1/* 2 * tty.c - code for handling serial ports in pppd. 3 * 4 * Copyright (C) 2000-2004 Paul Mackerras. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 13 * 2. The name(s) of the authors of this software must not be used to 14 * endorse or promote products derived from this software without 15 * prior written permission. 16 * 17 * 3. Redistributions of any form whatsoever must retain the following 18 * acknowledgment: 19 * "This product includes software developed by Paul Mackerras 20 * <paulus@samba.org>". 21 * 22 * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO 23 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 24 * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY 25 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 26 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 27 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 28 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 29 * 30 * Portions derived from main.c, which is: 31 * 32 * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. 33 * 34 * Redistribution and use in source and binary forms, with or without 35 * modification, are permitted provided that the following conditions 36 * are met: 37 * 38 * 1. Redistributions of source code must retain the above copyright 39 * notice, this list of conditions and the following disclaimer. 40 * 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in 43 * the documentation and/or other materials provided with the 44 * distribution. 45 * 46 * 3. The name "Carnegie Mellon University" must not be used to 47 * endorse or promote products derived from this software without 48 * prior written permission. For permission or any legal 49 * details, please contact 50 * Office of Technology Transfer 51 * Carnegie Mellon University 52 * 5000 Forbes Avenue 53 * Pittsburgh, PA 15213-3890 54 * (412) 268-4387, fax: (412) 268-7395 55 * tech-transfer@andrew.cmu.edu 56 * 57 * 4. Redistributions of any form whatsoever must retain the following 58 * acknowledgment: 59 * "This product includes software developed by Computing Services 60 * at Carnegie Mellon University (http://www.cmu.edu/computing/)." 61 * 62 * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO 63 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 64 * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE 65 * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 66 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 67 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 68 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 69 */ 70 71#define RCSID "$Id: tty.c,v 1.27 2008/07/01 12:27:56 paulus Exp $" 72 73#include <stdio.h> 74#include <ctype.h> 75#include <stdlib.h> 76#include <string.h> 77#include <termios.h> 78#include <unistd.h> 79#include <signal.h> 80#include <errno.h> 81#include <fcntl.h> 82#include <syslog.h> 83#include <netdb.h> 84#include <utmp.h> 85#include <pwd.h> 86#include <setjmp.h> 87#include <sys/param.h> 88#include <sys/types.h> 89#include <sys/wait.h> 90#include <sys/time.h> 91#include <sys/resource.h> 92#include <sys/stat.h> 93#include <sys/socket.h> 94#include <netinet/in.h> 95#include <arpa/inet.h> 96 97#include "pppd.h" 98#include "fsm.h" 99#include "lcp.h" 100 101void tty_process_extra_options __P((void)); 102void tty_check_options __P((void)); 103int connect_tty __P((void)); 104void disconnect_tty __P((void)); 105void tty_close_fds __P((void)); 106void cleanup_tty __P((void)); 107void tty_do_send_config __P((int, u_int32_t, int, int)); 108 109static int setdevname __P((char *, char **, int)); 110static int setspeed __P((char *, char **, int)); 111static int setxonxoff __P((char **)); 112static int setescape __P((char **)); 113static void printescape __P((option_t *, void (*)(void *, char *,...),void *)); 114static void finish_tty __P((void)); 115static int start_charshunt __P((int, int)); 116static void stop_charshunt __P((void *, int)); 117static void charshunt_done __P((void *)); 118static void charshunt __P((int, int, char *)); 119static int record_write __P((FILE *, int code, u_char *buf, int nb, 120 struct timeval *)); 121static int open_socket __P((char *)); 122static void maybe_relock __P((void *, int)); 123 124static int pty_master; /* fd for master side of pty */ 125static int pty_slave; /* fd for slave side of pty */ 126static int real_ttyfd; /* fd for actual serial port (not pty) */ 127static int ttyfd; /* Serial port file descriptor */ 128static char speed_str[16]; /* Serial port speed as string */ 129 130mode_t tty_mode = (mode_t)-1; /* Original access permissions to tty */ 131int baud_rate; /* Actual bits/second for serial device */ 132char *callback_script; /* script for doing callback */ 133int charshunt_pid; /* Process ID for charshunt */ 134int locked; /* lock() has succeeded */ 135struct stat devstat; /* result of stat() on devnam */ 136 137/* option variables */ 138int crtscts = 0; /* Use hardware flow control */ 139int stop_bits = 1; /* Number of serial port stop bits */ 140bool modem = 1; /* Use modem control lines */ 141int inspeed = 0; /* Input/Output speed requested */ 142bool lockflag = 0; /* Create lock file to lock the serial dev */ 143char *initializer = NULL; /* Script to initialize physical link */ 144char *connect_script = NULL; /* Script to establish physical link */ 145char *disconnect_script = NULL; /* Script to disestablish physical link */ 146char *welcomer = NULL; /* Script to run after phys link estab. */ 147char *ptycommand = NULL; /* Command to run on other side of pty */ 148bool notty = 0; /* Stdin/out is not a tty */ 149char *record_file = NULL; /* File to record chars sent/received */ 150int max_data_rate; /* max bytes/sec through charshunt */ 151bool sync_serial = 0; /* Device is synchronous serial device */ 152char *pty_socket = NULL; /* Socket to connect to pty */ 153int using_pty = 0; /* we're allocating a pty as the device */ 154 155extern uid_t uid; 156extern int kill_link; 157extern int asked_to_quit; 158extern int got_sigterm; 159 160/* XXX */ 161extern int privopen; /* don't lock, open device as root */ 162 163u_int32_t xmit_accm[8]; /* extended transmit ACCM */ 164 165/* option descriptors */ 166option_t tty_options[] = { 167 /* device name must be first, or change connect_tty() below! */ 168 { "device name", o_wild, (void *) &setdevname, 169 "Serial port device name", 170 OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, 171 devnam}, 172 173 { "tty speed", o_wild, (void *) &setspeed, 174 "Baud rate for serial port", 175 OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str }, 176 177 { "lock", o_bool, &lockflag, 178 "Lock serial device with UUCP-style lock file", OPT_PRIO | 1 }, 179 { "nolock", o_bool, &lockflag, 180 "Don't lock serial device", OPT_PRIOSUB | OPT_PRIV }, 181 182 { "init", o_string, &initializer, 183 "A program to initialize the device", OPT_PRIO | OPT_PRIVFIX }, 184 185 { "connect", o_string, &connect_script, 186 "A program to set up a connection", OPT_PRIO | OPT_PRIVFIX }, 187 188 { "disconnect", o_string, &disconnect_script, 189 "Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX }, 190 191 { "welcome", o_string, &welcomer, 192 "Script to welcome client", OPT_PRIO | OPT_PRIVFIX }, 193 194 { "pty", o_string, &ptycommand, 195 "Script to run on pseudo-tty master side", 196 OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM }, 197 198 { "notty", o_bool, ¬ty, 199 "Input/output is not a tty", OPT_DEVNAM | 1 }, 200 201 { "socket", o_string, &pty_socket, 202 "Send and receive over socket, arg is host:port", 203 OPT_PRIO | OPT_DEVNAM }, 204 205 { "record", o_string, &record_file, 206 "Record characters sent/received to file", OPT_PRIO }, 207 208 { "crtscts", o_int, &crtscts, 209 "Set hardware (RTS/CTS) flow control", 210 OPT_PRIO | OPT_NOARG | OPT_VAL(1) }, 211 { "cdtrcts", o_int, &crtscts, 212 "Set alternate hardware (DTR/CTS) flow control", 213 OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) }, 214 { "nocrtscts", o_int, &crtscts, 215 "Disable hardware flow control", 216 OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) }, 217 { "-crtscts", o_int, &crtscts, 218 "Disable hardware flow control", 219 OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) }, 220 { "nocdtrcts", o_int, &crtscts, 221 "Disable hardware flow control", 222 OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) }, 223 { "xonxoff", o_special_noarg, (void *)setxonxoff, 224 "Set software (XON/XOFF) flow control", OPT_PRIOSUB }, 225 { "stop-bits", o_int, &stop_bits, 226 "Number of stop bits in serial port", 227 OPT_PRIO | OPT_PRIVFIX | OPT_LIMITS, NULL, 2, 1 }, 228 229 { "modem", o_bool, &modem, 230 "Use modem control lines", OPT_PRIO | 1 }, 231 { "local", o_bool, &modem, 232 "Don't use modem control lines", OPT_PRIOSUB | 0 }, 233 234 { "sync", o_bool, &sync_serial, 235 "Use synchronous HDLC serial encoding", 1 }, 236 237 { "datarate", o_int, &max_data_rate, 238 "Maximum data rate in bytes/sec (with pty, notty or record option)", 239 OPT_PRIO }, 240 241 { "escape", o_special, (void *)setescape, 242 "List of character codes to escape on transmission", 243 OPT_A2PRINTER, (void *)printescape }, 244 245 { NULL } 246}; 247 248 249struct channel tty_channel = { 250 tty_options, 251 &tty_process_extra_options, 252 &tty_check_options, 253 &connect_tty, 254 &disconnect_tty, 255 &tty_establish_ppp, 256 &tty_disestablish_ppp, 257 &tty_do_send_config, 258 &tty_recv_config, 259 &cleanup_tty, 260 &tty_close_fds 261}; 262 263/* 264 * setspeed - Set the serial port baud rate. 265 * If doit is 0, the call is to check whether this option is 266 * potentially a speed value. 267 */ 268static int 269setspeed(arg, argv, doit) 270 char *arg; 271 char **argv; 272 int doit; 273{ 274 char *ptr; 275 int spd; 276 277 spd = strtol(arg, &ptr, 0); 278 if (ptr == arg || *ptr != 0 || spd == 0) 279 return 0; 280 if (doit) { 281 inspeed = spd; 282 slprintf(speed_str, sizeof(speed_str), "%d", spd); 283 } 284 return 1; 285} 286 287 288/* 289 * setdevname - Set the device name. 290 * If doit is 0, the call is to check whether this option is 291 * potentially a device name. 292 */ 293static int 294setdevname(cp, argv, doit) 295 char *cp; 296 char **argv; 297 int doit; 298{ 299 struct stat statbuf; 300 char dev[MAXPATHLEN]; 301 302 if (*cp == 0) 303 return 0; 304 305 if (*cp != '/') { 306 strlcpy(dev, "/dev/", sizeof(dev)); 307 strlcat(dev, cp, sizeof(dev)); 308 cp = dev; 309 } 310 311 /* 312 * Check if there is a character device by this name. 313 */ 314 if (stat(cp, &statbuf) < 0) { 315 if (!doit) 316 return errno != ENOENT; 317 option_error("Couldn't stat %s: %m", cp); 318 return 0; 319 } 320 if (!S_ISCHR(statbuf.st_mode)) { 321 if (doit) 322 option_error("%s is not a character device", cp); 323 return 0; 324 } 325 326 if (doit) { 327 strlcpy(devnam, cp, sizeof(devnam)); 328 devstat = statbuf; 329 default_device = 0; 330 } 331 332 return 1; 333} 334 335static int 336setxonxoff(argv) 337 char **argv; 338{ 339 lcp_wantoptions[0].asyncmap |= 0x000A0000; /* escape ^S and ^Q */ 340 lcp_wantoptions[0].neg_asyncmap = 1; 341 342 crtscts = -2; 343 return 1; 344} 345 346/* 347 * setescape - add chars to the set we escape on transmission. 348 */ 349static int 350setescape(argv) 351 char **argv; 352{ 353 int n, ret; 354 char *p, *endp; 355 356 p = *argv; 357 ret = 1; 358 while (*p) { 359 n = strtol(p, &endp, 16); 360 if (p == endp) { 361 option_error("escape parameter contains invalid hex number '%s'", 362 p); 363 return 0; 364 } 365 p = endp; 366 if (n < 0 || n == 0x5E || n > 0xFF) { 367 option_error("can't escape character 0x%x", n); 368 ret = 0; 369 } else 370 xmit_accm[n >> 5] |= 1 << (n & 0x1F); 371 while (*p == ',' || *p == ' ') 372 ++p; 373 } 374 lcp_allowoptions[0].asyncmap = xmit_accm[0]; 375 return ret; 376} 377 378static void 379printescape(opt, printer, arg) 380 option_t *opt; 381 void (*printer) __P((void *, char *, ...)); 382 void *arg; 383{ 384 int n; 385 int first = 1; 386 387 for (n = 0; n < 256; ++n) { 388 if (n == 0x7d) 389 n += 2; /* skip 7d, 7e */ 390 if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) { 391 if (!first) 392 printer(arg, ","); 393 else 394 first = 0; 395 printer(arg, "%x", n); 396 } 397 } 398 if (first) 399 printer(arg, "oops # nothing escaped"); 400} 401 402/* 403 * tty_init - do various tty-related initializations. 404 */ 405void tty_init() 406{ 407 add_notifier(&pidchange, maybe_relock, 0); 408 the_channel = &tty_channel; 409 xmit_accm[3] = 0x60000000; 410} 411 412/* 413 * tty_process_extra_options - work out which tty device we are using 414 * and read its options file. 415 */ 416void tty_process_extra_options() 417{ 418 using_pty = notty || ptycommand != NULL || pty_socket != NULL; 419 if (using_pty) 420 return; 421 if (default_device) { 422 char *p; 423 if (!isatty(0) || (p = ttyname(0)) == NULL) { 424 option_error("no device specified and stdin is not a tty"); 425 exit(EXIT_OPTION_ERROR); 426 } 427 strlcpy(devnam, p, sizeof(devnam)); 428 if (stat(devnam, &devstat) < 0) 429 fatal("Couldn't stat default device %s: %m", devnam); 430 } 431 432 433 /* 434 * Parse the tty options file. 435 * The per-tty options file should not change 436 * ptycommand, pty_socket, notty or devnam. 437 * options_for_tty doesn't override options set on the command line, 438 * except for some privileged options. 439 */ 440 if (!options_for_tty()) 441 exit(EXIT_OPTION_ERROR); 442} 443 444/* 445 * tty_check_options - do consistency checks on the options we were given. 446 */ 447void 448tty_check_options() 449{ 450 struct stat statbuf; 451 int fdflags; 452 453 if (demand && notty) { 454 option_error("demand-dialling is incompatible with notty"); 455 exit(EXIT_OPTION_ERROR); 456 } 457 if (demand && connect_script == 0 && ptycommand == NULL 458 && pty_socket == NULL) { 459 option_error("connect script is required for demand-dialling\n"); 460 exit(EXIT_OPTION_ERROR); 461 } 462 /* default holdoff to 0 if no connect script has been given */ 463 if (connect_script == 0 && !holdoff_specified) 464 holdoff = 0; 465 466 if (using_pty) { 467 if (!default_device) { 468 option_error("%s option precludes specifying device name", 469 pty_socket? "socket": notty? "notty": "pty"); 470 exit(EXIT_OPTION_ERROR); 471 } 472 if (ptycommand != NULL && notty) { 473 option_error("pty option is incompatible with notty option"); 474 exit(EXIT_OPTION_ERROR); 475 } 476 if (pty_socket != NULL && (ptycommand != NULL || notty)) { 477 option_error("socket option is incompatible with pty and notty"); 478 exit(EXIT_OPTION_ERROR); 479 } 480 default_device = notty; 481 lockflag = 0; 482 modem = 0; 483 if (notty && log_to_fd <= 1) 484 log_to_fd = -1; 485 } else { 486 /* 487 * If the user has specified a device which is the same as 488 * the one on stdin, pretend they didn't specify any. 489 * If the device is already open read/write on stdin, 490 * we assume we don't need to lock it, and we can open it 491 * as root. 492 */ 493 if (fstat(0, &statbuf) >= 0 && S_ISCHR(statbuf.st_mode) 494 && statbuf.st_rdev == devstat.st_rdev) { 495 default_device = 1; 496 fdflags = fcntl(0, F_GETFL); 497 if (fdflags != -1 && (fdflags & O_ACCMODE) == O_RDWR) 498 privopen = 1; 499 } 500 } 501 if (default_device) 502 nodetach = 1; 503 504 /* 505 * Don't send log messages to the serial port, it tends to 506 * confuse the peer. :-) 507 */ 508 if (log_to_fd >= 0 && fstat(log_to_fd, &statbuf) >= 0 509 && S_ISCHR(statbuf.st_mode) && statbuf.st_rdev == devstat.st_rdev) 510 log_to_fd = -1; 511} 512 513/* 514 * connect_tty - get the serial port ready to start doing PPP. 515 * That is, open the serial port, set its speed and mode, and run 516 * the connector and/or welcomer. 517 */ 518int connect_tty() 519{ 520 char *connector; 521 int fdflags; 522#ifndef __linux__ 523 struct stat statbuf; 524#endif 525 char numbuf[16]; 526 527 /* 528 * Get a pty master/slave pair if the pty, notty, socket, 529 * or record options were specified. 530 */ 531 strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam)); 532 pty_master = -1; 533 pty_slave = -1; 534 real_ttyfd = -1; 535 if (using_pty || record_file != NULL) { 536 if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) { 537 error("Couldn't allocate pseudo-tty"); 538 status = EXIT_FATAL_ERROR; 539 return -1; 540 } 541 set_up_tty(pty_slave, 1); 542 } 543 544 /* 545 * Lock the device if we've been asked to. 546 */ 547 status = EXIT_LOCK_FAILED; 548 if (lockflag && !privopen) { 549 if (lock(devnam) < 0) 550 goto errret; 551 locked = 1; 552 } 553 554 /* 555 * Open the serial device and set it up to be the ppp interface. 556 * First we open it in non-blocking mode so we can set the 557 * various termios flags appropriately. If we aren't dialling 558 * out and we want to use the modem lines, we reopen it later 559 * in order to wait for the carrier detect signal from the modem. 560 */ 561 got_sigterm = 0; 562 connector = doing_callback? callback_script: connect_script; 563 if (devnam[0] != 0) { 564 for (;;) { 565 /* If the user specified the device name, become the 566 user before opening it. */ 567 int err, prio; 568 569 prio = privopen? OPRIO_ROOT: tty_options[0].priority; 570 if (prio < OPRIO_ROOT && seteuid(uid) == -1) { 571 error("Unable to drop privileges before opening %s: %m\n", 572 devnam); 573 status = EXIT_OPEN_FAILED; 574 goto errret; 575 } 576 real_ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0); 577 err = errno; 578 if (prio < OPRIO_ROOT && seteuid(0) == -1) 579 fatal("Unable to regain privileges"); 580 if (real_ttyfd >= 0) 581 break; 582 errno = err; 583 if (err != EINTR) { 584 error("Failed to open %s: %m", devnam); 585 status = EXIT_OPEN_FAILED; 586 } 587 if (!persist || err != EINTR) 588 goto errret; 589 } 590 ttyfd = real_ttyfd; 591 if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1 592 || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0) 593 warn("Couldn't reset non-blocking mode on device: %m"); 594 595#ifndef __linux__ 596 /* 597 * Linux 2.4 and above blocks normal writes to the tty 598 * when it is in PPP line discipline, so this isn't needed. 599 */ 600 /* 601 * Do the equivalent of `mesg n' to stop broadcast messages. 602 */ 603 if (fstat(ttyfd, &statbuf) < 0 604 || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) { 605 warn("Couldn't restrict write permissions to %s: %m", devnam); 606 } else 607 tty_mode = statbuf.st_mode; 608#endif /* __linux__ */ 609 610 /* 611 * Set line speed, flow control, etc. 612 * If we have a non-null connection or initializer script, 613 * on most systems we set CLOCAL for now so that we can talk 614 * to the modem before carrier comes up. But this has the 615 * side effect that we might miss it if CD drops before we 616 * get to clear CLOCAL below. On systems where we can talk 617 * successfully to the modem with CLOCAL clear and CD down, 618 * we could clear CLOCAL at this point. 619 */ 620 set_up_tty(ttyfd, ((connector != NULL && connector[0] != 0) 621 || initializer != NULL)); 622 } 623 624 /* 625 * If the pty, socket, notty and/or record option was specified, 626 * start up the character shunt now. 627 */ 628 status = EXIT_PTYCMD_FAILED; 629 if (ptycommand != NULL) { 630 if (record_file != NULL) { 631 int ipipe[2], opipe[2], ok; 632 633 if (pipe(ipipe) < 0 || pipe(opipe) < 0) 634 fatal("Couldn't create pipes for record option: %m"); 635 636 /* don't leak these to the ptycommand */ 637 (void) fcntl(ipipe[0], F_SETFD, FD_CLOEXEC); 638 (void) fcntl(opipe[1], F_SETFD, FD_CLOEXEC); 639 640 ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0 641 && start_charshunt(ipipe[0], opipe[1]); 642 close(ipipe[0]); 643 close(ipipe[1]); 644 close(opipe[0]); 645 close(opipe[1]); 646 if (!ok) 647 goto errret; 648 } else { 649 if (device_script(ptycommand, pty_master, pty_master, 1) < 0) 650 goto errret; 651 } 652 } else if (pty_socket != NULL) { 653 int fd = open_socket(pty_socket); 654 if (fd < 0) 655 goto errret; 656 if (!start_charshunt(fd, fd)) 657 goto errret; 658 close(fd); 659 } else if (notty) { 660 if (!start_charshunt(0, 1)) 661 goto errret; 662 dup2(fd_devnull, 0); 663 dup2(fd_devnull, 1); 664 if (log_to_fd == 1) 665 log_to_fd = -1; 666 if (log_to_fd != 2) 667 dup2(fd_devnull, 2); 668 } else if (record_file != NULL) { 669 int fd = dup(ttyfd); 670 if (!start_charshunt(fd, fd)) 671 goto errret; 672 } 673 674 if (using_pty || record_file != NULL) { 675 ttyfd = pty_slave; 676 close(pty_master); 677 pty_master = -1; 678 } 679 680 /* run connection script */ 681 if ((connector && connector[0]) || initializer) { 682 if (real_ttyfd != -1) { 683 /* XXX do this if doing_callback == CALLBACK_DIALIN? */ 684 if (!default_device && modem) { 685 setdtr(real_ttyfd, 0); /* in case modem is off hook */ 686 sleep(1); 687 setdtr(real_ttyfd, 1); 688 } 689 } 690 691 if (initializer && initializer[0]) { 692 if (device_script(initializer, ttyfd, ttyfd, 0) < 0) { 693 error("Initializer script failed"); 694 status = EXIT_INIT_FAILED; 695 goto errretf; 696 } 697 if (got_sigterm) { 698 disconnect_tty(); 699 goto errretf; 700 } 701 info("Serial port initialized."); 702 } 703 704 if (connector && connector[0]) { 705 if (device_script(connector, ttyfd, ttyfd, 0) < 0) { 706 error("Connect script failed"); 707 status = EXIT_CONNECT_FAILED; 708 goto errretf; 709 } 710 if (got_sigterm) { 711 disconnect_tty(); 712 goto errretf; 713 } 714 info("Serial connection established."); 715 } 716 717 /* set line speed, flow control, etc.; 718 clear CLOCAL if modem option */ 719 if (real_ttyfd != -1) 720 set_up_tty(real_ttyfd, 0); 721 722 if (doing_callback == CALLBACK_DIALIN) 723 connector = NULL; 724 } 725 726 /* reopen tty if necessary to wait for carrier */ 727 if (connector == NULL && modem && devnam[0] != 0) { 728 int i; 729 for (;;) { 730 if ((i = open(devnam, O_RDWR)) >= 0) 731 break; 732 if (errno != EINTR) { 733 error("Failed to reopen %s: %m", devnam); 734 status = EXIT_OPEN_FAILED; 735 } 736 if (!persist || errno != EINTR || hungup || got_sigterm) 737 goto errret; 738 } 739 close(i); 740 } 741 742 slprintf(numbuf, sizeof(numbuf), "%d", baud_rate); 743 script_setenv("SPEED", numbuf, 0); 744 745 /* run welcome script, if any */ 746 if (welcomer && welcomer[0]) { 747 if (device_script(welcomer, ttyfd, ttyfd, 0) < 0) 748 warn("Welcome script failed"); 749 } 750 751 /* 752 * If we are initiating this connection, wait for a short 753 * time for something from the peer. This can avoid bouncing 754 * our packets off his tty before he has it set up. 755 */ 756 if (connector != NULL || ptycommand != NULL || pty_socket != NULL) 757 listen_time = connect_delay; 758 759 return ttyfd; 760 761 errretf: 762 if (real_ttyfd >= 0) 763 tcflush(real_ttyfd, TCIOFLUSH); 764 errret: 765 if (pty_master >= 0) { 766 close(pty_master); 767 pty_master = -1; 768 } 769 ttyfd = -1; 770 if (got_sigterm) 771 asked_to_quit = 1; 772 return -1; 773} 774 775 776void disconnect_tty() 777{ 778 if (disconnect_script == NULL || hungup) 779 return; 780 if (real_ttyfd >= 0) 781 set_up_tty(real_ttyfd, 1); 782 if (device_script(disconnect_script, ttyfd, ttyfd, 0) < 0) { 783 warn("disconnect script failed"); 784 } else { 785 info("Serial link disconnected."); 786 } 787 stop_charshunt(NULL, 0); 788} 789 790void tty_close_fds() 791{ 792 if (pty_slave >= 0) 793 close(pty_slave); 794 if (real_ttyfd >= 0) { 795 close(real_ttyfd); 796 real_ttyfd = -1; 797 } 798 /* N.B. ttyfd will == either pty_slave or real_ttyfd */ 799} 800 801void cleanup_tty() 802{ 803 if (real_ttyfd >= 0) 804 finish_tty(); 805 tty_close_fds(); 806 if (locked) { 807 unlock(); 808 locked = 0; 809 } 810} 811 812/* 813 * tty_do_send_config - set transmit-side PPP configuration. 814 * We set the extended transmit ACCM here as well. 815 */ 816void 817tty_do_send_config(mtu, accm, pcomp, accomp) 818 int mtu; 819 u_int32_t accm; 820 int pcomp, accomp; 821{ 822 tty_set_xaccm(xmit_accm); 823 tty_send_config(mtu, accm, pcomp, accomp); 824} 825 826/* 827 * finish_tty - restore the terminal device to its original settings 828 */ 829static void 830finish_tty() 831{ 832 /* drop dtr to hang up */ 833 if (!default_device && modem) { 834 setdtr(real_ttyfd, 0); 835 /* 836 * This sleep is in case the serial port has CLOCAL set by default, 837 * and consequently will reassert DTR when we close the device. 838 */ 839 sleep(1); 840 } 841 842 restore_tty(real_ttyfd); 843 844#ifndef __linux__ 845 if (tty_mode != (mode_t) -1) { 846 if (fchmod(real_ttyfd, tty_mode) != 0) 847 error("Couldn't restore tty permissions"); 848 } 849#endif /* __linux__ */ 850 851 close(real_ttyfd); 852 real_ttyfd = -1; 853} 854 855/* 856 * maybe_relock - our PID has changed, maybe update the lock file. 857 */ 858static void 859maybe_relock(arg, pid) 860 void *arg; 861 int pid; 862{ 863 if (locked) 864 relock(pid); 865} 866 867/* 868 * open_socket - establish a stream socket connection to the nominated 869 * host and port. 870 */ 871static int 872open_socket(dest) 873 char *dest; 874{ 875 char *sep, *endp = NULL; 876 int sock, port = -1; 877 u_int32_t host; 878 struct hostent *hent; 879 struct sockaddr_in sad; 880 881 /* parse host:port and resolve host to an IP address */ 882 sep = strchr(dest, ':'); 883 if (sep != NULL) 884 port = strtol(sep+1, &endp, 10); 885 if (port < 0 || endp == sep+1 || sep == dest) { 886 error("Can't parse host:port for socket destination"); 887 return -1; 888 } 889 *sep = 0; 890 host = inet_addr(dest); 891 if (host == (u_int32_t) -1) { 892 hent = gethostbyname(dest); 893 if (hent == NULL) { 894 error("%s: unknown host in socket option", dest); 895 *sep = ':'; 896 return -1; 897 } 898 host = *(u_int32_t *)(hent->h_addr_list[0]); 899 } 900 *sep = ':'; 901 902 /* get a socket and connect it to the other end */ 903 sock = socket(PF_INET, SOCK_STREAM, 0); 904 if (sock < 0) { 905 error("Can't create socket: %m"); 906 return -1; 907 } 908 memset(&sad, 0, sizeof(sad)); 909 sad.sin_family = AF_INET; 910 sad.sin_port = htons(port); 911 sad.sin_addr.s_addr = host; 912 if (connect(sock, (struct sockaddr *)&sad, sizeof(sad)) < 0) { 913 error("Can't connect to %s: %m", dest); 914 close(sock); 915 return -1; 916 } 917 918 return sock; 919} 920 921 922/* 923 * start_charshunt - create a child process to run the character shunt. 924 */ 925static int 926start_charshunt(ifd, ofd) 927 int ifd, ofd; 928{ 929 int cpid; 930 931 cpid = safe_fork(ifd, ofd, (log_to_fd >= 0? log_to_fd: 2)); 932 if (cpid == -1) { 933 error("Can't fork process for character shunt: %m"); 934 return 0; 935 } 936 if (cpid == 0) { 937 /* child */ 938 reopen_log(); 939 if (!nodetach) 940 log_to_fd = -1; 941 else if (log_to_fd >= 0) 942 log_to_fd = 2; 943 setgid(getgid()); 944 setuid(uid); 945 if (getuid() != uid) 946 fatal("setuid failed"); 947 charshunt(0, 1, record_file); 948 exit(0); 949 } 950 charshunt_pid = cpid; 951 record_child(cpid, "pppd (charshunt)", charshunt_done, NULL, 1); 952 return 1; 953} 954 955static void 956charshunt_done(arg) 957 void *arg; 958{ 959 charshunt_pid = 0; 960} 961 962static void 963stop_charshunt(arg, sig) 964 void *arg; 965 int sig; 966{ 967 if (charshunt_pid) 968 kill(charshunt_pid, (sig == SIGINT? sig: SIGTERM)); 969} 970 971/* 972 * charshunt - the character shunt, which passes characters between 973 * the pty master side and the serial port (or stdin/stdout). 974 * This runs as the user (not as root). 975 * (We assume ofd >= ifd which is true the way this gets called. :-). 976 */ 977static void 978charshunt(ifd, ofd, record_file) 979 int ifd, ofd; 980 char *record_file; 981{ 982 int n, nfds; 983 fd_set ready, writey; 984 u_char *ibufp, *obufp; 985 int nibuf, nobuf; 986 int flags; 987 int pty_readable, stdin_readable; 988 struct timeval lasttime; 989 FILE *recordf = NULL; 990 int ilevel, olevel, max_level; 991 struct timeval levelt, tout, *top; 992 extern u_char inpacket_buf[]; 993 994 /* 995 * Reset signal handlers. 996 */ 997 signal(SIGHUP, SIG_IGN); /* Hangup */ 998 signal(SIGINT, SIG_DFL); /* Interrupt */ 999 signal(SIGTERM, SIG_DFL); /* Terminate */ 1000 signal(SIGCHLD, SIG_DFL); 1001 signal(SIGUSR1, SIG_DFL); 1002 signal(SIGUSR2, SIG_DFL); 1003 signal(SIGABRT, SIG_DFL); 1004 signal(SIGALRM, SIG_DFL); 1005 signal(SIGFPE, SIG_DFL); 1006 signal(SIGILL, SIG_DFL); 1007 signal(SIGPIPE, SIG_DFL); 1008 signal(SIGQUIT, SIG_DFL); 1009 signal(SIGSEGV, SIG_DFL); 1010#ifdef SIGBUS 1011 signal(SIGBUS, SIG_DFL); 1012#endif 1013#ifdef SIGEMT 1014 signal(SIGEMT, SIG_DFL); 1015#endif 1016#ifdef SIGPOLL 1017 signal(SIGPOLL, SIG_DFL); 1018#endif 1019#ifdef SIGPROF 1020 signal(SIGPROF, SIG_DFL); 1021#endif 1022#ifdef SIGSYS 1023 signal(SIGSYS, SIG_DFL); 1024#endif 1025#ifdef SIGTRAP 1026 signal(SIGTRAP, SIG_DFL); 1027#endif 1028#ifdef SIGVTALRM 1029 signal(SIGVTALRM, SIG_DFL); 1030#endif 1031#ifdef SIGXCPU 1032 signal(SIGXCPU, SIG_DFL); 1033#endif 1034#ifdef SIGXFSZ 1035 signal(SIGXFSZ, SIG_DFL); 1036#endif 1037 1038 /* 1039 * Check that the fds won't overrun the fd_sets 1040 */ 1041 if (ifd >= FD_SETSIZE || ofd >= FD_SETSIZE || pty_master >= FD_SETSIZE) 1042 fatal("internal error: file descriptor too large (%d, %d, %d)", 1043 ifd, ofd, pty_master); 1044 1045 /* 1046 * Open the record file if required. 1047 */ 1048 if (record_file != NULL) { 1049 recordf = fopen(record_file, "a"); 1050 if (recordf == NULL) 1051 error("Couldn't create record file %s: %m", record_file); 1052 } 1053 1054 /* set all the fds to non-blocking mode */ 1055 flags = fcntl(pty_master, F_GETFL); 1056 if (flags == -1 1057 || fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1) 1058 warn("couldn't set pty master to nonblock: %m"); 1059 flags = fcntl(ifd, F_GETFL); 1060 if (flags == -1 1061 || fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1) 1062 warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty")); 1063 if (ofd != ifd) { 1064 flags = fcntl(ofd, F_GETFL); 1065 if (flags == -1 1066 || fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1) 1067 warn("couldn't set stdout to nonblock: %m"); 1068 } 1069 1070 nibuf = nobuf = 0; 1071 ibufp = obufp = NULL; 1072 pty_readable = stdin_readable = 1; 1073 1074 ilevel = olevel = 0; 1075 gettimeofday(&levelt, NULL); 1076 if (max_data_rate) { 1077 max_level = max_data_rate / 10; 1078 if (max_level < 100) 1079 max_level = 100; 1080 } else 1081 max_level = PPP_MRU + PPP_HDRLEN + 1; 1082 1083 nfds = (ofd > pty_master? ofd: pty_master) + 1; 1084 if (recordf != NULL) { 1085 gettimeofday(&lasttime, NULL); 1086 putc(7, recordf); /* put start marker */ 1087 putc(lasttime.tv_sec >> 24, recordf); 1088 putc(lasttime.tv_sec >> 16, recordf); 1089 putc(lasttime.tv_sec >> 8, recordf); 1090 putc(lasttime.tv_sec, recordf); 1091 lasttime.tv_usec = 0; 1092 } 1093 1094 while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) { 1095 top = 0; 1096 tout.tv_sec = 0; 1097 tout.tv_usec = 10000; 1098 FD_ZERO(&ready); 1099 FD_ZERO(&writey); 1100 if (nibuf != 0) { 1101 if (ilevel >= max_level) 1102 top = &tout; 1103 else 1104 FD_SET(pty_master, &writey); 1105 } else if (stdin_readable) 1106 FD_SET(ifd, &ready); 1107 if (nobuf != 0) { 1108 if (olevel >= max_level) 1109 top = &tout; 1110 else 1111 FD_SET(ofd, &writey); 1112 } else if (pty_readable) 1113 FD_SET(pty_master, &ready); 1114 if (select(nfds, &ready, &writey, NULL, top) < 0) { 1115 if (errno != EINTR) 1116 fatal("select"); 1117 continue; 1118 } 1119 if (max_data_rate) { 1120 double dt; 1121 int nbt; 1122 struct timeval now; 1123 1124 gettimeofday(&now, NULL); 1125 dt = (now.tv_sec - levelt.tv_sec 1126 + (now.tv_usec - levelt.tv_usec) / 1e6); 1127 nbt = (int)(dt * max_data_rate); 1128 ilevel = (nbt < 0 || nbt > ilevel)? 0: ilevel - nbt; 1129 olevel = (nbt < 0 || nbt > olevel)? 0: olevel - nbt; 1130 levelt = now; 1131 } else 1132 ilevel = olevel = 0; 1133 if (FD_ISSET(ifd, &ready)) { 1134 ibufp = inpacket_buf; 1135 nibuf = read(ifd, ibufp, PPP_MRU + PPP_HDRLEN); 1136 if (nibuf < 0 && errno == EIO) 1137 nibuf = 0; 1138 if (nibuf < 0) { 1139 if (!(errno == EINTR || errno == EAGAIN)) { 1140 error("Error reading standard input: %m"); 1141 break; 1142 } 1143 nibuf = 0; 1144 } else if (nibuf == 0) { 1145 /* end of file from stdin */ 1146 stdin_readable = 0; 1147 if (recordf) 1148 if (!record_write(recordf, 4, NULL, 0, &lasttime)) 1149 recordf = NULL; 1150 } else { 1151 FD_SET(pty_master, &writey); 1152 if (recordf) 1153 if (!record_write(recordf, 2, ibufp, nibuf, &lasttime)) 1154 recordf = NULL; 1155 } 1156 } 1157 if (FD_ISSET(pty_master, &ready)) { 1158 obufp = outpacket_buf; 1159 nobuf = read(pty_master, obufp, PPP_MRU + PPP_HDRLEN); 1160 if (nobuf < 0 && errno == EIO) 1161 nobuf = 0; 1162 if (nobuf < 0) { 1163 if (!(errno == EINTR || errno == EAGAIN)) { 1164 error("Error reading pseudo-tty master: %m"); 1165 break; 1166 } 1167 nobuf = 0; 1168 } else if (nobuf == 0) { 1169 /* end of file from the pty - slave side has closed */ 1170 pty_readable = 0; 1171 stdin_readable = 0; /* pty is not writable now */ 1172 nibuf = 0; 1173 close(ofd); 1174 if (recordf) 1175 if (!record_write(recordf, 3, NULL, 0, &lasttime)) 1176 recordf = NULL; 1177 } else { 1178 FD_SET(ofd, &writey); 1179 if (recordf) 1180 if (!record_write(recordf, 1, obufp, nobuf, &lasttime)) 1181 recordf = NULL; 1182 } 1183 } else if (!stdin_readable) 1184 pty_readable = 0; 1185 if (FD_ISSET(ofd, &writey)) { 1186 n = nobuf; 1187 if (olevel + n > max_level) 1188 n = max_level - olevel; 1189 n = write(ofd, obufp, n); 1190 if (n < 0) { 1191 if (errno == EIO) { 1192 pty_readable = 0; 1193 nobuf = 0; 1194 } else if (errno != EAGAIN && errno != EINTR) { 1195 error("Error writing standard output: %m"); 1196 break; 1197 } 1198 } else { 1199 obufp += n; 1200 nobuf -= n; 1201 olevel += n; 1202 } 1203 } 1204 if (FD_ISSET(pty_master, &writey)) { 1205 n = nibuf; 1206 if (ilevel + n > max_level) 1207 n = max_level - ilevel; 1208 n = write(pty_master, ibufp, n); 1209 if (n < 0) { 1210 if (errno == EIO) { 1211 stdin_readable = 0; 1212 nibuf = 0; 1213 } else if (errno != EAGAIN && errno != EINTR) { 1214 error("Error writing pseudo-tty master: %m"); 1215 break; 1216 } 1217 } else { 1218 ibufp += n; 1219 nibuf -= n; 1220 ilevel += n; 1221 } 1222 } 1223 } 1224 exit(0); 1225} 1226 1227static int 1228record_write(f, code, buf, nb, tp) 1229 FILE *f; 1230 int code; 1231 u_char *buf; 1232 int nb; 1233 struct timeval *tp; 1234{ 1235 struct timeval now; 1236 int diff; 1237 1238 gettimeofday(&now, NULL); 1239 now.tv_usec /= 100000; /* actually 1/10 s, not usec now */ 1240 diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec); 1241 if (diff > 0) { 1242 if (diff > 255) { 1243 putc(5, f); 1244 putc(diff >> 24, f); 1245 putc(diff >> 16, f); 1246 putc(diff >> 8, f); 1247 putc(diff, f); 1248 } else { 1249 putc(6, f); 1250 putc(diff, f); 1251 } 1252 *tp = now; 1253 } 1254 putc(code, f); 1255 if (buf != NULL) { 1256 putc(nb >> 8, f); 1257 putc(nb, f); 1258 fwrite(buf, nb, 1, f); 1259 } 1260 fflush(f); 1261 if (ferror(f)) { 1262 error("Error writing record file: %m"); 1263 return 0; 1264 } 1265 return 1; 1266} 1267