Searched refs:exponent (Results 1 - 25 of 26) sorted by relevance

12

/device/linaro/bootloader/edk2/StdLib/LibC/Main/Arm/
H A Dfloatunsidf.c61 const int exponent = (aWidth - 1) - __builtin_clz(a); local
65 const int shift = significandBits - exponent;
68 // Insert the exponent
69 result += (rep_t)(exponent + exponentBias) << significandBits;
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.2/Lib/test/
H A Dtest_strtod.py22 (?:E(?P<exp>[-+]?\d+))? # and an optional exponent
49 # compute exponent e for result; may be one too small in the case
129 digits, exponent = n, e
131 s = '{}e{}'.format(digits, exponent)
134 s = '{}e{}'.format(digits * 10**40, exponent - 40)
140 digits, exponent = n, e
142 s = '{}e{}'.format(digits, exponent)
145 s = '{}e{}'.format(digits * 10**40, exponent - 40)
148 exponent -= 1
168 exponent
[all...]
/device/linaro/bootloader/edk2/StdLib/BsdSocketLib/
H A Dres_debug.c574 int mantissa, exponent; local
577 exponent = (int)((prec >> 0) & 0x0f) % 10;
579 val = mantissa * poweroften[exponent];
594 int exponent; local
613 for (exponent = 0; exponent < 9; exponent++)
614 if (cmval < poweroften[exponent+1])
617 mantissa = cmval / poweroften[exponent];
621 retval = (u_int8_t)((mantissa << 4) | exponent);
[all...]
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.10/Lib/
H A Dnumbers.py137 def __pow__(self, exponent):
138 """self**exponent; should promote to float or complex when necessary."""
310 def __pow__(self, exponent, modulus=None):
311 """self ** exponent % modulus, but maybe faster.
314 3-argument version of pow(). Raise a TypeError if exponent < 0
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.2/Lib/
H A Dnumbers.py137 def __pow__(self, exponent):
138 """self**exponent; should promote to float or complex when necessary."""
310 def __pow__(self, exponent, modulus=None):
311 """self ** exponent % modulus, but maybe faster.
314 3-argument version of pow(). Raise a TypeError if exponent < 0
H A Ddecimal.py145 DecimalTuple = _namedtuple('DecimalTuple', 'sign digits exponent')
187 This occurs and signals clamped if the exponent of a result has been
189 representation. This may occur when the exponent of a zero result would
191 number would have an encoded exponent that cannot be represented. In
192 this latter case, the exponent is reduced to fit and the corresponding
315 operation is subnormal (that is, its adjusted exponent is less than
325 This occurs and signals overflow if the adjusted exponent of a result
364 adjusted exponent of the result would be smaller (more negative) than
369 necessary, so that its exponent is not less than Etiny. This may result
370 in 0 with the sign of the intermediate result and an exponent o
[all...]
/device/google/contexthub/util/common/
H A DJSONObject.cpp322 int32_t exponent; local
323 if (parseInt32(&data[firstExpDigitOffset], numExpDigits, &exponent) != 0) {
328 exponent = -exponent;
332 x += (float)fraction * powf(10.0f, exponent - (int32_t)numFracDigits);
/device/google/contexthub/util/nanoapp_sign/
H A Dnanoapp_sign.c119 uint32_t exponent[RSA_LIMBS]; member in struct:RsaData
384 rsaResult = rsaPrivOp(&rsa->state, rsa->num, rsa->exponent, rsa->modulus);
503 if (!readFile(rsa.exponent, sizeof(rsa.exponent), keyPvtFile))
507 printHashRev(stderr, "RSA exponent", rsa.exponent, RSA_LIMBS);
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.10/Objects/
H A Dcomplexobject.c657 Py_complex exponent; local
668 exponent = b;
669 int_exponent = (long)exponent.real;
670 if (exponent.imag == 0. && exponent.real == int_exponent)
673 p = c_pow(a,exponent);
H A Dfloatobject.c92 {"radix", "FLT_RADIX -- radix of exponent"},
463 int exponent; local
508 (void) frexp(i, &exponent);
509 /* exponent is the # of bits in v before the radix point;
512 if (exponent < 0 || (size_t)exponent < nbits) {
517 if ((size_t)exponent > nbits) {
1196 /* copy buf to mybuf, adding exponent, sign and leading 0 */
1454 * The limit is chosen to ensure that, writing exp for the exponent,
1565 /* [p <exponent>] */
1705 int exponent; local
[all...]
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.2/Objects/
H A Dcomplexobject.c653 Py_complex exponent; local
664 exponent = b;
665 int_exponent = (long)exponent.real;
666 if (exponent.imag == 0. && exponent.real == int_exponent)
669 p = c_pow(a,exponent);
H A Dfloatobject.c92 {"radix", "FLT_RADIX -- radix of exponent"},
462 int exponent; local
507 (void) frexp(i, &exponent);
508 /* exponent is the # of bits in v before the radix point;
511 if (exponent < 0 || (size_t)exponent < nbits) {
516 if ((size_t)exponent > nbits) {
1183 /* copy buf to mybuf, adding exponent, sign and leading 0 */
1439 * The limit is chosen to ensure that, writing exp for the exponent,
1550 /* [p <exponent>] */
1690 int exponent; local
[all...]
H A Dlongobject.c32 * unless the exponent contains more than FIVEARY_CUTOFF digits.
2202 If a == 0, return 0.0 and set *e = 0. If the resulting exponent
2227 /* Special case for 0: significand 0.0, exponent 0. */
2317 /* exponent > PY_SSIZE_T_MAX */
2330 Py_ssize_t exponent; local
2337 x = _PyLong_Frexp((PyLongObject *)v, &exponent);
2338 if ((x == -1.0 && PyErr_Occurred()) || exponent > DBL_MAX_EXP) {
2343 return ldexp(x, (int)exponent);
3403 /* 5-ary values. If the exponent is large enough, table is
3429 if (Py_SIZE(b) < 0) { /* if exponent i
[all...]
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.2/Parser/
H A Dtokenizer.c1466 goto exponent;
1497 exponent:
/device/linaro/bootloader/edk2/SecurityPkg/Library/Tpm2CommandLib/
H A DTpm2Capability.c734 WriteUnaligned32 ((UINT32 *)Buffer, SwapBytes32 (Parameters->parameters.rsaDetail.exponent));
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.10/Parser/
H A Dtokenizer.c1486 goto exponent;
1518 exponent:
/device/linaro/bootloader/edk2/AppPkg/Applications/Enquire/
H A DEnquire.c507 Fixed exponent(): thanks Christophe BINOT
665 #define D_FLT_RADIX "Radix of exponent representation"
721 int exponent ARGS((Long_double x, Long_double *fract, int *exp));
1345 exponent(Long_double x, Long_double *fract, int *exp) function
2706 if (!exponent((Long_double)val, &rem, &e)) {
3008 /* Size of and minimum normalised exponent ************************/
3055 Vprintf("%sNumber of bits used for exponent = %d%s\n", co, iexp, oc);
3056 Vprintf("%sMinimum normalised exponent = %d%s\n", co, f_min_exp-1, oc);
3096 /* Minimum exponent ************************************************/
3125 /* Maximum exponent ************************************************/
[all...]
/device/generic/goldfish-opengl/system/include/GLES/
H A Dglext.h832 GL_API GLbitfield GL_APIENTRY glQueryMatrixxOES (GLfixed mantissa[16], GLint exponent[16]);
834 typedef GLbitfield (GL_APIENTRYP PFNGLQUERYMATRIXXOESPROC) (GLfixed mantissa[16], GLint exponent[16]);
/device/generic/goldfish-opengl/tests/gles_android_wrapper/
H A Dgles.cpp1151 GLbitfield glQueryMatrixxOES(GLfixed mantissa[16], GLint exponent[16]) argument
1153 return getDispatch()->glQueryMatrixxOES(mantissa, exponent);
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/PyMod-2.7.2/Objects/
H A Dlongobject.c32 * unless the exponent contains more than FIVEARY_CUTOFF digits.
2202 If a == 0, return 0.0 and set *e = 0. If the resulting exponent
2227 /* Special case for 0: significand 0.0, exponent 0. */
2317 /* exponent > PY_SSIZE_T_MAX */
2330 Py_ssize_t exponent; local
2337 x = _PyLong_Frexp((PyLongObject *)v, &exponent);
2338 if ((x == -1.0 && PyErr_Occurred()) || exponent > DBL_MAX_EXP) {
2343 return ldexp(x, (int)exponent);
3403 /* 5-ary values. If the exponent is large enough, table is
3429 if (Py_SIZE(b) < 0) { /* if exponent i
[all...]
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.10/PyMod-2.7.10/Objects/
H A Dlongobject.c32 * unless the exponent contains more than FIVEARY_CUTOFF digits.
2216 If a == 0, return 0.0 and set *e = 0. If the resulting exponent
2241 /* Special case for 0: significand 0.0, exponent 0. */
2331 /* exponent > PY_SSIZE_T_MAX */
2344 Py_ssize_t exponent; local
2351 x = _PyLong_Frexp((PyLongObject *)v, &exponent);
2352 if ((x == -1.0 && PyErr_Occurred()) || exponent > DBL_MAX_EXP) {
2357 return ldexp(x, (int)exponent);
3417 /* 5-ary values. If the exponent is large enough, table is
3443 if (Py_SIZE(b) < 0) { /* if exponent i
[all...]
/device/linaro/bootloader/edk2/StdLib/LibC/Stdio/
H A Dvfwprintf.c573 static int exponent(CHAR_T *, int, int);
638 * D: expchar holds this character; '\0' if no exponent, e.g. %f
654 int expt = 0; /* integer value of exponent */
655 char expchar; /* exponent character: [eEpP\0] */
659 CHAR_T expstr[MAXEXPDIG+2]; /* buffer for exponent string: e+ZZZ */
1255 expsize = exponent(expstr, expt - 1, expchar);
1256 size = expsize + prec + 1; /* Leading digit + exponent string + precision */
2019 exponent(CHAR_T *p0, int expo, int fmtch) function
/device/generic/goldfish-opengl/system/GLESv1_enc/
H A Dgl_entry.cpp246 GLbitfield glQueryMatrixxOES(GLfixed* mantissa, GLint* exponent);
1743 GLbitfield glQueryMatrixxOES(GLfixed* mantissa, GLint* exponent) argument
1746 return ctx->glQueryMatrixxOES(ctx, mantissa, exponent);
/device/linaro/bootloader/edk2/MdePkg/Include/IndustryStandard/
H A DTpm20.h1593 UINT32 exponent; member in struct:__anon8707
/device/linaro/bootloader/edk2/AppPkg/Applications/Python/Python-2.7.2/Lib/pydoc_data/
H A Dtopics.py37 'floating': u'\nFloating point literals\n***********************\n\nFloating point literals are described by the following lexical\ndefinitions:\n\n floatnumber ::= pointfloat | exponentfloat\n pointfloat ::= [intpart] fraction | intpart "."\n exponentfloat ::= (intpart | pointfloat) exponent\n intpart ::= digit+\n fraction ::= "." digit+\n exponent ::= ("e" | "E") ["+" | "-"] digit+\n\nNote that the integer and exponent parts of floating point numbers can\nlook like octal integers, but are interpreted using radix 10. For\nexample, ``077e010`` is legal, and denotes the same number as\n``77e10``. The allowed range of floating point literals is\nimplementation-dependent. Some examples of floating point literals:\n\n 3.14 10. .001 1e100 3.14e-10 0e0\n\nNote that numeric literals do not include a sign; a phrase like ``-1``\nis actually an expression composed of the unary operator ``-`` and the\nliteral ``1``.\n',
39 'formatstrings': u'\nFormat String Syntax\n********************\n\nThe ``str.format()`` method and the ``Formatter`` class share the same\nsyntax for format strings (although in the case of ``Formatter``,\nsubclasses can define their own format string syntax).\n\nFormat strings contain "replacement fields" surrounded by curly braces\n``{}``. Anything that is not contained in braces is considered literal\ntext, which is copied unchanged to the output. If you need to include\na brace character in the literal text, it can be escaped by doubling:\n``{{`` and ``}}``.\n\nThe grammar for a replacement field is as follows:\n\n replacement_field ::= "{" [field_name] ["!" conversion] [":" format_spec] "}"\n field_name ::= arg_name ("." attribute_name | "[" element_index "]")*\n arg_name ::= [identifier | integer]\n attribute_name ::= identifier\n element_index ::= integer | index_string\n index_string ::= <any source character except "]"> +\n conversion ::= "r" | "s"\n format_spec ::= <described in the next section>\n\nIn less formal terms, the replacement field can start with a\n*field_name* that specifies the object whose value is to be formatted\nand inserted into the output instead of the replacement field. The\n*field_name* is optionally followed by a *conversion* field, which is\npreceded by an exclamation point ``\'!\'``, and a *format_spec*, which\nis preceded by a colon ``\':\'``. These specify a non-default format\nfor the replacement value.\n\nSee also the *Format Specification Mini-Language* section.\n\nThe *field_name* itself begins with an *arg_name* that is either\neither a number or a keyword. If it\'s a number, it refers to a\npositional argument, and if it\'s a keyword, it refers to a named\nkeyword argument. If the numerical arg_names in a format string are\n0, 1, 2, ... in sequence, they can all be omitted (not just some) and\nthe numbers 0, 1, 2, ... will be automatically inserted in that order.\nThe *arg_name* can be followed by any number of index or attribute\nexpressions. An expression of the form ``\'.name\'`` selects the named\nattribute using ``getattr()``, while an expression of the form\n``\'[index]\'`` does an index lookup using ``__getitem__()``.\n\nChanged in version 2.7: The positional argument specifiers can be\nomitted, so ``\'{} {}\'`` is equivalent to ``\'{0} {1}\'``.\n\nSome simple format string examples:\n\n "First, thou shalt count to {0}" # References first positional argument\n "Bring me a {}" # Implicitly references the first positional argument\n "From {} to {}" # Same as "From {0} to {1}"\n "My quest is {name}" # References keyword argument \'name\'\n "Weight in tons {0.weight}" # \'weight\' attribute of first positional arg\n "Units destroyed: {players[0]}" # First element of keyword argument \'players\'.\n\nThe *conversion* field causes a type coercion before formatting.\nNormally, the job of formatting a value is done by the\n``__format__()`` method of the value itself. However, in some cases\nit is desirable to force a type to be formatted as a string,\noverriding its own definition of formatting. By converting the value\nto a string before calling ``__format__()``, the normal formatting\nlogic is bypassed.\n\nTwo conversion flags are currently supported: ``\'!s\'`` which calls\n``str()`` on the value, and ``\'!r\'`` which calls ``repr()``.\n\nSome examples:\n\n "Harold\'s a clever {0!s}" # Calls str() on the argument first\n "Bring out the holy {name!r}" # Calls repr() on the argument first\n\nThe *format_spec* field contains a specification of how the value\nshould be presented, including such details as field width, alignment,\npadding, decimal precision and so on. Each value type can define its\nown "formatting mini-language" or interpretation of the *format_spec*.\n\nMost built-in types support a common formatting mini-language, which\nis described in the next section.\n\nA *format_spec* field can also include nested replacement fields\nwithin it. These nested replacement fields can contain only a field\nname; conversion flags and format specifications are not allowed. The\nreplacement fields within the format_spec are substituted before the\n*format_spec* string is interpreted. This allows the formatting of a\nvalue to be dynamically specified.\n\nSee the *Format examples* section for some examples.\n\n\nFormat Specification Mini-Language\n==================================\n\n"Format specifications" are used within replacement fields contained\nwithin a format string to define how individual values are presented\n(see *Format String Syntax*). They can also be passed directly to the\nbuilt-in ``format()`` function. Each formattable type may define how\nthe format specification is to be interpreted.\n\nMost built-in types implement the following options for format\nspecifications, although some of the formatting options are only\nsupported by the numeric types.\n\nA general convention is that an empty format string (``""``) produces\nthe same result as if you had called ``str()`` on the value. A non-\nempty format string typically modifies the result.\n\nThe general form of a *standard format specifier* is:\n\n format_spec ::= [[fill]align][sign][#][0][width][,][.precision][type]\n fill ::= <a character other than \'}\'>\n align ::= "<" | ">" | "=" | "^"\n sign ::= "+" | "-" | " "\n width ::= integer\n precision ::= integer\n type ::= "b" | "c" | "d" | "e" | "E" | "f" | "F" | "g" | "G" | "n" | "o" | "s" | "x" | "X" | "%"\n\nThe *fill* character can be any character other than \'{\' or \'}\'. The\npresence of a fill character is signaled by the character following\nit, which must be one of the alignment options. If the second\ncharacter of *format_spec* is not a valid alignment option, then it is\nassumed that both the fill character and the alignment option are\nabsent.\n\nThe meaning of the various alignment options is as follows:\n\n +-----------+------------------------------------------------------------+\n | Option | Meaning |\n +===========+============================================================+\n | ``\'<\'`` | Forces the field to be left-aligned within the available |\n | | space (this is the default for most objects). |\n +-----------+------------------------------------------------------------+\n | ``\'>\'`` | Forces the field to be right-aligned within the available |\n | | space (this is the default for numbers). |\n +-----------+------------------------------------------------------------+\n | ``\'=\'`` | Forces the padding to be placed after the sign (if any) |\n | | but before the digits. This is used for printing fields |\n | | in the form \'+000000120\'. This alignment option is only |\n | | valid for numeric types. |\n +-----------+------------------------------------------------------------+\n | ``\'^\'`` | Forces the field to be centered within the available |\n | | space. |\n +-----------+------------------------------------------------------------+\n\nNote that unless a minimum field width is defined, the field width\nwill always be the same size as the data to fill it, so that the\nalignment option has no meaning in this case.\n\nThe *sign* option is only valid for number types, and can be one of\nthe following:\n\n +-----------+------------------------------------------------------------+\n | Option | Meaning |\n +===========+============================================================+\n | ``\'+\'`` | indicates that a sign should be used for both positive as |\n | | well as negative numbers. |\n +-----------+------------------------------------------------------------+\n | ``\'-\'`` | indicates that a sign should be used only for negative |\n | | numbers (this is the default behavior). |\n +-----------+------------------------------------------------------------+\n | space | indicates that a leading space should be used on positive |\n | | numbers, and a minus sign on negative numbers. |\n +-----------+------------------------------------------------------------+\n\nThe ``\'#\'`` option is only valid for integers, and only for binary,\noctal, or hexadecimal output. If present, it specifies that the\noutput will be prefixed by ``\'0b\'``, ``\'0o\'``, or ``\'0x\'``,\nrespectively.\n\nThe ``\',\'`` option signals the use of a comma for a thousands\nseparator. For a locale aware separator, use the ``\'n\'`` integer\npresentation type instead.\n\nChanged in version 2.7: Added the ``\',\'`` option (see also **PEP\n378**).\n\n*width* is a decimal integer defining the minimum field width. If not\nspecified, then the field width will be determined by the content.\n\nIf the *width* field is preceded by a zero (``\'0\'``) character, this\nenables zero-padding. This is equivalent to an *alignment* type of\n``\'=\'`` and a *fill* character of ``\'0\'``.\n\nThe *precision* is a decimal number indicating how many digits should\nbe displayed after the decimal point for a floating point value\nformatted with ``\'f\'`` and ``\'F\'``, or before and after the decimal\npoint for a floating point value formatted with ``\'g\'`` or ``\'G\'``.\nFor non-number types the field indicates the maximum field size - in\nother words, how many characters will be used from the field content.\nThe *precision* is not allowed for integer values.\n\nFinally, the *type* determines how the data should be presented.\n\nThe available string presentation types are:\n\n +-----------+------------------------------------------------------------+\n | Type | Meaning |\n +===========+============================================================+\n | ``\'s\'`` | String format. This is the default type for strings and |\n | | may be omitted. |\n +-----------+------------------------------------------------------------+\n | None | The same as ``\'s\'``. |\n +-----------+------------------------------------------------------------+\n\nThe available integer presentation types are:\n\n +-----------+------------------------------------------------------------+\n | Type | Meaning |\n +===========+============================================================+\n | ``\'b\'`` | Binary format. Outputs the number in base 2. |\n +-----------+------------------------------------------------------------+\n | ``\'c\'`` | Character. Converts the integer to the corresponding |\n | | unicode character before printing. |\n +-----------+------------------------------------------------------------+\n | ``\'d\'`` | Decimal Integer. Outputs the number in base 10. |\n +-----------+------------------------------------------------------------+\n | ``\'o\'`` | Octal format. Outputs the number in base 8. |\n +-----------+------------------------------------------------------------+\n | ``\'x\'`` | Hex format. Outputs the number in base 16, using lower- |\n | | case letters for the digits above 9. |\n +-----------+------------------------------------------------------------+\n | ``\'X\'`` | Hex format. Outputs the number in base 16, using upper- |\n | | case letters for the digits above 9. |\n +-----------+------------------------------------------------------------+\n | ``\'n\'`` | Number. This is the same as ``\'d\'``, except that it uses |\n | | the current locale setting to insert the appropriate |\n | | number separator characters. |\n +-----------+------------------------------------------------------------+\n | None | The same as ``\'d\'``. |\n +-----------+------------------------------------------------------------+\n\nIn addition to the above presentation types, integers can be formatted\nwith the floating point presentation types listed below (except\n``\'n\'`` and None). When doing so, ``float()`` is used to convert the\ninteger to a floating point number before formatting.\n\nThe available presentation types for floating point and decimal values\nare:\n\n +-----------+------------------------------------------------------------+\n | Type | Meaning |\n +===========+============================================================+\n | ``\'e\'`` | Exponent notation. Prints the number in scientific |\n | | notation using the letter \'e\' to indicate the exponent. |\n +-----------+------------------------------------------------------------+\n | ``\'E\'`` | Exponent notation. Same as ``\'e\'`` except it uses an upper |\n | | case \'E\' as the separator character. |\n +-----------+------------------------------------------------------------+\n | ``\'f\'`` | Fixed point. Displays the number as a fixed-point number. |\n +-----------+------------------------------------------------------------+\n | ``\'F\'`` | Fixed point. Same as ``\'f\'``. |\n +-----------+------------------------------------------------------------+\n | ``\'g\'`` | General format. For a given precision ``p >= 1``, this |\n | | rounds the number to ``p`` significant digits and then |\n | | formats the result in either fixed-point format or in |\n | | scientific notation, depending on its magnitude. The |\n | | precise rules are as follows: suppose that the result |\n | | formatted with presentation type ``\'e\'`` and precision |\n | | ``p-1`` would have exponent ``exp``. Then if ``-4 <= exp |\n | | < p``, the number is formatted with presentation type |\n | | ``\'f\'`` and precision ``p-1-exp``. Otherwise, the number |\n | | is formatted with presentation type ``\'e\'`` and precision |\n | | ``p-1``. In both cases insignificant trailing zeros are |\n | | removed from the significand, and the decimal point is |\n | | also removed if there are no remaining digits following |\n | | it. Positive and negative infinity, positive and negative |\n | | zero, and nans, are formatted as ``inf``, ``-inf``, ``0``, |\n | | ``-0`` and ``nan`` respectively, regardless of the |\n | | precision. A precision of ``0`` is treated as equivalent |\n | | to a precision of ``1``. |\n +-----------+------------------------------------------------------------+\n | ``\'G\'`` | General format. Same as ``\'g\'`` except switches to ``\'E\'`` |\n | | if the number gets too large. The representations of |\n | | infinity and NaN are uppercased, too. |\n +-----------+------------------------------------------------------------+\n | ``\'n\'`` | Number. This is the same as ``\'g\'``, except that it uses |\n | | the current locale setting to insert the appropriate |\n | | number separator characters. |\n +-----------+------------------------------------------------------------+\n | ``\'%\'`` | Percentage. Multiplies the number by 100 and displays in |\n | | fixed (``\'f\'``) format, followed by a percent sign. |\n +-----------+------------------------------------------------------------+\n | None | The same as ``\'g\'``. |\n +-----------+------------------------------------------------------------+\n\n\nFormat examples\n===============\n\nThis section contains examples of the new format syntax and comparison\nwith the old ``%``-formatting.\n\nIn most of the cases the syntax is similar to the old\n``%``-formatting, with the addition of the ``{}`` and with ``:`` used\ninstead of ``%``. For example, ``\'%03.2f\'`` can be translated to\n``\'{:03.2f}\'``.\n\nThe new format syntax also supports new and different options, shown\nin the follow examples.\n\nAccessing arguments by position:\n\n >>> \'{0}, {1}, {2}\'.format(\'a\', \'b\', \'c\')\n \'a, b, c\'\n >>> \'{}, {}, {}\'.format(\'a\', \'b\', \'c\') # 2.7+ only\n \'a, b, c\'\n >>> \'{2}, {1}, {0}\'.format(\'a\', \'b\', \'c\')\n \'c, b, a\'\n >>> \'{2}, {1}, {0}\'.format(*\'abc\') # unpacking argument sequence\n \'c, b, a\'\n >>> \'{0}{1}{0}\'.format(\'abra\', \'cad\') # arguments\' indices can be repeated\n \'abracadabra\'\n\nAccessing arguments by name:\n\n >>> \'Coordinates: {latitude}, {longitude}\'.format(latitude=\'37.24N\', longitude=\'-115.81W\')\n \'Coordinates: 37.24N, -115.81W\'\n >>> coord = {\'latitude\': \'37.24N\', \'longitude\': \'-115.81W\'}\n >>> \'Coordinates: {latitude}, {longitude}\'.format(**coord)\n \'Coordinates: 37.24N, -115.81W\'\n\nAccessing arguments\' attributes:\n\n >>> c = 3-5j\n >>> (\'The complex number {0} is formed from the real part {0.real} \'\n ... \'and the imaginary part {0.imag}.\').format(c)\n \'The complex number (3-5j) is formed from the real part 3.0 and the imaginary part -5.0.\'\n >>> class Point(object):\n ... def __init__(self, x, y):\n ... self.x, self.y = x, y\n ... def __str__(self):\n ... return \'Point({self.x}, {self.y})\'.format(self=self)\n ...\n >>> str(Point(4, 2))\n \'Point(4, 2)\'\n\nAccessing arguments\' items:\n\n >>> coord = (3, 5)\n >>> \'X: {0[0]}; Y: {0[1]}\'.format(coord)\n \'X: 3; Y: 5\'\n\nReplacing ``%s`` and ``%r``:\n\n >>> "repr() shows quotes: {!r}; str() doesn\'t: {!s}".format(\'test1\', \'test2\')\n "repr() shows quotes: \'test1\'; str() doesn\'t: test2"\n\nAligning the text and specifying a width:\n\n >>> \'{:<30}\'.format(\'left aligned\')\n \'left aligned \'\n >>> \'{:>30}\'.format(\'right aligned\')\n \' right aligned\'\n >>> \'{:^30}\'.format(\'centered\')\n \' centered \'\n >>> \'{:*^30}\'.format(\'centered\') # use \'*\' as a fill char\n \'***********centered***********\'\n\nReplacing ``%+f``, ``%-f``, and ``% f`` and specifying a sign:\n\n >>> \'{:+f}; {:+f}\'.format(3.14, -3.14) # show it always\n \'+3.140000; -3.140000\'\n >>> \'{: f}; {: f}\'.format(3.14, -3.14) # show a space for positive numbers\n \' 3.140000; -3.140000\'\n >>> \'{:-f}; {:-f}\'.format(3.14, -3.14) # show only the minus -- same as \'{:f}; {:f}\'\n \'3.140000; -3.140000\'\n\nReplacing ``%x`` and ``%o`` and converting the value to different\nbases:\n\n >>> # format also supports binary numbers\n >>> "int: {0:d}; hex: {0:x}; oct: {0:o}; bin: {0:b}".format(42)\n \'int: 42; hex: 2a; oct: 52; bin: 101010\'\n >>> # with 0x, 0o, or 0b as prefix:\n >>> "int: {0:d}; hex: {0:#x}; oct: {0:#o}; bin: {0:#b}".format(42)\n \'int: 42; hex: 0x2a; oct: 0o52; bin: 0b101010\'\n\nUsing the comma as a thousands separator:\n\n >>> \'{:,}\'.format(1234567890)\n \'1,234,567,890\'\n\nExpressing a percentage:\n\n >>> points = 19.5\n >>> total = 22\n >>> \'Correct answers: {:.2%}.\'.format(points/total)\n \'Correct answers: 88.64%\'\n\nUsing type-specific formatting:\n\n >>> import datetime\n >>> d = datetime.datetime(2010, 7, 4, 12, 15, 58)\n >>> \'{:%Y-%m-%d %H:%M:%S}\'.format(d)\n \'2010-07-04 12:15:58\'\n\nNesting arguments and more complex examples:\n\n >>> for align, text in zip(\'<^>\', [\'left\', \'center\', \'right\']):\n ... \'{0:{fill}{align}16}\'.format(text, fill=align, align=align)\n ...\n \'left<<<<<<<<<<<<\'\n \'^^^^^center^^^^^\'\n \'>>>>>>>>>>>right\'\n >>>\n >>> octets = [192, 168, 0, 1]\n >>> \'{:02X}{:02X}{:02X}{:02X}\'.format(*octets)\n \'C0A80001\'\n >>> int(_, 16)\n 3232235521\n >>>\n >>> width = 5\n >>> for num in range(5,12):\n ... for base in \'dXob\':\n ... print \'{0:{width}{base}}\'.format(num, base=base, width=width),\n ... print\n ...\n 5 5 5 101\n 6 6 6 110\n 7 7 7 111\n 8 8 10 1000\n 9 9 11 1001\n 10 A 12 1010\n 11 B 13 1011\n',
78 'typesseq': u'\nSequence Types --- ``str``, ``unicode``, ``list``, ``tuple``, ``bytearray``, ``buffer``, ``xrange``\n***************************************************************************************************\n\nThere are seven sequence types: strings, Unicode strings, lists,\ntuples, bytearrays, buffers, and xrange objects.\n\nFor other containers see the built in ``dict`` and ``set`` classes,\nand the ``collections`` module.\n\nString literals are written in single or double quotes: ``\'xyzzy\'``,\n``"frobozz"``. See *String literals* for more about string literals.\nUnicode strings are much like strings, but are specified in the syntax\nusing a preceding ``\'u\'`` character: ``u\'abc\'``, ``u"def"``. In\naddition to the functionality described here, there are also string-\nspecific methods described in the *String Methods* section. Lists are\nconstructed with square brackets, separating items with commas: ``[a,\nb, c]``. Tuples are constructed by the comma operator (not within\nsquare brackets), with or without enclosing parentheses, but an empty\ntuple must have the enclosing parentheses, such as ``a, b, c`` or\n``()``. A single item tuple must have a trailing comma, such as\n``(d,)``.\n\nBytearray objects are created with the built-in function\n``bytearray()``.\n\nBuffer objects are not directly supported by Python syntax, but can be\ncreated by calling the built-in function ``buffer()``. They don\'t\nsupport concatenation or repetition.\n\nObjects of type xrange are similar to buffers in that there is no\nspecific syntax to create them, but they are created using the\n``xrange()`` function. They don\'t support slicing, concatenation or\nrepetition, and using ``in``, ``not in``, ``min()`` or ``max()`` on\nthem is inefficient.\n\nMost sequence types support the following operations. The ``in`` and\n``not in`` operations have the same priorities as the comparison\noperations. The ``+`` and ``*`` operations have the same priority as\nthe corresponding numeric operations. [3] Additional methods are\nprovided for *Mutable Sequence Types*.\n\nThis table lists the sequence operations sorted in ascending priority\n(operations in the same box have the same priority). In the table,\n*s* and *t* are sequences of the same type; *n*, *i* and *j* are\nintegers:\n\n+--------------------+----------------------------------+------------+\n| Operation | Result | Notes |\n+====================+==================================+============+\n| ``x in s`` | ``True`` if an item of *s* is | (1) |\n| | equal to *x*, else ``False`` | |\n+--------------------+----------------------------------+------------+\n| ``x not in s`` | ``False`` if an item of *s* is | (1) |\n| | equal to *x*, else ``True`` | |\n+--------------------+----------------------------------+------------+\n| ``s + t`` | the concatenation of *s* and *t* | (6) |\n+--------------------+----------------------------------+------------+\n| ``s * n, n * s`` | *n* shallow copies of *s* | (2) |\n| | concatenated | |\n+--------------------+----------------------------------+------------+\n| ``s[i]`` | *i*\'th item of *s*, origin 0 | (3) |\n+--------------------+----------------------------------+------------+\n| ``s[i:j]`` | slice of *s* from *i* to *j* | (3)(4) |\n+--------------------+----------------------------------+------------+\n| ``s[i:j:k]`` | slice of *s* from *i* to *j* | (3)(5) |\n| | with step *k* | |\n+--------------------+----------------------------------+------------+\n| ``len(s)`` | length of *s* | |\n+--------------------+----------------------------------+------------+\n| ``min(s)`` | smallest item of *s* | |\n+--------------------+----------------------------------+------------+\n| ``max(s)`` | largest item of *s* | |\n+--------------------+----------------------------------+------------+\n| ``s.index(i)`` | index of the first occurence of | |\n| | *i* in *s* | |\n+--------------------+----------------------------------+------------+\n| ``s.count(i)`` | total number of occurences of | |\n| | *i* in *s* | |\n+--------------------+----------------------------------+------------+\n\nSequence types also support comparisons. In particular, tuples and\nlists are compared lexicographically by comparing corresponding\nelements. This means that to compare equal, every element must compare\nequal and the two sequences must be of the same type and have the same\nlength. (For full details see *Comparisons* in the language\nreference.)\n\nNotes:\n\n1. When *s* is a string or Unicode string object the ``in`` and ``not\n in`` operations act like a substring test. In Python versions\n before 2.3, *x* had to be a string of length 1. In Python 2.3 and\n beyond, *x* may be a string of any length.\n\n2. Values of *n* less than ``0`` are treated as ``0`` (which yields an\n empty sequence of the same type as *s*). Note also that the copies\n are shallow; nested structures are not copied. This often haunts\n new Python programmers; consider:\n\n >>> lists = [[]] * 3\n >>> lists\n [[], [], []]\n >>> lists[0].append(3)\n >>> lists\n [[3], [3], [3]]\n\n What has happened is that ``[[]]`` is a one-element list containing\n an empty list, so all three elements of ``[[]] * 3`` are (pointers\n to) this single empty list. Modifying any of the elements of\n ``lists`` modifies this single list. You can create a list of\n different lists this way:\n\n >>> lists = [[] for i in range(3)]\n >>> lists[0].append(3)\n >>> lists[1].append(5)\n >>> lists[2].append(7)\n >>> lists\n [[3], [5], [7]]\n\n3. If *i* or *j* is negative, the index is relative to the end of the\n string: ``len(s) + i`` or ``len(s) + j`` is substituted. But note\n that ``-0`` is still ``0``.\n\n4. The slice of *s* from *i* to *j* is defined as the sequence of\n items with index *k* such that ``i <= k < j``. If *i* or *j* is\n greater than ``len(s)``, use ``len(s)``. If *i* is omitted or\n ``None``, use ``0``. If *j* is omitted or ``None``, use\n ``len(s)``. If *i* is greater than or equal to *j*, the slice is\n empty.\n\n5. The slice of *s* from *i* to *j* with step *k* is defined as the\n sequence of items with index ``x = i + n*k`` such that ``0 <= n <\n (j-i)/k``. In other words, the indices are ``i``, ``i+k``,\n ``i+2*k``, ``i+3*k`` and so on, stopping when *j* is reached (but\n never including *j*). If *i* or *j* is greater than ``len(s)``,\n use ``len(s)``. If *i* or *j* are omitted or ``None``, they become\n "end" values (which end depends on the sign of *k*). Note, *k*\n cannot be zero. If *k* is ``None``, it is treated like ``1``.\n\n6. **CPython implementation detail:** If *s* and *t* are both strings,\n some Python implementations such as CPython can usually perform an\n in-place optimization for assignments of the form ``s = s + t`` or\n ``s += t``. When applicable, this optimization makes quadratic\n run-time much less likely. This optimization is both version and\n implementation dependent. For performance sensitive code, it is\n preferable to use the ``str.join()`` method which assures\n consistent linear concatenation performance across versions and\n implementations.\n\n Changed in version 2.4: Formerly, string concatenation never\n occurred in-place.\n\n\nString Methods\n==============\n\nBelow are listed the string methods which both 8-bit strings and\nUnicode objects support. Some of them are also available on\n``bytearray`` objects.\n\nIn addition, Python\'s strings support the sequence type methods\ndescribed in the *Sequence Types --- str, unicode, list, tuple,\nbytearray, buffer, xrange* section. To output formatted strings use\ntemplate strings or the ``%`` operator described in the *String\nFormatting Operations* section. Also, see the ``re`` module for string\nfunctions based on regular expressions.\n\nstr.capitalize()\n\n Return a copy of the string with its first character capitalized\n and the rest lowercased.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.center(width[, fillchar])\n\n Return centered in a string of length *width*. Padding is done\n using the specified *fillchar* (default is a space).\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.count(sub[, start[, end]])\n\n Return the number of non-overlapping occurrences of substring *sub*\n in the range [*start*, *end*]. Optional arguments *start* and\n *end* are interpreted as in slice notation.\n\nstr.decode([encoding[, errors]])\n\n Decodes the string using the codec registered for *encoding*.\n *encoding* defaults to the default string encoding. *errors* may\n be given to set a different error handling scheme. The default is\n ``\'strict\'``, meaning that encoding errors raise ``UnicodeError``.\n Other possible values are ``\'ignore\'``, ``\'replace\'`` and any other\n name registered via ``codecs.register_error()``, see section *Codec\n Base Classes*.\n\n New in version 2.2.\n\n Changed in version 2.3: Support for other error handling schemes\n added.\n\n Changed in version 2.7: Support for keyword arguments added.\n\nstr.encode([encoding[, errors]])\n\n Return an encoded version of the string. Default encoding is the\n current default string encoding. *errors* may be given to set a\n different error handling scheme. The default for *errors* is\n ``\'strict\'``, meaning that encoding errors raise a\n ``UnicodeError``. Other possible values are ``\'ignore\'``,\n ``\'replace\'``, ``\'xmlcharrefreplace\'``, ``\'backslashreplace\'`` and\n any other name registered via ``codecs.register_error()``, see\n section *Codec Base Classes*. For a list of possible encodings, see\n section *Standard Encodings*.\n\n New in version 2.0.\n\n Changed in version 2.3: Support for ``\'xmlcharrefreplace\'`` and\n ``\'backslashreplace\'`` and other error handling schemes added.\n\n Changed in version 2.7: Support for keyword arguments added.\n\nstr.endswith(suffix[, start[, end]])\n\n Return ``True`` if the string ends with the specified *suffix*,\n otherwise return ``False``. *suffix* can also be a tuple of\n suffixes to look for. With optional *start*, test beginning at\n that position. With optional *end*, stop comparing at that\n position.\n\n Changed in version 2.5: Accept tuples as *suffix*.\n\nstr.expandtabs([tabsize])\n\n Return a copy of the string where all tab characters are replaced\n by one or more spaces, depending on the current column and the\n given tab size. The column number is reset to zero after each\n newline occurring in the string. If *tabsize* is not given, a tab\n size of ``8`` characters is assumed. This doesn\'t understand other\n non-printing characters or escape sequences.\n\nstr.find(sub[, start[, end]])\n\n Return the lowest index in the string where substring *sub* is\n found, such that *sub* is contained in the slice ``s[start:end]``.\n Optional arguments *start* and *end* are interpreted as in slice\n notation. Return ``-1`` if *sub* is not found.\n\n Note: The ``find()`` method should be used only if you need to know the\n position of *sub*. To check if *sub* is a substring or not, use\n the ``in`` operator:\n\n >>> \'Py\' in \'Python\'\n True\n\nstr.format(*args, **kwargs)\n\n Perform a string formatting operation. The string on which this\n method is called can contain literal text or replacement fields\n delimited by braces ``{}``. Each replacement field contains either\n the numeric index of a positional argument, or the name of a\n keyword argument. Returns a copy of the string where each\n replacement field is replaced with the string value of the\n corresponding argument.\n\n >>> "The sum of 1 + 2 is {0}".format(1+2)\n \'The sum of 1 + 2 is 3\'\n\n See *Format String Syntax* for a description of the various\n formatting options that can be specified in format strings.\n\n This method of string formatting is the new standard in Python 3.0,\n and should be preferred to the ``%`` formatting described in\n *String Formatting Operations* in new code.\n\n New in version 2.6.\n\nstr.index(sub[, start[, end]])\n\n Like ``find()``, but raise ``ValueError`` when the substring is not\n found.\n\nstr.isalnum()\n\n Return true if all characters in the string are alphanumeric and\n there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isalpha()\n\n Return true if all characters in the string are alphabetic and\n there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isdigit()\n\n Return true if all characters in the string are digits and there is\n at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.islower()\n\n Return true if all cased characters in the string are lowercase and\n there is at least one cased character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isspace()\n\n Return true if there are only whitespace characters in the string\n and there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.istitle()\n\n Return true if the string is a titlecased string and there is at\n least one character, for example uppercase characters may only\n follow uncased characters and lowercase characters only cased ones.\n Return false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isupper()\n\n Return true if all cased characters in the string are uppercase and\n there is at least one cased character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.join(iterable)\n\n Return a string which is the concatenation of the strings in the\n *iterable* *iterable*. The separator between elements is the\n string providing this method.\n\nstr.ljust(width[, fillchar])\n\n Return the string left justified in a string of length *width*.\n Padding is done using the specified *fillchar* (default is a\n space). The original string is returned if *width* is less than\n ``len(s)``.\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.lower()\n\n Return a copy of the string converted to lowercase.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.lstrip([chars])\n\n Return a copy of the string with leading characters removed. The\n *chars* argument is a string specifying the set of characters to be\n removed. If omitted or ``None``, the *chars* argument defaults to\n removing whitespace. The *chars* argument is not a prefix; rather,\n all combinations of its values are stripped:\n\n >>> \' spacious \'.lstrip()\n \'spacious \'\n >>> \'www.example.com\'.lstrip(\'cmowz.\')\n \'example.com\'\n\n Changed in version 2.2.2: Support for the *chars* argument.\n\nstr.partition(sep)\n\n Split the string at the first occurrence of *sep*, and return a\n 3-tuple containing the part before the separator, the separator\n itself, and the part after the separator. If the separator is not\n found, return a 3-tuple containing the string itself, followed by\n two empty strings.\n\n New in version 2.5.\n\nstr.replace(old, new[, count])\n\n Return a copy of the string with all occurrences of substring *old*\n replaced by *new*. If the optional argument *count* is given, only\n the first *count* occurrences are replaced.\n\nstr.rfind(sub[, start[, end]])\n\n Return the highest index in the string where substring *sub* is\n found, such that *sub* is contained within ``s[start:end]``.\n Optional arguments *start* and *end* are interpreted as in slice\n notation. Return ``-1`` on failure.\n\nstr.rindex(sub[, start[, end]])\n\n Like ``rfind()`` but raises ``ValueError`` when the substring *sub*\n is not found.\n\nstr.rjust(width[, fillchar])\n\n Return the string right justified in a string of length *width*.\n Padding is done using the specified *fillchar* (default is a\n space). The original string is returned if *width* is less than\n ``len(s)``.\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.rpartition(sep)\n\n Split the string at the last occurrence of *sep*, and return a\n 3-tuple containing the part before the separator, the separator\n itself, and the part after the separator. If the separator is not\n found, return a 3-tuple containing two empty strings, followed by\n the string itself.\n\n New in version 2.5.\n\nstr.rsplit([sep[, maxsplit]])\n\n Return a list of the words in the string, using *sep* as the\n delimiter string. If *maxsplit* is given, at most *maxsplit* splits\n are done, the *rightmost* ones. If *sep* is not specified or\n ``None``, any whitespace string is a separator. Except for\n splitting from the right, ``rsplit()`` behaves like ``split()``\n which is described in detail below.\n\n New in version 2.4.\n\nstr.rstrip([chars])\n\n Return a copy of the string with trailing characters removed. The\n *chars* argument is a string specifying the set of characters to be\n removed. If omitted or ``None``, the *chars* argument defaults to\n removing whitespace. The *chars* argument is not a suffix; rather,\n all combinations of its values are stripped:\n\n >>> \' spacious \'.rstrip()\n \' spacious\'\n >>> \'mississippi\'.rstrip(\'ipz\')\n \'mississ\'\n\n Changed in version 2.2.2: Support for the *chars* argument.\n\nstr.split([sep[, maxsplit]])\n\n Return a list of the words in the string, using *sep* as the\n delimiter string. If *maxsplit* is given, at most *maxsplit*\n splits are done (thus, the list will have at most ``maxsplit+1``\n elements). If *maxsplit* is not specified, then there is no limit\n on the number of splits (all possible splits are made).\n\n If *sep* is given, consecutive delimiters are not grouped together\n and are deemed to delimit empty strings (for example,\n ``\'1,,2\'.split(\',\')`` returns ``[\'1\', \'\', \'2\']``). The *sep*\n argument may consist of multiple characters (for example,\n ``\'1<>2<>3\'.split(\'<>\')`` returns ``[\'1\', \'2\', \'3\']``). Splitting\n an empty string with a specified separator returns ``[\'\']``.\n\n If *sep* is not specified or is ``None``, a different splitting\n algorithm is applied: runs of consecutive whitespace are regarded\n as a single separator, and the result will contain no empty strings\n at the start or end if the string has leading or trailing\n whitespace. Consequently, splitting an empty string or a string\n consisting of just whitespace with a ``None`` separator returns\n ``[]``.\n\n For example, ``\' 1 2 3 \'.split()`` returns ``[\'1\', \'2\', \'3\']``,\n and ``\' 1 2 3 \'.split(None, 1)`` returns ``[\'1\', \'2 3 \']``.\n\nstr.splitlines([keepends])\n\n Return a list of the lines in the string, breaking at line\n boundaries. Line breaks are not included in the resulting list\n unless *keepends* is given and true.\n\nstr.startswith(prefix[, start[, end]])\n\n Return ``True`` if string starts with the *prefix*, otherwise\n return ``False``. *prefix* can also be a tuple of prefixes to look\n for. With optional *start*, test string beginning at that\n position. With optional *end*, stop comparing string at that\n position.\n\n Changed in version 2.5: Accept tuples as *prefix*.\n\nstr.strip([chars])\n\n Return a copy of the string with the leading and trailing\n characters removed. The *chars* argument is a string specifying the\n set of characters to be removed. If omitted or ``None``, the\n *chars* argument defaults to removing whitespace. The *chars*\n argument is not a prefix or suffix; rather, all combinations of its\n values are stripped:\n\n >>> \' spacious \'.strip()\n \'spacious\'\n >>> \'www.example.com\'.strip(\'cmowz.\')\n \'example\'\n\n Changed in version 2.2.2: Support for the *chars* argument.\n\nstr.swapcase()\n\n Return a copy of the string with uppercase characters converted to\n lowercase and vice versa.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.title()\n\n Return a titlecased version of the string where words start with an\n uppercase character and the remaining characters are lowercase.\n\n The algorithm uses a simple language-independent definition of a\n word as groups of consecutive letters. The definition works in\n many contexts but it means that apostrophes in contractions and\n possessives form word boundaries, which may not be the desired\n result:\n\n >>> "they\'re bill\'s friends from the UK".title()\n "They\'Re Bill\'S Friends From The Uk"\n\n A workaround for apostrophes can be constructed using regular\n expressions:\n\n >>> import re\n >>> def titlecase(s):\n return re.sub(r"[A-Za-z]+(\'[A-Za-z]+)?",\n lambda mo: mo.group(0)[0].upper() +\n mo.group(0)[1:].lower(),\n s)\n\n >>> titlecase("they\'re bill\'s friends.")\n "They\'re Bill\'s Friends."\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.translate(table[, deletechars])\n\n Return a copy of the string where all characters occurring in the\n optional argument *deletechars* are removed, and the remaining\n characters have been mapped through the given translation table,\n which must be a string of length 256.\n\n You can use the ``maketrans()`` helper function in the ``string``\n module to create a translation table. For string objects, set the\n *table* argument to ``None`` for translations that only delete\n characters:\n\n >>> \'read this short text\'.translate(None, \'aeiou\')\n \'rd ths shrt txt\'\n\n New in version 2.6: Support for a ``None`` *table* argument.\n\n For Unicode objects, the ``translate()`` method does not accept the\n optional *deletechars* argument. Instead, it returns a copy of the\n *s* where all characters have been mapped through the given\n translation table which must be a mapping of Unicode ordinals to\n Unicode ordinals, Unicode strings or ``None``. Unmapped characters\n are left untouched. Characters mapped to ``None`` are deleted.\n Note, a more flexible approach is to create a custom character\n mapping codec using the ``codecs`` module (see ``encodings.cp1251``\n for an example).\n\nstr.upper()\n\n Return a copy of the string converted to uppercase.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.zfill(width)\n\n Return the numeric string left filled with zeros in a string of\n length *width*. A sign prefix is handled correctly. The original\n string is returned if *width* is less than ``len(s)``.\n\n New in version 2.2.2.\n\nThe following methods are present only on unicode objects:\n\nunicode.isnumeric()\n\n Return ``True`` if there are only numeric characters in S,\n ``False`` otherwise. Numeric characters include digit characters,\n and all characters that have the Unicode numeric value property,\n e.g. U+2155, VULGAR FRACTION ONE FIFTH.\n\nunicode.isdecimal()\n\n Return ``True`` if there are only decimal characters in S,\n ``False`` otherwise. Decimal characters include digit characters,\n and all characters that that can be used to form decimal-radix\n numbers, e.g. U+0660, ARABIC-INDIC DIGIT ZERO.\n\n\nString Formatting Operations\n============================\n\nString and Unicode objects have one unique built-in operation: the\n``%`` operator (modulo). This is also known as the string\n*formatting* or *interpolation* operator. Given ``format % values``\n(where *format* is a string or Unicode object), ``%`` conversion\nspecifications in *format* are replaced with zero or more elements of\n*values*. The effect is similar to the using ``sprintf()`` in the C\nlanguage. If *format* is a Unicode object, or if any of the objects\nbeing converted using the ``%s`` conversion are Unicode objects, the\nresult will also be a Unicode object.\n\nIf *format* requires a single argument, *values* may be a single non-\ntuple object. [4] Otherwise, *values* must be a tuple with exactly\nthe number of items specified by the format string, or a single\nmapping object (for example, a dictionary).\n\nA conversion specifier contains two or more characters and has the\nfollowing components, which must occur in this order:\n\n1. The ``\'%\'`` character, which marks the start of the specifier.\n\n2. Mapping key (optional), consisting of a parenthesised sequence of\n characters (for example, ``(somename)``).\n\n3. Conversion flags (optional), which affect the result of some\n conversion types.\n\n4. Minimum field width (optional). If specified as an ``\'*\'``\n (asterisk), the actual width is read from the next element of the\n tuple in *values*, and the object to convert comes after the\n minimum field width and optional precision.\n\n5. Precision (optional), given as a ``\'.\'`` (dot) followed by the\n precision. If specified as ``\'*\'`` (an asterisk), the actual width\n is read from the next element of the tuple in *values*, and the\n value to convert comes after the precision.\n\n6. Length modifier (optional).\n\n7. Conversion type.\n\nWhen the right argument is a dictionary (or other mapping type), then\nthe formats in the string *must* include a parenthesised mapping key\ninto that dictionary inserted immediately after the ``\'%\'`` character.\nThe mapping key selects the value to be formatted from the mapping.\nFor example:\n\n>>> print \'%(language)s has %(number)03d quote types.\' % \\\n... {"language": "Python", "number": 2}\nPython has 002 quote types.\n\nIn this case no ``*`` specifiers may occur in a format (since they\nrequire a sequential parameter list).\n\nThe conversion flag characters are:\n\n+-----------+-----------------------------------------------------------------------+\n| Flag | Meaning |\n+===========+=======================================================================+\n| ``\'#\'`` | The value conversion will use the "alternate form" (where defined |\n| | below). |\n+-----------+-----------------------------------------------------------------------+\n| ``\'0\'`` | The conversion will be zero padded for numeric values. |\n+-----------+-----------------------------------------------------------------------+\n| ``\'-\'`` | The converted value is left adjusted (overrides the ``\'0\'`` |\n| | conversion if both are given). |\n+-----------+-----------------------------------------------------------------------+\n| ``\' \'`` | (a space) A blank should be left before a positive number (or empty |\n| | string) produced by a signed conversion. |\n+-----------+-----------------------------------------------------------------------+\n| ``\'+\'`` | A sign character (``\'+\'`` or ``\'-\'``) will precede the conversion |\n| | (overrides a "space" flag). |\n+-----------+-----------------------------------------------------------------------+\n\nA length modifier (``h``, ``l``, or ``L``) may be present, but is\nignored as it is not necessary for Python -- so e.g. ``%ld`` is\nidentical to ``%d``.\n\nThe conversion types are:\n\n+--------------+-------------------------------------------------------+---------+\n| Conversion | Meaning | Notes |\n+==============+=======================================================+=========+\n| ``\'d\'`` | Signed integer decimal. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'i\'`` | Signed integer decimal. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'o\'`` | Signed octal value. | (1) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'u\'`` | Obsolete type -- it is identical to ``\'d\'``. | (7) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'x\'`` | Signed hexadecimal (lowercase). | (2) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'X\'`` | Signed hexadecimal (uppercase). | (2) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'e\'`` | Floating point exponential format (lowercase). | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'E\'`` | Floating point exponential format (uppercase). | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'f\'`` | Floating point decimal format. | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'F\'`` | Floating point decimal format. | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'g\'`` | Floating point format. Uses lowercase exponential | (4) |\n| | format if exponent is less than -4 or not less than | |\n| | precision, decimal format otherwise. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'G\'`` | Floating point format. Uses uppercase exponential | (4) |\n| | format if exponent is less than -4 or not less than | |\n| | precision, decimal format otherwise. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'c\'`` | Single character (accepts integer or single character | |\n| | string). | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'r\'`` | String (converts any Python object using ``repr()``). | (5) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'s\'`` | String (converts any Python object using ``str()``). | (6) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'%\'`` | No argument is converted, results in a ``\'%\'`` | |\n| | character in the result. | |\n+--------------+-------------------------------------------------------+---------+\n\nNotes:\n\n1. The alternate form causes a leading zero (``\'0\'``) to be inserted\n between left-hand padding and the formatting of the number if the\n leading character of the result is not already a zero.\n\n2. The alternate form causes a leading ``\'0x\'`` or ``\'0X\'`` (depending\n on whether the ``\'x\'`` or ``\'X\'`` format was used) to be inserted\n between left-hand padding and the formatting of the number if the\n leading character of the result is not already a zero.\n\n3. The alternate form causes the result to always contain a decimal\n point, even if no digits follow it.\n\n The precision determines the number of digits after the decimal\n point and defaults to 6.\n\n4. The alternate form causes the result to always contain a decimal\n point, and trailing zeroes are not removed as they would otherwise\n be.\n\n The precision determines the number of significant digits before\n and after the decimal point and defaults to 6.\n\n5. The ``%r`` conversion was added in Python 2.0.\n\n The precision determines the maximal number of characters used.\n\n6. If the object or format provided is a ``unicode`` string, the\n resulting string will also be ``unicode``.\n\n The precision determines the maximal number of characters used.\n\n7. See **PEP 237**.\n\nSince Python strings have an explicit length, ``%s`` conversions do\nnot assume that ``\'\\0\'`` is the end of the string.\n\nChanged in version 2.7: ``%f`` conversions for numbers whose absolute\nvalue is over 1e50 are no longer replaced by ``%g`` conversions.\n\nAdditional string operations are defined in standard modules\n``string`` and ``re``.\n\n\nXRange Type\n===========\n\nThe ``xrange`` type is an immutable sequence which is commonly used\nfor looping. The advantage of the ``xrange`` type is that an\n``xrange`` object will always take the same amount of memory, no\nmatter the size of the range it represents. There are no consistent\nperformance advantages.\n\nXRange objects have very little behavior: they only support indexing,\niteration, and the ``len()`` function.\n\n\nMutable Sequence Types\n======================\n\nList and ``bytearray`` objects support additional operations that\nallow in-place modification of the object. Other mutable sequence\ntypes (when added to the language) should also support these\noperations. Strings and tuples are immutable sequence types: such\nobjects cannot be modified once created. The following operations are\ndefined on mutable sequence types (where *x* is an arbitrary object):\n\n+--------------------------------+----------------------------------+-----------------------+\n| Operation | Result | Notes |\n+================================+==================================+=======================+\n| ``s[i] = x`` | item *i* of *s* is replaced by | |\n| | *x* | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s[i:j] = t`` | slice of *s* from *i* to *j* is | |\n| | replaced by the contents of the | |\n| | iterable *t* | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``del s[i:j]`` | same as ``s[i:j] = []`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s[i:j:k] = t`` | the elements of ``s[i:j:k]`` are | (1) |\n| | replaced by those of *t* | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``del s[i:j:k]`` | removes the elements of | |\n| | ``s[i:j:k]`` from the list | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.append(x)`` | same as ``s[len(s):len(s)] = | (2) |\n| | [x]`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.extend(x)`` | same as ``s[len(s):len(s)] = x`` | (3) |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.count(x)`` | return number of *i*\'s for which | |\n| | ``s[i] == x`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.index(x[, i[, j]])`` | return smallest *k* such that | (4) |\n| | ``s[k] == x`` and ``i <= k < j`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.insert(i, x)`` | same as ``s[i:i] = [x]`` | (5) |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.pop([i])`` | same as ``x = s[i]; del s[i]; | (6) |\n| | return x`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.remove(x)`` | same as ``del s[s.index(x)]`` | (4) |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.reverse()`` | reverses the items of *s* in | (7) |\n| | place | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.sort([cmp[, key[, | sort the items of *s* in place | (7)(8)(9)(10) |\n| reverse]]])`` | | |\n+--------------------------------+----------------------------------+-----------------------+\n\nNotes:\n\n1. *t* must have the same length as the slice it is replacing.\n\n2. The C implementation of Python has historically accepted multiple\n parameters and implicitly joined them into a tuple; this no longer\n works in Python 2.0. Use of this misfeature has been deprecated\n since Python 1.4.\n\n3. *x* can be any iterable object.\n\n4. Raises ``ValueError`` when *x* is not found in *s*. When a negative\n index is passed as the second or third parameter to the ``index()``\n method, the list length is added, as for slice indices. If it is\n still negative, it is truncated to zero, as for slice indices.\n\n Changed in version 2.3: Previously, ``index()`` didn\'t have\n arguments for specifying start and stop positions.\n\n5. When a negative index is passed as the first parameter to the\n ``insert()`` method, the list length is added, as for slice\n indices. If it is still negative, it is truncated to zero, as for\n slice indices.\n\n Changed in version 2.3: Previously, all negative indices were\n truncated to zero.\n\n6. The ``pop()`` method is only supported by the list and array types.\n The optional argument *i* defaults to ``-1``, so that by default\n the last item is removed and returned.\n\n7. The ``sort()`` and ``reverse()`` methods modify the list in place\n for economy of space when sorting or reversing a large list. To\n remind you that they operate by side effect, they don\'t return the\n sorted or reversed list.\n\n8. The ``sort()`` method takes optional arguments for controlling the\n comparisons.\n\n *cmp* specifies a custom comparison function of two arguments (list\n items) which should return a negative, zero or positive number\n depending on whether the first argument is considered smaller than,\n equal to, or larger than the second argument: ``cmp=lambda x,y:\n cmp(x.lower(), y.lower())``. The default value is ``None``.\n\n *key* specifies a function of one argument that is used to extract\n a comparison key from each list element: ``key=str.lower``. The\n default value is ``None``.\n\n *reverse* is a boolean value. If set to ``True``, then the list\n elements are sorted as if each comparison were reversed.\n\n In general, the *key* and *reverse* conversion processes are much\n faster than specifying an equivalent *cmp* function. This is\n because *cmp* is called multiple times for each list element while\n *key* and *reverse* touch each element only once. Use\n ``functools.cmp_to_key()`` to convert an old-style *cmp* function\n to a *key* function.\n\n Changed in version 2.3: Support for ``None`` as an equivalent to\n omitting *cmp* was added.\n\n Changed in version 2.4: Support for *key* and *reverse* was added.\n\n9. Starting with Python 2.3, the ``sort()`` method is guaranteed to be\n stable. A sort is stable if it guarantees not to change the\n relative order of elements that compare equal --- this is helpful\n for sorting in multiple passes (for example, sort by department,\n then by salary grade).\n\n10. **CPython implementation detail:** While a list is being sorted,\n the effect of attempting to mutate, or even inspect, the list is\n undefined. The C implementation of Python 2.3 and newer makes the\n list appear empty for the duration, and raises ``ValueError`` if\n it can detect that the list has been mutated during a sort.\n',

Completed in 333 milliseconds

12