1/*
2 * Copyright (C) 2004-2010 NXP Software
3 * Copyright (C) 2010 The Android Open Source Project
4 *
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at
8 *
9 *      http://www.apache.org/licenses/LICENSE-2.0
10 *
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
16 */
17
18/************************************************************************************/
19/*                                                                                  */
20/*  Includes                                                                        */
21/*                                                                                  */
22/************************************************************************************/
23
24#include "LVCS.h"
25#include "LVCS_Private.h"
26#include "LVCS_ReverbGenerator.h"
27#include "LVC_Mixer.h"
28#include "VectorArithmetic.h"
29#include "BIQUAD.h"
30#include "LVCS_Tables.h"
31
32/************************************************************************************/
33/*                                                                                  */
34/* FUNCTION:                LVCS_ReverbGeneratorInit                                */
35/*                                                                                  */
36/* DESCRIPTION:                                                                     */
37/*  Initialises the reverb module. The delay buffer size is configured for the      */
38/*  sample rate and the speaker type.                                               */
39/*                                                                                  */
40/*  The routine may also be called for re-initialisation, i.e. when one of the      */
41/*  control parameters has changed. In this case the delay and filters are only     */
42/*  re-initialised if one of the following two conditions is met:                   */
43/*      -   the sample rate has changed                                             */
44/*      -   the speaker type changes to/from the mobile speaker                     */
45/*                                                                                  */
46/*                                                                                  */
47/* PARAMETERS:                                                                      */
48/*  hInstance               Instance Handle                                         */
49/*  pParams                 Pointer to the inialisation parameters                  */
50/*                                                                                  */
51/* RETURNS:                                                                         */
52/*  LVCS_Success            Always succeeds                                         */
53/*                                                                                  */
54/* NOTES:                                                                           */
55/*  1.  In the delay settings 'Samples' is the number of samples to the end of the  */
56/*      buffer.                                                                     */
57/*  2.  The numerator coefficients of the filter are negated to cause an inversion. */
58/*                                                                                  */
59/************************************************************************************/
60
61LVCS_ReturnStatus_en LVCS_ReverbGeneratorInit(LVCS_Handle_t     hInstance,
62                                              LVCS_Params_t     *pParams)
63{
64
65    LVM_UINT16              Delay;
66    LVM_UINT16              Offset;
67    LVCS_Instance_t         *pInstance = (LVCS_Instance_t  *)hInstance;
68    LVCS_ReverbGenerator_t  *pConfig   = (LVCS_ReverbGenerator_t *)&pInstance->Reverberation;
69    LVCS_Data_t             *pData     = (LVCS_Data_t *)pInstance->MemoryTable.Region[LVCS_MEMREGION_PERSISTENT_FAST_DATA].pBaseAddress;
70    LVCS_Coefficient_t      *pCoefficients = (LVCS_Coefficient_t *)pInstance->MemoryTable.Region[LVCS_MEMREGION_PERSISTENT_FAST_COEF].pBaseAddress;
71    BQ_C16_Coefs_t          Coeffs;
72    const BiquadA012B12CoefsSP_t  *pReverbCoefTable;
73
74    /*
75     * Initialise the delay and filters if:
76     *  - the sample rate has changed
77     *  - the speaker type has changed to or from the mobile speaker
78     */
79    if(pInstance->Params.SampleRate != pParams->SampleRate )      /* Sample rate change test */
80
81    {
82        /*
83         * Setup the delay
84         */
85        Delay = (LVM_UINT16)LVCS_StereoDelayCS[(LVM_UINT16)pParams->SampleRate];
86
87
88        pConfig->DelaySize      = (LVM_INT16)(2 * Delay);
89        pConfig->DelayOffset    = 0;
90        LoadConst_16(0,                                                                 /* Value */
91                     (LVM_INT16 *)&pConfig->StereoSamples[0],                           /* Destination */
92                     (LVM_UINT16)(sizeof(pConfig->StereoSamples)/sizeof(LVM_INT16)));   /* Number of words */
93
94        /*
95         * Setup the filters
96         */
97        Offset = (LVM_UINT16)pParams->SampleRate;
98        pReverbCoefTable = (BiquadA012B12CoefsSP_t*)&LVCS_ReverbCoefTable[0];
99
100        /* Convert incoming coefficients to the required format/ordering */
101        Coeffs.A0 = (LVM_INT16)pReverbCoefTable[Offset].A0;
102        Coeffs.A1 = (LVM_INT16)pReverbCoefTable[Offset].A1;
103        Coeffs.A2 = (LVM_INT16)pReverbCoefTable[Offset].A2;
104        Coeffs.B1 = (LVM_INT16)-pReverbCoefTable[Offset].B1;
105        Coeffs.B2 = (LVM_INT16)-pReverbCoefTable[Offset].B2;
106
107        LoadConst_16(0,                                                                 /* Value */
108                     (void *)&pData->ReverbBiquadTaps,                             /* Destination Cast to void: no dereferencing in function*/
109                     (LVM_UINT16)(sizeof(pData->ReverbBiquadTaps)/sizeof(LVM_INT16)));  /* Number of words */
110
111        BQ_2I_D16F16Css_TRC_WRA_01_Init(&pCoefficients->ReverbBiquadInstance,
112                                        &pData->ReverbBiquadTaps,
113                                        &Coeffs);
114
115        /* Callbacks */
116        switch(pReverbCoefTable[Offset].Scale)
117        {
118            case 14:
119                pConfig->pBiquadCallBack  = BQ_2I_D16F16C14_TRC_WRA_01;
120                break;
121            case 15:
122                pConfig->pBiquadCallBack  = BQ_2I_D16F16C15_TRC_WRA_01;
123                break;
124        }
125
126
127        /*
128         * Setup the mixer
129         */
130        pConfig->ProcGain = (LVM_UINT16)(HEADPHONEGAINPROC);
131        pConfig->UnprocGain  = (LVM_UINT16)(HEADPHONEGAINUNPROC);
132    }
133
134    if(pInstance->Params.ReverbLevel != pParams->ReverbLevel)
135    {
136        LVM_INT32   ReverbPercentage=83886;                     // 1 Percent Reverb i.e 1/100 in Q 23 format
137        ReverbPercentage*=pParams->ReverbLevel;                 // Actual Reverb Level in Q 23 format
138        pConfig->ReverbLevel=(LVM_INT16)(ReverbPercentage>>8);  // Reverb Level in Q 15 format
139    }
140
141    return(LVCS_SUCCESS);
142}
143
144/************************************************************************************/
145/*                                                                                  */
146/* FUNCTION:                LVCS_Reverb                                             */
147/*                                                                                  */
148/* DESCRIPTION:                                                                     */
149/*  Create reverb using the block of input samples based on the following block     */
150/*  diagram:                                                                        */
151/*                           ________              ________                         */
152/*                          |        |            |        |                        */
153/*     _____     _______    |        |----------->|        |    ______     ___      */
154/*    |     |   |       |   | Stereo |            | L & R  |   |      |   |   |     */
155/* -->| LPF |-->| Delay |-->|   to   |    ____    |   to   |-->| Gain |-->| + |-->  */
156/*  | |_____|   |_______|   | L & R  |   |    |   | Stereo |   |______|   |___|     */
157/*  |                       |        |-->| -1 |-->|        |                |       */
158/*  |                       |________|   |____|   |________|                |       */
159/*  |                                                                       |       */
160/*  |-----------------------------------------------------------------------|       */
161/*                                                                                  */
162/*  The input buffer is broken in to sub-blocks of the size of the delay or less.   */
163/*  This allows the delay buffer to be treated as a circular buffer but processed   */
164/*  as a linear buffer.                                                             */
165/*                                                                                  */
166/*                                                                                  */
167/* PARAMETERS:                                                                      */
168/*  hInstance               Instance Handle                                         */
169/*  pInData                 Pointer to the input buffer                             */
170/*  pOutData                Pointer to the output buffer                            */
171/*  NumSamples              Number of samples to process                            */
172/*                                                                                  */
173/* RETURNS:                                                                         */
174/*  LVCS_Success            Always succeeds                                         */
175/*                                                                                  */
176/* NOTES:                                                                           */
177/*  1.  Process in blocks of samples the size of the delay where possible, if not   */
178/*      the number of samples left over                                             */
179/*  2.  The Gain is combined with the LPF and incorporated in to the coefficients   */
180/*                                                                                  */
181/************************************************************************************/
182
183LVCS_ReturnStatus_en LVCS_ReverbGenerator(LVCS_Handle_t         hInstance,
184                                          const LVM_INT16       *pInData,
185                                          LVM_INT16             *pOutData,
186                                          LVM_UINT16            NumSamples)
187{
188
189    LVCS_Instance_t         *pInstance = (LVCS_Instance_t  *)hInstance;
190    LVCS_ReverbGenerator_t  *pConfig   = (LVCS_ReverbGenerator_t *)&pInstance->Reverberation;
191    LVCS_Coefficient_t      *pCoefficients = (LVCS_Coefficient_t *)pInstance->MemoryTable.Region[LVCS_MEMREGION_PERSISTENT_FAST_COEF].pBaseAddress;
192    LVM_INT16               *pScratch  = (LVM_INT16 *)pInstance->MemoryTable.Region[LVCS_MEMREGION_TEMPORARY_FAST].pBaseAddress;
193
194
195    /*
196     * Copy the data to the output in outplace processing
197     */
198    if (pInData != pOutData)
199    {
200        /*
201         * Reverb not required so just copy the data
202         */
203        Copy_16((LVM_INT16 *)pInData,                                       /* Source */
204                (LVM_INT16 *)pOutData,                                      /* Destination */
205                (LVM_INT16)(2*NumSamples));                                 /* Left and right */
206    }
207
208
209    /*
210     * Check if the reverb is required
211     */
212    if (((pInstance->Params.SpeakerType == LVCS_HEADPHONE) ||           /* Disable when CS4MS in stereo mode */
213         (pInstance->Params.SpeakerType == LVCS_EX_HEADPHONES) ||
214         (pInstance->Params.SourceFormat != LVCS_STEREO))  &&
215        ((pInstance->Params.OperatingMode & LVCS_REVERBSWITCH) !=0))    /* For validation testing */
216    {
217        /********************************************************************************/
218        /*                                                                              */
219        /* Copy the input data to scratch memory and filter it                          */
220        /*                                                                              */
221        /********************************************************************************/
222
223        /*
224         * Copy the input data to the scratch memory
225         */
226        Copy_16((LVM_INT16 *)pInData,                                     /* Source */
227                (LVM_INT16 *)pScratch,                                    /* Destination */
228                (LVM_INT16)(2*NumSamples));                               /* Left and right */
229
230
231        /*
232         * Filter the data
233         */
234        (pConfig->pBiquadCallBack)((Biquad_Instance_t*)&pCoefficients->ReverbBiquadInstance,
235                                   (LVM_INT16 *)pScratch,
236                                   (LVM_INT16 *)pScratch,
237                                   (LVM_INT16)NumSamples);
238
239        Mult3s_16x16( (LVM_INT16 *)pScratch,
240                      pConfig->ReverbLevel,
241                      (LVM_INT16 *)pScratch,
242                      (LVM_INT16)(2*NumSamples));
243
244
245        /*
246         * Apply the delay mix
247         */
248        DelayMix_16x16((LVM_INT16 *)pScratch,
249                       &pConfig->StereoSamples[0],
250                       pConfig->DelaySize,
251                       pOutData,
252                       &pConfig->DelayOffset,
253                       (LVM_INT16)NumSamples);
254
255
256    }
257
258    return(LVCS_SUCCESS);
259}
260
261
262
263
264
265