/*
 * Copyright (C) 2008 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.android.server.wifi.p2p;

import android.net.wifi.p2p.WifiP2pConfig;
import android.net.wifi.p2p.WifiP2pGroup;
import android.net.wifi.p2p.WifiP2pGroupList;
import android.net.wifi.p2p.nsd.WifiP2pServiceInfo;

/**
 * Native calls for bring up/shut down of the supplicant daemon and for
 * sending requests to the supplicant daemon
 *
 * {@hide}
 */
public class WifiP2pNative {
    private final String mTAG;
    private final String mInterfaceName;
    private final SupplicantP2pIfaceHal mSupplicantP2pIfaceHal;

    public WifiP2pNative(String interfaceName, SupplicantP2pIfaceHal p2pIfaceHal) {
        mTAG = "WifiP2pNative-" + interfaceName;
        mInterfaceName = interfaceName;
        mSupplicantP2pIfaceHal = p2pIfaceHal;
    }

    public String getInterfaceName() {
        return mInterfaceName;
    }

    /**
     * Enable verbose logging for all sub modules.
     */
    public void enableVerboseLogging(int verbose) {
    }

    /********************************************************
     * Supplicant operations
     ********************************************************/
    /**
     * This method is called repeatedly until the connection to wpa_supplicant is established.
     *
     * @return true if connection is established, false otherwise.
     * TODO: Add unit tests for these once we remove the legacy code.
     */
    public boolean connectToSupplicant() {
        // Start initialization if not already started.
        if (!mSupplicantP2pIfaceHal.isInitializationStarted()
                && !mSupplicantP2pIfaceHal.initialize()) {
            return false;
        }
        // Check if the initialization is complete.
        return mSupplicantP2pIfaceHal.isInitializationComplete();
    }

    /**
     * Close supplicant connection.
     */
    public void closeSupplicantConnection() {
        // Nothing to do for HIDL.
    }

    /**
     * Set WPS device name.
     *
     * @param name String to be set.
     * @return true if request is sent successfully, false otherwise.
     */
    public boolean setDeviceName(String name) {
        return mSupplicantP2pIfaceHal.setWpsDeviceName(name);
    }

    /**
     * Populate list of available networks or update existing list.
     *
     * @return true, if list has been modified.
     */
    public boolean p2pListNetworks(WifiP2pGroupList groups) {
        return mSupplicantP2pIfaceHal.loadGroups(groups);
    }

    /**
     * Initiate WPS Push Button setup.
     * The PBC operation requires that a button is also pressed at the
     * AP/Registrar at about the same time (2 minute window).
     *
     * @param iface Group interface name to use.
     * @param bssid BSSID of the AP. Use zero'ed bssid to indicate wildcard.
     * @return true, if operation was successful.
     */
    public boolean startWpsPbc(String iface, String bssid) {
        return mSupplicantP2pIfaceHal.startWpsPbc(iface, bssid);
    }

    /**
     * Initiate WPS Pin Keypad setup.
     *
     * @param iface Group interface name to use.
     * @param pin 8 digit pin to be used.
     * @return true, if operation was successful.
     */
    public boolean startWpsPinKeypad(String iface, String pin) {
        return mSupplicantP2pIfaceHal.startWpsPinKeypad(iface, pin);
    }

    /**
     * Initiate WPS Pin Display setup.
     *
     * @param iface Group interface name to use.
     * @param bssid BSSID of the AP. Use zero'ed bssid to indicate wildcard.
     * @return generated pin if operation was successful, null otherwise.
     */
    public String startWpsPinDisplay(String iface, String bssid) {
        return mSupplicantP2pIfaceHal.startWpsPinDisplay(iface, bssid);
    }

    /**
     * Remove network with provided id.
     *
     * @param netId Id of the network to lookup.
     * @return true, if operation was successful.
     */
    public boolean removeP2pNetwork(int netId) {
        return mSupplicantP2pIfaceHal.removeNetwork(netId);
    }

    /**
     * Set WPS device name.
     *
     * @param name String to be set.
     * @return true if request is sent successfully, false otherwise.
     */
    public boolean setP2pDeviceName(String name) {
        return mSupplicantP2pIfaceHal.setWpsDeviceName(name);
    }

    /**
     * Set WPS device type.
     *
     * @param type Type specified as a string. Used format: <categ>-<OUI>-<subcateg>
     * @return true if request is sent successfully, false otherwise.
     */
    public boolean setP2pDeviceType(String type) {
        return mSupplicantP2pIfaceHal.setWpsDeviceType(type);
    }

    /**
     * Set WPS config methods
     *
     * @param cfg List of config methods.
     * @return true if request is sent successfully, false otherwise.
     */
    public boolean setConfigMethods(String cfg) {
        return mSupplicantP2pIfaceHal.setWpsConfigMethods(cfg);
    }

    /**
     * Set the postfix to be used for P2P SSID's.
     *
     * @param postfix String to be appended to SSID.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean setP2pSsidPostfix(String postfix) {
        return mSupplicantP2pIfaceHal.setSsidPostfix(postfix);
    }

    /**
     * Set the Maximum idle time in seconds for P2P groups.
     * This value controls how long a P2P group is maintained after there
     * is no other members in the group. As a group owner, this means no
     * associated stations in the group. As a P2P client, this means no
     * group owner seen in scan results.
     *
     * @param iface Group interface name to use.
     * @param time Timeout value in seconds.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean setP2pGroupIdle(String iface, int time) {
        return mSupplicantP2pIfaceHal.setGroupIdle(iface, time);
    }

    /**
     * Turn on/off power save mode for the interface.
     *
     * @param iface Group interface name to use.
     * @param enabled Indicate if power save is to be turned on/off.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean setP2pPowerSave(String iface, boolean enabled) {
        return mSupplicantP2pIfaceHal.setPowerSave(iface, enabled);
    }

    /**
     * Enable/Disable Wifi Display.
     *
     * @param enable true to enable, false to disable.
     * @return true, if operation was successful.
     */
    public boolean setWfdEnable(boolean enable) {
        return mSupplicantP2pIfaceHal.enableWfd(enable);
    }

    /**
     * Set Wifi Display device info.
     *
     * @param hex WFD device info as described in section 5.1.2 of WFD technical
     *        specification v1.0.0.
     * @return true, if operation was successful.
     */
    public boolean setWfdDeviceInfo(String hex) {
        return mSupplicantP2pIfaceHal.setWfdDeviceInfo(hex);
    }

    /**
     * Initiate a P2P service discovery indefinitely.
     * Will trigger {@link WifiP2pMonitor#P2P_DEVICE_FOUND_EVENT} on finding devices.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pFind() {
        return p2pFind(0);
    }

    /**
     * Initiate a P2P service discovery with a (optional) timeout.
     *
     * @param timeout Max time to be spent is peforming discovery.
     *        Set to 0 to indefinely continue discovery untill and explicit
     *        |stopFind| is sent.
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pFind(int timeout) {
        return mSupplicantP2pIfaceHal.find(timeout);
    }

    /**
     * Stop an ongoing P2P service discovery.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pStopFind() {
        return mSupplicantP2pIfaceHal.stopFind();
    }

    /**
     * Configure Extended Listen Timing.
     *
     * If enabled, listen state must be entered every |intervalInMillis| for at
     * least |periodInMillis|. Both values have acceptable range of 1-65535
     * (with interval obviously having to be larger than or equal to duration).
     * If the P2P module is not idle at the time the Extended Listen Timing
     * timeout occurs, the Listen State operation must be skipped.
     *
     * @param enable Enables or disables listening.
     * @param period Period in milliseconds.
     * @param interval Interval in milliseconds.
     *
     * @return true, if operation was successful.
     */
    public boolean p2pExtListen(boolean enable, int period, int interval) {
        return mSupplicantP2pIfaceHal.configureExtListen(enable, period, interval);
    }

    /**
     * Set P2P Listen channel.
     *
     * When specifying a social channel on the 2.4 GHz band (1/6/11) there is no
     * need to specify the operating class since it defaults to 81. When
     * specifying a social channel on the 60 GHz band (2), specify the 60 GHz
     * operating class (180).
     *
     * @param lc Wifi channel. eg, 1, 6, 11.
     * @param oc Operating Class indicates the channel set of the AP
     *        indicated by this BSSID
     *
     * @return true, if operation was successful.
     */
    public boolean p2pSetChannel(int lc, int oc) {
        return mSupplicantP2pIfaceHal.setListenChannel(lc, oc);
    }

    /**
     * Flush P2P peer table and state.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pFlush() {
        return mSupplicantP2pIfaceHal.flush();
    }

    /**
     * Start P2P group formation with a discovered P2P peer. This includes
     * optional group owner negotiation, group interface setup, provisioning,
     * and establishing data connection.
     *
     * @param config Configuration to use to connect to remote device.
     * @param joinExistingGroup Indicates that this is a command to join an
     *        existing group as a client. It skips the group owner negotiation
     *        part. This must send a Provision Discovery Request message to the
     *        target group owner before associating for WPS provisioning.
     *
     * @return String containing generated pin, if selected provision method
     *        uses PIN.
     */
    public String p2pConnect(WifiP2pConfig config, boolean joinExistingGroup) {
        return mSupplicantP2pIfaceHal.connect(config, joinExistingGroup);
    }

    /**
     * Cancel an ongoing P2P group formation and joining-a-group related
     * operation. This operation unauthorizes the specific peer device (if any
     * had been authorized to start group formation), stops P2P find (if in
     * progress), stops pending operations for join-a-group, and removes the
     * P2P group interface (if one was used) that is in the WPS provisioning
     * step. If the WPS provisioning step has been completed, the group is not
     * terminated.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pCancelConnect() {
        return mSupplicantP2pIfaceHal.cancelConnect();
    }

    /**
     * Send P2P provision discovery request to the specified peer. The
     * parameters for this command are the P2P device address of the peer and the
     * desired configuration method.
     *
     * @param config Config class describing peer setup.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pProvisionDiscovery(WifiP2pConfig config) {
        return mSupplicantP2pIfaceHal.provisionDiscovery(config);
    }

    /**
     * Set up a P2P group owner manually.
     * This is a helper method that invokes groupAdd(networkId, isPersistent) internally.
     *
     * @param persistent Used to request a persistent group to be formed.
     *
     * @return true, if operation was successful.
     */
    public boolean p2pGroupAdd(boolean persistent) {
        return mSupplicantP2pIfaceHal.groupAdd(persistent);
    }

    /**
     * Set up a P2P group owner manually (i.e., without group owner
     * negotiation with a specific peer). This is also known as autonomous
     * group owner.
     *
     * @param netId Used to specify the restart of a persistent group.
     *
     * @return true, if operation was successful.
     */
    public boolean p2pGroupAdd(int netId) {
        return mSupplicantP2pIfaceHal.groupAdd(netId, true);
    }

    /**
     * Terminate a P2P group. If a new virtual network interface was used for
     * the group, it must also be removed. The network interface name of the
     * group interface is used as a parameter for this command.
     *
     * @param iface Group interface name to use.
     * @return true, if operation was successful.
     */
    public boolean p2pGroupRemove(String iface) {
        return mSupplicantP2pIfaceHal.groupRemove(iface);
    }

    /**
     * Reject connection attempt from a peer (specified with a device
     * address). This is a mechanism to reject a pending group owner negotiation
     * with a peer and request to automatically block any further connection or
     * discovery of the peer.
     *
     * @param deviceAddress MAC address of the device to reject.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pReject(String deviceAddress) {
        return mSupplicantP2pIfaceHal.reject(deviceAddress);
    }

    /**
     * Invite a device to a persistent group.
     * If the peer device is the group owner of the persistent group, the peer
     * parameter is not needed. Otherwise it is used to specify which
     * device to invite. |goDeviceAddress| parameter may be used to override
     * the group owner device address for Invitation Request should it not be
     * known for some reason (this should not be needed in most cases).
     *
     * @param group Group object to use.
     * @param deviceAddress MAC address of the device to invite.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pInvite(WifiP2pGroup group, String deviceAddress) {
        return mSupplicantP2pIfaceHal.invite(group, deviceAddress);
    }

    /**
     * Reinvoke a device from a persistent group.
     *
     * @param netId Used to specify the persistent group.
     * @param deviceAddress MAC address of the device to reinvoke.
     *
     * @return true, if operation was successful.
     */
    public boolean p2pReinvoke(int netId, String deviceAddress) {
        return mSupplicantP2pIfaceHal.reinvoke(netId, deviceAddress);
    }

    /**
     * Gets the operational SSID of the device.
     *
     * @param deviceAddress MAC address of the peer.
     *
     * @return SSID of the device.
     */
    public String p2pGetSsid(String deviceAddress) {
        return mSupplicantP2pIfaceHal.getSsid(deviceAddress);
    }

    /**
     * Gets the MAC address of the device.
     *
     * @return MAC address of the device.
     */
    public String p2pGetDeviceAddress() {
        return mSupplicantP2pIfaceHal.getDeviceAddress();
    }

    /**
     * Gets the capability of the group which the device is a
     * member of.
     *
     * @param deviceAddress MAC address of the peer.
     *
     * @return combination of |GroupCapabilityMask| values.
     */
    public int getGroupCapability(String deviceAddress) {
        return mSupplicantP2pIfaceHal.getGroupCapability(deviceAddress);
    }

    /**
     * This command can be used to add a upnp/bonjour service.
     *
     * @param servInfo List of service queries.
     *
     * @return true, if operation was successful.
     */
    public boolean p2pServiceAdd(WifiP2pServiceInfo servInfo) {
        return mSupplicantP2pIfaceHal.serviceAdd(servInfo);
    }

    /**
     * This command can be used to remove a upnp/bonjour service.
     *
     * @param servInfo List of service queries.
     *
     * @return true, if operation was successful.
     */
    public boolean p2pServiceDel(WifiP2pServiceInfo servInfo) {
        return mSupplicantP2pIfaceHal.serviceRemove(servInfo);
    }

    /**
     * This command can be used to flush all services from the
     * device.
     *
     * @return boolean value indicating whether operation was successful.
     */
    public boolean p2pServiceFlush() {
        return mSupplicantP2pIfaceHal.serviceFlush();
    }

    /**
     * Schedule a P2P service discovery request. The parameters for this command
     * are the device address of the peer device (or 00:00:00:00:00:00 for
     * wildcard query that is sent to every discovered P2P peer that supports
     * service discovery) and P2P Service Query TLV(s) as hexdump.
     *
     * @param addr MAC address of the device to discover.
     * @param query Hex dump of the query data.
     * @return identifier Identifier for the request. Can be used to cancel the
     *         request.
     */
    public String p2pServDiscReq(String addr, String query) {
        return mSupplicantP2pIfaceHal.requestServiceDiscovery(addr, query);
    }

    /**
     * Cancel a previous service discovery request.
     *
     * @param id Identifier for the request to cancel.
     * @return true, if operation was successful.
     */
    public boolean p2pServDiscCancelReq(String id) {
        return mSupplicantP2pIfaceHal.cancelServiceDiscovery(id);
    }

    /**
     * Send driver command to set Miracast mode.
     *
     * @param mode Mode of Miracast.
     *        0 = disabled
     *        1 = operating as source
     *        2 = operating as sink
     */
    public void setMiracastMode(int mode) {
        mSupplicantP2pIfaceHal.setMiracastMode(mode);
    }

    /**
     * Get NFC handover request message.
     *
     * @return select message if created successfully, null otherwise.
     */
    public String getNfcHandoverRequest() {
        return mSupplicantP2pIfaceHal.getNfcHandoverRequest();
    }

    /**
     * Get NFC handover select message.
     *
     * @return select message if created successfully, null otherwise.
     */
    public String getNfcHandoverSelect() {
        return mSupplicantP2pIfaceHal.getNfcHandoverSelect();
    }

    /**
     * Report NFC handover select message.
     *
     * @return true if reported successfully, false otherwise.
     */
    public boolean initiatorReportNfcHandover(String selectMessage) {
        return mSupplicantP2pIfaceHal.initiatorReportNfcHandover(selectMessage);
    }

    /**
     * Report NFC handover request message.
     *
     * @return true if reported successfully, false otherwise.
     */
    public boolean responderReportNfcHandover(String requestMessage) {
        return mSupplicantP2pIfaceHal.responderReportNfcHandover(requestMessage);
    }

    /**
     * Set the client list for the provided network.
     *
     * @param netId Id of the network.
     * @return  Space separated list of clients if successfull, null otherwise.
     */
    public String getP2pClientList(int netId) {
        return mSupplicantP2pIfaceHal.getClientList(netId);
    }

    /**
     * Set the client list for the provided network.
     *
     * @param netId Id of the network.
     * @param list Space separated list of clients.
     * @return true, if operation was successful.
     */
    public boolean setP2pClientList(int netId, String list) {
        return mSupplicantP2pIfaceHal.setClientList(netId, list);
    }

    /**
     * Save the current configuration to p2p_supplicant.conf.
     *
     * @return true on success, false otherwise.
     */
    public boolean saveConfig() {
        return mSupplicantP2pIfaceHal.saveConfig();
    }
}