1/* 2 * Copyright 2012 Google Inc. 3 * 4 * Use of this source code is governed by a BSD-style license that can be 5 * found in the LICENSE file. 6 */ 7 8#include "SkBitmap.h" 9#include "SkCanvas.h" 10#include "SkDashPathEffect.h" 11#include "SkStrokeRec.h" 12#include "SkSurface.h" 13#include "Test.h" 14 15// test that we can draw an aa-rect at coordinates > 32K (bigger than fixedpoint) 16static void test_big_aa_rect(skiatest::Reporter* reporter) { 17 SkBitmap output; 18 SkPMColor pixel[1]; 19 output.installPixels(SkImageInfo::MakeN32Premul(1, 1), pixel, 4); 20 21 auto surf = SkSurface::MakeRasterN32Premul(300, 33300); 22 SkCanvas* canvas = surf->getCanvas(); 23 24 SkRect r = { 0, 33000, 300, 33300 }; 25 int x = SkScalarRoundToInt(r.left()); 26 int y = SkScalarRoundToInt(r.top()); 27 28 // check that the pixel in question starts as transparent (by the surface) 29 if (surf->readPixels(output, x, y)) { 30 REPORTER_ASSERT(reporter, 0 == pixel[0]); 31 } else { 32 REPORTER_ASSERT(reporter, false, "readPixels failed"); 33 } 34 35 SkPaint paint; 36 paint.setAntiAlias(true); 37 paint.setColor(SK_ColorWHITE); 38 39 canvas->drawRect(r, paint); 40 41 // Now check that it is BLACK 42 if (surf->readPixels(output, x, y)) { 43 // don't know what swizzling PMColor did, but white should always 44 // appear the same. 45 REPORTER_ASSERT(reporter, 0xFFFFFFFF == pixel[0]); 46 } else { 47 REPORTER_ASSERT(reporter, false, "readPixels failed"); 48 } 49} 50 51/////////////////////////////////////////////////////////////////////////////// 52 53static void moveToH(SkPath* path, const uint32_t raw[]) { 54 const float* fptr = (const float*)raw; 55 path->moveTo(fptr[0], fptr[1]); 56} 57 58static void cubicToH(SkPath* path, const uint32_t raw[]) { 59 const float* fptr = (const float*)raw; 60 path->cubicTo(fptr[0], fptr[1], fptr[2], fptr[3], fptr[4], fptr[5]); 61} 62 63// This used to assert, because we performed a cast (int)(pt[0].fX * scale) to 64// arrive at an int (SkFDot6) rather than calling sk_float_round2int. The assert 65// was that the initial line-segment produced by the cubic was not monotonically 66// going down (i.e. the initial DY was negative). By rounding the floats, we get 67// the more proper result. 68// 69// http://code.google.com/p/chromium/issues/detail?id=131181 70// 71 72// we're not calling this test anymore; is that for a reason? 73 74static void test_crbug131181() { 75 /* 76 fX = 18.8943768, 77 fY = 129.121277 78 }, { 79 fX = 18.8937435, 80 fY = 129.121689 81 }, { 82 fX = 18.8950119, 83 fY = 129.120422 84 }, { 85 fX = 18.5030727, 86 fY = 129.13121 87 */ 88 uint32_t data[] = { 89 0x419727af, 0x43011f0c, 0x41972663, 0x43011f27, 90 0x419728fc, 0x43011ed4, 0x4194064b, 0x43012197 91 }; 92 93 SkPath path; 94 moveToH(&path, &data[0]); 95 cubicToH(&path, &data[2]); 96 97 auto surface(SkSurface::MakeRasterN32Premul(640, 480)); 98 99 SkPaint paint; 100 paint.setAntiAlias(true); 101 surface->getCanvas()->drawPath(path, paint); 102} 103 104// This used to assert in debug builds (and crash writing bad memory in release) 105// because we overflowed an intermediate value (B coefficient) setting up our 106// stepper for the quadratic. Now we bias that value by 1/2 so we don't overflow 107static void test_crbug_140803() { 108 SkBitmap bm; 109 bm.allocN32Pixels(2700, 30*1024); 110 SkCanvas canvas(bm); 111 112 SkPath path; 113 path.moveTo(2762, 20); 114 path.quadTo(11, 21702, 10, 21706); 115 SkPaint paint; 116 paint.setAntiAlias(true); 117 canvas.drawPath(path, paint); 118} 119 120// Need to exercise drawing an inverse-path whose bounds intersect the clip, 121// but whose edges do not (since its a quad which draws only in the bottom half 122// of its bounds). 123// In the debug build, we used to assert in this case, until it was fixed. 124// 125static void test_inversepathwithclip() { 126 SkPath path; 127 128 path.moveTo(0, 20); 129 path.quadTo(10, 10, 20, 20); 130 path.toggleInverseFillType(); 131 132 SkPaint paint; 133 134 auto surface(SkSurface::MakeRasterN32Premul(640, 480)); 135 SkCanvas* canvas = surface->getCanvas(); 136 canvas->save(); 137 canvas->clipRect(SkRect::MakeWH(19, 11)); 138 139 paint.setAntiAlias(false); 140 canvas->drawPath(path, paint); 141 paint.setAntiAlias(true); 142 canvas->drawPath(path, paint); 143 144 canvas->restore(); 145 146 // Now do the test again, with the path flipped, so we only draw in the 147 // top half of our bounds, and have the clip intersect our bounds at the 148 // bottom. 149 path.reset(); // preserves our filltype 150 path.moveTo(0, 10); 151 path.quadTo(10, 20, 20, 10); 152 canvas->clipRect(SkRect::MakeXYWH(0, 19, 19, 11)); 153 154 paint.setAntiAlias(false); 155 canvas->drawPath(path, paint); 156 paint.setAntiAlias(true); 157 canvas->drawPath(path, paint); 158} 159 160static void test_bug533() { 161 /* 162 http://code.google.com/p/skia/issues/detail?id=533 163 This particular test/bug only applies to the float case, where the 164 coordinates are very large. 165 */ 166 SkPath path; 167 path.moveTo(64, 3); 168 path.quadTo(-329936, -100000000, 1153, 330003); 169 170 SkPaint paint; 171 paint.setAntiAlias(true); 172 173 auto surface(SkSurface::MakeRasterN32Premul(640, 480)); 174 surface->getCanvas()->drawPath(path, paint); 175} 176 177static void test_crbug_140642() { 178 /* 179 * We used to see this construct, and due to rounding as we accumulated 180 * our length, the loop where we apply the phase would run off the end of 181 * the array, since it relied on just -= each interval value, which did not 182 * behave as "expected". Now the code explicitly checks for walking off the 183 * end of that array. 184 185 * A different (better) fix might be to rewrite dashing to do all of its 186 * length/phase/measure math using double, but this may need to be 187 * coordinated with SkPathMeasure, to be consistent between the two. 188 189 <path stroke="mintcream" stroke-dasharray="27734 35660 2157846850 247" 190 stroke-dashoffset="-248.135982067"> 191 */ 192 193 const SkScalar vals[] = { 27734, 35660, 2157846850.0f, 247 }; 194 auto dontAssert = SkDashPathEffect::Make(vals, 4, -248.135982067f); 195} 196 197static void test_crbug_124652() { 198 /* 199 http://code.google.com/p/chromium/issues/detail?id=124652 200 This particular test/bug only applies to the float case, where 201 large values can "swamp" small ones. 202 */ 203 SkScalar intervals[2] = {837099584, 33450}; 204 auto dontAssert = SkDashPathEffect::Make(intervals, 2, -10); 205} 206 207static void test_bigcubic() { 208 SkPath path; 209 path.moveTo(64, 3); 210 path.cubicTo(-329936, -100000000, -329936, 100000000, 1153, 330003); 211 212 SkPaint paint; 213 paint.setAntiAlias(true); 214 215 auto surface(SkSurface::MakeRasterN32Premul(640, 480)); 216 surface->getCanvas()->drawPath(path, paint); 217} 218 219// asserts if halfway case is not handled 220static void test_halfway() { 221 SkPaint paint; 222 SkPath path; 223 path.moveTo(16365.5f, 1394); 224 path.lineTo(16365.5f, 1387.5f); 225 path.quadTo(16365.5f, 1385.43f, 16367, 1383.96f); 226 path.quadTo(16368.4f, 1382.5f, 16370.5f, 1382.5f); 227 path.lineTo(16465.5f, 1382.5f); 228 path.quadTo(16467.6f, 1382.5f, 16469, 1383.96f); 229 path.quadTo(16470.5f, 1385.43f, 16470.5f, 1387.5f); 230 path.lineTo(16470.5f, 1394); 231 path.quadTo(16470.5f, 1396.07f, 16469, 1397.54f); 232 path.quadTo(16467.6f, 1399, 16465.5f, 1399); 233 path.lineTo(16370.5f, 1399); 234 path.quadTo(16368.4f, 1399, 16367, 1397.54f); 235 path.quadTo(16365.5f, 1396.07f, 16365.5f, 1394); 236 path.close(); 237 SkPath p2; 238 SkMatrix m; 239 m.reset(); 240 m.postTranslate(0.001f, 0.001f); 241 path.transform(m, &p2); 242 243 auto surface(SkSurface::MakeRasterN32Premul(640, 480)); 244 SkCanvas* canvas = surface->getCanvas(); 245 canvas->translate(-16366, -1383); 246 canvas->drawPath(p2, paint); 247 248 m.reset(); 249 m.postTranslate(-0.001f, -0.001f); 250 path.transform(m, &p2); 251 canvas->drawPath(p2, paint); 252 253 m.reset(); 254 path.transform(m, &p2); 255 canvas->drawPath(p2, paint); 256} 257 258// we used to assert if the bounds of the device (clip) was larger than 32K 259// even when the path itself was smaller. We just draw and hope in the debug 260// version to not assert. 261static void test_giantaa() { 262 const int W = 400; 263 const int H = 400; 264 auto surface(SkSurface::MakeRasterN32Premul(33000, 10)); 265 266 SkPaint paint; 267 paint.setAntiAlias(true); 268 SkPath path; 269 path.addOval(SkRect::MakeXYWH(-10, -10, 20 + W, 20 + H)); 270 surface->getCanvas()->drawPath(path, paint); 271} 272 273// Extremely large path_length/dash_length ratios may cause infinite looping 274// in SkDashPathEffect::filterPath() due to single precision rounding. 275// The test is quite expensive, but it should get much faster after the fix 276// for http://crbug.com/165432 goes in. 277static void test_infinite_dash(skiatest::Reporter* reporter) { 278 SkPath path; 279 path.moveTo(0, 0); 280 path.lineTo(5000000, 0); 281 282 SkScalar intervals[] = { 0.2f, 0.2f }; 283 sk_sp<SkPathEffect> dash(SkDashPathEffect::Make(intervals, 2, 0)); 284 285 SkPath filteredPath; 286 SkPaint paint; 287 paint.setStyle(SkPaint::kStroke_Style); 288 paint.setPathEffect(dash); 289 290 paint.getFillPath(path, &filteredPath); 291 // If we reach this, we passed. 292 REPORTER_ASSERT(reporter, true); 293} 294 295// http://crbug.com/165432 296// Limit extreme dash path effects to avoid exhausting the system memory. 297static void test_crbug_165432(skiatest::Reporter* reporter) { 298 SkPath path; 299 path.moveTo(0, 0); 300 path.lineTo(10000000, 0); 301 302 SkScalar intervals[] = { 0.5f, 0.5f }; 303 sk_sp<SkPathEffect> dash(SkDashPathEffect::Make(intervals, 2, 0)); 304 305 SkPaint paint; 306 paint.setStyle(SkPaint::kStroke_Style); 307 paint.setPathEffect(dash); 308 309 SkPath filteredPath; 310 SkStrokeRec rec(paint); 311 REPORTER_ASSERT(reporter, !dash->filterPath(&filteredPath, path, &rec, nullptr)); 312 REPORTER_ASSERT(reporter, filteredPath.isEmpty()); 313} 314 315// http://crbug.com/472147 316// This is a simplified version from the bug. RRect radii not properly scaled. 317static void test_crbug_472147_simple(skiatest::Reporter* reporter) { 318 auto surface(SkSurface::MakeRasterN32Premul(1000, 1000)); 319 SkCanvas* canvas = surface->getCanvas(); 320 SkPaint p; 321 SkRect r = SkRect::MakeLTRB(-246.0f, 33.0f, 848.0f, 33554464.0f); 322 SkVector radii[4] = { 323 { 13.0f, 8.0f }, { 170.0f, 2.0 }, { 256.0f, 33554430.0f }, { 120.0f, 5.0f } 324 }; 325 SkRRect rr; 326 rr.setRectRadii(r, radii); 327 canvas->drawRRect(rr, p); 328} 329 330// http://crbug.com/472147 331// RRect radii not properly scaled. 332static void test_crbug_472147_actual(skiatest::Reporter* reporter) { 333 auto surface(SkSurface::MakeRasterN32Premul(1000, 1000)); 334 SkCanvas* canvas = surface->getCanvas(); 335 SkPaint p; 336 SkRect r = SkRect::MakeLTRB(-246.0f, 33.0f, 848.0f, 33554464.0f); 337 SkVector radii[4] = { 338 { 13.0f, 8.0f }, { 170.0f, 2.0 }, { 256.0f, 33554430.0f }, { 120.0f, 5.0f } 339 }; 340 SkRRect rr; 341 rr.setRectRadii(r, radii); 342 canvas->clipRRect(rr); 343 344 SkRect r2 = SkRect::MakeLTRB(0, 33, 1102, 33554464); 345 canvas->drawRect(r2, p); 346} 347 348DEF_TEST(DrawPath, reporter) { 349 test_giantaa(); 350 test_bug533(); 351 test_bigcubic(); 352 test_crbug_124652(); 353 test_crbug_140642(); 354 test_crbug_140803(); 355 test_inversepathwithclip(); 356 // why? 357 if (false) test_crbug131181(); 358 test_infinite_dash(reporter); 359 test_crbug_165432(reporter); 360 test_crbug_472147_simple(reporter); 361 test_crbug_472147_actual(reporter); 362 test_big_aa_rect(reporter); 363 test_halfway(); 364} 365