r300_state.c revision 560ad7e59940423a696e93e62ec3c41b1e553421
1/* 2 * Copyright 2008 Corbin Simpson <MostAwesomeDude@gmail.com> 3 * Copyright 2009 Marek Olšák <maraeo@gmail.com> 4 * 5 * Permission is hereby granted, free of charge, to any person obtaining a 6 * copy of this software and associated documentation files (the "Software"), 7 * to deal in the Software without restriction, including without limitation 8 * on the rights to use, copy, modify, merge, publish, distribute, sub 9 * license, and/or sell copies of the Software, and to permit persons to whom 10 * the Software is furnished to do so, subject to the following conditions: 11 * 12 * The above copyright notice and this permission notice (including the next 13 * paragraph) shall be included in all copies or substantial portions of the 14 * Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, 20 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 21 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE 22 * USE OR OTHER DEALINGS IN THE SOFTWARE. */ 23 24#include "draw/draw_context.h" 25 26#include "util/u_framebuffer.h" 27#include "util/u_math.h" 28#include "util/u_mm.h" 29#include "util/u_memory.h" 30#include "util/u_pack_color.h" 31 32#include "tgsi/tgsi_parse.h" 33 34#include "pipe/p_config.h" 35 36#include "r300_cb.h" 37#include "r300_context.h" 38#include "r300_emit.h" 39#include "r300_reg.h" 40#include "r300_screen.h" 41#include "r300_screen_buffer.h" 42#include "r300_state_inlines.h" 43#include "r300_fs.h" 44#include "r300_texture.h" 45#include "r300_vs.h" 46#include "r300_winsys.h" 47#include "r300_hyperz.h" 48 49/* r300_state: Functions used to intialize state context by translating 50 * Gallium state objects into semi-native r300 state objects. */ 51 52#define UPDATE_STATE(cso, atom) \ 53 if (cso != atom.state) { \ 54 atom.state = cso; \ 55 atom.dirty = TRUE; \ 56 } 57 58static boolean blend_discard_if_src_alpha_0(unsigned srcRGB, unsigned srcA, 59 unsigned dstRGB, unsigned dstA) 60{ 61 /* If the blend equation is ADD or REVERSE_SUBTRACT, 62 * SRC_ALPHA == 0, and the following state is set, the colorbuffer 63 * will not be changed. 64 * Notice that the dst factors are the src factors inverted. */ 65 return (srcRGB == PIPE_BLENDFACTOR_SRC_ALPHA || 66 srcRGB == PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE || 67 srcRGB == PIPE_BLENDFACTOR_ZERO) && 68 (srcA == PIPE_BLENDFACTOR_SRC_COLOR || 69 srcA == PIPE_BLENDFACTOR_SRC_ALPHA || 70 srcA == PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE || 71 srcA == PIPE_BLENDFACTOR_ZERO) && 72 (dstRGB == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 73 dstRGB == PIPE_BLENDFACTOR_ONE) && 74 (dstA == PIPE_BLENDFACTOR_INV_SRC_COLOR || 75 dstA == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 76 dstA == PIPE_BLENDFACTOR_ONE); 77} 78 79static boolean blend_discard_if_src_alpha_1(unsigned srcRGB, unsigned srcA, 80 unsigned dstRGB, unsigned dstA) 81{ 82 /* If the blend equation is ADD or REVERSE_SUBTRACT, 83 * SRC_ALPHA == 1, and the following state is set, the colorbuffer 84 * will not be changed. 85 * Notice that the dst factors are the src factors inverted. */ 86 return (srcRGB == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 87 srcRGB == PIPE_BLENDFACTOR_ZERO) && 88 (srcA == PIPE_BLENDFACTOR_INV_SRC_COLOR || 89 srcA == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 90 srcA == PIPE_BLENDFACTOR_ZERO) && 91 (dstRGB == PIPE_BLENDFACTOR_SRC_ALPHA || 92 dstRGB == PIPE_BLENDFACTOR_ONE) && 93 (dstA == PIPE_BLENDFACTOR_SRC_COLOR || 94 dstA == PIPE_BLENDFACTOR_SRC_ALPHA || 95 dstA == PIPE_BLENDFACTOR_ONE); 96} 97 98static boolean blend_discard_if_src_color_0(unsigned srcRGB, unsigned srcA, 99 unsigned dstRGB, unsigned dstA) 100{ 101 /* If the blend equation is ADD or REVERSE_SUBTRACT, 102 * SRC_COLOR == (0,0,0), and the following state is set, the colorbuffer 103 * will not be changed. 104 * Notice that the dst factors are the src factors inverted. */ 105 return (srcRGB == PIPE_BLENDFACTOR_SRC_COLOR || 106 srcRGB == PIPE_BLENDFACTOR_ZERO) && 107 (srcA == PIPE_BLENDFACTOR_ZERO) && 108 (dstRGB == PIPE_BLENDFACTOR_INV_SRC_COLOR || 109 dstRGB == PIPE_BLENDFACTOR_ONE) && 110 (dstA == PIPE_BLENDFACTOR_ONE); 111} 112 113static boolean blend_discard_if_src_color_1(unsigned srcRGB, unsigned srcA, 114 unsigned dstRGB, unsigned dstA) 115{ 116 /* If the blend equation is ADD or REVERSE_SUBTRACT, 117 * SRC_COLOR == (1,1,1), and the following state is set, the colorbuffer 118 * will not be changed. 119 * Notice that the dst factors are the src factors inverted. */ 120 return (srcRGB == PIPE_BLENDFACTOR_INV_SRC_COLOR || 121 srcRGB == PIPE_BLENDFACTOR_ZERO) && 122 (srcA == PIPE_BLENDFACTOR_ZERO) && 123 (dstRGB == PIPE_BLENDFACTOR_SRC_COLOR || 124 dstRGB == PIPE_BLENDFACTOR_ONE) && 125 (dstA == PIPE_BLENDFACTOR_ONE); 126} 127 128static boolean blend_discard_if_src_alpha_color_0(unsigned srcRGB, unsigned srcA, 129 unsigned dstRGB, unsigned dstA) 130{ 131 /* If the blend equation is ADD or REVERSE_SUBTRACT, 132 * SRC_ALPHA_COLOR == (0,0,0,0), and the following state is set, 133 * the colorbuffer will not be changed. 134 * Notice that the dst factors are the src factors inverted. */ 135 return (srcRGB == PIPE_BLENDFACTOR_SRC_COLOR || 136 srcRGB == PIPE_BLENDFACTOR_SRC_ALPHA || 137 srcRGB == PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE || 138 srcRGB == PIPE_BLENDFACTOR_ZERO) && 139 (srcA == PIPE_BLENDFACTOR_SRC_COLOR || 140 srcA == PIPE_BLENDFACTOR_SRC_ALPHA || 141 srcA == PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE || 142 srcA == PIPE_BLENDFACTOR_ZERO) && 143 (dstRGB == PIPE_BLENDFACTOR_INV_SRC_COLOR || 144 dstRGB == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 145 dstRGB == PIPE_BLENDFACTOR_ONE) && 146 (dstA == PIPE_BLENDFACTOR_INV_SRC_COLOR || 147 dstA == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 148 dstA == PIPE_BLENDFACTOR_ONE); 149} 150 151static boolean blend_discard_if_src_alpha_color_1(unsigned srcRGB, unsigned srcA, 152 unsigned dstRGB, unsigned dstA) 153{ 154 /* If the blend equation is ADD or REVERSE_SUBTRACT, 155 * SRC_ALPHA_COLOR == (1,1,1,1), and the following state is set, 156 * the colorbuffer will not be changed. 157 * Notice that the dst factors are the src factors inverted. */ 158 return (srcRGB == PIPE_BLENDFACTOR_INV_SRC_COLOR || 159 srcRGB == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 160 srcRGB == PIPE_BLENDFACTOR_ZERO) && 161 (srcA == PIPE_BLENDFACTOR_INV_SRC_COLOR || 162 srcA == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 163 srcA == PIPE_BLENDFACTOR_ZERO) && 164 (dstRGB == PIPE_BLENDFACTOR_SRC_COLOR || 165 dstRGB == PIPE_BLENDFACTOR_SRC_ALPHA || 166 dstRGB == PIPE_BLENDFACTOR_ONE) && 167 (dstA == PIPE_BLENDFACTOR_SRC_COLOR || 168 dstA == PIPE_BLENDFACTOR_SRC_ALPHA || 169 dstA == PIPE_BLENDFACTOR_ONE); 170} 171 172static unsigned bgra_cmask(unsigned mask) 173{ 174 /* Gallium uses RGBA color ordering while R300 expects BGRA. */ 175 176 return ((mask & PIPE_MASK_R) << 2) | 177 ((mask & PIPE_MASK_B) >> 2) | 178 (mask & (PIPE_MASK_G | PIPE_MASK_A)); 179} 180 181/* Create a new blend state based on the CSO blend state. 182 * 183 * This encompasses alpha blending, logic/raster ops, and blend dithering. */ 184static void* r300_create_blend_state(struct pipe_context* pipe, 185 const struct pipe_blend_state* state) 186{ 187 struct r300_screen* r300screen = r300_screen(pipe->screen); 188 struct r300_blend_state* blend = CALLOC_STRUCT(r300_blend_state); 189 uint32_t blend_control = 0; /* R300_RB3D_CBLEND: 0x4e04 */ 190 uint32_t alpha_blend_control = 0; /* R300_RB3D_ABLEND: 0x4e08 */ 191 uint32_t color_channel_mask = 0; /* R300_RB3D_COLOR_CHANNEL_MASK: 0x4e0c */ 192 uint32_t rop = 0; /* R300_RB3D_ROPCNTL: 0x4e18 */ 193 uint32_t dither = 0; /* R300_RB3D_DITHER_CTL: 0x4e50 */ 194 CB_LOCALS; 195 196 if (state->rt[0].blend_enable) 197 { 198 unsigned eqRGB = state->rt[0].rgb_func; 199 unsigned srcRGB = state->rt[0].rgb_src_factor; 200 unsigned dstRGB = state->rt[0].rgb_dst_factor; 201 202 unsigned eqA = state->rt[0].alpha_func; 203 unsigned srcA = state->rt[0].alpha_src_factor; 204 unsigned dstA = state->rt[0].alpha_dst_factor; 205 206 /* despite the name, ALPHA_BLEND_ENABLE has nothing to do with alpha, 207 * this is just the crappy D3D naming */ 208 blend_control = R300_ALPHA_BLEND_ENABLE | 209 r300_translate_blend_function(eqRGB) | 210 ( r300_translate_blend_factor(srcRGB) << R300_SRC_BLEND_SHIFT) | 211 ( r300_translate_blend_factor(dstRGB) << R300_DST_BLEND_SHIFT); 212 213 /* Optimization: some operations do not require the destination color. 214 * 215 * When SRC_ALPHA_SATURATE is used, colorbuffer reads must be enabled, 216 * otherwise blending gives incorrect results. It seems to be 217 * a hardware bug. */ 218 if (eqRGB == PIPE_BLEND_MIN || eqA == PIPE_BLEND_MIN || 219 eqRGB == PIPE_BLEND_MAX || eqA == PIPE_BLEND_MAX || 220 dstRGB != PIPE_BLENDFACTOR_ZERO || 221 dstA != PIPE_BLENDFACTOR_ZERO || 222 srcRGB == PIPE_BLENDFACTOR_DST_COLOR || 223 srcRGB == PIPE_BLENDFACTOR_DST_ALPHA || 224 srcRGB == PIPE_BLENDFACTOR_INV_DST_COLOR || 225 srcRGB == PIPE_BLENDFACTOR_INV_DST_ALPHA || 226 srcA == PIPE_BLENDFACTOR_DST_COLOR || 227 srcA == PIPE_BLENDFACTOR_DST_ALPHA || 228 srcA == PIPE_BLENDFACTOR_INV_DST_COLOR || 229 srcA == PIPE_BLENDFACTOR_INV_DST_ALPHA || 230 srcRGB == PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE) { 231 /* Enable reading from the colorbuffer. */ 232 blend_control |= R300_READ_ENABLE; 233 234 if (r300screen->caps.is_r500) { 235 /* Optimization: Depending on incoming pixels, we can 236 * conditionally disable the reading in hardware... */ 237 if (eqRGB != PIPE_BLEND_MIN && eqA != PIPE_BLEND_MIN && 238 eqRGB != PIPE_BLEND_MAX && eqA != PIPE_BLEND_MAX) { 239 /* Disable reading if SRC_ALPHA == 0. */ 240 if ((dstRGB == PIPE_BLENDFACTOR_SRC_ALPHA || 241 dstRGB == PIPE_BLENDFACTOR_ZERO) && 242 (dstA == PIPE_BLENDFACTOR_SRC_COLOR || 243 dstA == PIPE_BLENDFACTOR_SRC_ALPHA || 244 dstA == PIPE_BLENDFACTOR_ZERO)) { 245 blend_control |= R500_SRC_ALPHA_0_NO_READ; 246 } 247 248 /* Disable reading if SRC_ALPHA == 1. */ 249 if ((dstRGB == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 250 dstRGB == PIPE_BLENDFACTOR_ZERO) && 251 (dstA == PIPE_BLENDFACTOR_INV_SRC_COLOR || 252 dstA == PIPE_BLENDFACTOR_INV_SRC_ALPHA || 253 dstA == PIPE_BLENDFACTOR_ZERO)) { 254 blend_control |= R500_SRC_ALPHA_1_NO_READ; 255 } 256 } 257 } 258 } 259 260 /* Optimization: discard pixels which don't change the colorbuffer. 261 * 262 * The code below is non-trivial and some math is involved. 263 * 264 * Discarding pixels must be disabled when FP16 AA is enabled. 265 * This is a hardware bug. Also, this implementation wouldn't work 266 * with FP blending enabled and equation clamping disabled. 267 * 268 * Equations other than ADD are rarely used and therefore won't be 269 * optimized. */ 270 if ((eqRGB == PIPE_BLEND_ADD || eqRGB == PIPE_BLEND_REVERSE_SUBTRACT) && 271 (eqA == PIPE_BLEND_ADD || eqA == PIPE_BLEND_REVERSE_SUBTRACT)) { 272 /* ADD: X+Y 273 * REVERSE_SUBTRACT: Y-X 274 * 275 * The idea is: 276 * If X = src*srcFactor = 0 and Y = dst*dstFactor = 1, 277 * then CB will not be changed. 278 * 279 * Given the srcFactor and dstFactor variables, we can derive 280 * what src and dst should be equal to and discard appropriate 281 * pixels. 282 */ 283 if (blend_discard_if_src_alpha_0(srcRGB, srcA, dstRGB, dstA)) { 284 blend_control |= R300_DISCARD_SRC_PIXELS_SRC_ALPHA_0; 285 } else if (blend_discard_if_src_alpha_1(srcRGB, srcA, 286 dstRGB, dstA)) { 287 blend_control |= R300_DISCARD_SRC_PIXELS_SRC_ALPHA_1; 288 } else if (blend_discard_if_src_color_0(srcRGB, srcA, 289 dstRGB, dstA)) { 290 blend_control |= R300_DISCARD_SRC_PIXELS_SRC_COLOR_0; 291 } else if (blend_discard_if_src_color_1(srcRGB, srcA, 292 dstRGB, dstA)) { 293 blend_control |= R300_DISCARD_SRC_PIXELS_SRC_COLOR_1; 294 } else if (blend_discard_if_src_alpha_color_0(srcRGB, srcA, 295 dstRGB, dstA)) { 296 blend_control |= 297 R300_DISCARD_SRC_PIXELS_SRC_ALPHA_COLOR_0; 298 } else if (blend_discard_if_src_alpha_color_1(srcRGB, srcA, 299 dstRGB, dstA)) { 300 blend_control |= 301 R300_DISCARD_SRC_PIXELS_SRC_ALPHA_COLOR_1; 302 } 303 } 304 305 /* separate alpha */ 306 if (srcA != srcRGB || dstA != dstRGB || eqA != eqRGB) { 307 blend_control |= R300_SEPARATE_ALPHA_ENABLE; 308 alpha_blend_control = 309 r300_translate_blend_function(eqA) | 310 (r300_translate_blend_factor(srcA) << R300_SRC_BLEND_SHIFT) | 311 (r300_translate_blend_factor(dstA) << R300_DST_BLEND_SHIFT); 312 } 313 } 314 315 /* PIPE_LOGICOP_* don't need to be translated, fortunately. */ 316 if (state->logicop_enable) { 317 rop = R300_RB3D_ROPCNTL_ROP_ENABLE | 318 (state->logicop_func) << R300_RB3D_ROPCNTL_ROP_SHIFT; 319 } 320 321 /* Color channel masks for all MRTs. */ 322 color_channel_mask = bgra_cmask(state->rt[0].colormask); 323 if (r300screen->caps.is_r500 && state->independent_blend_enable) { 324 if (state->rt[1].blend_enable) { 325 color_channel_mask |= bgra_cmask(state->rt[1].colormask) << 4; 326 } 327 if (state->rt[2].blend_enable) { 328 color_channel_mask |= bgra_cmask(state->rt[2].colormask) << 8; 329 } 330 if (state->rt[3].blend_enable) { 331 color_channel_mask |= bgra_cmask(state->rt[3].colormask) << 12; 332 } 333 } 334 335 /* Neither fglrx nor classic r300 ever set this, regardless of dithering 336 * state. Since it's an optional implementation detail, we can leave it 337 * out and never dither. 338 * 339 * This could be revisited if we ever get quality or conformance hints. 340 * 341 if (state->dither) { 342 dither = R300_RB3D_DITHER_CTL_DITHER_MODE_LUT | 343 R300_RB3D_DITHER_CTL_ALPHA_DITHER_MODE_LUT; 344 } 345 */ 346 347 /* Build a command buffer. */ 348 BEGIN_CB(blend->cb, 8); 349 OUT_CB_REG(R300_RB3D_ROPCNTL, rop); 350 OUT_CB_REG_SEQ(R300_RB3D_CBLEND, 3); 351 OUT_CB(blend_control); 352 OUT_CB(alpha_blend_control); 353 OUT_CB(color_channel_mask); 354 OUT_CB_REG(R300_RB3D_DITHER_CTL, dither); 355 END_CB; 356 357 /* The same as above, but with no colorbuffer reads and writes. */ 358 BEGIN_CB(blend->cb_no_readwrite, 8); 359 OUT_CB_REG(R300_RB3D_ROPCNTL, rop); 360 OUT_CB_REG_SEQ(R300_RB3D_CBLEND, 3); 361 OUT_CB(0); 362 OUT_CB(0); 363 OUT_CB(0); 364 OUT_CB_REG(R300_RB3D_DITHER_CTL, dither); 365 END_CB; 366 367 return (void*)blend; 368} 369 370/* Bind blend state. */ 371static void r300_bind_blend_state(struct pipe_context* pipe, 372 void* state) 373{ 374 struct r300_context* r300 = r300_context(pipe); 375 376 UPDATE_STATE(state, r300->blend_state); 377} 378 379/* Free blend state. */ 380static void r300_delete_blend_state(struct pipe_context* pipe, 381 void* state) 382{ 383 FREE(state); 384} 385 386/* Convert float to 10bit integer */ 387static unsigned float_to_fixed10(float f) 388{ 389 return CLAMP((unsigned)(f * 1023.9f), 0, 1023); 390} 391 392/* Set blend color. 393 * Setup both R300 and R500 registers, figure out later which one to write. */ 394static void r300_set_blend_color(struct pipe_context* pipe, 395 const struct pipe_blend_color* color) 396{ 397 struct r300_context* r300 = r300_context(pipe); 398 struct r300_blend_color_state* state = 399 (struct r300_blend_color_state*)r300->blend_color_state.state; 400 CB_LOCALS; 401 402 if (r300->screen->caps.is_r500) { 403 /* XXX if FP16 blending is enabled, we should use the FP16 format */ 404 BEGIN_CB(state->cb, 3); 405 OUT_CB_REG_SEQ(R500_RB3D_CONSTANT_COLOR_AR, 2); 406 OUT_CB(float_to_fixed10(color->color[0]) | 407 (float_to_fixed10(color->color[3]) << 16)); 408 OUT_CB(float_to_fixed10(color->color[2]) | 409 (float_to_fixed10(color->color[1]) << 16)); 410 END_CB; 411 } else { 412 union util_color uc; 413 util_pack_color(color->color, PIPE_FORMAT_B8G8R8A8_UNORM, &uc); 414 415 BEGIN_CB(state->cb, 2); 416 OUT_CB_REG(R300_RB3D_BLEND_COLOR, uc.ui); 417 END_CB; 418 } 419 420 r300->blend_color_state.dirty = TRUE; 421} 422 423static void r300_set_clip_state(struct pipe_context* pipe, 424 const struct pipe_clip_state* state) 425{ 426 struct r300_context* r300 = r300_context(pipe); 427 struct r300_clip_state *clip = 428 (struct r300_clip_state*)r300->clip_state.state; 429 CB_LOCALS; 430 431 clip->clip = *state; 432 433 if (r300->screen->caps.has_tcl) { 434 r300->clip_state.size = 2 + !!state->nr * 3 + state->nr * 4; 435 436 BEGIN_CB(clip->cb, r300->clip_state.size); 437 if (state->nr) { 438 OUT_CB_REG(R300_VAP_PVS_VECTOR_INDX_REG, 439 (r300->screen->caps.is_r500 ? 440 R500_PVS_UCP_START : R300_PVS_UCP_START)); 441 OUT_CB_ONE_REG(R300_VAP_PVS_UPLOAD_DATA, state->nr * 4); 442 OUT_CB_TABLE(state->ucp, state->nr * 4); 443 } 444 OUT_CB_REG(R300_VAP_CLIP_CNTL, ((1 << state->nr) - 1) | 445 R300_PS_UCP_MODE_CLIP_AS_TRIFAN | 446 (state->depth_clamp ? R300_CLIP_DISABLE : 0)); 447 END_CB; 448 449 r300->clip_state.dirty = TRUE; 450 } else { 451 draw_set_clip_state(r300->draw, state); 452 } 453} 454 455static void 456r300_set_sample_mask(struct pipe_context *pipe, 457 unsigned sample_mask) 458{ 459} 460 461 462/* Create a new depth, stencil, and alpha state based on the CSO dsa state. 463 * 464 * This contains the depth buffer, stencil buffer, alpha test, and such. 465 * On the Radeon, depth and stencil buffer setup are intertwined, which is 466 * the reason for some of the strange-looking assignments across registers. */ 467static void* 468 r300_create_dsa_state(struct pipe_context* pipe, 469 const struct pipe_depth_stencil_alpha_state* state) 470{ 471 struct r300_capabilities *caps = &r300_screen(pipe->screen)->caps; 472 struct r300_dsa_state* dsa = CALLOC_STRUCT(r300_dsa_state); 473 CB_LOCALS; 474 475 dsa->dsa = *state; 476 477 /* Depth test setup. - separate write mask depth for decomp flush */ 478 if (state->depth.writemask) { 479 dsa->z_buffer_control |= R300_Z_WRITE_ENABLE; 480 } 481 482 if (state->depth.enabled) { 483 dsa->z_buffer_control |= R300_Z_ENABLE; 484 485 dsa->z_stencil_control |= 486 (r300_translate_depth_stencil_function(state->depth.func) << 487 R300_Z_FUNC_SHIFT); 488 } 489 490 /* Stencil buffer setup. */ 491 if (state->stencil[0].enabled) { 492 dsa->z_buffer_control |= R300_STENCIL_ENABLE; 493 dsa->z_stencil_control |= 494 (r300_translate_depth_stencil_function(state->stencil[0].func) << 495 R300_S_FRONT_FUNC_SHIFT) | 496 (r300_translate_stencil_op(state->stencil[0].fail_op) << 497 R300_S_FRONT_SFAIL_OP_SHIFT) | 498 (r300_translate_stencil_op(state->stencil[0].zpass_op) << 499 R300_S_FRONT_ZPASS_OP_SHIFT) | 500 (r300_translate_stencil_op(state->stencil[0].zfail_op) << 501 R300_S_FRONT_ZFAIL_OP_SHIFT); 502 503 dsa->stencil_ref_mask = 504 (state->stencil[0].valuemask << R300_STENCILMASK_SHIFT) | 505 (state->stencil[0].writemask << R300_STENCILWRITEMASK_SHIFT); 506 507 if (state->stencil[1].enabled) { 508 dsa->two_sided = TRUE; 509 510 dsa->z_buffer_control |= R300_STENCIL_FRONT_BACK; 511 dsa->z_stencil_control |= 512 (r300_translate_depth_stencil_function(state->stencil[1].func) << 513 R300_S_BACK_FUNC_SHIFT) | 514 (r300_translate_stencil_op(state->stencil[1].fail_op) << 515 R300_S_BACK_SFAIL_OP_SHIFT) | 516 (r300_translate_stencil_op(state->stencil[1].zpass_op) << 517 R300_S_BACK_ZPASS_OP_SHIFT) | 518 (r300_translate_stencil_op(state->stencil[1].zfail_op) << 519 R300_S_BACK_ZFAIL_OP_SHIFT); 520 521 dsa->stencil_ref_bf = 522 (state->stencil[1].valuemask << R300_STENCILMASK_SHIFT) | 523 (state->stencil[1].writemask << R300_STENCILWRITEMASK_SHIFT); 524 525 if (caps->is_r500) { 526 dsa->z_buffer_control |= R500_STENCIL_REFMASK_FRONT_BACK; 527 } else { 528 dsa->two_sided_stencil_ref = 529 (state->stencil[0].valuemask != state->stencil[1].valuemask || 530 state->stencil[0].writemask != state->stencil[1].writemask); 531 } 532 } 533 } 534 535 /* Alpha test setup. */ 536 if (state->alpha.enabled) { 537 dsa->alpha_function = 538 r300_translate_alpha_function(state->alpha.func) | 539 R300_FG_ALPHA_FUNC_ENABLE; 540 541 /* We could use 10bit alpha ref but who needs that? */ 542 dsa->alpha_function |= float_to_ubyte(state->alpha.ref_value); 543 544 if (caps->is_r500) 545 dsa->alpha_function |= R500_FG_ALPHA_FUNC_8BIT; 546 } 547 548 BEGIN_CB(&dsa->cb_begin, 8); 549 OUT_CB_REG(R300_FG_ALPHA_FUNC, dsa->alpha_function); 550 OUT_CB_REG_SEQ(R300_ZB_CNTL, 3); 551 OUT_CB(dsa->z_buffer_control); 552 OUT_CB(dsa->z_stencil_control); 553 OUT_CB(dsa->stencil_ref_mask); 554 OUT_CB_REG(R500_ZB_STENCILREFMASK_BF, dsa->stencil_ref_bf); 555 END_CB; 556 557 BEGIN_CB(dsa->cb_no_readwrite, 8); 558 OUT_CB_REG(R300_FG_ALPHA_FUNC, dsa->alpha_function); 559 OUT_CB_REG_SEQ(R300_ZB_CNTL, 3); 560 OUT_CB(0); 561 OUT_CB(0); 562 OUT_CB(0); 563 OUT_CB_REG(R500_ZB_STENCILREFMASK_BF, 0); 564 END_CB; 565 566 return (void*)dsa; 567} 568 569static void r300_dsa_inject_stencilref(struct r300_context *r300) 570{ 571 struct r300_dsa_state *dsa = 572 (struct r300_dsa_state*)r300->dsa_state.state; 573 574 if (!dsa) 575 return; 576 577 dsa->stencil_ref_mask = 578 (dsa->stencil_ref_mask & ~R300_STENCILREF_MASK) | 579 r300->stencil_ref.ref_value[0]; 580 dsa->stencil_ref_bf = 581 (dsa->stencil_ref_bf & ~R300_STENCILREF_MASK) | 582 r300->stencil_ref.ref_value[1]; 583} 584 585/* Bind DSA state. */ 586static void r300_bind_dsa_state(struct pipe_context* pipe, 587 void* state) 588{ 589 struct r300_context* r300 = r300_context(pipe); 590 591 if (!state) { 592 return; 593 } 594 595 UPDATE_STATE(state, r300->dsa_state); 596 597 r300->hyperz_state.dirty = TRUE; /* Will be updated before the emission. */ 598 r300_dsa_inject_stencilref(r300); 599} 600 601/* Free DSA state. */ 602static void r300_delete_dsa_state(struct pipe_context* pipe, 603 void* state) 604{ 605 FREE(state); 606} 607 608static void r300_set_stencil_ref(struct pipe_context* pipe, 609 const struct pipe_stencil_ref* sr) 610{ 611 struct r300_context* r300 = r300_context(pipe); 612 613 r300->stencil_ref = *sr; 614 615 r300_dsa_inject_stencilref(r300); 616 r300->dsa_state.dirty = TRUE; 617} 618 619static void r300_tex_set_tiling_flags(struct r300_context *r300, 620 struct r300_texture *tex, unsigned level) 621{ 622 /* Check if the macrotile flag needs to be changed. 623 * Skip changing the flags otherwise. */ 624 if (tex->desc.macrotile[tex->surface_level] != 625 tex->desc.macrotile[level]) { 626 /* Tiling determines how DRM treats the buffer data. 627 * We must flush CS when changing it if the buffer is referenced. */ 628 if (r300->rws->cs_is_buffer_referenced(r300->cs, 629 tex->buffer, R300_REF_CS)) 630 r300->context.flush(&r300->context, 0, NULL); 631 632 r300->rws->buffer_set_tiling(r300->rws, tex->buffer, 633 tex->desc.microtile, tex->desc.macrotile[level], 634 tex->desc.stride_in_bytes[0]); 635 636 tex->surface_level = level; 637 } 638} 639 640/* This switcheroo is needed just because of goddamned MACRO_SWITCH. */ 641static void r300_fb_set_tiling_flags(struct r300_context *r300, 642 const struct pipe_framebuffer_state *state) 643{ 644 unsigned i; 645 646 /* Set tiling flags for new surfaces. */ 647 for (i = 0; i < state->nr_cbufs; i++) { 648 r300_tex_set_tiling_flags(r300, 649 r300_texture(state->cbufs[i]->texture), 650 state->cbufs[i]->level); 651 } 652 if (state->zsbuf) { 653 r300_tex_set_tiling_flags(r300, 654 r300_texture(state->zsbuf->texture), 655 state->zsbuf->level); 656 } 657} 658 659static void r300_print_fb_surf_info(struct pipe_surface *surf, unsigned index, 660 const char *binding) 661{ 662 struct pipe_resource *tex = surf->texture; 663 struct r300_texture *rtex = r300_texture(tex); 664 665 fprintf(stderr, 666 "r300: %s[%i] Dim: %ix%i, Offset: %i, ZSlice: %i, " 667 "Face: %i, Level: %i, Format: %s\n" 668 669 "r300: TEX: Macro: %s, Micro: %s, Pitch: %i, " 670 "Dim: %ix%ix%i, LastLevel: %i, Format: %s\n", 671 672 binding, index, surf->width, surf->height, surf->offset, 673 surf->zslice, surf->face, surf->level, 674 util_format_short_name(surf->format), 675 676 rtex->desc.macrotile[0] ? "YES" : " NO", 677 rtex->desc.microtile ? "YES" : " NO", 678 rtex->desc.stride_in_pixels[0], 679 tex->width0, tex->height0, tex->depth0, 680 tex->last_level, util_format_short_name(tex->format)); 681} 682 683void r300_mark_fb_state_dirty(struct r300_context *r300, 684 enum r300_fb_state_change change) 685{ 686 struct pipe_framebuffer_state *state = r300->fb_state.state; 687 boolean has_hyperz = r300->rws->get_value(r300->rws, R300_CAN_HYPERZ); 688 689 /* What is marked as dirty depends on the enum r300_fb_state_change. */ 690 r300->gpu_flush.dirty = TRUE; 691 r300->fb_state.dirty = TRUE; 692 r300->hyperz_state.dirty = TRUE; 693 694 if (change == R300_CHANGED_FB_STATE) { 695 r300->aa_state.dirty = TRUE; 696 r300->fb_state_pipelined.dirty = TRUE; 697 } 698 699 /* Now compute the fb_state atom size. */ 700 r300->fb_state.size = 2 + (8 * state->nr_cbufs); 701 702 if (r300->cbzb_clear) 703 r300->fb_state.size += 10; 704 else if (state->zsbuf) { 705 r300->fb_state.size += 10; 706 if (has_hyperz) 707 r300->fb_state.size += r300->screen->caps.hiz_ram ? 8 : 4; 708 } 709 710 /* The size of the rest of atoms stays the same. */ 711} 712 713static void 714 r300_set_framebuffer_state(struct pipe_context* pipe, 715 const struct pipe_framebuffer_state* state) 716{ 717 struct r300_context* r300 = r300_context(pipe); 718 struct r300_aa_state *aa = (struct r300_aa_state*)r300->aa_state.state; 719 struct pipe_framebuffer_state *old_state = r300->fb_state.state; 720 boolean has_hyperz = r300->rws->get_value(r300->rws, R300_CAN_HYPERZ); 721 unsigned max_width, max_height, i; 722 uint32_t zbuffer_bpp = 0; 723 int blocksize; 724 725 if (r300->screen->caps.is_r500) { 726 max_width = max_height = 4096; 727 } else if (r300->screen->caps.is_r400) { 728 max_width = max_height = 4021; 729 } else { 730 max_width = max_height = 2560; 731 } 732 733 if (state->width > max_width || state->height > max_height) { 734 fprintf(stderr, "r300: Implementation error: Render targets are too " 735 "big in %s, refusing to bind framebuffer state!\n", __FUNCTION__); 736 return; 737 } 738 739 /* If nr_cbufs is changed from zero to non-zero or vice versa... */ 740 if (!!old_state->nr_cbufs != !!state->nr_cbufs) { 741 r300->blend_state.dirty = TRUE; 742 } 743 /* If zsbuf is set from NULL to non-NULL or vice versa.. */ 744 if (!!old_state->zsbuf != !!state->zsbuf) { 745 r300->dsa_state.dirty = TRUE; 746 } 747 748 /* The tiling flags are dependent on the surface miplevel, unfortunately. */ 749 r300_fb_set_tiling_flags(r300, state); 750 751 util_copy_framebuffer_state(r300->fb_state.state, state); 752 753 r300_mark_fb_state_dirty(r300, R300_CHANGED_FB_STATE); 754 755 r300->z_compression = false; 756 757 if (state->zsbuf) { 758 blocksize = util_format_get_blocksize(state->zsbuf->texture->format); 759 switch (blocksize) { 760 case 2: 761 zbuffer_bpp = 16; 762 break; 763 case 4: 764 zbuffer_bpp = 24; 765 break; 766 } 767 if (has_hyperz) { 768 struct r300_surface *zs_surf = r300_surface(state->zsbuf); 769 struct r300_texture *tex; 770 int compress = r300->screen->caps.is_rv350 ? RV350_Z_COMPRESS_88 : R300_Z_COMPRESS_44; 771 int level = zs_surf->base.level; 772 773 tex = r300_texture(zs_surf->base.texture); 774 775 /* work out whether we can support hiz on this buffer */ 776 r300_hiz_alloc_block(r300, zs_surf); 777 778 /* work out whether we can support zmask features on this buffer */ 779 r300_zmask_alloc_block(r300, zs_surf, compress); 780 781 if (tex->zmask_mem[level]) { 782 /* compression causes hangs on 16-bit */ 783 if (zbuffer_bpp == 24) 784 r300->z_compression = compress; 785 } 786 DBG(r300, DBG_HYPERZ, 787 "hyper-z features: hiz: %d @ %08x z-compression: %d z-fastfill: %d @ %08x\n", tex->hiz_mem[level] ? 1 : 0, 788 tex->hiz_mem[level] ? tex->hiz_mem[level]->ofs : 0xdeadbeef, 789 r300->z_compression, tex->zmask_mem[level] ? 1 : 0, 790 tex->zmask_mem[level] ? tex->zmask_mem[level]->ofs : 0xdeadbeef); 791 } 792 793 /* Polygon offset depends on the zbuffer bit depth. */ 794 if (r300->zbuffer_bpp != zbuffer_bpp) { 795 r300->zbuffer_bpp = zbuffer_bpp; 796 797 if (r300->polygon_offset_enabled) 798 r300->rs_state.dirty = TRUE; 799 } 800 } 801 802 /* Set up AA config. */ 803 if (r300->rws->get_value(r300->rws, R300_VID_DRM_2_3_0)) { 804 if (state->nr_cbufs && state->cbufs[0]->texture->nr_samples > 1) { 805 aa->aa_config = R300_GB_AA_CONFIG_AA_ENABLE; 806 807 switch (state->cbufs[0]->texture->nr_samples) { 808 case 2: 809 aa->aa_config |= R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_2; 810 break; 811 case 3: 812 aa->aa_config |= R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_3; 813 break; 814 case 4: 815 aa->aa_config |= R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_4; 816 break; 817 case 6: 818 aa->aa_config |= R300_GB_AA_CONFIG_NUM_AA_SUBSAMPLES_6; 819 break; 820 } 821 } else { 822 aa->aa_config = 0; 823 } 824 } 825 826 if (DBG_ON(r300, DBG_FB)) { 827 fprintf(stderr, "r300: set_framebuffer_state:\n"); 828 for (i = 0; i < state->nr_cbufs; i++) { 829 r300_print_fb_surf_info(state->cbufs[i], i, "CB"); 830 } 831 if (state->zsbuf) { 832 r300_print_fb_surf_info(state->zsbuf, 0, "ZB"); 833 } 834 } 835} 836 837/* Create fragment shader state. */ 838static void* r300_create_fs_state(struct pipe_context* pipe, 839 const struct pipe_shader_state* shader) 840{ 841 struct r300_fragment_shader* fs = NULL; 842 843 fs = (struct r300_fragment_shader*)CALLOC_STRUCT(r300_fragment_shader); 844 845 /* Copy state directly into shader. */ 846 fs->state = *shader; 847 fs->state.tokens = tgsi_dup_tokens(shader->tokens); 848 849 return (void*)fs; 850} 851 852void r300_mark_fs_code_dirty(struct r300_context *r300) 853{ 854 struct r300_fragment_shader* fs = r300_fs(r300); 855 856 r300->fs.dirty = TRUE; 857 r300->fs_rc_constant_state.dirty = TRUE; 858 r300->fs_constants.dirty = TRUE; 859 r300->fs.size = fs->shader->cb_code_size; 860 861 if (r300->screen->caps.is_r500) { 862 r300->fs_rc_constant_state.size = fs->shader->rc_state_count * 7; 863 r300->fs_constants.size = fs->shader->externals_count * 4 + 3; 864 } else { 865 r300->fs_rc_constant_state.size = fs->shader->rc_state_count * 5; 866 r300->fs_constants.size = fs->shader->externals_count * 4 + 1; 867 } 868 869 ((struct r300_constant_buffer*)r300->fs_constants.state)->remap_table = 870 fs->shader->code.constants_remap_table; 871} 872 873/* Bind fragment shader state. */ 874static void r300_bind_fs_state(struct pipe_context* pipe, void* shader) 875{ 876 struct r300_context* r300 = r300_context(pipe); 877 struct r300_fragment_shader* fs = (struct r300_fragment_shader*)shader; 878 879 if (fs == NULL) { 880 r300->fs.state = NULL; 881 return; 882 } 883 884 r300->fs.state = fs; 885 r300_pick_fragment_shader(r300); 886 r300_mark_fs_code_dirty(r300); 887 888 r300->rs_block_state.dirty = TRUE; /* Will be updated before the emission. */ 889} 890 891/* Delete fragment shader state. */ 892static void r300_delete_fs_state(struct pipe_context* pipe, void* shader) 893{ 894 struct r300_fragment_shader* fs = (struct r300_fragment_shader*)shader; 895 struct r300_fragment_shader_code *tmp, *ptr = fs->first; 896 897 while (ptr) { 898 tmp = ptr; 899 ptr = ptr->next; 900 rc_constants_destroy(&tmp->code.constants); 901 FREE(tmp->cb_code); 902 FREE(tmp); 903 } 904 FREE((void*)fs->state.tokens); 905 FREE(shader); 906} 907 908static void r300_set_polygon_stipple(struct pipe_context* pipe, 909 const struct pipe_poly_stipple* state) 910{ 911 /* XXX no idea how to set this up, but not terribly important */ 912} 913 914/* Create a new rasterizer state based on the CSO rasterizer state. 915 * 916 * This is a very large chunk of state, and covers most of the graphics 917 * backend (GB), geometry assembly (GA), and setup unit (SU) blocks. 918 * 919 * In a not entirely unironic sidenote, this state has nearly nothing to do 920 * with the actual block on the Radeon called the rasterizer (RS). */ 921static void* r300_create_rs_state(struct pipe_context* pipe, 922 const struct pipe_rasterizer_state* state) 923{ 924 struct r300_rs_state* rs = CALLOC_STRUCT(r300_rs_state); 925 float psiz; 926 uint32_t vap_control_status; /* R300_VAP_CNTL_STATUS: 0x2140 */ 927 uint32_t point_size; /* R300_GA_POINT_SIZE: 0x421c */ 928 uint32_t point_minmax; /* R300_GA_POINT_MINMAX: 0x4230 */ 929 uint32_t line_control; /* R300_GA_LINE_CNTL: 0x4234 */ 930 uint32_t polygon_offset_enable; /* R300_SU_POLY_OFFSET_ENABLE: 0x42b4 */ 931 uint32_t cull_mode; /* R300_SU_CULL_MODE: 0x42b8 */ 932 uint32_t line_stipple_config; /* R300_GA_LINE_STIPPLE_CONFIG: 0x4328 */ 933 uint32_t line_stipple_value; /* R300_GA_LINE_STIPPLE_VALUE: 0x4260 */ 934 uint32_t polygon_mode; /* R300_GA_POLY_MODE: 0x4288 */ 935 uint32_t clip_rule; /* R300_SC_CLIP_RULE: 0x43D0 */ 936 937 /* Point sprites texture coordinates, 0: lower left, 1: upper right */ 938 float point_texcoord_left = 0; /* R300_GA_POINT_S0: 0x4200 */ 939 float point_texcoord_bottom = 0;/* R300_GA_POINT_T0: 0x4204 */ 940 float point_texcoord_right = 1; /* R300_GA_POINT_S1: 0x4208 */ 941 float point_texcoord_top = 0; /* R300_GA_POINT_T1: 0x420c */ 942 CB_LOCALS; 943 944 /* Copy rasterizer state. */ 945 rs->rs = *state; 946 rs->rs_draw = *state; 947 948 rs->rs.sprite_coord_enable = state->point_quad_rasterization * 949 state->sprite_coord_enable; 950 951 /* Override some states for Draw. */ 952 rs->rs_draw.sprite_coord_enable = 0; /* We can do this in HW. */ 953 954#ifdef PIPE_ARCH_LITTLE_ENDIAN 955 vap_control_status = R300_VC_NO_SWAP; 956#else 957 vap_control_status = R300_VC_32BIT_SWAP; 958#endif 959 960 /* If no TCL engine is present, turn off the HW TCL. */ 961 if (!r300_screen(pipe->screen)->caps.has_tcl) { 962 vap_control_status |= R300_VAP_TCL_BYPASS; 963 } 964 965 /* Point size width and height. */ 966 point_size = 967 pack_float_16_6x(state->point_size) | 968 (pack_float_16_6x(state->point_size) << R300_POINTSIZE_X_SHIFT); 969 970 /* Point size clamping. */ 971 if (state->point_size_per_vertex) { 972 /* Per-vertex point size. 973 * Clamp to [0, max FB size] */ 974 psiz = pipe->screen->get_paramf(pipe->screen, 975 PIPE_CAP_MAX_POINT_WIDTH); 976 point_minmax = 977 pack_float_16_6x(psiz) << R300_GA_POINT_MINMAX_MAX_SHIFT; 978 } else { 979 /* We cannot disable the point-size vertex output, 980 * so clamp it. */ 981 psiz = state->point_size; 982 point_minmax = 983 (pack_float_16_6x(psiz) << R300_GA_POINT_MINMAX_MIN_SHIFT) | 984 (pack_float_16_6x(psiz) << R300_GA_POINT_MINMAX_MAX_SHIFT); 985 } 986 987 /* Line control. */ 988 line_control = pack_float_16_6x(state->line_width) | 989 R300_GA_LINE_CNTL_END_TYPE_COMP; 990 991 /* Enable polygon mode */ 992 polygon_mode = 0; 993 if (state->fill_front != PIPE_POLYGON_MODE_FILL || 994 state->fill_back != PIPE_POLYGON_MODE_FILL) { 995 polygon_mode = R300_GA_POLY_MODE_DUAL; 996 } 997 998 /* Front face */ 999 if (state->front_ccw) 1000 cull_mode = R300_FRONT_FACE_CCW; 1001 else 1002 cull_mode = R300_FRONT_FACE_CW; 1003 1004 /* Polygon offset */ 1005 polygon_offset_enable = 0; 1006 if (util_get_offset(state, state->fill_front)) { 1007 polygon_offset_enable |= R300_FRONT_ENABLE; 1008 } 1009 if (util_get_offset(state, state->fill_back)) { 1010 polygon_offset_enable |= R300_BACK_ENABLE; 1011 } 1012 1013 rs->polygon_offset_enable = polygon_offset_enable != 0; 1014 1015 /* Polygon mode */ 1016 if (polygon_mode) { 1017 polygon_mode |= 1018 r300_translate_polygon_mode_front(state->fill_front); 1019 polygon_mode |= 1020 r300_translate_polygon_mode_back(state->fill_back); 1021 } 1022 1023 if (state->cull_face & PIPE_FACE_FRONT) { 1024 cull_mode |= R300_CULL_FRONT; 1025 } 1026 if (state->cull_face & PIPE_FACE_BACK) { 1027 cull_mode |= R300_CULL_BACK; 1028 } 1029 1030 if (state->line_stipple_enable) { 1031 line_stipple_config = 1032 R300_GA_LINE_STIPPLE_CONFIG_LINE_RESET_LINE | 1033 (fui((float)state->line_stipple_factor) & 1034 R300_GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_MASK); 1035 /* XXX this might need to be scaled up */ 1036 line_stipple_value = state->line_stipple_pattern; 1037 } else { 1038 line_stipple_config = 0; 1039 line_stipple_value = 0; 1040 } 1041 1042 if (state->flatshade) { 1043 rs->color_control = R300_SHADE_MODEL_FLAT; 1044 } else { 1045 rs->color_control = R300_SHADE_MODEL_SMOOTH; 1046 } 1047 1048 clip_rule = state->scissor ? 0xAAAA : 0xFFFF; 1049 1050 /* Point sprites coord mode */ 1051 if (rs->rs.sprite_coord_enable) { 1052 switch (state->sprite_coord_mode) { 1053 case PIPE_SPRITE_COORD_UPPER_LEFT: 1054 point_texcoord_top = 0.0f; 1055 point_texcoord_bottom = 1.0f; 1056 break; 1057 case PIPE_SPRITE_COORD_LOWER_LEFT: 1058 point_texcoord_top = 1.0f; 1059 point_texcoord_bottom = 0.0f; 1060 break; 1061 } 1062 } 1063 1064 /* Build the main command buffer. */ 1065 BEGIN_CB(rs->cb_main, RS_STATE_MAIN_SIZE); 1066 OUT_CB_REG(R300_VAP_CNTL_STATUS, vap_control_status); 1067 OUT_CB_REG(R300_GA_POINT_SIZE, point_size); 1068 OUT_CB_REG_SEQ(R300_GA_POINT_MINMAX, 2); 1069 OUT_CB(point_minmax); 1070 OUT_CB(line_control); 1071 OUT_CB_REG_SEQ(R300_SU_POLY_OFFSET_ENABLE, 2); 1072 OUT_CB(polygon_offset_enable); 1073 rs->cull_mode_index = 9; 1074 OUT_CB(cull_mode); 1075 OUT_CB_REG(R300_GA_LINE_STIPPLE_CONFIG, line_stipple_config); 1076 OUT_CB_REG(R300_GA_LINE_STIPPLE_VALUE, line_stipple_value); 1077 OUT_CB_REG(R300_GA_POLY_MODE, polygon_mode); 1078 OUT_CB_REG(R300_SC_CLIP_RULE, clip_rule); 1079 OUT_CB_REG_SEQ(R300_GA_POINT_S0, 4); 1080 OUT_CB_32F(point_texcoord_left); 1081 OUT_CB_32F(point_texcoord_bottom); 1082 OUT_CB_32F(point_texcoord_right); 1083 OUT_CB_32F(point_texcoord_top); 1084 END_CB; 1085 1086 /* Build the two command buffers for polygon offset setup. */ 1087 if (polygon_offset_enable) { 1088 float scale = state->offset_scale * 12; 1089 float offset = state->offset_units * 4; 1090 1091 BEGIN_CB(rs->cb_poly_offset_zb16, 5); 1092 OUT_CB_REG_SEQ(R300_SU_POLY_OFFSET_FRONT_SCALE, 4); 1093 OUT_CB_32F(scale); 1094 OUT_CB_32F(offset); 1095 OUT_CB_32F(scale); 1096 OUT_CB_32F(offset); 1097 END_CB; 1098 1099 offset = state->offset_units * 2; 1100 1101 BEGIN_CB(rs->cb_poly_offset_zb24, 5); 1102 OUT_CB_REG_SEQ(R300_SU_POLY_OFFSET_FRONT_SCALE, 4); 1103 OUT_CB_32F(scale); 1104 OUT_CB_32F(offset); 1105 OUT_CB_32F(scale); 1106 OUT_CB_32F(offset); 1107 END_CB; 1108 } 1109 1110 return (void*)rs; 1111} 1112 1113/* Bind rasterizer state. */ 1114static void r300_bind_rs_state(struct pipe_context* pipe, void* state) 1115{ 1116 struct r300_context* r300 = r300_context(pipe); 1117 struct r300_rs_state* rs = (struct r300_rs_state*)state; 1118 int last_sprite_coord_enable = r300->sprite_coord_enable; 1119 boolean last_two_sided_color = r300->two_sided_color; 1120 1121 if (r300->draw && rs) { 1122 draw_set_rasterizer_state(r300->draw, &rs->rs_draw, state); 1123 } 1124 1125 if (rs) { 1126 r300->polygon_offset_enabled = rs->polygon_offset_enable; 1127 r300->sprite_coord_enable = rs->rs.sprite_coord_enable; 1128 r300->two_sided_color = rs->rs.light_twoside; 1129 } else { 1130 r300->polygon_offset_enabled = FALSE; 1131 r300->sprite_coord_enable = 0; 1132 r300->two_sided_color = FALSE; 1133 } 1134 1135 UPDATE_STATE(state, r300->rs_state); 1136 r300->rs_state.size = RS_STATE_MAIN_SIZE + (r300->polygon_offset_enabled ? 5 : 0); 1137 1138 if (last_sprite_coord_enable != r300->sprite_coord_enable || 1139 last_two_sided_color != r300->two_sided_color) { 1140 r300->rs_block_state.dirty = TRUE; 1141 } 1142} 1143 1144/* Free rasterizer state. */ 1145static void r300_delete_rs_state(struct pipe_context* pipe, void* state) 1146{ 1147 FREE(state); 1148} 1149 1150static void* 1151 r300_create_sampler_state(struct pipe_context* pipe, 1152 const struct pipe_sampler_state* state) 1153{ 1154 struct r300_context* r300 = r300_context(pipe); 1155 struct r300_sampler_state* sampler = CALLOC_STRUCT(r300_sampler_state); 1156 boolean is_r500 = r300->screen->caps.is_r500; 1157 int lod_bias; 1158 1159 sampler->state = *state; 1160 1161 /* r300 doesn't handle CLAMP and MIRROR_CLAMP correctly when either MAG 1162 * or MIN filter is NEAREST. Since texwrap produces same results 1163 * for CLAMP and CLAMP_TO_EDGE, we use them instead. */ 1164 if (sampler->state.min_img_filter == PIPE_TEX_FILTER_NEAREST || 1165 sampler->state.mag_img_filter == PIPE_TEX_FILTER_NEAREST) { 1166 /* Wrap S. */ 1167 if (sampler->state.wrap_s == PIPE_TEX_WRAP_CLAMP) 1168 sampler->state.wrap_s = PIPE_TEX_WRAP_CLAMP_TO_EDGE; 1169 else if (sampler->state.wrap_s == PIPE_TEX_WRAP_MIRROR_CLAMP) 1170 sampler->state.wrap_s = PIPE_TEX_WRAP_MIRROR_CLAMP_TO_EDGE; 1171 1172 /* Wrap T. */ 1173 if (sampler->state.wrap_t == PIPE_TEX_WRAP_CLAMP) 1174 sampler->state.wrap_t = PIPE_TEX_WRAP_CLAMP_TO_EDGE; 1175 else if (sampler->state.wrap_t == PIPE_TEX_WRAP_MIRROR_CLAMP) 1176 sampler->state.wrap_t = PIPE_TEX_WRAP_MIRROR_CLAMP_TO_EDGE; 1177 1178 /* Wrap R. */ 1179 if (sampler->state.wrap_r == PIPE_TEX_WRAP_CLAMP) 1180 sampler->state.wrap_r = PIPE_TEX_WRAP_CLAMP_TO_EDGE; 1181 else if (sampler->state.wrap_r == PIPE_TEX_WRAP_MIRROR_CLAMP) 1182 sampler->state.wrap_r = PIPE_TEX_WRAP_MIRROR_CLAMP_TO_EDGE; 1183 } 1184 1185 sampler->filter0 |= 1186 (r300_translate_wrap(sampler->state.wrap_s) << R300_TX_WRAP_S_SHIFT) | 1187 (r300_translate_wrap(sampler->state.wrap_t) << R300_TX_WRAP_T_SHIFT) | 1188 (r300_translate_wrap(sampler->state.wrap_r) << R300_TX_WRAP_R_SHIFT); 1189 1190 sampler->filter0 |= r300_translate_tex_filters(state->min_img_filter, 1191 state->mag_img_filter, 1192 state->min_mip_filter, 1193 state->max_anisotropy > 0); 1194 1195 sampler->filter0 |= r300_anisotropy(state->max_anisotropy); 1196 1197 /* Unfortunately, r300-r500 don't support floating-point mipmap lods. */ 1198 /* We must pass these to the merge function to clamp them properly. */ 1199 sampler->min_lod = (unsigned)MAX2(state->min_lod, 0); 1200 sampler->max_lod = (unsigned)MAX2(ceilf(state->max_lod), 0); 1201 1202 lod_bias = CLAMP((int)(state->lod_bias * 32 + 1), -(1 << 9), (1 << 9) - 1); 1203 1204 sampler->filter1 |= (lod_bias << R300_LOD_BIAS_SHIFT) & R300_LOD_BIAS_MASK; 1205 1206 /* This is very high quality anisotropic filtering for R5xx. 1207 * It's good for benchmarking the performance of texturing but 1208 * in practice we don't want to slow down the driver because it's 1209 * a pretty good performance killer. Feel free to play with it. */ 1210 if (DBG_ON(r300, DBG_ANISOHQ) && is_r500) { 1211 sampler->filter1 |= r500_anisotropy(state->max_anisotropy); 1212 } 1213 1214 /* R500-specific fixups and optimizations */ 1215 if (r300->screen->caps.is_r500) { 1216 sampler->filter1 |= R500_BORDER_FIX; 1217 } 1218 1219 return (void*)sampler; 1220} 1221 1222static void r300_bind_sampler_states(struct pipe_context* pipe, 1223 unsigned count, 1224 void** states) 1225{ 1226 struct r300_context* r300 = r300_context(pipe); 1227 struct r300_textures_state* state = 1228 (struct r300_textures_state*)r300->textures_state.state; 1229 unsigned tex_units = r300->screen->caps.num_tex_units; 1230 1231 if (count > tex_units) { 1232 return; 1233 } 1234 1235 memcpy(state->sampler_states, states, sizeof(void*) * count); 1236 state->sampler_state_count = count; 1237 1238 r300->textures_state.dirty = TRUE; 1239} 1240 1241static void r300_lacks_vertex_textures(struct pipe_context* pipe, 1242 unsigned count, 1243 void** states) 1244{ 1245} 1246 1247static void r300_delete_sampler_state(struct pipe_context* pipe, void* state) 1248{ 1249 FREE(state); 1250} 1251 1252static uint32_t r300_assign_texture_cache_region(unsigned index, unsigned num) 1253{ 1254 /* This looks like a hack, but I believe it's suppose to work like 1255 * that. To illustrate how this works, let's assume you have 5 textures. 1256 * From docs, 5 and the successive numbers are: 1257 * 1258 * FOURTH_1 = 5 1259 * FOURTH_2 = 6 1260 * FOURTH_3 = 7 1261 * EIGHTH_0 = 8 1262 * EIGHTH_1 = 9 1263 * 1264 * First 3 textures will get 3/4 of size of the cache, divived evenly 1265 * between them. The last 1/4 of the cache must be divided between 1266 * the last 2 textures, each will therefore get 1/8 of the cache. 1267 * Why not just to use "5 + texture_index" ? 1268 * 1269 * This simple trick works for all "num" <= 16. 1270 */ 1271 if (num <= 1) 1272 return R300_TX_CACHE(R300_TX_CACHE_WHOLE); 1273 else 1274 return R300_TX_CACHE(num + index); 1275} 1276 1277static void r300_set_fragment_sampler_views(struct pipe_context* pipe, 1278 unsigned count, 1279 struct pipe_sampler_view** views) 1280{ 1281 struct r300_context* r300 = r300_context(pipe); 1282 struct r300_textures_state* state = 1283 (struct r300_textures_state*)r300->textures_state.state; 1284 struct r300_texture *texture; 1285 unsigned i, real_num_views = 0, view_index = 0; 1286 unsigned tex_units = r300->screen->caps.num_tex_units; 1287 boolean dirty_tex = FALSE; 1288 1289 if (count > tex_units) { 1290 return; 1291 } 1292 1293 /* Calculate the real number of views. */ 1294 for (i = 0; i < count; i++) { 1295 if (views[i]) 1296 real_num_views++; 1297 } 1298 1299 for (i = 0; i < count; i++) { 1300 if (&state->sampler_views[i]->base != views[i]) { 1301 pipe_sampler_view_reference( 1302 (struct pipe_sampler_view**)&state->sampler_views[i], 1303 views[i]); 1304 1305 if (!views[i]) { 1306 continue; 1307 } 1308 1309 /* A new sampler view (= texture)... */ 1310 dirty_tex = TRUE; 1311 1312 /* Set the texrect factor in the fragment shader. 1313 * Needed for RECT and NPOT fallback. */ 1314 texture = r300_texture(views[i]->texture); 1315 if (texture->desc.is_npot) { 1316 r300->fs_rc_constant_state.dirty = TRUE; 1317 } 1318 1319 state->sampler_views[i]->texcache_region = 1320 r300_assign_texture_cache_region(view_index, real_num_views); 1321 view_index++; 1322 } 1323 } 1324 1325 for (i = count; i < tex_units; i++) { 1326 if (state->sampler_views[i]) { 1327 pipe_sampler_view_reference( 1328 (struct pipe_sampler_view**)&state->sampler_views[i], 1329 NULL); 1330 } 1331 } 1332 1333 state->sampler_view_count = count; 1334 1335 r300->textures_state.dirty = TRUE; 1336 1337 if (dirty_tex) { 1338 r300->texture_cache_inval.dirty = TRUE; 1339 } 1340} 1341 1342static struct pipe_sampler_view * 1343r300_create_sampler_view(struct pipe_context *pipe, 1344 struct pipe_resource *texture, 1345 const struct pipe_sampler_view *templ) 1346{ 1347 struct r300_sampler_view *view = CALLOC_STRUCT(r300_sampler_view); 1348 struct r300_texture *tex = r300_texture(texture); 1349 boolean is_r500 = r300_screen(pipe->screen)->caps.is_r500; 1350 1351 if (view) { 1352 view->base = *templ; 1353 view->base.reference.count = 1; 1354 view->base.context = pipe; 1355 view->base.texture = NULL; 1356 pipe_resource_reference(&view->base.texture, texture); 1357 1358 view->swizzle[0] = templ->swizzle_r; 1359 view->swizzle[1] = templ->swizzle_g; 1360 view->swizzle[2] = templ->swizzle_b; 1361 view->swizzle[3] = templ->swizzle_a; 1362 1363 view->format = tex->tx_format; 1364 view->format.format1 |= r300_translate_texformat(templ->format, 1365 view->swizzle, 1366 is_r500); 1367 if (is_r500) { 1368 view->format.format2 |= r500_tx_format_msb_bit(templ->format); 1369 } 1370 } 1371 1372 return (struct pipe_sampler_view*)view; 1373} 1374 1375static void 1376r300_sampler_view_destroy(struct pipe_context *pipe, 1377 struct pipe_sampler_view *view) 1378{ 1379 pipe_resource_reference(&view->texture, NULL); 1380 FREE(view); 1381} 1382 1383static void r300_set_scissor_state(struct pipe_context* pipe, 1384 const struct pipe_scissor_state* state) 1385{ 1386 struct r300_context* r300 = r300_context(pipe); 1387 1388 memcpy(r300->scissor_state.state, state, 1389 sizeof(struct pipe_scissor_state)); 1390 1391 r300->scissor_state.dirty = TRUE; 1392} 1393 1394static void r300_set_viewport_state(struct pipe_context* pipe, 1395 const struct pipe_viewport_state* state) 1396{ 1397 struct r300_context* r300 = r300_context(pipe); 1398 struct r300_viewport_state* viewport = 1399 (struct r300_viewport_state*)r300->viewport_state.state; 1400 1401 r300->viewport = *state; 1402 1403 if (r300->draw) { 1404 draw_set_viewport_state(r300->draw, state); 1405 viewport->vte_control = R300_VTX_XY_FMT | R300_VTX_Z_FMT; 1406 return; 1407 } 1408 1409 /* Do the transform in HW. */ 1410 viewport->vte_control = R300_VTX_W0_FMT; 1411 1412 if (state->scale[0] != 1.0f) { 1413 viewport->xscale = state->scale[0]; 1414 viewport->vte_control |= R300_VPORT_X_SCALE_ENA; 1415 } 1416 if (state->scale[1] != 1.0f) { 1417 viewport->yscale = state->scale[1]; 1418 viewport->vte_control |= R300_VPORT_Y_SCALE_ENA; 1419 } 1420 if (state->scale[2] != 1.0f) { 1421 viewport->zscale = state->scale[2]; 1422 viewport->vte_control |= R300_VPORT_Z_SCALE_ENA; 1423 } 1424 if (state->translate[0] != 0.0f) { 1425 viewport->xoffset = state->translate[0]; 1426 viewport->vte_control |= R300_VPORT_X_OFFSET_ENA; 1427 } 1428 if (state->translate[1] != 0.0f) { 1429 viewport->yoffset = state->translate[1]; 1430 viewport->vte_control |= R300_VPORT_Y_OFFSET_ENA; 1431 } 1432 if (state->translate[2] != 0.0f) { 1433 viewport->zoffset = state->translate[2]; 1434 viewport->vte_control |= R300_VPORT_Z_OFFSET_ENA; 1435 } 1436 1437 r300->viewport_state.dirty = TRUE; 1438 if (r300->fs.state && r300_fs(r300)->shader->inputs.wpos != ATTR_UNUSED) { 1439 r300->fs_rc_constant_state.dirty = TRUE; 1440 } 1441} 1442 1443static void r300_set_vertex_buffers(struct pipe_context* pipe, 1444 unsigned count, 1445 const struct pipe_vertex_buffer* buffers) 1446{ 1447 struct r300_context* r300 = r300_context(pipe); 1448 struct pipe_vertex_buffer *vbo; 1449 unsigned i, max_index = (1 << 24) - 1; 1450 boolean any_user_buffer = FALSE; 1451 1452 if (count == r300->vertex_buffer_count && 1453 memcmp(r300->vertex_buffer, buffers, 1454 sizeof(struct pipe_vertex_buffer) * count) == 0) { 1455 return; 1456 } 1457 1458 if (r300->screen->caps.has_tcl) { 1459 /* HW TCL. */ 1460 r300->incompatible_vb_layout = FALSE; 1461 1462 /* Check if the strides and offsets are aligned to the size of DWORD. */ 1463 for (i = 0; i < count; i++) { 1464 if (buffers[i].buffer) { 1465 if (buffers[i].stride % 4 != 0 || 1466 buffers[i].buffer_offset % 4 != 0) { 1467 r300->incompatible_vb_layout = TRUE; 1468 break; 1469 } 1470 } 1471 } 1472 1473 for (i = 0; i < count; i++) { 1474 /* Why, yes, I AM casting away constness. How did you know? */ 1475 vbo = (struct pipe_vertex_buffer*)&buffers[i]; 1476 1477 /* Skip NULL buffers */ 1478 if (!buffers[i].buffer) { 1479 continue; 1480 } 1481 1482 if (r300_buffer_is_user_buffer(vbo->buffer)) { 1483 any_user_buffer = TRUE; 1484 } 1485 1486 if (vbo->max_index == ~0) { 1487 /* if no VBO stride then only one vertex value so max index is 1 */ 1488 /* should think about converting to VS constants like svga does */ 1489 if (!vbo->stride) 1490 vbo->max_index = 1; 1491 else 1492 vbo->max_index = 1493 (vbo->buffer->width0 - vbo->buffer_offset) / vbo->stride; 1494 } 1495 1496 max_index = MIN2(vbo->max_index, max_index); 1497 } 1498 1499 r300->any_user_vbs = any_user_buffer; 1500 r300->vertex_buffer_max_index = max_index; 1501 1502 } else { 1503 /* SW TCL. */ 1504 draw_set_vertex_buffers(r300->draw, count, buffers); 1505 } 1506 1507 /* Common code. */ 1508 for (i = 0; i < count; i++) { 1509 /* Reference our buffer. */ 1510 pipe_resource_reference(&r300->vertex_buffer[i].buffer, buffers[i].buffer); 1511 } 1512 for (; i < r300->vertex_buffer_count; i++) { 1513 /* Dereference any old buffers. */ 1514 pipe_resource_reference(&r300->vertex_buffer[i].buffer, NULL); 1515 } 1516 1517 memcpy(r300->vertex_buffer, buffers, 1518 sizeof(struct pipe_vertex_buffer) * count); 1519 r300->vertex_buffer_count = count; 1520} 1521 1522static void r300_set_index_buffer(struct pipe_context* pipe, 1523 const struct pipe_index_buffer *ib) 1524{ 1525 struct r300_context* r300 = r300_context(pipe); 1526 1527 if (ib) { 1528 pipe_resource_reference(&r300->index_buffer.buffer, ib->buffer); 1529 memcpy(&r300->index_buffer, ib, sizeof(r300->index_buffer)); 1530 } 1531 else { 1532 pipe_resource_reference(&r300->index_buffer.buffer, NULL); 1533 memset(&r300->index_buffer, 0, sizeof(r300->index_buffer)); 1534 } 1535 1536 if (r300->screen->caps.has_tcl) { 1537 /* TODO make this more like a state */ 1538 } 1539 else { 1540 draw_set_index_buffer(r300->draw, ib); 1541 } 1542} 1543 1544/* Initialize the PSC tables. */ 1545static void r300_vertex_psc(struct r300_vertex_element_state *velems) 1546{ 1547 struct r300_vertex_stream_state *vstream = &velems->vertex_stream; 1548 uint16_t type, swizzle; 1549 enum pipe_format format; 1550 unsigned i; 1551 1552 if (velems->count > 16) { 1553 fprintf(stderr, "r300: More than 16 vertex elements are not supported," 1554 " requested %i, using 16.\n", velems->count); 1555 velems->count = 16; 1556 } 1557 1558 /* Vertex shaders have no semantics on their inputs, 1559 * so PSC should just route stuff based on the vertex elements, 1560 * and not on attrib information. */ 1561 for (i = 0; i < velems->count; i++) { 1562 format = velems->hw_format[i]; 1563 1564 type = r300_translate_vertex_data_type(format); 1565 if (type == R300_INVALID_FORMAT) { 1566 fprintf(stderr, "r300: Bad vertex format %s.\n", 1567 util_format_short_name(format)); 1568 assert(0); 1569 abort(); 1570 } 1571 1572 type |= i << R300_DST_VEC_LOC_SHIFT; 1573 swizzle = r300_translate_vertex_data_swizzle(format); 1574 1575 if (i & 1) { 1576 vstream->vap_prog_stream_cntl[i >> 1] |= type << 16; 1577 vstream->vap_prog_stream_cntl_ext[i >> 1] |= swizzle << 16; 1578 } else { 1579 vstream->vap_prog_stream_cntl[i >> 1] |= type; 1580 vstream->vap_prog_stream_cntl_ext[i >> 1] |= swizzle; 1581 } 1582 } 1583 1584 /* Set the last vector in the PSC. */ 1585 if (i) { 1586 i -= 1; 1587 } 1588 vstream->vap_prog_stream_cntl[i >> 1] |= 1589 (R300_LAST_VEC << (i & 1 ? 16 : 0)); 1590 1591 vstream->count = (i >> 1) + 1; 1592} 1593 1594#define FORMAT_REPLACE(what, withwhat) \ 1595 case PIPE_FORMAT_##what: *format = PIPE_FORMAT_##withwhat; break 1596 1597static void* r300_create_vertex_elements_state(struct pipe_context* pipe, 1598 unsigned count, 1599 const struct pipe_vertex_element* attribs) 1600{ 1601 struct r300_vertex_element_state *velems; 1602 unsigned i; 1603 enum pipe_format *format; 1604 1605 assert(count <= PIPE_MAX_ATTRIBS); 1606 velems = CALLOC_STRUCT(r300_vertex_element_state); 1607 if (velems != NULL) { 1608 velems->count = count; 1609 memcpy(velems->velem, attribs, sizeof(struct pipe_vertex_element) * count); 1610 1611 if (r300_screen(pipe->screen)->caps.has_tcl) { 1612 /* Set the best hw format in case the original format is not 1613 * supported by hw. */ 1614 for (i = 0; i < count; i++) { 1615 velems->hw_format[i] = velems->velem[i].src_format; 1616 format = &velems->hw_format[i]; 1617 1618 /* This is basically the list of unsupported formats. 1619 * For now we don't care about the alignment, that's going to 1620 * be sorted out after the PSC setup. */ 1621 switch (*format) { 1622 FORMAT_REPLACE(R64_FLOAT, R32_FLOAT); 1623 FORMAT_REPLACE(R64G64_FLOAT, R32G32_FLOAT); 1624 FORMAT_REPLACE(R64G64B64_FLOAT, R32G32B32_FLOAT); 1625 FORMAT_REPLACE(R64G64B64A64_FLOAT, R32G32B32A32_FLOAT); 1626 1627 FORMAT_REPLACE(R32_UNORM, R32_FLOAT); 1628 FORMAT_REPLACE(R32G32_UNORM, R32G32_FLOAT); 1629 FORMAT_REPLACE(R32G32B32_UNORM, R32G32B32_FLOAT); 1630 FORMAT_REPLACE(R32G32B32A32_UNORM, R32G32B32A32_FLOAT); 1631 1632 FORMAT_REPLACE(R32_USCALED, R32_FLOAT); 1633 FORMAT_REPLACE(R32G32_USCALED, R32G32_FLOAT); 1634 FORMAT_REPLACE(R32G32B32_USCALED, R32G32B32_FLOAT); 1635 FORMAT_REPLACE(R32G32B32A32_USCALED,R32G32B32A32_FLOAT); 1636 1637 FORMAT_REPLACE(R32_SNORM, R32_FLOAT); 1638 FORMAT_REPLACE(R32G32_SNORM, R32G32_FLOAT); 1639 FORMAT_REPLACE(R32G32B32_SNORM, R32G32B32_FLOAT); 1640 FORMAT_REPLACE(R32G32B32A32_SNORM, R32G32B32A32_FLOAT); 1641 1642 FORMAT_REPLACE(R32_SSCALED, R32_FLOAT); 1643 FORMAT_REPLACE(R32G32_SSCALED, R32G32_FLOAT); 1644 FORMAT_REPLACE(R32G32B32_SSCALED, R32G32B32_FLOAT); 1645 FORMAT_REPLACE(R32G32B32A32_SSCALED,R32G32B32A32_FLOAT); 1646 1647 FORMAT_REPLACE(R32_FIXED, R32_FLOAT); 1648 FORMAT_REPLACE(R32G32_FIXED, R32G32_FLOAT); 1649 FORMAT_REPLACE(R32G32B32_FIXED, R32G32B32_FLOAT); 1650 FORMAT_REPLACE(R32G32B32A32_FIXED, R32G32B32A32_FLOAT); 1651 1652 default:; 1653 } 1654 1655 velems->incompatible_layout = 1656 velems->incompatible_layout || 1657 velems->velem[i].src_format != velems->hw_format[i] || 1658 velems->velem[i].src_offset % 4 != 0; 1659 } 1660 1661 /* Now setup PSC. 1662 * The unused components will be replaced by (..., 0, 1). */ 1663 r300_vertex_psc(velems); 1664 1665 /* Align the formats to the size of DWORD. 1666 * We only care about the blocksizes of the formats since 1667 * swizzles are already set up. 1668 * Also compute the vertex size. */ 1669 for (i = 0; i < count; i++) { 1670 /* This is OK because we check for aligned strides too. */ 1671 velems->hw_format_size[i] = 1672 align(util_format_get_blocksize(velems->hw_format[i]), 4); 1673 velems->vertex_size_dwords += velems->hw_format_size[i] / 4; 1674 } 1675 } 1676 } 1677 return velems; 1678} 1679 1680static void r300_bind_vertex_elements_state(struct pipe_context *pipe, 1681 void *state) 1682{ 1683 struct r300_context *r300 = r300_context(pipe); 1684 struct r300_vertex_element_state *velems = state; 1685 1686 if (velems == NULL) { 1687 return; 1688 } 1689 1690 r300->velems = velems; 1691 1692 if (r300->draw) { 1693 draw_set_vertex_elements(r300->draw, velems->count, velems->velem); 1694 return; 1695 } 1696 1697 UPDATE_STATE(&velems->vertex_stream, r300->vertex_stream_state); 1698 r300->vertex_stream_state.size = (1 + velems->vertex_stream.count) * 2; 1699} 1700 1701static void r300_delete_vertex_elements_state(struct pipe_context *pipe, void *state) 1702{ 1703 FREE(state); 1704} 1705 1706static void* r300_create_vs_state(struct pipe_context* pipe, 1707 const struct pipe_shader_state* shader) 1708{ 1709 struct r300_context* r300 = r300_context(pipe); 1710 struct r300_vertex_shader* vs = CALLOC_STRUCT(r300_vertex_shader); 1711 1712 /* Copy state directly into shader. */ 1713 vs->state = *shader; 1714 vs->state.tokens = tgsi_dup_tokens(shader->tokens); 1715 1716 if (r300->screen->caps.has_tcl) { 1717 r300_init_vs_outputs(vs); 1718 r300_translate_vertex_shader(r300, vs); 1719 } else { 1720 r300_draw_init_vertex_shader(r300->draw, vs); 1721 } 1722 1723 return vs; 1724} 1725 1726static void r300_bind_vs_state(struct pipe_context* pipe, void* shader) 1727{ 1728 struct r300_context* r300 = r300_context(pipe); 1729 struct r300_vertex_shader* vs = (struct r300_vertex_shader*)shader; 1730 1731 if (vs == NULL) { 1732 r300->vs_state.state = NULL; 1733 return; 1734 } 1735 if (vs == r300->vs_state.state) { 1736 return; 1737 } 1738 r300->vs_state.state = vs; 1739 1740 /* The majority of the RS block bits is dependent on the vertex shader. */ 1741 r300->rs_block_state.dirty = TRUE; /* Will be updated before the emission. */ 1742 1743 if (r300->screen->caps.has_tcl) { 1744 unsigned fc_op_dwords = r300->screen->caps.is_r500 ? 3 : 2; 1745 r300->vs_state.dirty = TRUE; 1746 r300->vs_state.size = 1747 vs->code.length + 9 + 1748 (vs->immediates_count ? vs->immediates_count * 4 + 3 : 0) + 1749 (vs->code.num_fc_ops ? vs->code.num_fc_ops * fc_op_dwords + 4 : 0); 1750 1751 if (vs->externals_count) { 1752 r300->vs_constants.dirty = TRUE; 1753 r300->vs_constants.size = vs->externals_count * 4 + 3; 1754 } else { 1755 r300->vs_constants.size = 0; 1756 } 1757 1758 ((struct r300_constant_buffer*)r300->vs_constants.state)->remap_table = 1759 vs->code.constants_remap_table; 1760 1761 r300->pvs_flush.dirty = TRUE; 1762 } else { 1763 draw_bind_vertex_shader(r300->draw, 1764 (struct draw_vertex_shader*)vs->draw_vs); 1765 } 1766} 1767 1768static void r300_delete_vs_state(struct pipe_context* pipe, void* shader) 1769{ 1770 struct r300_context* r300 = r300_context(pipe); 1771 struct r300_vertex_shader* vs = (struct r300_vertex_shader*)shader; 1772 1773 if (r300->screen->caps.has_tcl) { 1774 rc_constants_destroy(&vs->code.constants); 1775 if (vs->code.constants_remap_table) 1776 FREE(vs->code.constants_remap_table); 1777 } else { 1778 draw_delete_vertex_shader(r300->draw, 1779 (struct draw_vertex_shader*)vs->draw_vs); 1780 } 1781 1782 FREE((void*)vs->state.tokens); 1783 FREE(shader); 1784} 1785 1786static void r300_set_constant_buffer(struct pipe_context *pipe, 1787 uint shader, uint index, 1788 struct pipe_resource *buf) 1789{ 1790 struct r300_context* r300 = r300_context(pipe); 1791 struct r300_constant_buffer *cbuf; 1792 uint32_t *mapped; 1793 1794 switch (shader) { 1795 case PIPE_SHADER_VERTEX: 1796 cbuf = (struct r300_constant_buffer*)r300->vs_constants.state; 1797 break; 1798 case PIPE_SHADER_FRAGMENT: 1799 cbuf = (struct r300_constant_buffer*)r300->fs_constants.state; 1800 break; 1801 default: 1802 assert(0); 1803 return; 1804 } 1805 1806 if (buf == NULL || buf->width0 == 0 || 1807 (mapped = r300_buffer(buf)->constant_buffer) == NULL) { 1808 return; 1809 } 1810 1811 if (shader == PIPE_SHADER_FRAGMENT || 1812 (shader == PIPE_SHADER_VERTEX && r300->screen->caps.has_tcl)) { 1813 assert((buf->width0 % (4 * sizeof(float))) == 0); 1814 cbuf->ptr = mapped + index*4; 1815 } 1816 1817 if (shader == PIPE_SHADER_VERTEX) { 1818 if (r300->screen->caps.has_tcl) { 1819 if (r300->vs_constants.size) { 1820 r300->vs_constants.dirty = TRUE; 1821 } 1822 r300->pvs_flush.dirty = TRUE; 1823 } else if (r300->draw) { 1824 draw_set_mapped_constant_buffer(r300->draw, PIPE_SHADER_VERTEX, 1825 0, mapped, buf->width0); 1826 } 1827 } else if (shader == PIPE_SHADER_FRAGMENT) { 1828 r300->fs_constants.dirty = TRUE; 1829 } 1830} 1831 1832void r300_init_state_functions(struct r300_context* r300) 1833{ 1834 r300->context.create_blend_state = r300_create_blend_state; 1835 r300->context.bind_blend_state = r300_bind_blend_state; 1836 r300->context.delete_blend_state = r300_delete_blend_state; 1837 1838 r300->context.set_blend_color = r300_set_blend_color; 1839 1840 r300->context.set_clip_state = r300_set_clip_state; 1841 r300->context.set_sample_mask = r300_set_sample_mask; 1842 1843 r300->context.set_constant_buffer = r300_set_constant_buffer; 1844 1845 r300->context.create_depth_stencil_alpha_state = r300_create_dsa_state; 1846 r300->context.bind_depth_stencil_alpha_state = r300_bind_dsa_state; 1847 r300->context.delete_depth_stencil_alpha_state = r300_delete_dsa_state; 1848 1849 r300->context.set_stencil_ref = r300_set_stencil_ref; 1850 1851 r300->context.set_framebuffer_state = r300_set_framebuffer_state; 1852 1853 r300->context.create_fs_state = r300_create_fs_state; 1854 r300->context.bind_fs_state = r300_bind_fs_state; 1855 r300->context.delete_fs_state = r300_delete_fs_state; 1856 1857 r300->context.set_polygon_stipple = r300_set_polygon_stipple; 1858 1859 r300->context.create_rasterizer_state = r300_create_rs_state; 1860 r300->context.bind_rasterizer_state = r300_bind_rs_state; 1861 r300->context.delete_rasterizer_state = r300_delete_rs_state; 1862 1863 r300->context.create_sampler_state = r300_create_sampler_state; 1864 r300->context.bind_fragment_sampler_states = r300_bind_sampler_states; 1865 r300->context.bind_vertex_sampler_states = r300_lacks_vertex_textures; 1866 r300->context.delete_sampler_state = r300_delete_sampler_state; 1867 1868 r300->context.set_fragment_sampler_views = r300_set_fragment_sampler_views; 1869 r300->context.create_sampler_view = r300_create_sampler_view; 1870 r300->context.sampler_view_destroy = r300_sampler_view_destroy; 1871 1872 r300->context.set_scissor_state = r300_set_scissor_state; 1873 1874 r300->context.set_viewport_state = r300_set_viewport_state; 1875 1876 r300->context.set_vertex_buffers = r300_set_vertex_buffers; 1877 r300->context.set_index_buffer = r300_set_index_buffer; 1878 1879 r300->context.create_vertex_elements_state = r300_create_vertex_elements_state; 1880 r300->context.bind_vertex_elements_state = r300_bind_vertex_elements_state; 1881 r300->context.delete_vertex_elements_state = r300_delete_vertex_elements_state; 1882 1883 r300->context.create_vs_state = r300_create_vs_state; 1884 r300->context.bind_vs_state = r300_bind_vs_state; 1885 r300->context.delete_vs_state = r300_delete_vs_state; 1886} 1887