hwc_utils.cpp revision bc037e0bbb3d1778fb4bde55582fd1d4e666f957
1/* 2 * Copyright (C) 2010 The Android Open Source Project 3 * Copyright (C) 2012-2013, The Linux Foundation All rights reserved. 4 * 5 * Not a Contribution, Apache license notifications and license are retained 6 * for attribution purposes only. 7 * 8 * Licensed under the Apache License, Version 2.0 (the "License"); 9 * you may not use this file except in compliance with the License. 10 * You may obtain a copy of the License at 11 * 12 * http://www.apache.org/licenses/LICENSE-2.0 13 * 14 * Unless required by applicable law or agreed to in writing, software 15 * distributed under the License is distributed on an "AS IS" BASIS, 16 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 17 * See the License for the specific language governing permissions and 18 * limitations under the License. 19 */ 20#define ATRACE_TAG (ATRACE_TAG_GRAPHICS | ATRACE_TAG_HAL) 21#define HWC_UTILS_DEBUG 0 22#include <math.h> 23#include <sys/ioctl.h> 24#include <linux/fb.h> 25#include <binder/IServiceManager.h> 26#include <EGL/egl.h> 27#include <cutils/properties.h> 28#include <utils/Trace.h> 29#include <gralloc_priv.h> 30#include <overlay.h> 31#include <overlayRotator.h> 32#include <overlayWriteback.h> 33#include "hwc_utils.h" 34#include "hwc_mdpcomp.h" 35#include "hwc_fbupdate.h" 36#include "hwc_ad.h" 37#include "mdp_version.h" 38#include "hwc_copybit.h" 39#include "hwc_dump_layers.h" 40#include "hwc_vpuclient.h" 41#include "external.h" 42#include "virtual.h" 43#include "hwc_qclient.h" 44#include "QService.h" 45#include "comptype.h" 46 47using namespace qClient; 48using namespace qService; 49using namespace android; 50using namespace overlay; 51using namespace overlay::utils; 52namespace ovutils = overlay::utils; 53 54namespace qhwc { 55 56static int openFramebufferDevice(hwc_context_t *ctx) 57{ 58 struct fb_fix_screeninfo finfo; 59 struct fb_var_screeninfo info; 60 61 int fb_fd = openFb(HWC_DISPLAY_PRIMARY); 62 if(fb_fd < 0) { 63 ALOGE("%s: Error Opening FB : %s", __FUNCTION__, strerror(errno)); 64 return -errno; 65 } 66 67 if (ioctl(fb_fd, FBIOGET_VSCREENINFO, &info) == -1) { 68 ALOGE("%s:Error in ioctl FBIOGET_VSCREENINFO: %s", __FUNCTION__, 69 strerror(errno)); 70 close(fb_fd); 71 return -errno; 72 } 73 74 if (int(info.width) <= 0 || int(info.height) <= 0) { 75 // the driver doesn't return that information 76 // default to 160 dpi 77 info.width = ((info.xres * 25.4f)/160.0f + 0.5f); 78 info.height = ((info.yres * 25.4f)/160.0f + 0.5f); 79 } 80 81 float xdpi = (info.xres * 25.4f) / info.width; 82 float ydpi = (info.yres * 25.4f) / info.height; 83 84#ifdef MSMFB_METADATA_GET 85 struct msmfb_metadata metadata; 86 memset(&metadata, 0 , sizeof(metadata)); 87 metadata.op = metadata_op_frame_rate; 88 89 if (ioctl(fb_fd, MSMFB_METADATA_GET, &metadata) == -1) { 90 ALOGE("%s:Error retrieving panel frame rate: %s", __FUNCTION__, 91 strerror(errno)); 92 close(fb_fd); 93 return -errno; 94 } 95 96 float fps = metadata.data.panel_frame_rate; 97#else 98 //XXX: Remove reserved field usage on all baselines 99 //The reserved[3] field is used to store FPS by the driver. 100 float fps = info.reserved[3] & 0xFF; 101#endif 102 103 if (ioctl(fb_fd, FBIOGET_FSCREENINFO, &finfo) == -1) { 104 ALOGE("%s:Error in ioctl FBIOGET_FSCREENINFO: %s", __FUNCTION__, 105 strerror(errno)); 106 close(fb_fd); 107 return -errno; 108 } 109 110 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd = fb_fd; 111 //xres, yres may not be 32 aligned 112 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].stride = finfo.line_length /(info.xres/8); 113 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres = info.xres; 114 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres = info.yres; 115 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xdpi = xdpi; 116 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].ydpi = ydpi; 117 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].vsync_period = 1000000000l / fps; 118 119 //Unblank primary on first boot 120 if(ioctl(fb_fd, FBIOBLANK,FB_BLANK_UNBLANK) < 0) { 121 ALOGE("%s: Failed to unblank display", __FUNCTION__); 122 return -errno; 123 } 124 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].isActive = true; 125 126 return 0; 127} 128 129void initContext(hwc_context_t *ctx) 130{ 131 openFramebufferDevice(ctx); 132 ctx->mMDP.version = qdutils::MDPVersion::getInstance().getMDPVersion(); 133 ctx->mMDP.hasOverlay = qdutils::MDPVersion::getInstance().hasOverlay(); 134 ctx->mMDP.panel = qdutils::MDPVersion::getInstance().getPanelType(); 135 overlay::Overlay::initOverlay(); 136 ctx->mOverlay = overlay::Overlay::getInstance(); 137 ctx->mRotMgr = new RotMgr(); 138 139 //Is created and destroyed only once for primary 140 //For external it could get created and destroyed multiple times depending 141 //on what external we connect to. 142 ctx->mFBUpdate[HWC_DISPLAY_PRIMARY] = 143 IFBUpdate::getObject(ctx, HWC_DISPLAY_PRIMARY); 144 145 // Check if the target supports copybit compostion (dyn/mdp/c2d) to 146 // decide if we need to open the copybit module. 147 int compositionType = 148 qdutils::QCCompositionType::getInstance().getCompositionType(); 149 150 if (compositionType & (qdutils::COMPOSITION_TYPE_DYN | 151 qdutils::COMPOSITION_TYPE_MDP | 152 qdutils::COMPOSITION_TYPE_C2D)) { 153 ctx->mCopyBit[HWC_DISPLAY_PRIMARY] = new CopyBit(); 154 } 155 156 ctx->mExtDisplay = new ExternalDisplay(ctx); 157 ctx->mVirtualDisplay = new VirtualDisplay(ctx); 158 ctx->mVirtualonExtActive = false; 159 ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].isActive = false; 160 ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].connected = false; 161 ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].isActive = false; 162 ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].connected = false; 163 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].mDownScaleMode= false; 164 ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].mDownScaleMode = false; 165 ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].mDownScaleMode = false; 166 167 ctx->mMDPComp[HWC_DISPLAY_PRIMARY] = 168 MDPComp::getObject(ctx, HWC_DISPLAY_PRIMARY); 169 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].connected = true; 170 171 for (uint32_t i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { 172 ctx->mHwcDebug[i] = new HwcDebug(i); 173 ctx->mLayerRotMap[i] = new LayerRotMap(); 174 } 175 176 MDPComp::init(ctx); 177 ctx->mAD = new AssertiveDisplay(ctx); 178 179 ctx->vstate.enable = false; 180 ctx->vstate.fakevsync = false; 181 ctx->mExtOrientation = 0; 182 183 //Right now hwc starts the service but anybody could do it, or it could be 184 //independent process as well. 185 QService::init(); 186 sp<IQClient> client = new QClient(ctx); 187 interface_cast<IQService>( 188 defaultServiceManager()->getService( 189 String16("display.qservice")))->connect(client); 190 191 // Initialize "No animation on external display" related parameters. 192 ctx->deviceOrientation = 0; 193 ctx->mPrevCropVideo.left = ctx->mPrevCropVideo.top = 194 ctx->mPrevCropVideo.right = ctx->mPrevCropVideo.bottom = 0; 195 ctx->mPrevDestVideo.left = ctx->mPrevDestVideo.top = 196 ctx->mPrevDestVideo.right = ctx->mPrevDestVideo.bottom = 0; 197 ctx->mPrevTransformVideo = 0; 198 ctx->mBufferMirrorMode = false; 199#ifdef VPU_TARGET 200 ctx->mVPUClient = new VPUClient(); 201#endif 202 203 ALOGI("Initializing Qualcomm Hardware Composer"); 204 ALOGI("MDP version: %d", ctx->mMDP.version); 205} 206 207void closeContext(hwc_context_t *ctx) 208{ 209 if(ctx->mOverlay) { 210 delete ctx->mOverlay; 211 ctx->mOverlay = NULL; 212 } 213 214 if(ctx->mRotMgr) { 215 delete ctx->mRotMgr; 216 ctx->mRotMgr = NULL; 217 } 218 219 for(int i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { 220 if(ctx->mCopyBit[i]) { 221 delete ctx->mCopyBit[i]; 222 ctx->mCopyBit[i] = NULL; 223 } 224 } 225 226 if(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd) { 227 close(ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd); 228 ctx->dpyAttr[HWC_DISPLAY_PRIMARY].fd = -1; 229 } 230 231 if(ctx->mExtDisplay) { 232 delete ctx->mExtDisplay; 233 ctx->mExtDisplay = NULL; 234 } 235 236#ifdef VPU_TARGET 237 if(ctx->mVPUClient) { 238 delete ctx->mVPUClient; 239 } 240#endif 241 242 for(int i = 0; i < HWC_NUM_DISPLAY_TYPES; i++) { 243 if(ctx->mFBUpdate[i]) { 244 delete ctx->mFBUpdate[i]; 245 ctx->mFBUpdate[i] = NULL; 246 } 247 if(ctx->mMDPComp[i]) { 248 delete ctx->mMDPComp[i]; 249 ctx->mMDPComp[i] = NULL; 250 } 251 if(ctx->mHwcDebug[i]) { 252 delete ctx->mHwcDebug[i]; 253 ctx->mHwcDebug[i] = NULL; 254 } 255 if(ctx->mLayerRotMap[i]) { 256 delete ctx->mLayerRotMap[i]; 257 ctx->mLayerRotMap[i] = NULL; 258 } 259 } 260 if(ctx->mAD) { 261 delete ctx->mAD; 262 ctx->mAD = NULL; 263 } 264 265 266} 267 268 269void dumpsys_log(android::String8& buf, const char* fmt, ...) 270{ 271 va_list varargs; 272 va_start(varargs, fmt); 273 buf.appendFormatV(fmt, varargs); 274 va_end(varargs); 275} 276 277int getExtOrientation(hwc_context_t* ctx) { 278 int extOrient = ctx->mExtOrientation; 279 if(ctx->mBufferMirrorMode) 280 extOrient = getMirrorModeOrientation(ctx); 281 return extOrient; 282} 283 284/* Calculates the destination position based on the action safe rectangle */ 285void getActionSafePosition(hwc_context_t *ctx, int dpy, hwc_rect_t& rect) { 286 // Position 287 int x = rect.left, y = rect.top; 288 int w = rect.right - rect.left; 289 int h = rect.bottom - rect.top; 290 291 // if external supports underscan, do nothing 292 // it will be taken care in the driver 293 if(ctx->mExtDisplay->isCEUnderscanSupported()) 294 return; 295 296 char value[PROPERTY_VALUE_MAX]; 297 // Read action safe properties 298 property_get("persist.sys.actionsafe.width", value, "0"); 299 int asWidthRatio = atoi(value); 300 property_get("persist.sys.actionsafe.height", value, "0"); 301 int asHeightRatio = atoi(value); 302 303 if(!asWidthRatio && !asHeightRatio) { 304 //No action safe ratio set, return 305 return; 306 } 307 308 float wRatio = 1.0; 309 float hRatio = 1.0; 310 float xRatio = 1.0; 311 float yRatio = 1.0; 312 313 float fbWidth = ctx->dpyAttr[dpy].xres; 314 float fbHeight = ctx->dpyAttr[dpy].yres; 315 316 // Since external is rotated 90, need to swap width/height 317 int extOrient = getExtOrientation(ctx); 318 319 if(extOrient & HWC_TRANSFORM_ROT_90) 320 swap(fbWidth, fbHeight); 321 322 float asX = 0; 323 float asY = 0; 324 float asW = fbWidth; 325 float asH= fbHeight; 326 327 // based on the action safe ratio, get the Action safe rectangle 328 asW = fbWidth * (1.0f - asWidthRatio / 100.0f); 329 asH = fbHeight * (1.0f - asHeightRatio / 100.0f); 330 asX = (fbWidth - asW) / 2; 331 asY = (fbHeight - asH) / 2; 332 333 // calculate the position ratio 334 xRatio = (float)x/fbWidth; 335 yRatio = (float)y/fbHeight; 336 wRatio = (float)w/fbWidth; 337 hRatio = (float)h/fbHeight; 338 339 //Calculate the position... 340 x = (xRatio * asW) + asX; 341 y = (yRatio * asH) + asY; 342 w = (wRatio * asW); 343 h = (hRatio * asH); 344 345 // Convert it back to hwc_rect_t 346 rect.left = x; 347 rect.top = y; 348 rect.right = w + rect.left; 349 rect.bottom = h + rect.top; 350 351 return; 352} 353 354/* Calculates the aspect ratio for based on src & dest */ 355void getAspectRatioPosition(int destWidth, int destHeight, int srcWidth, 356 int srcHeight, hwc_rect_t& rect) { 357 int x =0, y =0; 358 359 if (srcWidth * destHeight > destWidth * srcHeight) { 360 srcHeight = destWidth * srcHeight / srcWidth; 361 srcWidth = destWidth; 362 } else if (srcWidth * destHeight < destWidth * srcHeight) { 363 srcWidth = destHeight * srcWidth / srcHeight; 364 srcHeight = destHeight; 365 } else { 366 srcWidth = destWidth; 367 srcHeight = destHeight; 368 } 369 if (srcWidth > destWidth) srcWidth = destWidth; 370 if (srcHeight > destHeight) srcHeight = destHeight; 371 x = (destWidth - srcWidth) / 2; 372 y = (destHeight - srcHeight) / 2; 373 ALOGD_IF(HWC_UTILS_DEBUG, "%s: AS Position: x = %d, y = %d w = %d h = %d", 374 __FUNCTION__, x, y, srcWidth , srcHeight); 375 // Convert it back to hwc_rect_t 376 rect.left = x; 377 rect.top = y; 378 rect.right = srcWidth + rect.left; 379 rect.bottom = srcHeight + rect.top; 380} 381 382// This function gets the destination position for Seconday display 383// based on the position and aspect ratio with orientation 384void getAspectRatioPosition(hwc_context_t* ctx, int dpy, int extOrientation, 385 hwc_rect_t& inRect, hwc_rect_t& outRect) { 386 // Physical display resolution 387 float fbWidth = ctx->dpyAttr[dpy].xres; 388 float fbHeight = ctx->dpyAttr[dpy].yres; 389 //display position(x,y,w,h) in correct aspectratio after rotation 390 int xPos = 0; 391 int yPos = 0; 392 float width = fbWidth; 393 float height = fbHeight; 394 // Width/Height used for calculation, after rotation 395 float actualWidth = fbWidth; 396 float actualHeight = fbHeight; 397 398 float wRatio = 1.0; 399 float hRatio = 1.0; 400 float xRatio = 1.0; 401 float yRatio = 1.0; 402 hwc_rect_t rect = {0, 0, (int)fbWidth, (int)fbHeight}; 403 404 Dim inPos(inRect.left, inRect.top, inRect.right - inRect.left, 405 inRect.bottom - inRect.top); 406 Dim outPos(outRect.left, outRect.top, outRect.right - outRect.left, 407 outRect.bottom - outRect.top); 408 409 Whf whf(fbWidth, fbHeight, 0); 410 eTransform extorient = static_cast<eTransform>(extOrientation); 411 // To calculate the destination co-ordinates in the new orientation 412 preRotateSource(extorient, whf, inPos); 413 414 if(extOrientation & HAL_TRANSFORM_ROT_90) { 415 // Swap width/height for input position 416 swapWidthHeight(actualWidth, actualHeight); 417 getAspectRatioPosition(fbWidth, fbHeight, (int)actualWidth, 418 (int)actualHeight, rect); 419 xPos = rect.left; 420 yPos = rect.top; 421 width = rect.right - rect.left; 422 height = rect.bottom - rect.top; 423 } 424 425 //Calculate the position... 426 xRatio = inPos.x/actualWidth; 427 yRatio = inPos.y/actualHeight; 428 wRatio = inPos.w/actualWidth; 429 hRatio = inPos.h/actualHeight; 430 431 outPos.x = (xRatio * width) + xPos; 432 outPos.y = (yRatio * height) + yPos; 433 outPos.w = wRatio * width; 434 outPos.h = hRatio * height; 435 ALOGD_IF(HWC_UTILS_DEBUG, "%s: Calculated AspectRatio Position: x = %d," 436 "y = %d w = %d h = %d", __FUNCTION__, outPos.x, outPos.y, 437 outPos.w, outPos.h); 438 439 // For sidesync, the dest fb will be in portrait orientation, and the crop 440 // will be updated to avoid the black side bands, and it will be upscaled 441 // to fit the dest RB, so recalculate 442 // the position based on the new width and height 443 if ((extOrientation & HWC_TRANSFORM_ROT_90) && 444 isOrientationPortrait(ctx)) { 445 hwc_rect_t r; 446 //Calculate the position 447 xRatio = (outPos.x - xPos)/width; 448 // GetaspectRatio -- tricky to get the correct aspect ratio 449 // But we need to do this. 450 getAspectRatioPosition(width, height, width, height, r); 451 xPos = r.left; 452 yPos = r.top; 453 float tempWidth = r.right - r.left; 454 float tempHeight = r.bottom - r.top; 455 yRatio = yPos/height; 456 wRatio = outPos.w/width; 457 hRatio = tempHeight/height; 458 459 //Map the coordinates back to Framebuffer domain 460 outPos.x = (xRatio * fbWidth); 461 outPos.y = (yRatio * fbHeight); 462 outPos.w = wRatio * fbWidth; 463 outPos.h = hRatio * fbHeight; 464 465 ALOGD_IF(HWC_UTILS_DEBUG, "%s: Calculated AspectRatio for device in" 466 "portrait: x = %d,y = %d w = %d h = %d", __FUNCTION__, 467 outPos.x, outPos.y, 468 outPos.w, outPos.h); 469 } 470 if(ctx->dpyAttr[dpy].mDownScaleMode) { 471 int extW, extH; 472 if(dpy == HWC_DISPLAY_EXTERNAL) 473 ctx->mExtDisplay->getAttributes(extW, extH); 474 else 475 ctx->mVirtualDisplay->getAttributes(extW, extH); 476 fbWidth = ctx->dpyAttr[dpy].xres; 477 fbHeight = ctx->dpyAttr[dpy].yres; 478 //Calculate the position... 479 xRatio = outPos.x/fbWidth; 480 yRatio = outPos.y/fbHeight; 481 wRatio = outPos.w/fbWidth; 482 hRatio = outPos.h/fbHeight; 483 484 outPos.x = xRatio * extW; 485 outPos.y = yRatio * extH; 486 outPos.w = wRatio * extW; 487 outPos.h = hRatio * extH; 488 } 489 // Convert Dim to hwc_rect_t 490 outRect.left = outPos.x; 491 outRect.top = outPos.y; 492 outRect.right = outPos.x + outPos.w; 493 outRect.bottom = outPos.y + outPos.h; 494 495 return; 496} 497 498bool isPrimaryPortrait(hwc_context_t *ctx) { 499 int fbWidth = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; 500 int fbHeight = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; 501 if(fbWidth < fbHeight) { 502 return true; 503 } 504 return false; 505} 506 507bool isOrientationPortrait(hwc_context_t *ctx) { 508 if(isPrimaryPortrait(ctx)) { 509 return !(ctx->deviceOrientation & 0x1); 510 } 511 return (ctx->deviceOrientation & 0x1); 512} 513 514void calcExtDisplayPosition(hwc_context_t *ctx, 515 private_handle_t *hnd, 516 int dpy, 517 hwc_rect_t& sourceCrop, 518 hwc_rect_t& displayFrame, 519 int& transform, 520 ovutils::eTransform& orient) { 521 // Swap width and height when there is a 90deg transform 522 int extOrient = getExtOrientation(ctx); 523 if(dpy && !qdutils::MDPVersion::getInstance().is8x26()) { 524 if(!isYuvBuffer(hnd)) { 525 if(extOrient & HWC_TRANSFORM_ROT_90) { 526 int dstWidth = ctx->dpyAttr[dpy].xres; 527 int dstHeight = ctx->dpyAttr[dpy].yres;; 528 int srcWidth = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].xres; 529 int srcHeight = ctx->dpyAttr[HWC_DISPLAY_PRIMARY].yres; 530 if(!isPrimaryPortrait(ctx)) { 531 swap(srcWidth, srcHeight); 532 } // Get Aspect Ratio for external 533 getAspectRatioPosition(dstWidth, dstHeight, srcWidth, 534 srcHeight, displayFrame); 535 // Crop - this is needed, because for sidesync, the dest fb will 536 // be in portrait orientation, so update the crop to not show the 537 // black side bands. 538 if (isOrientationPortrait(ctx)) { 539 sourceCrop = displayFrame; 540 displayFrame.left = 0; 541 displayFrame.top = 0; 542 displayFrame.right = dstWidth; 543 displayFrame.bottom = dstHeight; 544 } 545 } 546 if(ctx->dpyAttr[dpy].mDownScaleMode) { 547 int extW, extH; 548 // if downscale is enabled, map the co-ordinates to new 549 // domain(downscaled) 550 float fbWidth = ctx->dpyAttr[dpy].xres; 551 float fbHeight = ctx->dpyAttr[dpy].yres; 552 // query MDP configured attributes 553 if(dpy == HWC_DISPLAY_EXTERNAL) 554 ctx->mExtDisplay->getAttributes(extW, extH); 555 else 556 ctx->mVirtualDisplay->getAttributes(extW, extH); 557 //Calculate the ratio... 558 float wRatio = ((float)extW)/fbWidth; 559 float hRatio = ((float)extH)/fbHeight; 560 561 //convert Dim to hwc_rect_t 562 displayFrame.left *= wRatio; 563 displayFrame.top *= hRatio; 564 displayFrame.right *= wRatio; 565 displayFrame.bottom *= hRatio; 566 } 567 }else { 568 if(extOrient || ctx->dpyAttr[dpy].mDownScaleMode) { 569 getAspectRatioPosition(ctx, dpy, extOrient, 570 displayFrame, displayFrame); 571 } 572 } 573 // If there is a external orientation set, use that 574 if(extOrient) { 575 transform = extOrient; 576 orient = static_cast<ovutils::eTransform >(extOrient); 577 } 578 // Calculate the actionsafe dimensions for External(dpy = 1 or 2) 579 getActionSafePosition(ctx, dpy, displayFrame); 580 } 581} 582 583/* Returns the orientation which needs to be set on External for 584 * SideSync/Buffer Mirrormode 585 */ 586int getMirrorModeOrientation(hwc_context_t *ctx) { 587 int extOrientation = 0; 588 int deviceOrientation = ctx->deviceOrientation; 589 if(!isPrimaryPortrait(ctx)) 590 deviceOrientation = (deviceOrientation + 1) % 4; 591 if (deviceOrientation == 0) 592 extOrientation = HWC_TRANSFORM_ROT_270; 593 else if (deviceOrientation == 1)//90 594 extOrientation = 0; 595 else if (deviceOrientation == 2)//180 596 extOrientation = HWC_TRANSFORM_ROT_90; 597 else if (deviceOrientation == 3)//270 598 extOrientation = HWC_TRANSFORM_FLIP_V | HWC_TRANSFORM_FLIP_H; 599 600 return extOrientation; 601} 602 603bool needsScaling(hwc_context_t* ctx, hwc_layer_1_t const* layer, 604 const int& dpy) { 605 int dst_w, dst_h, src_w, src_h; 606 607 hwc_rect_t displayFrame = layer->displayFrame; 608 hwc_rect_t sourceCrop = layer->sourceCrop; 609 trimLayer(ctx, dpy, layer->transform, sourceCrop, displayFrame); 610 611 dst_w = displayFrame.right - displayFrame.left; 612 dst_h = displayFrame.bottom - displayFrame.top; 613 src_w = sourceCrop.right - sourceCrop.left; 614 src_h = sourceCrop.bottom - sourceCrop.top; 615 616 if(((src_w != dst_w) || (src_h != dst_h))) 617 return true; 618 619 return false; 620} 621 622// Checks if layer needs scaling with split 623bool needsScalingWithSplit(hwc_context_t* ctx, hwc_layer_1_t const* layer, 624 const int& dpy) { 625 626 int src_width_l, src_height_l; 627 int src_width_r, src_height_r; 628 int dst_width_l, dst_height_l; 629 int dst_width_r, dst_height_r; 630 int hw_w = ctx->dpyAttr[dpy].xres; 631 int hw_h = ctx->dpyAttr[dpy].yres; 632 hwc_rect_t cropL, dstL, cropR, dstR; 633 const int lSplit = getLeftSplit(ctx, dpy); 634 hwc_rect_t sourceCrop = layer->sourceCrop; 635 hwc_rect_t displayFrame = layer->displayFrame; 636 private_handle_t *hnd = (private_handle_t *)layer->handle; 637 trimLayer(ctx, dpy, layer->transform, sourceCrop, displayFrame); 638 639 cropL = sourceCrop; 640 dstL = displayFrame; 641 hwc_rect_t scissorL = { 0, 0, lSplit, hw_h }; 642 qhwc::calculate_crop_rects(cropL, dstL, scissorL, 0); 643 644 cropR = sourceCrop; 645 dstR = displayFrame; 646 hwc_rect_t scissorR = { lSplit, 0, hw_w, hw_h }; 647 qhwc::calculate_crop_rects(cropR, dstR, scissorR, 0); 648 649 // Sanitize Crop to stitch 650 sanitizeSourceCrop(cropL, cropR, hnd); 651 652 // Calculate the left dst 653 dst_width_l = dstL.right - dstL.left; 654 dst_height_l = dstL.bottom - dstL.top; 655 src_width_l = cropL.right - cropL.left; 656 src_height_l = cropL.bottom - cropL.top; 657 658 // check if there is any scaling on the left 659 if(((src_width_l != dst_width_l) || (src_height_l != dst_height_l))) 660 return true; 661 662 // Calculate the right dst 663 dst_width_r = dstR.right - dstR.left; 664 dst_height_r = dstR.bottom - dstR.top; 665 src_width_r = cropR.right - cropR.left; 666 src_height_r = cropR.bottom - cropR.top; 667 668 // check if there is any scaling on the right 669 if(((src_width_r != dst_width_r) || (src_height_r != dst_height_r))) 670 return true; 671 672 return false; 673} 674 675bool isAlphaScaled(hwc_context_t* ctx, hwc_layer_1_t const* layer, 676 const int& dpy) { 677 if(needsScaling(ctx, layer, dpy) && isAlphaPresent(layer)) { 678 return true; 679 } 680 return false; 681} 682 683bool isAlphaPresent(hwc_layer_1_t const* layer) { 684 private_handle_t *hnd = (private_handle_t *)layer->handle; 685 if(hnd) { 686 int format = hnd->format; 687 switch(format) { 688 case HAL_PIXEL_FORMAT_RGBA_8888: 689 case HAL_PIXEL_FORMAT_BGRA_8888: 690 // In any more formats with Alpha go here.. 691 return true; 692 default : return false; 693 } 694 } 695 return false; 696} 697 698void setListStats(hwc_context_t *ctx, 699 const hwc_display_contents_1_t *list, int dpy) { 700 const int prevYuvCount = ctx->listStats[dpy].yuvCount; 701 memset(&ctx->listStats[dpy], 0, sizeof(ListStats)); 702 ctx->listStats[dpy].numAppLayers = list->numHwLayers - 1; 703 ctx->listStats[dpy].fbLayerIndex = list->numHwLayers - 1; 704 ctx->listStats[dpy].skipCount = 0; 705 ctx->listStats[dpy].needsAlphaScale = false; 706 ctx->listStats[dpy].preMultipliedAlpha = false; 707 ctx->listStats[dpy].yuvCount = 0; 708 char property[PROPERTY_VALUE_MAX]; 709 ctx->listStats[dpy].extOnlyLayerIndex = -1; 710 ctx->listStats[dpy].isDisplayAnimating = false; 711 ctx->listStats[dpy].roi = ovutils::Dim(0, 0, 712 (int)ctx->dpyAttr[dpy].xres, (int)ctx->dpyAttr[dpy].yres); 713 714 optimizeLayerRects(ctx, list, dpy); 715 716 for (size_t i = 0; i < (size_t)ctx->listStats[dpy].numAppLayers; i++) { 717 hwc_layer_1_t const* layer = &list->hwLayers[i]; 718 private_handle_t *hnd = (private_handle_t *)layer->handle; 719 720#ifdef QCOM_BSP 721 if (layer->flags & HWC_SCREENSHOT_ANIMATOR_LAYER) { 722 ctx->listStats[dpy].isDisplayAnimating = true; 723 } 724#endif 725 // continue if number of app layers exceeds MAX_NUM_APP_LAYERS 726 if(ctx->listStats[dpy].numAppLayers > MAX_NUM_APP_LAYERS) 727 continue; 728 729 //reset yuv indices 730 ctx->listStats[dpy].yuvIndices[i] = -1; 731 732 if (isSkipLayer(&list->hwLayers[i])) { 733 ctx->listStats[dpy].skipCount++; 734 } 735 736 if (UNLIKELY(isYuvBuffer(hnd))) { 737 int& yuvCount = ctx->listStats[dpy].yuvCount; 738 ctx->listStats[dpy].yuvIndices[yuvCount] = i; 739 yuvCount++; 740 741 if((layer->transform & HWC_TRANSFORM_ROT_90) && 742 canUseRotator(ctx, dpy)) { 743 if( (dpy == HWC_DISPLAY_PRIMARY) && 744 ctx->mOverlay->isPipeTypeAttached(OV_MDP_PIPE_DMA)) { 745 ctx->isPaddingRound = true; 746 } 747 Overlay::setDMAMode(Overlay::DMA_BLOCK_MODE); 748 } 749 } 750 if(layer->blending == HWC_BLENDING_PREMULT) 751 ctx->listStats[dpy].preMultipliedAlpha = true; 752 753 if(!ctx->listStats[dpy].needsAlphaScale) 754 ctx->listStats[dpy].needsAlphaScale = 755 isAlphaScaled(ctx, layer, dpy); 756 757 if(UNLIKELY(isExtOnly(hnd))){ 758 ctx->listStats[dpy].extOnlyLayerIndex = i; 759 } 760 } 761 if(ctx->listStats[dpy].yuvCount > 0) { 762 if (property_get("hw.cabl.yuv", property, NULL) > 0) { 763 if (atoi(property) != 1) { 764 property_set("hw.cabl.yuv", "1"); 765 } 766 } 767 } else { 768 if (property_get("hw.cabl.yuv", property, NULL) > 0) { 769 if (atoi(property) != 0) { 770 property_set("hw.cabl.yuv", "0"); 771 } 772 } 773 } 774 if(dpy) { 775 //uncomment the below code for testing purpose. 776 /* char value[PROPERTY_VALUE_MAX]; 777 property_get("sys.ext_orientation", value, "0"); 778 // Assuming the orientation value is in terms of HAL_TRANSFORM, 779 // This needs mapping to HAL, if its in different convention 780 ctx->mExtOrientation = atoi(value); */ 781 // Assuming the orientation value is in terms of HAL_TRANSFORM, 782 // This needs mapping to HAL, if its in different convention 783 if(ctx->mExtOrientation || ctx->mBufferMirrorMode) { 784 ALOGD_IF(HWC_UTILS_DEBUG, "%s: ext orientation = %d" 785 "BufferMirrorMode = %d", __FUNCTION__, 786 ctx->mExtOrientation, ctx->mBufferMirrorMode); 787 if(ctx->mOverlay->isPipeTypeAttached(OV_MDP_PIPE_DMA)) { 788 ctx->isPaddingRound = true; 789 } 790 Overlay::setDMAMode(Overlay::DMA_BLOCK_MODE); 791 } 792 } 793 794 //The marking of video begin/end is useful on some targets where we need 795 //to have a padding round to be able to shift pipes across mixers. 796 if(prevYuvCount != ctx->listStats[dpy].yuvCount) { 797 ctx->mVideoTransFlag = true; 798 } 799 if(dpy == HWC_DISPLAY_PRIMARY) { 800 ctx->mAD->markDoable(ctx, list); 801 } 802} 803 804 805static void calc_cut(double& leftCutRatio, double& topCutRatio, 806 double& rightCutRatio, double& bottomCutRatio, int orient) { 807 if(orient & HAL_TRANSFORM_FLIP_H) { 808 swap(leftCutRatio, rightCutRatio); 809 } 810 if(orient & HAL_TRANSFORM_FLIP_V) { 811 swap(topCutRatio, bottomCutRatio); 812 } 813 if(orient & HAL_TRANSFORM_ROT_90) { 814 //Anti clock swapping 815 double tmpCutRatio = leftCutRatio; 816 leftCutRatio = topCutRatio; 817 topCutRatio = rightCutRatio; 818 rightCutRatio = bottomCutRatio; 819 bottomCutRatio = tmpCutRatio; 820 } 821} 822 823bool isSecuring(hwc_context_t* ctx, hwc_layer_1_t const* layer) { 824 if((ctx->mMDP.version < qdutils::MDSS_V5) && 825 (ctx->mMDP.version > qdutils::MDP_V3_0) && 826 ctx->mSecuring) { 827 return true; 828 } 829 if (isSecureModePolicy(ctx->mMDP.version)) { 830 private_handle_t *hnd = (private_handle_t *)layer->handle; 831 if(ctx->mSecureMode) { 832 if (! isSecureBuffer(hnd)) { 833 ALOGD_IF(HWC_UTILS_DEBUG,"%s:Securing Turning ON ...", 834 __FUNCTION__); 835 return true; 836 } 837 } else { 838 if (isSecureBuffer(hnd)) { 839 ALOGD_IF(HWC_UTILS_DEBUG,"%s:Securing Turning OFF ...", 840 __FUNCTION__); 841 return true; 842 } 843 } 844 } 845 return false; 846} 847 848bool isSecureModePolicy(int mdpVersion) { 849 if (mdpVersion < qdutils::MDSS_V5) 850 return true; 851 else 852 return false; 853} 854 855int getBlending(int blending) { 856 switch(blending) { 857 case HWC_BLENDING_NONE: 858 return overlay::utils::OVERLAY_BLENDING_OPAQUE; 859 case HWC_BLENDING_PREMULT: 860 return overlay::utils::OVERLAY_BLENDING_PREMULT; 861 case HWC_BLENDING_COVERAGE : 862 default: 863 return overlay::utils::OVERLAY_BLENDING_COVERAGE; 864 } 865} 866 867//Crops source buffer against destination and FB boundaries 868void calculate_crop_rects(hwc_rect_t& crop, hwc_rect_t& dst, 869 const hwc_rect_t& scissor, int orient) { 870 871 int& crop_l = crop.left; 872 int& crop_t = crop.top; 873 int& crop_r = crop.right; 874 int& crop_b = crop.bottom; 875 int crop_w = crop.right - crop.left; 876 int crop_h = crop.bottom - crop.top; 877 878 int& dst_l = dst.left; 879 int& dst_t = dst.top; 880 int& dst_r = dst.right; 881 int& dst_b = dst.bottom; 882 int dst_w = abs(dst.right - dst.left); 883 int dst_h = abs(dst.bottom - dst.top); 884 885 const int& sci_l = scissor.left; 886 const int& sci_t = scissor.top; 887 const int& sci_r = scissor.right; 888 const int& sci_b = scissor.bottom; 889 int sci_w = abs(sci_r - sci_l); 890 int sci_h = abs(sci_b - sci_t); 891 892 double leftCutRatio = 0.0, rightCutRatio = 0.0, topCutRatio = 0.0, 893 bottomCutRatio = 0.0; 894 895 if(dst_l < sci_l) { 896 leftCutRatio = (double)(sci_l - dst_l) / (double)dst_w; 897 dst_l = sci_l; 898 } 899 900 if(dst_r > sci_r) { 901 rightCutRatio = (double)(dst_r - sci_r) / (double)dst_w; 902 dst_r = sci_r; 903 } 904 905 if(dst_t < sci_t) { 906 topCutRatio = (double)(sci_t - dst_t) / (double)dst_h; 907 dst_t = sci_t; 908 } 909 910 if(dst_b > sci_b) { 911 bottomCutRatio = (double)(dst_b - sci_b) / (double)dst_h; 912 dst_b = sci_b; 913 } 914 915 calc_cut(leftCutRatio, topCutRatio, rightCutRatio, bottomCutRatio, orient); 916 crop_l += crop_w * leftCutRatio; 917 crop_t += crop_h * topCutRatio; 918 crop_r -= crop_w * rightCutRatio; 919 crop_b -= crop_h * bottomCutRatio; 920} 921 922bool isValidRect(const hwc_rect& rect) 923{ 924 return ((rect.bottom > rect.top) && (rect.right > rect.left)) ; 925} 926 927/* computes the intersection of two rects */ 928hwc_rect_t getIntersection(const hwc_rect_t& rect1, const hwc_rect_t& rect2) 929{ 930 hwc_rect_t res; 931 932 if(!isValidRect(rect1) || !isValidRect(rect2)){ 933 return (hwc_rect_t){0, 0, 0, 0}; 934 } 935 936 937 res.left = max(rect1.left, rect2.left); 938 res.top = max(rect1.top, rect2.top); 939 res.right = min(rect1.right, rect2.right); 940 res.bottom = min(rect1.bottom, rect2.bottom); 941 942 if(!isValidRect(res)) 943 return (hwc_rect_t){0, 0, 0, 0}; 944 945 return res; 946} 947 948/* computes the union of two rects */ 949hwc_rect_t getUnion(const hwc_rect &rect1, const hwc_rect &rect2) 950{ 951 hwc_rect_t res; 952 953 if(!isValidRect(rect1)){ 954 return rect2; 955 } 956 957 if(!isValidRect(rect2)){ 958 return rect1; 959 } 960 961 res.left = min(rect1.left, rect2.left); 962 res.top = min(rect1.top, rect2.top); 963 res.right = max(rect1.right, rect2.right); 964 res.bottom = max(rect1.bottom, rect2.bottom); 965 966 return res; 967} 968 969/* deducts given rect from layers display-frame and source crop. 970 also it avoid hole creation.*/ 971void deductRect(const hwc_layer_1_t* layer, hwc_rect_t& irect) { 972 hwc_rect_t& disprect = (hwc_rect_t&)layer->displayFrame; 973 hwc_rect_t& srcrect = (hwc_rect_t&)layer->sourceCrop; 974 int irect_w = irect.right - irect.left; 975 int irect_h = irect.bottom - irect.top; 976 977 if((disprect.left == irect.left) && (disprect.right == irect.right)) { 978 if((disprect.top == irect.top) && (irect.bottom <= disprect.bottom)) { 979 disprect.top = irect.bottom; 980 srcrect.top += irect_h; 981 } 982 else if((disprect.bottom == irect.bottom) 983 && (irect.top >= disprect.top)) { 984 disprect.bottom = irect.top; 985 srcrect.bottom -= irect_h; 986 } 987 } 988 else if((disprect.top == irect.top) && (disprect.bottom == irect.bottom)) { 989 if((disprect.left == irect.left) && (irect.right <= disprect.right)) { 990 disprect.left = irect.right; 991 srcrect.left += irect_w; 992 } 993 else if((disprect.right == irect.right) 994 && (irect.left >= disprect.left)) { 995 disprect.right = irect.left; 996 srcrect.right -= irect_w; 997 } 998 } 999} 1000 1001void optimizeLayerRects(hwc_context_t *ctx, 1002 const hwc_display_contents_1_t *list, const int& dpy) { 1003 int i=list->numHwLayers-2; 1004 hwc_rect_t irect; 1005 while(i > 0) { 1006 1007 //see if there is no blending required. 1008 //If it is opaque see if we can substract this region from below layers. 1009 if(list->hwLayers[i].blending == HWC_BLENDING_NONE) { 1010 int j= i-1; 1011 hwc_rect_t& topframe = 1012 (hwc_rect_t&)list->hwLayers[i].displayFrame; 1013 while(j >= 0) { 1014 if(!needsScaling(ctx, &list->hwLayers[j], dpy)) { 1015 hwc_rect_t& bottomframe = 1016 (hwc_rect_t&)list->hwLayers[j].displayFrame; 1017 1018 hwc_rect_t irect = getIntersection(bottomframe, topframe); 1019 if(isValidRect(irect)) { 1020 //if intersection is valid rect, deduct it 1021 deductRect(&list->hwLayers[j], irect); 1022 } 1023 } 1024 j--; 1025 } 1026 } 1027 i--; 1028 } 1029} 1030 1031void getNonWormholeRegion(hwc_display_contents_1_t* list, 1032 hwc_rect_t& nwr) 1033{ 1034 uint32_t last = list->numHwLayers - 1; 1035 hwc_rect_t fbDisplayFrame = list->hwLayers[last].displayFrame; 1036 //Initiliaze nwr to first frame 1037 nwr.left = list->hwLayers[0].displayFrame.left; 1038 nwr.top = list->hwLayers[0].displayFrame.top; 1039 nwr.right = list->hwLayers[0].displayFrame.right; 1040 nwr.bottom = list->hwLayers[0].displayFrame.bottom; 1041 1042 for (uint32_t i = 1; i < last; i++) { 1043 hwc_rect_t displayFrame = list->hwLayers[i].displayFrame; 1044 nwr = getUnion(nwr, displayFrame); 1045 } 1046 1047 //Intersect with the framebuffer 1048 nwr = getIntersection(nwr, fbDisplayFrame); 1049} 1050 1051bool isExternalActive(hwc_context_t* ctx) { 1052 return ctx->dpyAttr[HWC_DISPLAY_EXTERNAL].isActive; 1053} 1054 1055void closeAcquireFds(hwc_display_contents_1_t* list) { 1056 for(uint32_t i = 0; list && i < list->numHwLayers; i++) { 1057 //Close the acquireFenceFds 1058 //HWC_FRAMEBUFFER are -1 already by SF, rest we close. 1059 if(list->hwLayers[i].acquireFenceFd >= 0) { 1060 close(list->hwLayers[i].acquireFenceFd); 1061 list->hwLayers[i].acquireFenceFd = -1; 1062 } 1063 } 1064} 1065 1066int hwc_sync(hwc_context_t *ctx, hwc_display_contents_1_t* list, int dpy, 1067 int fd) { 1068 ATRACE_CALL(); 1069 int ret = 0; 1070 int acquireFd[MAX_NUM_APP_LAYERS]; 1071 int count = 0; 1072 int releaseFd = -1; 1073 int fbFd = -1; 1074 bool swapzero = false; 1075 int mdpVersion = qdutils::MDPVersion::getInstance().getMDPVersion(); 1076 1077 struct mdp_buf_sync data; 1078 memset(&data, 0, sizeof(data)); 1079 data.acq_fen_fd = acquireFd; 1080 data.rel_fen_fd = &releaseFd; 1081 1082 char property[PROPERTY_VALUE_MAX]; 1083 if(property_get("debug.egl.swapinterval", property, "1") > 0) { 1084 if(atoi(property) == 0) 1085 swapzero = true; 1086 } 1087 1088 bool isExtAnimating = false; 1089 if(dpy) 1090 isExtAnimating = ctx->listStats[dpy].isDisplayAnimating; 1091 1092 //Send acquireFenceFds to rotator 1093 for(uint32_t i = 0; i < ctx->mLayerRotMap[dpy]->getCount(); i++) { 1094 int rotFd = ctx->mRotMgr->getRotDevFd(); 1095 int rotReleaseFd = -1; 1096 struct mdp_buf_sync rotData; 1097 memset(&rotData, 0, sizeof(rotData)); 1098 rotData.acq_fen_fd = 1099 &ctx->mLayerRotMap[dpy]->getLayer(i)->acquireFenceFd; 1100 rotData.rel_fen_fd = &rotReleaseFd; //driver to populate this 1101 rotData.session_id = ctx->mLayerRotMap[dpy]->getRot(i)->getSessId(); 1102 int ret = 0; 1103 ret = ioctl(rotFd, MSMFB_BUFFER_SYNC, &rotData); 1104 if(ret < 0) { 1105 ALOGE("%s: ioctl MSMFB_BUFFER_SYNC failed for rot sync, err=%s", 1106 __FUNCTION__, strerror(errno)); 1107 } else { 1108 close(ctx->mLayerRotMap[dpy]->getLayer(i)->acquireFenceFd); 1109 //For MDP to wait on. 1110 ctx->mLayerRotMap[dpy]->getLayer(i)->acquireFenceFd = 1111 dup(rotReleaseFd); 1112 //A buffer is free to be used by producer as soon as its copied to 1113 //rotator 1114 ctx->mLayerRotMap[dpy]->getLayer(i)->releaseFenceFd = 1115 rotReleaseFd; 1116 } 1117 } 1118 1119 //Accumulate acquireFenceFds for MDP 1120 for(uint32_t i = 0; i < list->numHwLayers; i++) { 1121 if(list->hwLayers[i].compositionType == HWC_OVERLAY && 1122 list->hwLayers[i].acquireFenceFd >= 0) { 1123 if(UNLIKELY(swapzero)) 1124 acquireFd[count++] = -1; 1125 else 1126 acquireFd[count++] = list->hwLayers[i].acquireFenceFd; 1127 } 1128 if(list->hwLayers[i].compositionType == HWC_FRAMEBUFFER_TARGET) { 1129 if(UNLIKELY(swapzero)) 1130 acquireFd[count++] = -1; 1131 else if(fd >= 0) { 1132 //set the acquireFD from fd - which is coming from c2d 1133 acquireFd[count++] = fd; 1134 // Buffer sync IOCTL should be async when using c2d fence is 1135 // used 1136 data.flags &= ~MDP_BUF_SYNC_FLAG_WAIT; 1137 } else if(list->hwLayers[i].acquireFenceFd >= 0) 1138 acquireFd[count++] = list->hwLayers[i].acquireFenceFd; 1139 } 1140 } 1141 1142 data.acq_fen_fd_cnt = count; 1143 fbFd = ctx->dpyAttr[dpy].fd; 1144 1145 //Waits for acquire fences, returns a release fence 1146 if(LIKELY(!swapzero)) { 1147 uint64_t start = systemTime(); 1148 ret = ioctl(fbFd, MSMFB_BUFFER_SYNC, &data); 1149 ALOGD_IF(HWC_UTILS_DEBUG, "%s: time taken for MSMFB_BUFFER_SYNC IOCTL = %d", 1150 __FUNCTION__, (size_t) ns2ms(systemTime() - start)); 1151 } 1152 1153 if(ret < 0) { 1154 ALOGE("%s: ioctl MSMFB_BUFFER_SYNC failed, err=%s", 1155 __FUNCTION__, strerror(errno)); 1156 ALOGE("%s: acq_fen_fd_cnt=%d flags=%d fd=%d dpy=%d numHwLayers=%d", 1157 __FUNCTION__, data.acq_fen_fd_cnt, data.flags, fbFd, 1158 dpy, list->numHwLayers); 1159 } 1160 1161 for(uint32_t i = 0; i < list->numHwLayers; i++) { 1162 if(list->hwLayers[i].compositionType == HWC_OVERLAY || 1163 list->hwLayers[i].compositionType == HWC_FRAMEBUFFER_TARGET) { 1164 //Populate releaseFenceFds. 1165 if(UNLIKELY(swapzero)) { 1166 list->hwLayers[i].releaseFenceFd = -1; 1167 } else if(isExtAnimating) { 1168 // Release all the app layer fds immediately, 1169 // if animation is in progress. 1170 hwc_layer_1_t const* layer = &list->hwLayers[i]; 1171 private_handle_t *hnd = (private_handle_t *)layer->handle; 1172 if(isYuvBuffer(hnd)) { 1173 list->hwLayers[i].releaseFenceFd = dup(releaseFd); 1174 } else 1175 list->hwLayers[i].releaseFenceFd = -1; 1176 } else if(list->hwLayers[i].releaseFenceFd < 0) { 1177 //If rotator has not already populated this field. 1178 list->hwLayers[i].releaseFenceFd = dup(releaseFd); 1179 } 1180 } 1181 } 1182 1183 if(fd >= 0) { 1184 close(fd); 1185 fd = -1; 1186 } 1187 1188 if (ctx->mCopyBit[dpy]) 1189 ctx->mCopyBit[dpy]->setReleaseFd(releaseFd); 1190 1191 //Signals when MDP finishes reading rotator buffers. 1192 ctx->mLayerRotMap[dpy]->setReleaseFd(releaseFd); 1193 1194 // if external is animating, close the relaseFd 1195 if(isExtAnimating) { 1196 close(releaseFd); 1197 releaseFd = -1; 1198 } 1199 1200 if(UNLIKELY(swapzero)){ 1201 list->retireFenceFd = -1; 1202 close(releaseFd); 1203 } else { 1204 list->retireFenceFd = releaseFd; 1205 } 1206 1207 return ret; 1208} 1209 1210void trimLayer(hwc_context_t *ctx, const int& dpy, const int& transform, 1211 hwc_rect_t& crop, hwc_rect_t& dst) { 1212 int hw_w = ctx->dpyAttr[dpy].xres; 1213 int hw_h = ctx->dpyAttr[dpy].yres; 1214 if(dst.left < 0 || dst.top < 0 || 1215 dst.right > hw_w || dst.bottom > hw_h) { 1216 hwc_rect_t scissor = {0, 0, hw_w, hw_h }; 1217 qhwc::calculate_crop_rects(crop, dst, scissor, transform); 1218 } 1219} 1220 1221void setMdpFlags(hwc_layer_1_t *layer, 1222 ovutils::eMdpFlags &mdpFlags, 1223 int rotDownscale, int transform) { 1224 private_handle_t *hnd = (private_handle_t *)layer->handle; 1225 MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; 1226 1227 if(layer->blending == HWC_BLENDING_PREMULT) { 1228 ovutils::setMdpFlags(mdpFlags, 1229 ovutils::OV_MDP_BLEND_FG_PREMULT); 1230 } 1231 1232 if(isYuvBuffer(hnd)) { 1233 if(isSecureBuffer(hnd)) { 1234 ovutils::setMdpFlags(mdpFlags, 1235 ovutils::OV_MDP_SECURE_OVERLAY_SESSION); 1236 } 1237 if(metadata && (metadata->operation & PP_PARAM_INTERLACED) && 1238 metadata->interlaced) { 1239 ovutils::setMdpFlags(mdpFlags, 1240 ovutils::OV_MDP_DEINTERLACE); 1241 } 1242 //Pre-rotation will be used using rotator. 1243 if(transform & HWC_TRANSFORM_ROT_90) { 1244 ovutils::setMdpFlags(mdpFlags, 1245 ovutils::OV_MDP_SOURCE_ROTATED_90); 1246 } 1247 } 1248 1249 //No 90 component and no rot-downscale then flips done by MDP 1250 //If we use rot then it might as well do flips 1251 if(!(transform & HWC_TRANSFORM_ROT_90) && !rotDownscale) { 1252 if(transform & HWC_TRANSFORM_FLIP_H) { 1253 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_FLIP_H); 1254 } 1255 1256 if(transform & HWC_TRANSFORM_FLIP_V) { 1257 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_FLIP_V); 1258 } 1259 } 1260 1261 if(metadata && 1262 ((metadata->operation & PP_PARAM_HSIC) 1263 || (metadata->operation & PP_PARAM_IGC) 1264 || (metadata->operation & PP_PARAM_SHARP2))) { 1265 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDP_PP_EN); 1266 } 1267} 1268 1269int configRotator(Rotator *rot, Whf& whf, 1270 hwc_rect_t& crop, const eMdpFlags& mdpFlags, 1271 const eTransform& orient, const int& downscale) { 1272 1273 // Fix alignments for TILED format 1274 if(whf.format == MDP_Y_CRCB_H2V2_TILE || 1275 whf.format == MDP_Y_CBCR_H2V2_TILE) { 1276 whf.w = utils::alignup(whf.w, 64); 1277 whf.h = utils::alignup(whf.h, 32); 1278 } 1279 rot->setSource(whf); 1280 1281 if (qdutils::MDPVersion::getInstance().getMDPVersion() >= 1282 qdutils::MDSS_V5) { 1283 uint32_t crop_w = (crop.right - crop.left); 1284 uint32_t crop_h = (crop.bottom - crop.top); 1285 if (ovutils::isYuv(whf.format)) { 1286 ovutils::normalizeCrop((uint32_t&)crop.left, crop_w); 1287 ovutils::normalizeCrop((uint32_t&)crop.top, crop_h); 1288 // For interlaced, crop.h should be 4-aligned 1289 if ((mdpFlags & ovutils::OV_MDP_DEINTERLACE) && (crop_h % 4)) 1290 crop_h = ovutils::aligndown(crop_h, 4); 1291 crop.right = crop.left + crop_w; 1292 crop.bottom = crop.top + crop_h; 1293 } 1294 Dim rotCrop(crop.left, crop.top, crop_w, crop_h); 1295 rot->setCrop(rotCrop); 1296 } 1297 1298 rot->setFlags(mdpFlags); 1299 rot->setTransform(orient); 1300 rot->setDownscale(downscale); 1301 if(!rot->commit()) return -1; 1302 return 0; 1303} 1304 1305int configMdp(Overlay *ov, const PipeArgs& parg, 1306 const eTransform& orient, const hwc_rect_t& crop, 1307 const hwc_rect_t& pos, const MetaData_t *metadata, 1308 const eDest& dest) { 1309 ov->setSource(parg, dest); 1310 ov->setTransform(orient, dest); 1311 1312 int crop_w = crop.right - crop.left; 1313 int crop_h = crop.bottom - crop.top; 1314 Dim dcrop(crop.left, crop.top, crop_w, crop_h); 1315 ov->setCrop(dcrop, dest); 1316 1317 int posW = pos.right - pos.left; 1318 int posH = pos.bottom - pos.top; 1319 Dim position(pos.left, pos.top, posW, posH); 1320 ov->setPosition(position, dest); 1321 1322 if (metadata) 1323 ov->setVisualParams(*metadata, dest); 1324 1325 if (!ov->commit(dest)) { 1326 return -1; 1327 } 1328 return 0; 1329} 1330 1331void updateSource(eTransform& orient, Whf& whf, 1332 hwc_rect_t& crop) { 1333 Dim srcCrop(crop.left, crop.top, 1334 crop.right - crop.left, 1335 crop.bottom - crop.top); 1336 orient = static_cast<eTransform>(ovutils::getMdpOrient(orient)); 1337 preRotateSource(orient, whf, srcCrop); 1338 if (qdutils::MDPVersion::getInstance().getMDPVersion() >= 1339 qdutils::MDSS_V5) { 1340 // Source for overlay will be the cropped (and rotated) 1341 crop.left = 0; 1342 crop.top = 0; 1343 crop.right = srcCrop.w; 1344 crop.bottom = srcCrop.h; 1345 // Set width & height equal to sourceCrop w & h 1346 whf.w = srcCrop.w; 1347 whf.h = srcCrop.h; 1348 } else { 1349 crop.left = srcCrop.x; 1350 crop.top = srcCrop.y; 1351 crop.right = srcCrop.x + srcCrop.w; 1352 crop.bottom = srcCrop.y + srcCrop.h; 1353 } 1354} 1355 1356int configureNonSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, 1357 const int& dpy, eMdpFlags& mdpFlags, eZorder& z, 1358 eIsFg& isFg, const eDest& dest, Rotator **rot) { 1359 1360 private_handle_t *hnd = (private_handle_t *)layer->handle; 1361 if(!hnd) { 1362 ALOGE("%s: layer handle is NULL", __FUNCTION__); 1363 return -1; 1364 } 1365 1366 MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; 1367 1368 hwc_rect_t crop = layer->sourceCrop; 1369 hwc_rect_t dst = layer->displayFrame; 1370 int transform = layer->transform; 1371 eTransform orient = static_cast<eTransform>(transform); 1372 int downscale = 0; 1373 int rotFlags = ovutils::ROT_FLAGS_NONE; 1374 Whf whf(hnd->width, hnd->height, 1375 getMdpFormat(hnd->format), hnd->size); 1376 1377 if(dpy && isYuvBuffer(hnd)) { 1378 if(!ctx->listStats[dpy].isDisplayAnimating) { 1379 ctx->mPrevCropVideo = crop; 1380 ctx->mPrevDestVideo = dst; 1381 ctx->mPrevTransformVideo = transform; 1382 } else { 1383 // Restore the previous crop, dest rect and transform values, during 1384 // animation to avoid displaying videos at random coordinates. 1385 crop = ctx->mPrevCropVideo; 1386 dst = ctx->mPrevDestVideo; 1387 transform = ctx->mPrevTransformVideo; 1388 orient = static_cast<eTransform>(transform); 1389 //In you tube use case when a device rotated from landscape to 1390 // portrait, set the isFg flag and zOrder to avoid displaying UI on 1391 // hdmi during animation 1392 if(ctx->deviceOrientation) { 1393 isFg = ovutils::IS_FG_SET; 1394 z = ZORDER_1; 1395 } 1396 } 1397 calcExtDisplayPosition(ctx, hnd, dpy, crop, dst, 1398 transform, orient); 1399 } 1400 1401 if(isYuvBuffer(hnd) && ctx->mMDP.version >= qdutils::MDP_V4_2 && 1402 ctx->mMDP.version < qdutils::MDSS_V5) { 1403 downscale = getDownscaleFactor( 1404 crop.right - crop.left, 1405 crop.bottom - crop.top, 1406 dst.right - dst.left, 1407 dst.bottom - dst.top); 1408 if(downscale) { 1409 rotFlags = ROT_DOWNSCALE_ENABLED; 1410 } 1411 } 1412 1413 setMdpFlags(layer, mdpFlags, downscale, transform); 1414 trimLayer(ctx, dpy, transform, crop, dst); 1415 1416 if(isYuvBuffer(hnd) && //if 90 component or downscale, use rot 1417 ((transform & HWC_TRANSFORM_ROT_90) || downscale)) { 1418 *rot = ctx->mRotMgr->getNext(); 1419 if(*rot == NULL) return -1; 1420 BwcPM::setBwc(ctx, crop, dst, transform, mdpFlags); 1421 //Configure rotator for pre-rotation 1422 if(configRotator(*rot, whf, crop, mdpFlags, orient, downscale) < 0) { 1423 ALOGE("%s: configRotator failed!", __FUNCTION__); 1424 ctx->mOverlay->clear(dpy); 1425 return -1; 1426 } 1427 ctx->mLayerRotMap[dpy]->add(layer, *rot); 1428 whf.format = (*rot)->getDstFormat(); 1429 updateSource(orient, whf, crop); 1430 rotFlags |= ovutils::ROT_PREROTATED; 1431 } 1432 1433 //For the mdp, since either we are pre-rotating or MDP does flips 1434 orient = OVERLAY_TRANSFORM_0; 1435 transform = 0; 1436 PipeArgs parg(mdpFlags, whf, z, isFg, 1437 static_cast<eRotFlags>(rotFlags), layer->planeAlpha, 1438 (ovutils::eBlending) getBlending(layer->blending)); 1439 1440 if(configMdp(ctx->mOverlay, parg, orient, crop, dst, metadata, dest) < 0) { 1441 ALOGE("%s: commit failed for low res panel", __FUNCTION__); 1442 return -1; 1443 } 1444 return 0; 1445} 1446 1447//Helper to 1) Ensure crops dont have gaps 2) Ensure L and W are even 1448void sanitizeSourceCrop(hwc_rect_t& cropL, hwc_rect_t& cropR, 1449 private_handle_t *hnd) { 1450 if(cropL.right - cropL.left) { 1451 if(isYuvBuffer(hnd)) { 1452 //Always safe to even down left 1453 ovutils::even_floor(cropL.left); 1454 //If right is even, automatically width is even, since left is 1455 //already even 1456 ovutils::even_floor(cropL.right); 1457 } 1458 //Make sure there are no gaps between left and right splits if the layer 1459 //is spread across BOTH halves 1460 if(cropR.right - cropR.left) { 1461 cropR.left = cropL.right; 1462 } 1463 } 1464 1465 if(cropR.right - cropR.left) { 1466 if(isYuvBuffer(hnd)) { 1467 //Always safe to even down left 1468 ovutils::even_floor(cropR.left); 1469 //If right is even, automatically width is even, since left is 1470 //already even 1471 ovutils::even_floor(cropR.right); 1472 } 1473 } 1474} 1475 1476int configureSplit(hwc_context_t *ctx, hwc_layer_1_t *layer, 1477 const int& dpy, eMdpFlags& mdpFlagsL, eZorder& z, 1478 eIsFg& isFg, const eDest& lDest, const eDest& rDest, 1479 Rotator **rot) { 1480 private_handle_t *hnd = (private_handle_t *)layer->handle; 1481 if(!hnd) { 1482 ALOGE("%s: layer handle is NULL", __FUNCTION__); 1483 return -1; 1484 } 1485 1486 MetaData_t *metadata = (MetaData_t *)hnd->base_metadata; 1487 1488 int hw_w = ctx->dpyAttr[dpy].xres; 1489 int hw_h = ctx->dpyAttr[dpy].yres; 1490 hwc_rect_t crop = layer->sourceCrop; 1491 hwc_rect_t dst = layer->displayFrame; 1492 int transform = layer->transform; 1493 eTransform orient = static_cast<eTransform>(transform); 1494 const int downscale = 0; 1495 int rotFlags = ROT_FLAGS_NONE; 1496 1497 Whf whf(hnd->width, hnd->height, 1498 getMdpFormat(hnd->format), hnd->size); 1499 1500 if(dpy && isYuvBuffer(hnd)) { 1501 if(!ctx->listStats[dpy].isDisplayAnimating) { 1502 ctx->mPrevCropVideo = crop; 1503 ctx->mPrevDestVideo = dst; 1504 ctx->mPrevTransformVideo = transform; 1505 } else { 1506 // Restore the previous crop, dest rect and transform values, during 1507 // animation to avoid displaying videos at random coordinates. 1508 crop = ctx->mPrevCropVideo; 1509 dst = ctx->mPrevDestVideo; 1510 transform = ctx->mPrevTransformVideo; 1511 orient = static_cast<eTransform>(transform); 1512 //In you tube use case when a device rotated from landscape to 1513 // portrait, set the isFg flag and zOrder to avoid displaying UI on 1514 // hdmi during animation 1515 if(ctx->deviceOrientation) { 1516 isFg = ovutils::IS_FG_SET; 1517 z = ZORDER_1; 1518 } 1519 } 1520 } 1521 1522 1523 setMdpFlags(layer, mdpFlagsL, 0, transform); 1524 1525 if(lDest != OV_INVALID && rDest != OV_INVALID) { 1526 //Enable overfetch 1527 setMdpFlags(mdpFlagsL, OV_MDSS_MDP_DUAL_PIPE); 1528 } 1529 1530 trimLayer(ctx, dpy, transform, crop, dst); 1531 1532 //Will do something only if feature enabled and conditions suitable 1533 //hollow call otherwise 1534 if(ctx->mAD->prepare(ctx, crop, whf, hnd)) { 1535 overlay::Writeback *wb = overlay::Writeback::getInstance(); 1536 whf.format = wb->getOutputFormat(); 1537 } 1538 1539 if(isYuvBuffer(hnd) && (transform & HWC_TRANSFORM_ROT_90)) { 1540 (*rot) = ctx->mRotMgr->getNext(); 1541 if((*rot) == NULL) return -1; 1542 //Configure rotator for pre-rotation 1543 if(configRotator(*rot, whf, crop, mdpFlagsL, orient, downscale) < 0) { 1544 ALOGE("%s: configRotator failed!", __FUNCTION__); 1545 ctx->mOverlay->clear(dpy); 1546 return -1; 1547 } 1548 ctx->mLayerRotMap[dpy]->add(layer, *rot); 1549 whf.format = (*rot)->getDstFormat(); 1550 updateSource(orient, whf, crop); 1551 rotFlags |= ROT_PREROTATED; 1552 } 1553 1554 eMdpFlags mdpFlagsR = mdpFlagsL; 1555 setMdpFlags(mdpFlagsR, OV_MDSS_MDP_RIGHT_MIXER); 1556 1557 hwc_rect_t tmp_cropL = {0}, tmp_dstL = {0}; 1558 hwc_rect_t tmp_cropR = {0}, tmp_dstR = {0}; 1559 1560 const int lSplit = getLeftSplit(ctx, dpy); 1561 1562 if(lDest != OV_INVALID) { 1563 tmp_cropL = crop; 1564 tmp_dstL = dst; 1565 hwc_rect_t scissor = {0, 0, lSplit, hw_h }; 1566 qhwc::calculate_crop_rects(tmp_cropL, tmp_dstL, scissor, 0); 1567 } 1568 if(rDest != OV_INVALID) { 1569 tmp_cropR = crop; 1570 tmp_dstR = dst; 1571 hwc_rect_t scissor = {lSplit, 0, hw_w, hw_h }; 1572 qhwc::calculate_crop_rects(tmp_cropR, tmp_dstR, scissor, 0); 1573 } 1574 1575 sanitizeSourceCrop(tmp_cropL, tmp_cropR, hnd); 1576 1577 //When buffer is H-flipped, contents of mixer config also needs to swapped 1578 //Not needed if the layer is confined to one half of the screen. 1579 //If rotator has been used then it has also done the flips, so ignore them. 1580 if((orient & OVERLAY_TRANSFORM_FLIP_H) && lDest != OV_INVALID 1581 && rDest != OV_INVALID && (*rot) == NULL) { 1582 hwc_rect_t new_cropR; 1583 new_cropR.left = tmp_cropL.left; 1584 new_cropR.right = new_cropR.left + (tmp_cropR.right - tmp_cropR.left); 1585 1586 hwc_rect_t new_cropL; 1587 new_cropL.left = new_cropR.right; 1588 new_cropL.right = tmp_cropR.right; 1589 1590 tmp_cropL.left = new_cropL.left; 1591 tmp_cropL.right = new_cropL.right; 1592 1593 tmp_cropR.left = new_cropR.left; 1594 tmp_cropR.right = new_cropR.right; 1595 1596 } 1597 1598 //For the mdp, since either we are pre-rotating or MDP does flips 1599 orient = OVERLAY_TRANSFORM_0; 1600 transform = 0; 1601 1602 //configure left mixer 1603 if(lDest != OV_INVALID) { 1604 PipeArgs pargL(mdpFlagsL, whf, z, isFg, 1605 static_cast<eRotFlags>(rotFlags), layer->planeAlpha, 1606 (ovutils::eBlending) getBlending(layer->blending)); 1607 1608 if(configMdp(ctx->mOverlay, pargL, orient, 1609 tmp_cropL, tmp_dstL, metadata, lDest) < 0) { 1610 ALOGE("%s: commit failed for left mixer config", __FUNCTION__); 1611 return -1; 1612 } 1613 } 1614 1615 //configure right mixer 1616 if(rDest != OV_INVALID) { 1617 PipeArgs pargR(mdpFlagsR, whf, z, isFg, 1618 static_cast<eRotFlags>(rotFlags), 1619 layer->planeAlpha, 1620 (ovutils::eBlending) getBlending(layer->blending)); 1621 tmp_dstR.right = tmp_dstR.right - lSplit; 1622 tmp_dstR.left = tmp_dstR.left - lSplit; 1623 if(configMdp(ctx->mOverlay, pargR, orient, 1624 tmp_cropR, tmp_dstR, metadata, rDest) < 0) { 1625 ALOGE("%s: commit failed for right mixer config", __FUNCTION__); 1626 return -1; 1627 } 1628 } 1629 1630 return 0; 1631} 1632 1633bool canUseRotator(hwc_context_t *ctx, int dpy) { 1634 if(qdutils::MDPVersion::getInstance().is8x26() && 1635 ctx->mVirtualDisplay->isConnected() && 1636 !ctx->dpyAttr[HWC_DISPLAY_VIRTUAL].isPause) { 1637 // Allow if YUV needs rotation and DMA is configured to BLOCK mode for 1638 // primary. For portrait videos usecase on WFD, Driver supports 1639 // multiplexing of DMA pipe in LINE and BLOCK mode. 1640 if(dpy == HWC_DISPLAY_PRIMARY) 1641 return false; 1642 } 1643 if(ctx->mMDP.version == qdutils::MDP_V3_0_4) 1644 return false; 1645 return true; 1646} 1647 1648int getLeftSplit(hwc_context_t *ctx, const int& dpy) { 1649 //Default even split for all displays with high res 1650 int lSplit = ctx->dpyAttr[dpy].xres / 2; 1651 if(dpy == HWC_DISPLAY_PRIMARY && 1652 qdutils::MDPVersion::getInstance().getLeftSplit()) { 1653 //Override if split published by driver for primary 1654 lSplit = qdutils::MDPVersion::getInstance().getLeftSplit(); 1655 } 1656 return lSplit; 1657} 1658 1659bool isDisplaySplit(hwc_context_t* ctx, int dpy) { 1660 if(ctx->dpyAttr[dpy].xres > qdutils::MAX_DISPLAY_DIM) { 1661 return true; 1662 } 1663 //For testing we could split primary via device tree values 1664 if(dpy == HWC_DISPLAY_PRIMARY && 1665 qdutils::MDPVersion::getInstance().getRightSplit()) { 1666 return true; 1667 } 1668 return false; 1669} 1670 1671void BwcPM::setBwc(hwc_context_t *ctx, const hwc_rect_t& crop, 1672 const hwc_rect_t& dst, const int& transform, 1673 ovutils::eMdpFlags& mdpFlags) { 1674 //Target doesnt support Bwc 1675 if(!qdutils::MDPVersion::getInstance().supportsBWC()) { 1676 return; 1677 } 1678 //src width > MAX mixer supported dim 1679 if((crop.right - crop.left) > qdutils::MAX_DISPLAY_DIM) { 1680 return; 1681 } 1682 //External connected 1683 if(ctx->mExtDisplay->isConnected()|| ctx->mVirtualDisplay->isConnected()) { 1684 return; 1685 } 1686 //Decimation necessary, cannot use BWC. H/W requirement. 1687 if(qdutils::MDPVersion::getInstance().supportsDecimation()) { 1688 int src_w = crop.right - crop.left; 1689 int src_h = crop.bottom - crop.top; 1690 int dst_w = dst.right - dst.left; 1691 int dst_h = dst.bottom - dst.top; 1692 if(transform & HAL_TRANSFORM_ROT_90) { 1693 swap(src_w, src_h); 1694 } 1695 float horDscale = 0.0f; 1696 float verDscale = 0.0f; 1697 int horzDeci = 0; 1698 int vertDeci = 0; 1699 ovutils::getDecimationFactor(src_w, src_h, dst_w, dst_h, horDscale, 1700 verDscale); 1701 //TODO Use log2f once math.h has it 1702 if((int)horDscale) 1703 horzDeci = (int)(log(horDscale) / log(2)); 1704 if((int)verDscale) 1705 vertDeci = (int)(log(verDscale) / log(2)); 1706 if(horzDeci || vertDeci) return; 1707 } 1708 //Property 1709 char value[PROPERTY_VALUE_MAX]; 1710 property_get("debug.disable.bwc", value, "0"); 1711 if(atoi(value)) return; 1712 1713 ovutils::setMdpFlags(mdpFlags, ovutils::OV_MDSS_MDP_BWC_EN); 1714} 1715 1716void LayerRotMap::add(hwc_layer_1_t* layer, Rotator *rot) { 1717 if(mCount >= MAX_SESS) return; 1718 mLayer[mCount] = layer; 1719 mRot[mCount] = rot; 1720 mCount++; 1721} 1722 1723void LayerRotMap::reset() { 1724 for (int i = 0; i < MAX_SESS; i++) { 1725 mLayer[i] = 0; 1726 mRot[i] = 0; 1727 } 1728 mCount = 0; 1729} 1730 1731void LayerRotMap::setReleaseFd(const int& fence) { 1732 for(uint32_t i = 0; i < mCount; i++) { 1733 mRot[i]->setReleaseFd(dup(fence)); 1734 } 1735} 1736 1737};//namespace qhwc 1738