| H A D | topics.py | 13 'bltin-ellipsis-object': u'\nThe Ellipsis Object\n*******************\n\nThis object is used by extended slice notation (see Slicings). It\nsupports no special operations. There is exactly one ellipsis object,\nnamed "Ellipsis" (a built-in name).\n\nIt is written as "Ellipsis". When in a subscript, it can also be\nwritten as "...", for example "seq[...]".\n',
14 'bltin-file-objects': u'\nFile Objects\n************\n\nFile objects are implemented using C\'s "stdio" package and can be\ncreated with the built-in "open()" function. File objects are also\nreturned by some other built-in functions and methods, such as\n"os.popen()" and "os.fdopen()" and the "makefile()" method of socket\nobjects. Temporary files can be created using the "tempfile" module,\nand high-level file operations such as copying, moving, and deleting\nfiles and directories can be achieved with the "shutil" module.\n\nWhen a file operation fails for an I/O-related reason, the exception\n"IOError" is raised. This includes situations where the operation is\nnot defined for some reason, like "seek()" on a tty device or writing\na file opened for reading.\n\nFiles have the following methods:\n\nfile.close()\n\n Close the file. A closed file cannot be read or written any more.\n Any operation which requires that the file be open will raise a\n "ValueError" after the file has been closed. Calling "close()"\n more than once is allowed.\n\n As of Python 2.5, you can avoid having to call this method\n explicitly if you use the "with" statement. For example, the\n following code will automatically close *f* when the "with" block\n is exited:\n\n from __future__ import with_statement # This isn\'t required in Python 2.6\n\n with open("hello.txt") as f:\n for line in f:\n print line,\n\n In older versions of Python, you would have needed to do this to\n get the same effect:\n\n f = open("hello.txt")\n try:\n for line in f:\n print line,\n finally:\n f.close()\n\n Note: Not all "file-like" types in Python support use as a\n context manager for the "with" statement. If your code is\n intended to work with any file-like object, you can use the\n function "contextlib.closing()" instead of using the object\n directly.\n\nfile.flush()\n\n Flush the internal buffer, like "stdio"\'s "fflush()". This may be\n a no-op on some file-like objects.\n\n Note: "flush()" does not necessarily write the file\'s data to\n disk. Use "flush()" followed by "os.fsync()" to ensure this\n behavior.\n\nfile.fileno()\n\n Return the integer "file descriptor" that is used by the underlying\n implementation to request I/O operations from the operating system.\n This can be useful for other, lower level interfaces that use file\n descriptors, such as the "fcntl" module or "os.read()" and friends.\n\n Note: File-like objects which do not have a real file descriptor\n should *not* provide this method!\n\nfile.isatty()\n\n Return "True" if the file is connected to a tty(-like) device, else\n "False".\n\n Note: If a file-like object is not associated with a real file,\n this method should *not* be implemented.\n\nfile.next()\n\n A file object is its own iterator, for example "iter(f)" returns\n *f* (unless *f* is closed). When a file is used as an iterator,\n typically in a "for" loop (for example, "for line in f: print\n line.strip()"), the "next()" method is called repeatedly. This\n method returns the next input line, or raises "StopIteration" when\n EOF is hit when the file is open for reading (behavior is undefined\n when the file is open for writing). In order to make a "for" loop\n the most efficient way of looping over the lines of a file (a very\n common operation), the "next()" method uses a hidden read-ahead\n buffer. As a consequence of using a read-ahead buffer, combining\n "next()" with other file methods (like "readline()") does not work\n right. However, using "seek()" to reposition the file to an\n absolute position will flush the read-ahead buffer.\n\n New in version 2.3.\n\nfile.read([size])\n\n Read at most *size* bytes from the file (less if the read hits EOF\n before obtaining *size* bytes). If the *size* argument is negative\n or omitted, read all data until EOF is reached. The bytes are\n returned as a string object. An empty string is returned when EOF\n is encountered immediately. (For certain files, like ttys, it\n makes sense to continue reading after an EOF is hit.) Note that\n this method may call the underlying C function "fread()" more than\n once in an effort to acquire as close to *size* bytes as possible.\n Also note that when in non-blocking mode, less data than was\n requested may be returned, even if no *size* parameter was given.\n\n Note: This function is simply a wrapper for the underlying\n "fread()" C function, and will behave the same in corner cases,\n such as whether the EOF value is cached.\n\nfile.readline([size])\n\n Read one entire line from the file. A trailing newline character\n is kept in the string (but may be absent when a file ends with an\n incomplete line). [6] If the *size* argument is present and non-\n negative, it is a maximum byte count (including the trailing\n newline) and an incomplete line may be returned. When *size* is not\n 0, an empty string is returned *only* when EOF is encountered\n immediately.\n\n Note: Unlike "stdio"\'s "fgets()", the returned string contains\n null characters ("\'\\0\'") if they occurred in the input.\n\nfile.readlines([sizehint])\n\n Read until EOF using "readline()" and return a list containing the\n lines thus read. If the optional *sizehint* argument is present,\n instead of reading up to EOF, whole lines totalling approximately\n *sizehint* bytes (possibly after rounding up to an internal buffer\n size) are read. Objects implementing a file-like interface may\n choose to ignore *sizehint* if it cannot be implemented, or cannot\n be implemented efficiently.\n\nfile.xreadlines()\n\n This method returns the same thing as "iter(f)".\n\n New in version 2.1.\n\n Deprecated since version 2.3: Use "for line in file" instead.\n\nfile.seek(offset[, whence])\n\n Set the file\'s current position, like "stdio"\'s "fseek()". The\n *whence* argument is optional and defaults to "os.SEEK_SET" or "0"\n (absolute file positioning); other values are "os.SEEK_CUR" or "1"\n (seek relative to the current position) and "os.SEEK_END" or "2"\n (seek relative to the file\'s end). There is no return value.\n\n For example, "f.seek(2, os.SEEK_CUR)" advances the position by two\n and "f.seek(-3, os.SEEK_END)" sets the position to the third to\n last.\n\n Note that if the file is opened for appending (mode "\'a\'" or\n "\'a+\'"), any "seek()" operations will be undone at the next write.\n If the file is only opened for writing in append mode (mode "\'a\'"),\n this method is essentially a no-op, but it remains useful for files\n opened in append mode with reading enabled (mode "\'a+\'"). If the\n file is opened in text mode (without "\'b\'"), only offsets returned\n by "tell()" are legal. Use of other offsets causes undefined\n behavior.\n\n Note that not all file objects are seekable.\n\n Changed in version 2.6: Passing float values as offset has been\n deprecated.\n\nfile.tell()\n\n Return the file\'s current position, like "stdio"\'s "ftell()".\n\n Note: On Windows, "tell()" can return illegal values (after an\n "fgets()") when reading files with Unix-style line-endings. Use\n binary mode ("\'rb\'") to circumvent this problem.\n\nfile.truncate([size])\n\n Truncate the file\'s size. If the optional *size* argument is\n present, the file is truncated to (at most) that size. The size\n defaults to the current position. The current file position is not\n changed. Note that if a specified size exceeds the file\'s current\n size, the result is platform-dependent: possibilities include that\n the file may remain unchanged, increase to the specified size as if\n zero-filled, or increase to the specified size with undefined new\n content. Availability: Windows, many Unix variants.\n\nfile.write(str)\n\n Write a string to the file. There is no return value. Due to\n buffering, the string may not actually show up in the file until\n the "flush()" or "close()" method is called.\n\nfile.writelines(sequence)\n\n Write a sequence of strings to the file. The sequence can be any\n iterable object producing strings, typically a list of strings.\n There is no return value. (The name is intended to match\n "readlines()"; "writelines()" does not add line separators.)\n\nFiles support the iterator protocol. Each iteration returns the same\nresult as "readline()", and iteration ends when the "readline()"\nmethod returns an empty string.\n\nFile objects also offer a number of other interesting attributes.\nThese are not required for file-like objects, but should be\nimplemented if they make sense for the particular object.\n\nfile.closed\n\n bool indicating the current state of the file object. This is a\n read-only attribute; the "close()" method changes the value. It may\n not be available on all file-like objects.\n\nfile.encoding\n\n The encoding that this file uses. When Unicode strings are written\n to a file, they will be converted to byte strings using this\n encoding. In addition, when the file is connected to a terminal,\n the attribute gives the encoding that the terminal is likely to use\n (that information might be incorrect if the user has misconfigured\n the terminal). The attribute is read-only and may not be present\n on all file-like objects. It may also be "None", in which case the\n file uses the system default encoding for converting Unicode\n strings.\n\n New in version 2.3.\n\nfile.errors\n\n The Unicode error handler used along with the encoding.\n\n New in version 2.6.\n\nfile.mode\n\n The I/O mode for the file. If the file was created using the\n "open()" built-in function, this will be the value of the *mode*\n parameter. This is a read-only attribute and may not be present on\n all file-like objects.\n\nfile.name\n\n If the file object was created using "open()", the name of the\n file. Otherwise, some string that indicates the source of the file\n object, of the form "<...>". This is a read-only attribute and may\n not be present on all file-like objects.\n\nfile.newlines\n\n If Python was built with *universal newlines* enabled (the default)\n this read-only attribute exists, and for files opened in universal\n newline read mode it keeps track of the types of newlines\n encountered while reading the file. The values it can take are\n "\'\\r\'", "\'\\n\'", "\'\\r\\n\'", "None" (unknown, no newlines read yet) or\n a tuple containing all the newline types seen, to indicate that\n multiple newline conventions were encountered. For files not opened\n in universal newlines read mode the value of this attribute will be\n "None".\n\nfile.softspace\n\n Boolean that indicates whether a space character needs to be\n printed before another value when using the "print" statement.\n Classes that are trying to simulate a file object should also have\n a writable "softspace" attribute, which should be initialized to\n zero. This will be automatic for most classes implemented in\n Python (care may be needed for objects that override attribute\n access); types implemented in C will have to provide a writable\n "softspace" attribute.\n\n Note: This attribute is not used to control the "print"\n statement, but to allow the implementation of "print" to keep\n track of its internal state.\n',
15 'bltin-null-object': u'\nThe Null Object\n***************\n\nThis object is returned by functions that don\'t explicitly return a\nvalue. It supports no special operations. There is exactly one null\nobject, named "None" (a built-in name).\n\nIt is written as "None".\n',
16 'bltin-type-objects': u'\nType Objects\n************\n\nType objects represent the various object types. An object\'s type is\naccessed by the built-in function "type()". There are no special\noperations on types. The standard module "types" defines names for\nall standard built-in types.\n\nTypes are written like this: "<type \'int\'>".\n',
23 'compound': u'\nCompound statements\n*******************\n\nCompound statements contain (groups of) other statements; they affect\nor control the execution of those other statements in some way. In\ngeneral, compound statements span multiple lines, although in simple\nincarnations a whole compound statement may be contained in one line.\n\nThe "if", "while" and "for" statements implement traditional control\nflow constructs. "try" specifies exception handlers and/or cleanup\ncode for a group of statements. Function and class definitions are\nalso syntactically compound statements.\n\nCompound statements consist of one or more \'clauses.\' A clause\nconsists of a header and a \'suite.\' The clause headers of a\nparticular compound statement are all at the same indentation level.\nEach clause header begins with a uniquely identifying keyword and ends\nwith a colon. A suite is a group of statements controlled by a\nclause. A suite can be one or more semicolon-separated simple\nstatements on the same line as the header, following the header\'s\ncolon, or it can be one or more indented statements on subsequent\nlines. Only the latter form of suite can contain nested compound\nstatements; the following is illegal, mostly because it wouldn\'t be\nclear to which "if" clause a following "else" clause would belong:\n\n if test1: if test2: print x\n\nAlso note that the semicolon binds tighter than the colon in this\ncontext, so that in the following example, either all or none of the\n"print" statements are executed:\n\n if x < y < z: print x; print y; print z\n\nSummarizing:\n\n compound_stmt ::= if_stmt\n | while_stmt\n | for_stmt\n | try_stmt\n | with_stmt\n | funcdef\n | classdef\n | decorated\n suite ::= stmt_list NEWLINE | NEWLINE INDENT statement+ DEDENT\n statement ::= stmt_list NEWLINE | compound_stmt\n stmt_list ::= simple_stmt (";" simple_stmt)* [";"]\n\nNote that statements always end in a "NEWLINE" possibly followed by a\n"DEDENT". Also note that optional continuation clauses always begin\nwith a keyword that cannot start a statement, thus there are no\nambiguities (the \'dangling "else"\' problem is solved in Python by\nrequiring nested "if" statements to be indented).\n\nThe formatting of the grammar rules in the following sections places\neach clause on a separate line for clarity.\n\n\nThe "if" statement\n==================\n\nThe "if" statement is used for conditional execution:\n\n if_stmt ::= "if" expression ":" suite\n ( "elif" expression ":" suite )*\n ["else" ":" suite]\n\nIt selects exactly one of the suites by evaluating the expressions one\nby one until one is found to be true (see section Boolean operations\nfor the definition of true and false); then that suite is executed\n(and no other part of the "if" statement is executed or evaluated).\nIf all expressions are false, the suite of the "else" clause, if\npresent, is executed.\n\n\nThe "while" statement\n=====================\n\nThe "while" statement is used for repeated execution as long as an\nexpression is true:\n\n while_stmt ::= "while" expression ":" suite\n ["else" ":" suite]\n\nThis repeatedly tests the expression and, if it is true, executes the\nfirst suite; if the expression is false (which may be the first time\nit is tested) the suite of the "else" clause, if present, is executed\nand the loop terminates.\n\nA "break" statement executed in the first suite terminates the loop\nwithout executing the "else" clause\'s suite. A "continue" statement\nexecuted in the first suite skips the rest of the suite and goes back\nto testing the expression.\n\n\nThe "for" statement\n===================\n\nThe "for" statement is used to iterate over the elements of a sequence\n(such as a string, tuple or list) or other iterable object:\n\n for_stmt ::= "for" target_list "in" expression_list ":" suite\n ["else" ":" suite]\n\nThe expression list is evaluated once; it should yield an iterable\nobject. An iterator is created for the result of the\n"expression_list". The suite is then executed once for each item\nprovided by the iterator, in the order of ascending indices. Each\nitem in turn is assigned to the target list using the standard rules\nfor assignments, and then the suite is executed. When the items are\nexhausted (which is immediately when the sequence is empty), the suite\nin the "else" clause, if present, is executed, and the loop\nterminates.\n\nA "break" statement executed in the first suite terminates the loop\nwithout executing the "else" clause\'s suite. A "continue" statement\nexecuted in the first suite skips the rest of the suite and continues\nwith the next item, or with the "else" clause if there was no next\nitem.\n\nThe suite may assign to the variable(s) in the target list; this does\nnot affect the next item assigned to it.\n\nThe target list is not deleted when the loop is finished, but if the\nsequence is empty, it will not have been assigned to at all by the\nloop. Hint: the built-in function "range()" returns a sequence of\nintegers suitable to emulate the effect of Pascal\'s "for i := a to b\ndo"; e.g., "range(3)" returns the list "[0, 1, 2]".\n\nNote: There is a subtlety when the sequence is being modified by the\n loop (this can only occur for mutable sequences, i.e. lists). An\n internal counter is used to keep track of which item is used next,\n and this is incremented on each iteration. When this counter has\n reached the length of the sequence the loop terminates. This means\n that if the suite deletes the current (or a previous) item from the\n sequence, the next item will be skipped (since it gets the index of\n the current item which has already been treated). Likewise, if the\n suite inserts an item in the sequence before the current item, the\n current item will be treated again the next time through the loop.\n This can lead to nasty bugs that can be avoided by making a\n temporary copy using a slice of the whole sequence, e.g.,\n\n for x in a[:]:\n if x < 0: a.remove(x)\n\n\nThe "try" statement\n===================\n\nThe "try" statement specifies exception handlers and/or cleanup code\nfor a group of statements:\n\n try_stmt ::= try1_stmt | try2_stmt\n try1_stmt ::= "try" ":" suite\n ("except" [expression [("as" | ",") identifier]] ":" suite)+\n ["else" ":" suite]\n ["finally" ":" suite]\n try2_stmt ::= "try" ":" suite\n "finally" ":" suite\n\nChanged in version 2.5: In previous versions of Python,\n"try"..."except"..."finally" did not work. "try"..."except" had to be\nnested in "try"..."finally".\n\nThe "except" clause(s) specify one or more exception handlers. When no\nexception occurs in the "try" clause, no exception handler is\nexecuted. When an exception occurs in the "try" suite, a search for an\nexception handler is started. This search inspects the except clauses\nin turn until one is found that matches the exception. An expression-\nless except clause, if present, must be last; it matches any\nexception. For an except clause with an expression, that expression\nis evaluated, and the clause matches the exception if the resulting\nobject is "compatible" with the exception. An object is compatible\nwith an exception if it is the class or a base class of the exception\nobject, or a tuple containing an item compatible with the exception.\n\nIf no except clause matches the exception, the search for an exception\nhandler continues in the surrounding code and on the invocation stack.\n[1]\n\nIf the evaluation of an expression in the header of an except clause\nraises an exception, the original search for a handler is canceled and\na search starts for the new exception in the surrounding code and on\nthe call stack (it is treated as if the entire "try" statement raised\nthe exception).\n\nWhen a matching except clause is found, the exception is assigned to\nthe target specified in that except clause, if present, and the except\nclause\'s suite is executed. All except clauses must have an\nexecutable block. When the end of this block is reached, execution\ncontinues normally after the entire try statement. (This means that\nif two nested handlers exist for the same exception, and the exception\noccurs in the try clause of the inner handler, the outer handler will\nnot handle the exception.)\n\nBefore an except clause\'s suite is executed, details about the\nexception are assigned to three variables in the "sys" module:\n"sys.exc_type" receives the object identifying the exception;\n"sys.exc_value" receives the exception\'s parameter;\n"sys.exc_traceback" receives a traceback object (see section The\nstandard type hierarchy) identifying the point in the program where\nthe exception occurred. These details are also available through the\n"sys.exc_info()" function, which returns a tuple "(exc_type,\nexc_value, exc_traceback)". Use of the corresponding variables is\ndeprecated in favor of this function, since their use is unsafe in a\nthreaded program. As of Python 1.5, the variables are restored to\ntheir previous values (before the call) when returning from a function\nthat handled an exception.\n\nThe optional "else" clause is executed if and when control flows off\nthe end of the "try" clause. [2] Exceptions in the "else" clause are\nnot handled by the preceding "except" clauses.\n\nIf "finally" is present, it specifies a \'cleanup\' handler. The "try"\nclause is executed, including any "except" and "else" clauses. If an\nexception occurs in any of the clauses and is not handled, the\nexception is temporarily saved. The "finally" clause is executed. If\nthere is a saved exception, it is re-raised at the end of the\n"finally" clause. If the "finally" clause raises another exception or\nexecutes a "return" or "break" statement, the saved exception is\ndiscarded:\n\n >>> def f():\n ... try:\n ... 1/0\n ... finally:\n ... return 42\n ...\n >>> f()\n 42\n\nThe exception information is not available to the program during\nexecution of the "finally" clause.\n\nWhen a "return", "break" or "continue" statement is executed in the\n"try" suite of a "try"..."finally" statement, the "finally" clause is\nalso executed \'on the way out.\' A "continue" statement is illegal in\nthe "finally" clause. (The reason is a problem with the current\nimplementation --- this restriction may be lifted in the future).\n\nThe return value of a function is determined by the last "return"\nstatement executed. Since the "finally" clause always executes, a\n"return" statement executed in the "finally" clause will always be the\nlast one executed:\n\n >>> def foo():\n ... try:\n ... return \'try\'\n ... finally:\n ... return \'finally\'\n ...\n >>> foo()\n \'finally\'\n\nAdditional information on exceptions can be found in section\nExceptions, and information on using the "raise" statement to generate\nexceptions may be found in section The raise statement.\n\n\nThe "with" statement\n====================\n\nNew in version 2.5.\n\nThe "with" statement is used to wrap the execution of a block with\nmethods defined by a context manager (see section With Statement\nContext Managers). This allows common "try"..."except"..."finally"\nusage patterns to be encapsulated for convenient reuse.\n\n with_stmt ::= "with" with_item ("," with_item)* ":" suite\n with_item ::= expression ["as" target]\n\nThe execution of the "with" statement with one "item" proceeds as\nfollows:\n\n1. The context expression (the expression given in the "with_item")\n is evaluated to obtain a context manager.\n\n2. The context manager\'s "__exit__()" is loaded for later use.\n\n3. The context manager\'s "__enter__()" method is invoked.\n\n4. If a target was included in the "with" statement, the return\n value from "__enter__()" is assigned to it.\n\n Note: The "with" statement guarantees that if the "__enter__()"\n method returns without an error, then "__exit__()" will always be\n called. Thus, if an error occurs during the assignment to the\n target list, it will be treated the same as an error occurring\n within the suite would be. See step 6 below.\n\n5. The suite is executed.\n\n6. The context manager\'s "__exit__()" method is invoked. If an\n exception caused the suite to be exited, its type, value, and\n traceback are passed as arguments to "__exit__()". Otherwise, three\n "None" arguments are supplied.\n\n If the suite was exited due to an exception, and the return value\n from the "__exit__()" method was false, the exception is reraised.\n If the return value was true, the exception is suppressed, and\n execution continues with the statement following the "with"\n statement.\n\n If the suite was exited for any reason other than an exception, the\n return value from "__exit__()" is ignored, and execution proceeds\n at the normal location for the kind of exit that was taken.\n\nWith more than one item, the context managers are processed as if\nmultiple "with" statements were nested:\n\n with A() as a, B() as b:\n suite\n\nis equivalent to\n\n with A() as a:\n with B() as b:\n suite\n\nNote: In Python 2.5, the "with" statement is only allowed when the\n "with_statement" feature has been enabled. It is always enabled in\n Python 2.6.\n\nChanged in version 2.7: Support for multiple context expressions.\n\nSee also:\n\n **PEP 343** - The "with" statement\n The specification, background, and examples for the Python "with"\n statement.\n\n\nFunction definitions\n====================\n\nA function definition defines a user-defined function object (see\nsection The standard type hierarchy):\n\n decorated ::= decorators (classdef | funcdef)\n decorators ::= decorator+\n decorator ::= "@" dotted_name ["(" [argument_list [","]] ")"] NEWLINE\n funcdef ::= "def" funcname "(" [parameter_list] ")" ":" suite\n dotted_name ::= identifier ("." identifier)*\n parameter_list ::= (defparameter ",")*\n ( "*" identifier ["," "**" identifier]\n | "**" identifier\n | defparameter [","] )\n defparameter ::= parameter ["=" expression]\n sublist ::= parameter ("," parameter)* [","]\n parameter ::= identifier | "(" sublist ")"\n funcname ::= identifier\n\nA function definition is an executable statement. Its execution binds\nthe function name in the current local namespace to a function object\n(a wrapper around the executable code for the function). This\nfunction object contains a reference to the current global namespace\nas the global namespace to be used when the function is called.\n\nThe function definition does not execute the function body; this gets\nexecuted only when the function is called. [3]\n\nA function definition may be wrapped by one or more *decorator*\nexpressions. Decorator expressions are evaluated when the function is\ndefined, in the scope that contains the function definition. The\nresult must be a callable, which is invoked with the function object\nas the only argument. The returned value is bound to the function name\ninstead of the function object. Multiple decorators are applied in\nnested fashion. For example, the following code:\n\n @f1(arg)\n @f2\n def func(): pass\n\nis equivalent to:\n\n def func(): pass\n func = f1(arg)(f2(func))\n\nWhen one or more top-level *parameters* have the form *parameter* "="\n*expression*, the function is said to have "default parameter values."\nFor a parameter with a default value, the corresponding *argument* may\nbe omitted from a call, in which case the parameter\'s default value is\nsubstituted. If a parameter has a default value, all following\nparameters must also have a default value --- this is a syntactic\nrestriction that is not expressed by the grammar.\n\n**Default parameter values are evaluated when the function definition\nis executed.** This means that the expression is evaluated once, when\nthe function is defined, and that the same "pre-computed" value is\nused for each call. This is especially important to understand when a\ndefault parameter is a mutable object, such as a list or a dictionary:\nif the function modifies the object (e.g. by appending an item to a\nlist), the default value is in effect modified. This is generally not\nwhat was intended. A way around this is to use "None" as the\ndefault, and explicitly test for it in the body of the function, e.g.:\n\n def whats_on_the_telly(penguin=None):\n if penguin is None:\n penguin = []\n penguin.append("property of the zoo")\n return penguin\n\nFunction call semantics are described in more detail in section Calls.\nA function call always assigns values to all parameters mentioned in\nthe parameter list, either from position arguments, from keyword\narguments, or from default values. If the form ""*identifier"" is\npresent, it is initialized to a tuple receiving any excess positional\nparameters, defaulting to the empty tuple. If the form\n""**identifier"" is present, it is initialized to a new dictionary\nreceiving any excess keyword arguments, defaulting to a new empty\ndictionary.\n\nIt is also possible to create anonymous functions (functions not bound\nto a name), for immediate use in expressions. This uses lambda\nexpressions, described in section Lambdas. Note that the lambda\nexpression is merely a shorthand for a simplified function definition;\na function defined in a ""def"" statement can be passed around or\nassigned to another name just like a function defined by a lambda\nexpression. The ""def"" form is actually more powerful since it\nallows the execution of multiple statements.\n\n**Programmer\'s note:** Functions are first-class objects. A ""def""\nform executed inside a function definition defines a local function\nthat can be returned or passed around. Free variables used in the\nnested function can access the local variables of the function\ncontaining the def. See section Naming and binding for details.\n\n\nClass definitions\n=================\n\nA class definition defines a class object (see section The standard\ntype hierarchy):\n\n classdef ::= "class" classname [inheritance] ":" suite\n inheritance ::= "(" [expression_list] ")"\n classname ::= identifier\n\nA class definition is an executable statement. It first evaluates the\ninheritance list, if present. Each item in the inheritance list\nshould evaluate to a class object or class type which allows\nsubclassing. The class\'s suite is then executed in a new execution\nframe (see section Naming and binding), using a newly created local\nnamespace and the original global namespace. (Usually, the suite\ncontains only function definitions.) When the class\'s suite finishes\nexecution, its execution frame is discarded but its local namespace is\nsaved. [4] A class object is then created using the inheritance list\nfor the base classes and the saved local namespace for the attribute\ndictionary. The class name is bound to this class object in the\noriginal local namespace.\n\n**Programmer\'s note:** Variables defined in the class definition are\nclass variables; they are shared by all instances. To create instance\nvariables, they can be set in a method with "self.name = value". Both\nclass and instance variables are accessible through the notation\n""self.name"", and an instance variable hides a class variable with\nthe same name when accessed in this way. Class variables can be used\nas defaults for instance variables, but using mutable values there can\nlead to unexpected results. For *new-style class*es, descriptors can\nbe used to create instance variables with different implementation\ndetails.\n\nClass definitions, like function definitions, may be wrapped by one or\nmore *decorator* expressions. The evaluation rules for the decorator\nexpressions are the same as for functions. The result must be a class\nobject, which is then bound to the class name.\n\n-[ Footnotes ]-\n\n[1] The exception is propagated to the invocation stack unless\n there is a "finally" clause which happens to raise another\n exception. That new exception causes the old one to be lost.\n\n[2] Currently, control "flows off the end" except in the case of\n an exception or the execution of a "return", "continue", or\n "break" statement.\n\n[3] A string literal appearing as the first statement in the\n function body is transformed into the function\'s "__doc__"\n attribute and therefore the function\'s *docstring*.\n\n[4] A string literal appearing as the first statement in the class\n body is transformed into the namespace\'s "__doc__" item and\n therefore the class\'s *docstring*.\n',
27 'customization': u'\nBasic customization\n*******************\n\nobject.__new__(cls[, ...])\n\n Called to create a new instance of class *cls*. "__new__()" is a\n static method (special-cased so you need not declare it as such)\n that takes the class of which an instance was requested as its\n first argument. The remaining arguments are those passed to the\n object constructor expression (the call to the class). The return\n value of "__new__()" should be the new object instance (usually an\n instance of *cls*).\n\n Typical implementations create a new instance of the class by\n invoking the superclass\'s "__new__()" method using\n "super(currentclass, cls).__new__(cls[, ...])" with appropriate\n arguments and then modifying the newly-created instance as\n necessary before returning it.\n\n If "__new__()" returns an instance of *cls*, then the new\n instance\'s "__init__()" method will be invoked like\n "__init__(self[, ...])", where *self* is the new instance and the\n remaining arguments are the same as were passed to "__new__()".\n\n If "__new__()" does not return an instance of *cls*, then the new\n instance\'s "__init__()" method will not be invoked.\n\n "__new__()" is intended mainly to allow subclasses of immutable\n types (like int, str, or tuple) to customize instance creation. It\n is also commonly overridden in custom metaclasses in order to\n customize class creation.\n\nobject.__init__(self[, ...])\n\n Called after the instance has been created (by "__new__()"), but\n before it is returned to the caller. The arguments are those\n passed to the class constructor expression. If a base class has an\n "__init__()" method, the derived class\'s "__init__()" method, if\n any, must explicitly call it to ensure proper initialization of the\n base class part of the instance; for example:\n "BaseClass.__init__(self, [args...])".\n\n Because "__new__()" and "__init__()" work together in constructing\n objects ("__new__()" to create it, and "__init__()" to customise\n it), no non-"None" value may be returned by "__init__()"; doing so\n will cause a "TypeError" to be raised at runtime.\n\nobject.__del__(self)\n\n Called when the instance is about to be destroyed. This is also\n called a destructor. If a base class has a "__del__()" method, the\n derived class\'s "__del__()" method, if any, must explicitly call it\n to ensure proper deletion of the base class part of the instance.\n Note that it is possible (though not recommended!) for the\n "__del__()" method to postpone destruction of the instance by\n creating a new reference to it. It may then be called at a later\n time when this new reference is deleted. It is not guaranteed that\n "__del__()" methods are called for objects that still exist when\n the interpreter exits.\n\n Note: "del x" doesn\'t directly call "x.__del__()" --- the former\n decrements the reference count for "x" by one, and the latter is\n only called when "x"\'s reference count reaches zero. Some common\n situations that may prevent the reference count of an object from\n going to zero include: circular references between objects (e.g.,\n a doubly-linked list or a tree data structure with parent and\n child pointers); a reference to the object on the stack frame of\n a function that caught an exception (the traceback stored in\n "sys.exc_traceback" keeps the stack frame alive); or a reference\n to the object on the stack frame that raised an unhandled\n exception in interactive mode (the traceback stored in\n "sys.last_traceback" keeps the stack frame alive). The first\n situation can only be remedied by explicitly breaking the cycles;\n the latter two situations can be resolved by storing "None" in\n "sys.exc_traceback" or "sys.last_traceback". Circular references\n which are garbage are detected when the option cycle detector is\n enabled (it\'s on by default), but can only be cleaned up if there\n are no Python-level "__del__()" methods involved. Refer to the\n documentation for the "gc" module for more information about how\n "__del__()" methods are handled by the cycle detector,\n particularly the description of the "garbage" value.\n\n Warning: Due to the precarious circumstances under which\n "__del__()" methods are invoked, exceptions that occur during\n their execution are ignored, and a warning is printed to\n "sys.stderr" instead. Also, when "__del__()" is invoked in\n response to a module being deleted (e.g., when execution of the\n program is done), other globals referenced by the "__del__()"\n method may already have been deleted or in the process of being\n torn down (e.g. the import machinery shutting down). For this\n reason, "__del__()" methods should do the absolute minimum needed\n to maintain external invariants. Starting with version 1.5,\n Python guarantees that globals whose name begins with a single\n underscore are deleted from their module before other globals are\n deleted; if no other references to such globals exist, this may\n help in assuring that imported modules are still available at the\n time when the "__del__()" method is called.\n\n See also the "-R" command-line option.\n\nobject.__repr__(self)\n\n Called by the "repr()" built-in function and by string conversions\n (reverse quotes) to compute the "official" string representation of\n an object. If at all possible, this should look like a valid\n Python expression that could be used to recreate an object with the\n same value (given an appropriate environment). If this is not\n possible, a string of the form "<...some useful description...>"\n should be returned. The return value must be a string object. If a\n class defines "__repr__()" but not "__str__()", then "__repr__()"\n is also used when an "informal" string representation of instances\n of that class is required.\n\n This is typically used for debugging, so it is important that the\n representation is information-rich and unambiguous.\n\nobject.__str__(self)\n\n Called by the "str()" built-in function and by the "print"\n statement to compute the "informal" string representation of an\n object. This differs from "__repr__()" in that it does not have to\n be a valid Python expression: a more convenient or concise\n representation may be used instead. The return value must be a\n string object.\n\nobject.__lt__(self, other)\nobject.__le__(self, other)\nobject.__eq__(self, other)\nobject.__ne__(self, other)\nobject.__gt__(self, other)\nobject.__ge__(self, other)\n\n New in version 2.1.\n\n These are the so-called "rich comparison" methods, and are called\n for comparison operators in preference to "__cmp__()" below. The\n correspondence between operator symbols and method names is as\n follows: "x<y" calls "x.__lt__(y)", "x<=y" calls "x.__le__(y)",\n "x==y" calls "x.__eq__(y)", "x!=y" and "x<>y" call "x.__ne__(y)",\n "x>y" calls "x.__gt__(y)", and "x>=y" calls "x.__ge__(y)".\n\n A rich comparison method may return the singleton "NotImplemented"\n if it does not implement the operation for a given pair of\n arguments. By convention, "False" and "True" are returned for a\n successful comparison. However, these methods can return any value,\n so if the comparison operator is used in a Boolean context (e.g.,\n in the condition of an "if" statement), Python will call "bool()"\n on the value to determine if the result is true or false.\n\n There are no implied relationships among the comparison operators.\n The truth of "x==y" does not imply that "x!=y" is false.\n Accordingly, when defining "__eq__()", one should also define\n "__ne__()" so that the operators will behave as expected. See the\n paragraph on "__hash__()" for some important notes on creating\n *hashable* objects which support custom comparison operations and\n are usable as dictionary keys.\n\n There are no swapped-argument versions of these methods (to be used\n when the left argument does not support the operation but the right\n argument does); rather, "__lt__()" and "__gt__()" are each other\'s\n reflection, "__le__()" and "__ge__()" are each other\'s reflection,\n and "__eq__()" and "__ne__()" are their own reflection.\n\n Arguments to rich comparison methods are never coerced.\n\n To automatically generate ordering operations from a single root\n operation, see "functools.total_ordering()".\n\nobject.__cmp__(self, other)\n\n Called by comparison operations if rich comparison (see above) is\n not defined. Should return a negative integer if "self < other",\n zero if "self == other", a positive integer if "self > other". If\n no "__cmp__()", "__eq__()" or "__ne__()" operation is defined,\n class instances are compared by object identity ("address"). See\n also the description of "__hash__()" for some important notes on\n creating *hashable* objects which support custom comparison\n operations and are usable as dictionary keys. (Note: the\n restriction that exceptions are not propagated by "__cmp__()" has\n been removed since Python 1.5.)\n\nobject.__rcmp__(self, other)\n\n Changed in version 2.1: No longer supported.\n\nobject.__hash__(self)\n\n Called by built-in function "hash()" and for operations on members\n of hashed collections including "set", "frozenset", and "dict".\n "__hash__()" should return an integer. The only required property\n is that objects which compare equal have the same hash value; it is\n advised to somehow mix together (e.g. using exclusive or) the hash\n values for the components of the object that also play a part in\n comparison of objects.\n\n If a class does not define a "__cmp__()" or "__eq__()" method it\n should not define a "__hash__()" operation either; if it defines\n "__cmp__()" or "__eq__()" but not "__hash__()", its instances will\n not be usable in hashed collections. If a class defines mutable\n objects and implements a "__cmp__()" or "__eq__()" method, it\n should not implement "__hash__()", since hashable collection\n implementations require that an object\'s hash value is immutable\n (if the object\'s hash value changes, it will be in the wrong hash\n bucket).\n\n User-defined classes have "__cmp__()" and "__hash__()" methods by\n default; with them, all objects compare unequal (except with\n themselves) and "x.__hash__()" returns a result derived from\n "id(x)".\n\n Classes which inherit a "__hash__()" method from a parent class but\n change the meaning of "__cmp__()" or "__eq__()" such that the hash\n value returned is no longer appropriate (e.g. by switching to a\n value-based concept of equality instead of the default identity\n based equality) can explicitly flag themselves as being unhashable\n by setting "__hash__ = None" in the class definition. Doing so\n means that not only will instances of the class raise an\n appropriate "TypeError" when a program attempts to retrieve their\n hash value, but they will also be correctly identified as\n unhashable when checking "isinstance(obj, collections.Hashable)"\n (unlike classes which define their own "__hash__()" to explicitly\n raise "TypeError").\n\n Changed in version 2.5: "__hash__()" may now also return a long\n integer object; the 32-bit integer is then derived from the hash of\n that object.\n\n Changed in version 2.6: "__hash__" may now be set to "None" to\n explicitly flag instances of a class as unhashable.\n\nobject.__nonzero__(self)\n\n Called to implement truth value testing and the built-in operation\n "bool()"; should return "False" or "True", or their integer\n equivalents "0" or "1". When this method is not defined,\n "__len__()" is called, if it is defined, and the object is\n considered true if its result is nonzero. If a class defines\n neither "__len__()" nor "__nonzero__()", all its instances are\n considered true.\n\nobject.__unicode__(self)\n\n Called to implement "unicode()" built-in; should return a Unicode\n object. When this method is not defined, string conversion is\n attempted, and the result of string conversion is converted to\n Unicode using the system default encoding.\n', namespace
38 'for': u'\nThe "for" statement\n*******************\n\nThe "for" statement is used to iterate over the elements of a sequence\n(such as a string, tuple or list) or other iterable object:\n\n for_stmt ::= "for" target_list "in" expression_list ":" suite\n ["else" ":" suite]\n\nThe expression list is evaluated once; it should yield an iterable\nobject. An iterator is created for the result of the\n"expression_list". The suite is then executed once for each item\nprovided by the iterator, in the order of ascending indices. Each\nitem in turn is assigned to the target list using the standard rules\nfor assignments, and then the suite is executed. When the items are\nexhausted (which is immediately when the sequence is empty), the suite\nin the "else" clause, if present, is executed, and the loop\nterminates.\n\nA "break" statement executed in the first suite terminates the loop\nwithout executing the "else" clause\'s suite. A "continue" statement\nexecuted in the first suite skips the rest of the suite and continues\nwith the next item, or with the "else" clause if there was no next\nitem.\n\nThe suite may assign to the variable(s) in the target list; this does\nnot affect the next item assigned to it.\n\nThe target list is not deleted when the loop is finished, but if the\nsequence is empty, it will not have been assigned to at all by the\nloop. Hint: the built-in function "range()" returns a sequence of\nintegers suitable to emulate the effect of Pascal\'s "for i := a to b\ndo"; e.g., "range(3)" returns the list "[0, 1, 2]".\n\nNote: There i
[all...] |