main.mk revision f9cd36a0f71c78e20f5ff24f9dd48af17d741cb6
1# Only use ANDROID_BUILD_SHELL to wrap around bash. 2# DO NOT use other shells such as zsh. 3ifdef ANDROID_BUILD_SHELL 4SHELL := $(ANDROID_BUILD_SHELL) 5else 6# Use bash, not whatever shell somebody has installed as /bin/sh 7# This is repeated in config.mk, since envsetup.sh runs that file 8# directly. 9SHELL := /bin/bash 10endif 11 12# this turns off the suffix rules built into make 13.SUFFIXES: 14 15# If a rule fails, delete $@. 16.DELETE_ON_ERROR: 17 18# Figure out where we are. 19#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) 20#TOP := $(patsubst %/,%,$(TOP)) 21 22# TOPDIR is the normal variable you should use, because 23# if we are executing relative to the current directory 24# it can be "", whereas TOP must be "." which causes 25# pattern matching probles when make strips off the 26# trailing "./" from paths in various places. 27#ifeq ($(TOP),.) 28#TOPDIR := 29#else 30#TOPDIR := $(TOP)/ 31#endif 32 33# check for broken versions of make 34ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) 35$(warning ********************************************************************************) 36$(warning * You are using version $(MAKE_VERSION) of make.) 37$(warning * You must upgrade to version 3.81 or greater.) 38$(warning * see http://source.android.com/download) 39$(warning ********************************************************************************) 40$(error stopping) 41endif 42 43TOP := . 44TOPDIR := 45 46BUILD_SYSTEM := $(TOPDIR)build/core 47 48# This is the default target. It must be the first declared target. 49.PHONY: droid 50DEFAULT_GOAL := droid 51$(DEFAULT_GOAL): 52 53# Used to force goals to build. Only use for conditionally defined goals. 54.PHONY: FORCE 55FORCE: 56 57# Set up various standard variables based on configuration 58# and host information. 59include $(BUILD_SYSTEM)/config.mk 60 61# This allows us to force a clean build - included after the config.make 62# environment setup is done, but before we generate any dependencies. This 63# file does the rm -rf inline so the deps which are all done below will 64# be generated correctly 65include $(BUILD_SYSTEM)/cleanbuild.mk 66 67VERSION_CHECK_SEQUENCE_NUMBER := 1 68-include $(OUT_DIR)/versions_checked.mk 69ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED)) 70 71$(info Checking build tools versions...) 72 73ifneq ($(HOST_OS),windows) 74ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 75# check for a case sensitive file system 76ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ 77 echo a > $(OUT_DIR)/casecheck.txt; \ 78 echo B > $(OUT_DIR)/CaseCheck.txt; \ 79 cat $(OUT_DIR)/casecheck.txt)) 80$(warning ************************************************************) 81$(warning You are building on a case-insensitive filesystem.) 82$(warning Please move your source tree to a case-sensitive filesystem.) 83$(warning ************************************************************) 84$(error Case-insensitive filesystems not supported) 85endif 86endif 87endif 88 89# Make sure that there are no spaces in the absolute path; the 90# build system can't deal with them. 91ifneq ($(words $(shell pwd)),1) 92$(warning ************************************************************) 93$(warning You are building in a directory whose absolute path contains) 94$(warning a space character:) 95$(warning $(space)) 96$(warning "$(shell pwd)") 97$(warning $(space)) 98$(warning Please move your source tree to a path that does not contain) 99$(warning any spaces.) 100$(warning ************************************************************) 101$(error Directory names containing spaces not supported) 102endif 103 104 105# The windows build server currently uses 1.6. This will be fixed. 106ifneq ($(HOST_OS),windows) 107 108# Check for the correct version of java 109java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 110ifeq ($(strip $(java_version)),) 111$(info ************************************************************) 112$(info You are attempting to build with the incorrect version) 113$(info of java.) 114$(info $(space)) 115$(info Your version is: $(shell java -version 2>&1 | head -n 1).) 116$(info The correct version is: 1.5.) 117$(info $(space)) 118$(info Please follow the machine setup instructions at) 119$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 120$(info ************************************************************) 121#$(error stop) 122endif 123 124# Check for the correct version of javac 125javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.5[\. "$$]') 126ifeq ($(strip $(javac_version)),) 127$(info ************************************************************) 128$(info You are attempting to build with the incorrect version) 129$(info of javac.) 130$(info $(space)) 131$(info Your version is: $(shell javac -version 2>&1 | head -n 1).) 132$(info The correct version is: 1.5.) 133$(info $(space)) 134$(info Please follow the machine setup instructions at) 135$(info $(space)$(space)$(space)$(space)http://source.android.com/download) 136$(info ************************************************************) 137#$(error stop) 138endif 139 140endif # windows 141 142$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \ 143 > $(OUT_DIR)/versions_checked.mk) 144endif 145 146# These are the modifier targets that don't do anything themselves, but 147# change the behavior of the build. 148# (must be defined before including definitions.make) 149INTERNAL_MODIFIER_TARGETS := showcommands checkbuild 150 151# Bring in standard build system definitions. 152include $(BUILD_SYSTEM)/definitions.mk 153 154ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) 155$(info ***************************************************************) 156$(info ***************************************************************) 157$(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ 158 the make command line.) 159# XXX The single quote on this line fixes gvim's syntax highlighting. 160# Without which, the rest of this file is impossible to read. 161$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) 162$(info choosecombo.) 163$(info ***************************************************************) 164$(info ***************************************************************) 165$(error stopping) 166endif 167 168ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) 169$(info ***************************************************************) 170$(info ***************************************************************) 171$(info Invalid variant: $(TARGET_BUILD_VARIANT) 172$(info Valid values are: $(INTERNAL_VALID_VARIANTS) 173$(info ***************************************************************) 174$(info ***************************************************************) 175$(error stopping) 176endif 177 178### 179### In this section we set up the things that are different 180### between the build variants 181### 182 183is_sdk_build := 184ifneq ($(filter sdk,$(MAKECMDGOALS)),) 185is_sdk_build := true 186endif 187ifneq ($(filter win_sdk,$(MAKECMDGOALS)),) 188is_sdk_build := true 189endif 190ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) 191is_sdk_build := true 192endif 193 194 195## user/userdebug ## 196 197user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) 198enable_target_debugging := true 199ifneq (,$(user_variant)) 200 # Target is secure in user builds. 201 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 202 203 tags_to_install := user 204 ifeq ($(user_variant),userdebug) 205 # Pick up some extra useful tools 206 tags_to_install += debug 207 208 # Enable Dalvik lock contention logging for userdebug builds. 209 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500 210 else 211 # Disable debugging in plain user builds. 212 enable_target_debugging := 213 endif 214 215 # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. 216 # Also, remove the corresponding block in config/product_config.make. 217 ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) 218 WITH_DEXPREOPT := true 219 endif 220 221 # Disallow mock locations by default for user builds 222 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 223 224else # !user_variant 225 # Turn on checkjni for non-user builds. 226 ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 227 # Set device insecure for non-user builds. 228 ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 229 # Allow mock locations by default for non user builds 230 ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 231endif # !user_variant 232 233ifeq (true,$(strip $(enable_target_debugging))) 234 # Target is more debuggable and adbd is on by default 235 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 236 # Include the debugging/testing OTA keys in this build. 237 INCLUDE_TEST_OTA_KEYS := true 238else # !enable_target_debugging 239 # Target is less debuggable and adbd is off by default 240 ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 241endif # !enable_target_debugging 242 243## eng ## 244 245ifeq ($(TARGET_BUILD_VARIANT),eng) 246tags_to_install := user debug eng 247 # Don't require the setup wizard on eng builds 248 ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ 249 $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \ 250 ro.setupwizard.mode=OPTIONAL 251endif 252 253## tests ## 254 255ifeq ($(TARGET_BUILD_VARIANT),tests) 256tags_to_install := user debug eng tests 257endif 258 259## sdk ## 260 261ifdef is_sdk_build 262ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) 263$(error The 'sdk' target may not be specified with any other targets) 264endif 265 266# TODO: this should be eng I think. Since the sdk is built from the eng 267# variant. 268tags_to_install := user debug eng 269ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true 270ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes 271else # !sdk 272endif 273 274# build the full stagefright library 275ifneq ($(strip BUILD_WITH_FULL_STAGEFRIGHT),) 276BUILD_WITH_FULL_STAGEFRIGHT := true 277endif 278 279## precise GC ## 280 281ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) 282 # Enabling type-precise GC results in larger optimized DEX files. The 283 # additional storage requirements for ".odex" files can cause /system 284 # to overflow on some devices, so this is configured separately for 285 # each product. 286 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y 287endif 288 289# Install an apns-conf.xml file if one's not already being installed. 290ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) 291 PRODUCT_COPY_FILES += \ 292 development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml 293 ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 294 $(warning implicitly installing apns-conf_sdk.xml) 295 endif 296endif 297# If we're on an eng or tests build, but not on the sdk, and we have 298# a better one, use that instead. 299ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) 300 ifndef is_sdk_build 301 apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) 302 ifneq ($(strip $(apns_to_use)),) 303 PRODUCT_COPY_FILES := \ 304 $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ 305 $(strip $(apns_to_use)):system/etc/apns-conf.xml 306 endif 307 endif 308endif 309 310ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android 311 312# enable vm tracing in files for now to help track 313# the cause of ANRs in the content process 314ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt 315 316# ------------------------------------------------------------ 317# Define a function that, given a list of module tags, returns 318# non-empty if that module should be installed in /system. 319 320# For most goals, anything not tagged with the "tests" tag should 321# be installed in /system. 322define should-install-to-system 323$(if $(filter tests,$(1)),,true) 324endef 325 326ifdef is_sdk_build 327# For the sdk goal, anything with the "samples" tag should be 328# installed in /data even if that module also has "eng"/"debug"/"user". 329define should-install-to-system 330$(if $(filter samples tests,$(1)),,true) 331endef 332endif 333 334 335# If they only used the modifier goals (showcommands, checkbuild), we'll actually 336# build the default target. 337ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),) 338.PHONY: $(INTERNAL_MODIFIER_TARGETS) 339$(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL) 340endif 341 342# These targets are going to delete stuff, don't bother including 343# the whole directory tree if that's all we're going to do 344ifeq ($(MAKECMDGOALS),clean) 345dont_bother := true 346endif 347ifeq ($(MAKECMDGOALS),clobber) 348dont_bother := true 349endif 350ifeq ($(MAKECMDGOALS),dataclean) 351dont_bother := true 352endif 353ifeq ($(MAKECMDGOALS),installclean) 354dont_bother := true 355endif 356 357# Bring in all modules that need to be built. 358ifneq ($(dont_bother),true) 359 360ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) 361SDK_ONLY := true 362$(info Building the SDK under darwin-ppc is actually obsolete and unsupported.) 363$(error stop) 364endif 365 366ifeq ($(HOST_OS),windows) 367SDK_ONLY := true 368endif 369 370ifeq ($(SDK_ONLY),true) 371 372# ----- SDK for Windows ------ 373# These configure the build targets that are available for the SDK under Windows. 374# The first section defines all the C/C++ tools that can be compiled in C/C++, 375# the second section defines all the Java ones (assuming javac is available.) 376 377subdirs := \ 378 prebuilt \ 379 build/libs/host \ 380 build/tools/zipalign \ 381 dalvik/dexdump \ 382 dalvik/libdex \ 383 dalvik/tools/dmtracedump \ 384 dalvik/tools/hprof-conv \ 385 development/tools/line_endings \ 386 development/tools/etc1tool \ 387 sdk/emulator/mksdcard \ 388 sdk/sdklauncher \ 389 development/host \ 390 external/expat \ 391 external/libpng \ 392 external/qemu \ 393 external/sqlite/dist \ 394 external/zlib \ 395 frameworks/base \ 396 system/core/adb \ 397 system/core/fastboot \ 398 system/core/libcutils \ 399 system/core/liblog \ 400 system/core/libzipfile 401 402# The following can only be built if "javac" is available. 403# This check is used when building parts of the SDK under Cygwin. 404ifneq (,$(shell which javac 2>/dev/null)) 405subdirs += \ 406 build/tools/signapk \ 407 dalvik/dx \ 408 libcore \ 409 sdk/archquery \ 410 sdk/androidprefs \ 411 sdk/apkbuilder \ 412 sdk/jarutils \ 413 sdk/layoutlib_api \ 414 sdk/layoutlib_utils \ 415 sdk/ninepatch \ 416 sdk/sdkstats \ 417 sdk/sdkmanager \ 418 sdk/layoutopt \ 419 development/apps \ 420 development/tools/mkstubs \ 421 packages 422else 423$(warning SDK_ONLY: javac not available.) 424endif 425 426# Exclude tools/acp when cross-compiling windows under linux 427ifeq ($(findstring Linux,$(UNAME)),) 428subdirs += build/tools/acp 429endif 430 431else # !SDK_ONLY 432ifeq ($(BUILD_TINY_ANDROID), true) 433 434# TINY_ANDROID is a super-minimal build configuration, handy for board 435# bringup and very low level debugging 436 437subdirs := \ 438 bionic \ 439 system/core \ 440 build/libs \ 441 build/target \ 442 build/tools/acp \ 443 build/tools/apriori \ 444 build/tools/kcm \ 445 build/tools/soslim \ 446 external/elfcopy \ 447 external/elfutils \ 448 external/yaffs2 \ 449 external/zlib 450else # !BUILD_TINY_ANDROID 451 452# 453# Typical build; include any Android.mk files we can find. 454# 455subdirs := $(TOP) 456 457FULL_BUILD := true 458 459endif # !BUILD_TINY_ANDROID 460 461endif # !SDK_ONLY 462 463ifneq ($(ONE_SHOT_MAKEFILE),) 464# We've probably been invoked by the "mm" shell function 465# with a subdirectory's makefile. 466include $(ONE_SHOT_MAKEFILE) 467# Change CUSTOM_MODULES to include only modules that were 468# defined by this makefile; this will install all of those 469# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE 470# so that the modules will be installed in the same place they 471# would have been with a normal make. 472CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS))) 473FULL_BUILD := 474# Stub out the notice targets, which probably aren't defined 475# when using ONE_SHOT_MAKEFILE. 476NOTICE-HOST-%: ; 477NOTICE-TARGET-%: ; 478 479else # ONE_SHOT_MAKEFILE 480 481# 482# Include all of the makefiles in the system 483# 484 485# Can't use first-makefiles-under here because 486# --mindepth=2 makes the prunes not work. 487subdir_makefiles := \ 488 $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk) 489 490include $(subdir_makefiles) 491endif # ONE_SHOT_MAKEFILE 492 493# ------------------------------------------------------------------- 494# All module makefiles have been included at this point. 495# ------------------------------------------------------------------- 496 497# ------------------------------------------------------------------- 498# Include any makefiles that must happen after the module makefiles 499# have been included. 500# TODO: have these files register themselves via a global var rather 501# than hard-coding the list here. 502ifdef FULL_BUILD 503 # Only include this during a full build, otherwise we can't be 504 # guaranteed that any policies were included. 505 -include frameworks/policies/base/PolicyConfig.mk 506endif 507 508# ------------------------------------------------------------------- 509# Fix up CUSTOM_MODULES to refer to installed files rather than 510# just bare module names. Leave unknown modules alone in case 511# they're actually full paths to a particular file. 512known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) 513unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) 514CUSTOM_MODULES := \ 515 $(call module-installed-files,$(known_custom_modules)) \ 516 $(unknown_custom_modules) 517 518# ------------------------------------------------------------------- 519# Define dependencies for modules that require other modules. 520# This can only happen now, after we've read in all module makefiles. 521# 522# TODO: deal with the fact that a bare module name isn't 523# unambiguous enough. Maybe declare short targets like 524# APPS:Quake or HOST:SHARED_LIBRARIES:libutils. 525# BUG: the system image won't know to depend on modules that are 526# brought in as requirements of other modules. 527define add-required-deps 528$(1): $(2) 529endef 530$(foreach m,$(ALL_MODULES), \ 531 $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ 532 $(if $(r), \ 533 $(eval r := $(call module-installed-files,$(r))) \ 534 $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ 535 ) \ 536 ) 537m := 538r := 539add-required-deps := 540 541# ------------------------------------------------------------------- 542# Figure out our module sets. 543 544# Of the modules defined by the component makefiles, 545# determine what we actually want to build. 546Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ 547 $(CUSTOM_MODULES)) 548# TODO: Remove the 3 places in the tree that use 549# ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. 550 551ifdef FULL_BUILD 552 # The base list of modules to build for this product is specified 553 # by the appropriate product definition file, which was included 554 # by product_config.make. 555 user_PACKAGES := $(call module-installed-files, \ 556 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) 557 ifeq (0,1) 558 $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) 559 $(foreach p,$(user_PACKAGES),$(info : $(p))) 560 $(error done) 561 endif 562else 563 # We're not doing a full build, and are probably only including 564 # a subset of the module makefiles. Don't try to build any modules 565 # requested by the product, because we probably won't have rules 566 # to build them. 567 user_PACKAGES := 568endif 569# Use tags to get the non-APPS user modules. Use the product 570# definition files to get the APPS user modules. 571user_MODULES := $(sort $(call get-tagged-modules,user)) 572user_MODULES := $(user_MODULES) $(user_PACKAGES) 573 574eng_MODULES := $(sort $(call get-tagged-modules,eng)) 575debug_MODULES := $(sort $(call get-tagged-modules,debug)) 576tests_MODULES := $(sort $(call get-tagged-modules,tests)) 577 578ifeq ($(strip $(tags_to_install)),) 579$(error ASSERTION FAILED: tags_to_install should not be empty) 580endif 581modules_to_install := $(sort $(Default_MODULES) \ 582 $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) 583 584# Some packages may override others using LOCAL_OVERRIDES_PACKAGES. 585# Filter out (do not install) any overridden packages. 586overridden_packages := $(call get-package-overrides,$(modules_to_install)) 587ifdef overridden_packages 588# old_modules_to_install := $(modules_to_install) 589 modules_to_install := \ 590 $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ 591 $(modules_to_install)) 592endif 593#$(error filtered out 594# $(filter-out $(modules_to_install),$(old_modules_to_install))) 595 596# Don't include any GNU targets in the SDK. It's ok (and necessary) 597# to build the host tools, but nothing that's going to be installed 598# on the target (including static libraries). 599ifdef is_sdk_build 600 target_gnu_MODULES := \ 601 $(filter \ 602 $(TARGET_OUT_INTERMEDIATES)/% \ 603 $(TARGET_OUT)/% \ 604 $(TARGET_OUT_DATA)/%, \ 605 $(sort $(call get-tagged-modules,gnu))) 606 $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) 607 modules_to_install := \ 608 $(filter-out $(target_gnu_MODULES),$(modules_to_install)) 609endif 610 611 612# build/core/Makefile contains extra stuff that we don't want to pollute this 613# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES 614# contains everything that's built during the current make, but it also further 615# extends ALL_DEFAULT_INSTALLED_MODULES. 616ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) 617include $(BUILD_SYSTEM)/Makefile 618modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) 619ALL_DEFAULT_INSTALLED_MODULES := 620 621endif # dont_bother 622 623# These are additional goals that we build, in order to make sure that there 624# is as little code as possible in the tree that doesn't build. 625modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED)) 626 627# If you would like to build all goals, and not skip any intermediate 628# steps, you can pass the "all" modifier goal on the commandline. 629ifneq ($(filter all,$(MAKECMDGOALS)),) 630modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT)) 631endif 632 633# for easier debugging 634modules_to_check := $(sort $(modules_to_check)) 635#$(error modules_to_check $(modules_to_check)) 636 637# ------------------------------------------------------------------- 638# This is used to to get the ordering right, you can also use these, 639# but they're considered undocumented, so don't complain if their 640# behavior changes. 641.PHONY: prebuilt 642prebuilt: $(ALL_PREBUILT) 643 644# An internal target that depends on all copied headers 645# (see copy_headers.make). Other targets that need the 646# headers to be copied first can depend on this target. 647.PHONY: all_copied_headers 648all_copied_headers: ; 649 650$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers 651 652# All the droid stuff, in directories 653.PHONY: files 654files: prebuilt \ 655 $(modules_to_install) \ 656 $(modules_to_check) \ 657 $(INSTALLED_ANDROID_INFO_TXT_TARGET) 658 659# ------------------------------------------------------------------- 660 661.PHONY: checkbuild 662checkbuild: $(modules_to_check) 663 664.PHONY: ramdisk 665ramdisk: $(INSTALLED_RAMDISK_TARGET) 666 667.PHONY: systemtarball 668systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) 669 670.PHONY: userdataimage 671userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) 672 673.PHONY: userdatatarball 674userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) 675 676.PHONY: bootimage 677bootimage: $(INSTALLED_BOOTIMAGE_TARGET) 678 679ifeq ($(BUILD_TINY_ANDROID), true) 680INSTALLED_RECOVERYIMAGE_TARGET := 681endif 682 683# Build files and then package it into the rom formats 684.PHONY: droidcore 685droidcore: files \ 686 systemimage \ 687 $(INSTALLED_BOOTIMAGE_TARGET) \ 688 $(INSTALLED_RECOVERYIMAGE_TARGET) \ 689 $(INSTALLED_USERDATAIMAGE_TARGET) \ 690 $(INSTALLED_FILES_FILE) 691 692# Dist for droid if droid is among the cmd goals, or no cmd goal is given. 693ifneq ($(filter droid,$(MAKECMDGOALS))$(filter ||,|$(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))|),) 694ifneq ($(TARGET_BUILD_APPS),) 695 # If this build is just for apps, only build apps and not the full system by default. 696 697 unbundled_build_modules := 698 ifneq ($(filter all,$(TARGET_BUILD_APPS)),) 699 # If they used the magic goal "all" then build everything 700 unbundled_build_modules := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS))) 701 else 702 unbundled_build_modules := $(TARGET_BUILD_APPS) 703 endif 704 705 # dist the unbundled app. 706 $(call dist-for-goals,apps_only, \ 707 $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED)) \ 708 ) 709 710.PHONY: apps_only 711apps_only: $(unbundled_build_modules) 712 713droid: apps_only 714 715else # TARGET_BUILD_APPS 716 $(call dist-for-goals, droidcore, \ 717 $(INTERNAL_UPDATE_PACKAGE_TARGET) \ 718 $(INTERNAL_OTA_PACKAGE_TARGET) \ 719 $(SYMBOLS_ZIP) \ 720 $(APPS_ZIP) \ 721 $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ 722 $(PACKAGE_STATS_FILE) \ 723 $(INSTALLED_FILES_FILE) \ 724 $(INSTALLED_BUILD_PROP_TARGET) \ 725 $(BUILT_TARGET_FILES_PACKAGE) \ 726 $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ 727 ) 728 729 # Tests are installed in userdata.img. If we're building the tests 730 # variant, copy it for "make tests dist". Also copy a zip of the 731 # contents of userdata.img, so that people can easily extract a 732 # single .apk. 733 ifeq ($(TARGET_BUILD_VARIANT),tests) 734 $(call dist-for-goals, droid, \ 735 $(INSTALLED_USERDATAIMAGE_TARGET) \ 736 $(BUILT_TESTS_ZIP_PACKAGE) \ 737 ) 738 endif 739 740# Building a full system-- the default is to build droidcore 741droid: droidcore 742 743endif # TARGET_BUILD_APPS 744endif # droid in $(MAKECMDGOALS) 745 746 747.PHONY: droid tests 748tests: droidcore 749 750.PHONY: docs 751docs: $(ALL_DOCS) 752 753.PHONY: sdk 754ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) 755sdk: $(ALL_SDK_TARGETS) 756ifneq ($(filter sdk,$(MAKECMDGOALS)),) 757$(call dist-for-goals,sdk, \ 758 $(ALL_SDK_TARGETS) \ 759 $(SYMBOLS_ZIP) \ 760 ) 761endif 762 763.PHONY: samplecode 764sample_MODULES := $(sort $(call get-tagged-modules,samples)) 765sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples 766sample_APKS_COLLECTION := \ 767 $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module))) 768$(foreach module,$(sample_MODULES),$(eval $(call \ 769 copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module))))) 770sample_ADDITIONAL_INSTALLED := \ 771 $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES)) 772samplecode: $(sample_APKS_COLLECTION) 773 @echo "Collect sample code apks: $^" 774 # remove apks that are not intended to be installed. 775 rm -f $(sample_ADDITIONAL_INSTALLED) 776 777.PHONY: findbugs 778findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) 779 780.PHONY: clean 781dirs_to_clean := \ 782 $(PRODUCT_OUT) \ 783 $(TARGET_COMMON_OUT_ROOT) \ 784 $(HOST_OUT) \ 785 $(HOST_COMMON_OUT_ROOT) 786clean: 787 @for dir in $(dirs_to_clean) ; do \ 788 echo "Cleaning $$dir..."; \ 789 rm -rf $$dir; \ 790 done 791 @echo "Clean."; \ 792 793.PHONY: clobber 794clobber: 795 @rm -rf $(OUT_DIR) 796 @echo "Entire build directory removed." 797 798# The rules for dataclean and installclean are defined in cleanbuild.mk. 799 800#xxx scrape this from ALL_MODULE_NAME_TAGS 801.PHONY: modules 802modules: 803 @echo "Available sub-modules:" 804 @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ 805 tr -s ' ' '\n' | sort -u | $(COLUMN) 806 807.PHONY: showcommands 808showcommands: 809 @echo >/dev/null 810