X86InstrInfo.h revision 12745c55e1d5a6e76d41684f1b507ea7c6b888ac
1//===- X86InstructionInfo.h - X86 Instruction Information ---------*-C++-*-===// 2// 3// This file contains the X86 implementation of the TargetInstrInfo class. 4// 5//===----------------------------------------------------------------------===// 6 7#ifndef X86INSTRUCTIONINFO_H 8#define X86INSTRUCTIONINFO_H 9 10#include "llvm/Target/TargetInstrInfo.h" 11#include "X86RegisterInfo.h" 12 13/// X86II - This namespace holds all of the target specific flags that 14/// instruction info tracks. 15/// 16namespace X86II { 17 enum { 18 //===------------------------------------------------------------------===// 19 // Instruction types. These are the standard/most common forms for X86 20 // instructions. 21 // 22 23 // PseudoFrm - This represents an instruction that is a pseudo instruction 24 // or one that has not been implemented yet. It is illegal to code generate 25 // it, but tolerated for intermediate implementation stages. 26 Pseudo = 0, 27 28 /// Raw - This form is for instructions that don't have any operands, so 29 /// they are just a fixed opcode value, like 'leave'. 30 RawFrm = 1, 31 32 /// AddRegFrm - This form is used for instructions like 'push r32' that have 33 /// their one register operand added to their opcode. 34 AddRegFrm = 2, 35 36 /// MRMDestReg - This form is used for instructions that use the Mod/RM byte 37 /// to specify a destination, which in this case is a register. 38 /// 39 MRMDestReg = 3, 40 41 /// MRMDestMem - This form is used for instructions that use the Mod/RM byte 42 /// to specify a destination, which in this case is memory. 43 /// 44 MRMDestMem = 4, 45 46 /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte 47 /// to specify a source, which in this case is a register. 48 /// 49 MRMSrcReg = 5, 50 51 /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte 52 /// to specify a source, which in this case is memory. 53 /// 54 MRMSrcMem = 6, 55 56 /// MRMS[0-7][rm] - These forms are used to represent instructions that use 57 /// a Mod/RM byte, and use the middle field to hold extended opcode 58 /// information. In the intel manual these are represented as /0, /1, ... 59 /// 60 61 // First, instructions that operate on a register r/m operand... 62 MRMS0r = 16, MRMS1r = 17, MRMS2r = 18, MRMS3r = 19, // Format /0 /1 /2 /3 63 MRMS4r = 20, MRMS5r = 21, MRMS6r = 22, MRMS7r = 23, // Format /4 /5 /6 /7 64 65 // Next, instructions that operate on a memory r/m operand... 66 MRMS0m = 24, MRMS1m = 25, MRMS2m = 26, MRMS3m = 27, // Format /0 /1 /2 /3 67 MRMS4m = 28, MRMS5m = 29, MRMS6m = 30, MRMS7m = 31, // Format /4 /5 /6 /7 68 69 FormMask = 31, 70 71 //===------------------------------------------------------------------===// 72 // Actual flags... 73 74 /// Void - Set if this instruction produces no value 75 Void = 1 << 5, 76 77 // OpSize - Set if this instruction requires an operand size prefix (0x66), 78 // which most often indicates that the instruction operates on 16 bit data 79 // instead of 32 bit data. 80 OpSize = 1 << 6, 81 82 // Op0Mask - There are several prefix bytes that are used to form two byte 83 // opcodes. These are currently 0x0F, and 0xD8-0xDF. This mask is used to 84 // obtain the setting of this field. If no bits in this field is set, there 85 // is no prefix byte for obtaining a multibyte opcode. 86 // 87 Op0Mask = 0xF << 7, 88 Op0Shift = 7, 89 90 // TB - TwoByte - Set if this instruction has a two byte opcode, which 91 // starts with a 0x0F byte before the real opcode. 92 TB = 1 << 7, 93 94 // D8-DF - These escape opcodes are used by the floating point unit. These 95 // values must remain sequential. 96 D8 = 2 << 7, D9 = 3 << 7, DA = 4 << 7, DB = 5 << 7, 97 DC = 6 << 7, DD = 7 << 7, DE = 8 << 7, DF = 9 << 7, 98 99 //===------------------------------------------------------------------===// 100 // This three-bit field describes the size of a memory operand. Zero is 101 // unused so that we can tell if we forgot to set a value. 102 Arg8 = 1 << 11, 103 Arg16 = 2 << 11, 104 Arg32 = 3 << 11, 105 Arg64 = 4 << 11, // 64 bit int argument for FILD64 106 ArgF32 = 5 << 11, 107 ArgF64 = 6 << 11, 108 ArgF80 = 7 << 11, 109 ArgMask = 7 << 11, 110 111 //===------------------------------------------------------------------===// 112 // FP Instruction Classification... Zero is non-fp instruction. 113 114 // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0 115 ZeroArgFP = 1 << 14, 116 117 // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst 118 OneArgFP = 2 << 14, 119 120 // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a 121 // result back to ST(0). For example, fcos, fsqrt, etc. 122 // 123 OneArgFPRW = 3 << 14, 124 125 // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an 126 // explicit argument, storing the result to either ST(0) or the implicit 127 // argument. For example: fadd, fsub, fmul, etc... 128 TwoArgFP = 4 << 14, 129 130 // SpecialFP - Special instruction forms. Dispatch by opcode explicitly. 131 SpecialFP = 5 << 14, 132 133 // FPTypeMask - Mask for all of the FP types... 134 FPTypeMask = 7 << 14, 135 136 // Bits 17 -> 31 are unused 137 }; 138} 139 140class X86InstrInfo : public TargetInstrInfo { 141 const X86RegisterInfo RI; 142public: 143 X86InstrInfo(); 144 145 /// getRegisterInfo - TargetInstrInfo is a superset of MRegister info. As 146 /// such, whenever a client has an instance of instruction info, it should 147 /// always be able to get register info as well (through this method). 148 /// 149 virtual const MRegisterInfo &getRegisterInfo() const { return RI; } 150 151 /// createNOPinstr - returns the target's implementation of NOP, which is 152 /// usually a pseudo-instruction, implemented by a degenerate version of 153 /// another instruction, e.g. X86: `xchg ax, ax'; SparcV9: `sethi r0, r0, r0' 154 /// 155 MachineInstr* createNOPinstr() const; 156 157 /// isNOPinstr - not having a special NOP opcode, we need to know if a given 158 /// instruction is interpreted as an `official' NOP instr, i.e., there may be 159 /// more than one way to `do nothing' but only one canonical way to slack off. 160 /// 161 bool isNOPinstr(const MachineInstr &MI) const; 162 163 /// print - Print out an x86 instruction in intel syntax 164 /// 165 virtual void print(const MachineInstr *MI, std::ostream &O, 166 const TargetMachine &TM) const; 167 168 // getBaseOpcodeFor - This function returns the "base" X86 opcode for the 169 // specified opcode number. 170 // 171 unsigned char getBaseOpcodeFor(unsigned Opcode) const; 172}; 173 174 175#endif 176