main.mk revision a64dbd75becf1cbbaa96403b39c99d58ba0b75cf
1# Only use ANDROID_BUILD_SHELL to wrap around bash. 2# DO NOT use other shells such as zsh. 3ifdef ANDROID_BUILD_SHELL 4SHELL := $(ANDROID_BUILD_SHELL) 5else 6# Use bash, not whatever shell somebody has installed as /bin/sh 7# This is repeated in config.mk, since envsetup.sh runs that file 8# directly. 9SHELL := /bin/bash 10endif 11 12# this turns off the suffix rules built into make 13.SUFFIXES: 14 15# If a rule fails, delete $@. 16.DELETE_ON_ERROR: 17 18# Figure out where we are. 19#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 20#TOP := $(patsubst %/,%,$(TOP)) 21 22# TOPDIR is the normal variable you should use, because 23# if we are executing relative to the current directory 24# it can be "", whereas TOP must be "." which causes 25# pattern matching probles when make strips off the 26# trailing "./" from paths in various places. 27#ifeq ($(TOP),.) 28#TOPDIR := 29#else 30#TOPDIR := $(TOP)/ 31#endif 32 33# check for broken versions of make 34ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 35$(warning ********************************************************************************) 36$(warning * You are using version $(MAKE_VERSION) of make.) 37$(warning * You must upgrade to version 3.81 or greater.) 38$(warning * see http://source.android.com/download) 39$(warning ********************************************************************************) 40$(error stopping) 41endif 42 43TOP := . 44TOPDIR := 45 46BUILD_SYSTEM := $(TOPDIR)build/core 47 48# This is the default target. It must be the first declared target. 49DEFAULT_GOAL := droid 50$(DEFAULT_GOAL): 51 52# Used to force goals to build. Only use for conditionally defined goals. 53.PHONY: FORCE 54FORCE: 55 56# Set up various standard variables based on configuration 57# and host information. 58include $(BUILD_SYSTEM)/config.mk 59 60# This allows us to force a clean build - included after the config.make 61# environment setup is done, but before we generate any dependencies. This 62# file does the rm -rf inline so the deps which are all done below will 63# be generated correctly 64include $(BUILD_SYSTEM)/cleanbuild.mk 65 66VERSION_CHECK_SEQUENCE_NUMBER := 1 67-include $(OUT_DIR)/versions_checked.mk 68ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED)) 69 70$(info Checking build tools versions...) 71 72ifneq ($(HOST_OS),windows) 73ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 74# check for a case sensitive file system 75ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 76 echo a > $(OUT_DIR)/casecheck.txt; \ 77 echo B > $(OUT_DIR)/CaseCheck.txt; \ 78 cat $(OUT_DIR)/casecheck.txt)) 79$(warning ************************************************************) 80$(warning You are building on a case-insensitive filesystem.) 81$(warning Please move your source tree to a case-sensitive filesystem.) 82$(warning ************************************************************) 83$(error Case-insensitive filesystems not supported) 84endif 85endif 86endif 87 88# Make sure that there are no spaces in the absolute path; the 89# build system can't deal with them. 90ifneq ($(words $(shell pwd)),1) 91$(warning ************************************************************) 92$(warning You are building in a directory whose absolute path contains) 93$(warning a space character:) 94$(warning $(space)) 95$(warning "$(shell pwd)") 96$(warning $(space)) 97$(warning Please move your source tree to a path that does not contain) 98$(warning any spaces.) 99$(warning ************************************************************) 100$(error Directory names containing spaces not supported) 101endif 102 103 104# The windows build server currently uses 1.6. This will be fixed. 105ifneq ($(HOST_OS),windows) 106 107# Check for the correct version of java 108java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 109ifeq ($(strip $(java_version)),) 110$(info ************************************************************) 111$(info You are attempting to build with the incorrect version) 112$(info of java.) 113$(info $(space)) 114$(info Your version is: $(shell java -version 2>&1 | head -n 1).) 115$(info The correct version is: 1.5.) 116$(info $(space)) 117$(info Please follow the machine setup instructions at) 118$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 119$(info ************************************************************) 120$(error stop) 121endif 122 123# Check for the correct version of javac 124javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 125ifeq ($(strip $(javac_version)),) 126$(info ************************************************************) 127$(info You are attempting to build with the incorrect version) 128$(info of javac.) 129$(info $(space)) 130$(info Your version is: $(shell javac -version 2>&1 | head -n 1).) 131$(info The correct version is: 1.5.) 132$(info $(space)) 133$(info Please follow the machine setup instructions at) 134$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 135$(info ************************************************************) 136$(error stop) 137endif 138 139endif # windows 140 141$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \ 142 > $(OUT_DIR)/versions_checked.mk) 143endif 144 145# These are the modifier targets that don't do anything themselves, but 146# change the behavior of the build. 147# (must be defined before including definitions.make) 148INTERNAL_MODIFIER_TARGETS := showcommands checkbuild 149 150# Bring in standard build system definitions. 151include $(BUILD_SYSTEM)/definitions.mk 152 153ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 154$(info ***************************************************************) 155$(info ***************************************************************) 156$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 157 the make command line.) 158# XXX The single quote on this line fixes gvim's syntax highlighting. 159# Without which, the rest of this file is impossible to read. 160$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 161$(info choosecombo.) 162$(info ***************************************************************) 163$(info ***************************************************************) 164$(error stopping) 165endif 166 167ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 168$(info ***************************************************************) 169$(info ***************************************************************) 170$(info Invalid variant: $(TARGET_BUILD_VARIANT) 171$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 172$(info ***************************************************************) 173$(info ***************************************************************) 174$(error stopping) 175endif 176 177### 178### In this section we set up the things that are different 179### between the build variants 180### 181 182is_sdk_build := 183ifneq ($(filter sdk,$(MAKECMDGOALS)),) 184is_sdk_build := true 185endif 186ifneq ($(filter win_sdk,$(MAKECMDGOALS)),) 187is_sdk_build := true 188endif 189ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 190is_sdk_build := true 191endif 192 193 194## user/userdebug ## 195 196user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 197enable_target_debugging := true 198ifneq (,$(user_variant)) 199 # Target is secure in user builds. 200 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 201 202 tags_to_install := user 203 ifeq ($(user_variant),userdebug) 204 # Pick up some extra useful tools 205 tags_to_install += debug 206 207 # Enable Dalvik lock contention logging for userdebug builds. 208 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500 209 else 210 # Disable debugging in plain user builds. 211 enable_target_debugging := 212 endif 213 214 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 215 # Also, remove the corresponding block in config/product_config.make. 216 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 217 WITH_DEXPREOPT := true 218 endif 219 220 # Disallow mock locations by default for user builds 221 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 222 223else # !user_variant 224 # Turn on checkjni for non-user builds. 225 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 226 # Set device insecure for non-user builds. 227 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 228 # Allow mock locations by default for non user builds 229 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 230endif # !user_variant 231 232ifeq (true,$(strip $(enable_target_debugging))) 233 # Target is more debuggable and adbd is on by default 234 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 235 # Include the debugging/testing OTA keys in this build. 236 INCLUDE_TEST_OTA_KEYS := true 237else # !enable_target_debugging 238 # Target is less debuggable and adbd is off by default 239 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 240endif # !enable_target_debugging 241 242## eng ## 243 244ifeq ($(TARGET_BUILD_VARIANT),eng) 245tags_to_install := user debug eng 246 # Don't require the setup wizard on eng builds 247 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 248 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \ 249 ro.setupwizard.mode=OPTIONAL 250endif 251 252## tests ## 253 254ifeq ($(TARGET_BUILD_VARIANT),tests) 255tags_to_install := user debug eng tests 256endif 257 258## sdk ## 259 260ifdef is_sdk_build 261ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 262$(error The 'sdk' target may not be specified with any other targets) 263endif 264 265# TODO: this should be eng I think. Since the sdk is built from the eng 266# variant. 267tags_to_install := user debug eng 268ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 269ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 270else # !sdk 271endif 272 273# build the full stagefright library 274ifneq ($(strip BUILD_WITH_FULL_STAGEFRIGHT),) 275BUILD_WITH_FULL_STAGEFRIGHT := true 276endif 277 278## precise GC ## 279 280ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 281 # Enabling type-precise GC results in larger optimized DEX files. The 282 # additional storage requirements for ".odex" files can cause /system 283 # to overflow on some devices, so this is configured separately for 284 # each product. 285 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 286endif 287 288# Install an apns-conf.xml file if one's not already being installed. 289ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 290 PRODUCT_COPY_FILES += \ 291 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 292 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 293 $(warning implicitly installing apns-conf_sdk.xml) 294 endif 295endif 296# If we're on an eng or tests build, but not on the sdk, and we have 297# a better one, use that instead. 298ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 299 ifndef is_sdk_build 300 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 301 ifneq ($(strip $(apns_to_use)),) 302 PRODUCT_COPY_FILES := \ 303 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 304 $(strip $(apns_to_use)):system/etc/apns-conf.xml 305 endif 306 endif 307endif 308 309ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 310 311# enable vm tracing in files for now to help track 312# the cause of ANRs in the content process 313ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 314 315# ------------------------------------------------------------ 316# Define a function that, given a list of module tags, returns 317# non-empty if that module should be installed in /system. 318 319# For most goals, anything not tagged with the "tests" tag should 320# be installed in /system. 321define should-install-to-system 322$(if $(filter tests,$(1)),,true) 323endef 324 325ifdef is_sdk_build 326# For the sdk goal, anything with the "samples" tag should be 327# installed in /data even if that module also has "eng"/"debug"/"user". 328define should-install-to-system 329$(if $(filter samples tests,$(1)),,true) 330endef 331endif 332 333 334# If they only used the modifier goals (showcommands, checkbuild), we'll actually 335# build the default target. 336ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),) 337.PHONY: $(INTERNAL_MODIFIER_TARGETS) 338$(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL) 339endif 340 341# These targets are going to delete stuff, don't bother including 342# the whole directory tree if that's all we're going to do 343ifeq ($(MAKECMDGOALS),clean) 344dont_bother := true 345endif 346ifeq ($(MAKECMDGOALS),clobber) 347dont_bother := true 348endif 349ifeq ($(MAKECMDGOALS),dataclean) 350dont_bother := true 351endif 352ifeq ($(MAKECMDGOALS),installclean) 353dont_bother := true 354endif 355 356# Bring in all modules that need to be built. 357ifneq ($(dont_bother),true) 358 359ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 360SDK_ONLY := true 361$(info Building the SDK under darwin-ppc is actually obsolete and unsupported.) 362$(error stop) 363endif 364 365ifeq ($(HOST_OS),windows) 366SDK_ONLY := true 367endif 368 369ifeq ($(SDK_ONLY),true) 370 371# ----- SDK for Windows ------ 372# These configure the build targets that are available for the SDK under Windows. 373# The first section defines all the C/C++ tools that can be compiled in C/C++, 374# the second section defines all the Java ones (assuming javac is available.) 375 376subdirs := \ 377 prebuilt \ 378 build/libs/host \ 379 build/tools/zipalign \ 380 dalvik/dexdump \ 381 dalvik/libdex \ 382 dalvik/tools/dmtracedump \ 383 dalvik/tools/hprof-conv \ 384 development/tools/line_endings \ 385 development/tools/etc1tool \ 386 sdk/emulator/mksdcard \ 387 sdk/sdklauncher \ 388 development/host \ 389 external/expat \ 390 external/libpng \ 391 external/qemu \ 392 external/sqlite/dist \ 393 external/zlib \ 394 frameworks/base \ 395 system/core/adb \ 396 system/core/fastboot \ 397 system/core/libcutils \ 398 system/core/liblog \ 399 system/core/libzipfile 400 401# The following can only be built if "javac" is available. 402# This check is used when building parts of the SDK under Cygwin. 403ifneq (,$(shell which javac 2>/dev/null)) 404subdirs += \ 405 build/tools/signapk \ 406 dalvik/dx \ 407 libcore \ 408 sdk/archquery \ 409 sdk/androidprefs \ 410 sdk/apkbuilder \ 411 sdk/jarutils \ 412 sdk/layoutlib_api \ 413 sdk/layoutlib_utils \ 414 sdk/ninepatch \ 415 sdk/sdkstats \ 416 sdk/sdkmanager \ 417 sdk/layoutopt \ 418 development/apps \ 419 development/tools/mkstubs \ 420 packages 421else 422$(warning SDK_ONLY: javac not available.) 423endif 424 425# Exclude tools/acp when cross-compiling windows under linux 426ifeq ($(findstring Linux,$(UNAME)),) 427subdirs += build/tools/acp 428endif 429 430else # !SDK_ONLY 431ifeq ($(BUILD_TINY_ANDROID), true) 432 433# TINY_ANDROID is a super-minimal build configuration, handy for board 434# bringup and very low level debugging 435 436subdirs := \ 437 bionic \ 438 system/core \ 439 build/libs \ 440 build/target \ 441 build/tools/acp \ 442 build/tools/apriori \ 443 build/tools/kcm \ 444 build/tools/soslim \ 445 external/elfcopy \ 446 external/elfutils \ 447 external/yaffs2 \ 448 external/zlib 449else # !BUILD_TINY_ANDROID 450 451# 452# Typical build; include any Android.mk files we can find. 453# 454subdirs := $(TOP) 455 456FULL_BUILD := true 457 458endif # !BUILD_TINY_ANDROID 459 460endif # !SDK_ONLY 461 462ifneq ($(ONE_SHOT_MAKEFILE),) 463# We've probably been invoked by the "mm" shell function 464# with a subdirectory's makefile. 465include $(ONE_SHOT_MAKEFILE) 466# Change CUSTOM_MODULES to include only modules that were 467# defined by this makefile; this will install all of those 468# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 469# so that the modules will be installed in the same place they 470# would have been with a normal make. 471CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS))) 472FULL_BUILD := 473# Stub out the notice targets, which probably aren't defined 474# when using ONE_SHOT_MAKEFILE. 475NOTICE-HOST-%: ; 476NOTICE-TARGET-%: ; 477 478else # ONE_SHOT_MAKEFILE 479 480# 481# Include all of the makefiles in the system 482# 483 484# Can't use first-makefiles-under here because 485# --mindepth=2 makes the prunes not work. 486subdir_makefiles := \ 487 $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk) 488 489include $(subdir_makefiles) 490endif # ONE_SHOT_MAKEFILE 491 492# ------------------------------------------------------------------- 493# All module makefiles have been included at this point. 494# ------------------------------------------------------------------- 495 496# ------------------------------------------------------------------- 497# Include any makefiles that must happen after the module makefiles 498# have been included. 499# TODO: have these files register themselves via a global var rather 500# than hard-coding the list here. 501ifdef FULL_BUILD 502 # Only include this during a full build, otherwise we can't be 503 # guaranteed that any policies were included. 504 -include frameworks/policies/base/PolicyConfig.mk 505endif 506 507# ------------------------------------------------------------------- 508# Fix up CUSTOM_MODULES to refer to installed files rather than 509# just bare module names. Leave unknown modules alone in case 510# they're actually full paths to a particular file. 511known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 512unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 513CUSTOM_MODULES := \ 514 $(call module-installed-files,$(known_custom_modules)) \ 515 $(unknown_custom_modules) 516 517# ------------------------------------------------------------------- 518# Define dependencies for modules that require other modules. 519# This can only happen now, after we've read in all module makefiles. 520# 521# TODO: deal with the fact that a bare module name isn't 522# unambiguous enough. Maybe declare short targets like 523# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 524# BUG: the system image won't know to depend on modules that are 525# brought in as requirements of other modules. 526define add-required-deps 527$(1): $(2) 528endef 529$(foreach m,$(ALL_MODULES), \ 530 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 531 $(if $(r), \ 532 $(eval r := $(call module-installed-files,$(r))) \ 533 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 534 ) \ 535 ) 536m := 537r := 538add-required-deps := 539 540# ------------------------------------------------------------------- 541# Figure out our module sets. 542 543# Of the modules defined by the component makefiles, 544# determine what we actually want to build. 545Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 546 $(CUSTOM_MODULES)) 547# TODO: Remove the 3 places in the tree that use 548# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 549 550ifdef FULL_BUILD 551 # The base list of modules to build for this product is specified 552 # by the appropriate product definition file, which was included 553 # by product_config.make. 554 user_PACKAGES := $(call module-installed-files, \ 555 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 556 ifeq (0,1) 557 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 558 $(foreach p,$(user_PACKAGES),$(info : $(p))) 559 $(error done) 560 endif 561else 562 # We're not doing a full build, and are probably only including 563 # a subset of the module makefiles. Don't try to build any modules 564 # requested by the product, because we probably won't have rules 565 # to build them. 566 user_PACKAGES := 567endif 568# Use tags to get the non-APPS user modules. Use the product 569# definition files to get the APPS user modules. 570user_MODULES := $(sort $(call get-tagged-modules,user)) 571user_MODULES := $(user_MODULES) $(user_PACKAGES) 572 573eng_MODULES := $(sort $(call get-tagged-modules,eng)) 574debug_MODULES := $(sort $(call get-tagged-modules,debug)) 575tests_MODULES := $(sort $(call get-tagged-modules,tests)) 576 577ifeq ($(strip $(tags_to_install)),) 578$(error ASSERTION FAILED: tags_to_install should not be empty) 579endif 580modules_to_install := $(sort $(Default_MODULES) \ 581 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 582 583# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 584# Filter out (do not install) any overridden packages. 585overridden_packages := $(call get-package-overrides,$(modules_to_install)) 586ifdef overridden_packages 587# old_modules_to_install := $(modules_to_install) 588 modules_to_install := \ 589 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 590 $(modules_to_install)) 591endif 592#$(error filtered out 593# $(filter-out $(modules_to_install),$(old_modules_to_install))) 594 595# Don't include any GNU targets in the SDK. It's ok (and necessary) 596# to build the host tools, but nothing that's going to be installed 597# on the target (including static libraries). 598ifdef is_sdk_build 599 target_gnu_MODULES := \ 600 $(filter \ 601 $(TARGET_OUT_INTERMEDIATES)/% \ 602 $(TARGET_OUT)/% \ 603 $(TARGET_OUT_DATA)/%, \ 604 $(sort $(call get-tagged-modules,gnu))) 605 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 606 modules_to_install := \ 607 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 608endif 609 610 611# build/core/Makefile contains extra stuff that we don't want to pollute this 612# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 613# contains everything that's built during the current make, but it also further 614# extends ALL_DEFAULT_INSTALLED_MODULES. 615ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 616include $(BUILD_SYSTEM)/Makefile 617modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 618ALL_DEFAULT_INSTALLED_MODULES := 619 620endif # dont_bother 621 622# These are additional goals that we build, in order to make sure that there 623# is as little code as possible in the tree that doesn't build. 624modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED)) 625 626# If you would like to build all goals, and not skip any intermediate 627# steps, you can pass the "all" modifier goal on the commandline. 628ifneq ($(filter all,$(MAKECMDGOALS)),) 629modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT)) 630endif 631 632# for easier debugging 633modules_to_check := $(sort $(modules_to_check)) 634#$(error modules_to_check $(modules_to_check)) 635 636# ------------------------------------------------------------------- 637# This is used to to get the ordering right, you can also use these, 638# but they're considered undocumented, so don't complain if their 639# behavior changes. 640.PHONY: prebuilt 641prebuilt: $(ALL_PREBUILT) 642 643# An internal target that depends on all copied headers 644# (see copy_headers.make). Other targets that need the 645# headers to be copied first can depend on this target. 646.PHONY: all_copied_headers 647all_copied_headers: ; 648 649$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 650 651# All the droid stuff, in directories 652.PHONY: files 653files: prebuilt \ 654 $(modules_to_install) \ 655 $(modules_to_check) \ 656 $(INSTALLED_ANDROID_INFO_TXT_TARGET) 657 658# ------------------------------------------------------------------- 659 660.PHONY: checkbuild 661checkbuild: $(modules_to_check) 662 663.PHONY: ramdisk 664ramdisk: $(INSTALLED_RAMDISK_TARGET) 665 666.PHONY: systemtarball 667systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 668 669.PHONY: userdataimage 670userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 671 672.PHONY: userdatatarball 673userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 674 675.PHONY: bootimage 676bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 677 678ifeq ($(BUILD_TINY_ANDROID), true) 679INSTALLED_RECOVERYIMAGE_TARGET := 680endif 681 682# Build files and then package it into the rom formats 683.PHONY: droidcore 684droidcore: files \ 685 systemimage \ 686 $(INSTALLED_BOOTIMAGE_TARGET) \ 687 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 688 $(INSTALLED_USERDATAIMAGE_TARGET) \ 689 $(INSTALLED_FILES_FILE) 690 691# The actual files built by the droidcore target changes depending 692# on the build variant. 693.PHONY: droid tests 694droid tests: droidcore 695 696# Dist for droid if droid is among the cmd goals, or no cmd goal is given. 697ifneq ($(filter droid,$(MAKECMDGOALS))$(filter ||,|$(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))|),) 698$(call dist-for-goals, droid, \ 699 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 700 $(INTERNAL_OTA_PACKAGE_TARGET) \ 701 $(SYMBOLS_ZIP) \ 702 $(APPS_ZIP) \ 703 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 704 $(PACKAGE_STATS_FILE) \ 705 $(INSTALLED_FILES_FILE) \ 706 $(INSTALLED_BUILD_PROP_TARGET) \ 707 $(BUILT_TARGET_FILES_PACKAGE) \ 708 $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ 709 $(INSTALLED_RAMDISK_TARGET) \ 710 ) 711 712ifeq ($(EMMA_INSTRUMENT),true) 713$(call dist-for-goals, droid, \ 714 $(EMMA_META_ZIP) \ 715 ) 716endif # EMMA_INSTRUMENT 717 718# Tests are installed in userdata.img. If we're building the tests 719# variant, copy it for "make tests dist". Also copy a zip of the 720# contents of userdata.img, so that people can easily extract a 721# single .apk. 722ifeq ($(TARGET_BUILD_VARIANT),tests) 723$(call dist-for-goals, droid, \ 724 $(INSTALLED_USERDATAIMAGE_TARGET) \ 725 $(BUILT_TESTS_ZIP_PACKAGE) \ 726 ) 727endif # tests 728endif # droid in $(MAKECMDGOALS) 729 730.PHONY: docs 731docs: $(ALL_DOCS) 732 733.PHONY: sdk 734ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 735sdk: $(ALL_SDK_TARGETS) 736ifneq ($(filter sdk,$(MAKECMDGOALS)),) 737$(call dist-for-goals,sdk, \ 738 $(ALL_SDK_TARGETS) \ 739 $(SYMBOLS_ZIP) \ 740 ) 741endif 742 743.PHONY: samplecode 744sample_MODULES := $(sort $(call get-tagged-modules,samples)) 745sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples 746sample_APKS_COLLECTION := \ 747 $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module))) 748$(foreach module,$(sample_MODULES),$(eval $(call \ 749 copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module))))) 750sample_ADDITIONAL_INSTALLED := \ 751 $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES)) 752samplecode: $(sample_APKS_COLLECTION) 753 @echo "Collect sample code apks: $^" 754 # remove apks that are not intended to be installed. 755 rm -f $(sample_ADDITIONAL_INSTALLED) 756 757.PHONY: findbugs 758findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 759 760.PHONY: clean 761dirs_to_clean := \ 762 $(PRODUCT_OUT) \ 763 $(TARGET_COMMON_OUT_ROOT) \ 764 $(HOST_OUT) \ 765 $(HOST_COMMON_OUT_ROOT) 766clean: 767 @for dir in $(dirs_to_clean) ; do \ 768 echo "Cleaning $$dir..."; \ 769 rm -rf $$dir; \ 770 done 771 @echo "Clean."; \ 772 773.PHONY: clobber 774clobber: 775 @rm -rf $(OUT_DIR) 776 @echo "Entire build directory removed." 777 778# The rules for dataclean and installclean are defined in cleanbuild.mk. 779 780#xxx scrape this from ALL_MODULE_NAME_TAGS 781.PHONY: modules 782modules: 783 @echo "Available sub-modules:" 784 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 785 tr -s ' ' '\n' | sort -u | $(COLUMN) 786 787.PHONY: showcommands 788showcommands: 789 @echo >/dev/null 790