xref: /system/bt/stack/sdp/sdp_utils.cc

/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This file contains SDP utility functions
 *
 ******************************************************************************/

#include <netinet/in.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "bt_common.h"
#include "bt_types.h"

#include "hcidefs.h"
#include "hcimsgs.h"
#include "l2cdefs.h"

#include "sdp_api.h"
#include "sdpint.h"

#include "btu.h"

static const uint8_t sdp_base_uuid[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                                        0x10, 0x00, 0x80, 0x00, 0x00, 0x80,
                                        0x5F, 0x9B, 0x34, 0xFB};

/*******************************************************************************
 *
 * Function         sdpu_find_ccb_by_cid
 *
 * Description      This function searches the CCB table for an entry with the
 *                  passed CID.
 *
 * Returns          the CCB address, or NULL if not found.
 *
 ******************************************************************************/
tCONN_CB* sdpu_find_ccb_by_cid(uint16_t cid) {
  uint16_t xx;
  tCONN_CB* p_ccb;

  /* Look through each connection control block */
  for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) {
    if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->connection_id == cid))
      return (p_ccb);
  }

  /* If here, not found */
  return (NULL);
}

/*******************************************************************************
 *
 * Function         sdpu_find_ccb_by_db
 *
 * Description      This function searches the CCB table for an entry with the
 *                  passed discovery db.
 *
 * Returns          the CCB address, or NULL if not found.
 *
 ******************************************************************************/
tCONN_CB* sdpu_find_ccb_by_db(tSDP_DISCOVERY_DB* p_db) {
  uint16_t xx;
  tCONN_CB* p_ccb;

  if (p_db) {
    /* Look through each connection control block */
    for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) {
      if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->p_db == p_db))
        return (p_ccb);
    }
  }
  /* If here, not found */
  return (NULL);
}

/*******************************************************************************
 *
 * Function         sdpu_allocate_ccb
 *
 * Description      This function allocates a new CCB.
 *
 * Returns          CCB address, or NULL if none available.
 *
 ******************************************************************************/
tCONN_CB* sdpu_allocate_ccb(void) {
  uint16_t xx;
  tCONN_CB* p_ccb;

  /* Look through each connection control block for a free one */
  for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) {
    if (p_ccb->con_state == SDP_STATE_IDLE) {
      alarm_t* alarm = p_ccb->sdp_conn_timer;
      memset(p_ccb, 0, sizeof(tCONN_CB));
      p_ccb->sdp_conn_timer = alarm;
      return (p_ccb);
    }
  }

  /* If here, no free CCB found */
  return (NULL);
}

/*******************************************************************************
 *
 * Function         sdpu_release_ccb
 *
 * Description      This function releases a CCB.
 *
 * Returns          void
 *
 ******************************************************************************/
void sdpu_release_ccb(tCONN_CB* p_ccb) {
  /* Ensure timer is stopped */
  alarm_cancel(p_ccb->sdp_conn_timer);

  /* Drop any response pointer we may be holding */
  p_ccb->con_state = SDP_STATE_IDLE;
  p_ccb->is_attr_search = false;

  /* Free the response buffer */
  if (p_ccb->rsp_list) SDP_TRACE_DEBUG("releasing SDP rsp_list");
  osi_free_and_reset((void**)&p_ccb->rsp_list);
}

/*******************************************************************************
 *
 * Function         sdpu_build_attrib_seq
 *
 * Description      This function builds an attribute sequence from the list of
 *                  passed attributes. It is also passed the address of the
 *                  output buffer.
 *
 * Returns          Pointer to next byte in the output buffer.
 *
 ******************************************************************************/
uint8_t* sdpu_build_attrib_seq(uint8_t* p_out, uint16_t* p_attr,
                               uint16_t num_attrs) {
  uint16_t xx;

  /* First thing is the data element header. See if the length fits 1 byte */
  /* If no attributes, assume a 4-byte wildcard */
  if (!p_attr)
    xx = 5;
  else
    xx = num_attrs * 3;

  if (xx > 255) {
    UINT8_TO_BE_STREAM(p_out,
                       (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
    UINT16_TO_BE_STREAM(p_out, xx);
  } else {
    UINT8_TO_BE_STREAM(p_out,
                       (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
    UINT8_TO_BE_STREAM(p_out, xx);
  }

  /* If there are no attributes specified, assume caller wants wildcard */
  if (!p_attr) {
    UINT8_TO_BE_STREAM(p_out, (UINT_DESC_TYPE << 3) | SIZE_FOUR_BYTES);
    UINT16_TO_BE_STREAM(p_out, 0);
    UINT16_TO_BE_STREAM(p_out, 0xFFFF);
  } else {
    /* Loop through and put in all the attributes(s) */
    for (xx = 0; xx < num_attrs; xx++, p_attr++) {
      UINT8_TO_BE_STREAM(p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
      UINT16_TO_BE_STREAM(p_out, *p_attr);
    }
  }

  return (p_out);
}

/*******************************************************************************
 *
 * Function         sdpu_build_attrib_entry
 *
 * Description      This function builds an attribute entry from the passed
 *                  attribute record. It is also passed the address of the
 *                  output buffer.
 *
 * Returns          Pointer to next byte in the output buffer.
 *
 ******************************************************************************/
uint8_t* sdpu_build_attrib_entry(uint8_t* p_out, tSDP_ATTRIBUTE* p_attr) {
  /* First, store the attribute ID. Goes as a UINT */
  UINT8_TO_BE_STREAM(p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
  UINT16_TO_BE_STREAM(p_out, p_attr->id);

  /* the attribute is in the db record.
   * assuming the attribute len is less than SDP_MAX_ATTR_LEN */
  switch (p_attr->type) {
    case TEXT_STR_DESC_TYPE:     /* 4 */
    case DATA_ELE_SEQ_DESC_TYPE: /* 6 */
    case DATA_ELE_ALT_DESC_TYPE: /* 7 */
    case URL_DESC_TYPE:          /* 8 */
#if (SDP_MAX_ATTR_LEN > 0xFFFF)
      if (p_attr->len > 0xFFFF) {
        UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_IN_NEXT_LONG);
        UINT32_TO_BE_STREAM(p_out, p_attr->len);
      } else
#endif /* 0xFFFF - 0xFF */
#if (SDP_MAX_ATTR_LEN > 0xFF)
          if (p_attr->len > 0xFF) {
        UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_IN_NEXT_WORD);
        UINT16_TO_BE_STREAM(p_out, p_attr->len);
      } else
#endif /* 0xFF and less*/
      {
        UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE);
        UINT8_TO_BE_STREAM(p_out, p_attr->len);
      }

      if (p_attr->value_ptr != NULL) {
        ARRAY_TO_BE_STREAM(p_out, p_attr->value_ptr, (int)p_attr->len);
      }

      return (p_out);
  }

  /* Now, store the attribute value */
  switch (p_attr->len) {
    case 1:
      UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_ONE_BYTE);
      break;
    case 2:
      UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_TWO_BYTES);
      break;
    case 4:
      UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_FOUR_BYTES);
      break;
    case 8:
      UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_EIGHT_BYTES);
      break;
    case 16:
      UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_SIXTEEN_BYTES);
      break;
    default:
      UINT8_TO_BE_STREAM(p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE);
      UINT8_TO_BE_STREAM(p_out, p_attr->len);
      break;
  }

  if (p_attr->value_ptr != NULL) {
    ARRAY_TO_BE_STREAM(p_out, p_attr->value_ptr, (int)p_attr->len);
  }

  return (p_out);
}

/*******************************************************************************
 *
 * Function         sdpu_build_n_send_error
 *
 * Description      This function builds and sends an error packet.
 *
 * Returns          void
 *
 ******************************************************************************/
void sdpu_build_n_send_error(tCONN_CB* p_ccb, uint16_t trans_num,
                             uint16_t error_code, char* p_error_text) {
  uint8_t *p_rsp, *p_rsp_start, *p_rsp_param_len;
  uint16_t rsp_param_len;
  BT_HDR* p_buf = (BT_HDR*)osi_malloc(SDP_DATA_BUF_SIZE);

  SDP_TRACE_WARNING("SDP - sdpu_build_n_send_error  code: 0x%x  CID: 0x%x",
                    error_code, p_ccb->connection_id);

  /* Send the packet to L2CAP */
  p_buf->offset = L2CAP_MIN_OFFSET;
  p_rsp = p_rsp_start = (uint8_t*)(p_buf + 1) + L2CAP_MIN_OFFSET;

  UINT8_TO_BE_STREAM(p_rsp, SDP_PDU_ERROR_RESPONSE);
  UINT16_TO_BE_STREAM(p_rsp, trans_num);

  /* Skip the parameter length, we need to add it at the end */
  p_rsp_param_len = p_rsp;
  p_rsp += 2;

  UINT16_TO_BE_STREAM(p_rsp, error_code);

  /* Unplugfest example traces do not have any error text */
  if (p_error_text)
    ARRAY_TO_BE_STREAM(p_rsp, p_error_text, (int)strlen(p_error_text));

  /* Go back and put the parameter length into the buffer */
  rsp_param_len = p_rsp - p_rsp_param_len - 2;
  UINT16_TO_BE_STREAM(p_rsp_param_len, rsp_param_len);

  /* Set the length of the SDP data in the buffer */
  p_buf->len = p_rsp - p_rsp_start;

  /* Send the buffer through L2CAP */
  L2CA_DataWrite(p_ccb->connection_id, p_buf);
}

/*******************************************************************************
 *
 * Function         sdpu_extract_uid_seq
 *
 * Description      This function extracts a UUID sequence from the passed input
 *                  buffer, and puts it into the passed output list.
 *
 * Returns          Pointer to next byte in the input buffer after the sequence.
 *
 ******************************************************************************/
uint8_t* sdpu_extract_uid_seq(uint8_t* p, uint16_t param_len,
                              tSDP_UUID_SEQ* p_seq) {
  uint8_t* p_seq_end;
  uint8_t descr, type, size;
  uint32_t seq_len, uuid_len;

  /* Assume none found */
  p_seq->num_uids = 0;

  /* A UID sequence is composed of a bunch of UIDs. */

  BE_STREAM_TO_UINT8(descr, p);
  type = descr >> 3;
  size = descr & 7;

  if (type != DATA_ELE_SEQ_DESC_TYPE) return (NULL);

  switch (size) {
    case SIZE_TWO_BYTES:
      seq_len = 2;
      break;
    case SIZE_FOUR_BYTES:
      seq_len = 4;
      break;
    case SIZE_SIXTEEN_BYTES:
      seq_len = 16;
      break;
    case SIZE_IN_NEXT_BYTE:
      BE_STREAM_TO_UINT8(seq_len, p);
      break;
    case SIZE_IN_NEXT_WORD:
      BE_STREAM_TO_UINT16(seq_len, p);
      break;
    case SIZE_IN_NEXT_LONG:
      BE_STREAM_TO_UINT32(seq_len, p);
      break;
    default:
      return (NULL);
  }

  if (seq_len >= param_len) return (NULL);

  p_seq_end = p + seq_len;

  /* Loop through, extracting the UIDs */
  for (; p < p_seq_end;) {
    BE_STREAM_TO_UINT8(descr, p);
    type = descr >> 3;
    size = descr & 7;

    if (type != UUID_DESC_TYPE) return (NULL);

    switch (size) {
      case SIZE_TWO_BYTES:
        uuid_len = 2;
        break;
      case SIZE_FOUR_BYTES:
        uuid_len = 4;
        break;
      case SIZE_SIXTEEN_BYTES:
        uuid_len = 16;
        break;
      case SIZE_IN_NEXT_BYTE:
        BE_STREAM_TO_UINT8(uuid_len, p);
        break;
      case SIZE_IN_NEXT_WORD:
        BE_STREAM_TO_UINT16(uuid_len, p);
        break;
      case SIZE_IN_NEXT_LONG:
        BE_STREAM_TO_UINT32(uuid_len, p);
        break;
      default:
        return (NULL);
    }

    /* If UUID length is valid, copy it across */
    if ((uuid_len == 2) || (uuid_len == 4) || (uuid_len == 16)) {
      p_seq->uuid_entry[p_seq->num_uids].len = (uint16_t)uuid_len;
      BE_STREAM_TO_ARRAY(p, p_seq->uuid_entry[p_seq->num_uids].value,
                         (int)uuid_len);
      p_seq->num_uids++;
    } else
      return (NULL);

    /* We can only do so many */
    if (p_seq->num_uids >= MAX_UUIDS_PER_SEQ) return (NULL);
  }

  if (p != p_seq_end) return (NULL);

  return (p);
}

/*******************************************************************************
 *
 * Function         sdpu_extract_attr_seq
 *
 * Description      This function extracts an attribute sequence from the passed
 *                  input buffer, and puts it into the passed output list.
 *
 * Returns          Pointer to next byte in the input buffer after the sequence.
 *
 ******************************************************************************/
uint8_t* sdpu_extract_attr_seq(uint8_t* p, uint16_t param_len,
                               tSDP_ATTR_SEQ* p_seq) {
  uint8_t* p_end_list;
  uint8_t descr, type, size;
  uint32_t list_len, attr_len;

  /* Assume none found */
  p_seq->num_attr = 0;

  /* Get attribute sequence info */
  BE_STREAM_TO_UINT8(descr, p);
  type = descr >> 3;
  size = descr & 7;

  if (type != DATA_ELE_SEQ_DESC_TYPE) return (p);

  switch (size) {
    case SIZE_IN_NEXT_BYTE:
      BE_STREAM_TO_UINT8(list_len, p);
      break;

    case SIZE_IN_NEXT_WORD:
      BE_STREAM_TO_UINT16(list_len, p);
      break;

    case SIZE_IN_NEXT_LONG:
      BE_STREAM_TO_UINT32(list_len, p);
      break;

    default:
      return (p);
  }

  if (list_len > param_len) return (p);

  p_end_list = p + list_len;

  /* Loop through, extracting the attribute IDs */
  for (; p < p_end_list;) {
    BE_STREAM_TO_UINT8(descr, p);
    type = descr >> 3;
    size = descr & 7;

    if (type != UINT_DESC_TYPE) return (p);

    switch (size) {
      case SIZE_TWO_BYTES:
        attr_len = 2;
        break;
      case SIZE_FOUR_BYTES:
        attr_len = 4;
        break;
      case SIZE_IN_NEXT_BYTE:
        BE_STREAM_TO_UINT8(attr_len, p);
        break;
      case SIZE_IN_NEXT_WORD:
        BE_STREAM_TO_UINT16(attr_len, p);
        break;
      case SIZE_IN_NEXT_LONG:
        BE_STREAM_TO_UINT32(attr_len, p);
        break;
      default:
        return (NULL);
        break;
    }

    /* Attribute length must be 2-bytes or 4-bytes for a paired entry. */
    if (attr_len == 2) {
      BE_STREAM_TO_UINT16(p_seq->attr_entry[p_seq->num_attr].start, p);
      p_seq->attr_entry[p_seq->num_attr].end =
          p_seq->attr_entry[p_seq->num_attr].start;
    } else if (attr_len == 4) {
      BE_STREAM_TO_UINT16(p_seq->attr_entry[p_seq->num_attr].start, p);
      BE_STREAM_TO_UINT16(p_seq->attr_entry[p_seq->num_attr].end, p);
    } else
      return (NULL);

    /* We can only do so many */
    if (++p_seq->num_attr >= MAX_ATTR_PER_SEQ) return (NULL);
  }

  return (p);
}

/*******************************************************************************
 *
 * Function         sdpu_get_len_from_type
 *
 * Description      This function gets the length
 *
 * Returns          void
 *
 ******************************************************************************/
uint8_t* sdpu_get_len_from_type(uint8_t* p, uint8_t type, uint32_t* p_len) {
  uint8_t u8;
  uint16_t u16;
  uint32_t u32;

  switch (type & 7) {
    case SIZE_ONE_BYTE:
      *p_len = 1;
      break;
    case SIZE_TWO_BYTES:
      *p_len = 2;
      break;
    case SIZE_FOUR_BYTES:
      *p_len = 4;
      break;
    case SIZE_EIGHT_BYTES:
      *p_len = 8;
      break;
    case SIZE_SIXTEEN_BYTES:
      *p_len = 16;
      break;
    case SIZE_IN_NEXT_BYTE:
      BE_STREAM_TO_UINT8(u8, p);
      *p_len = u8;
      break;
    case SIZE_IN_NEXT_WORD:
      BE_STREAM_TO_UINT16(u16, p);
      *p_len = u16;
      break;
    case SIZE_IN_NEXT_LONG:
      BE_STREAM_TO_UINT32(u32, p);
      *p_len = (uint16_t)u32;
      break;
  }

  return (p);
}

/*******************************************************************************
 *
 * Function         sdpu_is_base_uuid
 *
 * Description      This function checks a 128-bit UUID with the base to see if
 *                  it matches. Only the last 12 bytes are compared.
 *
 * Returns          true if matched, else false
 *
 ******************************************************************************/
bool sdpu_is_base_uuid(uint8_t* p_uuid) {
  uint16_t xx;

  for (xx = 4; xx < MAX_UUID_SIZE; xx++)
    if (p_uuid[xx] != sdp_base_uuid[xx]) return (false);

  /* If here, matched */
  return (true);
}

/*******************************************************************************
 *
 * Function         sdpu_compare_uuid_arrays
 *
 * Description      This function compares 2 BE UUIDs. If needed, they are
 *                  expanded to 128-bit UUIDs, then compared.
 *
 * NOTE             it is assumed that the arrays are in Big Endian format
 *
 * Returns          true if matched, else false
 *
 ******************************************************************************/
bool sdpu_compare_uuid_arrays(uint8_t* p_uuid1, uint32_t len1, uint8_t* p_uuid2,
                              uint16_t len2) {
  uint8_t nu1[MAX_UUID_SIZE];
  uint8_t nu2[MAX_UUID_SIZE];

  if (((len1 != 2) && (len1 != 4) && (len1 != 16)) ||
      ((len2 != 2) && (len2 != 4) && (len2 != 16))) {
    SDP_TRACE_ERROR("%s: invalid length", __func__);
    return false;
  }

  /* If lengths match, do a straight compare */
  if (len1 == len2) {
    if (len1 == 2)
      return ((p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1]));
    if (len1 == 4)
      return ((p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1]) &&
              (p_uuid1[2] == p_uuid2[2]) && (p_uuid1[3] == p_uuid2[3]));
    else
      return (memcmp(p_uuid1, p_uuid2, (size_t)len1) == 0);
  } else if (len1 > len2) {
    /* If the len1 was 4-byte, (so len2 is 2-byte), compare on the fly */
    if (len1 == 4) {
      return ((p_uuid1[0] == 0) && (p_uuid1[1] == 0) &&
              (p_uuid1[2] == p_uuid2[0]) && (p_uuid1[3] == p_uuid2[1]));
    } else {
      /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */
      memcpy(nu1, p_uuid1, MAX_UUID_SIZE);
      memcpy(nu2, sdp_base_uuid, MAX_UUID_SIZE);

      if (len2 == 4)
        memcpy(nu2, p_uuid2, len2);
      else if (len2 == 2)
        memcpy(nu2 + 2, p_uuid2, len2);

      return (memcmp(nu1, nu2, MAX_UUID_SIZE) == 0);
    }
  } else {
    /* len2 is greater than len1 */
    /* If the len2 was 4-byte, (so len1 is 2-byte), compare on the fly */
    if (len2 == 4) {
      return ((p_uuid2[0] == 0) && (p_uuid2[1] == 0) &&
              (p_uuid2[2] == p_uuid1[0]) && (p_uuid2[3] == p_uuid1[1]));
    } else {
      /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */
      memcpy(nu2, p_uuid2, MAX_UUID_SIZE);
      memcpy(nu1, sdp_base_uuid, MAX_UUID_SIZE);

      if (len1 == 4)
        memcpy(nu1, p_uuid1, (size_t)len1);
      else if (len1 == 2)
        memcpy(nu1 + 2, p_uuid1, (size_t)len1);

      return (memcmp(nu1, nu2, MAX_UUID_SIZE) == 0);
    }
  }
}

/*******************************************************************************
 *
 * Function         sdpu_compare_bt_uuids
 *
 * Description      This function compares 2 BT UUID structures.
 *
 * NOTE             it is assumed that BT UUID structures are compressed to the
 *                  smallest possible UUIDs (by removing the base SDP UUID)
 *
 * Returns          true if matched, else false
 *
 ******************************************************************************/
bool sdpu_compare_bt_uuids(tBT_UUID* p_uuid1, tBT_UUID* p_uuid2) {
  /* Lengths must match for BT UUIDs to match */
  if (p_uuid1->len == p_uuid2->len) {
    if (p_uuid1->len == 2)
      return (p_uuid1->uu.uuid16 == p_uuid2->uu.uuid16);
    else if (p_uuid1->len == 4)
      return (p_uuid1->uu.uuid32 == p_uuid2->uu.uuid32);
    else if (!memcmp(p_uuid1->uu.uuid128, p_uuid2->uu.uuid128, 16))
      return (true);
  }

  return (false);
}

/*******************************************************************************
 *
 * Function         sdpu_compare_uuid_with_attr
 *
 * Description      This function compares a BT UUID structure with the UUID in
 *                  an SDP attribute record. If needed, they are expanded to
 *                  128-bit UUIDs, then compared.
 *
 * NOTE           - it is assumed that BT UUID structures are compressed to the
 *                  smallest possible UUIDs (by removing the base SDP UUID).
 *                - it is also assumed that the discovery atribute is compressed
 *                  to the smallest possible
 *
 * Returns          true if matched, else false
 *
 ******************************************************************************/
bool sdpu_compare_uuid_with_attr(tBT_UUID* p_btuuid, tSDP_DISC_ATTR* p_attr) {
  uint16_t attr_len = SDP_DISC_ATTR_LEN(p_attr->attr_len_type);

  /* Since both UUIDs are compressed, lengths must match  */
  if (p_btuuid->len != attr_len) return (false);

  if (p_btuuid->len == 2)
    return (bool)(p_btuuid->uu.uuid16 == p_attr->attr_value.v.u16);
  else if (p_btuuid->len == 4)
    return (bool)(p_btuuid->uu.uuid32 == p_attr->attr_value.v.u32);
  else if (!memcmp(p_btuuid->uu.uuid128, (void*)p_attr->attr_value.v.array,
                   MAX_UUID_SIZE))
    return (true);

  return (false);
}

/*******************************************************************************
 *
 * Function         sdpu_sort_attr_list
 *
 * Description      sorts a list of attributes in numeric order from lowest to
 *                  highest to conform to SDP specification
 *
 * Returns          void
 *
 ******************************************************************************/
void sdpu_sort_attr_list(uint16_t num_attr, tSDP_DISCOVERY_DB* p_db) {
  uint16_t i;
  uint16_t x;

  /* Done if no attributes to sort */
  if (num_attr <= 1) {
    return;
  } else if (num_attr > SDP_MAX_ATTR_FILTERS) {
    num_attr = SDP_MAX_ATTR_FILTERS;
  }

  num_attr--; /* for the for-loop */
  for (i = 0; i < num_attr;) {
    if (p_db->attr_filters[i] > p_db->attr_filters[i + 1]) {
      /* swap the attribute IDs and start from the beginning */
      x = p_db->attr_filters[i];
      p_db->attr_filters[i] = p_db->attr_filters[i + 1];
      p_db->attr_filters[i + 1] = x;

      i = 0;
    } else
      i++;
  }
}

/*******************************************************************************
 *
 * Function         sdpu_get_list_len
 *
 * Description      gets the total list length in the sdp database for a given
 *                  uid sequence and attr sequence
 *
 * Returns          void
 *
 ******************************************************************************/
uint16_t sdpu_get_list_len(tSDP_UUID_SEQ* uid_seq, tSDP_ATTR_SEQ* attr_seq) {
  tSDP_RECORD* p_rec;
  uint16_t len = 0;
  uint16_t len1;

  for (p_rec = sdp_db_service_search(NULL, uid_seq); p_rec;
       p_rec = sdp_db_service_search(p_rec, uid_seq)) {
    len += 3;

    len1 = sdpu_get_attrib_seq_len(p_rec, attr_seq);

    if (len1 != 0)
      len += len1;
    else
      len -= 3;
  }
  return len;
}

/*******************************************************************************
 *
 * Function         sdpu_get_attrib_seq_len
 *
 * Description      gets the length of the specific attributes in a given
 *                  sdp record
 *
 * Returns          void
 *
 ******************************************************************************/
uint16_t sdpu_get_attrib_seq_len(tSDP_RECORD* p_rec, tSDP_ATTR_SEQ* attr_seq) {
  tSDP_ATTRIBUTE* p_attr;
  uint16_t len1 = 0;
  uint16_t xx;
  bool is_range = false;
  uint16_t start_id = 0, end_id = 0;

  for (xx = 0; xx < attr_seq->num_attr; xx++) {
    if (is_range == false) {
      start_id = attr_seq->attr_entry[xx].start;
      end_id = attr_seq->attr_entry[xx].end;
    }
    p_attr = sdp_db_find_attr_in_rec(p_rec, start_id, end_id);
    if (p_attr) {
      len1 += sdpu_get_attrib_entry_len(p_attr);

      /* If doing a range, stick with this one till no more attributes found */
      if (start_id != end_id) {
        /* Update for next time through */
        start_id = p_attr->id + 1;
        xx--;
        is_range = true;
      } else
        is_range = false;
    } else
      is_range = false;
  }
  return len1;
}

/*******************************************************************************
 *
 * Function         sdpu_get_attrib_entry_len
 *
 * Description      gets the length of a specific attribute
 *
 * Returns          void
 *
 ******************************************************************************/
uint16_t sdpu_get_attrib_entry_len(tSDP_ATTRIBUTE* p_attr) {
  uint16_t len = 3;

  /* the attribute is in the db record.
   * assuming the attribute len is less than SDP_MAX_ATTR_LEN */
  switch (p_attr->type) {
    case TEXT_STR_DESC_TYPE:     /* 4 */
    case DATA_ELE_SEQ_DESC_TYPE: /* 6 */
    case DATA_ELE_ALT_DESC_TYPE: /* 7 */
    case URL_DESC_TYPE:          /* 8 */
#if (SDP_MAX_ATTR_LEN > 0xFFFF)
      if (p_attr->len > 0xFFFF) {
        len += 5;
      } else
#endif /* 0xFFFF - 0xFF */
#if (SDP_MAX_ATTR_LEN > 0xFF)
          if (p_attr->len > 0xFF) {
        len += 3;
      } else
#endif /* 0xFF and less*/
      {
        len += 2;
      }
      len += p_attr->len;
      return len;
  }

  /* Now, the attribute value */
  switch (p_attr->len) {
    case 1:
    case 2:
    case 4:
    case 8:
    case 16:
      len += 1;
      break;
    default:
      len += 2;
      break;
  }

  len += p_attr->len;
  return len;
}

/*******************************************************************************
 *
 * Function         sdpu_build_partial_attrib_entry
 *
 * Description      This function fills a buffer with partial attribute. It is
 *                  assumed that the maximum size of any attribute is 256 bytes.
 *
 *                  p_out: output buffer
 *                  p_attr: attribute to be copied partially into p_out
 *                  rem_len: num bytes to copy into p_out
 *                  offset: current start offset within the attr that needs to
 *                          be copied
 *
 * Returns          Pointer to next byte in the output buffer.
 *                  offset is also updated
 *
 ******************************************************************************/
uint8_t* sdpu_build_partial_attrib_entry(uint8_t* p_out, tSDP_ATTRIBUTE* p_attr,
                                         uint16_t len, uint16_t* offset) {
  uint8_t* p_attr_buff =
      (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN);
  sdpu_build_attrib_entry(p_attr_buff, p_attr);

  uint16_t attr_len = sdpu_get_attrib_entry_len(p_attr);

  if (len > SDP_MAX_ATTR_LEN) {
    SDP_TRACE_ERROR("%s len %d exceeds SDP_MAX_ATTR_LEN", __func__, len);
    len = SDP_MAX_ATTR_LEN;
  }

  size_t len_to_copy =
      ((attr_len - *offset) < len) ? (attr_len - *offset) : len;
  memcpy(p_out, &p_attr_buff[*offset], len_to_copy);

  p_out = &p_out[len_to_copy];
  *offset += len_to_copy;

  osi_free(p_attr_buff);
  return p_out;
}

/*******************************************************************************
 *
 * Function         sdpu_uuid16_to_uuid128
 *
 * Description      This function converts UUID-16 to UUID-128 by including the
 *                  base UUID
 *
 *                  uuid16: 2-byte UUID
 *                  p_uuid128: Expanded 128-bit UUID
 *
 * Returns          None
 *
 ******************************************************************************/
void sdpu_uuid16_to_uuid128(uint16_t uuid16, uint8_t* p_uuid128) {
  uint16_t uuid16_bo;
  memset(p_uuid128, 0, 16);

  memcpy(p_uuid128, sdp_base_uuid, MAX_UUID_SIZE);
  uuid16_bo = ntohs(uuid16);
  memcpy(p_uuid128 + 2, &uuid16_bo, sizeof(uint16_t));
}