1/* 2 * include/linux/tipc_config.h: Include file for TIPC configuration interface 3 * 4 * Copyright (c) 2003-2006, Ericsson AB 5 * Copyright (c) 2005-2007, 2010-2011, Wind River Systems 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the names of the copyright holders nor the names of its 17 * contributors may be used to endorse or promote products derived from 18 * this software without specific prior written permission. 19 * 20 * Alternatively, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") version 2 as published by the Free 22 * Software Foundation. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 34 * POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37#ifndef _LINUX_TIPC_CONFIG_H_ 38#define _LINUX_TIPC_CONFIG_H_ 39 40#include <linux/types.h> 41#include <linux/string.h> 42#include <asm/byteorder.h> 43 44#include <arpa/inet.h> /* for ntohs etc. */ 45 46/* 47 * Configuration 48 * 49 * All configuration management messaging involves sending a request message 50 * to the TIPC configuration service on a node, which sends a reply message 51 * back. (In the future multi-message replies may be supported.) 52 * 53 * Both request and reply messages consist of a transport header and payload. 54 * The transport header contains info about the desired operation; 55 * the payload consists of zero or more type/length/value (TLV) items 56 * which specify parameters or results for the operation. 57 * 58 * For many operations, the request and reply messages have a fixed number 59 * of TLVs (usually zero or one); however, some reply messages may return 60 * a variable number of TLVs. A failed request is denoted by the presence 61 * of an "error string" TLV in the reply message instead of the TLV(s) the 62 * reply should contain if the request succeeds. 63 */ 64 65/* 66 * Public commands: 67 * May be issued by any process. 68 * Accepted by own node, or by remote node only if remote management enabled. 69 */ 70 71#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ 72#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ 73#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ 74#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ 75#define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ 76#define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ 77#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ 78#define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ 79#define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */ 80 81/* 82 * Protected commands: 83 * May only be issued by "network administration capable" process. 84 * Accepted by own node, or by remote node only if remote management enabled 85 * and this node is zone manager. 86 */ 87 88#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ 89#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ 90#define TIPC_CMD_GET_MAX_PUBL 0x4005 /* tx none, rx unsigned */ 91#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* tx none, rx unsigned */ 92#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ 93#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */ 94#define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */ 95#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ 96#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ 97 98#define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ 99#define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ 100#define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ 101#define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ 102#define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ 103#define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */ 104#define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */ 105#define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ 106 107/* 108 * Private commands: 109 * May only be issued by "network administration capable" process. 110 * Accepted by own node only; cannot be used on a remote node. 111 */ 112 113#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ 114#define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ 115#define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ 116#define TIPC_CMD_SET_MAX_PUBL 0x8005 /* tx unsigned, rx none */ 117#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* tx unsigned, rx none */ 118#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ 119#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */ 120#define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */ 121#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ 122#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ 123 124/* 125 * Reserved commands: 126 * May not be issued by any process. 127 * Used internally by TIPC. 128 */ 129 130#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ 131 132/* 133 * TLV types defined for TIPC 134 */ 135 136#define TIPC_TLV_NONE 0 /* no TLV present */ 137#define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ 138#define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ 139#define TIPC_TLV_STRING 3 /* char[128] (max) */ 140#define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ 141#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ 142 143#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ 144#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ 145#define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ 146#define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ 147#define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ 148#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ 149#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ 150#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ 151#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ 152#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ 153#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ 154 155/* 156 * Maximum sizes of TIPC bearer-related names (including terminating NUL) 157 */ 158 159#define TIPC_MAX_MEDIA_NAME 16 /* format = media */ 160#define TIPC_MAX_IF_NAME 16 /* format = interface */ 161#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */ 162#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */ 163 164/* 165 * Link priority limits (min, default, max, media default) 166 */ 167 168#define TIPC_MIN_LINK_PRI 0 169#define TIPC_DEF_LINK_PRI 10 170#define TIPC_MAX_LINK_PRI 31 171#define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) 172 173/* 174 * Link tolerance limits (min, default, max), in ms 175 */ 176 177#define TIPC_MIN_LINK_TOL 50 178#define TIPC_DEF_LINK_TOL 1500 179#define TIPC_MAX_LINK_TOL 30000 180 181#if (TIPC_MIN_LINK_TOL < 16) 182#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)" 183#endif 184 185/* 186 * Link window limits (min, default, max), in packets 187 */ 188 189#define TIPC_MIN_LINK_WIN 16 190#define TIPC_DEF_LINK_WIN 50 191#define TIPC_MAX_LINK_WIN 150 192 193 194struct tipc_node_info { 195 __be32 addr; /* network address of node */ 196 __be32 up; /* 0=down, 1= up */ 197}; 198 199struct tipc_link_info { 200 __be32 dest; /* network address of peer node */ 201 __be32 up; /* 0=down, 1=up */ 202 char str[TIPC_MAX_LINK_NAME]; /* link name */ 203}; 204 205struct tipc_bearer_config { 206 __be32 priority; /* Range [1,31]. Override per link */ 207 __be32 disc_domain; /* <Z.C.N> describing desired nodes */ 208 char name[TIPC_MAX_BEARER_NAME]; 209}; 210 211struct tipc_link_config { 212 __be32 value; 213 char name[TIPC_MAX_LINK_NAME]; 214}; 215 216#define TIPC_NTQ_ALLTYPES 0x80000000 217 218struct tipc_name_table_query { 219 __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ 220 __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ 221 __be32 lowbound; /* (i.e. displays all entries of name table) */ 222 __be32 upbound; 223}; 224 225/* 226 * The error string TLV is a null-terminated string describing the cause 227 * of the request failure. To simplify error processing (and to save space) 228 * the first character of the string can be a special error code character 229 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. 230 */ 231 232#define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ 233#define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ 234#define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ 235#define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ 236#define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ 237#define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ 238 239/* 240 * A TLV consists of a descriptor, followed by the TLV value. 241 * TLV descriptor fields are stored in network byte order; 242 * TLV values must also be stored in network byte order (where applicable). 243 * TLV descriptors must be aligned to addresses which are multiple of 4, 244 * so up to 3 bytes of padding may exist at the end of the TLV value area. 245 * There must not be any padding between the TLV descriptor and its value. 246 */ 247 248struct tlv_desc { 249 __be16 tlv_len; /* TLV length (descriptor + value) */ 250 __be16 tlv_type; /* TLV identifier */ 251}; 252 253#define TLV_ALIGNTO 4 254 255#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) 256#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) 257#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) 258#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) 259 260static __inline__ int TLV_OK(const void *tlv, __u16 space) 261{ 262 /* 263 * Would also like to check that "tlv" is a multiple of 4, 264 * but don't know how to do this in a portable way. 265 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler 266 * won't allow binary "&" with a pointer. 267 * - Tried casting "tlv" to integer type, but causes warning about size 268 * mismatch when pointer is bigger than chosen type (int, long, ...). 269 */ 270 271 return (space >= TLV_SPACE(0)) && 272 (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); 273} 274 275static __inline__ int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) 276{ 277 return TLV_OK(tlv, space) && 278 (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); 279} 280 281static __inline__ int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) 282{ 283 struct tlv_desc *tlv_ptr; 284 int tlv_len; 285 286 tlv_len = TLV_LENGTH(len); 287 tlv_ptr = (struct tlv_desc *)tlv; 288 tlv_ptr->tlv_type = htons(type); 289 tlv_ptr->tlv_len = htons(tlv_len); 290 if (len && data) 291 memcpy(TLV_DATA(tlv_ptr), data, tlv_len); 292 return TLV_SPACE(len); 293} 294 295/* 296 * A TLV list descriptor simplifies processing of messages 297 * containing multiple TLVs. 298 */ 299 300struct tlv_list_desc { 301 struct tlv_desc *tlv_ptr; /* ptr to current TLV */ 302 __u32 tlv_space; /* # bytes from curr TLV to list end */ 303}; 304 305static __inline__ void TLV_LIST_INIT(struct tlv_list_desc *list, 306 void *data, __u32 space) 307{ 308 list->tlv_ptr = (struct tlv_desc *)data; 309 list->tlv_space = space; 310} 311 312static __inline__ int TLV_LIST_EMPTY(struct tlv_list_desc *list) 313{ 314 return (list->tlv_space == 0); 315} 316 317static __inline__ int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) 318{ 319 return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); 320} 321 322static __inline__ void *TLV_LIST_DATA(struct tlv_list_desc *list) 323{ 324 return TLV_DATA(list->tlv_ptr); 325} 326 327static __inline__ void TLV_LIST_STEP(struct tlv_list_desc *list) 328{ 329 __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); 330 331 list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); 332 list->tlv_space -= tlv_space; 333} 334 335/* 336 * Configuration messages exchanged via NETLINK_GENERIC use the following 337 * family id, name, version and command. 338 */ 339#define TIPC_GENL_NAME "TIPC" 340#define TIPC_GENL_VERSION 0x1 341#define TIPC_GENL_CMD 0x1 342 343/* 344 * TIPC specific header used in NETLINK_GENERIC requests. 345 */ 346struct tipc_genlmsghdr { 347 __u32 dest; /* Destination address */ 348 __u16 cmd; /* Command */ 349 __u16 reserved; /* Unused */ 350}; 351 352#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) 353 354/* 355 * Configuration messages exchanged via TIPC sockets use the TIPC configuration 356 * message header, which is defined below. This structure is analogous 357 * to the Netlink message header, but fields are stored in network byte order 358 * and no padding is permitted between the header and the message data 359 * that follows. 360 */ 361 362struct tipc_cfg_msg_hdr { 363 __be32 tcm_len; /* Message length (including header) */ 364 __be16 tcm_type; /* Command type */ 365 __be16 tcm_flags; /* Additional flags */ 366 char tcm_reserved[8]; /* Unused */ 367}; 368 369#define TCM_F_REQUEST 0x1 /* Flag: Request message */ 370#define TCM_F_MORE 0x2 /* Flag: Message to be continued */ 371 372#define TCM_ALIGN(datalen) (((datalen)+3) & ~3) 373#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) 374#define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) 375#define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) 376 377static __inline__ int TCM_SET(void *msg, __u16 cmd, __u16 flags, 378 void *data, __u16 data_len) 379{ 380 struct tipc_cfg_msg_hdr *tcm_hdr; 381 int msg_len; 382 383 msg_len = TCM_LENGTH(data_len); 384 tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; 385 tcm_hdr->tcm_len = htonl(msg_len); 386 tcm_hdr->tcm_type = htons(cmd); 387 tcm_hdr->tcm_flags = htons(flags); 388 if (data_len && data) 389 memcpy(TCM_DATA(msg), data, data_len); 390 return TCM_SPACE(data_len); 391} 392 393#endif 394