| Name | Value Type | Description |
|---|---|---|
| {@link #KEY_MIME} | String | The type of the format. |
| {@link #KEY_MAX_INPUT_SIZE} | Integer | optional, maximum size of a buffer of input data |
| {@link #KEY_BIT_RATE} | Integer | encoder-only, desired bitrate in bits/second |
| Name | Value Type | Description |
|---|---|---|
| {@link #KEY_WIDTH} | Integer | |
| {@link #KEY_HEIGHT} | Integer | |
| {@link #KEY_COLOR_FORMAT} | Integer | set by the user * for encoders, readable in the output format of decoders |
| {@link #KEY_FRAME_RATE} | Integer or Float | required for encoders, * optional for decoders |
| {@link #KEY_CAPTURE_RATE} | Integer | |
| {@link #KEY_I_FRAME_INTERVAL} | Integer (or Float) | encoder-only, * time-interval between key frames. * Float support added in {@link android.os.Build.VERSION_CODES#N_MR1} |
| {@link #KEY_INTRA_REFRESH_PERIOD} | Integer | encoder-only, optional |
| {@link #KEY_LATENCY} | Integer | encoder-only, optional |
| {@link #KEY_MAX_WIDTH} | Integer | decoder-only, optional, max-resolution width |
| {@link #KEY_MAX_HEIGHT} | Integer | decoder-only, optional, max-resolution height |
| {@link #KEY_REPEAT_PREVIOUS_FRAME_AFTER} | Long | encoder in surface-mode * only, optional |
| {@link #KEY_PUSH_BLANK_BUFFERS_ON_STOP} | Integer(1) | decoder rendering * to a surface only, optional |
| {@link #KEY_TEMPORAL_LAYERING} | String | encoder only, optional, * temporal-layering schema |
| Name | Value Type | Description |
|---|---|---|
| {@link #KEY_CHANNEL_COUNT} | Integer | |
| {@link #KEY_SAMPLE_RATE} | Integer | |
| {@link #KEY_PCM_ENCODING} | Integer | optional |
| {@link #KEY_IS_ADTS} | Integer | optional, if decoding AAC audio content, setting this key to 1 indicates that each audio frame is prefixed by the ADTS header. |
| {@link #KEY_AAC_PROFILE} | Integer | encoder-only, optional, if content is AAC audio, specifies the desired profile. |
| {@link #KEY_AAC_SBR_MODE} | Integer | encoder-only, optional, if content is AAC audio, specifies the desired SBR mode. |
| {@link #KEY_AAC_DRC_TARGET_REFERENCE_LEVEL} | Integer | decoder-only, optional, if content is AAC audio, specifies the target reference level. |
| {@link #KEY_AAC_ENCODED_TARGET_LEVEL} | Integer | decoder-only, optional, if content is AAC audio, specifies the target reference level used at encoder. |
| {@link #KEY_AAC_DRC_BOOST_FACTOR} | Integer | decoder-only, optional, if content is AAC audio, specifies the DRC boost factor. |
| {@link #KEY_AAC_DRC_ATTENUATION_FACTOR} | Integer | decoder-only, optional, if content is AAC audio, specifies the DRC attenuation factor. |
| {@link #KEY_AAC_DRC_HEAVY_COMPRESSION} | Integer | decoder-only, optional, if content is AAC audio, specifies whether to use heavy compression. |
| {@link #KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT} | Integer | decoder-only, optional, if content is AAC audio, specifies the maximum number of channels the decoder outputs. |
| {@link #KEY_AAC_DRC_EFFECT_TYPE} | Integer | decoder-only, optional, if content is AAC audio, specifies the MPEG-D DRC effect type to use. |
| {@link #KEY_CHANNEL_MASK} | Integer | optional, a mask of audio channel assignments |
| {@link #KEY_FLAC_COMPRESSION_LEVEL} | Integer | encoder-only, optional, if content is FLAC audio, specifies the desired compression level. |
| {@link #KEY_MIME} | String | The type of the format. |
| {@link #KEY_LANGUAGE} | String | The language of the content. |
| {@link #KEY_MIME} | String | The type of the format. |
| {@link #KEY_WIDTH} | Integer | |
| {@link #KEY_HEIGHT} | Integer | |
| {@link #KEY_COLOR_FORMAT} | Integer | set by the user * for encoders, readable in the output format of decoders |
| {@link #KEY_TILE_WIDTH} | Integer | required if the image has grid |
| {@link #KEY_TILE_HEIGHT} | Integer | required if the image has grid |
| {@link #KEY_GRID_ROWS} | Integer | required if the image has grid |
| {@link #KEY_GRID_COLUMNS} | Integer | required if the image has grid |
The associated value is an integer, using one of the * {@link AudioFormat}.ENCODING_PCM_ values.
* *This is an optional key for audio decoders and encoders specifying the * desired raw audio sample format during {@link MediaCodec#configure * MediaCodec.configure(…)} call. Use {@link MediaCodec#getInputFormat * MediaCodec.getInput}/{@link MediaCodec#getOutputFormat OutputFormat(…)} * to confirm the actual format. For the PCM decoder this key specifies both * input and output sample encodings.
* *This key is also used by {@link MediaExtractor} to specify the sample * format of audio data, if it is specified.
* *If this key is missing, the raw audio sample format is signed 16-bit short.
*/ public static final String KEY_PCM_ENCODING = "pcm-encoding"; /** * A key describing the capture rate of a video format in frames/sec. ** When capture rate is different than the frame rate, it means that the * video is acquired at a different rate than the playback, which produces * slow motion or timelapse effect during playback. Application can use the * value of this key to tell the relative speed ratio between capture and * playback rates when the video was recorded. *
** The associated value is an integer or a float. *
*/ public static final String KEY_CAPTURE_RATE = "capture-rate"; /** * A key describing the frequency of key frames expressed in seconds between key frames. ** This key is used by video encoders. * A negative value means no key frames are requested after the first frame. * A zero value means a stream containing all key frames is requested. *
* Most video encoders will convert this value of the number of non-key-frames between * key-frames, using the {@linkplain #KEY_FRAME_RATE frame rate} information; therefore, * if the actual frame rate differs (e.g. input frames are dropped or the frame rate * changes), the time interval between key frames will not be the * configured value. *
* The associated value is an integer (or float since * {@link android.os.Build.VERSION_CODES#N_MR1}). */ public static final String KEY_I_FRAME_INTERVAL = "i-frame-interval"; /** * An optional key describing the period of intra refresh in frames. This is an * optional parameter that applies only to video encoders. If encoder supports it * ({@link MediaCodecInfo.CodecCapabilities#FEATURE_IntraRefresh}), the whole * frame is completely refreshed after the specified period. Also for each frame, * a fix subset of macroblocks must be intra coded which leads to more constant bitrate * than inserting a key frame. This key is recommended for video streaming applications * as it provides low-delay and good error-resilience. This key is ignored if the * video encoder does not support the intra refresh feature. Use the output format to * verify that this feature was enabled. * The associated value is an integer. */ public static final String KEY_INTRA_REFRESH_PERIOD = "intra-refresh-period"; /** * A key describing the temporal layering schema. This is an optional parameter * that applies only to video encoders. Use {@link MediaCodec#getOutputFormat} * after {@link MediaCodec#configure configure} to query if the encoder supports * the desired schema. Supported values are {@code webrtc.vp8.N-layer}, * {@code android.generic.N}, {@code android.generic.N+M} and {@code none}, where * {@code N} denotes the total number of non-bidirectional layers (which must be at least 1) * and {@code M} denotes the total number of bidirectional layers (which must be non-negative). *
{@code android.generic.*} schemas have been added in {@link * android.os.Build.VERSION_CODES#N_MR1}. *
* The encoder may support fewer temporal layers, in which case the output format * will contain the configured schema. If the encoder does not support temporal * layering, the output format will not have an entry with this key. * The associated value is a string. */ public static final String KEY_TEMPORAL_LAYERING = "ts-schema"; /** * A key describing the stride of the video bytebuffer layout. * Stride (or row increment) is the difference between the index of a pixel * and that of the pixel directly underneath. For YUV 420 formats, the * stride corresponds to the Y plane; the stride of the U and V planes can * be calculated based on the color format, though it is generally undefined * and depends on the device and release. * The associated value is an integer, representing number of bytes. */ public static final String KEY_STRIDE = "stride"; /** * A key describing the plane height of a multi-planar (YUV) video bytebuffer layout. * Slice height (or plane height/vertical stride) is the number of rows that must be skipped * to get from the top of the Y plane to the top of the U plane in the bytebuffer. In essence * the offset of the U plane is sliceHeight * stride. The height of the U/V planes * can be calculated based on the color format, though it is generally undefined * and depends on the device and release. * The associated value is an integer, representing number of rows. */ public static final String KEY_SLICE_HEIGHT = "slice-height"; /** * Applies only when configuring a video encoder in "surface-input" mode. * The associated value is a long and gives the time in microseconds * after which the frame previously submitted to the encoder will be * repeated (once) if no new frame became available since. */ public static final String KEY_REPEAT_PREVIOUS_FRAME_AFTER = "repeat-previous-frame-after"; /** * If specified when configuring a video decoder rendering to a surface, * causes the decoder to output "blank", i.e. black frames to the surface * when stopped to clear out any previously displayed contents. * The associated value is an integer of value 1. */ public static final String KEY_PUSH_BLANK_BUFFERS_ON_STOP = "push-blank-buffers-on-shutdown"; /** * A key describing the duration (in microseconds) of the content. * The associated value is a long. */ public static final String KEY_DURATION = "durationUs"; /** * A key mapping to a value of 1 if the content is AAC audio and * audio frames are prefixed with an ADTS header. * The associated value is an integer (0 or 1). * This key is only supported when _decoding_ content, it cannot * be used to configure an encoder to emit ADTS output. */ public static final String KEY_IS_ADTS = "is-adts"; /** * A key describing the channel composition of audio content. This mask * is composed of bits drawn from channel mask definitions in {@link android.media.AudioFormat}. * The associated value is an integer. */ public static final String KEY_CHANNEL_MASK = "channel-mask"; /** * A key describing the AAC profile to be used (AAC audio formats only). * Constants are declared in {@link android.media.MediaCodecInfo.CodecProfileLevel}. */ public static final String KEY_AAC_PROFILE = "aac-profile"; /** * A key describing the AAC SBR mode to be used (AAC audio formats only). * The associated value is an integer and can be set to following values: *
This key is only used during encoding. */ public static final String KEY_AAC_SBR_MODE = "aac-sbr-mode"; /** * A key describing the maximum number of channels that can be output by the AAC decoder. * By default, the decoder will output the same number of channels as present in the encoded * stream, if supported. Set this value to limit the number of output channels, and use * the downmix information in the stream, if available. *
Values larger than the number of channels in the content to decode are ignored. *
This key is only used during decoding. */ public static final String KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT = "aac-max-output-channel_count"; /** * A key describing a gain to be applied so that the output loudness matches the * Target Reference Level. This is typically used to normalize loudness across program items. * The gain is derived as the difference between the Target Reference Level and the * Program Reference Level. The latter can be given in the bitstream and indicates the actual * loudness value of the program item. *
The Target Reference Level controls loudness normalization for both MPEG-4 DRC and * MPEG-D DRC. *
The value is given as an integer value between * 40 and 127, and is calculated as -4 * Target Reference Level in LKFS. * Therefore, it represents the range of -10 to -31.75 LKFS. *
The default value on mobile devices is 64 (-16 LKFS). *
This key is only used during decoding. */ public static final String KEY_AAC_DRC_TARGET_REFERENCE_LEVEL = "aac-target-ref-level"; /** * A key describing for selecting the DRC effect type for MPEG-D DRC. * The supported values are defined in ISO/IEC 23003-4:2015 and are described as follows: *
| Value | Effect |
|---|---|
| -1 | Off |
| 0 | None |
| 1 | Late night |
| 2 | Noisy environment |
| 3 | Limited playback range |
| 4 | Low playback level |
| 5 | Dialog enhancement |
| 6 | General compression |
The value -1 (Off) disables DRC processing, while loudness normalization may still be
* active and dependent on KEY_AAC_DRC_TARGET_REFERENCE_LEVEL.
* The value 0 (None) automatically enables DRC processing if necessary to prevent signal
* clipping
* The value 6 (General compression) can be used for enabling MPEG-D DRC without particular
* DRC effect type request.
* The default DRC effect type is 3 ("Limited playback range") on mobile devices.
*
This key is only used during decoding. */ public static final String KEY_AAC_DRC_EFFECT_TYPE = "aac-drc-effect-type"; /** * A key describing the target reference level that was assumed at the encoder for * calculation of attenuation gains for clipping prevention. *
If it is known, this information can be provided as an integer value between * 0 and 127, which is calculated as -4 * Encoded Target Level in LKFS. * If the Encoded Target Level is unknown, the value can be set to -1. *
The default value is -1 (unknown). *
The value is ignored when heavy compression is used (see * {@link #KEY_AAC_DRC_HEAVY_COMPRESSION}). *
This key is only used during decoding. */ public static final String KEY_AAC_ENCODED_TARGET_LEVEL = "aac-encoded-target-level"; /** * A key describing the boost factor allowing to adapt the dynamics of the output to the * actual listening requirements. This relies on DRC gain sequences that can be transmitted in * the encoded bitstream to be able to reduce the dynamics of the output signal upon request. * This factor enables the user to select how much of the gains are applied. *
Positive gains (boost) and negative gains (attenuation, see * {@link #KEY_AAC_DRC_ATTENUATION_FACTOR}) can be controlled separately for a better match * to different use-cases. *
Typically, attenuation gains are sent for loud signal segments, and boost gains are sent * for soft signal segments. If the output is listened to in a noisy environment, for example, * the boost factor is used to enable the positive gains, i.e. to amplify soft signal segments * beyond the noise floor. But for listening late at night, the attenuation * factor is used to enable the negative gains, to prevent loud signal from surprising * the listener. In applications which generally need a low dynamic range, both the boost factor * and the attenuation factor are used in order to enable all DRC gains. *
In order to prevent clipping, it is also recommended to apply the attenuation gains * in case of a downmix and/or loudness normalization to high target reference levels. *
Both the boost and the attenuation factor parameters are given as integer values * between 0 and 127, representing the range of the factor of 0 (i.e. don't apply) * to 1 (i.e. fully apply boost/attenuation gains respectively). *
The default value is 127 (fully apply boost DRC gains). *
This key is only used during decoding. */ public static final String KEY_AAC_DRC_BOOST_FACTOR = "aac-drc-boost-level"; /** * A key describing the attenuation factor allowing to adapt the dynamics of the output to the * actual listening requirements. * See {@link #KEY_AAC_DRC_BOOST_FACTOR} for a description of the role of this attenuation * factor and the value range. *
The default value is 127 (fully apply attenuation DRC gains). *
This key is only used during decoding. */ public static final String KEY_AAC_DRC_ATTENUATION_FACTOR = "aac-drc-cut-level"; /** * A key describing the selection of the heavy compression profile for DRC. * Two separate DRC gain sequences can be transmitted in one bitstream: MPEG-4 DRC light * compression, and DVB-specific heavy compression. When selecting the application of the heavy * compression, one of the sequences is selected: *
The default is 1 (heavy compression). *
This key is only used during decoding. */ public static final String KEY_AAC_DRC_HEAVY_COMPRESSION = "aac-drc-heavy-compression"; /** * A key describing the FLAC compression level to be used (FLAC audio format only). * The associated value is an integer ranging from 0 (fastest, least compression) * to 8 (slowest, most compression). */ public static final String KEY_FLAC_COMPRESSION_LEVEL = "flac-compression-level"; /** * A key describing the encoding complexity. * The associated value is an integer. These values are device and codec specific, * but lower values generally result in faster and/or less power-hungry encoding. * * @see MediaCodecInfo.EncoderCapabilities#getComplexityRange() */ public static final String KEY_COMPLEXITY = "complexity"; /** * A key describing the desired encoding quality. * The associated value is an integer. This key is only supported for encoders * that are configured in constant-quality mode. These values are device and * codec specific, but lower values generally result in more efficient * (smaller-sized) encoding. * * @see MediaCodecInfo.EncoderCapabilities#getQualityRange() */ public static final String KEY_QUALITY = "quality"; /** * A key describing the desired codec priority. *
* The associated value is an integer. Higher value means lower priority. *
* Currently, only two levels are supported:
* 0: realtime priority - meaning that the codec shall support the given
* performance configuration (e.g. framerate) at realtime. This should
* only be used by media playback, capture, and possibly by realtime
* communication scenarios if best effort performance is not suitable.
* 1: non-realtime priority (best effort).
*
* This is a hint used at codec configuration and resource planning - to understand * the realtime requirements of the application; however, due to the nature of * media components, performance is not guaranteed. * */ public static final String KEY_PRIORITY = "priority"; /** * A key describing the desired operating frame rate for video or sample rate for audio * that the codec will need to operate at. *
* The associated value is an integer or a float representing frames-per-second or * samples-per-second *
* This is used for cases like high-speed/slow-motion video capture, where the video encoder * format contains the target playback rate (e.g. 30fps), but the component must be able to * handle the high operating capture rate (e.g. 240fps). *
* This rate will be used by codec for resource planning and setting the operating points. * */ public static final String KEY_OPERATING_RATE = "operating-rate"; /** * A key describing the desired profile to be used by an encoder. * The associated value is an integer. * Constants are declared in {@link MediaCodecInfo.CodecProfileLevel}. * This key is used as a hint, and is only supported for codecs * that specify a profile. Note: Codecs are free to use all the available * coding tools at the specified profile. * * @see MediaCodecInfo.CodecCapabilities#profileLevels */ public static final String KEY_PROFILE = "profile"; /** * A key describing the desired profile to be used by an encoder. * The associated value is an integer. * Constants are declared in {@link MediaCodecInfo.CodecProfileLevel}. * This key is used as a further hint when specifying a desired profile, * and is only supported for codecs that specify a level. *
* This key is ignored if the {@link #KEY_PROFILE profile} is not specified. * * @see MediaCodecInfo.CodecCapabilities#profileLevels */ public static final String KEY_LEVEL = "level"; /** * An optional key describing the desired encoder latency in frames. This is an optional * parameter that applies only to video encoders. If encoder supports it, it should ouput * at least one output frame after being queued the specified number of frames. This key * is ignored if the video encoder does not support the latency feature. Use the output * format to verify that this feature was enabled and the actual value used by the encoder. *
* If the key is not specified, the default latency will be implenmentation specific. * The associated value is an integer. */ public static final String KEY_LATENCY = "latency"; /** * An optional key describing the maximum number of non-display-order coded frames. * This is an optional parameter that applies only to video encoders. Application should * check the value for this key in the output format to see if codec will produce * non-display-order coded frames. If encoder supports it, the output frames' order will be * different from the display order and each frame's display order could be retrived from * {@link MediaCodec.BufferInfo#presentationTimeUs}. Before API level 27, application may * receive non-display-order coded frames even though the application did not request it. * Note: Application should not rearrange the frames to display order before feeding them * to {@link MediaMuxer#writeSampleData}. *
* The default value is 0. */ public static final String KEY_OUTPUT_REORDER_DEPTH = "output-reorder-depth"; /** * A key describing the desired clockwise rotation on an output surface. * This key is only used when the codec is configured using an output surface. * The associated value is an integer, representing degrees. Supported values * are 0, 90, 180 or 270. This is an optional field; if not specified, rotation * defaults to 0. * * @see MediaCodecInfo.CodecCapabilities#profileLevels */ public static final String KEY_ROTATION = "rotation-degrees"; /** * A key describing the desired bitrate mode to be used by an encoder. * Constants are declared in {@link MediaCodecInfo.CodecCapabilities}. * * @see MediaCodecInfo.EncoderCapabilities#isBitrateModeSupported(int) */ public static final String KEY_BITRATE_MODE = "bitrate-mode"; /** * A key describing the audio session ID of the AudioTrack associated * to a tunneled video codec. * The associated value is an integer. * * @see MediaCodecInfo.CodecCapabilities#FEATURE_TunneledPlayback */ public static final String KEY_AUDIO_SESSION_ID = "audio-session-id"; /** * A key for boolean AUTOSELECT behavior for the track. Tracks with AUTOSELECT=true * are considered when automatically selecting a track without specific user * choice, based on the current locale. * This is currently only used for subtitle tracks, when the user selected * 'Default' for the captioning locale. * The associated value is an integer, where non-0 means TRUE. This is an optional * field; if not specified, AUTOSELECT defaults to TRUE. */ public static final String KEY_IS_AUTOSELECT = "is-autoselect"; /** * A key for boolean DEFAULT behavior for the track. The track with DEFAULT=true is * selected in the absence of a specific user choice. * This is currently used in two scenarios: * 1) for subtitle tracks, when the user selected 'Default' for the captioning locale. * 2) for a {@link #MIMETYPE_IMAGE_ANDROID_HEIC} track, indicating the image is the * primary item in the file. * The associated value is an integer, where non-0 means TRUE. This is an optional * field; if not specified, DEFAULT is considered to be FALSE. */ public static final String KEY_IS_DEFAULT = "is-default"; /** * A key for the FORCED field for subtitle tracks. True if it is a * forced subtitle track. Forced subtitle tracks are essential for the * content and are shown even when the user turns off Captions. They * are used for example to translate foreign/alien dialogs or signs. * The associated value is an integer, where non-0 means TRUE. This is an * optional field; if not specified, FORCED defaults to FALSE. */ public static final String KEY_IS_FORCED_SUBTITLE = "is-forced-subtitle"; /** @hide */ public static final String KEY_IS_TIMED_TEXT = "is-timed-text"; // The following color aspect values must be in sync with the ones in HardwareAPI.h. /** * An optional key describing the color primaries, white point and * luminance factors for video content. * * The associated value is an integer: 0 if unspecified, or one of the * COLOR_STANDARD_ values. */ public static final String KEY_COLOR_STANDARD = "color-standard"; /** BT.709 color chromacity coordinates with KR = 0.2126, KB = 0.0722. */ public static final int COLOR_STANDARD_BT709 = 1; /** BT.601 625 color chromacity coordinates with KR = 0.299, KB = 0.114. */ public static final int COLOR_STANDARD_BT601_PAL = 2; /** BT.601 525 color chromacity coordinates with KR = 0.299, KB = 0.114. */ public static final int COLOR_STANDARD_BT601_NTSC = 4; /** BT.2020 color chromacity coordinates with KR = 0.2627, KB = 0.0593. */ public static final int COLOR_STANDARD_BT2020 = 6; /** @hide */ @IntDef({ COLOR_STANDARD_BT709, COLOR_STANDARD_BT601_PAL, COLOR_STANDARD_BT601_NTSC, COLOR_STANDARD_BT2020, }) @Retention(RetentionPolicy.SOURCE) public @interface ColorStandard {} /** * An optional key describing the opto-electronic transfer function used * for the video content. * * The associated value is an integer: 0 if unspecified, or one of the * COLOR_TRANSFER_ values. */ public static final String KEY_COLOR_TRANSFER = "color-transfer"; /** Linear transfer characteristic curve. */ public static final int COLOR_TRANSFER_LINEAR = 1; /** SMPTE 170M transfer characteristic curve used by BT.601/BT.709/BT.2020. This is the curve * used by most non-HDR video content. */ public static final int COLOR_TRANSFER_SDR_VIDEO = 3; /** SMPTE ST 2084 transfer function. This is used by some HDR video content. */ public static final int COLOR_TRANSFER_ST2084 = 6; /** ARIB STD-B67 hybrid-log-gamma transfer function. This is used by some HDR video content. */ public static final int COLOR_TRANSFER_HLG = 7; /** @hide */ @IntDef({ COLOR_TRANSFER_LINEAR, COLOR_TRANSFER_SDR_VIDEO, COLOR_TRANSFER_ST2084, COLOR_TRANSFER_HLG, }) @Retention(RetentionPolicy.SOURCE) public @interface ColorTransfer {} /** * An optional key describing the range of the component values of the video content. * * The associated value is an integer: 0 if unspecified, or one of the * COLOR_RANGE_ values. */ public static final String KEY_COLOR_RANGE = "color-range"; /** Limited range. Y component values range from 16 to 235 for 8-bit content. * Cr, Cy values range from 16 to 240 for 8-bit content. * This is the default for video content. */ public static final int COLOR_RANGE_LIMITED = 2; /** Full range. Y, Cr and Cb component values range from 0 to 255 for 8-bit content. */ public static final int COLOR_RANGE_FULL = 1; /** @hide */ @IntDef({ COLOR_RANGE_LIMITED, COLOR_RANGE_FULL, }) @Retention(RetentionPolicy.SOURCE) public @interface ColorRange {} /** * An optional key describing the static metadata of HDR (high-dynamic-range) video content. * * The associated value is a ByteBuffer. This buffer contains the raw contents of the * Static Metadata Descriptor (including the descriptor ID) of an HDMI Dynamic Range and * Mastering InfoFrame as defined by CTA-861.3. This key must be provided to video decoders * for HDR video content unless this information is contained in the bitstream and the video * decoder supports an HDR-capable profile. This key must be provided to video encoders for * HDR video content. */ public static final String KEY_HDR_STATIC_INFO = "hdr-static-info"; /** * A key describing a unique ID for the content of a media track. * *
This key is used by {@link MediaExtractor}. Some extractors provide multiple encodings * of the same track (e.g. float audio tracks for FLAC and WAV may be expressed as two * tracks via MediaExtractor: a normal PCM track for backward compatibility, and a float PCM * track for added fidelity. Similarly, Dolby Vision extractor may provide a baseline SDR * version of a DV track.) This key can be used to identify which MediaExtractor tracks refer * to the same underlying content. *
* * The associated value is an integer. */ public static final String KEY_TRACK_ID = "track-id"; /** * A key describing the system id of the conditional access system used to scramble * a media track. ** This key is set by {@link MediaExtractor} if the track is scrambled with a conditional * access system. *
* The associated value is an integer. * @hide */ public static final String KEY_CA_SYSTEM_ID = "ca-system-id"; /** * A key describing the {@link MediaCas.Session} object associated with a media track. *
* This key is set by {@link MediaExtractor} if the track is scrambled with a conditional * access system. *
* The associated value is a ByteBuffer.
* @hide
*/
public static final String KEY_CA_SESSION_ID = "ca-session-id";
/* package private */ MediaFormat(Map