linux-gnu/ppc/plt.c

/*
 * This file is part of ltrace.
 * Copyright (C) 2012,2013 Petr Machata, Red Hat Inc.
 * Copyright (C) 2004,2008,2009 Juan Cespedes
 * Copyright (C) 2006 Paul Gilliam
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of the
 * License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 */

#include <gelf.h>
#include <sys/ptrace.h>
#include <errno.h>
#include <inttypes.h>
#include <assert.h>
#include <string.h>

#include "proc.h"
#include "common.h"
#include "insn.h"
#include "library.h"
#include "breakpoint.h"
#include "linux-gnu/trace.h"
#include "backend.h"

/* There are two PLT types on 32-bit PPC: old-style, BSS PLT, and
 * new-style "secure" PLT.  We can tell one from the other by the
 * flags on the .plt section.  If it's +X (executable), it's BSS PLT,
 * otherwise it's secure.
 *
 * BSS PLT works the same way as most architectures: the .plt section
 * contains trampolines and we put breakpoints to those.  If not
 * prelinked, .plt contains zeroes, and dynamic linker fills in the
 * initial set of trampolines, which means that we need to delay
 * enabling breakpoints until after binary entry point is hit.
 * Additionally, after first call, dynamic linker updates .plt with
 * branch to resolved address.  That means that on first hit, we must
 * do something similar to the PPC64 gambit described below.
 *
 * With secure PLT, the .plt section doesn't contain instructions but
 * addresses.  The real PLT table is stored in .text.  Addresses of
 * those PLT entries can be computed, and apart from the fact that
 * they are in .text, they are ordinary PLT entries.
 *
 * 64-bit PPC is more involved.  Program linker creates for each
 * library call a _stub_ symbol named xxxxxxxx.plt_call.<callee>
 * (where xxxxxxxx is a hexadecimal number).  That stub does the call
 * dispatch: it loads an address of a function to call from the
 * section .plt, and branches.  PLT entries themselves are essentially
 * a curried call to the resolver.  When the symbol is resolved, the
 * resolver updates the value stored in .plt, and the next time
 * around, the stub calls the library function directly.  So we make
 * at most one trip (none if the binary is prelinked) through each PLT
 * entry, and correspondingly that is useless as a breakpoint site.
 *
 * Note the three confusing terms: stubs (that play the role of PLT
 * entries), PLT entries, .plt section.
 *
 * We first check symbol tables and see if we happen to have stub
 * symbols available.  If yes we just put breakpoints to those, and
 * treat them as usual breakpoints.  The only tricky part is realizing
 * that there can be more than one breakpoint per symbol.
 *
 * The case that we don't have the stub symbols available is harder.
 * The following scheme uses two kinds of PLT breakpoints: unresolved
 * and resolved (to some address).  When the process starts (or when
 * we attach), we distribute unresolved PLT breakpoints to the PLT
 * entries (not stubs).  Then we look in .plt, and for each entry
 * whose value is different than the corresponding PLT entry address,
 * we assume it was already resolved, and convert the breakpoint to
 * resolved.  We also rewrite the resolved value in .plt back to the
 * PLT address.
 *
 * When a PLT entry hits a resolved breakpoint (which happens because
 * we rewrite .plt with the original unresolved addresses), we move
 * the instruction pointer to the corresponding address and continue
 * the process as if nothing happened.
 *
 * When unresolved PLT entry is called for the first time, we need to
 * catch the new value that the resolver will write to a .plt slot.
 * We also need to prevent another thread from racing through and
 * taking the branch without ltrace noticing.  So when unresolved PLT
 * entry hits, we have to stop all threads.  We then single-step
 * through the resolver, until the .plt slot changes.  When it does,
 * we treat it the same way as above: convert the PLT breakpoint to
 * resolved, and rewrite the .plt value back to PLT address.  We then
 * start all threads again.
 *
 * As an optimization, we remember the address where the address was
 * resolved, and put a breakpoint there.  The next time around (when
 * the next PLT entry is to be resolved), instead of single-stepping
 * through half the dynamic linker, we just let the thread run and hit
 * this breakpoint.  When it hits, we know the PLT entry was resolved.
 *
 * XXX TODO If we have hardware watch point, we might put a read watch
 * on .plt slot, and discover the offenders this way.  I don't know
 * the details, but I assume at most a handful (like, one or two, if
 * available at all) addresses may be watched at a time, and thus this
 * would be used as an amendment of the above rather than full-on
 * solution to PLT tracing on PPC.
 */

#define PPC_PLT_STUB_SIZE 16
#define PPC64_PLT_STUB_SIZE 8 //xxx

static inline int
host_powerpc64()
{
#ifdef __powerpc64__
	return 1;
#else
	return 0;
#endif
}

static void
mark_as_resolved(struct library_symbol *libsym, GElf_Addr value)
{
	libsym->arch.type = PPC_PLT_RESOLVED;
	libsym->arch.resolved_value = value;
}

void
arch_dynlink_done(struct process *proc)
{
	/* On PPC32 with BSS PLT, we need to enable delayed symbols.  */
	struct library_symbol *libsym = NULL;
	while ((libsym = proc_each_symbol(proc, libsym,
					  library_symbol_delayed_cb, NULL))) {
		if (proc_read_64(proc, libsym->enter_addr,
				 &libsym->arch.resolved_value) < 0) {
			fprintf(stderr,
				"couldn't read PLT value for %s(%p): %s\n",
				libsym->name, libsym->enter_addr,
				strerror(errno));
			return;
		}

		/* arch_dynlink_done is called on attach as well.  In
		 * that case some slots will have been resolved
		 * already.  Unresolved PLT looks like this:
		 *
		 *    <sleep@plt>:	li      r11,0
		 *    <sleep@plt+4>:	b       "resolve"
		 *
		 * "resolve" is another address in PLTGOT (the same
		 * block that all the PLT slots are it).  When
		 * resolved, it looks either this way:
		 *
		 *    <sleep@plt>:	b       0xfea88d0 <sleep>
		 *
		 * Which is easy to detect.  It can also look this
		 * way:
		 *
		 *    <sleep@plt>:	li      r11,0
		 *    <sleep@plt+4>:	b       "dispatch"
		 *
		 * The "dispatch" address lies in PLTGOT as well.  In
		 * current GNU toolchain, "dispatch" address is the
		 * same as PLTGOT address.  We rely on this to figure
		 * out whether the address is resolved or not.  */
		uint32_t insn1 = libsym->arch.resolved_value >> 32;
		uint32_t insn2 = (uint32_t)libsym->arch.resolved_value;
		if ((insn1 & BRANCH_MASK) == B_INSN
		    || ((insn2 & BRANCH_MASK) == B_INSN
			/* XXX double cast  */
			&& (ppc_branch_dest(libsym->enter_addr + 4, insn2)
			    == (void*)(long)libsym->lib->arch.pltgot_addr)))
			mark_as_resolved(libsym, libsym->arch.resolved_value);

		if (proc_activate_delayed_symbol(proc, libsym) < 0)
			return;

		/* XXX double cast  */
		libsym->arch.plt_slot_addr
			= (GElf_Addr)(uintptr_t)libsym->enter_addr;
	}
}

GElf_Addr
arch_plt_sym_val(struct ltelf *lte, size_t ndx, GElf_Rela *rela)
{
	if (lte->ehdr.e_machine == EM_PPC && lte->arch.secure_plt) {
		assert(lte->arch.plt_stub_vma != 0);
		return lte->arch.plt_stub_vma + PPC_PLT_STUB_SIZE * ndx;

	} else if (lte->ehdr.e_machine == EM_PPC) {
		return rela->r_offset;

	} else {
		/* If we get here, we don't have stub symbols.  In
		 * that case we put brakpoints to PLT entries the same
		 * as the PPC32 secure PLT case does.  */
		assert(lte->arch.plt_stub_vma != 0);
		return lte->arch.plt_stub_vma + PPC64_PLT_STUB_SIZE * ndx;
	}
}

/* This entry point is called when ltelf is not available
 * anymore--during runtime.  At that point we don't have to concern
 * ourselves with bias, as the values in OPD have been resolved
 * already.  */
int
arch_translate_address_dyn(struct process *proc,
			   arch_addr_t addr, arch_addr_t *ret)
{
	if (proc->e_machine == EM_PPC64) {
		uint64_t value;
		if (proc_read_64(proc, addr, &value) < 0) {
			fprintf(stderr,
				"dynamic .opd translation of %p: %s\n",
				addr, strerror(errno));
			return -1;
		}
		/* XXX The double cast should be removed when
		 * arch_addr_t becomes integral type.  */
		*ret = (arch_addr_t)(uintptr_t)value;
		return 0;
	}

	*ret = addr;
	return 0;
}

int
arch_translate_address(struct ltelf *lte,
		       arch_addr_t addr, arch_addr_t *ret)
{
	if (lte->ehdr.e_machine == EM_PPC64) {
		/* XXX The double cast should be removed when
		 * arch_addr_t becomes integral type.  */
		GElf_Xword offset
			= (GElf_Addr)(uintptr_t)addr - lte->arch.opd_base;
		uint64_t value;
		if (elf_read_u64(lte->arch.opd_data, offset, &value) < 0) {
			fprintf(stderr, "static .opd translation of %p: %s\n",
				addr, elf_errmsg(-1));
			return -1;
		}
		*ret = (arch_addr_t)(uintptr_t)(value + lte->bias);
		return 0;
	}

	*ret = addr;
	return 0;
}

static int
load_opd_data(struct ltelf *lte, struct library *lib)
{
	Elf_Scn *sec;
	GElf_Shdr shdr;
	if (elf_get_section_named(lte, ".opd", &sec, &shdr) < 0
	    || sec == NULL) {
	fail:
		fprintf(stderr, "couldn't find .opd data\n");
		return -1;
	}

	lte->arch.opd_data = elf_rawdata(sec, NULL);
	if (lte->arch.opd_data == NULL)
		goto fail;

	lte->arch.opd_base = shdr.sh_addr + lte->bias;
	lte->arch.opd_size = shdr.sh_size;

	return 0;
}

void *
sym2addr(struct process *proc, struct library_symbol *sym)
{
	return sym->enter_addr;
}

static GElf_Addr
get_glink_vma(struct ltelf *lte, GElf_Addr ppcgot, Elf_Data *plt_data)
{
	Elf_Scn *ppcgot_sec = NULL;
	GElf_Shdr ppcgot_shdr;
	if (ppcgot != 0
	    && (elf_get_section_covering(lte, ppcgot,
					 &ppcgot_sec, &ppcgot_shdr) < 0
		|| ppcgot_sec == NULL))
		fprintf(stderr,
			"DT_PPC_GOT=%#"PRIx64", but no such section found\n",
			ppcgot);

	if (ppcgot_sec != NULL) {
		Elf_Data *data = elf_loaddata(ppcgot_sec, &ppcgot_shdr);
		if (data == NULL || data->d_size < 8 ) {
			fprintf(stderr, "couldn't read GOT data\n");
		} else {
			// where PPCGOT begins in .got
			size_t offset = ppcgot - ppcgot_shdr.sh_addr;
			assert(offset % 4 == 0);
			uint32_t glink_vma;
			if (elf_read_u32(data, offset + 4, &glink_vma) < 0) {
				fprintf(stderr, "couldn't read glink VMA"
					" address at %zd@GOT\n", offset);
				return 0;
			}
			if (glink_vma != 0) {
				debug(1, "PPC GOT glink_vma address: %#" PRIx32,
				      glink_vma);
				return (GElf_Addr)glink_vma;
			}
		}
	}

	if (plt_data != NULL) {
		uint32_t glink_vma;
		if (elf_read_u32(plt_data, 0, &glink_vma) < 0) {
			fprintf(stderr, "couldn't read glink VMA address\n");
			return 0;
		}
		debug(1, ".plt glink_vma address: %#" PRIx32, glink_vma);
		return (GElf_Addr)glink_vma;
	}

	return 0;
}

static int
load_dynamic_entry(struct ltelf *lte, int tag, GElf_Addr *valuep)
{
	Elf_Scn *scn;
	GElf_Shdr shdr;
	if (elf_get_section_type(lte, SHT_DYNAMIC, &scn, &shdr) < 0
	    || scn == NULL) {
	fail:
		fprintf(stderr, "Couldn't get SHT_DYNAMIC: %s\n",
			elf_errmsg(-1));
		return -1;
	}

	Elf_Data *data = elf_loaddata(scn, &shdr);
	if (data == NULL)
		goto fail;

	size_t j;
	for (j = 0; j < shdr.sh_size / shdr.sh_entsize; ++j) {
		GElf_Dyn dyn;
		if (gelf_getdyn(data, j, &dyn) == NULL)
			goto fail;

		if(dyn.d_tag == tag) {
			*valuep = dyn.d_un.d_ptr;
			return 0;
		}
	}

	return -1;
}

static int
nonzero_data(Elf_Data *data)
{
	/* We are not supposed to get here if there's no PLT.  */
	assert(data != NULL);

	unsigned char *buf = data->d_buf;
	if (buf == NULL)
		return 0;

	size_t i;
	for (i = 0; i < data->d_size; ++i)
		if (buf[i] != 0)
			return 1;
	return 0;
}

int
arch_elf_init(struct ltelf *lte, struct library *lib)
{
	if (lte->ehdr.e_machine == EM_PPC64
	    && load_opd_data(lte, lib) < 0)
		return -1;

	lte->arch.secure_plt = !(lte->plt_flags & SHF_EXECINSTR);

	/* For PPC32 BSS, it is important whether the binary was
	 * prelinked.  If .plt section is NODATA, or if it contains
	 * zeroes, then this library is not prelinked, and we need to
	 * delay breakpoints.  */
	if (lte->ehdr.e_machine == EM_PPC && !lte->arch.secure_plt)
		lib->arch.bss_plt_prelinked = nonzero_data(lte->plt_data);
	else
		/* For cases where it's irrelevant, initialize the
		 * value to something conspicuous.  */
		lib->arch.bss_plt_prelinked = -1;

	if (lte->ehdr.e_machine == EM_PPC && lte->arch.secure_plt) {
		GElf_Addr ppcgot;
		if (load_dynamic_entry(lte, DT_PPC_GOT, &ppcgot) < 0) {
			fprintf(stderr, "couldn't find DT_PPC_GOT\n");
			return -1;
		}
		GElf_Addr glink_vma = get_glink_vma(lte, ppcgot, lte->plt_data);

		assert(lte->relplt_size % 12 == 0);
		size_t count = lte->relplt_size / 12; // size of RELA entry
		lte->arch.plt_stub_vma = glink_vma
			- (GElf_Addr)count * PPC_PLT_STUB_SIZE;
		debug(1, "stub_vma is %#" PRIx64, lte->arch.plt_stub_vma);

	} else if (lte->ehdr.e_machine == EM_PPC64) {
		GElf_Addr glink_vma;
		if (load_dynamic_entry(lte, DT_PPC64_GLINK, &glink_vma) < 0) {
			fprintf(stderr, "couldn't find DT_PPC64_GLINK\n");
			return -1;
		}

		/* The first glink stub starts at offset 32.  */
		lte->arch.plt_stub_vma = glink_vma + 32;

	} else {
		/* By exhaustion--PPC32 BSS.  */
		if (load_dynamic_entry(lte, DT_PLTGOT,
				       &lib->arch.pltgot_addr) < 0) {
			fprintf(stderr, "couldn't find DT_PLTGOT\n");
			return -1;
		}
	}

	/* On PPC64, look for stub symbols in symbol table.  These are
	 * called: xxxxxxxx.plt_call.callee_name@version+addend.  */
	if (lte->ehdr.e_machine == EM_PPC64
	    && lte->symtab != NULL && lte->strtab != NULL) {

		/* N.B. We can't simply skip the symbols that we fail
		 * to read or malloc.  There may be more than one stub
		 * per symbol name, and if we failed in one but
		 * succeeded in another, the PLT enabling code would
		 * have no way to tell that something is missing.  We
		 * could work around that, of course, but it doesn't
		 * seem worth the trouble.  So if anything fails, we
		 * just pretend that we don't have stub symbols at
		 * all, as if the binary is stripped.  */

		size_t i;
		for (i = 0; i < lte->symtab_count; ++i) {
			GElf_Sym sym;
			if (gelf_getsym(lte->symtab, i, &sym) == NULL) {
				struct library_symbol *sym, *next;
			fail:
				for (sym = lte->arch.stubs; sym != NULL; ) {
					next = sym->next;
					library_symbol_destroy(sym);
					free(sym);
					sym = next;
				}
				lte->arch.stubs = NULL;
				break;
			}

			const char *name = lte->strtab + sym.st_name;

#define STUBN ".plt_call."
			if ((name = strstr(name, STUBN)) == NULL)
				continue;
			name += sizeof(STUBN) - 1;
#undef STUBN

			size_t len;
			const char *ver = strchr(name, '@');
			if (ver != NULL) {
				len = ver - name;

			} else {
				/* If there is "+" at all, check that
				 * the symbol name ends in "+0".  */
				const char *add = strrchr(name, '+');
				if (add != NULL) {
					assert(strcmp(add, "+0") == 0);
					len = add - name;
				} else {
					len = strlen(name);
				}
			}

			char *sym_name = strndup(name, len);
			struct library_symbol *libsym = malloc(sizeof(*libsym));
			if (sym_name == NULL || libsym == NULL) {
			fail2:
				free(sym_name);
				free(libsym);
				goto fail;
			}

			/* XXX The double cast should be removed when
			 * arch_addr_t becomes integral type.  */
			arch_addr_t addr = (arch_addr_t)
				(uintptr_t)sym.st_value + lte->bias;
			if (library_symbol_init(libsym, addr, sym_name, 1,
						LS_TOPLT_EXEC) < 0)
				goto fail2;
			libsym->arch.type = PPC64_PLT_STUB;
			libsym->next = lte->arch.stubs;
			lte->arch.stubs = libsym;
		}
	}

	return 0;
}

static int
read_plt_slot_value(struct process *proc, GElf_Addr addr, GElf_Addr *valp)
{
	/* On PPC64, we read from .plt, which contains 8 byte
	 * addresses.  On PPC32 we read from .plt, which contains 4
	 * byte instructions, but the PLT is two instructions, and
	 * either can change.  */
	uint64_t l;
	/* XXX double cast.  */
	if (proc_read_64(proc, (arch_addr_t)(uintptr_t)addr, &l) < 0) {
		fprintf(stderr, "ptrace .plt slot value @%#" PRIx64": %s\n",
			addr, strerror(errno));
		return -1;
	}

	*valp = (GElf_Addr)l;
	return 0;
}

static int
unresolve_plt_slot(struct process *proc, GElf_Addr addr, GElf_Addr value)
{
	/* We only modify plt_entry[0], which holds the resolved
	 * address of the routine.  We keep the TOC and environment
	 * pointers intact.  Hence the only adjustment that we need to
	 * do is to IP.  */
	if (ptrace(PTRACE_POKETEXT, proc->pid, addr, value) < 0) {
		fprintf(stderr, "failed to unresolve .plt slot: %s\n",
			strerror(errno));
		return -1;
	}
	return 0;
}

enum plt_status
arch_elf_add_plt_entry(struct process *proc, struct ltelf *lte,
		       const char *a_name, GElf_Rela *rela, size_t ndx,
		       struct library_symbol **ret)
{
	if (lte->ehdr.e_machine == EM_PPC) {
		if (lte->arch.secure_plt)
			return PLT_DEFAULT;

		struct library_symbol *libsym = NULL;
		if (default_elf_add_plt_entry(proc, lte, a_name, rela, ndx,
					      &libsym) < 0)
			return PLT_FAIL;

		/* On PPC32 with BSS PLT, delay the symbol until
		 * dynamic linker is done.  */
		assert(!libsym->delayed);
		libsym->delayed = 1;

		*ret = libsym;
		return PLT_OK;
	}

	/* PPC64.  If we have stubs, we return a chain of breakpoint
	 * sites, one for each stub that corresponds to this PLT
	 * entry.  */
	struct library_symbol *chain = NULL;
	struct library_symbol **symp;
	for (symp = &lte->arch.stubs; *symp != NULL; ) {
		struct library_symbol *sym = *symp;
		if (strcmp(sym->name, a_name) != 0) {
			symp = &(*symp)->next;
			continue;
		}

		/* Re-chain the symbol from stubs to CHAIN.  */
		*symp = sym->next;
		sym->next = chain;
		chain = sym;
	}

	if (chain != NULL) {
		*ret = chain;
		return PLT_OK;
	}

	/* We don't have stub symbols.  Find corresponding .plt slot,
	 * and check whether it contains the corresponding PLT address
	 * (or 0 if the dynamic linker hasn't run yet).  N.B. we don't
	 * want read this from ELF file, but from process image.  That
	 * makes a difference if we are attaching to a running
	 * process.  */

	GElf_Addr plt_entry_addr = arch_plt_sym_val(lte, ndx, rela);
	GElf_Addr plt_slot_addr = rela->r_offset;
	assert(plt_slot_addr >= lte->plt_addr
	       || plt_slot_addr < lte->plt_addr + lte->plt_size);

	GElf_Addr plt_slot_value;
	if (read_plt_slot_value(proc, plt_slot_addr, &plt_slot_value) < 0)
		return PLT_FAIL;

	char *name = strdup(a_name);
	struct library_symbol *libsym = malloc(sizeof(*libsym));
	if (name == NULL || libsym == NULL) {
		fprintf(stderr, "allocation for .plt slot: %s\n",
			strerror(errno));
	fail:
		free(name);
		free(libsym);
		return PLT_FAIL;
	}

	/* XXX The double cast should be removed when
	 * arch_addr_t becomes integral type.  */
	if (library_symbol_init(libsym,
				(arch_addr_t)(uintptr_t)plt_entry_addr,
				name, 1, LS_TOPLT_EXEC) < 0)
		goto fail;
	libsym->arch.plt_slot_addr = plt_slot_addr;

	if (plt_slot_value == plt_entry_addr || plt_slot_value == 0) {
		libsym->arch.type = PPC_PLT_UNRESOLVED;
		libsym->arch.resolved_value = plt_entry_addr;

	} else {
		/* Unresolve the .plt slot.  If the binary was
		 * prelinked, this makes the code invalid, because in
		 * case of prelinked binary, the dynamic linker
		 * doesn't update .plt[0] and .plt[1] with addresses
		 * of the resover.  But we don't care, we will never
		 * need to enter the resolver.  That just means that
		 * we have to un-un-resolve this back before we
		 * detach.  */

		if (unresolve_plt_slot(proc, plt_slot_addr, plt_entry_addr) < 0) {
			library_symbol_destroy(libsym);
			goto fail;
		}
		mark_as_resolved(libsym, plt_slot_value);
	}

	*ret = libsym;
	return PLT_OK;
}

void
arch_elf_destroy(struct ltelf *lte)
{
	struct library_symbol *sym;
	for (sym = lte->arch.stubs; sym != NULL; ) {
		struct library_symbol *next = sym->next;
		library_symbol_destroy(sym);
		free(sym);
		sym = next;
	}
}

static void
dl_plt_update_bp_on_hit(struct breakpoint *bp, struct process *proc)
{
	debug(DEBUG_PROCESS, "pid=%d dl_plt_update_bp_on_hit %s(%p)",
	      proc->pid, breakpoint_name(bp), bp->addr);
	struct process_stopping_handler *self = proc->arch.handler;
	assert(self != NULL);

	struct library_symbol *libsym = self->breakpoint_being_enabled->libsym;
	GElf_Addr value;
	if (read_plt_slot_value(proc, libsym->arch.plt_slot_addr, &value) < 0)
		return;

	/* On PPC64, we rewrite the slot value.  */
	if (proc->e_machine == EM_PPC64)
		unresolve_plt_slot(proc, libsym->arch.plt_slot_addr,
				   libsym->arch.resolved_value);
	/* We mark the breakpoint as resolved on both arches.  */
	mark_as_resolved(libsym, value);

	/* cb_on_all_stopped looks if HANDLER is set to NULL as a way
	 * to check that this was run.  It's an error if it
	 * wasn't.  */
	proc->arch.handler = NULL;

	breakpoint_turn_off(bp, proc);
}

static void
cb_on_all_stopped(struct process_stopping_handler *self)
{
	/* Put that in for dl_plt_update_bp_on_hit to see.  */
	assert(self->task_enabling_breakpoint->arch.handler == NULL);
	self->task_enabling_breakpoint->arch.handler = self;

	linux_ptrace_disable_and_continue(self);
}

static enum callback_status
cb_keep_stepping_p(struct process_stopping_handler *self)
{
	struct process *proc = self->task_enabling_breakpoint;
	struct library_symbol *libsym = self->breakpoint_being_enabled->libsym;

	GElf_Addr value;
	if (read_plt_slot_value(proc, libsym->arch.plt_slot_addr, &value) < 0)
		return CBS_FAIL;

	/* In UNRESOLVED state, the RESOLVED_VALUE in fact contains
	 * the PLT entry value.  */
	if (value == libsym->arch.resolved_value)
		return CBS_CONT;

	debug(DEBUG_PROCESS, "pid=%d PLT got resolved to value %#"PRIx64,
	      proc->pid, value);

	/* The .plt slot got resolved!  We can migrate the breakpoint
	 * to RESOLVED and stop single-stepping.  */
	if (proc->e_machine == EM_PPC64
	    && unresolve_plt_slot(proc, libsym->arch.plt_slot_addr,
				  libsym->arch.resolved_value) < 0)
		return CBS_FAIL;

	/* Resolving on PPC64 consists of overwriting a doubleword in
	 * .plt.  That doubleword is than read back by a stub, and
	 * jumped on.  Hopefully we can assume that double word update
	 * is done on a single place only, as it contains a final
	 * address.  We still need to look around for any sync
	 * instruction, but essentially it is safe to optimize away
	 * the single stepping next time and install a post-update
	 * breakpoint.
	 *
	 * The situation on PPC32 BSS is more complicated.  The
	 * dynamic linker here updates potentially several
	 * instructions (XXX currently we assume two) and the rules
	 * are more complicated.  Sometimes it's enough to adjust just
	 * one of the addresses--the logic for generating optimal
	 * dispatch depends on relative addresses of the .plt entry
	 * and the jump destination.  We can't assume that the some
	 * instruction block does the update every time.  So on PPC32,
	 * we turn the optimization off and just step through it each
	 * time.  */
	if (proc->e_machine == EM_PPC)
		goto done;

	/* Install breakpoint to the address where the change takes
	 * place.  If we fail, then that just means that we'll have to
	 * singlestep the next time around as well.  */
	struct process *leader = proc->leader;
	if (leader == NULL || leader->arch.dl_plt_update_bp != NULL)
		goto done;

	/* We need to install to the next instruction.  ADDR points to
	 * a store instruction, so moving the breakpoint one
	 * instruction forward is safe.  */
	arch_addr_t addr = get_instruction_pointer(proc) + 4;
	leader->arch.dl_plt_update_bp = insert_breakpoint(proc, addr, NULL);
	if (leader->arch.dl_plt_update_bp == NULL)
		goto done;

	static struct bp_callbacks dl_plt_update_cbs = {
		.on_hit = dl_plt_update_bp_on_hit,
	};
	leader->arch.dl_plt_update_bp->cbs = &dl_plt_update_cbs;

	/* Turn it off for now.  We will turn it on again when we hit
	 * the PLT entry that needs this.  */
	breakpoint_turn_off(leader->arch.dl_plt_update_bp, proc);

done:
	mark_as_resolved(libsym, value);

	return CBS_STOP;
}

static void
jump_to_entry_point(struct process *proc, struct breakpoint *bp)
{
	/* XXX The double cast should be removed when
	 * arch_addr_t becomes integral type.  */
	arch_addr_t rv = (arch_addr_t)
		(uintptr_t)bp->libsym->arch.resolved_value;
	set_instruction_pointer(proc, rv);
}

static void
ppc_plt_bp_continue(struct breakpoint *bp, struct process *proc)
{
	switch (bp->libsym->arch.type) {
		struct process *leader;
		void (*on_all_stopped)(struct process_stopping_handler *);
		enum callback_status (*keep_stepping_p)
			(struct process_stopping_handler *);

	case PPC_DEFAULT:
		assert(proc->e_machine == EM_PPC);
		assert(bp->libsym != NULL);
		assert(bp->libsym->lib->arch.bss_plt_prelinked == 0);
		/* Fall through.  */

	case PPC_PLT_UNRESOLVED:
		on_all_stopped = NULL;
		keep_stepping_p = NULL;
		leader = proc->leader;

		if (leader != NULL && leader->arch.dl_plt_update_bp != NULL
		    && breakpoint_turn_on(leader->arch.dl_plt_update_bp,
					  proc) >= 0)
			on_all_stopped = cb_on_all_stopped;
		else
			keep_stepping_p = cb_keep_stepping_p;

		if (process_install_stopping_handler
		    (proc, bp, on_all_stopped, keep_stepping_p, NULL) < 0) {
			fprintf(stderr,	"ppc_plt_bp_continue: "
				"couldn't install event handler\n");
			continue_after_breakpoint(proc, bp);
		}
		return;

	case PPC_PLT_RESOLVED:
		if (proc->e_machine == EM_PPC) {
			continue_after_breakpoint(proc, bp);
			return;
		}

		jump_to_entry_point(proc, bp);
		continue_process(proc->pid);
		return;

	case PPC64_PLT_STUB:
		/* These should never hit here.  */
		break;
	}

	assert(bp->libsym->arch.type != bp->libsym->arch.type);
	abort();
}

/* When a process is in a PLT stub, it may have already read the data
 * in .plt that we changed.  If we detach now, it will jump to PLT
 * entry and continue to the dynamic linker, where it will SIGSEGV,
 * because zeroth .plt slot is not filled in prelinked binaries, and
 * the dynamic linker needs that data.  Moreover, the process may
 * actually have hit the breakpoint already.  This functions tries to
 * detect both cases and do any fix-ups necessary to mend this
 * situation.  */
static enum callback_status
detach_task_cb(struct process *task, void *data)
{
	struct breakpoint *bp = data;

	if (get_instruction_pointer(task) == bp->addr) {
		debug(DEBUG_PROCESS, "%d at %p, which is PLT slot",
		      task->pid, bp->addr);
		jump_to_entry_point(task, bp);
		return CBS_CONT;
	}

	/* XXX There's still a window of several instructions where we
	 * might catch the task inside a stub such that it has already
	 * read destination address from .plt, but hasn't jumped yet,
	 * thus avoiding the breakpoint.  */

	return CBS_CONT;
}

static void
ppc_plt_bp_retract(struct breakpoint *bp, struct process *proc)
{
	/* On PPC64, we rewrite .plt with PLT entry addresses.  This
	 * needs to be undone.  Unfortunately, the program may have
	 * made decisions based on that value */
	if (proc->e_machine == EM_PPC64
	    && bp->libsym != NULL
	    && bp->libsym->arch.type == PPC_PLT_RESOLVED) {
		each_task(proc->leader, NULL, detach_task_cb, bp);
		unresolve_plt_slot(proc, bp->libsym->arch.plt_slot_addr,
				   bp->libsym->arch.resolved_value);
	}
}

void
arch_library_init(struct library *lib)
{
}

void
arch_library_destroy(struct library *lib)
{
}

void
arch_library_clone(struct library *retp, struct library *lib)
{
}

int
arch_library_symbol_init(struct library_symbol *libsym)
{
	/* We set type explicitly in the code above, where we have the
	 * necessary context.  This is for calls from ltrace-elf.c and
	 * such.  */
	libsym->arch.type = PPC_DEFAULT;
	return 0;
}

void
arch_library_symbol_destroy(struct library_symbol *libsym)
{
}

int
arch_library_symbol_clone(struct library_symbol *retp,
			  struct library_symbol *libsym)
{
	retp->arch = libsym->arch;
	return 0;
}

/* For some symbol types, we need to set up custom callbacks.  XXX we
 * don't need PROC here, we can store the data in BP if it is of
 * interest to us.  */
int
arch_breakpoint_init(struct process *proc, struct breakpoint *bp)
{
	/* Artificial and entry-point breakpoints are plain.  */
	if (bp->libsym == NULL || bp->libsym->plt_type != LS_TOPLT_EXEC)
		return 0;

	/* On PPC, secure PLT and prelinked BSS PLT are plain.  */
	if (proc->e_machine == EM_PPC
	    && bp->libsym->lib->arch.bss_plt_prelinked != 0)
		return 0;

	/* On PPC64, stub PLT breakpoints are plain.  */
	if (proc->e_machine == EM_PPC64
	    && bp->libsym->arch.type == PPC64_PLT_STUB)
		return 0;

	static struct bp_callbacks cbs = {
		.on_continue = ppc_plt_bp_continue,
		.on_retract = ppc_plt_bp_retract,
	};
	breakpoint_set_callbacks(bp, &cbs);
	return 0;
}

void
arch_breakpoint_destroy(struct breakpoint *bp)
{
}

int
arch_breakpoint_clone(struct breakpoint *retp, struct breakpoint *sbp)
{
	retp->arch = sbp->arch;
	return 0;
}

int
arch_process_init(struct process *proc)
{
	proc->arch.dl_plt_update_bp = NULL;
	proc->arch.handler = NULL;
	return 0;
}

void
arch_process_destroy(struct process *proc)
{
}

int
arch_process_clone(struct process *retp, struct process *proc)
{
	retp->arch = proc->arch;
	return 0;
}

int
arch_process_exec(struct process *proc)
{
	return arch_process_init(proc);
}