hw_h = ctx->dpyAttr[dpy].yres; 1230 if(dst.left < 0 || dst.top < 0 || 1231 dst.right > hw_w || dst.bottom > hw_h) { 1232 hwc_rect_t scissor = {0, 0, hw_w, hw_h }; 1233 qhwc::calculate_crop_rects(crop, dst, scissor, transform); 1234 } 1235} 1236 1237void setMdpFlags(hwc_layer_1_t *layer, 1238 ovutils::eMdpFlags &mdpFlags, 1239 int rotDownscale, int transform) { 1240 private_handle_t *hnd = (private_handle_t *)layer->handle; 1241 MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; 1242 1243 if(layer->blending == HWC_BLENDING_PREMULT) { 1244 ovutils::setMdpFlags(mdpFlags, 1245 ovutils::OV_MDP_BLEND_FG_PREMULT); 1246 } 1247 1248 if(isYuvBuffer(hnd)) { 1249 if(isSecureBuffer(hnd)) { 1250 ovutils::setMdpFlags(mdpFlags, 1251 ovutils::OV_MDP_SECURE_OVERLAY_SESSION); 1252 } 1253 if(metadata && (metadata->operation & PP_PARAM_INTERLACED) && 1254 metadata->interlaced) { 1255 ovutils::setMdpFlags(mdpFlags, 1256 ovutils::OV_MDP_DEINTERLACE); 1257 } 1258 //Pre-rotation will be used using rotator. 1259 if(transform & HWC_TRANSFORM_ROT_90) { 1260 ovutils::setMdpFlags(mdpFlags, 1261 ovutils::OV_MDP_SOURCE_ROTATED_90); 1262 } 1263 } 1264 1265 if(isSecureDisplayBuffer(hnd)) { 1266 // Secure display needs both SECURE_OVERLAY and SECURE_DISPLAY_OV 1267 ovutils::setMdpFlags(mdpFlags, 1268 ovutils::OV_MDP_SECURE_OVERLAY_SESSION); 1269 ovutils::setMdpFlags(mdpFlags, 1270 ovutils::OV_MDP_SECURE_DISPLAY_OVERLAY_SESSION); 1271 } 1272 //No 90 component and no rot-downscale then flips done by MDP 1273 //If we use rot then it might as well do flips 1274 if(!(transform & HWC_TRANSFORM_ROT_90) && !rotDownscale) { 1275 if(transform & HWC_TRANSFORM_FLIP_H) { 1276 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_FLIP_H); 1277 } 1278 1279 if(transform & HWC_TRANSFORM_FLIP_V) { 1280 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_FLIP_V); 1281 } 1282 } 1283 1284 if(metadata && 1285 ((metadata->operation & PP_PARAM_HSIC) 1286 || (metadata->operation & PP_PARAM_IGC) 1287 || (metadata->operation & PP_PARAM_SHARP2))) { 1288 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_PP_EN); 1289 } 1290} 1291 1292int configRotator(Rotator *rot, Whf& whf, 1293 hwc_rect_t& crop, const eMdpFlags& mdpFlags, 1294 const eTransform& orient, const int& downscale) { 1295 1296 // Fix alignments for TILED format 1297 if(whf.format == MDP_Y_CRCB_H2V2_TILE || 1298 whf.format == MDP_Y_CBCR_H2V2_TILE) { 1299 whf.w = utils::alignup(whf.w, 64); 1300 whf.h = utils::alignup(whf.h, 32); 1301 } 1302 rot->setSource(whf); 1303 1304 if (qdutils::MDPVersion::getInstance().getMDPVersion() >= 1305 qdutils::MDSS_V5) { 1306 uint32_t crop_w = (crop.right - crop.left); 1307 uint32_t crop_h = (crop.bottom - crop.top); 1308 if (ovutils::isYuv(whf.format)) { 1309 ovutils::normalizeCrop((uint32_t&)crop.left, crop_w); 1310 ovutils::normalizeCrop((uint32_t&)crop.top, crop_h); 1311 // For interlaced, crop.h should be 4-aligned 1312 if ((mdpFlags & ovutils::OV_MDP_DEINTERLACE) && (crop_h % 4)) 1313 crop_h = ovutils::aligndown(crop_h, 4); 1314 crop.right = crop.left + crop_w; 1315 crop.bottom = crop.top + crop_h; 1316 } 1317 Dim rotCrop(crop.left, crop.top, crop_w, crop_h); 1318 rot->setCrop(rotCrop); 1319 } 1320 1321 rot->setFlags(mdpFlags); 1322 rot->setTransform(orient); 1323 rot->setDownscale(downscale); 1324 if(!rot->commit()) return -1; 1325 return 0; 1326} 1327 1328int configMdp(Overlay *ov, const PipeArgs& parg, 1329 const eTransform& orient, const hwc_rect_t& crop, 1330 const hwc_rect_t& pos, const MetaData_t *metadata, 1331 const eDest& dest) { 1332 ov->setSource(parg, dest); 1333 ov->setTransform(orient, dest); 1334 1335 int crop_w = crop.right - crop.left; 1336 int crop_h = crop.bottom - crop.top; 1337 Dim dcrop(crop.left, crop.top, crop_w, crop_h); 1338 ov->setCrop(dcrop, dest); 1339 1340 int posW = pos.right - pos.left; 1341 int posH = pos.bottom - pos.top; 1342 Dim position(pos.left, pos.top, posW, posH); 1343 ov->setPosition(position, dest); 1344 1345 if (metadata) 1346 ov->setVisualParams(*metadata, dest); 1347 1348 if (!ov->commit(dest)) { 1349 return -1; 1350 } 1351 return 0; 1352} 1353 1354void updateSource(eTransform& orient, Whf& whf, 1355 hwc_rect_t& crop) { 1356 Dim srcCrop(crop.left, crop.top, 1357 crop.right - crop.left, 1358 crop.bottom - crop.top); 1359 orient = static_cast<eTransform>(ovutils::getMdpOrient(orient)); 1360 preRotateSource(orient, whf, srcCrop); 1361 if (qdutils::MDPVersion::getInstance().getMDPVersion() >= 1362 qdutils::MDSS_V5) { 1363 // Source for overlay will be the cropped (and rotated) 1364 crop.left = 0; 1365 crop.top = 0; 1366 crop.right = srcCrop.w; 1367 crop.bottom = srcCrop.h; 1368 // Set width & height equal to sourceCrop w & h 1369 whf.w = srcCrop.w; 1370 whf.h = srcCrop.h; 1371 } else { 1372 crop.left = srcCrop.x; 1373 crop.top = srcCrop.y; 1374 crop.right = srcCrop.x + srcCrop.w; 1375 crop.bottom = srcCrop.y + srcCrop.h; 1376 } 1377} 1378 1379int configureNonSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, 1380 const int& dpy, eMdpFlags& mdpFlags, eZorder& z, 1381 eIsFg& isFg, const eDest& dest, Rotator **rot) { 1382 1383 private_handle_t *hnd = (private_handle_t *)layer->handle; 1384 if(!hnd) { 1385 ALOGE("%s: layer handle is NULL", __FUNCTION__); 1386 return -1; 1387 } 1388 1389 MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; 1390 1391 hwc_rect_t crop = layer->sourceCrop; 1392 hwc_rect_t dst = layer->displayFrame; 1393 int transform = layer->transform; 1394 eTransform orient = static_cast<eTransform>(transform); 1395 int downscale = 0; 1396 int rotFlags = ovutils::ROT_FLAGS_NONE; 1397 Whf whf(hnd->width, hnd->height, 1398 getMdpFormat(hnd->format), hnd->size); 1399 1400 // Handle R/B swap 1401 if (layer->flags & HWC_FORMAT_RB_SWAP) { 1402 if (hnd->format == HAL_PIXEL_FORMAT_RGBA_8888) 1403 whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRA_8888); 1404 else if (hnd->format == HAL_PIXEL_FORMAT_RGBX_8888) 1405 whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRX_8888); 1406 } 1407 1408 if(dpy && isYuvBuffer(hnd)) { 1409 if(!ctx->listStats[dpy].isDisplayAnimating) { 1410 ctx->mPrevCropVideo = crop; 1411 ctx->mPrevDestVideo = dst; 1412 ctx->mPrevTransformVideo = transform; 1413 } else { 1414 // Restore the previous crop, dest rect and transform values, during 1415 // animation to avoid displaying videos at random coordinates. 1416 crop = ctx->mPrevCropVideo; 1417 dst = ctx->mPrevDestVideo; 1418 transform = ctx->mPrevTransformVideo; 1419 orient = static_cast<eTransform>(transform); 1420 //In you tube use case when a device rotated from landscape to 1421 // portrait, set the isFg flag and zOrder to avoid displaying UI on 1422 // hdmi during animation 1423 if(ctx->deviceOrientation) { 1424 isFg = ovutils::IS_FG_SET; 1425 z = ZORDER_1; 1426 } 1427 } 1428 calcExtDisplayPosition(ctx, hnd, dpy, crop, dst, 1429 transform, orient); 1430 } 1431 1432 if(isYuvBuffer(hnd) && ctx->mMDP.version >= qdutils::MDP_V4_2 && 1433 ctx->mMDP.version < qdutils::MDSS_V5) { 1434 downscale = getDownscaleFactor( 1435 crop.right - crop.left, 1436 crop.bottom - crop.top, 1437 dst.right - dst.left, 1438 dst.bottom - dst.top); 1439 if(downscale) { 1440 rotFlags = ROT_DOWNSCALE_ENABLED; 1441 } 1442 } 1443 1444 setMdpFlags(layer, mdpFlags, downscale, transform); 1445 trimLayer(ctx, dpy, transform, crop, dst); 1446 1447 if(isYuvBuffer(hnd) && //if 90 component or downscale, use rot 1448 ((transform & HWC_TRANSFORM_ROT_90) || downscale)) { 1449 *rot = ctx->mRotMgr->getNext(); 1450 if(*rot == NULL) return -1; 1451 BwcPM::setBwc(ctx, crop, dst, transform, mdpFlags); 1452 //Configure rotator for pre-rotation 1453 if(configRotator(*rot, whf, crop, mdpFlags, orient, downscale) < 0) { 1454 ALOGE("%s: configRotator failed!", __FUNCTION__); 1455 ctx->mOverlay->clear(dpy); 1456 return -1; 1457 } 1458 ctx->mLayerRotMap[dpy]->add(layer, *rot); 1459 whf.format = (*rot)->getDstFormat(); 1460 updateSource(orient, whf, crop); 1461 rotFlags |= ovutils::ROT_PREROTATED; 1462 } 1463 1464 //For the mdp, since either we are pre-rotating or MDP does flips 1465 orient = OVERLAY_TRANSFORM_0; 1466 transform = 0; 1467 PipeArgs parg(mdpFlags, whf, z, isFg, 1468 static_cast<eRotFlags>(rotFlags), layer->planeAlpha, 1469 (ovutils::eBlending) getBlending(layer->blending)); 1470 1471 if(configMdp(ctx->mOverlay, parg, orient, crop, dst, metadata, dest) < 0) { 1472 ALOGE("%s: commit failed for low res panel", __FUNCTION__); 1473 return -1; 1474 } 1475 return 0; 1476} 1477 1478//Helper to 1) Ensure crops dont have gaps 2) Ensure L and W are even 1479void sanitizeSourceCrop(hwc_rect_t& cropL, hwc_rect_t& cropR, 1480 private_handle_t *hnd) { 1481 if(cropL.right - cropL.left) { 1482 if(isYuvBuffer(hnd)) { 1483 //Always safe to even down left 1484 ovutils::even_floor(cropL.left); 1485 //If right is even, automatically width is even, since left is 1486 //already even 1487 ovutils::even_floor(cropL.right); 1488 } 1489 //Make sure there are no gaps between left and right splits if the layer 1490 //is spread across BOTH halves 1491 if(cropR.right - cropR.left) { 1492 cropR.left = cropL.right; 1493 } 1494 } 1495 1496 if(cropR.right - cropR.left) { 1497 if(isYuvBuffer(hnd)) { 1498 //Always safe to even down left 1499 ovutils::even_floor(cropR.left); 1500 //If right is even, automatically width is even, since left is 1501 //already even 1502 ovutils::even_floor(cropR.right); 1503 } 1504 } 1505} 1506 1507int configureSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, 1508 const int& dpy, eMdpFlags& mdpFlagsL, eZorder& z, 1509 eIsFg& isFg, const eDest& lDest, const eDest& rDest, 1510 Rotator **rot) { 1511 private_handle_t *hnd = (private_handle_t *)layer->handle; 1512 if(!hnd) { 1513 ALOGE("%s: layer handle is NULL", __FUNCTION__); 1514 return -1; 1515 } 1516 1517 MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; 1518 1519 int hw_w = ctx->dpyAttr[dpy].xres; 1520 int hw_h = ctx->dpyAttr[dpy].yres; 1521 hwc_rect_t crop = layer->sourceCrop; 1522 hwc_rect_t dst = layer->displayFrame; 1523 int transform = layer->transform; 1524 eTransform orient = static_cast<eTransform>(transform); 1525 const int downscale = 0; 1526 int rotFlags = ROT_FLAGS_NONE; 1527 1528 Whf whf(hnd->width, hnd->height, 1529 getMdpFormat(hnd->format), hnd->size); 1530 1531 // Handle R/B swap 1532 if (layer->flags & HWC_FORMAT_RB_SWAP) { 1533 if (hnd->format == HAL_PIXEL_FORMAT_RGBA_8888) 1534 whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRA_8888); 1535 else if (hnd->format == HAL_PIXEL_FORMAT_RGBX_8888) 1536 whf.format = getMdpFormat(HAL_PIXEL_FORMAT_BGRX_8888); 1537 } 1538 1539 if(dpy && isYuvBuffer(hnd)) { 1540 if(!ctx->listStats[dpy].isDisplayAnimating) { 1541 ctx->mPrevCropVideo = crop; 1542 ctx->mPrevDestVideo = dst; 1543 ctx->mPrevTransformVideo = transform; 1544 } else { 1545 // Restore the previous crop, dest rect and transform values, during 1546 // animation to avoid displaying videos at random coordinates. 1547 crop = ctx->mPrevCropVideo; 1548 dst = ctx->mPrevDestVideo; 1549 transform = ctx->mPrevTransformVideo; 1550 orient = static_cast<eTransform>(transform); 1551 //In you tube use case when a device rotated from landscape to 1552 // portrait, set the isFg flag and zOrder to avoid displaying UI on 1553 // hdmi during animation 1554 if(ctx->deviceOrientation) { 1555 isFg = ovutils::IS_FG_SET; 1556 z = ZORDER_1; 1557 } 1558 } 1559 } 1560 1561 1562 setMdpFlags(layer, mdpFlagsL, 0, transform); 1563 1564 if(lDest != OV_INVALID && rDest != OV_INVALID) { 1565 //Enable overfetch 1566 setMdpFlags(mdpFlagsL, OV_MDSS_MDP_DUAL_PIPE); 1567 } 1568 1569 trimLayer(ctx, dpy, transform, crop, dst); 1570 1571 //Will do something only if feature enabled and conditions suitable 1572 //hollow call otherwise 1573 if(ctx->mAD->prepare(ctx, crop, whf, hnd)) { 1574 overlay::Writeback *wb = overlay::Writeback::getInstance(); 1575 whf.format = wb->getOutputFormat(); 1576 } 1577 1578 if(isYuvBuffer(hnd) && (transform & HWC_TRANSFORM_ROT_90)) { 1579 (*rot) = ctx->mRotMgr->getNext(); 1580 if((*rot) == NULL) return -1; 1581 //Configure rotator for pre-rotation 1582 if(configRotator(*rot, whf, crop, mdpFlagsL, orient, downscale) < 0) { 1583 ALOGE("%s: configRotator failed!", __FUNCTION__); 1584 ctx->mOverlay->clear(dpy); 1585 return -1; 1586 } 1587 ctx->mLayerRotMap[dpy]->add(layer, *rot); 1588 whf.format = (*rot)->getDstFormat(); 1589 updateSource(orient, whf, crop); 1590 rotFlags |= ROT_PREROTATED; 1591 } 1592 1593 eMdpFlags mdpFlagsR = mdpFlagsL; 1594 setMdpFlags(mdpFlagsR, OV_MDSS_MDP_RIGHT_MIXER); 1595 1596 hwc_rect_t tmp_cropL = {0}, tmp_dstL = {0}; 1597 hwc_rect_t tmp_cropR = {0}, tmp_dstR = {0}; 1598 1599 const int lSplit = getLeftSplit(ctx, dpy); 1600 1601 if(lDest != OV_INVALID) { 1602 tmp_cropL = crop; 1603 tmp_dstL = dst; 1604 hwc_rect_t scissor = {0, 0, lSplit, hw_h }; 1605 qhwc::calculate_crop_rects(tmp_cropL, tmp_dstL, scissor, 0); 1606 } 1607 if(rDest != OV_INVALID) { 1608 tmp_cropR = crop; 1609 tmp_dstR = dst; 1610 hwc_rect_t scissor = {lSplit, 0, hw_w, hw_h }; 1611 qhwc::calculate_crop_rects(tmp_cropR, tmp_dstR, scissor, 0); 1612 } 1613 1614 sanitizeSourceCrop(tmp_cropL, tmp_cropR, hnd); 1615 1616 //When buffer is H-flipped, contents of mixer config also needs to swapped 1617 //Not needed if the layer is confined to one half of the screen. 1618 //If rotator has been used then it has also done the flips, so ignore them. 1619 if((orient & OVERLAY_TRANSFORM_FLIP_H) && lDest != OV_INVALID 1620 && rDest != OV_INVALID && (*rot) == NULL) { 1621 hwc_rect_t new_cropR; 1622 new_cropR.left = tmp_cropL.left; 1623 new_cropR.right = new_cropR.left + (tmp_cropR.right - tmp_cropR.left); 1624 1625 hwc_rect_t new_cropL; 1626 new_cropL.left = new_cropR.right; 1627 new_cropL.right = tmp_cropR.right; 1628 1629 tmp_cropL.left = new_cropL.left; 1630 tmp_cropL.right = new_cropL.right; 1631 1632 tmp_cropR.left = new_cropR.left; 1633 tmp_cropR.right = new_cropR.right; 1634 1635 } 1636 1637 //For the mdp, since either we are pre-rotating or MDP does flips 1638 orient = OVERLAY_TRANSFORM_0; 1639 transform = 0; 1640 1641 //configure left mixer 1642 if(lDest != OV_INVALID) { 1643 PipeArgs pargL(mdpFlagsL, whf, z, isFg, 1644 static_cast<eRotFlags>(rotFlags), layer->planeAlpha, 1645 (ovutils::eBlending) getBlending(layer->blending)); 1646 1647 if(configMdp(ctx->mOverlay, pargL, orient, 1648 tmp_cropL, tmp_dstL, metadata, lDest) < 0) { 1649 ALOGE("%s: commit failed for left mixer config", __FUNCTION__); 1650 return -1; 1651 } 1652 } 1653 1654 //configure right mixer 1655 if(rDest != OV_INVALID) { 1656 PipeArgs pargR(mdpFlagsR, whf, z, isFg, 1657 static_cast<eRotFlags>(rotFlags), 1658 layer->planeAlpha, 1659 (ovutils::eBlending) getBlending(layer->blending)); 1660 tmp_dstR.right = tmp_dstR.right - lSplit; 1661 tmp_dstR.left = tmp_dstR.left - lSplit; 1662 if(configMdp(ctx->mOverlay, pargR, orient, 1663 tmp_cropR, tmp_dstR, metadata, rDest) < 0) { 1664 ALOGE("%s: commit failed for right mixer config", __FUNCTION__); 1665 return -1; 1666 } 1667 } 1668 1669 return 0; 1670} 1671 1672bool canUseRotator(hwc_context_t *ctx, int dpy) { 1673 if(qdutils::MDPVersion::getInstance().is8x26() && 1674 ctx->mVirtualDisplay->isConnected() && 1675 !ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].isPause) { 1676 // Allow if YUV needs rotation and DMA is configured to BLOCK mode for 1677 // primary. For portrait videos usecase on WFD, Driver supports 1678 // multiplexing of DMA pipe in LINE and BLOCK mode. 1679 if(dpy == HWC_DISPLAY_PRIMARY) 1680 return false; 1681 } 1682 if(ctx->mMDP.version == qdutils::MDP_V3_0_4) 1683 return false; 1684 return true; 1685} 1686 1687int getLeftSplit(hwc_context_t *ctx, const int& dpy) { 1688 //Default even split for all displays with high res 1689 int lSplit = ctx->dpyAttr[dpy].xres / 2; 1690 if(dpy == HWC_DISPLAY_PRIMARY && 1691 qdutils::MDPVersion::getInstance().getLeftSplit()) { 1692 //Override if split published by driver for primary 1693 lSplit = qdutils::MDPVersion::getInstance().getLeftSplit(); 1694 } 1695 return lSplit; 1696} 1697 1698bool isDisplaySplit(hwc_context_t* ctx, int dpy) { 1699 if(ctx->dpyAttr[dpy].xres > qdutils::MAX_DISPLAY_DIM) { 1700 return true; 1701 } 1702 //For testing we could split primary via device tree values 1703 if(dpy == HWC_DISPLAY_PRIMARY && 1704 qdutils::MDPVersion::getInstance().getRightSplit()) { 1705 return true; 1706 } 1707 return false; 1708} 1709 1710void BwcPM::setBwc(hwc_context_t *ctx, const hwc_rect_t& crop, 1711 const hwc_rect_t& dst, const int& transform, 1712 ovutils::eMdpFlags& mdpFlags) { 1713 //Target doesnt support Bwc 1714 if(!qdutils::MDPVersion::getInstance().supportsBWC()) { 1715 return; 1716 } 1717 //src width > MAX mixer supported dim 1718 if((crop.right - crop.left) > qdutils::MAX_DISPLAY_DIM) { 1719 return; 1720 } 1721 //External connected 1722 if(ctx->mExtDisplay->isConnected()|| ctx->mVirtualDisplay->isConnected()) { 1723 return; 1724 } 1725 //Decimation necessary, cannot use BWC. H/W requirement. 1726 if(qdutils::MDPVersion::getInstance().supportsDecimation()) { 1727 int src_w = crop.right - crop.left; 1728 int src_h = crop.bottom - crop.top; 1729 int dst_w = dst.right - dst.left; 1730 int dst_h = dst.bottom - dst.top; 1731 if(transform & HAL_TRANSFORM_ROT_90) { 1732 swap(src_w, src_h); 1733 } 1734 float horDscale = 0.0f; 1735 float verDscale = 0.0f; 1736 int horzDeci = 0; 1737 int vertDeci = 0; 1738 ovutils::getDecimationFactor(src_w, src_h, dst_w, dst_h, horDscale, 1739 verDscale); 1740 //TODO Use log2f once math.h has it 1741 if((int)horDscale) 1742 horzDeci = (int)(log(horDscale) / log(2)); 1743 if((int)verDscale) 1744 vertDeci = (int)(log(verDscale) / log(2)); 1745 if(horzDeci || vertDeci) return; 1746 } 1747 //Property 1748 char value[PROPERTY_VALUE_MAX]; 1749 property_get("debug.disable.bwc", value, "0"); 1750 if(atoi(value)) return; 1751 1752 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDSS_MDP_BWC_EN); 1753} 1754 1755void LayerRotMap::add(hwc_layer_1_t* layer, Rotator *rot) { 1756 if(mCount >= MAX_SESS) return; 1757 mLayer[mCount] = layer; 1758 mRot[mCount] = rot; 1759 mCount++; 1760} 1761 1762void LayerRotMap::reset() { 1763 for (int i = 0; i < MAX_SESS; i++) { 1764 mLayer[i] = 0; 1765 mRot[i] = 0; 1766 } 1767 mCount = 0; 1768} 1769 1770void LayerRotMap::setReleaseFd(const int& fence) { 1771 for(uint32_t i = 0; i < mCount; i++) { 1772 mRot[i]->setReleaseFd(dup(fence)); 1773 } 1774} 1775 1776};//namespace qhwc 1777