main.mk revision 4afb4f20fcedb5fee6af9faf2bf361808d183132
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# These are the modifier targets that don't do anything themselves, but 89# change the behavior of the build. 90# (must be defined before including definitions.make) 91INTERNAL_MODIFIER_TARGETS := showcommands 92 93# Bring in standard build system definitions. 94include $(BUILD_SYSTEM)/definitions.mk 95 96ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 97$(info ***************************************************************) 98$(info ***************************************************************) 99$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 100 the make command line.) 101# XXX The single quote on this line fixes gvim's syntax highlighting. 102# Without which, the rest of this file is impossible to read. 103$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 104$(info choosecombo.) 105$(info ***************************************************************) 106$(info ***************************************************************) 107$(error stopping) 108endif 109 110ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 111$(info ***************************************************************) 112$(info ***************************************************************) 113$(info Invalid variant: $(TARGET_BUILD_VARIANT) 114$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 115$(info ***************************************************************) 116$(info ***************************************************************) 117$(error stopping) 118endif 119 120### 121### In this section we set up the things that are different 122### between the build variants 123### 124 125is_sdk_build := 126ifneq ($(filter sdk,$(MAKECMDGOALS)),) 127is_sdk_build := true 128endif 129ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 130is_sdk_build := true 131endif 132 133 134## user/userdebug ## 135 136user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 137enable_target_debugging := true 138ifneq (,$(user_variant)) 139 # Target is secure in user builds. 140 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 141 142 tags_to_install := user 143 ifeq ($(user_variant),userdebug) 144 # Pick up some extra useful tools 145 tags_to_install += debug 146 else 147 # Disable debugging in plain user builds. 148 enable_target_debugging := 149 endif 150 151 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 152 # Also, remove the corresponding block in config/product_config.make. 153 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 154 WITH_DEXPREOPT := true 155 endif 156 157 # Disallow mock locations by default for user builds 158 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 159 160else # !user_variant 161 # Turn on checkjni for non-user builds. 162 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 163 # Set device insecure for non-user builds. 164 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 165 # Allow mock locations by default for non user builds 166 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 167endif # !user_variant 168 169ifeq (true,$(strip $(enable_target_debugging))) 170 # Target is more debuggable and adbd is on by default 171 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 172 # Include the debugging/testing OTA keys in this build. 173 INCLUDE_TEST_OTA_KEYS := true 174else # !enable_target_debugging 175 # Target is less debuggable and adbd is off by default 176 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 177endif # !enable_target_debugging 178 179## eng ## 180 181ifeq ($(TARGET_BUILD_VARIANT),eng) 182tags_to_install := user debug eng 183 # Don't require the setup wizard on eng builds 184 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 185 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 186endif 187 188## tests ## 189 190ifeq ($(TARGET_BUILD_VARIANT),tests) 191tags_to_install := user debug eng tests 192endif 193 194## sdk ## 195 196ifdef is_sdk_build 197ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 198$(error The 'sdk' target may not be specified with any other targets) 199endif 200# TODO: this should be eng I think. Since the sdk is built from the eng 201# variant. 202tags_to_install := user debug eng 203ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 204ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 205else # !sdk 206# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 207ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 208endif 209 210## precise GC ## 211 212ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 213 # Enabling type-precise GC results in larger optimized DEX files. The 214 # additional storage requirements for ".odex" files can cause /system 215 # to overflow on some devices, so this is configured separately for 216 # each product. 217 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 218endif 219 220# Install an apns-conf.xml file if one's not already being installed. 221ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 222 PRODUCT_COPY_FILES += \ 223 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 224 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 225 $(warning implicitly installing apns-conf_sdk.xml) 226 endif 227endif 228# If we're on an eng or tests build, but not on the sdk, and we have 229# a better one, use that instead. 230ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 231 ifdef is_sdk_build 232 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 233 ifneq ($(strip $(apns_to_use)),) 234 PRODUCT_COPY_FILES := \ 235 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 236 $(strip $(apns_to_use)):system/etc/apns-conf.xml 237 endif 238 endif 239endif 240 241ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 242 243# enable vm tracing in files for now to help track 244# the cause of ANRs in the content process 245ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 246 247 248# ------------------------------------------------------------ 249# Define a function that, given a list of module tags, returns 250# non-empty if that module should be installed in /system. 251 252# For most goals, anything not tagged with the "tests" tag should 253# be installed in /system. 254define should-install-to-system 255$(if $(filter tests,$(1)),,true) 256endef 257 258ifdef is_sdk_build 259# For the sdk goal, anything with the "samples" tag should be 260# installed in /data even if that module also has "eng"/"debug"/"user". 261define should-install-to-system 262$(if $(filter samples tests,$(1)),,true) 263endef 264endif 265 266 267# If all they typed was make showcommands, we'll actually build 268# the default target. 269ifeq ($(MAKECMDGOALS),showcommands) 270.PHONY: showcommands 271showcommands: $(DEFAULT_GOAL) 272endif 273 274# These targets are going to delete stuff, don't bother including 275# the whole directory tree if that's all we're going to do 276ifeq ($(MAKECMDGOALS),clean) 277dont_bother := true 278endif 279ifeq ($(MAKECMDGOALS),clobber) 280dont_bother := true 281endif 282ifeq ($(MAKECMDGOALS),dataclean) 283dont_bother := true 284endif 285ifeq ($(MAKECMDGOALS),installclean) 286dont_bother := true 287endif 288 289# Bring in all modules that need to be built. 290ifneq ($(dont_bother),true) 291 292subdir_makefiles := 293 294ifeq ($(HOST_OS),windows) 295SDK_ONLY := true 296endif 297ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 298SDK_ONLY := true 299endif 300 301ifeq ($(SDK_ONLY),true) 302 303subdirs := \ 304 prebuilt \ 305 build/libs/host \ 306 dalvik/dexdump \ 307 dalvik/libdex \ 308 dalvik/tools/dmtracedump \ 309 dalvik/tools/hprof-conv \ 310 development/emulator/mksdcard \ 311 development/tools/line_endings \ 312 development/host \ 313 external/expat \ 314 external/libpng \ 315 external/qemu \ 316 external/sqlite/dist \ 317 external/zlib \ 318 frameworks/base/libs/utils \ 319 frameworks/base/tools/aapt \ 320 frameworks/base/tools/aidl \ 321 system/core/adb \ 322 system/core/fastboot \ 323 system/core/libcutils \ 324 system/core/liblog \ 325 system/core/libzipfile 326 327# The following can only be built if "javac" is available. 328# This check is used when building parts of the SDK under Cygwin. 329ifneq (,$(shell which javac 2>/dev/null)) 330$(warning sdk-only: javac available.) 331subdirs += \ 332 build/tools/signapk \ 333 build/tools/zipalign \ 334 dalvik/dx \ 335 dalvik/libcore \ 336 development/apps \ 337 development/tools/androidprefs \ 338 development/tools/apkbuilder \ 339 development/tools/jarutils \ 340 development/tools/layoutlib_utils \ 341 development/tools/ninepatch \ 342 development/tools/sdkstats \ 343 development/tools/sdkmanager \ 344 development/tools/mkstubs \ 345 frameworks/base \ 346 frameworks/base/tools/layoutlib \ 347 external/googleclient \ 348 packages 349else 350$(warning sdk-only: javac not available.) 351endif 352 353# Exclude tools/acp when cross-compiling windows under linux 354ifeq ($(findstring Linux,$(UNAME)),) 355subdirs += build/tools/acp 356endif 357 358else # !SDK_ONLY 359ifeq ($(BUILD_TINY_ANDROID), true) 360 361# TINY_ANDROID is a super-minimal build configuration, handy for board 362# bringup and very low level debugging 363 364INTERNAL_DEFAULT_DOCS_TARGETS := 365 366subdirs := \ 367 bionic \ 368 system/core \ 369 build/libs \ 370 build/target \ 371 build/tools/acp \ 372 build/tools/apriori \ 373 build/tools/kcm \ 374 build/tools/soslim \ 375 external/elfcopy \ 376 external/elfutils \ 377 external/yaffs2 \ 378 external/zlib 379else # !BUILD_TINY_ANDROID 380 381# 382# Typical build; include any Android.mk files we can find. 383# 384INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 385subdirs := $(TOP) 386 387FULL_BUILD := true 388 389endif # !BUILD_TINY_ANDROID 390 391endif # !SDK_ONLY 392 393# Can't use first-makefiles-under here because 394# --mindepth=2 makes the prunes not work. 395subdir_makefiles += \ 396 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 397 398# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 399# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 400# make sure only one exists. 401# Real boards should always be associated with an OEM vendor. 402board_config_mk := \ 403 $(strip $(wildcard \ 404 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 405 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 406 )) 407ifeq ($(board_config_mk),) 408 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 409endif 410ifneq ($(words $(board_config_mk)),1) 411 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 412endif 413include $(board_config_mk) 414TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 415board_config_mk := 416 417# Clean up/verify variables defined by the board config file. 418TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 419TARGET_CPU_ABI := $(strip $(TARGET_CPU_ABI)) 420ifeq ($(TARGET_CPU_ABI),) 421 $(error No TARGET_CPU_ABI defined by board config: $(board_config_mk)) 422endif 423 424# 425# Include all of the makefiles in the system 426# 427 428ifneq ($(ONE_SHOT_MAKEFILE),) 429# We've probably been invoked by the "mm" shell function 430# with a subdirectory's makefile. 431include $(ONE_SHOT_MAKEFILE) 432# Change CUSTOM_MODULES to include only modules that were 433# defined by this makefile; this will install all of those 434# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 435# so that the modules will be installed in the same place they 436# would have been with a normal make. 437CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 438FULL_BUILD := 439INTERNAL_DEFAULT_DOCS_TARGETS := 440# Stub out the notice targets, which probably aren't defined 441# when using ONE_SHOT_MAKEFILE. 442NOTICE-HOST-%: ; 443NOTICE-TARGET-%: ; 444else 445include $(subdir_makefiles) 446endif 447# ------------------------------------------------------------------- 448# All module makefiles have been included at this point. 449# ------------------------------------------------------------------- 450 451# ------------------------------------------------------------------- 452# Include any makefiles that must happen after the module makefiles 453# have been included. 454# TODO: have these files register themselves via a global var rather 455# than hard-coding the list here. 456ifdef FULL_BUILD 457 # Only include this during a full build, otherwise we can't be 458 # guaranteed that any policies were included. 459 -include frameworks/policies/base/PolicyConfig.mk 460endif 461 462# ------------------------------------------------------------------- 463# Fix up CUSTOM_MODULES to refer to installed files rather than 464# just bare module names. Leave unknown modules alone in case 465# they're actually full paths to a particular file. 466known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 467unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 468CUSTOM_MODULES := \ 469 $(call module-installed-files,$(known_custom_modules)) \ 470 $(unknown_custom_modules) 471 472# ------------------------------------------------------------------- 473# Define dependencies for modules that require other modules. 474# This can only happen now, after we've read in all module makefiles. 475# 476# TODO: deal with the fact that a bare module name isn't 477# unambiguous enough. Maybe declare short targets like 478# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 479# BUG: the system image won't know to depend on modules that are 480# brought in as requirements of other modules. 481define add-required-deps 482$(1): $(2) 483endef 484$(foreach m,$(ALL_MODULES), \ 485 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 486 $(if $(r), \ 487 $(eval r := $(call module-installed-files,$(r))) \ 488 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 489 ) \ 490 ) 491m := 492r := 493add-required-deps := 494 495# ------------------------------------------------------------------- 496# Figure out our module sets. 497 498# Of the modules defined by the component makefiles, 499# determine what we actually want to build. 500# If a module has the "restricted" tag on it, it 501# poisons the rest of the tags and shouldn't appear 502# on any list. 503Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 504 $(ALL_BUILT_MODULES) \ 505 $(CUSTOM_MODULES)) 506# TODO: Remove the 3 places in the tree that use 507# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 508 509ifdef FULL_BUILD 510 # The base list of modules to build for this product is specified 511 # by the appropriate product definition file, which was included 512 # by product_config.make. 513 user_PACKAGES := $(call module-installed-files, \ 514 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 515 ifeq (0,1) 516 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 517 $(foreach p,$(user_PACKAGES),$(info : $(p))) 518 $(error done) 519 endif 520else 521 # We're not doing a full build, and are probably only including 522 # a subset of the module makefiles. Don't try to build any modules 523 # requested by the product, because we probably won't have rules 524 # to build them. 525 user_PACKAGES := 526endif 527# Use tags to get the non-APPS user modules. Use the product 528# definition files to get the APPS user modules. 529user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 530user_MODULES := $(user_MODULES) $(user_PACKAGES) 531 532eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 533debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 534tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 535 536ifeq ($(strip $(tags_to_install)),) 537$(error ASSERTION FAILED: tags_to_install should not be empty) 538endif 539modules_to_install := $(sort $(Default_MODULES) \ 540 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 541 542# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 543# Filter out (do not install) any overridden packages. 544overridden_packages := $(call get-package-overrides,$(modules_to_install)) 545ifdef overridden_packages 546# old_modules_to_install := $(modules_to_install) 547 modules_to_install := \ 548 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 549 $(modules_to_install)) 550endif 551#$(error filtered out 552# $(filter-out $(modules_to_install),$(old_modules_to_install))) 553 554# Don't include any GNU targets in the SDK. It's ok (and necessary) 555# to build the host tools, but nothing that's going to be installed 556# on the target (including static libraries). 557ifdef is_sdk_build 558 target_gnu_MODULES := \ 559 $(filter \ 560 $(TARGET_OUT_INTERMEDIATES)/% \ 561 $(TARGET_OUT)/% \ 562 $(TARGET_OUT_DATA)/%, \ 563 $(sort $(call get-tagged-modules,gnu))) 564 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 565 modules_to_install := \ 566 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 567endif 568 569 570# config/Makefile contains extra stuff that we don't want to pollute this 571# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 572# contains everything that's built during the current make, but it also further 573# extends ALL_DEFAULT_INSTALLED_MODULES. 574ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 575include $(BUILD_SYSTEM)/Makefile 576modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 577ALL_DEFAULT_INSTALLED_MODULES := 578 579endif # dont_bother 580 581# ------------------------------------------------------------------- 582# This is used to to get the ordering right, you can also use these, 583# but they're considered undocumented, so don't complain if their 584# behavior changes. 585.PHONY: prebuilt 586prebuilt: $(ALL_PREBUILT) 587 588# An internal target that depends on all copied headers 589# (see copy_headers.make). Other targets that need the 590# headers to be copied first can depend on this target. 591.PHONY: all_copied_headers 592all_copied_headers: ; 593 594$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 595 596# All the droid stuff, in directories 597.PHONY: files 598files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 599 600# ------------------------------------------------------------------- 601 602.PHONY: ramdisk 603ramdisk: $(INSTALLED_RAMDISK_TARGET) 604 605.PHONY: systemtarball 606systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 607 608.PHONY: userdataimage 609userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 610 611.PHONY: userdatatarball 612userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 613 614.PHONY: bootimage 615bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 616 617ifeq ($(BUILD_TINY_ANDROID), true) 618INSTALLED_RECOVERYIMAGE_TARGET := 619endif 620 621# Build files and then package it into the rom formats 622.PHONY: droidcore 623droidcore: files \ 624 systemimage \ 625 $(INSTALLED_BOOTIMAGE_TARGET) \ 626 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 627 $(INSTALLED_USERDATAIMAGE_TARGET) \ 628 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 629 $(INSTALLED_FILES_FILE) 630 631# The actual files built by the droidcore target changes depending 632# on the build variant. 633.PHONY: droid tests 634droid tests: droidcore 635 636$(call dist-for-goals, droid, \ 637 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 638 $(INTERNAL_OTA_PACKAGE_TARGET) \ 639 $(SYMBOLS_ZIP) \ 640 $(APPS_ZIP) \ 641 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 642 $(PACKAGE_STATS_FILE) \ 643 $(INSTALLED_FILES_FILE) \ 644 $(INSTALLED_BUILD_PROP_TARGET) \ 645 $(BUILT_TARGET_FILES_PACKAGE) \ 646 ) 647 648# Tests are installed in userdata.img. If we're building the tests 649# variant, copy it for "make tests dist". Also copy a zip of the 650# contents of userdata.img, so that people can easily extract a 651# single .apk. 652ifeq ($(TARGET_BUILD_VARIANT),tests) 653$(call dist-for-goals, droid, \ 654 $(INSTALLED_USERDATAIMAGE_TARGET) \ 655 $(BUILT_TESTS_ZIP_PACKAGE) \ 656 ) 657endif 658 659.PHONY: docs 660docs: $(ALL_DOCS) 661 662.PHONY: sdk 663ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 664sdk: $(ALL_SDK_TARGETS) 665$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 666 667.PHONY: findbugs 668findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 669 670.PHONY: clean 671dirs_to_clean := \ 672 $(PRODUCT_OUT) \ 673 $(TARGET_COMMON_OUT_ROOT) \ 674 $(HOST_OUT) \ 675 $(HOST_COMMON_OUT_ROOT) 676clean: 677 @for dir in $(dirs_to_clean) ; do \ 678 echo "Cleaning $$dir..."; \ 679 rm -rf $$dir; \ 680 done 681 @echo "Clean."; \ 682 683.PHONY: clobber 684clobber: 685 @rm -rf $(OUT_DIR) 686 @echo "Entire build directory removed." 687 688# The rules for dataclean and installclean are defined in cleanbuild.mk. 689 690#xxx scrape this from ALL_MODULE_NAME_TAGS 691.PHONY: modules 692modules: 693 @echo "Available sub-modules:" 694 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 695 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 696 697.PHONY: showcommands 698showcommands: 699 @echo >/dev/null 700 701