Lines Matching refs:logmsg
314 # logmsg is our general message logging subroutine.
316 sub logmsg {
339 logmsg "runtests.pl received SIG$signame, exiting\n";
419 logmsg "startnew: $cmd\n" if ($verbose);
425 logmsg "startnew: fork() failure detected\n";
446 logmsg "startnew: $pidfile faked with pid=$child\n" if($verbose);
449 logmsg "startnew: failed to write fake $pidfile with pid=$child\n";
454 logmsg "startnew: child process has failed to start\n" if($verbose);
474 logmsg "startnew: child process has died, server might start up\n"
567 logmsg " CMD: $testcmd\n" if($verbose);
579 logmsg " found no allocs to make fail\n";
583 logmsg " $count allocations to make fail\n";
598 logmsg "Fail alloc no: $limit at $now\r";
607 logmsg "*** Alloc number $limit is now set to fail ***\n" if($gdbthis);
616 #logmsg "$_ Returned " . ($ret >> 8) . "\n";
623 logmsg " core dumped\n";
631 logmsg " system() returned $ret\n";
645 logmsg "** MEMORY FAILURE\n";
646 logmsg @memdata;
647 logmsg `$memanalyze -l $memdump`;
652 logmsg " Failed on alloc number $limit in test.\n",
659 logmsg "torture OK\n";
718 logmsg "Warning: $server server unexpectedly alive\n";
765 logmsg "RUN: $cmd\n" if($verbose);
770 logmsg "RUN: curl command died with a coredump\n";
775 logmsg "RUN: curl command returned $res\n";
778 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
798 logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
802 logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
839 logmsg "RUN: $cmd\n" if($verbose);
844 logmsg "RUN: curl command died with a coredump\n";
857 logmsg "RUN: Unknown server on our $server port: $port\n";
865 logmsg "RUN: Verifying our test $server server took $took seconds\n";
902 logmsg "RUN: $cmd\n" if($verbose);
907 logmsg "RUN: curl command died with a coredump\n";
912 logmsg "RUN: curl command returned $res\n";
915 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
935 logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
939 logmsg "RUN: Unknown server on our $server port: $port\n";
963 logmsg "RUN: SSH server has died after starting up\n";
983 logmsg "RUN: SFTP server cannot find $sftpexe\n";
989 logmsg "RUN: SFTP server cannot find $sshexe\n";
1042 logmsg "RUN: $cmd\n" if($verbose);
1047 logmsg "RUN: curl command died with a coredump\n";
1052 logmsg "RUN: curl command returned $res\n";
1055 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
1076 logmsg "RUN: $server server has died after starting up\n";
1086 logmsg "RUN: failed to resolve host (https://$ip:$port/verifiedserver)\n";
1090 logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
1112 logmsg "RUN: SOCKS server has died after starting up\n";
1189 logmsg " server precheck FAILED (unresponsive $srvrname server)\n";
1237 logmsg "RUN: failed to start the $srvrname server\n";
1244 logmsg "RUN: $srvrname server is now running PID $http2pid\n";
1322 logmsg "RUN: failed to start the $srvrname server\n";
1332 logmsg "RUN: $srvrname server failed verification\n";
1342 logmsg "RUN: $srvrname server is now running PID $httppid\n";
1397 logmsg "RUN: failed to start the $srvrname server\n";
1407 logmsg "RUN: $srvrname server failed verification\n";
1417 logmsg "RUN: $srvrname server is now running PID $httppid\n";
1478 logmsg "RUN: failed to start the $srvrname server\n";
1488 logmsg "RUN: $srvrname server failed verification\n";
1500 logmsg "RUN: $srvrname server is now running PID $httpspid\n";
1559 logmsg "RUN: failed to start the $srvrname server\n";
1569 logmsg "RUN: $srvrname server failed verification\n";
1579 logmsg "RUN: $srvrname server is now running PID $httptlspid\n";
1654 logmsg "RUN: failed to start the $srvrname server\n";
1664 logmsg "RUN: $srvrname server failed verification\n";
1675 logmsg "RUN: $srvrname server is now running PID $ftppid\n";
1736 logmsg "RUN: failed to start the $srvrname server\n";
1746 logmsg "RUN: $srvrname server failed verification\n";
1758 logmsg "RUN: $srvrname server is now running PID $ftpspid\n";
1818 logmsg "RUN: failed to start the $srvrname server\n";
1828 logmsg "RUN: $srvrname server failed verification\n";
1838 logmsg "RUN: $srvrname server is now running PID $tftppid\n";
1899 logmsg "RUN: failed to start the $srvrname server\n";
1909 logmsg "RUN: $srvrname server failed verification\n";
1919 logmsg "RUN: $srvrname server is now running PID $rtsppid\n";
1981 logmsg "RUN: failed to start the $srvrname server\n";
1993 logmsg "RUN: $srvrname server failed verification\n";
2009 logmsg "RUN: SFTP server failed verification\n";
2021 logmsg "RUN: $srvrname server is now running PID $pid2\n";
2064 logmsg "RUN: SOCKS server cannot find running SSH server\n";
2072 logmsg "RUN: SOCKS server cannot find $sshdexe\n";
2081 logmsg "$sshderror\n" if($verbose);
2082 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
2086 logmsg "ssh server found $sshd is $sshdverstr\n" if($verbose);
2091 logmsg "RUN: SOCKS server cannot find $sshexe\n";
2100 logmsg "$ssherror\n" if($verbose);
2101 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
2109 logmsg "ssh client found $ssh is $sshverstr\n";
2110 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
2114 logmsg "ssh client found $ssh is $sshverstr\n" if($verbose);
2119 logmsg "Warning: version mismatch: sshd $sshdverstr - ssh $sshverstr\n"
2125 logmsg "RUN: SOCKS server cannot find $sshconfig\n";
2138 logmsg "RUN: failed to start the $srvrname server\n";
2151 logmsg "RUN: $srvrname server failed verification\n";
2160 logmsg "RUN: $srvrname server is now running PID $pid2\n";
2323 logmsg "\n $testnum: $subject FAILED:\n";
2324 logmsg showdiff($LOGDIR, $firstref, $secondref);
2327 logmsg "FAILED\n";
2331 logmsg "FAIL: $testnum - $testname - $subject\n";
2572 logmsg "unable to get curl's version, further details are:\n";
2573 logmsg "issued command: \n";
2574 logmsg "$versioncmd \n";
2576 logmsg "command failed with: \n";
2577 logmsg "$versnoexec \n";
2580 logmsg sprintf("command died with signal %d, and %s coredump.\n",
2584 logmsg sprintf("command exited with value %d \n", $versretval >> 8);
2586 logmsg "contents of $curlverout: \n";
2588 logmsg "contents of $curlvererr: \n";
2639 logmsg ("********* System characteristics ******** \n",
2648 logmsg("*\n",
2653 logmsg sprintf("* Servers: %s", $stunnel?"SSL ":"");
2654 logmsg sprintf("%s", $http_ipv6?"HTTP-IPv6 ":"");
2655 logmsg sprintf("%s", $http_unix?"HTTP-unix ":"");
2656 logmsg sprintf("%s\n", $ftp_ipv6?"FTP-IPv6 ":"OFF");
2658 logmsg sprintf("* Env: %s%s", $valgrind?"Valgrind ":"",
2660 logmsg sprintf("%s\n", $libtool?"Libtool ":"");
2663 logmsg "* Ports:\n";
2665 logmsg sprintf("* HTTP/%d ", $HTTPPORT);
2666 logmsg sprintf("FTP/%d ", $FTPPORT);
2667 logmsg sprintf("FTP2/%d ", $FTP2PORT);
2668 logmsg sprintf("RTSP/%d ", $RTSPPORT);
2670 logmsg sprintf("FTPS/%d ", $FTPSPORT);
2671 logmsg sprintf("HTTPS/%d ", $HTTPSPORT);
2673 logmsg sprintf("\n* TFTP/%d ", $TFTPPORT);
2675 logmsg sprintf("HTTP-IPv6/%d ", $HTTP6PORT);
2676 logmsg sprintf("RTSP-IPv6/%d ", $RTSP6PORT);
2679 logmsg sprintf("FTP-IPv6/%d ", $FTP6PORT);
2682 logmsg sprintf("TFTP-IPv6/%d ", $TFTP6PORT);
2684 logmsg sprintf("\n* GOPHER/%d ", $GOPHERPORT);
2686 logmsg sprintf("GOPHER-IPv6/%d", $GOPHERPORT);
2688 logmsg sprintf("\n* SSH/%d ", $SSHPORT);
2689 logmsg sprintf("SOCKS/%d ", $SOCKSPORT);
2690 logmsg sprintf("POP3/%d ", $POP3PORT);
2691 logmsg sprintf("IMAP/%d ", $IMAPPORT);
2692 logmsg sprintf("SMTP/%d\n", $SMTPPORT);
2694 logmsg sprintf("* POP3-IPv6/%d ", $POP36PORT);
2695 logmsg sprintf("IMAP-IPv6/%d ", $IMAP6PORT);
2696 logmsg sprintf("SMTP-IPv6/%d\n", $SMTP6PORT);
2699 logmsg sprintf("* HTTPTLS/%d ", $HTTPTLSPORT);
2701 logmsg sprintf("HTTPTLS-IPv6/%d ", $HTTPTLS6PORT);
2703 logmsg "\n";
2705 logmsg sprintf("* HTTP-PIPE/%d \n", $HTTPPIPEPORT);
2708 logmsg "* Unix socket paths:\n";
2710 logmsg sprintf("* HTTP-Unix:%s\n", $HTTPUNIXPATH);
2716 logmsg "***************************************** \n";
2883 logmsg "Warning: test$testnum not present in tests/data/Makefile.inc\n";
2886 logmsg "Warning: test$testnum is explicitly disabled\n";
2893 logmsg "RUN: $testnum doesn't look like a test case\n";
3312 logmsg "prechecked $cmd\n" if($verbose);
3326 logmsg sprintf("test %04d SKIPPED: $why\n", $testnum);
3333 logmsg sprintf("test %04d...", $testnum) if(!$automakestyle);
3414 logmsg "[$testname]\n" if(!$short);
3463 logmsg "ERROR: section client=>file has no name attribute\n";
3469 # logmsg "DEBUG: writing file " . $filename . "\n";
3551 logmsg "The tool set in the test case for this: '$tool' does not exist\n";
3566 logmsg "This test cannot run event based\n";
3609 logmsg "$CMDLINE\n";
3626 logmsg "perl: $code\n";
3627 logmsg "precommand: $@";
3681 logmsg "core dumped\n";
3683 logmsg "running gdb for post-mortem analysis:\n";
3705 logmsg "Warning: server logs lock timeout ",
3782 logmsg "Warning: $server server unexpectedly alive\n";
3799 logmsg "postcheck $cmd\n" if($verbose);
3804 logmsg " postcheck FAILED\n";
4020 logmsg "ERROR: section verify=>file$partsuffix ".
4083 logmsg sprintf("\n%s returned $cmdres, when expecting %s\n",
4086 logmsg " exit FAILED\n";
4094 logmsg "\n** ALERT! memory tracking with no output file?\n"
4108 logmsg "\n** MEMORY FAILURE\n";
4109 logmsg @memdata;
4126 logmsg "ERROR: unable to read $LOGDIR\n";
4141 logmsg "ERROR: valgrind log file missing for test $testnum\n";
4149 logmsg "FAIL: $testnum - $testname - valgrind\n";
4152 logmsg " valgrind ERROR ";
4153 logmsg @e;
4163 logmsg " valgrind SKIPPED\n";
4174 logmsg "$ok " if(!$short);
4184 logmsg sprintf("OK (%-3d out of %-3d, %s)\n", $count, $total, $left);
4187 logmsg "PASS: $testnum - $testname\n";
4221 logmsg sprintf("* kill pid for %s => %d\n",
4240 logmsg "Warning: $server server unexpectedly alive\n";
4306 logmsg sprintf("* pid ftp-ipv6 => %d %d\n", $pid,
4322 logmsg sprintf ("* pid gopher => %d %d\n", $pid, $pid2)
4339 logmsg sprintf("* pid gopher-ipv6 => %d %d\n", $pid,
4350 logmsg sprintf ("* pid http/2 => %d %d\n", $pid, $pid2)
4366 logmsg sprintf ("* pid http => %d %d\n", $pid, $pid2)
4383 logmsg sprintf ("* pid http-proxy => %d %d\n", $pid, $pid2)
4399 logmsg sprintf("* pid http-ipv6 => %d %d\n", $pid, $pid2)
4416 logmsg sprintf ("* pid http-pipe => %d %d\n", $pid, $pid2)
4445 logmsg sprintf("* pid rtsp-ipv6 => %d %d\n", $pid, $pid2)
4480 logmsg sprintf("* pid ftps => %d %d\n", $pid, $pid2)
4519 logmsg sprintf("* pid https => %d %d\n", $pid, $pid2)
4538 logmsg sprintf("* pid httptls => %d %d\n", $pid, $pid2)
4557 logmsg sprintf("* pid httptls-ipv6 => %d %d\n", $pid, $pid2)
4612 logmsg "Not OpenSSH or SunSSH; socks5 tests need at least OpenSSH 3.7\n";
4617 logmsg "$sshdverstr insufficient; socks5 tests need at least OpenSSH 3.7\n";
4622 logmsg "$sshdverstr insufficient; socks5 tests need at least SunSSH 1.0\n";
4638 logmsg sprintf("* pid http-unix => %d %d\n", $pid, $pid2)
4644 logmsg "* starts no server\n" if ($verbose);
4707 logmsg "\nTest suite total running time breakdown per task...\n\n";
4759 logmsg "Spent ". sprintf("%08.3f ", $timesrvrtot) .
4761 logmsg "Spent ". sprintf("%08.3f ", $timepreptot) .
4763 logmsg "Spent ". sprintf("%08.3f ", $timetooltot) .
4765 logmsg "Spent ". sprintf("%08.3f ", $timelocktot) .
4767 logmsg "Spent ". sprintf("%08.3f ", $timevrfytot) .
4769 logmsg "Spent ". sprintf("%08.3f ", $timetesttot) .
4773 logmsg "\nTest server starting and verification time per test ".
4775 logmsg "-time- test\n";
4776 logmsg "------ ----\n";
4779 logmsg "$txt\n";
4783 logmsg "\nTest definition reading and preparation time per test ".
4785 logmsg "-time- test\n";
4786 logmsg "------ ----\n";
4789 logmsg "$txt\n";
4793 logmsg "\nTest tool execution time per test ".
4795 logmsg "-time- test\n";
4796 logmsg "------ ----\n";
4799 logmsg "$txt\n";
4803 logmsg "\nTest server logs lock removal time per test ".
4805 logmsg "-time- test\n";
4806 logmsg "------ ----\n";
4809 logmsg "$txt\n";
4813 logmsg "\nTest results verification time per test ".
4815 logmsg "-time- test\n";
4816 logmsg "------ ----\n";
4819 logmsg "$txt\n";
4823 logmsg "\nTotal time per test ".
4825 logmsg "-time- test\n";
4826 logmsg "------ ----\n";
4829 logmsg "$txt\n";
4832 logmsg "\n";
5025 #logmsg "Valgrind failure, disable it\n";
5194 logmsg "can't log command lines to $CURLLOG\n";
5216 logmsg " $line\n";
5228 logmsg "=== File too long: $tailskip lines omitted here\n";
5231 logmsg "$tail[$_]";
5245 logmsg "== Contents of files in the $LOGDIR/ dir after test $testnum\n";
5286 logmsg "=== Start of file $log\n";
5288 logmsg "=== End of file $log\n";
5327 logmsg "\n - abort tests\n";
5353 logmsg sprintf("TESTDONE: $ok tests out of $total reported OK: %d%%\n",
5357 logmsg "TESTFAIL: These test cases failed: $failed\n";
5361 logmsg "TESTFAIL: No tests were performed\n";
5365 logmsg "TESTDONE: $all tests were considered during ".
5371 logmsg "TESTINFO: $skipped tests were skipped due to these restraints:\n";
5385 logmsg ", " if($c);
5386 logmsg $_;
5392 logmsg " and ".($c-$max)." more";
5394 logmsg ")\n";