main.mk revision f3e79f904198f69ca2a954c4750a174c41d1c7a2
1 2# Use bash, not whatever shell somebody has installed as /bin/sh 3# This is repeated in config.mk, since envsetup.sh runs that file 4# directly. 5SHELL := /bin/bash 6 7# this turns off the suffix rules built into make 8.SUFFIXES: 9 10# If a rule fails, delete $@. 11.DELETE_ON_ERROR: 12 13# Figure out where we are. 14#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 15#TOP := $(patsubst %/,%,$(TOP)) 16 17# TOPDIR is the normal variable you should use, because 18# if we are executing relative to the current directory 19# it can be "", whereas TOP must be "." which causes 20# pattern matching probles when make strips off the 21# trailing "./" from paths in various places. 22#ifeq ($(TOP),.) 23#TOPDIR := 24#else 25#TOPDIR := $(TOP)/ 26#endif 27 28# check for broken versions of make 29ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 30$(warning ********************************************************************************) 31$(warning * You are using version $(MAKE_VERSION) of make.) 32$(warning * You must upgrade to version 3.81 or greater.) 33$(warning * see file://$(shell pwd)/docs/development-environment/machine-setup.html) 34$(warning ********************************************************************************) 35$(error stopping) 36endif 37 38TOP := . 39TOPDIR := 40 41BUILD_SYSTEM := $(TOPDIR)build/core 42 43# This is the default target. It must be the first declared target. 44DEFAULT_GOAL := droid 45$(DEFAULT_GOAL): 46 47# Set up various standard variables based on configuration 48# and host information. 49include $(BUILD_SYSTEM)/config.mk 50 51# This allows us to force a clean build - included after the config.make 52# environment setup is done, but before we generate any dependencies. This 53# file does the rm -rf inline so the deps which are all done below will 54# be generated correctly 55include $(BUILD_SYSTEM)/cleanbuild.mk 56 57ifneq ($(HOST_OS),windows) 58ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 59# check for a case sensitive file system 60ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 61 echo a > $(OUT_DIR)/casecheck.txt; \ 62 echo B > $(OUT_DIR)/CaseCheck.txt; \ 63 cat $(OUT_DIR)/casecheck.txt)) 64$(warning ************************************************************) 65$(warning You are building on a case-insensitive filesystem.) 66$(warning Please move your source tree to a case-sensitive filesystem.) 67$(warning ************************************************************) 68$(error Case-insensitive filesystems not supported) 69endif 70endif 71endif 72 73# Make sure that there are no spaces in the absolute path; the 74# build system can't deal with them. 75ifneq ($(words $(shell pwd)),1) 76$(warning ************************************************************) 77$(warning You are building in a directory whose absolute path contains) 78$(warning a space character:) 79$(warning $(space)) 80$(warning "$(shell pwd)") 81$(warning $(space)) 82$(warning Please move your source tree to a path that does not contain) 83$(warning any spaces.) 84$(warning ************************************************************) 85$(error Directory names containing spaces not supported) 86endif 87 88# Set up version information. 89include $(BUILD_SYSTEM)/version_defaults.mk 90 91# These are the modifier targets that don't do anything themselves, but 92# change the behavior of the build. 93# (must be defined before including definitions.make) 94INTERNAL_MODIFIER_TARGETS := showcommands 95 96# Bring in standard build system definitions. 97include $(BUILD_SYSTEM)/definitions.mk 98 99ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 100$(info ***************************************************************) 101$(info ***************************************************************) 102$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 103 the make command line.) 104# XXX The single quote on this line fixes gvim's syntax highlighting. 105# Without which, the rest of this file is impossible to read. 106$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 107$(info choosecombo.) 108$(info ***************************************************************) 109$(info ***************************************************************) 110$(error stopping) 111endif 112 113ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 114$(info ***************************************************************) 115$(info ***************************************************************) 116$(info Invalid variant: $(TARGET_BUILD_VARIANT) 117$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 118$(info ***************************************************************) 119$(info ***************************************************************) 120$(error stopping) 121endif 122 123### 124### In this section we set up the things that are different 125### between the build variants 126### 127 128## user/userdebug ## 129 130user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 131enable_target_debugging := true 132ifneq (,$(user_variant)) 133 # Target is secure in user builds. 134 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 135 136 tags_to_install := user 137 ifeq ($(user_variant),userdebug) 138 # Pick up some extra useful tools 139 tags_to_install += debug 140 else 141 # Disable debugging in plain user builds. 142 enable_target_debugging := 143 endif 144 145 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 146 # Also, remove the corresponding block in config/product_config.make. 147 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 148 WITH_DEXPREOPT := true 149 endif 150 151 # Disallow mock locations by default for user builds 152 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 153 154else # !user_variant 155 # Turn on checkjni for non-user builds. 156 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 157 # Set device insecure for non-user builds. 158 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 159 # Allow mock locations by default for non user builds 160 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 161endif # !user_variant 162 163ifeq (true,$(strip $(enable_target_debugging))) 164 # Target is more debuggable and adbd is on by default 165 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 166 # Include the debugging/testing OTA keys in this build. 167 INCLUDE_TEST_OTA_KEYS := true 168else # !enable_target_debugging 169 # Target is less debuggable and adbd is off by default 170 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 171endif # !enable_target_debugging 172 173## eng ## 174 175ifeq ($(TARGET_BUILD_VARIANT),eng) 176tags_to_install := user debug eng 177 # Don't require the setup wizard on eng builds 178 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 179 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) 180endif 181 182## tests ## 183 184ifeq ($(TARGET_BUILD_VARIANT),tests) 185tags_to_install := user debug eng tests 186endif 187 188## sdk ## 189 190ifneq ($(filter sdk,$(MAKECMDGOALS)),) 191ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 192$(error The 'sdk' target may not be specified with any other targets) 193endif 194# TODO: this should be eng I think. Since the sdk is built from the eng 195# variant. 196tags_to_install := user debug eng 197ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 198ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 199else # !sdk 200# Enable sync for non-sdk builds only (sdk builds lack SubscribedFeedsProvider). 201ADDITIONAL_BUILD_PROPERTIES += ro.config.sync=yes 202endif 203 204# Install an apns-conf.xml file if one's not already being installed. 205ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 206 PRODUCT_COPY_FILES += \ 207 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 208 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 209 $(warning implicitly installing apns-conf_sdk.xml) 210 endif 211endif 212# If we're on an eng or tests build, but not on the sdk, and we have 213# a better one, use that instead. 214ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 215 ifeq ($(filter sdk,$(MAKECMDGOALS)),) 216 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 217 ifneq ($(strip $(apns_to_use)),) 218 PRODUCT_COPY_FILES := \ 219 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 220 $(strip $(apns_to_use)):system/etc/apns-conf.xml 221 endif 222 endif 223endif 224 225ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 226 227# enable vm tracing in files for now to help track 228# the cause of ANRs in the content process 229ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 230 231 232# ------------------------------------------------------------ 233# Define a function that, given a list of module tags, returns 234# non-empty if that module should be installed in /system. 235 236# For most goals, anything not tagged with the "tests" tag should 237# be installed in /system. 238define should-install-to-system 239$(if $(filter tests,$(1)),,true) 240endef 241 242ifneq (,$(filter sdk,$(MAKECMDGOALS))) 243# For the sdk goal, anything with the "samples" tag should be 244# installed in /data even if that module also has "eng"/"debug"/"user". 245define should-install-to-system 246$(if $(filter samples tests,$(1)),,true) 247endef 248endif 249 250 251# If all they typed was make showcommands, we'll actually build 252# the default target. 253ifeq ($(MAKECMDGOALS),showcommands) 254.PHONY: showcommands 255showcommands: $(DEFAULT_GOAL) 256endif 257 258# These targets are going to delete stuff, don't bother including 259# the whole directory tree if that's all we're going to do 260ifeq ($(MAKECMDGOALS),clean) 261dont_bother := true 262endif 263ifeq ($(MAKECMDGOALS),clobber) 264dont_bother := true 265endif 266ifeq ($(MAKECMDGOALS),dataclean) 267dont_bother := true 268endif 269ifeq ($(MAKECMDGOALS),installclean) 270dont_bother := true 271endif 272 273# Bring in all modules that need to be built. 274ifneq ($(dont_bother),true) 275 276subdir_makefiles := 277 278ifeq ($(HOST_OS),windows) 279SDK_ONLY := true 280endif 281ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 282SDK_ONLY := true 283endif 284 285ifeq ($(SDK_ONLY),true) 286 287subdirs := \ 288 prebuilt \ 289 build/libs/host \ 290 dalvik/dexdump \ 291 dalvik/libdex \ 292 dalvik/tools/dmtracedump \ 293 dalvik/tools/hprof-conv \ 294 development/emulator/mksdcard \ 295 development/tools/activitycreator \ 296 development/tools/line_endings \ 297 development/host \ 298 external/expat \ 299 external/libpng \ 300 external/qemu \ 301 external/sqlite/dist \ 302 external/zlib \ 303 frameworks/base/libs/utils \ 304 frameworks/base/tools/aapt \ 305 frameworks/base/tools/aidl \ 306 system/core/adb \ 307 system/core/fastboot \ 308 system/core/libcutils \ 309 system/core/liblog \ 310 system/core/libzipfile 311 312# The following can only be built if "javac" is available. 313# This check is used when building parts of the SDK under Cygwin. 314ifneq (,$(shell which javac 2>/dev/null)) 315$(warning sdk-only: javac available.) 316subdirs += \ 317 build/tools/signapk \ 318 build/tools/zipalign \ 319 dalvik/dx \ 320 dalvik/libcore \ 321 development/apps \ 322 development/tools/androidprefs \ 323 development/tools/apkbuilder \ 324 development/tools/jarutils \ 325 development/tools/layoutlib_utils \ 326 development/tools/ninepatch \ 327 development/tools/sdkstats \ 328 development/tools/sdkmanager \ 329 frameworks/base \ 330 frameworks/base/tools/layoutlib \ 331 external/googleclient \ 332 packages 333else 334$(warning sdk-only: javac not available.) 335endif 336 337# Exclude tools/acp when cross-compiling windows under linux 338ifeq ($(findstring Linux,$(UNAME)),) 339subdirs += build/tools/acp 340endif 341 342else # !SDK_ONLY 343ifeq ($(BUILD_TINY_ANDROID), true) 344 345# TINY_ANDROID is a super-minimal build configuration, handy for board 346# bringup and very low level debugging 347 348INTERNAL_DEFAULT_DOCS_TARGETS := 349 350subdirs := \ 351 bionic \ 352 system/core \ 353 build/libs \ 354 build/target \ 355 build/tools/acp \ 356 build/tools/apriori \ 357 build/tools/kcm \ 358 build/tools/soslim \ 359 external/elfcopy \ 360 external/elfutils \ 361 external/yaffs2 \ 362 external/zlib 363else # !BUILD_TINY_ANDROID 364 365# 366# Typical build; include any Android.mk files we can find. 367# 368INTERNAL_DEFAULT_DOCS_TARGETS := offline-sdk-docs 369subdirs := $(TOP) 370 371FULL_BUILD := true 372 373endif # !BUILD_TINY_ANDROID 374 375endif # !SDK_ONLY 376 377# Can't use first-makefiles-under here because 378# --mindepth=2 makes the prunes not work. 379subdir_makefiles += \ 380 $(shell build/tools/findleaves.sh --prune="./out" $(subdirs) Android.mk) 381 382# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE) 383# or under vendor/*/$(TARGET_DEVICE). Search in both places, but 384# make sure only one exists. 385# Real boards should always be associated with an OEM vendor. 386board_config_mk := \ 387 $(strip $(wildcard \ 388 $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \ 389 vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \ 390 )) 391ifeq ($(board_config_mk),) 392 $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE)) 393endif 394ifneq ($(words $(board_config_mk)),1) 395 $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk)) 396endif 397include $(board_config_mk) 398TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk))) 399board_config_mk := 400 401# Clean up/verify variables defined by the board config file. 402TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME)) 403 404# 405# Include all of the makefiles in the system 406# 407 408ifneq ($(ONE_SHOT_MAKEFILE),) 409# We've probably been invoked by the "mm" shell function 410# with a subdirectory's makefile. 411include $(ONE_SHOT_MAKEFILE) 412# Change CUSTOM_MODULES to include only modules that were 413# defined by this makefile; this will install all of those 414# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 415# so that the modules will be installed in the same place they 416# would have been with a normal make. 417CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS),)) 418FULL_BUILD := 419INTERNAL_DEFAULT_DOCS_TARGETS := 420# Stub out the notice targets, which probably aren't defined 421# when using ONE_SHOT_MAKEFILE. 422NOTICE-HOST-%: ; 423NOTICE-TARGET-%: ; 424else 425include $(subdir_makefiles) 426endif 427# ------------------------------------------------------------------- 428# All module makefiles have been included at this point. 429# ------------------------------------------------------------------- 430 431# ------------------------------------------------------------------- 432# Include any makefiles that must happen after the module makefiles 433# have been included. 434# TODO: have these files register themselves via a global var rather 435# than hard-coding the list here. 436ifdef FULL_BUILD 437 # Only include this during a full build, otherwise we can't be 438 # guaranteed that any policies were included. 439 -include frameworks/policies/base/PolicyConfig.mk 440endif 441 442# ------------------------------------------------------------------- 443# Fix up CUSTOM_MODULES to refer to installed files rather than 444# just bare module names. Leave unknown modules alone in case 445# they're actually full paths to a particular file. 446known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 447unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 448CUSTOM_MODULES := \ 449 $(call module-installed-files,$(known_custom_modules)) \ 450 $(unknown_custom_modules) 451 452# ------------------------------------------------------------------- 453# Define dependencies for modules that require other modules. 454# This can only happen now, after we've read in all module makefiles. 455# 456# TODO: deal with the fact that a bare module name isn't 457# unambiguous enough. Maybe declare short targets like 458# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 459# BUG: the system image won't know to depend on modules that are 460# brought in as requirements of other modules. 461define add-required-deps 462$(1): $(2) 463endef 464$(foreach m,$(ALL_MODULES), \ 465 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 466 $(if $(r), \ 467 $(eval r := $(call module-installed-files,$(r))) \ 468 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 469 ) \ 470 ) 471m := 472r := 473add-required-deps := 474 475# ------------------------------------------------------------------- 476# Figure out our module sets. 477 478# Of the modules defined by the component makefiles, 479# determine what we actually want to build. 480# If a module has the "restricted" tag on it, it 481# poisons the rest of the tags and shouldn't appear 482# on any list. 483Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 484 $(ALL_BUILT_MODULES) \ 485 $(CUSTOM_MODULES)) 486# TODO: Remove the 3 places in the tree that use 487# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 488 489ifdef FULL_BUILD 490 # The base list of modules to build for this product is specified 491 # by the appropriate product definition file, which was included 492 # by product_config.make. 493 user_PACKAGES := $(call module-installed-files, \ 494 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 495 ifeq (0,1) 496 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 497 $(foreach p,$(user_PACKAGES),$(info : $(p))) 498 $(error done) 499 endif 500else 501 # We're not doing a full build, and are probably only including 502 # a subset of the module makefiles. Don't try to build any modules 503 # requested by the product, because we probably won't have rules 504 # to build them. 505 user_PACKAGES := 506endif 507# Use tags to get the non-APPS user modules. Use the product 508# definition files to get the APPS user modules. 509user_MODULES := $(sort $(call get-tagged-modules,user,_class@APPS restricted)) 510user_MODULES := $(user_MODULES) $(user_PACKAGES) 511 512eng_MODULES := $(sort $(call get-tagged-modules,eng,restricted)) 513debug_MODULES := $(sort $(call get-tagged-modules,debug,restricted)) 514tests_MODULES := $(sort $(call get-tagged-modules,tests,restricted)) 515 516ifeq ($(strip $(tags_to_install)),) 517$(error ASSERTION FAILED: tags_to_install should not be empty) 518endif 519modules_to_install := $(sort $(Default_MODULES) \ 520 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 521 522# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 523# Filter out (do not install) any overridden packages. 524overridden_packages := $(call get-package-overrides,$(modules_to_install)) 525ifdef overridden_packages 526# old_modules_to_install := $(modules_to_install) 527 modules_to_install := \ 528 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 529 $(modules_to_install)) 530endif 531#$(error filtered out 532# $(filter-out $(modules_to_install),$(old_modules_to_install))) 533 534# Don't include any GNU targets in the SDK. It's ok (and necessary) 535# to build the host tools, but nothing that's going to be installed 536# on the target (including static libraries). 537ifneq ($(filter sdk,$(MAKECMDGOALS)),) 538 target_gnu_MODULES := \ 539 $(filter \ 540 $(TARGET_OUT_INTERMEDIATES)/% \ 541 $(TARGET_OUT)/% \ 542 $(TARGET_OUT_DATA)/%, \ 543 $(sort $(call get-tagged-modules,gnu))) 544 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 545 modules_to_install := \ 546 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 547endif 548 549 550# config/Makefile contains extra stuff that we don't want to pollute this 551# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 552# contains everything that's built during the current make, but it also further 553# extends ALL_DEFAULT_INSTALLED_MODULES. 554ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 555include $(BUILD_SYSTEM)/Makefile 556modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 557ALL_DEFAULT_INSTALLED_MODULES := 558 559endif # dont_bother 560 561# ------------------------------------------------------------------- 562# This is used to to get the ordering right, you can also use these, 563# but they're considered undocumented, so don't complain if their 564# behavior changes. 565.PHONY: prebuilt 566prebuilt: $(ALL_PREBUILT) 567 568# An internal target that depends on all copied headers 569# (see copy_headers.make). Other targets that need the 570# headers to be copied first can depend on this target. 571.PHONY: all_copied_headers 572all_copied_headers: ; 573 574$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 575 576# All the droid stuff, in directories 577.PHONY: files 578files: prebuilt $(modules_to_install) $(INSTALLED_ANDROID_INFO_TXT_TARGET) 579 580# ------------------------------------------------------------------- 581 582.PHONY: ramdisk 583ramdisk: $(INSTALLED_RAMDISK_TARGET) 584 585.PHONY: systemtarball 586systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 587 588.PHONY: userdataimage 589userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 590 591.PHONY: userdatatarball 592userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 593 594.PHONY: bootimage 595bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 596 597ifeq ($(BUILD_TINY_ANDROID), true) 598INSTALLED_RECOVERYIMAGE_TARGET := 599endif 600 601# Build files and then package it into the rom formats 602.PHONY: droidcore 603droidcore: files \ 604 systemimage \ 605 $(INSTALLED_BOOTIMAGE_TARGET) \ 606 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 607 $(INSTALLED_USERDATAIMAGE_TARGET) \ 608 $(INTERNAL_DEFAULT_DOCS_TARGETS) \ 609 $(INSTALLED_FILES_FILE) 610 611# The actual files built by the droidcore target changes depending 612# on the build variant. 613.PHONY: droid tests 614droid tests: droidcore 615 616$(call dist-for-goals, droid, \ 617 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 618 $(INTERNAL_OTA_PACKAGE_TARGET) \ 619 $(SYMBOLS_ZIP) \ 620 $(APPS_ZIP) \ 621 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 622 $(PACKAGE_STATS_FILE) \ 623 $(INSTALLED_FILES_FILE) \ 624 $(INSTALLED_BUILD_PROP_TARGET) \ 625 $(BUILT_TARGET_FILES_PACKAGE) \ 626 ) 627 628# Tests are installed in userdata.img. If we're building the tests 629# variant, copy it for "make tests dist". Also copy a zip of the 630# contents of userdata.img, so that people can easily extract a 631# single .apk. 632ifeq ($(TARGET_BUILD_VARIANT),tests) 633$(call dist-for-goals, droid, \ 634 $(INSTALLED_USERDATAIMAGE_TARGET) \ 635 $(BUILT_TESTS_ZIP_PACKAGE) \ 636 ) 637endif 638 639.PHONY: docs 640docs: $(ALL_DOCS) 641 642.PHONY: sdk 643ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 644sdk: $(ALL_SDK_TARGETS) 645$(call dist-for-goals,sdk,$(ALL_SDK_TARGETS)) 646 647.PHONY: findbugs 648findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 649 650.PHONY: clean 651dirs_to_clean := \ 652 $(PRODUCT_OUT) \ 653 $(TARGET_COMMON_OUT_ROOT) \ 654 $(HOST_OUT) \ 655 $(HOST_COMMON_OUT_ROOT) 656clean: 657 @for dir in $(dirs_to_clean) ; do \ 658 echo "Cleaning $$dir..."; \ 659 rm -rf $$dir; \ 660 done 661 @echo "Clean."; \ 662 663.PHONY: clobber 664clobber: 665 @rm -rf $(OUT_DIR) 666 @echo "Entire build directory removed." 667 668# The rules for dataclean and installclean are defined in cleanbuild.mk. 669 670#xxx scrape this from ALL_MODULE_NAME_TAGS 671.PHONY: modules 672modules: 673 @echo "Available sub-modules:" 674 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 675 sed -e 's/ */\n/g' | sort -u | $(COLUMN) 676 677.PHONY: showcommands 678showcommands: 679 @echo >/dev/null 680 681