/* * Copyright (C) 2011 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package android.view; import android.animation.Animator; import android.animation.TimeInterpolator; import android.animation.ValueAnimator; import java.util.ArrayList; import java.util.HashMap; import java.util.Set; /** * This class enables automatic and optimized animation of select properties on View objects. * If only one or two properties on a View object are being animated, then using an * {@link android.animation.ObjectAnimator} is fine; the property setters called by ObjectAnimator * are well equipped to do the right thing to set the property and invalidate the view * appropriately. But if several properties are animated simultaneously, or if you just want a * more convenient syntax to animate a specific property, then ViewPropertyAnimator might be * more well-suited to the task. * *

This class may provide better performance for several simultaneous animations, because * it will optimize invalidate calls to take place only once for several properties instead of each * animated property independently causing its own invalidation. Also, the syntax of using this * class could be easier to use because the caller need only tell the View object which * property to animate, and the value to animate either to or by, and this class handles the * details of configuring the underlying Animator class and starting it.

* *

This class is not constructed by the caller, but rather by the View whose properties * it will animate. Calls to {@link android.view.View#animate()} will return a reference * to the appropriate ViewPropertyAnimator object for that View.

* */ public class ViewPropertyAnimator { /** * The View whose properties are being animated by this class. This is set at * construction time. */ final View mView; /** * The duration of the underlying Animator object. By default, we don't set the duration * on the Animator and just use its default duration. If the duration is ever set on this * Animator, then we use the duration that it was set to. */ private long mDuration; /** * A flag indicating whether the duration has been set on this object. If not, we don't set * the duration on the underlying Animator, but instead just use its default duration. */ private boolean mDurationSet = false; /** * The startDelay of the underlying Animator object. By default, we don't set the startDelay * on the Animator and just use its default startDelay. If the startDelay is ever set on this * Animator, then we use the startDelay that it was set to. */ private long mStartDelay = 0; /** * A flag indicating whether the startDelay has been set on this object. If not, we don't set * the startDelay on the underlying Animator, but instead just use its default startDelay. */ private boolean mStartDelaySet = false; /** * The interpolator of the underlying Animator object. By default, we don't set the interpolator * on the Animator and just use its default interpolator. If the interpolator is ever set on * this Animator, then we use the interpolator that it was set to. */ private TimeInterpolator mInterpolator; /** * A flag indicating whether the interpolator has been set on this object. If not, we don't set * the interpolator on the underlying Animator, but instead just use its default interpolator. */ private boolean mInterpolatorSet = false; /** * Listener for the lifecycle events of the underlying ValueAnimator object. */ private Animator.AnimatorListener mListener = null; /** * Listener for the update events of the underlying ValueAnimator object. */ private ValueAnimator.AnimatorUpdateListener mUpdateListener = null; /** * A lazily-created ValueAnimator used in order to get some default animator properties * (duration, start delay, interpolator, etc.). */ private ValueAnimator mTempValueAnimator; /** * A RenderThread-driven backend that may intercept startAnimation */ private ViewPropertyAnimatorRT mRTBackend; /** * This listener is the mechanism by which the underlying Animator causes changes to the * properties currently being animated, as well as the cleanup after an animation is * complete. */ private AnimatorEventListener mAnimatorEventListener = new AnimatorEventListener(); /** * This list holds the properties that have been asked to animate. We allow the caller to * request several animations prior to actually starting the underlying animator. This * enables us to run one single animator to handle several properties in parallel. Each * property is tossed onto the pending list until the animation actually starts (which is * done by posting it onto mView), at which time the pending list is cleared and the properties * on that list are added to the list of properties associated with that animator. */ ArrayList mPendingAnimations = new ArrayList(); private Runnable mPendingSetupAction; private Runnable mPendingCleanupAction; private Runnable mPendingOnStartAction; private Runnable mPendingOnEndAction; /** * Constants used to associate a property being requested and the mechanism used to set * the property (this class calls directly into View to set the properties in question). */ static final int NONE = 0x0000; static final int TRANSLATION_X = 0x0001; static final int TRANSLATION_Y = 0x0002; static final int TRANSLATION_Z = 0x0004; static final int SCALE_X = 0x0008; static final int SCALE_Y = 0x0010; static final int ROTATION = 0x0020; static final int ROTATION_X = 0x0040; static final int ROTATION_Y = 0x0080; static final int X = 0x0100; static final int Y = 0x0200; static final int Z = 0x0400; static final int ALPHA = 0x0800; private static final int TRANSFORM_MASK = TRANSLATION_X | TRANSLATION_Y | TRANSLATION_Z | SCALE_X | SCALE_Y | ROTATION | ROTATION_X | ROTATION_Y | X | Y | Z; /** * The mechanism by which the user can request several properties that are then animated * together works by posting this Runnable to start the underlying Animator. Every time * a property animation is requested, we cancel any previous postings of the Runnable * and re-post it. This means that we will only ever run the Runnable (and thus start the * underlying animator) after the caller is done setting the properties that should be * animated together. */ private Runnable mAnimationStarter = new Runnable() { @Override public void run() { startAnimation(); } }; /** * This class holds information about the overall animation being run on the set of * properties. The mask describes which properties are being animated and the * values holder is the list of all property/value objects. */ private static class PropertyBundle { int mPropertyMask; ArrayList mNameValuesHolder; PropertyBundle(int propertyMask, ArrayList nameValuesHolder) { mPropertyMask = propertyMask; mNameValuesHolder = nameValuesHolder; } /** * Removes the given property from being animated as a part of this * PropertyBundle. If the property was a part of this bundle, it returns * true to indicate that it was, in fact, canceled. This is an indication * to the caller that a cancellation actually occurred. * * @param propertyConstant The property whose cancellation is requested. * @return true if the given property is a part of this bundle and if it * has therefore been canceled. */ boolean cancel(int propertyConstant) { if ((mPropertyMask & propertyConstant) != 0 && mNameValuesHolder != null) { int count = mNameValuesHolder.size(); for (int i = 0; i < count; ++i) { NameValuesHolder nameValuesHolder = mNameValuesHolder.get(i); if (nameValuesHolder.mNameConstant == propertyConstant) { mNameValuesHolder.remove(i); mPropertyMask &= ~propertyConstant; return true; } } } return false; } } /** * This list tracks the list of properties being animated by any particular animator. * In most situations, there would only ever be one animator running at a time. But it is * possible to request some properties to animate together, then while those properties * are animating, to request some other properties to animate together. The way that * works is by having this map associate the group of properties being animated with the * animator handling the animation. On every update event for an Animator, we ask the * map for the associated properties and set them accordingly. */ private HashMap mAnimatorMap = new HashMap(); private HashMap mAnimatorSetupMap; private HashMap mAnimatorCleanupMap; private HashMap mAnimatorOnStartMap; private HashMap mAnimatorOnEndMap; /** * This is the information we need to set each property during the animation. * mNameConstant is used to set the appropriate field in View, and the from/delta * values are used to calculate the animated value for a given animation fraction * during the animation. */ static class NameValuesHolder { int mNameConstant; float mFromValue; float mDeltaValue; NameValuesHolder(int nameConstant, float fromValue, float deltaValue) { mNameConstant = nameConstant; mFromValue = fromValue; mDeltaValue = deltaValue; } } /** * Constructor, called by View. This is private by design, as the user should only * get a ViewPropertyAnimator by calling View.animate(). * * @param view The View associated with this ViewPropertyAnimator */ ViewPropertyAnimator(View view) { mView = view; view.ensureTransformationInfo(); } /** * Sets the duration for the underlying animator that animates the requested properties. * By default, the animator uses the default value for ValueAnimator. Calling this method * will cause the declared value to be used instead. * @param duration The length of ensuing property animations, in milliseconds. The value * cannot be negative. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator setDuration(long duration) { if (duration < 0) { throw new IllegalArgumentException("Animators cannot have negative duration: " + duration); } mDurationSet = true; mDuration = duration; return this; } /** * Returns the current duration of property animations. If the duration was set on this * object, that value is returned. Otherwise, the default value of the underlying Animator * is returned. * * @see #setDuration(long) * @return The duration of animations, in milliseconds. */ public long getDuration() { if (mDurationSet) { return mDuration; } else { // Just return the default from ValueAnimator, since that's what we'd get if // the value has not been set otherwise if (mTempValueAnimator == null) { mTempValueAnimator = new ValueAnimator(); } return mTempValueAnimator.getDuration(); } } /** * Returns the current startDelay of property animations. If the startDelay was set on this * object, that value is returned. Otherwise, the default value of the underlying Animator * is returned. * * @see #setStartDelay(long) * @return The startDelay of animations, in milliseconds. */ public long getStartDelay() { if (mStartDelaySet) { return mStartDelay; } else { // Just return the default from ValueAnimator (0), since that's what we'd get if // the value has not been set otherwise return 0; } } /** * Sets the startDelay for the underlying animator that animates the requested properties. * By default, the animator uses the default value for ValueAnimator. Calling this method * will cause the declared value to be used instead. * @param startDelay The delay of ensuing property animations, in milliseconds. The value * cannot be negative. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator setStartDelay(long startDelay) { if (startDelay < 0) { throw new IllegalArgumentException("Animators cannot have negative start " + "delay: " + startDelay); } mStartDelaySet = true; mStartDelay = startDelay; return this; } /** * Sets the interpolator for the underlying animator that animates the requested properties. * By default, the animator uses the default interpolator for ValueAnimator. Calling this method * will cause the declared object to be used instead. * * @param interpolator The TimeInterpolator to be used for ensuing property animations. A value * of null will result in linear interpolation. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator setInterpolator(TimeInterpolator interpolator) { mInterpolatorSet = true; mInterpolator = interpolator; return this; } /** * Returns the timing interpolator that this animation uses. * * @return The timing interpolator for this animation. */ public TimeInterpolator getInterpolator() { if (mInterpolatorSet) { return mInterpolator; } else { // Just return the default from ValueAnimator, since that's what we'd get if // the value has not been set otherwise if (mTempValueAnimator == null) { mTempValueAnimator = new ValueAnimator(); } return mTempValueAnimator.getInterpolator(); } } /** * Sets a listener for events in the underlying Animators that run the property * animations. * * @see Animator.AnimatorListener * * @param listener The listener to be called with AnimatorListener events. A value of * null removes any existing listener. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator setListener(Animator.AnimatorListener listener) { mListener = listener; return this; } Animator.AnimatorListener getListener() { return mListener; } /** * Sets a listener for update events in the underlying ValueAnimator that runs * the property animations. Note that the underlying animator is animating between * 0 and 1 (these values are then turned into the actual property values internally * by ViewPropertyAnimator). So the animator cannot give information on the current * values of the properties being animated by this ViewPropertyAnimator, although * the view object itself can be queried to get the current values. * * @see android.animation.ValueAnimator.AnimatorUpdateListener * * @param listener The listener to be called with update events. A value of * null removes any existing listener. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator setUpdateListener(ValueAnimator.AnimatorUpdateListener listener) { mUpdateListener = listener; return this; } ValueAnimator.AnimatorUpdateListener getUpdateListener() { return mUpdateListener; } /** * Starts the currently pending property animations immediately. Calling start() * is optional because all animations start automatically at the next opportunity. However, * if the animations are needed to start immediately and synchronously (not at the time when * the next event is processed by the hierarchy, which is when the animations would begin * otherwise), then this method can be used. */ public void start() { mView.removeCallbacks(mAnimationStarter); startAnimation(); } /** * Cancels all property animations that are currently running or pending. */ public void cancel() { if (mAnimatorMap.size() > 0) { HashMap mAnimatorMapCopy = (HashMap)mAnimatorMap.clone(); Set animatorSet = mAnimatorMapCopy.keySet(); for (Animator runningAnim : animatorSet) { runningAnim.cancel(); } } mPendingAnimations.clear(); mPendingSetupAction = null; mPendingCleanupAction = null; mPendingOnStartAction = null; mPendingOnEndAction = null; mView.removeCallbacks(mAnimationStarter); if (mRTBackend != null) { mRTBackend.cancelAll(); } } /** * This method will cause the View's x property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator x(float value) { animateProperty(X, value); return this; } /** * This method will cause the View's x property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator xBy(float value) { animatePropertyBy(X, value); return this; } /** * This method will cause the View's y property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator y(float value) { animateProperty(Y, value); return this; } /** * This method will cause the View's y property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator yBy(float value) { animatePropertyBy(Y, value); return this; } /** * This method will cause the View's z property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setZ(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator z(float value) { animateProperty(Z, value); return this; } /** * This method will cause the View's z property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setZ(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator zBy(float value) { animatePropertyBy(Z, value); return this; } /** * This method will cause the View's rotation property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setRotation(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator rotation(float value) { animateProperty(ROTATION, value); return this; } /** * This method will cause the View's rotation property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setRotation(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator rotationBy(float value) { animatePropertyBy(ROTATION, value); return this; } /** * This method will cause the View's rotationX property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setRotationX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator rotationX(float value) { animateProperty(ROTATION_X, value); return this; } /** * This method will cause the View's rotationX property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setRotationX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator rotationXBy(float value) { animatePropertyBy(ROTATION_X, value); return this; } /** * This method will cause the View's rotationY property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setRotationY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator rotationY(float value) { animateProperty(ROTATION_Y, value); return this; } /** * This method will cause the View's rotationY property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setRotationY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator rotationYBy(float value) { animatePropertyBy(ROTATION_Y, value); return this; } /** * This method will cause the View's translationX property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setTranslationX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator translationX(float value) { animateProperty(TRANSLATION_X, value); return this; } /** * This method will cause the View's translationX property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setTranslationX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator translationXBy(float value) { animatePropertyBy(TRANSLATION_X, value); return this; } /** * This method will cause the View's translationY property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setTranslationY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator translationY(float value) { animateProperty(TRANSLATION_Y, value); return this; } /** * This method will cause the View's translationY property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setTranslationY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator translationYBy(float value) { animatePropertyBy(TRANSLATION_Y, value); return this; } /** * This method will cause the View's translationZ property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setTranslationZ(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator translationZ(float value) { animateProperty(TRANSLATION_Z, value); return this; } /** * This method will cause the View's translationZ property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setTranslationZ(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator translationZBy(float value) { animatePropertyBy(TRANSLATION_Z, value); return this; } /** * This method will cause the View's scaleX property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setScaleX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator scaleX(float value) { animateProperty(SCALE_X, value); return this; } /** * This method will cause the View's scaleX property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setScaleX(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator scaleXBy(float value) { animatePropertyBy(SCALE_X, value); return this; } /** * This method will cause the View's scaleY property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setScaleY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator scaleY(float value) { animateProperty(SCALE_Y, value); return this; } /** * This method will cause the View's scaleY property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setScaleY(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator scaleYBy(float value) { animatePropertyBy(SCALE_Y, value); return this; } /** * This method will cause the View's alpha property to be animated to the * specified value. Animations already running on the property will be canceled. * * @param value The value to be animated to. * @see View#setAlpha(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator alpha(float value) { animateProperty(ALPHA, value); return this; } /** * This method will cause the View's alpha property to be animated by the * specified value. Animations already running on the property will be canceled. * * @param value The amount to be animated by, as an offset from the current value. * @see View#setAlpha(float) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator alphaBy(float value) { animatePropertyBy(ALPHA, value); return this; } /** * The View associated with this ViewPropertyAnimator will have its * {@link View#setLayerType(int, android.graphics.Paint) layer type} set to * {@link View#LAYER_TYPE_HARDWARE} for the duration of the next animation. * As stated in the documentation for {@link View#LAYER_TYPE_HARDWARE}, * the actual type of layer used internally depends on the runtime situation of the * view. If the activity and this view are hardware-accelerated, then the layer will be * accelerated as well. If the activity or the view is not accelerated, then the layer will * effectively be the same as {@link View#LAYER_TYPE_SOFTWARE}. * *

This state is not persistent, either on the View or on this ViewPropertyAnimator: the * layer type of the View will be restored when the animation ends to what it was when this * method was called, and this setting on ViewPropertyAnimator is only valid for the next * animation. Note that calling this method and then independently setting the layer type of * the View (by a direct call to {@link View#setLayerType(int, android.graphics.Paint)}) will * result in some inconsistency, including having the layer type restored to its pre-withLayer() * value when the animation ends.

* * @see View#setLayerType(int, android.graphics.Paint) * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator withLayer() { mPendingSetupAction= new Runnable() { @Override public void run() { mView.setLayerType(View.LAYER_TYPE_HARDWARE, null); if (mView.isAttachedToWindow()) { mView.buildLayer(); } } }; final int currentLayerType = mView.getLayerType(); mPendingCleanupAction = new Runnable() { @Override public void run() { mView.setLayerType(currentLayerType, null); } }; if (mAnimatorSetupMap == null) { mAnimatorSetupMap = new HashMap(); } if (mAnimatorCleanupMap == null) { mAnimatorCleanupMap = new HashMap(); } return this; } /** * Specifies an action to take place when the next animation runs. If there is a * {@link #setStartDelay(long) startDelay} set on this ViewPropertyAnimator, then the * action will run after that startDelay expires, when the actual animation begins. * This method, along with {@link #withEndAction(Runnable)}, is intended to help facilitate * choreographing ViewPropertyAnimator animations with other animations or actions * in the application. * * @param runnable The action to run when the next animation starts. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator withStartAction(Runnable runnable) { mPendingOnStartAction = runnable; if (runnable != null && mAnimatorOnStartMap == null) { mAnimatorOnStartMap = new HashMap(); } return this; } /** * Specifies an action to take place when the next animation ends. The action is only * run if the animation ends normally; if the ViewPropertyAnimator is canceled during * that animation, the runnable will not run. * This method, along with {@link #withStartAction(Runnable)}, is intended to help facilitate * choreographing ViewPropertyAnimator animations with other animations or actions * in the application. * *

For example, the following code animates a view to x=200 and then back to 0:

*
     *     Runnable endAction = new Runnable() {
     *         public void run() {
     *             view.animate().x(0);
     *         }
     *     };
     *     view.animate().x(200).withEndAction(endAction);
     * 
* * @param runnable The action to run when the next animation ends. * @return This object, allowing calls to methods in this class to be chained. */ public ViewPropertyAnimator withEndAction(Runnable runnable) { mPendingOnEndAction = runnable; if (runnable != null && mAnimatorOnEndMap == null) { mAnimatorOnEndMap = new HashMap(); } return this; } boolean hasActions() { return mPendingSetupAction != null || mPendingCleanupAction != null || mPendingOnStartAction != null || mPendingOnEndAction != null; } /** * Starts the underlying Animator for a set of properties. We use a single animator that * simply runs from 0 to 1, and then use that fractional value to set each property * value accordingly. */ private void startAnimation() { if (mRTBackend != null && mRTBackend.startAnimation(this)) { return; } mView.setHasTransientState(true); ValueAnimator animator = ValueAnimator.ofFloat(1.0f); ArrayList nameValueList = (ArrayList) mPendingAnimations.clone(); mPendingAnimations.clear(); int propertyMask = 0; int propertyCount = nameValueList.size(); for (int i = 0; i < propertyCount; ++i) { NameValuesHolder nameValuesHolder = nameValueList.get(i); propertyMask |= nameValuesHolder.mNameConstant; } mAnimatorMap.put(animator, new PropertyBundle(propertyMask, nameValueList)); if (mPendingSetupAction != null) { mAnimatorSetupMap.put(animator, mPendingSetupAction); mPendingSetupAction = null; } if (mPendingCleanupAction != null) { mAnimatorCleanupMap.put(animator, mPendingCleanupAction); mPendingCleanupAction = null; } if (mPendingOnStartAction != null) { mAnimatorOnStartMap.put(animator, mPendingOnStartAction); mPendingOnStartAction = null; } if (mPendingOnEndAction != null) { mAnimatorOnEndMap.put(animator, mPendingOnEndAction); mPendingOnEndAction = null; } animator.addUpdateListener(mAnimatorEventListener); animator.addListener(mAnimatorEventListener); if (mStartDelaySet) { animator.setStartDelay(mStartDelay); } if (mDurationSet) { animator.setDuration(mDuration); } if (mInterpolatorSet) { animator.setInterpolator(mInterpolator); } animator.start(); } /** * Utility function, called by the various x(), y(), etc. methods. This stores the * constant name for the property along with the from/delta values that will be used to * calculate and set the property during the animation. This structure is added to the * pending animations, awaiting the eventual start() of the underlying animator. A * Runnable is posted to start the animation, and any pending such Runnable is canceled * (which enables us to end up starting just one animator for all of the properties * specified at one time). * * @param constantName The specifier for the property being animated * @param toValue The value to which the property will animate */ private void animateProperty(int constantName, float toValue) { float fromValue = getValue(constantName); float deltaValue = toValue - fromValue; animatePropertyBy(constantName, fromValue, deltaValue); } /** * Utility function, called by the various xBy(), yBy(), etc. methods. This method is * just like animateProperty(), except the value is an offset from the property's * current value, instead of an absolute "to" value. * * @param constantName The specifier for the property being animated * @param byValue The amount by which the property will change */ private void animatePropertyBy(int constantName, float byValue) { float fromValue = getValue(constantName); animatePropertyBy(constantName, fromValue, byValue); } /** * Utility function, called by animateProperty() and animatePropertyBy(), which handles the * details of adding a pending animation and posting the request to start the animation. * * @param constantName The specifier for the property being animated * @param startValue The starting value of the property * @param byValue The amount by which the property will change */ private void animatePropertyBy(int constantName, float startValue, float byValue) { // First, cancel any existing animations on this property if (mAnimatorMap.size() > 0) { Animator animatorToCancel = null; Set animatorSet = mAnimatorMap.keySet(); for (Animator runningAnim : animatorSet) { PropertyBundle bundle = mAnimatorMap.get(runningAnim); if (bundle.cancel(constantName)) { // property was canceled - cancel the animation if it's now empty // Note that it's safe to break out here because every new animation // on a property will cancel a previous animation on that property, so // there can only ever be one such animation running. if (bundle.mPropertyMask == NONE) { // the animation is no longer changing anything - cancel it animatorToCancel = runningAnim; break; } } } if (animatorToCancel != null) { animatorToCancel.cancel(); } } NameValuesHolder nameValuePair = new NameValuesHolder(constantName, startValue, byValue); mPendingAnimations.add(nameValuePair); mView.removeCallbacks(mAnimationStarter); mView.postOnAnimation(mAnimationStarter); } /** * This method handles setting the property values directly in the View object's fields. * propertyConstant tells it which property should be set, value is the value to set * the property to. * * @param propertyConstant The property to be set * @param value The value to set the property to */ private void setValue(int propertyConstant, float value) { final View.TransformationInfo info = mView.mTransformationInfo; final RenderNode renderNode = mView.mRenderNode; switch (propertyConstant) { case TRANSLATION_X: renderNode.setTranslationX(value); break; case TRANSLATION_Y: renderNode.setTranslationY(value); break; case TRANSLATION_Z: renderNode.setTranslationZ(value); break; case ROTATION: renderNode.setRotation(value); break; case ROTATION_X: renderNode.setRotationX(value); break; case ROTATION_Y: renderNode.setRotationY(value); break; case SCALE_X: renderNode.setScaleX(value); break; case SCALE_Y: renderNode.setScaleY(value); break; case X: renderNode.setTranslationX(value - mView.mLeft); break; case Y: renderNode.setTranslationY(value - mView.mTop); break; case Z: renderNode.setTranslationZ(value - renderNode.getElevation()); break; case ALPHA: info.mAlpha = value; renderNode.setAlpha(value); break; } } /** * This method gets the value of the named property from the View object. * * @param propertyConstant The property whose value should be returned * @return float The value of the named property */ private float getValue(int propertyConstant) { final RenderNode node = mView.mRenderNode; switch (propertyConstant) { case TRANSLATION_X: return node.getTranslationX(); case TRANSLATION_Y: return node.getTranslationY(); case TRANSLATION_Z: return node.getTranslationZ(); case ROTATION: return node.getRotation(); case ROTATION_X: return node.getRotationX(); case ROTATION_Y: return node.getRotationY(); case SCALE_X: return node.getScaleX(); case SCALE_Y: return node.getScaleY(); case X: return mView.mLeft + node.getTranslationX(); case Y: return mView.mTop + node.getTranslationY(); case Z: return node.getElevation() + node.getTranslationZ(); case ALPHA: return mView.mTransformationInfo.mAlpha; } return 0; } /** * Utility class that handles the various Animator events. The only ones we care * about are the end event (which we use to clean up the animator map when an animator * finishes) and the update event (which we use to calculate the current value of each * property and then set it on the view object). */ private class AnimatorEventListener implements Animator.AnimatorListener, ValueAnimator.AnimatorUpdateListener { @Override public void onAnimationStart(Animator animation) { if (mAnimatorSetupMap != null) { Runnable r = mAnimatorSetupMap.get(animation); if (r != null) { r.run(); } mAnimatorSetupMap.remove(animation); } if (mAnimatorOnStartMap != null) { Runnable r = mAnimatorOnStartMap.get(animation); if (r != null) { r.run(); } mAnimatorOnStartMap.remove(animation); } if (mListener != null) { mListener.onAnimationStart(animation); } } @Override public void onAnimationCancel(Animator animation) { if (mListener != null) { mListener.onAnimationCancel(animation); } if (mAnimatorOnEndMap != null) { mAnimatorOnEndMap.remove(animation); } } @Override public void onAnimationRepeat(Animator animation) { if (mListener != null) { mListener.onAnimationRepeat(animation); } } @Override public void onAnimationEnd(Animator animation) { mView.setHasTransientState(false); if (mAnimatorCleanupMap != null) { Runnable r = mAnimatorCleanupMap.get(animation); if (r != null) { r.run(); } mAnimatorCleanupMap.remove(animation); } if (mListener != null) { mListener.onAnimationEnd(animation); } if (mAnimatorOnEndMap != null) { Runnable r = mAnimatorOnEndMap.get(animation); if (r != null) { r.run(); } mAnimatorOnEndMap.remove(animation); } mAnimatorMap.remove(animation); } /** * Calculate the current value for each property and set it on the view. Invalidate * the view object appropriately, depending on which properties are being animated. * * @param animation The animator associated with the properties that need to be * set. This animator holds the animation fraction which we will use to calculate * the current value of each property. */ @Override public void onAnimationUpdate(ValueAnimator animation) { PropertyBundle propertyBundle = mAnimatorMap.get(animation); if (propertyBundle == null) { // Shouldn't happen, but just to play it safe return; } boolean hardwareAccelerated = mView.isHardwareAccelerated(); // alpha requires slightly different treatment than the other (transform) properties. // The logic in setAlpha() is not simply setting mAlpha, plus the invalidation // logic is dependent on how the view handles an internal call to onSetAlpha(). // We track what kinds of properties are set, and how alpha is handled when it is // set, and perform the invalidation steps appropriately. boolean alphaHandled = false; if (!hardwareAccelerated) { mView.invalidateParentCaches(); } float fraction = animation.getAnimatedFraction(); int propertyMask = propertyBundle.mPropertyMask; if ((propertyMask & TRANSFORM_MASK) != 0) { mView.invalidateViewProperty(hardwareAccelerated, false); } ArrayList valueList = propertyBundle.mNameValuesHolder; if (valueList != null) { int count = valueList.size(); for (int i = 0; i < count; ++i) { NameValuesHolder values = valueList.get(i); float value = values.mFromValue + fraction * values.mDeltaValue; if (values.mNameConstant == ALPHA) { alphaHandled = mView.setAlphaNoInvalidation(value); } else { setValue(values.mNameConstant, value); } } } if ((propertyMask & TRANSFORM_MASK) != 0) { if (!hardwareAccelerated) { mView.mPrivateFlags |= View.PFLAG_DRAWN; // force another invalidation } } // invalidate(false) in all cases except if alphaHandled gets set to true // via the call to setAlphaNoInvalidation(), above if (alphaHandled) { mView.invalidate(true); } else { mView.invalidateViewProperty(false, false); } if (mUpdateListener != null) { mUpdateListener.onAnimationUpdate(animation); } } } }