/* * Copyright (C) 2013 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.hardware.camera2; import android.hardware.camera2.impl.CameraMetadataNative; import android.hardware.camera2.impl.PublicKey; import android.hardware.camera2.impl.SyntheticKey; import android.util.Log; import java.lang.reflect.Field; import java.lang.reflect.Modifier; import java.util.ArrayList; import java.util.Arrays; import java.util.Collections; import java.util.List; /** * The base class for camera controls and information. * *

* This class defines the basic key/value map used for querying for camera * characteristics or capture results, and for setting camera request * parameters. *

* *

* All instances of CameraMetadata are immutable. The list of keys with {@link #getKeys()} * never changes, nor do the values returned by any key with {@code #get} throughout * the lifetime of the object. *

* * @see CameraDevice * @see CameraManager * @see CameraCharacteristics **/ public abstract class CameraMetadata { private static final String TAG = "CameraMetadataAb"; private static final boolean VERBOSE = Log.isLoggable(TAG, Log.VERBOSE); /** * Set a camera metadata field to a value. The field definitions can be * found in {@link CameraCharacteristics}, {@link CaptureResult}, and * {@link CaptureRequest}. * * @param key The metadata field to write. * @param value The value to set the field to, which must be of a matching * type to the key. * * @hide */ protected CameraMetadata() { } /** * Get a camera metadata field value. * *

The field definitions can be * found in {@link CameraCharacteristics}, {@link CaptureResult}, and * {@link CaptureRequest}.

* *

Querying the value for the same key more than once will return a value * which is equal to the previous queried value.

* * @throws IllegalArgumentException if the key was not valid * * @param key The metadata field to read. * @return The value of that key, or {@code null} if the field is not set. * * @hide */ protected abstract T getProtected(TKey key); /** * @hide */ protected abstract Class getKeyClass(); /** * Returns a list of the keys contained in this map. * *

The list returned is not modifiable, so any attempts to modify it will throw * a {@code UnsupportedOperationException}.

* *

All values retrieved by a key from this list with {@code #get} are guaranteed to be * non-{@code null}. Each key is only listed once in the list. The order of the keys * is undefined.

* * @return List of the keys contained in this map. */ @SuppressWarnings("unchecked") public List getKeys() { Class> thisClass = (Class>) getClass(); return Collections.unmodifiableList( getKeysStatic(thisClass, getKeyClass(), this, /*filterTags*/null)); } /** * Return a list of all the Key that are declared as a field inside of the class * {@code type}. * *

* Optionally, if {@code instance} is not null, then filter out any keys with null values. *

* *

* Optionally, if {@code filterTags} is not {@code null}, then filter out any keys * whose native {@code tag} is not in {@code filterTags}. The {@code filterTags} array will be * sorted as a side effect. *

*/ /*package*/ @SuppressWarnings("unchecked") static ArrayList getKeysStatic( Class type, Class keyClass, CameraMetadata instance, int[] filterTags) { if (VERBOSE) Log.v(TAG, "getKeysStatic for " + type); // TotalCaptureResult does not have any of the keys on it, use CaptureResult instead if (type.equals(TotalCaptureResult.class)) { type = CaptureResult.class; } if (filterTags != null) { Arrays.sort(filterTags); } ArrayList keyList = new ArrayList(); Field[] fields = type.getDeclaredFields(); for (Field field : fields) { // Filter for Keys that are public if (field.getType().isAssignableFrom(keyClass) && (field.getModifiers() & Modifier.PUBLIC) != 0) { TKey key; try { key = (TKey) field.get(instance); } catch (IllegalAccessException e) { throw new AssertionError("Can't get IllegalAccessException", e); } catch (IllegalArgumentException e) { throw new AssertionError("Can't get IllegalArgumentException", e); } if (instance == null || instance.getProtected(key) != null) { if (shouldKeyBeAdded(key, field, filterTags)) { keyList.add(key); if (VERBOSE) { Log.v(TAG, "getKeysStatic - key was added - " + key); } } else if (VERBOSE) { Log.v(TAG, "getKeysStatic - key was filtered - " + key); } } } } return keyList; } @SuppressWarnings("rawtypes") private static boolean shouldKeyBeAdded(TKey key, Field field, int[] filterTags) { if (key == null) { throw new NullPointerException("key must not be null"); } CameraMetadataNative.Key nativeKey; /* * Get the native key from the public api key */ if (key instanceof CameraCharacteristics.Key) { nativeKey = ((CameraCharacteristics.Key)key).getNativeKey(); } else if (key instanceof CaptureResult.Key) { nativeKey = ((CaptureResult.Key)key).getNativeKey(); } else if (key instanceof CaptureRequest.Key) { nativeKey = ((CaptureRequest.Key)key).getNativeKey(); } else { // Reject fields that aren't a key throw new IllegalArgumentException("key type must be that of a metadata key"); } if (field.getAnnotation(PublicKey.class) == null) { // Never expose @hide keys up to the API user return false; } // No filtering necessary if (filterTags == null) { return true; } if (field.getAnnotation(SyntheticKey.class) != null) { // This key is synthetic, so calling #getTag will throw IAE // TODO: don't just assume all public+synthetic keys are always available return true; } /* * Regular key: look up it's native tag and see if it's in filterTags */ int keyTag = nativeKey.getTag(); // non-negative result is returned iff the value is in the array return Arrays.binarySearch(filterTags, keyTag) >= 0; } /*@O~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ * The enum values below this point are generated from metadata * definitions in /system/media/camera/docs. Do not modify by hand or * modify the comment blocks at the start or end. *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~*/ // // Enumeration values for CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION // /** *

The lens focus distance is not accurate, and the units used for * {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} do not correspond to any physical units.

*

Setting the lens to the same focus distance on separate occasions may * result in a different real focus distance, depending on factors such * as the orientation of the device, the age of the focusing mechanism, * and the device temperature. The focus distance value will still be * in the range of [0, {@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance}], where 0 * represents the farthest focus.

* * @see CaptureRequest#LENS_FOCUS_DISTANCE * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE * @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION */ public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED = 0; /** *

The lens focus distance is measured in diopters.

*

However, setting the lens to the same focus distance * on separate occasions may result in a different real * focus distance, depending on factors such as the * orientation of the device, the age of the focusing * mechanism, and the device temperature.

* @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION */ public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE = 1; /** *

The lens focus distance is measured in diopters, and * is calibrated.

*

The lens mechanism is calibrated so that setting the * same focus distance is repeatable on multiple * occasions with good accuracy, and the focus distance * corresponds to the real physical distance to the plane * of best focus.

* @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION */ public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED = 2; // // Enumeration values for CameraCharacteristics#LENS_FACING // /** *

The camera device faces the same direction as the device's screen.

* @see CameraCharacteristics#LENS_FACING */ public static final int LENS_FACING_FRONT = 0; /** *

The camera device faces the opposite direction as the device's screen.

* @see CameraCharacteristics#LENS_FACING */ public static final int LENS_FACING_BACK = 1; /** *

The camera device is an external camera, and has no fixed facing relative to the * device's screen.

* @see CameraCharacteristics#LENS_FACING */ public static final int LENS_FACING_EXTERNAL = 2; // // Enumeration values for CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES // /** *

The minimal set of capabilities that every camera * device (regardless of {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel}) * supports.

*

This capability is listed by all normal devices, and * indicates that the camera device has a feature set * that's comparable to the baseline requirements for the * older android.hardware.Camera API.

*

Devices with the DEPTH_OUTPUT capability might not list this * capability, indicating that they support only depth measurement, * not standard color output.

* * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE = 0; /** *

The camera device can be manually controlled (3A algorithms such * as auto-exposure, and auto-focus can be bypassed). * The camera device supports basic manual control of the sensor image * acquisition related stages. This means the following controls are * guaranteed to be supported:

*
    *
  • Manual frame duration control
      *
    • {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration}
      • *
    • {@link CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION android.sensor.info.maxFrameDuration}
      • *
    *
    • *
  • Manual exposure control
      *
    • {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}
      • *
    • {@link CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE android.sensor.info.exposureTimeRange}
      • *
    *
    • *
  • Manual sensitivity control
      *
    • {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}
      • *
    • {@link CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE android.sensor.info.sensitivityRange}
      • *
    *
    • *
  • Manual lens control (if the lens is adjustable)
      *
    • android.lens.*
      • *
    *
    • *
  • Manual flash control (if a flash unit is present)
      *
    • android.flash.*
      • *
    *
    • *
  • Manual black level locking
      *
    • {@link CaptureRequest#BLACK_LEVEL_LOCK android.blackLevel.lock}
      • *
    *
    • *
  • Auto exposure lock
      *
    • {@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock}
      • *
    *
    • *
*

If any of the above 3A algorithms are enabled, then the camera * device will accurately report the values applied by 3A in the * result.

*

A given camera device may also support additional manual sensor controls, * but this capability only covers the above list of controls.

*

If this is supported, {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap} will * additionally return a min frame duration that is greater than * zero for each supported size-format combination.

* * @see CaptureRequest#BLACK_LEVEL_LOCK * @see CaptureRequest#CONTROL_AE_LOCK * @see CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP * @see CaptureRequest#SENSOR_EXPOSURE_TIME * @see CaptureRequest#SENSOR_FRAME_DURATION * @see CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE * @see CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION * @see CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE * @see CaptureRequest#SENSOR_SENSITIVITY * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR = 1; /** *

The camera device post-processing stages can be manually controlled. * The camera device supports basic manual control of the image post-processing * stages. This means the following controls are guaranteed to be supported:

*
    *
  • *

    Manual tonemap control

    *
      *
    • {@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}
      • *
    • {@link CaptureRequest#TONEMAP_MODE android.tonemap.mode}
      • *
    • {@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}
      • *
    • android.tonemap.gamma
      • *
    • android.tonemap.presetCurve
      • *
    *
    • *
  • *

    Manual white balance control

    *
      *
    • {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}
      • *
    • {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains}
      • *
    *
    • *
  • Manual lens shading map control
      *
    • {@link CaptureRequest#SHADING_MODE android.shading.mode}
      • *
    • {@link CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE android.statistics.lensShadingMapMode}
      • *
    • android.statistics.lensShadingMap
      • *
    • android.lens.info.shadingMapSize
      • *
    *
    • *
  • Manual aberration correction control (if aberration correction is supported)
      *
    • {@link CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE android.colorCorrection.aberrationMode}
      • *
    • {@link CameraCharacteristics#COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES android.colorCorrection.availableAberrationModes}
      • *
    *
    • *
  • Auto white balance lock
      *
    • {@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}
      • *
    *
    • *
*

If auto white balance is enabled, then the camera device * will accurately report the values applied by AWB in the result.

*

A given camera device may also support additional post-processing * controls, but this capability only covers the above list of controls.

* * @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE * @see CameraCharacteristics#COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_LOCK * @see CaptureRequest#SHADING_MODE * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE * @see CaptureRequest#TONEMAP_CURVE * @see CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS * @see CaptureRequest#TONEMAP_MODE * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING = 2; /** *

The camera device supports outputting RAW buffers and * metadata for interpreting them.

*

Devices supporting the RAW capability allow both for * saving DNG files, and for direct application processing of * raw sensor images.

*
    *
  • RAW_SENSOR is supported as an output format.
    • *
  • The maximum available resolution for RAW_SENSOR streams * will match either the value in * {@link CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE android.sensor.info.pixelArraySize} or * {@link CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE android.sensor.info.activeArraySize}.
    • *
  • All DNG-related optional metadata entries are provided * by the camera device.
    • *
* * @see CameraCharacteristics#SENSOR_INFO_ACTIVE_ARRAY_SIZE * @see CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_RAW = 3; /** *

The camera device supports the Zero Shutter Lag reprocessing use case.

*
    *
  • One input stream is supported, that is, {@link CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS android.request.maxNumInputStreams} == 1.
    • *
  • {@link android.graphics.ImageFormat#PRIVATE } is supported as an output/input format, * that is, {@link android.graphics.ImageFormat#PRIVATE } is included in the lists of * formats returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats } and {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats }.
    • *
  • {@link android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput } * returns non empty int[] for each supported input format returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats }.
    • *
  • Each size returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputSizes getInputSizes(ImageFormat.PRIVATE)} is also included in {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes getOutputSizes(ImageFormat.PRIVATE)}
    • *
  • Using {@link android.graphics.ImageFormat#PRIVATE } does not cause a frame rate drop * relative to the sensor's maximum capture rate (at that resolution).
    • *
  • {@link android.graphics.ImageFormat#PRIVATE } will be reprocessable into both * {@link android.graphics.ImageFormat#YUV_420_888 } and * {@link android.graphics.ImageFormat#JPEG } formats.
    • *
  • The maximum available resolution for PRIVATE streams * (both input/output) will match the maximum available * resolution of JPEG streams.
    • *
  • Static metadata {@link CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL android.reprocess.maxCaptureStall}.
    • *
  • Only below controls are effective for reprocessing requests and * will be present in capture results, other controls in reprocess * requests will be ignored by the camera device.
      *
    • android.jpeg.*
      • *
    • {@link CaptureRequest#NOISE_REDUCTION_MODE android.noiseReduction.mode}
      • *
    • {@link CaptureRequest#EDGE_MODE android.edge.mode}
      • *
    *
    • *
* * @see CaptureRequest#EDGE_MODE * @see CaptureRequest#NOISE_REDUCTION_MODE * @see CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL * @see CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING = 4; /** *

The camera device supports accurately reporting the sensor settings for many of * the sensor controls while the built-in 3A algorithm is running. This allows * reporting of sensor settings even when these settings cannot be manually changed.

*

The values reported for the following controls are guaranteed to be available * in the CaptureResult, including when 3A is enabled:

*
    *
  • Exposure control
      *
    • {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}
      • *
    *
    • *
  • Sensitivity control
      *
    • {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}
      • *
    *
    • *
  • Lens controls (if the lens is adjustable)
      *
    • {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}
      • *
    • {@link CaptureRequest#LENS_APERTURE android.lens.aperture}
      • *
    *
    • *
*

This capability is a subset of the MANUAL_SENSOR control capability, and will * always be included if the MANUAL_SENSOR capability is available.

* * @see CaptureRequest#LENS_APERTURE * @see CaptureRequest#LENS_FOCUS_DISTANCE * @see CaptureRequest#SENSOR_EXPOSURE_TIME * @see CaptureRequest#SENSOR_SENSITIVITY * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS = 5; /** *

The camera device supports capturing maximum-resolution * images at >= 20 frames per second, in at least the * uncompressed YUV format, when post-processing settings * are set to FAST.

*

More specifically, this means that a size matching the * camera device's active array size is listed as a * supported size for the YUV_420_888 format in * {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap}, the minimum frame * duration for that format and size is <= 1/20 s, and * the {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES android.control.aeAvailableTargetFpsRanges} entry * lists at least one FPS range where the minimum FPS is

*
*

= 1 / minimumFrameDuration for the maximum-size * YUV_420_888 format.

*
*

In addition, the {@link CameraCharacteristics#SYNC_MAX_LATENCY android.sync.maxLatency} field is * guaranted to have a value between 0 and 4, inclusive. * {@link CameraCharacteristics#CONTROL_AE_LOCK_AVAILABLE android.control.aeLockAvailable} and * {@link CameraCharacteristics#CONTROL_AWB_LOCK_AVAILABLE android.control.awbLockAvailable} are also guaranteed * to be true so burst capture with these two locks ON * yields consistent image output.

*

On a camera device that reports the HIGH_RESOLUTION hardware * level, meaning the device supports very large capture sizes, * BURST_CAPTURE means that at least 8-megapixel images can be * captured at >= 20 fps, and maximum-resolution images can be * captured at >= 10 fps.

* * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES * @see CameraCharacteristics#CONTROL_AE_LOCK_AVAILABLE * @see CameraCharacteristics#CONTROL_AWB_LOCK_AVAILABLE * @see CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP * @see CameraCharacteristics#SYNC_MAX_LATENCY * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE = 6; /** *

The camera device supports the YUV_420_888 reprocessing use case, similar as * PRIVATE_REPROCESSING, This capability requires the camera device to support the * following:

*
    *
  • One input stream is supported, that is, {@link CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS android.request.maxNumInputStreams} == 1.
    • *
  • {@link android.graphics.ImageFormat#YUV_420_888 } is supported as an output/input format, that is, * YUV_420_888 is included in the lists of formats returned by * {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats } and * {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats }.
    • *
  • {@link android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput } * returns non-empty int[] for each supported input format returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats }.
    • *
  • Each size returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputSizes getInputSizes(YUV_420_888)} is also included in {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes getOutputSizes(YUV_420_888)}
    • *
  • Using {@link android.graphics.ImageFormat#YUV_420_888 } does not cause a frame rate drop * relative to the sensor's maximum capture rate (at that resolution).
    • *
  • {@link android.graphics.ImageFormat#YUV_420_888 } will be reprocessable into both * {@link android.graphics.ImageFormat#YUV_420_888 } and {@link android.graphics.ImageFormat#JPEG } formats.
    • *
  • The maximum available resolution for {@link android.graphics.ImageFormat#YUV_420_888 } streams (both input/output) will match the * maximum available resolution of {@link android.graphics.ImageFormat#JPEG } streams.
    • *
  • Static metadata {@link CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL android.reprocess.maxCaptureStall}.
    • *
  • Only the below controls are effective for reprocessing requests and will be present * in capture results. The reprocess requests are from the original capture results that * are associated with the intermediate {@link android.graphics.ImageFormat#YUV_420_888 } * output buffers. All other controls in the reprocess requests will be ignored by the * camera device.
      *
    • android.jpeg.*
      • *
    • {@link CaptureRequest#NOISE_REDUCTION_MODE android.noiseReduction.mode}
      • *
    • {@link CaptureRequest#EDGE_MODE android.edge.mode}
      • *
    • {@link CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR android.reprocess.effectiveExposureFactor}
      • *
    *
    • *
* * @see CaptureRequest#EDGE_MODE * @see CaptureRequest#NOISE_REDUCTION_MODE * @see CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR * @see CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL * @see CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING = 7; /** *

The camera device can produce depth measurements from its field of view.

*

This capability requires the camera device to support the following:

*
    *
  • {@link android.graphics.ImageFormat#DEPTH16 } is supported as an output format.
    • *
  • {@link android.graphics.ImageFormat#DEPTH_POINT_CLOUD } is optionally supported as an * output format.
    • *
  • This camera device, and all camera devices with the same {@link CameraCharacteristics#LENS_FACING android.lens.facing}, * will list the following calibration entries in both * {@link android.hardware.camera2.CameraCharacteristics } and * {@link android.hardware.camera2.CaptureResult }:
      *
    • {@link CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation}
      • *
    • {@link CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation}
      • *
    • android.lens.intrinsicCalibration
      • *
    • android.lens.radialDistortion
      • *
    *
    • *
  • The {@link CameraCharacteristics#DEPTH_DEPTH_IS_EXCLUSIVE android.depth.depthIsExclusive} entry is listed by this device.
    • *
  • A LIMITED camera with only the DEPTH_OUTPUT capability does not have to support * normal YUV_420_888, JPEG, and PRIV-format outputs. It only has to support the DEPTH16 * format.
    • *
*

Generally, depth output operates at a slower frame rate than standard color capture, * so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that * should be accounted for (see * {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration }). * On a device that supports both depth and color-based output, to enable smooth preview, * using a repeating burst is recommended, where a depth-output target is only included * once every N frames, where N is the ratio between preview output rate and depth output * rate, including depth stall time.

* * @see CameraCharacteristics#DEPTH_DEPTH_IS_EXCLUSIVE * @see CameraCharacteristics#LENS_FACING * @see CameraCharacteristics#LENS_POSE_ROTATION * @see CameraCharacteristics#LENS_POSE_TRANSLATION * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES */ public static final int REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT = 8; // // Enumeration values for CameraCharacteristics#SCALER_CROPPING_TYPE // /** *

The camera device only supports centered crop regions.

* @see CameraCharacteristics#SCALER_CROPPING_TYPE */ public static final int SCALER_CROPPING_TYPE_CENTER_ONLY = 0; /** *

The camera device supports arbitrarily chosen crop regions.

* @see CameraCharacteristics#SCALER_CROPPING_TYPE */ public static final int SCALER_CROPPING_TYPE_FREEFORM = 1; // // Enumeration values for CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT // /** * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT */ public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB = 0; /** * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT */ public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG = 1; /** * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT */ public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG = 2; /** * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT */ public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR = 3; /** *

Sensor is not Bayer; output has 3 16-bit * values for each pixel, instead of just 1 16-bit value * per pixel.

* @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT */ public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB = 4; // // Enumeration values for CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE // /** *

Timestamps from {@link CaptureResult#SENSOR_TIMESTAMP android.sensor.timestamp} are in nanoseconds and monotonic, * but can not be compared to timestamps from other subsystems * (e.g. accelerometer, gyro etc.), or other instances of the same or different * camera devices in the same system. Timestamps between streams and results for * a single camera instance are comparable, and the timestamps for all buffers * and the result metadata generated by a single capture are identical.

* * @see CaptureResult#SENSOR_TIMESTAMP * @see CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE */ public static final int SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN = 0; /** *

Timestamps from {@link CaptureResult#SENSOR_TIMESTAMP android.sensor.timestamp} are in the same timebase as * {@link android.os.SystemClock#elapsedRealtimeNanos }, * and they can be compared to other timestamps using that base.

* * @see CaptureResult#SENSOR_TIMESTAMP * @see CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE */ public static final int SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME = 1; // // Enumeration values for CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 // /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT = 1; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT = 2; /** *

Incandescent light

* @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN = 3; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_FLASH = 4; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER = 9; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER = 10; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_SHADE = 11; /** *

D 5700 - 7100K

* @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT = 12; /** *

N 4600 - 5400K

* @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT = 13; /** *

W 3900 - 4500K

* @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT = 14; /** *

WW 3200 - 3700K

* @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT = 15; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A = 17; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B = 18; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C = 19; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_D55 = 20; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_D65 = 21; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_D75 = 22; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_D50 = 23; /** * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 */ public static final int SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN = 24; // // Enumeration values for CameraCharacteristics#LED_AVAILABLE_LEDS // /** *

android.led.transmit control is used.

* @see CameraCharacteristics#LED_AVAILABLE_LEDS * @hide */ public static final int LED_AVAILABLE_LEDS_TRANSMIT = 0; // // Enumeration values for CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL // /** *

This camera device has only limited capabilities.

* @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL */ public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED = 0; /** *

This camera device is capable of supporting advanced imaging applications.

* @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL */ public static final int INFO_SUPPORTED_HARDWARE_LEVEL_FULL = 1; /** *

This camera device is running in backward compatibility mode.

* @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL */ public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY = 2; /** *

This camera device is capable of supporting advanced imaging applications at full rate, * and additional high-resolution outputs at lower rates.

* @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL */ public static final int INFO_SUPPORTED_HARDWARE_LEVEL_HIGH_RESOLUTION = 3; // // Enumeration values for CameraCharacteristics#SYNC_MAX_LATENCY // /** *

Every frame has the requests immediately applied.

*

Furthermore for all results, * android.sync.frameNumber == {@link android.hardware.camera2.CaptureResult#getFrameNumber }

*

Changing controls over multiple requests one after another will * produce results that have those controls applied atomically * each frame.

*

All FULL capability devices will have this as their maxLatency.

* @see CameraCharacteristics#SYNC_MAX_LATENCY */ public static final int SYNC_MAX_LATENCY_PER_FRAME_CONTROL = 0; /** *

Each new frame has some subset (potentially the entire set) * of the past requests applied to the camera settings.

*

By submitting a series of identical requests, the camera device * will eventually have the camera settings applied, but it is * unknown when that exact point will be.

*

All LEGACY capability devices will have this as their maxLatency.

* @see CameraCharacteristics#SYNC_MAX_LATENCY */ public static final int SYNC_MAX_LATENCY_UNKNOWN = -1; // // Enumeration values for CaptureRequest#COLOR_CORRECTION_MODE // /** *

Use the {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} matrix * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} to do color conversion.

*

All advanced white balance adjustments (not specified * by our white balance pipeline) must be disabled.

*

If AWB is enabled with {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != OFF, then * TRANSFORM_MATRIX is ignored. The camera device will override * this value to either FAST or HIGH_QUALITY.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE * @see CaptureRequest#COLOR_CORRECTION_MODE */ public static final int COLOR_CORRECTION_MODE_TRANSFORM_MATRIX = 0; /** *

Color correction processing must not slow down * capture rate relative to sensor raw output.

*

Advanced white balance adjustments above and beyond * the specified white balance pipeline may be applied.

*

If AWB is enabled with {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != OFF, then * the camera device uses the last frame's AWB values * (or defaults if AWB has never been run).

* * @see CaptureRequest#CONTROL_AWB_MODE * @see CaptureRequest#COLOR_CORRECTION_MODE */ public static final int COLOR_CORRECTION_MODE_FAST = 1; /** *

Color correction processing operates at improved * quality but the capture rate might be reduced (relative to sensor * raw output rate)

*

Advanced white balance adjustments above and beyond * the specified white balance pipeline may be applied.

*

If AWB is enabled with {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != OFF, then * the camera device uses the last frame's AWB values * (or defaults if AWB has never been run).

* * @see CaptureRequest#CONTROL_AWB_MODE * @see CaptureRequest#COLOR_CORRECTION_MODE */ public static final int COLOR_CORRECTION_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE // /** *

No aberration correction is applied.

* @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE */ public static final int COLOR_CORRECTION_ABERRATION_MODE_OFF = 0; /** *

Aberration correction will not slow down capture rate * relative to sensor raw output.

* @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE */ public static final int COLOR_CORRECTION_ABERRATION_MODE_FAST = 1; /** *

Aberration correction operates at improved quality but the capture rate might be * reduced (relative to sensor raw output rate)

* @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE */ public static final int COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#CONTROL_AE_ANTIBANDING_MODE // /** *

The camera device will not adjust exposure duration to * avoid banding problems.

* @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_OFF = 0; /** *

The camera device will adjust exposure duration to * avoid banding problems with 50Hz illumination sources.

* @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_50HZ = 1; /** *

The camera device will adjust exposure duration to * avoid banding problems with 60Hz illumination * sources.

* @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_60HZ = 2; /** *

The camera device will automatically adapt its * antibanding routine to the current illumination * condition. This is the default mode if AUTO is * available on given camera device.

* @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE */ public static final int CONTROL_AE_ANTIBANDING_MODE_AUTO = 3; // // Enumeration values for CaptureRequest#CONTROL_AE_MODE // /** *

The camera device's autoexposure routine is disabled.

*

The application-selected {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity} and * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration} are used by the camera * device, along with android.flash.* fields, if there's * a flash unit for this camera device.

*

Note that auto-white balance (AWB) and auto-focus (AF) * behavior is device dependent when AE is in OFF mode. * To have consistent behavior across different devices, * it is recommended to either set AWB and AF to OFF mode * or lock AWB and AF before setting AE to OFF. * See {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}, * {@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}, and {@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger} * for more details.

*

LEGACY devices do not support the OFF mode and will * override attempts to use this value to ON.

* * @see CaptureRequest#CONTROL_AF_MODE * @see CaptureRequest#CONTROL_AF_TRIGGER * @see CaptureRequest#CONTROL_AWB_LOCK * @see CaptureRequest#CONTROL_AWB_MODE * @see CaptureRequest#SENSOR_EXPOSURE_TIME * @see CaptureRequest#SENSOR_FRAME_DURATION * @see CaptureRequest#SENSOR_SENSITIVITY * @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_OFF = 0; /** *

The camera device's autoexposure routine is active, * with no flash control.

*

The application's values for * {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, and * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration} are ignored. The * application has control over the various * android.flash.* fields.

* * @see CaptureRequest#SENSOR_EXPOSURE_TIME * @see CaptureRequest#SENSOR_FRAME_DURATION * @see CaptureRequest#SENSOR_SENSITIVITY * @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON = 1; /** *

Like ON, except that the camera device also controls * the camera's flash unit, firing it in low-light * conditions.

*

The flash may be fired during a precapture sequence * (triggered by {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}) and * may be fired for captures for which the * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} field is set to * STILL_CAPTURE

* * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER * @see CaptureRequest#CONTROL_CAPTURE_INTENT * @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON_AUTO_FLASH = 2; /** *

Like ON, except that the camera device also controls * the camera's flash unit, always firing it for still * captures.

*

The flash may be fired during a precapture sequence * (triggered by {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}) and * will always be fired for captures for which the * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} field is set to * STILL_CAPTURE

* * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER * @see CaptureRequest#CONTROL_CAPTURE_INTENT * @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON_ALWAYS_FLASH = 3; /** *

Like ON_AUTO_FLASH, but with automatic red eye * reduction.

*

If deemed necessary by the camera device, a red eye * reduction flash will fire during the precapture * sequence.

* @see CaptureRequest#CONTROL_AE_MODE */ public static final int CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE = 4; // // Enumeration values for CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER // /** *

The trigger is idle.

* @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER */ public static final int CONTROL_AE_PRECAPTURE_TRIGGER_IDLE = 0; /** *

The precapture metering sequence will be started * by the camera device.

*

The exact effect of the precapture trigger depends on * the current AE mode and state.

* @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER */ public static final int CONTROL_AE_PRECAPTURE_TRIGGER_START = 1; /** *

The camera device will cancel any currently active or completed * precapture metering sequence, the auto-exposure routine will return to its * initial state.

* @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER */ public static final int CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL = 2; // // Enumeration values for CaptureRequest#CONTROL_AF_MODE // /** *

The auto-focus routine does not control the lens; * {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} is controlled by the * application.

* * @see CaptureRequest#LENS_FOCUS_DISTANCE * @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_OFF = 0; /** *

Basic automatic focus mode.

*

In this mode, the lens does not move unless * the autofocus trigger action is called. When that trigger * is activated, AF will transition to ACTIVE_SCAN, then to * the outcome of the scan (FOCUSED or NOT_FOCUSED).

*

Always supported if lens is not fixed focus.

*

Use {@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance} to determine if lens * is fixed-focus.

*

Triggering AF_CANCEL resets the lens position to default, * and sets the AF state to INACTIVE.

* * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE * @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_AUTO = 1; /** *

Close-up focusing mode.

*

In this mode, the lens does not move unless the * autofocus trigger action is called. When that trigger is * activated, AF will transition to ACTIVE_SCAN, then to * the outcome of the scan (FOCUSED or NOT_FOCUSED). This * mode is optimized for focusing on objects very close to * the camera.

*

When that trigger is activated, AF will transition to * ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or * NOT_FOCUSED). Triggering cancel AF resets the lens * position to default, and sets the AF state to * INACTIVE.

* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_MACRO = 2; /** *

In this mode, the AF algorithm modifies the lens * position continually to attempt to provide a * constantly-in-focus image stream.

*

The focusing behavior should be suitable for good quality * video recording; typically this means slower focus * movement and no overshoots. When the AF trigger is not * involved, the AF algorithm should start in INACTIVE state, * and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED * states as appropriate. When the AF trigger is activated, * the algorithm should immediately transition into * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the * lens position until a cancel AF trigger is received.

*

Once cancel is received, the algorithm should transition * back to INACTIVE and resume passive scan. Note that this * behavior is not identical to CONTINUOUS_PICTURE, since an * ongoing PASSIVE_SCAN must immediately be * canceled.

* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_CONTINUOUS_VIDEO = 3; /** *

In this mode, the AF algorithm modifies the lens * position continually to attempt to provide a * constantly-in-focus image stream.

*

The focusing behavior should be suitable for still image * capture; typically this means focusing as fast as * possible. When the AF trigger is not involved, the AF * algorithm should start in INACTIVE state, and then * transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as * appropriate as it attempts to maintain focus. When the AF * trigger is activated, the algorithm should finish its * PASSIVE_SCAN if active, and then transition into * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the * lens position until a cancel AF trigger is received.

*

When the AF cancel trigger is activated, the algorithm * should transition back to INACTIVE and then act as if it * has just been started.

* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_CONTINUOUS_PICTURE = 4; /** *

Extended depth of field (digital focus) mode.

*

The camera device will produce images with an extended * depth of field automatically; no special focusing * operations need to be done before taking a picture.

*

AF triggers are ignored, and the AF state will always be * INACTIVE.

* @see CaptureRequest#CONTROL_AF_MODE */ public static final int CONTROL_AF_MODE_EDOF = 5; // // Enumeration values for CaptureRequest#CONTROL_AF_TRIGGER // /** *

The trigger is idle.

* @see CaptureRequest#CONTROL_AF_TRIGGER */ public static final int CONTROL_AF_TRIGGER_IDLE = 0; /** *

Autofocus will trigger now.

* @see CaptureRequest#CONTROL_AF_TRIGGER */ public static final int CONTROL_AF_TRIGGER_START = 1; /** *

Autofocus will return to its initial * state, and cancel any currently active trigger.

* @see CaptureRequest#CONTROL_AF_TRIGGER */ public static final int CONTROL_AF_TRIGGER_CANCEL = 2; // // Enumeration values for CaptureRequest#CONTROL_AWB_MODE // /** *

The camera device's auto-white balance routine is disabled.

*

The application-selected color transform matrix * ({@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}) and gains * ({@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains}) are used by the camera * device for manual white balance control.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_OFF = 0; /** *

The camera device's auto-white balance routine is active.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_AUTO = 1; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses incandescent light as the assumed scene * illumination for white balance.

*

While the exact white balance transforms are up to the * camera device, they will approximately match the CIE * standard illuminant A.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_INCANDESCENT = 2; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses fluorescent light as the assumed scene * illumination for white balance.

*

While the exact white balance transforms are up to the * camera device, they will approximately match the CIE * standard illuminant F2.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_FLUORESCENT = 3; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses warm fluorescent light as the assumed scene * illumination for white balance.

*

While the exact white balance transforms are up to the * camera device, they will approximately match the CIE * standard illuminant F4.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_WARM_FLUORESCENT = 4; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses daylight light as the assumed scene * illumination for white balance.

*

While the exact white balance transforms are up to the * camera device, they will approximately match the CIE * standard illuminant D65.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_DAYLIGHT = 5; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses cloudy daylight light as the assumed scene * illumination for white balance.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_CLOUDY_DAYLIGHT = 6; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses twilight light as the assumed scene * illumination for white balance.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_TWILIGHT = 7; /** *

The camera device's auto-white balance routine is disabled; * the camera device uses shade light as the assumed scene * illumination for white balance.

*

The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. * For devices that support the MANUAL_POST_PROCESSING capability, the * values used by the camera device for the transform and gains * will be available in the capture result for this request.

* * @see CaptureRequest#COLOR_CORRECTION_GAINS * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM * @see CaptureRequest#CONTROL_AWB_MODE */ public static final int CONTROL_AWB_MODE_SHADE = 8; // // Enumeration values for CaptureRequest#CONTROL_CAPTURE_INTENT // /** *

The goal of this request doesn't fall into the other * categories. The camera device will default to preview-like * behavior.

* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_CUSTOM = 0; /** *

This request is for a preview-like use case.

*

The precapture trigger may be used to start off a metering * w/flash sequence.

* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_PREVIEW = 1; /** *

This request is for a still capture-type * use case.

*

If the flash unit is under automatic control, it may fire as needed.

* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_STILL_CAPTURE = 2; /** *

This request is for a video recording * use case.

* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_VIDEO_RECORD = 3; /** *

This request is for a video snapshot (still * image while recording video) use case.

*

The camera device should take the highest-quality image * possible (given the other settings) without disrupting the * frame rate of video recording.

* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT = 4; /** *

This request is for a ZSL usecase; the * application will stream full-resolution images and * reprocess one or several later for a final * capture.

* @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG = 5; /** *

This request is for manual capture use case where * the applications want to directly control the capture parameters.

*

For example, the application may wish to manually control * {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, etc.

* * @see CaptureRequest#SENSOR_EXPOSURE_TIME * @see CaptureRequest#SENSOR_SENSITIVITY * @see CaptureRequest#CONTROL_CAPTURE_INTENT */ public static final int CONTROL_CAPTURE_INTENT_MANUAL = 6; // // Enumeration values for CaptureRequest#CONTROL_EFFECT_MODE // /** *

No color effect will be applied.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_OFF = 0; /** *

A "monocolor" effect where the image is mapped into * a single color.

*

This will typically be grayscale.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_MONO = 1; /** *

A "photo-negative" effect where the image's colors * are inverted.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_NEGATIVE = 2; /** *

A "solarisation" effect (Sabattier effect) where the * image is wholly or partially reversed in * tone.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_SOLARIZE = 3; /** *

A "sepia" effect where the image is mapped into warm * gray, red, and brown tones.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_SEPIA = 4; /** *

A "posterization" effect where the image uses * discrete regions of tone rather than a continuous * gradient of tones.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_POSTERIZE = 5; /** *

A "whiteboard" effect where the image is typically displayed * as regions of white, with black or grey details.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_WHITEBOARD = 6; /** *

A "blackboard" effect where the image is typically displayed * as regions of black, with white or grey details.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_BLACKBOARD = 7; /** *

An "aqua" effect where a blue hue is added to the image.

* @see CaptureRequest#CONTROL_EFFECT_MODE */ public static final int CONTROL_EFFECT_MODE_AQUA = 8; // // Enumeration values for CaptureRequest#CONTROL_MODE // /** *

Full application control of pipeline.

*

All control by the device's metering and focusing (3A) * routines is disabled, and no other settings in * android.control.* have any effect, except that * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} may be used by the camera * device to select post-processing values for processing * blocks that do not allow for manual control, or are not * exposed by the camera API.

*

However, the camera device's 3A routines may continue to * collect statistics and update their internal state so that * when control is switched to AUTO mode, good control values * can be immediately applied.

* * @see CaptureRequest#CONTROL_CAPTURE_INTENT * @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_OFF = 0; /** *

Use settings for each individual 3A routine.

*

Manual control of capture parameters is disabled. All * controls in android.control.* besides sceneMode take * effect.

* @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_AUTO = 1; /** *

Use a specific scene mode.

*

Enabling this disables control.aeMode, control.awbMode and * control.afMode controls; the camera device will ignore * those settings while USE_SCENE_MODE is active (except for * FACE_PRIORITY scene mode). Other control entries are still * active. This setting can only be used if scene mode is * supported (i.e. {@link CameraCharacteristics#CONTROL_AVAILABLE_SCENE_MODES android.control.availableSceneModes} * contain some modes other than DISABLED).

* * @see CameraCharacteristics#CONTROL_AVAILABLE_SCENE_MODES * @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_USE_SCENE_MODE = 2; /** *

Same as OFF mode, except that this capture will not be * used by camera device background auto-exposure, auto-white balance and * auto-focus algorithms (3A) to update their statistics.

*

Specifically, the 3A routines are locked to the last * values set from a request with AUTO, OFF, or * USE_SCENE_MODE, and any statistics or state updates * collected from manual captures with OFF_KEEP_STATE will be * discarded by the camera device.

* @see CaptureRequest#CONTROL_MODE */ public static final int CONTROL_MODE_OFF_KEEP_STATE = 3; // // Enumeration values for CaptureRequest#CONTROL_SCENE_MODE // /** *

Indicates that no scene modes are set for a given capture request.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_DISABLED = 0; /** *

If face detection support exists, use face * detection data for auto-focus, auto-white balance, and * auto-exposure routines.

*

If face detection statistics are disabled * (i.e. {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} is set to OFF), * this should still operate correctly (but will not return * face detection statistics to the framework).

*

Unlike the other scene modes, {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}, * {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, and {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} * remain active when FACE_PRIORITY is set.

* * @see CaptureRequest#CONTROL_AE_MODE * @see CaptureRequest#CONTROL_AF_MODE * @see CaptureRequest#CONTROL_AWB_MODE * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_FACE_PRIORITY = 1; /** *

Optimized for photos of quickly moving objects.

*

Similar to SPORTS.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_ACTION = 2; /** *

Optimized for still photos of people.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_PORTRAIT = 3; /** *

Optimized for photos of distant macroscopic objects.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_LANDSCAPE = 4; /** *

Optimized for low-light settings.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_NIGHT = 5; /** *

Optimized for still photos of people in low-light * settings.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_NIGHT_PORTRAIT = 6; /** *

Optimized for dim, indoor settings where flash must * remain off.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_THEATRE = 7; /** *

Optimized for bright, outdoor beach settings.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_BEACH = 8; /** *

Optimized for bright, outdoor settings containing snow.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_SNOW = 9; /** *

Optimized for scenes of the setting sun.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_SUNSET = 10; /** *

Optimized to avoid blurry photos due to small amounts of * device motion (for example: due to hand shake).

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_STEADYPHOTO = 11; /** *

Optimized for nighttime photos of fireworks.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_FIREWORKS = 12; /** *

Optimized for photos of quickly moving people.

*

Similar to ACTION.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_SPORTS = 13; /** *

Optimized for dim, indoor settings with multiple moving * people.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_PARTY = 14; /** *

Optimized for dim settings where the main light source * is a flame.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_CANDLELIGHT = 15; /** *

Optimized for accurately capturing a photo of barcode * for use by camera applications that wish to read the * barcode value.

* @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_BARCODE = 16; /** *

Optimized for high speed video recording (frame rate >=60fps) use case.

*

The supported high speed video sizes and fps ranges are specified in * android.control.availableHighSpeedVideoConfigurations. To get desired * output frame rates, the application is only allowed to select video size * and fps range combinations listed in this static metadata. The fps range * can be control via {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange}.

*

In this mode, the camera device will override aeMode, awbMode, and afMode to * ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing block mode * controls will be overridden to be FAST. Therefore, no manual control of capture * and post-processing parameters is possible. All other controls operate the * same as when {@link CaptureRequest#CONTROL_MODE android.control.mode} == AUTO. This means that all other * android.control.* fields continue to work, such as

*
    *
  • {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange}
    • *
  • {@link CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION android.control.aeExposureCompensation}
    • *
  • {@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock}
    • *
  • {@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}
    • *
  • {@link CaptureRequest#CONTROL_EFFECT_MODE android.control.effectMode}
    • *
  • {@link CaptureRequest#CONTROL_AE_REGIONS android.control.aeRegions}
    • *
  • {@link CaptureRequest#CONTROL_AF_REGIONS android.control.afRegions}
    • *
  • {@link CaptureRequest#CONTROL_AWB_REGIONS android.control.awbRegions}
    • *
  • {@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}
    • *
  • {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}
    • *
*

Outside of android.control.*, the following controls will work:

*
    *
  • {@link CaptureRequest#FLASH_MODE android.flash.mode} (automatic flash for still capture will not work since aeMode is ON)
    • *
  • {@link CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE android.lens.opticalStabilizationMode} (if it is supported)
    • *
  • {@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion}
    • *
  • {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode}
    • *
*

For high speed recording use case, the actual maximum supported frame rate may * be lower than what camera can output, depending on the destination Surfaces for * the image data. For example, if the destination surface is from video encoder, * the application need check if the video encoder is capable of supporting the * high frame rate for a given video size, or it will end up with lower recording * frame rate. If the destination surface is from preview window, the preview frame * rate will be bounded by the screen refresh rate.

*

The camera device will only support up to 2 output high speed streams * (processed non-stalling format defined in android.request.maxNumOutputStreams) * in this mode. This control will be effective only if all of below conditions are true:

*
    *
  • The application created no more than maxNumHighSpeedStreams processed non-stalling * format output streams, where maxNumHighSpeedStreams is calculated as * min(2, android.request.maxNumOutputStreams[Processed (but not-stalling)]).
    • *
  • The stream sizes are selected from the sizes reported by * android.control.availableHighSpeedVideoConfigurations.
    • *
  • No processed non-stalling or raw streams are configured.
    • *
*

When above conditions are NOT satistied, the controls of this mode and * {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange} will be ignored by the camera device, * the camera device will fall back to {@link CaptureRequest#CONTROL_MODE android.control.mode} == AUTO, * and the returned capture result metadata will give the fps range choosen * by the camera device.

*

Switching into or out of this mode may trigger some camera ISP/sensor * reconfigurations, which may introduce extra latency. It is recommended that * the application avoids unnecessary scene mode switch as much as possible.

* * @see CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION * @see CaptureRequest#CONTROL_AE_LOCK * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER * @see CaptureRequest#CONTROL_AE_REGIONS * @see CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE * @see CaptureRequest#CONTROL_AF_REGIONS * @see CaptureRequest#CONTROL_AF_TRIGGER * @see CaptureRequest#CONTROL_AWB_LOCK * @see CaptureRequest#CONTROL_AWB_REGIONS * @see CaptureRequest#CONTROL_EFFECT_MODE * @see CaptureRequest#CONTROL_MODE * @see CaptureRequest#FLASH_MODE * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE * @see CaptureRequest#SCALER_CROP_REGION * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO = 17; /** *

Turn on a device-specific high dynamic range (HDR) mode.

*

In this scene mode, the camera device captures images * that keep a larger range of scene illumination levels * visible in the final image. For example, when taking a * picture of a object in front of a bright window, both * the object and the scene through the window may be * visible when using HDR mode, while in normal AUTO mode, * one or the other may be poorly exposed. As a tradeoff, * HDR mode generally takes much longer to capture a single * image, has no user control, and may have other artifacts * depending on the HDR method used.

*

Therefore, HDR captures operate at a much slower rate * than regular captures.

*

In this mode, on LIMITED or FULL devices, when a request * is made with a {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} of * STILL_CAPTURE, the camera device will capture an image * using a high dynamic range capture technique. On LEGACY * devices, captures that target a JPEG-format output will * be captured with HDR, and the capture intent is not * relevant.

*

The HDR capture may involve the device capturing a burst * of images internally and combining them into one, or it * may involve the device using specialized high dynamic * range capture hardware. In all cases, a single image is * produced in response to a capture request submitted * while in HDR mode.

*

Since substantial post-processing is generally needed to * produce an HDR image, only YUV and JPEG outputs are * supported for LIMITED/FULL device HDR captures, and only * JPEG outputs are supported for LEGACY HDR * captures. Using a RAW output for HDR capture is not * supported.

* * @see CaptureRequest#CONTROL_CAPTURE_INTENT * @see CaptureRequest#CONTROL_SCENE_MODE */ public static final int CONTROL_SCENE_MODE_HDR = 18; // // Enumeration values for CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE // /** *

Video stabilization is disabled.

* @see CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE */ public static final int CONTROL_VIDEO_STABILIZATION_MODE_OFF = 0; /** *

Video stabilization is enabled.

* @see CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE */ public static final int CONTROL_VIDEO_STABILIZATION_MODE_ON = 1; // // Enumeration values for CaptureRequest#EDGE_MODE // /** *

No edge enhancement is applied.

* @see CaptureRequest#EDGE_MODE */ public static final int EDGE_MODE_OFF = 0; /** *

Apply edge enhancement at a quality level that does not slow down frame rate relative to sensor * output

* @see CaptureRequest#EDGE_MODE */ public static final int EDGE_MODE_FAST = 1; /** *

Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.

* @see CaptureRequest#EDGE_MODE */ public static final int EDGE_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#FLASH_MODE // /** *

Do not fire the flash for this capture.

* @see CaptureRequest#FLASH_MODE */ public static final int FLASH_MODE_OFF = 0; /** *

If the flash is available and charged, fire flash * for this capture.

* @see CaptureRequest#FLASH_MODE */ public static final int FLASH_MODE_SINGLE = 1; /** *

Transition flash to continuously on.

* @see CaptureRequest#FLASH_MODE */ public static final int FLASH_MODE_TORCH = 2; // // Enumeration values for CaptureRequest#HOT_PIXEL_MODE // /** *

No hot pixel correction is applied.

*

The frame rate must not be reduced relative to sensor raw output * for this option.

*

The hotpixel map may be returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}.

* * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP * @see CaptureRequest#HOT_PIXEL_MODE */ public static final int HOT_PIXEL_MODE_OFF = 0; /** *

Hot pixel correction is applied, without reducing frame * rate relative to sensor raw output.

*

The hotpixel map may be returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}.

* * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP * @see CaptureRequest#HOT_PIXEL_MODE */ public static final int HOT_PIXEL_MODE_FAST = 1; /** *

High-quality hot pixel correction is applied, at a cost * of possibly reduced frame rate relative to sensor raw output.

*

The hotpixel map may be returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}.

* * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP * @see CaptureRequest#HOT_PIXEL_MODE */ public static final int HOT_PIXEL_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE // /** *

Optical stabilization is unavailable.

* @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE */ public static final int LENS_OPTICAL_STABILIZATION_MODE_OFF = 0; /** *

Optical stabilization is enabled.

* @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE */ public static final int LENS_OPTICAL_STABILIZATION_MODE_ON = 1; // // Enumeration values for CaptureRequest#NOISE_REDUCTION_MODE // /** *

No noise reduction is applied.

* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_OFF = 0; /** *

Noise reduction is applied without reducing frame rate relative to sensor * output.

* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_FAST = 1; /** *

High-quality noise reduction is applied, at the cost of possibly reduced frame * rate relative to sensor output.

* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_HIGH_QUALITY = 2; /** *

MINIMAL noise reduction is applied without reducing frame rate relative to * sensor output.

* @see CaptureRequest#NOISE_REDUCTION_MODE */ public static final int NOISE_REDUCTION_MODE_MINIMAL = 3; // // Enumeration values for CaptureRequest#SENSOR_TEST_PATTERN_MODE // /** *

No test pattern mode is used, and the camera * device returns captures from the image sensor.

*

This is the default if the key is not set.

* @see CaptureRequest#SENSOR_TEST_PATTERN_MODE */ public static final int SENSOR_TEST_PATTERN_MODE_OFF = 0; /** *

Each pixel in [R, G_even, G_odd, B] is replaced by its * respective color channel provided in * {@link CaptureRequest#SENSOR_TEST_PATTERN_DATA android.sensor.testPatternData}.

*

For example:

* 
android.testPatternData = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0]
     *
*

All green pixels are 100% green. All red/blue pixels are black.

* 
android.testPatternData = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0]
     *
*

All red pixels are 100% red. Only the odd green pixels * are 100% green. All blue pixels are 100% black.

* * @see CaptureRequest#SENSOR_TEST_PATTERN_DATA * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE */ public static final int SENSOR_TEST_PATTERN_MODE_SOLID_COLOR = 1; /** *

All pixel data is replaced with an 8-bar color pattern.

*

The vertical bars (left-to-right) are as follows:

*
    *
  • 100% white
    • *
  • yellow
    • *
  • cyan
    • *
  • green
    • *
  • magenta
    • *
  • red
    • *
  • blue
    • *
  • black
    • *
*

In general the image would look like the following:

* 
W Y C G M R B K
     * W Y C G M R B K
     * W Y C G M R B K
     * W Y C G M R B K
     * W Y C G M R B K
     * . . . . . . . .
     * . . . . . . . .
     * . . . . . . . .
     *
     * (B = Blue, K = Black)
     *
*

Each bar should take up 1/8 of the sensor pixel array width. * When this is not possible, the bar size should be rounded * down to the nearest integer and the pattern can repeat * on the right side.

*

Each bar's height must always take up the full sensor * pixel array height.

*

Each pixel in this test pattern must be set to either * 0% intensity or 100% intensity.

* @see CaptureRequest#SENSOR_TEST_PATTERN_MODE */ public static final int SENSOR_TEST_PATTERN_MODE_COLOR_BARS = 2; /** *

The test pattern is similar to COLOR_BARS, except that * each bar should start at its specified color at the top, * and fade to gray at the bottom.

*

Furthermore each bar is further subdivided into a left and * right half. The left half should have a smooth gradient, * and the right half should have a quantized gradient.

*

In particular, the right half's should consist of blocks of the * same color for 1/16th active sensor pixel array width.

*

The least significant bits in the quantized gradient should * be copied from the most significant bits of the smooth gradient.

*

The height of each bar should always be a multiple of 128. * When this is not the case, the pattern should repeat at the bottom * of the image.

* @see CaptureRequest#SENSOR_TEST_PATTERN_MODE */ public static final int SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY = 3; /** *

All pixel data is replaced by a pseudo-random sequence * generated from a PN9 512-bit sequence (typically implemented * in hardware with a linear feedback shift register).

*

The generator should be reset at the beginning of each frame, * and thus each subsequent raw frame with this test pattern should * be exactly the same as the last.

* @see CaptureRequest#SENSOR_TEST_PATTERN_MODE */ public static final int SENSOR_TEST_PATTERN_MODE_PN9 = 4; /** *

The first custom test pattern. All custom patterns that are * available only on this camera device are at least this numeric * value.

*

All of the custom test patterns will be static * (that is the raw image must not vary from frame to frame).

* @see CaptureRequest#SENSOR_TEST_PATTERN_MODE */ public static final int SENSOR_TEST_PATTERN_MODE_CUSTOM1 = 256; // // Enumeration values for CaptureRequest#SHADING_MODE // /** *

No lens shading correction is applied.

* @see CaptureRequest#SHADING_MODE */ public static final int SHADING_MODE_OFF = 0; /** *

Apply lens shading corrections, without slowing * frame rate relative to sensor raw output

* @see CaptureRequest#SHADING_MODE */ public static final int SHADING_MODE_FAST = 1; /** *

Apply high-quality lens shading correction, at the * cost of possibly reduced frame rate.

* @see CaptureRequest#SHADING_MODE */ public static final int SHADING_MODE_HIGH_QUALITY = 2; // // Enumeration values for CaptureRequest#STATISTICS_FACE_DETECT_MODE // /** *

Do not include face detection statistics in capture * results.

* @see CaptureRequest#STATISTICS_FACE_DETECT_MODE */ public static final int STATISTICS_FACE_DETECT_MODE_OFF = 0; /** *

Return face rectangle and confidence values only.

* @see CaptureRequest#STATISTICS_FACE_DETECT_MODE */ public static final int STATISTICS_FACE_DETECT_MODE_SIMPLE = 1; /** *

Return all face * metadata.

*

In this mode, face rectangles, scores, landmarks, and face IDs are all valid.

* @see CaptureRequest#STATISTICS_FACE_DETECT_MODE */ public static final int STATISTICS_FACE_DETECT_MODE_FULL = 2; // // Enumeration values for CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE // /** *

Do not include a lens shading map in the capture result.

* @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE */ public static final int STATISTICS_LENS_SHADING_MAP_MODE_OFF = 0; /** *

Include a lens shading map in the capture result.

* @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE */ public static final int STATISTICS_LENS_SHADING_MAP_MODE_ON = 1; // // Enumeration values for CaptureRequest#TONEMAP_MODE // /** *

Use the tone mapping curve specified in * the {@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}* entries.

*

All color enhancement and tonemapping must be disabled, except * for applying the tonemapping curve specified by * {@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}.

*

Must not slow down frame rate relative to raw * sensor output.

* * @see CaptureRequest#TONEMAP_CURVE * @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_CONTRAST_CURVE = 0; /** *

Advanced gamma mapping and color enhancement may be applied, without * reducing frame rate compared to raw sensor output.

* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_FAST = 1; /** *

High-quality gamma mapping and color enhancement will be applied, at * the cost of possibly reduced frame rate compared to raw sensor output.

* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_HIGH_QUALITY = 2; /** *

Use the gamma value specified in android.tonemap.gamma to peform * tonemapping.

*

All color enhancement and tonemapping must be disabled, except * for applying the tonemapping curve specified by android.tonemap.gamma.

*

Must not slow down frame rate relative to raw sensor output.

* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_GAMMA_VALUE = 3; /** *

Use the preset tonemapping curve specified in * android.tonemap.presetCurve to peform tonemapping.

*

All color enhancement and tonemapping must be disabled, except * for applying the tonemapping curve specified by * android.tonemap.presetCurve.

*

Must not slow down frame rate relative to raw sensor output.

* @see CaptureRequest#TONEMAP_MODE */ public static final int TONEMAP_MODE_PRESET_CURVE = 4; // // Enumeration values for CaptureRequest#TONEMAP_PRESET_CURVE // /** *

Tonemapping curve is defined by sRGB

* @see CaptureRequest#TONEMAP_PRESET_CURVE */ public static final int TONEMAP_PRESET_CURVE_SRGB = 0; /** *

Tonemapping curve is defined by ITU-R BT.709

* @see CaptureRequest#TONEMAP_PRESET_CURVE */ public static final int TONEMAP_PRESET_CURVE_REC709 = 1; // // Enumeration values for CaptureResult#CONTROL_AE_STATE // /** *

AE is off or recently reset.

*

When a camera device is opened, it starts in * this state. This is a transient state, the camera device may skip reporting * this state in capture result.

* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_INACTIVE = 0; /** *

AE doesn't yet have a good set of control values * for the current scene.

*

This is a transient state, the camera device may skip * reporting this state in capture result.

* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_SEARCHING = 1; /** *

AE has a good set of control values for the * current scene.

* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_CONVERGED = 2; /** *

AE has been locked.

* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_LOCKED = 3; /** *

AE has a good set of control values, but flash * needs to be fired for good quality still * capture.

* @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_FLASH_REQUIRED = 4; /** *

AE has been asked to do a precapture sequence * and is currently executing it.

*

Precapture can be triggered through setting * {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} to START. Currently * active and completed (if it causes camera device internal AE lock) precapture * metering sequence can be canceled through setting * {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} to CANCEL.

*

Once PRECAPTURE completes, AE will transition to CONVERGED * or FLASH_REQUIRED as appropriate. This is a transient * state, the camera device may skip reporting this state in * capture result.

* * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER * @see CaptureResult#CONTROL_AE_STATE */ public static final int CONTROL_AE_STATE_PRECAPTURE = 5; // // Enumeration values for CaptureResult#CONTROL_AF_STATE // /** *

AF is off or has not yet tried to scan/been asked * to scan.

*

When a camera device is opened, it starts in this * state. This is a transient state, the camera device may * skip reporting this state in capture * result.

* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_INACTIVE = 0; /** *

AF is currently performing an AF scan initiated the * camera device in a continuous autofocus mode.

*

Only used by CONTINUOUS_* AF modes. This is a transient * state, the camera device may skip reporting this state in * capture result.

* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_PASSIVE_SCAN = 1; /** *

AF currently believes it is in focus, but may * restart scanning at any time.

*

Only used by CONTINUOUS_* AF modes. This is a transient * state, the camera device may skip reporting this state in * capture result.

* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_PASSIVE_FOCUSED = 2; /** *

AF is performing an AF scan because it was * triggered by AF trigger.

*

Only used by AUTO or MACRO AF modes. This is a transient * state, the camera device may skip reporting this state in * capture result.

* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_ACTIVE_SCAN = 3; /** *

AF believes it is focused correctly and has locked * focus.

*

This state is reached only after an explicit START AF trigger has been * sent ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}), when good focus has been obtained.

*

The lens will remain stationary until the AF mode ({@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}) is changed or * a new AF trigger is sent to the camera device ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}).

* * @see CaptureRequest#CONTROL_AF_MODE * @see CaptureRequest#CONTROL_AF_TRIGGER * @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_FOCUSED_LOCKED = 4; /** *

AF has failed to focus successfully and has locked * focus.

*

This state is reached only after an explicit START AF trigger has been * sent ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}), when good focus cannot be obtained.

*

The lens will remain stationary until the AF mode ({@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}) is changed or * a new AF trigger is sent to the camera device ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}).

* * @see CaptureRequest#CONTROL_AF_MODE * @see CaptureRequest#CONTROL_AF_TRIGGER * @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_NOT_FOCUSED_LOCKED = 5; /** *

AF finished a passive scan without finding focus, * and may restart scanning at any time.

*

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera * device may skip reporting this state in capture result.

*

LEGACY camera devices do not support this state. When a passive * scan has finished, it will always go to PASSIVE_FOCUSED.

* @see CaptureResult#CONTROL_AF_STATE */ public static final int CONTROL_AF_STATE_PASSIVE_UNFOCUSED = 6; // // Enumeration values for CaptureResult#CONTROL_AWB_STATE // /** *

AWB is not in auto mode, or has not yet started metering.

*

When a camera device is opened, it starts in this * state. This is a transient state, the camera device may * skip reporting this state in capture * result.

* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_INACTIVE = 0; /** *

AWB doesn't yet have a good set of control * values for the current scene.

*

This is a transient state, the camera device * may skip reporting this state in capture result.

* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_SEARCHING = 1; /** *

AWB has a good set of control values for the * current scene.

* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_CONVERGED = 2; /** *

AWB has been locked.

* @see CaptureResult#CONTROL_AWB_STATE */ public static final int CONTROL_AWB_STATE_LOCKED = 3; // // Enumeration values for CaptureResult#FLASH_STATE // /** *

No flash on camera.

* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_UNAVAILABLE = 0; /** *

Flash is charging and cannot be fired.

* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_CHARGING = 1; /** *

Flash is ready to fire.

* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_READY = 2; /** *

Flash fired for this capture.

* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_FIRED = 3; /** *

Flash partially illuminated this frame.

*

This is usually due to the next or previous frame having * the flash fire, and the flash spilling into this capture * due to hardware limitations.

* @see CaptureResult#FLASH_STATE */ public static final int FLASH_STATE_PARTIAL = 4; // // Enumeration values for CaptureResult#LENS_STATE // /** *

The lens parameters ({@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}, {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}, * {@link CaptureRequest#LENS_FILTER_DENSITY android.lens.filterDensity} and {@link CaptureRequest#LENS_APERTURE android.lens.aperture}) are not changing.

* * @see CaptureRequest#LENS_APERTURE * @see CaptureRequest#LENS_FILTER_DENSITY * @see CaptureRequest#LENS_FOCAL_LENGTH * @see CaptureRequest#LENS_FOCUS_DISTANCE * @see CaptureResult#LENS_STATE */ public static final int LENS_STATE_STATIONARY = 0; /** *

One or several of the lens parameters * ({@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}, {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}, * {@link CaptureRequest#LENS_FILTER_DENSITY android.lens.filterDensity} or {@link CaptureRequest#LENS_APERTURE android.lens.aperture}) is * currently changing.

* * @see CaptureRequest#LENS_APERTURE * @see CaptureRequest#LENS_FILTER_DENSITY * @see CaptureRequest#LENS_FOCAL_LENGTH * @see CaptureRequest#LENS_FOCUS_DISTANCE * @see CaptureResult#LENS_STATE */ public static final int LENS_STATE_MOVING = 1; // // Enumeration values for CaptureResult#STATISTICS_SCENE_FLICKER // /** *

The camera device does not detect any flickering illumination * in the current scene.

* @see CaptureResult#STATISTICS_SCENE_FLICKER */ public static final int STATISTICS_SCENE_FLICKER_NONE = 0; /** *

The camera device detects illumination flickering at 50Hz * in the current scene.

* @see CaptureResult#STATISTICS_SCENE_FLICKER */ public static final int STATISTICS_SCENE_FLICKER_50HZ = 1; /** *

The camera device detects illumination flickering at 60Hz * in the current scene.

* @see CaptureResult#STATISTICS_SCENE_FLICKER */ public static final int STATISTICS_SCENE_FLICKER_60HZ = 2; // // Enumeration values for CaptureResult#SYNC_FRAME_NUMBER // /** *

The current result is not yet fully synchronized to any request.

*

Synchronization is in progress, and reading metadata from this * result may include a mix of data that have taken effect since the * last synchronization time.

*

In some future result, within {@link CameraCharacteristics#SYNC_MAX_LATENCY android.sync.maxLatency} frames, * this value will update to the actual frame number frame number * the result is guaranteed to be synchronized to (as long as the * request settings remain constant).

* * @see CameraCharacteristics#SYNC_MAX_LATENCY * @see CaptureResult#SYNC_FRAME_NUMBER * @hide */ public static final int SYNC_FRAME_NUMBER_CONVERGING = -1; /** *

The current result's synchronization status is unknown.

*

The result may have already converged, or it may be in * progress. Reading from this result may include some mix * of settings from past requests.

*

After a settings change, the new settings will eventually all * take effect for the output buffers and results. However, this * value will not change when that happens. Altering settings * rapidly may provide outcomes using mixes of settings from recent * requests.

*

This value is intended primarily for backwards compatibility with * the older camera implementations (for android.hardware.Camera).

* @see CaptureResult#SYNC_FRAME_NUMBER * @hide */ public static final int SYNC_FRAME_NUMBER_UNKNOWN = -2; /*~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ * End generated code *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~O@*/ }