CameraMetadata.java revision a57c274fc489eed8da13d154740b1eeadf175fc0
1/* 2 * Copyright (C) 2013 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17package android.hardware.camera2; 18 19import android.annotation.NonNull; 20import android.hardware.camera2.impl.CameraMetadataNative; 21import android.hardware.camera2.impl.PublicKey; 22import android.hardware.camera2.impl.SyntheticKey; 23import android.util.Log; 24 25import java.lang.reflect.Field; 26import java.lang.reflect.Modifier; 27import java.util.ArrayList; 28import java.util.Arrays; 29import java.util.Collections; 30import java.util.List; 31 32/** 33 * The base class for camera controls and information. 34 * 35 * <p> 36 * This class defines the basic key/value map used for querying for camera 37 * characteristics or capture results, and for setting camera request 38 * parameters. 39 * </p> 40 * 41 * <p> 42 * All instances of CameraMetadata are immutable. The list of keys with {@link #getKeys()} 43 * never changes, nor do the values returned by any key with {@code #get} throughout 44 * the lifetime of the object. 45 * </p> 46 * 47 * @see CameraDevice 48 * @see CameraManager 49 * @see CameraCharacteristics 50 **/ 51public abstract class CameraMetadata<TKey> { 52 53 private static final String TAG = "CameraMetadataAb"; 54 private static final boolean DEBUG = false; 55 private CameraMetadataNative mNativeInstance = null; 56 57 /** 58 * Set a camera metadata field to a value. The field definitions can be 59 * found in {@link CameraCharacteristics}, {@link CaptureResult}, and 60 * {@link CaptureRequest}. 61 * 62 * @param key The metadata field to write. 63 * @param value The value to set the field to, which must be of a matching 64 * type to the key. 65 * 66 * @hide 67 */ 68 protected CameraMetadata() { 69 } 70 71 /** 72 * Get a camera metadata field value. 73 * 74 * <p>The field definitions can be 75 * found in {@link CameraCharacteristics}, {@link CaptureResult}, and 76 * {@link CaptureRequest}.</p> 77 * 78 * <p>Querying the value for the same key more than once will return a value 79 * which is equal to the previous queried value.</p> 80 * 81 * @throws IllegalArgumentException if the key was not valid 82 * 83 * @param key The metadata field to read. 84 * @return The value of that key, or {@code null} if the field is not set. 85 * 86 * @hide 87 */ 88 protected abstract <T> T getProtected(TKey key); 89 90 /** 91 * @hide 92 */ 93 protected void setNativeInstance(CameraMetadataNative nativeInstance) { 94 mNativeInstance = nativeInstance; 95 } 96 97 /** 98 * @hide 99 */ 100 protected abstract Class<TKey> getKeyClass(); 101 102 /** 103 * Returns a list of the keys contained in this map. 104 * 105 * <p>The list returned is not modifiable, so any attempts to modify it will throw 106 * a {@code UnsupportedOperationException}.</p> 107 * 108 * <p>All values retrieved by a key from this list with {@code #get} are guaranteed to be 109 * non-{@code null}. Each key is only listed once in the list. The order of the keys 110 * is undefined.</p> 111 * 112 * @return List of the keys contained in this map. 113 */ 114 @SuppressWarnings("unchecked") 115 @NonNull 116 public List<TKey> getKeys() { 117 Class<CameraMetadata<TKey>> thisClass = (Class<CameraMetadata<TKey>>) getClass(); 118 return Collections.unmodifiableList( 119 getKeys(thisClass, getKeyClass(), this, /*filterTags*/null)); 120 } 121 122 /** 123 * Return a list of all the Key<?> that are declared as a field inside of the class 124 * {@code type}. 125 * 126 * <p> 127 * Optionally, if {@code instance} is not null, then filter out any keys with null values. 128 * </p> 129 * 130 * <p> 131 * Optionally, if {@code filterTags} is not {@code null}, then filter out any keys 132 * whose native {@code tag} is not in {@code filterTags}. The {@code filterTags} array will be 133 * sorted as a side effect. 134 * </p> 135 */ 136 /*package*/ @SuppressWarnings("unchecked") 137 <TKey> ArrayList<TKey> getKeys( 138 Class<?> type, Class<TKey> keyClass, 139 CameraMetadata<TKey> instance, 140 int[] filterTags) { 141 142 if (DEBUG) Log.v(TAG, "getKeysStatic for " + type); 143 144 // TotalCaptureResult does not have any of the keys on it, use CaptureResult instead 145 if (type.equals(TotalCaptureResult.class)) { 146 type = CaptureResult.class; 147 } 148 149 if (filterTags != null) { 150 Arrays.sort(filterTags); 151 } 152 153 ArrayList<TKey> keyList = new ArrayList<TKey>(); 154 155 Field[] fields = type.getDeclaredFields(); 156 for (Field field : fields) { 157 // Filter for Keys that are public 158 if (field.getType().isAssignableFrom(keyClass) && 159 (field.getModifiers() & Modifier.PUBLIC) != 0) { 160 161 TKey key; 162 try { 163 key = (TKey) field.get(instance); 164 } catch (IllegalAccessException e) { 165 throw new AssertionError("Can't get IllegalAccessException", e); 166 } catch (IllegalArgumentException e) { 167 throw new AssertionError("Can't get IllegalArgumentException", e); 168 } 169 170 if (instance == null || instance.getProtected(key) != null) { 171 if (shouldKeyBeAdded(key, field, filterTags)) { 172 keyList.add(key); 173 174 if (DEBUG) { 175 Log.v(TAG, "getKeysStatic - key was added - " + key); 176 } 177 } else if (DEBUG) { 178 Log.v(TAG, "getKeysStatic - key was filtered - " + key); 179 } 180 } 181 } 182 } 183 184 if (null == mNativeInstance) { 185 return keyList; 186 } 187 188 ArrayList<TKey> vendorKeys = mNativeInstance.getAllVendorKeys(keyClass); 189 190 if (vendorKeys != null) { 191 for (TKey k : vendorKeys) { 192 String keyName; 193 long vendorId; 194 if (k instanceof CaptureRequest.Key<?>) { 195 keyName = ((CaptureRequest.Key<?>) k).getName(); 196 vendorId = ((CaptureRequest.Key<?>) k).getVendorId(); 197 } else if (k instanceof CaptureResult.Key<?>) { 198 keyName = ((CaptureResult.Key<?>) k).getName(); 199 vendorId = ((CaptureResult.Key<?>) k).getVendorId(); 200 } else if (k instanceof CameraCharacteristics.Key<?>) { 201 keyName = ((CameraCharacteristics.Key<?>) k).getName(); 202 vendorId = ((CameraCharacteristics.Key<?>) k).getVendorId(); 203 } else { 204 continue; 205 } 206 207 if (filterTags == null || Arrays.binarySearch(filterTags, 208 CameraMetadataNative.getTag(keyName, vendorId)) >= 0) { 209 keyList.add(k); 210 } 211 } 212 } 213 214 return keyList; 215 } 216 217 @SuppressWarnings("rawtypes") 218 private static <TKey> boolean shouldKeyBeAdded(TKey key, Field field, int[] filterTags) { 219 if (key == null) { 220 throw new NullPointerException("key must not be null"); 221 } 222 223 CameraMetadataNative.Key nativeKey; 224 225 /* 226 * Get the native key from the public api key 227 */ 228 if (key instanceof CameraCharacteristics.Key) { 229 nativeKey = ((CameraCharacteristics.Key)key).getNativeKey(); 230 } else if (key instanceof CaptureResult.Key) { 231 nativeKey = ((CaptureResult.Key)key).getNativeKey(); 232 } else if (key instanceof CaptureRequest.Key) { 233 nativeKey = ((CaptureRequest.Key)key).getNativeKey(); 234 } else { 235 // Reject fields that aren't a key 236 throw new IllegalArgumentException("key type must be that of a metadata key"); 237 } 238 239 if (field.getAnnotation(PublicKey.class) == null) { 240 // Never expose @hide keys up to the API user 241 return false; 242 } 243 244 // No filtering necessary 245 if (filterTags == null) { 246 return true; 247 } 248 249 if (field.getAnnotation(SyntheticKey.class) != null) { 250 // This key is synthetic, so calling #getTag will throw IAE 251 252 // TODO: don't just assume all public+synthetic keys are always available 253 return true; 254 } 255 256 /* 257 * Regular key: look up it's native tag and see if it's in filterTags 258 */ 259 260 int keyTag = nativeKey.getTag(); 261 262 // non-negative result is returned iff the value is in the array 263 return Arrays.binarySearch(filterTags, keyTag) >= 0; 264 } 265 266 /*@O~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ 267 * The enum values below this point are generated from metadata 268 * definitions in /system/media/camera/docs. Do not modify by hand or 269 * modify the comment blocks at the start or end. 270 *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~*/ 271 272 // 273 // Enumeration values for CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION 274 // 275 276 /** 277 * <p>The lens focus distance is not accurate, and the units used for 278 * {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} do not correspond to any physical units.</p> 279 * <p>Setting the lens to the same focus distance on separate occasions may 280 * result in a different real focus distance, depending on factors such 281 * as the orientation of the device, the age of the focusing mechanism, 282 * and the device temperature. The focus distance value will still be 283 * in the range of <code>[0, {@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance}]</code>, where 0 284 * represents the farthest focus.</p> 285 * 286 * @see CaptureRequest#LENS_FOCUS_DISTANCE 287 * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE 288 * @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION 289 */ 290 public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED = 0; 291 292 /** 293 * <p>The lens focus distance is measured in diopters.</p> 294 * <p>However, setting the lens to the same focus distance 295 * on separate occasions may result in a different real 296 * focus distance, depending on factors such as the 297 * orientation of the device, the age of the focusing 298 * mechanism, and the device temperature.</p> 299 * @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION 300 */ 301 public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE = 1; 302 303 /** 304 * <p>The lens focus distance is measured in diopters, and 305 * is calibrated.</p> 306 * <p>The lens mechanism is calibrated so that setting the 307 * same focus distance is repeatable on multiple 308 * occasions with good accuracy, and the focus distance 309 * corresponds to the real physical distance to the plane 310 * of best focus.</p> 311 * @see CameraCharacteristics#LENS_INFO_FOCUS_DISTANCE_CALIBRATION 312 */ 313 public static final int LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED = 2; 314 315 // 316 // Enumeration values for CameraCharacteristics#LENS_FACING 317 // 318 319 /** 320 * <p>The camera device faces the same direction as the device's screen.</p> 321 * @see CameraCharacteristics#LENS_FACING 322 */ 323 public static final int LENS_FACING_FRONT = 0; 324 325 /** 326 * <p>The camera device faces the opposite direction as the device's screen.</p> 327 * @see CameraCharacteristics#LENS_FACING 328 */ 329 public static final int LENS_FACING_BACK = 1; 330 331 /** 332 * <p>The camera device is an external camera, and has no fixed facing relative to the 333 * device's screen.</p> 334 * @see CameraCharacteristics#LENS_FACING 335 */ 336 public static final int LENS_FACING_EXTERNAL = 2; 337 338 // 339 // Enumeration values for CameraCharacteristics#LENS_POSE_REFERENCE 340 // 341 342 /** 343 * <p>The value of {@link CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation} is relative to the optical center of 344 * the largest camera device facing the same direction as this camera.</p> 345 * <p>This is the default value for API levels before Android P.</p> 346 * 347 * @see CameraCharacteristics#LENS_POSE_TRANSLATION 348 * @see CameraCharacteristics#LENS_POSE_REFERENCE 349 */ 350 public static final int LENS_POSE_REFERENCE_PRIMARY_CAMERA = 0; 351 352 /** 353 * <p>The value of {@link CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation} is relative to the position of the 354 * primary gyroscope of this Android device.</p> 355 * 356 * @see CameraCharacteristics#LENS_POSE_TRANSLATION 357 * @see CameraCharacteristics#LENS_POSE_REFERENCE 358 */ 359 public static final int LENS_POSE_REFERENCE_GYROSCOPE = 1; 360 361 // 362 // Enumeration values for CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 363 // 364 365 /** 366 * <p>The minimal set of capabilities that every camera 367 * device (regardless of {@link CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL android.info.supportedHardwareLevel}) 368 * supports.</p> 369 * <p>This capability is listed by all normal devices, and 370 * indicates that the camera device has a feature set 371 * that's comparable to the baseline requirements for the 372 * older android.hardware.Camera API.</p> 373 * <p>Devices with the DEPTH_OUTPUT capability might not list this 374 * capability, indicating that they support only depth measurement, 375 * not standard color output.</p> 376 * 377 * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 378 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 379 */ 380 public static final int REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE = 0; 381 382 /** 383 * <p>The camera device can be manually controlled (3A algorithms such 384 * as auto-exposure, and auto-focus can be bypassed). 385 * The camera device supports basic manual control of the sensor image 386 * acquisition related stages. This means the following controls are 387 * guaranteed to be supported:</p> 388 * <ul> 389 * <li>Manual frame duration control<ul> 390 * <li>{@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration}</li> 391 * <li>{@link CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION android.sensor.info.maxFrameDuration}</li> 392 * </ul> 393 * </li> 394 * <li>Manual exposure control<ul> 395 * <li>{@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}</li> 396 * <li>{@link CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE android.sensor.info.exposureTimeRange}</li> 397 * </ul> 398 * </li> 399 * <li>Manual sensitivity control<ul> 400 * <li>{@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}</li> 401 * <li>{@link CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE android.sensor.info.sensitivityRange}</li> 402 * </ul> 403 * </li> 404 * <li>Manual lens control (if the lens is adjustable)<ul> 405 * <li>android.lens.*</li> 406 * </ul> 407 * </li> 408 * <li>Manual flash control (if a flash unit is present)<ul> 409 * <li>android.flash.*</li> 410 * </ul> 411 * </li> 412 * <li>Manual black level locking<ul> 413 * <li>{@link CaptureRequest#BLACK_LEVEL_LOCK android.blackLevel.lock}</li> 414 * </ul> 415 * </li> 416 * <li>Auto exposure lock<ul> 417 * <li>{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock}</li> 418 * </ul> 419 * </li> 420 * </ul> 421 * <p>If any of the above 3A algorithms are enabled, then the camera 422 * device will accurately report the values applied by 3A in the 423 * result.</p> 424 * <p>A given camera device may also support additional manual sensor controls, 425 * but this capability only covers the above list of controls.</p> 426 * <p>If this is supported, {@link CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap} will 427 * additionally return a min frame duration that is greater than 428 * zero for each supported size-format combination.</p> 429 * 430 * @see CaptureRequest#BLACK_LEVEL_LOCK 431 * @see CaptureRequest#CONTROL_AE_LOCK 432 * @see CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP 433 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 434 * @see CaptureRequest#SENSOR_FRAME_DURATION 435 * @see CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE 436 * @see CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION 437 * @see CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE 438 * @see CaptureRequest#SENSOR_SENSITIVITY 439 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 440 */ 441 public static final int REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR = 1; 442 443 /** 444 * <p>The camera device post-processing stages can be manually controlled. 445 * The camera device supports basic manual control of the image post-processing 446 * stages. This means the following controls are guaranteed to be supported:</p> 447 * <ul> 448 * <li> 449 * <p>Manual tonemap control</p> 450 * <ul> 451 * <li>{@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}</li> 452 * <li>{@link CaptureRequest#TONEMAP_MODE android.tonemap.mode}</li> 453 * <li>{@link CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS android.tonemap.maxCurvePoints}</li> 454 * <li>{@link CaptureRequest#TONEMAP_GAMMA android.tonemap.gamma}</li> 455 * <li>{@link CaptureRequest#TONEMAP_PRESET_CURVE android.tonemap.presetCurve}</li> 456 * </ul> 457 * </li> 458 * <li> 459 * <p>Manual white balance control</p> 460 * <ul> 461 * <li>{@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}</li> 462 * <li>{@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains}</li> 463 * </ul> 464 * </li> 465 * <li>Manual lens shading map control<ul> 466 * <li>{@link CaptureRequest#SHADING_MODE android.shading.mode}</li> 467 * <li>{@link CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE android.statistics.lensShadingMapMode}</li> 468 * <li>android.statistics.lensShadingMap</li> 469 * <li>android.lens.info.shadingMapSize</li> 470 * </ul> 471 * </li> 472 * <li>Manual aberration correction control (if aberration correction is supported)<ul> 473 * <li>{@link CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE android.colorCorrection.aberrationMode}</li> 474 * <li>{@link CameraCharacteristics#COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES android.colorCorrection.availableAberrationModes}</li> 475 * </ul> 476 * </li> 477 * <li>Auto white balance lock<ul> 478 * <li>{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}</li> 479 * </ul> 480 * </li> 481 * </ul> 482 * <p>If auto white balance is enabled, then the camera device 483 * will accurately report the values applied by AWB in the result.</p> 484 * <p>A given camera device may also support additional post-processing 485 * controls, but this capability only covers the above list of controls.</p> 486 * 487 * @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE 488 * @see CameraCharacteristics#COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES 489 * @see CaptureRequest#COLOR_CORRECTION_GAINS 490 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 491 * @see CaptureRequest#CONTROL_AWB_LOCK 492 * @see CaptureRequest#SHADING_MODE 493 * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE 494 * @see CaptureRequest#TONEMAP_CURVE 495 * @see CaptureRequest#TONEMAP_GAMMA 496 * @see CameraCharacteristics#TONEMAP_MAX_CURVE_POINTS 497 * @see CaptureRequest#TONEMAP_MODE 498 * @see CaptureRequest#TONEMAP_PRESET_CURVE 499 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 500 */ 501 public static final int REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING = 2; 502 503 /** 504 * <p>The camera device supports outputting RAW buffers and 505 * metadata for interpreting them.</p> 506 * <p>Devices supporting the RAW capability allow both for 507 * saving DNG files, and for direct application processing of 508 * raw sensor images.</p> 509 * <ul> 510 * <li>RAW_SENSOR is supported as an output format.</li> 511 * <li>The maximum available resolution for RAW_SENSOR streams 512 * will match either the value in 513 * {@link CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE android.sensor.info.pixelArraySize} or 514 * {@link CameraCharacteristics#SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE android.sensor.info.preCorrectionActiveArraySize}.</li> 515 * <li>All DNG-related optional metadata entries are provided 516 * by the camera device.</li> 517 * </ul> 518 * 519 * @see CameraCharacteristics#SENSOR_INFO_PIXEL_ARRAY_SIZE 520 * @see CameraCharacteristics#SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE 521 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 522 */ 523 public static final int REQUEST_AVAILABLE_CAPABILITIES_RAW = 3; 524 525 /** 526 * <p>The camera device supports the Zero Shutter Lag reprocessing use case.</p> 527 * <ul> 528 * <li>One input stream is supported, that is, <code>{@link CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS android.request.maxNumInputStreams} == 1</code>.</li> 529 * <li>{@link android.graphics.ImageFormat#PRIVATE } is supported as an output/input format, 530 * that is, {@link android.graphics.ImageFormat#PRIVATE } is included in the lists of 531 * formats returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats } and {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats }.</li> 532 * <li>{@link android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput } 533 * returns non empty int[] for each supported input format returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats }.</li> 534 * <li>Each size returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputSizes getInputSizes(ImageFormat.PRIVATE)} is also included in {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes getOutputSizes(ImageFormat.PRIVATE)}</li> 535 * <li>Using {@link android.graphics.ImageFormat#PRIVATE } does not cause a frame rate drop 536 * relative to the sensor's maximum capture rate (at that resolution).</li> 537 * <li>{@link android.graphics.ImageFormat#PRIVATE } will be reprocessable into both 538 * {@link android.graphics.ImageFormat#YUV_420_888 } and 539 * {@link android.graphics.ImageFormat#JPEG } formats.</li> 540 * <li>The maximum available resolution for PRIVATE streams 541 * (both input/output) will match the maximum available 542 * resolution of JPEG streams.</li> 543 * <li>Static metadata {@link CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL android.reprocess.maxCaptureStall}.</li> 544 * <li>Only below controls are effective for reprocessing requests and 545 * will be present in capture results, other controls in reprocess 546 * requests will be ignored by the camera device.<ul> 547 * <li>android.jpeg.*</li> 548 * <li>{@link CaptureRequest#NOISE_REDUCTION_MODE android.noiseReduction.mode}</li> 549 * <li>{@link CaptureRequest#EDGE_MODE android.edge.mode}</li> 550 * </ul> 551 * </li> 552 * <li>{@link CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES android.noiseReduction.availableNoiseReductionModes} and 553 * {@link CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES android.edge.availableEdgeModes} will both list ZERO_SHUTTER_LAG as a supported mode.</li> 554 * </ul> 555 * 556 * @see CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES 557 * @see CaptureRequest#EDGE_MODE 558 * @see CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES 559 * @see CaptureRequest#NOISE_REDUCTION_MODE 560 * @see CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL 561 * @see CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS 562 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 563 */ 564 public static final int REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING = 4; 565 566 /** 567 * <p>The camera device supports accurately reporting the sensor settings for many of 568 * the sensor controls while the built-in 3A algorithm is running. This allows 569 * reporting of sensor settings even when these settings cannot be manually changed.</p> 570 * <p>The values reported for the following controls are guaranteed to be available 571 * in the CaptureResult, including when 3A is enabled:</p> 572 * <ul> 573 * <li>Exposure control<ul> 574 * <li>{@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}</li> 575 * </ul> 576 * </li> 577 * <li>Sensitivity control<ul> 578 * <li>{@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}</li> 579 * </ul> 580 * </li> 581 * <li>Lens controls (if the lens is adjustable)<ul> 582 * <li>{@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}</li> 583 * <li>{@link CaptureRequest#LENS_APERTURE android.lens.aperture}</li> 584 * </ul> 585 * </li> 586 * </ul> 587 * <p>This capability is a subset of the MANUAL_SENSOR control capability, and will 588 * always be included if the MANUAL_SENSOR capability is available.</p> 589 * 590 * @see CaptureRequest#LENS_APERTURE 591 * @see CaptureRequest#LENS_FOCUS_DISTANCE 592 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 593 * @see CaptureRequest#SENSOR_SENSITIVITY 594 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 595 */ 596 public static final int REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS = 5; 597 598 /** 599 * <p>The camera device supports capturing high-resolution images at >= 20 frames per 600 * second, in at least the uncompressed YUV format, when post-processing settings are set 601 * to FAST. Additionally, maximum-resolution images can be captured at >= 10 frames 602 * per second. Here, 'high resolution' means at least 8 megapixels, or the maximum 603 * resolution of the device, whichever is smaller.</p> 604 * <p>More specifically, this means that a size matching the camera device's active array 605 * size is listed as a supported size for the {@link android.graphics.ImageFormat#YUV_420_888 } format in either {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes } or {@link android.hardware.camera2.params.StreamConfigurationMap#getHighResolutionOutputSizes }, 606 * with a minimum frame duration for that format and size of either <= 1/20 s, or 607 * <= 1/10 s, respectively; and the {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES android.control.aeAvailableTargetFpsRanges} entry 608 * lists at least one FPS range where the minimum FPS is >= 1 / minimumFrameDuration 609 * for the maximum-size YUV_420_888 format. If that maximum size is listed in {@link android.hardware.camera2.params.StreamConfigurationMap#getHighResolutionOutputSizes }, 610 * then the list of resolutions for YUV_420_888 from {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes } contains at 611 * least one resolution >= 8 megapixels, with a minimum frame duration of <= 1/20 612 * s.</p> 613 * <p>If the device supports the {@link android.graphics.ImageFormat#RAW10 }, {@link android.graphics.ImageFormat#RAW12 }, then those can also be 614 * captured at the same rate as the maximum-size YUV_420_888 resolution is.</p> 615 * <p>If the device supports the PRIVATE_REPROCESSING capability, then the same guarantees 616 * as for the YUV_420_888 format also apply to the {@link android.graphics.ImageFormat#PRIVATE } format.</p> 617 * <p>In addition, the {@link CameraCharacteristics#SYNC_MAX_LATENCY android.sync.maxLatency} field is guaranted to have a value between 0 618 * and 4, inclusive. {@link CameraCharacteristics#CONTROL_AE_LOCK_AVAILABLE android.control.aeLockAvailable} and {@link CameraCharacteristics#CONTROL_AWB_LOCK_AVAILABLE android.control.awbLockAvailable} 619 * are also guaranteed to be <code>true</code> so burst capture with these two locks ON yields 620 * consistent image output.</p> 621 * 622 * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES 623 * @see CameraCharacteristics#CONTROL_AE_LOCK_AVAILABLE 624 * @see CameraCharacteristics#CONTROL_AWB_LOCK_AVAILABLE 625 * @see CameraCharacteristics#SYNC_MAX_LATENCY 626 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 627 */ 628 public static final int REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE = 6; 629 630 /** 631 * <p>The camera device supports the YUV_420_888 reprocessing use case, similar as 632 * PRIVATE_REPROCESSING, This capability requires the camera device to support the 633 * following:</p> 634 * <ul> 635 * <li>One input stream is supported, that is, <code>{@link CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS android.request.maxNumInputStreams} == 1</code>.</li> 636 * <li>{@link android.graphics.ImageFormat#YUV_420_888 } is supported as an output/input 637 * format, that is, YUV_420_888 is included in the lists of formats returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats } and {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats }.</li> 638 * <li>{@link android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput } 639 * returns non-empty int[] for each supported input format returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats }.</li> 640 * <li>Each size returned by {@link android.hardware.camera2.params.StreamConfigurationMap#getInputSizes getInputSizes(YUV_420_888)} is also included in {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes getOutputSizes(YUV_420_888)}</li> 641 * <li>Using {@link android.graphics.ImageFormat#YUV_420_888 } does not cause a frame rate 642 * drop relative to the sensor's maximum capture rate (at that resolution).</li> 643 * <li>{@link android.graphics.ImageFormat#YUV_420_888 } will be reprocessable into both 644 * {@link android.graphics.ImageFormat#YUV_420_888 } and {@link android.graphics.ImageFormat#JPEG } formats.</li> 645 * <li>The maximum available resolution for {@link android.graphics.ImageFormat#YUV_420_888 } streams (both input/output) will match the 646 * maximum available resolution of {@link android.graphics.ImageFormat#JPEG } streams.</li> 647 * <li>Static metadata {@link CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL android.reprocess.maxCaptureStall}.</li> 648 * <li>Only the below controls are effective for reprocessing requests and will be present 649 * in capture results. The reprocess requests are from the original capture results 650 * that are associated with the intermediate {@link android.graphics.ImageFormat#YUV_420_888 } output buffers. All other controls in the 651 * reprocess requests will be ignored by the camera device.<ul> 652 * <li>android.jpeg.*</li> 653 * <li>{@link CaptureRequest#NOISE_REDUCTION_MODE android.noiseReduction.mode}</li> 654 * <li>{@link CaptureRequest#EDGE_MODE android.edge.mode}</li> 655 * <li>{@link CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR android.reprocess.effectiveExposureFactor}</li> 656 * </ul> 657 * </li> 658 * <li>{@link CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES android.noiseReduction.availableNoiseReductionModes} and 659 * {@link CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES android.edge.availableEdgeModes} will both list ZERO_SHUTTER_LAG as a supported mode.</li> 660 * </ul> 661 * 662 * @see CameraCharacteristics#EDGE_AVAILABLE_EDGE_MODES 663 * @see CaptureRequest#EDGE_MODE 664 * @see CameraCharacteristics#NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES 665 * @see CaptureRequest#NOISE_REDUCTION_MODE 666 * @see CaptureRequest#REPROCESS_EFFECTIVE_EXPOSURE_FACTOR 667 * @see CameraCharacteristics#REPROCESS_MAX_CAPTURE_STALL 668 * @see CameraCharacteristics#REQUEST_MAX_NUM_INPUT_STREAMS 669 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 670 */ 671 public static final int REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING = 7; 672 673 /** 674 * <p>The camera device can produce depth measurements from its field of view.</p> 675 * <p>This capability requires the camera device to support the following:</p> 676 * <ul> 677 * <li>{@link android.graphics.ImageFormat#DEPTH16 } is supported as 678 * an output format.</li> 679 * <li>{@link android.graphics.ImageFormat#DEPTH_POINT_CLOUD } is 680 * optionally supported as an output format.</li> 681 * <li>This camera device, and all camera devices with the same {@link CameraCharacteristics#LENS_FACING android.lens.facing}, will 682 * list the following calibration metadata entries in both {@link android.hardware.camera2.CameraCharacteristics } 683 * and {@link android.hardware.camera2.CaptureResult }:<ul> 684 * <li>{@link CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation}</li> 685 * <li>{@link CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation}</li> 686 * <li>{@link CameraCharacteristics#LENS_INTRINSIC_CALIBRATION android.lens.intrinsicCalibration}</li> 687 * <li>{@link CameraCharacteristics#LENS_DISTORTION android.lens.distortion}</li> 688 * </ul> 689 * </li> 690 * <li>The {@link CameraCharacteristics#DEPTH_DEPTH_IS_EXCLUSIVE android.depth.depthIsExclusive} entry is listed by this device.</li> 691 * <li>As of Android P, the {@link CameraCharacteristics#LENS_POSE_REFERENCE android.lens.poseReference} entry is listed by this device.</li> 692 * <li>A LIMITED camera with only the DEPTH_OUTPUT capability does not have to support 693 * normal YUV_420_888, JPEG, and PRIV-format outputs. It only has to support the DEPTH16 694 * format.</li> 695 * </ul> 696 * <p>Generally, depth output operates at a slower frame rate than standard color capture, 697 * so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that 698 * should be accounted for (see {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration }). 699 * On a device that supports both depth and color-based output, to enable smooth preview, 700 * using a repeating burst is recommended, where a depth-output target is only included 701 * once every N frames, where N is the ratio between preview output rate and depth output 702 * rate, including depth stall time.</p> 703 * 704 * @see CameraCharacteristics#DEPTH_DEPTH_IS_EXCLUSIVE 705 * @see CameraCharacteristics#LENS_DISTORTION 706 * @see CameraCharacteristics#LENS_FACING 707 * @see CameraCharacteristics#LENS_INTRINSIC_CALIBRATION 708 * @see CameraCharacteristics#LENS_POSE_REFERENCE 709 * @see CameraCharacteristics#LENS_POSE_ROTATION 710 * @see CameraCharacteristics#LENS_POSE_TRANSLATION 711 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 712 */ 713 public static final int REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT = 8; 714 715 /** 716 * <p>The device supports constrained high speed video recording (frame rate >=120fps) use 717 * case. The camera device will support high speed capture session created by {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession }, which 718 * only accepts high speed request lists created by {@link android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList }.</p> 719 * <p>A camera device can still support high speed video streaming by advertising the high 720 * speed FPS ranges in {@link CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES android.control.aeAvailableTargetFpsRanges}. For this case, all 721 * normal capture request per frame control and synchronization requirements will apply 722 * to the high speed fps ranges, the same as all other fps ranges. This capability 723 * describes the capability of a specialized operating mode with many limitations (see 724 * below), which is only targeted at high speed video recording.</p> 725 * <p>The supported high speed video sizes and fps ranges are specified in {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges }. 726 * To get desired output frame rates, the application is only allowed to select video 727 * size and FPS range combinations provided by {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes }. The 728 * fps range can be controlled via {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange}.</p> 729 * <p>In this capability, the camera device will override aeMode, awbMode, and afMode to 730 * ON, AUTO, and CONTINUOUS_VIDEO, respectively. All post-processing block mode 731 * controls will be overridden to be FAST. Therefore, no manual control of capture 732 * and post-processing parameters is possible. All other controls operate the 733 * same as when {@link CaptureRequest#CONTROL_MODE android.control.mode} == AUTO. This means that all other 734 * android.control.* fields continue to work, such as</p> 735 * <ul> 736 * <li>{@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange}</li> 737 * <li>{@link CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION android.control.aeExposureCompensation}</li> 738 * <li>{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock}</li> 739 * <li>{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}</li> 740 * <li>{@link CaptureRequest#CONTROL_EFFECT_MODE android.control.effectMode}</li> 741 * <li>{@link CaptureRequest#CONTROL_AE_REGIONS android.control.aeRegions}</li> 742 * <li>{@link CaptureRequest#CONTROL_AF_REGIONS android.control.afRegions}</li> 743 * <li>{@link CaptureRequest#CONTROL_AWB_REGIONS android.control.awbRegions}</li> 744 * <li>{@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}</li> 745 * <li>{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}</li> 746 * </ul> 747 * <p>Outside of android.control.*, the following controls will work:</p> 748 * <ul> 749 * <li>{@link CaptureRequest#FLASH_MODE android.flash.mode} (TORCH mode only, automatic flash for still capture will not 750 * work since aeMode is ON)</li> 751 * <li>{@link CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE android.lens.opticalStabilizationMode} (if it is supported)</li> 752 * <li>{@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion}</li> 753 * <li>{@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} (if it is supported)</li> 754 * </ul> 755 * <p>For high speed recording use case, the actual maximum supported frame rate may 756 * be lower than what camera can output, depending on the destination Surfaces for 757 * the image data. For example, if the destination surface is from video encoder, 758 * the application need check if the video encoder is capable of supporting the 759 * high frame rate for a given video size, or it will end up with lower recording 760 * frame rate. If the destination surface is from preview window, the actual preview frame 761 * rate will be bounded by the screen refresh rate.</p> 762 * <p>The camera device will only support up to 2 high speed simultaneous output surfaces 763 * (preview and recording surfaces) in this mode. Above controls will be effective only 764 * if all of below conditions are true:</p> 765 * <ul> 766 * <li>The application creates a camera capture session with no more than 2 surfaces via 767 * {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession }. The 768 * targeted surfaces must be preview surface (either from {@link android.view.SurfaceView } or {@link android.graphics.SurfaceTexture }) or recording 769 * surface(either from {@link android.media.MediaRecorder#getSurface } or {@link android.media.MediaCodec#createInputSurface }).</li> 770 * <li>The stream sizes are selected from the sizes reported by 771 * {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes }.</li> 772 * <li>The FPS ranges are selected from {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges }.</li> 773 * </ul> 774 * <p>When above conditions are NOT satistied, 775 * {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession } 776 * will fail.</p> 777 * <p>Switching to a FPS range that has different maximum FPS may trigger some camera device 778 * reconfigurations, which may introduce extra latency. It is recommended that 779 * the application avoids unnecessary maximum target FPS changes as much as possible 780 * during high speed streaming.</p> 781 * 782 * @see CameraCharacteristics#CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES 783 * @see CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION 784 * @see CaptureRequest#CONTROL_AE_LOCK 785 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 786 * @see CaptureRequest#CONTROL_AE_REGIONS 787 * @see CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE 788 * @see CaptureRequest#CONTROL_AF_REGIONS 789 * @see CaptureRequest#CONTROL_AF_TRIGGER 790 * @see CaptureRequest#CONTROL_AWB_LOCK 791 * @see CaptureRequest#CONTROL_AWB_REGIONS 792 * @see CaptureRequest#CONTROL_EFFECT_MODE 793 * @see CaptureRequest#CONTROL_MODE 794 * @see CaptureRequest#FLASH_MODE 795 * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE 796 * @see CaptureRequest#SCALER_CROP_REGION 797 * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE 798 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 799 */ 800 public static final int REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO = 9; 801 802 /** 803 * <p>The camera device supports the MOTION_TRACKING value for 804 * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent}, which limits maximum exposure time to 20 ms.</p> 805 * <p>This limits the motion blur of capture images, resulting in better image tracking 806 * results for use cases such as image stabilization or augmented reality.</p> 807 * 808 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 809 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 810 */ 811 public static final int REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING = 10; 812 813 /** 814 * <p>The camera device is a logical camera backed by two or more physical cameras that are 815 * also exposed to the application.</p> 816 * <p>Camera application shouldn't assume that there are at most 1 rear camera and 1 front 817 * camera in the system. For an application that switches between front and back cameras, 818 * the recommendation is to switch between the first rear camera and the first front 819 * camera in the list of supported camera devices.</p> 820 * <p>This capability requires the camera device to support the following:</p> 821 * <ul> 822 * <li>This camera device must list the following static metadata entries in {@link android.hardware.camera2.CameraCharacteristics }:<ul> 823 * <li>android.logicalMultiCamera.physicalIds</li> 824 * <li>{@link CameraCharacteristics#LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE android.logicalMultiCamera.sensorSyncType}</li> 825 * </ul> 826 * </li> 827 * <li>The underlying physical cameras' static metadata must list the following entries, 828 * so that the application can correlate pixels from the physical streams:<ul> 829 * <li>{@link CameraCharacteristics#LENS_POSE_REFERENCE android.lens.poseReference}</li> 830 * <li>{@link CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation}</li> 831 * <li>{@link CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation}</li> 832 * <li>{@link CameraCharacteristics#LENS_INTRINSIC_CALIBRATION android.lens.intrinsicCalibration}</li> 833 * <li>{@link CameraCharacteristics#LENS_DISTORTION android.lens.distortion}</li> 834 * </ul> 835 * </li> 836 * <li>The SENSOR_INFO_TIMESTAMP_SOURCE of the logical device and physical devices must be 837 * the same.</li> 838 * <li>The logical camera device must be LIMITED or higher device.</li> 839 * </ul> 840 * <p>Both the logical camera device and its underlying physical devices support the 841 * mandatory stream combinations required for their device levels.</p> 842 * <p>Additionally, for each guaranteed stream combination, the logical camera supports:</p> 843 * <ul> 844 * <li>For each guaranteed stream combination, the logical camera supports replacing one 845 * logical {@link android.graphics.ImageFormat#YUV_420_888 YUV_420_888} 846 * or raw stream with two physical streams of the same size and format, each from a 847 * separate physical camera, given that the size and format are supported by both 848 * physical cameras.</li> 849 * <li>If the logical camera doesn't advertise RAW capability, but the underlying physical 850 * cameras do, the logical camera will support guaranteed stream combinations for RAW 851 * capability, except that the RAW streams will be physical streams, each from a separate 852 * physical camera. This is usually the case when the physical cameras have different 853 * sensor sizes.</li> 854 * </ul> 855 * <p>Using physical streams in place of a logical stream of the same size and format will 856 * not slow down the frame rate of the capture, as long as the minimum frame duration 857 * of the physical and logical streams are the same.</p> 858 * 859 * @see CameraCharacteristics#LENS_DISTORTION 860 * @see CameraCharacteristics#LENS_INTRINSIC_CALIBRATION 861 * @see CameraCharacteristics#LENS_POSE_REFERENCE 862 * @see CameraCharacteristics#LENS_POSE_ROTATION 863 * @see CameraCharacteristics#LENS_POSE_TRANSLATION 864 * @see CameraCharacteristics#LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE 865 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 866 */ 867 public static final int REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA = 11; 868 869 /** 870 * <p>The camera device is a monochrome camera that doesn't contain a color filter array, 871 * and the pixel values on U and V planes are all 128.</p> 872 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 873 */ 874 public static final int REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME = 12; 875 876 // 877 // Enumeration values for CameraCharacteristics#SCALER_CROPPING_TYPE 878 // 879 880 /** 881 * <p>The camera device only supports centered crop regions.</p> 882 * @see CameraCharacteristics#SCALER_CROPPING_TYPE 883 */ 884 public static final int SCALER_CROPPING_TYPE_CENTER_ONLY = 0; 885 886 /** 887 * <p>The camera device supports arbitrarily chosen crop regions.</p> 888 * @see CameraCharacteristics#SCALER_CROPPING_TYPE 889 */ 890 public static final int SCALER_CROPPING_TYPE_FREEFORM = 1; 891 892 // 893 // Enumeration values for CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 894 // 895 896 /** 897 * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 898 */ 899 public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB = 0; 900 901 /** 902 * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 903 */ 904 public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG = 1; 905 906 /** 907 * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 908 */ 909 public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG = 2; 910 911 /** 912 * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 913 */ 914 public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR = 3; 915 916 /** 917 * <p>Sensor is not Bayer; output has 3 16-bit 918 * values for each pixel, instead of just 1 16-bit value 919 * per pixel.</p> 920 * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 921 */ 922 public static final int SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB = 4; 923 924 // 925 // Enumeration values for CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE 926 // 927 928 /** 929 * <p>Timestamps from {@link CaptureResult#SENSOR_TIMESTAMP android.sensor.timestamp} are in nanoseconds and monotonic, 930 * but can not be compared to timestamps from other subsystems 931 * (e.g. accelerometer, gyro etc.), or other instances of the same or different 932 * camera devices in the same system. Timestamps between streams and results for 933 * a single camera instance are comparable, and the timestamps for all buffers 934 * and the result metadata generated by a single capture are identical.</p> 935 * 936 * @see CaptureResult#SENSOR_TIMESTAMP 937 * @see CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE 938 */ 939 public static final int SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN = 0; 940 941 /** 942 * <p>Timestamps from {@link CaptureResult#SENSOR_TIMESTAMP android.sensor.timestamp} are in the same timebase as 943 * {@link android.os.SystemClock#elapsedRealtimeNanos }, 944 * and they can be compared to other timestamps using that base.</p> 945 * 946 * @see CaptureResult#SENSOR_TIMESTAMP 947 * @see CameraCharacteristics#SENSOR_INFO_TIMESTAMP_SOURCE 948 */ 949 public static final int SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME = 1; 950 951 // 952 // Enumeration values for CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 953 // 954 955 /** 956 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 957 */ 958 public static final int SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT = 1; 959 960 /** 961 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 962 */ 963 public static final int SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT = 2; 964 965 /** 966 * <p>Incandescent light</p> 967 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 968 */ 969 public static final int SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN = 3; 970 971 /** 972 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 973 */ 974 public static final int SENSOR_REFERENCE_ILLUMINANT1_FLASH = 4; 975 976 /** 977 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 978 */ 979 public static final int SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER = 9; 980 981 /** 982 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 983 */ 984 public static final int SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER = 10; 985 986 /** 987 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 988 */ 989 public static final int SENSOR_REFERENCE_ILLUMINANT1_SHADE = 11; 990 991 /** 992 * <p>D 5700 - 7100K</p> 993 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 994 */ 995 public static final int SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT = 12; 996 997 /** 998 * <p>N 4600 - 5400K</p> 999 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1000 */ 1001 public static final int SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT = 13; 1002 1003 /** 1004 * <p>W 3900 - 4500K</p> 1005 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1006 */ 1007 public static final int SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT = 14; 1008 1009 /** 1010 * <p>WW 3200 - 3700K</p> 1011 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1012 */ 1013 public static final int SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT = 15; 1014 1015 /** 1016 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1017 */ 1018 public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A = 17; 1019 1020 /** 1021 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1022 */ 1023 public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B = 18; 1024 1025 /** 1026 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1027 */ 1028 public static final int SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C = 19; 1029 1030 /** 1031 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1032 */ 1033 public static final int SENSOR_REFERENCE_ILLUMINANT1_D55 = 20; 1034 1035 /** 1036 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1037 */ 1038 public static final int SENSOR_REFERENCE_ILLUMINANT1_D65 = 21; 1039 1040 /** 1041 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1042 */ 1043 public static final int SENSOR_REFERENCE_ILLUMINANT1_D75 = 22; 1044 1045 /** 1046 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1047 */ 1048 public static final int SENSOR_REFERENCE_ILLUMINANT1_D50 = 23; 1049 1050 /** 1051 * @see CameraCharacteristics#SENSOR_REFERENCE_ILLUMINANT1 1052 */ 1053 public static final int SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN = 24; 1054 1055 // 1056 // Enumeration values for CameraCharacteristics#LED_AVAILABLE_LEDS 1057 // 1058 1059 /** 1060 * <p>android.led.transmit control is used.</p> 1061 * @see CameraCharacteristics#LED_AVAILABLE_LEDS 1062 * @hide 1063 */ 1064 public static final int LED_AVAILABLE_LEDS_TRANSMIT = 0; 1065 1066 // 1067 // Enumeration values for CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 1068 // 1069 1070 /** 1071 * <p>This camera device does not have enough capabilities to qualify as a <code>FULL</code> device or 1072 * better.</p> 1073 * <p>Only the stream configurations listed in the <code>LEGACY</code> and <code>LIMITED</code> tables in the 1074 * {@link android.hardware.camera2.CameraDevice#createCaptureSession createCaptureSession} documentation are guaranteed to be supported.</p> 1075 * <p>All <code>LIMITED</code> devices support the <code>BACKWARDS_COMPATIBLE</code> capability, indicating basic 1076 * support for color image capture. The only exception is that the device may 1077 * alternatively support only the <code>DEPTH_OUTPUT</code> capability, if it can only output depth 1078 * measurements and not color images.</p> 1079 * <p><code>LIMITED</code> devices and above require the use of {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} 1080 * to lock exposure metering (and calculate flash power, for cameras with flash) before 1081 * capturing a high-quality still image.</p> 1082 * <p>A <code>LIMITED</code> device that only lists the <code>BACKWARDS_COMPATIBLE</code> capability is only 1083 * required to support full-automatic operation and post-processing (<code>OFF</code> is not 1084 * supported for {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}, {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}, or 1085 * {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode})</p> 1086 * <p>Additional capabilities may optionally be supported by a <code>LIMITED</code>-level device, and 1087 * can be checked for in {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities}.</p> 1088 * 1089 * @see CaptureRequest#CONTROL_AE_MODE 1090 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1091 * @see CaptureRequest#CONTROL_AF_MODE 1092 * @see CaptureRequest#CONTROL_AWB_MODE 1093 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 1094 * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 1095 */ 1096 public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED = 0; 1097 1098 /** 1099 * <p>This camera device is capable of supporting advanced imaging applications.</p> 1100 * <p>The stream configurations listed in the <code>FULL</code>, <code>LEGACY</code> and <code>LIMITED</code> tables in the 1101 * {@link android.hardware.camera2.CameraDevice#createCaptureSession createCaptureSession} documentation are guaranteed to be supported.</p> 1102 * <p>A <code>FULL</code> device will support below capabilities:</p> 1103 * <ul> 1104 * <li><code>BURST_CAPTURE</code> capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains 1105 * <code>BURST_CAPTURE</code>)</li> 1106 * <li>Per frame control ({@link CameraCharacteristics#SYNC_MAX_LATENCY android.sync.maxLatency} <code>==</code> PER_FRAME_CONTROL)</li> 1107 * <li>Manual sensor control ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains <code>MANUAL_SENSOR</code>)</li> 1108 * <li>Manual post-processing control ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains 1109 * <code>MANUAL_POST_PROCESSING</code>)</li> 1110 * <li>The required exposure time range defined in {@link CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE android.sensor.info.exposureTimeRange}</li> 1111 * <li>The required maxFrameDuration defined in {@link CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION android.sensor.info.maxFrameDuration}</li> 1112 * </ul> 1113 * <p>Note: 1114 * Pre-API level 23, FULL devices also supported arbitrary cropping region 1115 * ({@link CameraCharacteristics#SCALER_CROPPING_TYPE android.scaler.croppingType} <code>== FREEFORM</code>); this requirement was relaxed in API level 1116 * 23, and <code>FULL</code> devices may only support <code>CENTERED</code> cropping.</p> 1117 * 1118 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 1119 * @see CameraCharacteristics#SCALER_CROPPING_TYPE 1120 * @see CameraCharacteristics#SENSOR_INFO_EXPOSURE_TIME_RANGE 1121 * @see CameraCharacteristics#SENSOR_INFO_MAX_FRAME_DURATION 1122 * @see CameraCharacteristics#SYNC_MAX_LATENCY 1123 * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 1124 */ 1125 public static final int INFO_SUPPORTED_HARDWARE_LEVEL_FULL = 1; 1126 1127 /** 1128 * <p>This camera device is running in backward compatibility mode.</p> 1129 * <p>Only the stream configurations listed in the <code>LEGACY</code> table in the {@link android.hardware.camera2.CameraDevice#createCaptureSession createCaptureSession} documentation are supported.</p> 1130 * <p>A <code>LEGACY</code> device does not support per-frame control, manual sensor control, manual 1131 * post-processing, arbitrary cropping regions, and has relaxed performance constraints. 1132 * No additional capabilities beyond <code>BACKWARD_COMPATIBLE</code> will ever be listed by a 1133 * <code>LEGACY</code> device in {@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities}.</p> 1134 * <p>In addition, the {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} is not functional on <code>LEGACY</code> 1135 * devices. Instead, every request that includes a JPEG-format output target is treated 1136 * as triggering a still capture, internally executing a precapture trigger. This may 1137 * fire the flash for flash power metering during precapture, and then fire the flash 1138 * for the final capture, if a flash is available on the device and the AE mode is set to 1139 * enable the flash.</p> 1140 * 1141 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1142 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 1143 * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 1144 */ 1145 public static final int INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY = 2; 1146 1147 /** 1148 * <p>This camera device is capable of YUV reprocessing and RAW data capture, in addition to 1149 * FULL-level capabilities.</p> 1150 * <p>The stream configurations listed in the <code>LEVEL_3</code>, <code>RAW</code>, <code>FULL</code>, <code>LEGACY</code> and 1151 * <code>LIMITED</code> tables in the {@link android.hardware.camera2.CameraDevice#createCaptureSession createCaptureSession} documentation are guaranteed to be supported.</p> 1152 * <p>The following additional capabilities are guaranteed to be supported:</p> 1153 * <ul> 1154 * <li><code>YUV_REPROCESSING</code> capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains 1155 * <code>YUV_REPROCESSING</code>)</li> 1156 * <li><code>RAW</code> capability ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} contains 1157 * <code>RAW</code>)</li> 1158 * </ul> 1159 * 1160 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 1161 * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 1162 */ 1163 public static final int INFO_SUPPORTED_HARDWARE_LEVEL_3 = 3; 1164 1165 /** 1166 * <p>This camera device is backed by an external camera connected to this Android device.</p> 1167 * <p>The device has capability identical to a LIMITED level device, with the following 1168 * exceptions:</p> 1169 * <ul> 1170 * <li>The device may not report lens/sensor related information such as<ul> 1171 * <li>{@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}</li> 1172 * <li>{@link CameraCharacteristics#LENS_INFO_HYPERFOCAL_DISTANCE android.lens.info.hyperfocalDistance}</li> 1173 * <li>{@link CameraCharacteristics#SENSOR_INFO_PHYSICAL_SIZE android.sensor.info.physicalSize}</li> 1174 * <li>{@link CameraCharacteristics#SENSOR_INFO_WHITE_LEVEL android.sensor.info.whiteLevel}</li> 1175 * <li>{@link CameraCharacteristics#SENSOR_BLACK_LEVEL_PATTERN android.sensor.blackLevelPattern}</li> 1176 * <li>{@link CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT android.sensor.info.colorFilterArrangement}</li> 1177 * <li>{@link CaptureResult#SENSOR_ROLLING_SHUTTER_SKEW android.sensor.rollingShutterSkew}</li> 1178 * </ul> 1179 * </li> 1180 * <li>The device will report 0 for {@link CameraCharacteristics#SENSOR_ORIENTATION android.sensor.orientation}</li> 1181 * <li>The device has less guarantee on stable framerate, as the framerate partly depends 1182 * on the external camera being used.</li> 1183 * </ul> 1184 * 1185 * @see CaptureRequest#LENS_FOCAL_LENGTH 1186 * @see CameraCharacteristics#LENS_INFO_HYPERFOCAL_DISTANCE 1187 * @see CameraCharacteristics#SENSOR_BLACK_LEVEL_PATTERN 1188 * @see CameraCharacteristics#SENSOR_INFO_COLOR_FILTER_ARRANGEMENT 1189 * @see CameraCharacteristics#SENSOR_INFO_PHYSICAL_SIZE 1190 * @see CameraCharacteristics#SENSOR_INFO_WHITE_LEVEL 1191 * @see CameraCharacteristics#SENSOR_ORIENTATION 1192 * @see CaptureResult#SENSOR_ROLLING_SHUTTER_SKEW 1193 * @see CameraCharacteristics#INFO_SUPPORTED_HARDWARE_LEVEL 1194 */ 1195 public static final int INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL = 4; 1196 1197 // 1198 // Enumeration values for CameraCharacteristics#SYNC_MAX_LATENCY 1199 // 1200 1201 /** 1202 * <p>Every frame has the requests immediately applied.</p> 1203 * <p>Changing controls over multiple requests one after another will 1204 * produce results that have those controls applied atomically 1205 * each frame.</p> 1206 * <p>All FULL capability devices will have this as their maxLatency.</p> 1207 * @see CameraCharacteristics#SYNC_MAX_LATENCY 1208 */ 1209 public static final int SYNC_MAX_LATENCY_PER_FRAME_CONTROL = 0; 1210 1211 /** 1212 * <p>Each new frame has some subset (potentially the entire set) 1213 * of the past requests applied to the camera settings.</p> 1214 * <p>By submitting a series of identical requests, the camera device 1215 * will eventually have the camera settings applied, but it is 1216 * unknown when that exact point will be.</p> 1217 * <p>All LEGACY capability devices will have this as their maxLatency.</p> 1218 * @see CameraCharacteristics#SYNC_MAX_LATENCY 1219 */ 1220 public static final int SYNC_MAX_LATENCY_UNKNOWN = -1; 1221 1222 // 1223 // Enumeration values for CameraCharacteristics#LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE 1224 // 1225 1226 /** 1227 * <p>A software mechanism is used to synchronize between the physical cameras. As a result, 1228 * the timestamp of an image from a physical stream is only an approximation of the 1229 * image sensor start-of-exposure time.</p> 1230 * @see CameraCharacteristics#LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE 1231 */ 1232 public static final int LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE = 0; 1233 1234 /** 1235 * <p>The camera device supports frame timestamp synchronization at the hardware level, 1236 * and the timestamp of a physical stream image accurately reflects its 1237 * start-of-exposure time.</p> 1238 * @see CameraCharacteristics#LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE 1239 */ 1240 public static final int LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED = 1; 1241 1242 // 1243 // Enumeration values for CaptureRequest#COLOR_CORRECTION_MODE 1244 // 1245 1246 /** 1247 * <p>Use the {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} matrix 1248 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} to do color conversion.</p> 1249 * <p>All advanced white balance adjustments (not specified 1250 * by our white balance pipeline) must be disabled.</p> 1251 * <p>If AWB is enabled with <code>{@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != OFF</code>, then 1252 * TRANSFORM_MATRIX is ignored. The camera device will override 1253 * this value to either FAST or HIGH_QUALITY.</p> 1254 * 1255 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1256 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1257 * @see CaptureRequest#CONTROL_AWB_MODE 1258 * @see CaptureRequest#COLOR_CORRECTION_MODE 1259 */ 1260 public static final int COLOR_CORRECTION_MODE_TRANSFORM_MATRIX = 0; 1261 1262 /** 1263 * <p>Color correction processing must not slow down 1264 * capture rate relative to sensor raw output.</p> 1265 * <p>Advanced white balance adjustments above and beyond 1266 * the specified white balance pipeline may be applied.</p> 1267 * <p>If AWB is enabled with <code>{@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != OFF</code>, then 1268 * the camera device uses the last frame's AWB values 1269 * (or defaults if AWB has never been run).</p> 1270 * 1271 * @see CaptureRequest#CONTROL_AWB_MODE 1272 * @see CaptureRequest#COLOR_CORRECTION_MODE 1273 */ 1274 public static final int COLOR_CORRECTION_MODE_FAST = 1; 1275 1276 /** 1277 * <p>Color correction processing operates at improved 1278 * quality but the capture rate might be reduced (relative to sensor 1279 * raw output rate)</p> 1280 * <p>Advanced white balance adjustments above and beyond 1281 * the specified white balance pipeline may be applied.</p> 1282 * <p>If AWB is enabled with <code>{@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode} != OFF</code>, then 1283 * the camera device uses the last frame's AWB values 1284 * (or defaults if AWB has never been run).</p> 1285 * 1286 * @see CaptureRequest#CONTROL_AWB_MODE 1287 * @see CaptureRequest#COLOR_CORRECTION_MODE 1288 */ 1289 public static final int COLOR_CORRECTION_MODE_HIGH_QUALITY = 2; 1290 1291 // 1292 // Enumeration values for CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE 1293 // 1294 1295 /** 1296 * <p>No aberration correction is applied.</p> 1297 * @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE 1298 */ 1299 public static final int COLOR_CORRECTION_ABERRATION_MODE_OFF = 0; 1300 1301 /** 1302 * <p>Aberration correction will not slow down capture rate 1303 * relative to sensor raw output.</p> 1304 * @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE 1305 */ 1306 public static final int COLOR_CORRECTION_ABERRATION_MODE_FAST = 1; 1307 1308 /** 1309 * <p>Aberration correction operates at improved quality but the capture rate might be 1310 * reduced (relative to sensor raw output rate)</p> 1311 * @see CaptureRequest#COLOR_CORRECTION_ABERRATION_MODE 1312 */ 1313 public static final int COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY = 2; 1314 1315 // 1316 // Enumeration values for CaptureRequest#CONTROL_AE_ANTIBANDING_MODE 1317 // 1318 1319 /** 1320 * <p>The camera device will not adjust exposure duration to 1321 * avoid banding problems.</p> 1322 * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE 1323 */ 1324 public static final int CONTROL_AE_ANTIBANDING_MODE_OFF = 0; 1325 1326 /** 1327 * <p>The camera device will adjust exposure duration to 1328 * avoid banding problems with 50Hz illumination sources.</p> 1329 * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE 1330 */ 1331 public static final int CONTROL_AE_ANTIBANDING_MODE_50HZ = 1; 1332 1333 /** 1334 * <p>The camera device will adjust exposure duration to 1335 * avoid banding problems with 60Hz illumination 1336 * sources.</p> 1337 * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE 1338 */ 1339 public static final int CONTROL_AE_ANTIBANDING_MODE_60HZ = 2; 1340 1341 /** 1342 * <p>The camera device will automatically adapt its 1343 * antibanding routine to the current illumination 1344 * condition. This is the default mode if AUTO is 1345 * available on given camera device.</p> 1346 * @see CaptureRequest#CONTROL_AE_ANTIBANDING_MODE 1347 */ 1348 public static final int CONTROL_AE_ANTIBANDING_MODE_AUTO = 3; 1349 1350 // 1351 // Enumeration values for CaptureRequest#CONTROL_AE_MODE 1352 // 1353 1354 /** 1355 * <p>The camera device's autoexposure routine is disabled.</p> 1356 * <p>The application-selected {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, 1357 * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity} and 1358 * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration} are used by the camera 1359 * device, along with android.flash.* fields, if there's 1360 * a flash unit for this camera device.</p> 1361 * <p>Note that auto-white balance (AWB) and auto-focus (AF) 1362 * behavior is device dependent when AE is in OFF mode. 1363 * To have consistent behavior across different devices, 1364 * it is recommended to either set AWB and AF to OFF mode 1365 * or lock AWB and AF before setting AE to OFF. 1366 * See {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}, 1367 * {@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}, and {@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger} 1368 * for more details.</p> 1369 * <p>LEGACY devices do not support the OFF mode and will 1370 * override attempts to use this value to ON.</p> 1371 * 1372 * @see CaptureRequest#CONTROL_AF_MODE 1373 * @see CaptureRequest#CONTROL_AF_TRIGGER 1374 * @see CaptureRequest#CONTROL_AWB_LOCK 1375 * @see CaptureRequest#CONTROL_AWB_MODE 1376 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 1377 * @see CaptureRequest#SENSOR_FRAME_DURATION 1378 * @see CaptureRequest#SENSOR_SENSITIVITY 1379 * @see CaptureRequest#CONTROL_AE_MODE 1380 */ 1381 public static final int CONTROL_AE_MODE_OFF = 0; 1382 1383 /** 1384 * <p>The camera device's autoexposure routine is active, 1385 * with no flash control.</p> 1386 * <p>The application's values for 1387 * {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, 1388 * {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, and 1389 * {@link CaptureRequest#SENSOR_FRAME_DURATION android.sensor.frameDuration} are ignored. The 1390 * application has control over the various 1391 * android.flash.* fields.</p> 1392 * 1393 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 1394 * @see CaptureRequest#SENSOR_FRAME_DURATION 1395 * @see CaptureRequest#SENSOR_SENSITIVITY 1396 * @see CaptureRequest#CONTROL_AE_MODE 1397 */ 1398 public static final int CONTROL_AE_MODE_ON = 1; 1399 1400 /** 1401 * <p>Like ON, except that the camera device also controls 1402 * the camera's flash unit, firing it in low-light 1403 * conditions.</p> 1404 * <p>The flash may be fired during a precapture sequence 1405 * (triggered by {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}) and 1406 * may be fired for captures for which the 1407 * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} field is set to 1408 * STILL_CAPTURE</p> 1409 * 1410 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1411 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1412 * @see CaptureRequest#CONTROL_AE_MODE 1413 */ 1414 public static final int CONTROL_AE_MODE_ON_AUTO_FLASH = 2; 1415 1416 /** 1417 * <p>Like ON, except that the camera device also controls 1418 * the camera's flash unit, always firing it for still 1419 * captures.</p> 1420 * <p>The flash may be fired during a precapture sequence 1421 * (triggered by {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}) and 1422 * will always be fired for captures for which the 1423 * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} field is set to 1424 * STILL_CAPTURE</p> 1425 * 1426 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1427 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1428 * @see CaptureRequest#CONTROL_AE_MODE 1429 */ 1430 public static final int CONTROL_AE_MODE_ON_ALWAYS_FLASH = 3; 1431 1432 /** 1433 * <p>Like ON_AUTO_FLASH, but with automatic red eye 1434 * reduction.</p> 1435 * <p>If deemed necessary by the camera device, a red eye 1436 * reduction flash will fire during the precapture 1437 * sequence.</p> 1438 * @see CaptureRequest#CONTROL_AE_MODE 1439 */ 1440 public static final int CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE = 4; 1441 1442 /** 1443 * <p>An external flash has been turned on.</p> 1444 * <p>It informs the camera device that an external flash has been turned on, and that 1445 * metering (and continuous focus if active) should be quickly recaculated to account 1446 * for the external flash. Otherwise, this mode acts like ON.</p> 1447 * <p>When the external flash is turned off, AE mode should be changed to one of the 1448 * other available AE modes.</p> 1449 * <p>If the camera device supports AE external flash mode, {@link CaptureResult#CONTROL_AE_STATE android.control.aeState} must 1450 * be FLASH_REQUIRED after the camera device finishes AE scan and it's too dark without 1451 * flash.</p> 1452 * 1453 * @see CaptureResult#CONTROL_AE_STATE 1454 * @see CaptureRequest#CONTROL_AE_MODE 1455 */ 1456 public static final int CONTROL_AE_MODE_ON_EXTERNAL_FLASH = 5; 1457 1458 // 1459 // Enumeration values for CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1460 // 1461 1462 /** 1463 * <p>The trigger is idle.</p> 1464 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1465 */ 1466 public static final int CONTROL_AE_PRECAPTURE_TRIGGER_IDLE = 0; 1467 1468 /** 1469 * <p>The precapture metering sequence will be started 1470 * by the camera device.</p> 1471 * <p>The exact effect of the precapture trigger depends on 1472 * the current AE mode and state.</p> 1473 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1474 */ 1475 public static final int CONTROL_AE_PRECAPTURE_TRIGGER_START = 1; 1476 1477 /** 1478 * <p>The camera device will cancel any currently active or completed 1479 * precapture metering sequence, the auto-exposure routine will return to its 1480 * initial state.</p> 1481 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 1482 */ 1483 public static final int CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL = 2; 1484 1485 // 1486 // Enumeration values for CaptureRequest#CONTROL_AF_MODE 1487 // 1488 1489 /** 1490 * <p>The auto-focus routine does not control the lens; 1491 * {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance} is controlled by the 1492 * application.</p> 1493 * 1494 * @see CaptureRequest#LENS_FOCUS_DISTANCE 1495 * @see CaptureRequest#CONTROL_AF_MODE 1496 */ 1497 public static final int CONTROL_AF_MODE_OFF = 0; 1498 1499 /** 1500 * <p>Basic automatic focus mode.</p> 1501 * <p>In this mode, the lens does not move unless 1502 * the autofocus trigger action is called. When that trigger 1503 * is activated, AF will transition to ACTIVE_SCAN, then to 1504 * the outcome of the scan (FOCUSED or NOT_FOCUSED).</p> 1505 * <p>Always supported if lens is not fixed focus.</p> 1506 * <p>Use {@link CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE android.lens.info.minimumFocusDistance} to determine if lens 1507 * is fixed-focus.</p> 1508 * <p>Triggering AF_CANCEL resets the lens position to default, 1509 * and sets the AF state to INACTIVE.</p> 1510 * 1511 * @see CameraCharacteristics#LENS_INFO_MINIMUM_FOCUS_DISTANCE 1512 * @see CaptureRequest#CONTROL_AF_MODE 1513 */ 1514 public static final int CONTROL_AF_MODE_AUTO = 1; 1515 1516 /** 1517 * <p>Close-up focusing mode.</p> 1518 * <p>In this mode, the lens does not move unless the 1519 * autofocus trigger action is called. When that trigger is 1520 * activated, AF will transition to ACTIVE_SCAN, then to 1521 * the outcome of the scan (FOCUSED or NOT_FOCUSED). This 1522 * mode is optimized for focusing on objects very close to 1523 * the camera.</p> 1524 * <p>When that trigger is activated, AF will transition to 1525 * ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or 1526 * NOT_FOCUSED). Triggering cancel AF resets the lens 1527 * position to default, and sets the AF state to 1528 * INACTIVE.</p> 1529 * @see CaptureRequest#CONTROL_AF_MODE 1530 */ 1531 public static final int CONTROL_AF_MODE_MACRO = 2; 1532 1533 /** 1534 * <p>In this mode, the AF algorithm modifies the lens 1535 * position continually to attempt to provide a 1536 * constantly-in-focus image stream.</p> 1537 * <p>The focusing behavior should be suitable for good quality 1538 * video recording; typically this means slower focus 1539 * movement and no overshoots. When the AF trigger is not 1540 * involved, the AF algorithm should start in INACTIVE state, 1541 * and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED 1542 * states as appropriate. When the AF trigger is activated, 1543 * the algorithm should immediately transition into 1544 * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the 1545 * lens position until a cancel AF trigger is received.</p> 1546 * <p>Once cancel is received, the algorithm should transition 1547 * back to INACTIVE and resume passive scan. Note that this 1548 * behavior is not identical to CONTINUOUS_PICTURE, since an 1549 * ongoing PASSIVE_SCAN must immediately be 1550 * canceled.</p> 1551 * @see CaptureRequest#CONTROL_AF_MODE 1552 */ 1553 public static final int CONTROL_AF_MODE_CONTINUOUS_VIDEO = 3; 1554 1555 /** 1556 * <p>In this mode, the AF algorithm modifies the lens 1557 * position continually to attempt to provide a 1558 * constantly-in-focus image stream.</p> 1559 * <p>The focusing behavior should be suitable for still image 1560 * capture; typically this means focusing as fast as 1561 * possible. When the AF trigger is not involved, the AF 1562 * algorithm should start in INACTIVE state, and then 1563 * transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as 1564 * appropriate as it attempts to maintain focus. When the AF 1565 * trigger is activated, the algorithm should finish its 1566 * PASSIVE_SCAN if active, and then transition into 1567 * AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the 1568 * lens position until a cancel AF trigger is received.</p> 1569 * <p>When the AF cancel trigger is activated, the algorithm 1570 * should transition back to INACTIVE and then act as if it 1571 * has just been started.</p> 1572 * @see CaptureRequest#CONTROL_AF_MODE 1573 */ 1574 public static final int CONTROL_AF_MODE_CONTINUOUS_PICTURE = 4; 1575 1576 /** 1577 * <p>Extended depth of field (digital focus) mode.</p> 1578 * <p>The camera device will produce images with an extended 1579 * depth of field automatically; no special focusing 1580 * operations need to be done before taking a picture.</p> 1581 * <p>AF triggers are ignored, and the AF state will always be 1582 * INACTIVE.</p> 1583 * @see CaptureRequest#CONTROL_AF_MODE 1584 */ 1585 public static final int CONTROL_AF_MODE_EDOF = 5; 1586 1587 // 1588 // Enumeration values for CaptureRequest#CONTROL_AF_TRIGGER 1589 // 1590 1591 /** 1592 * <p>The trigger is idle.</p> 1593 * @see CaptureRequest#CONTROL_AF_TRIGGER 1594 */ 1595 public static final int CONTROL_AF_TRIGGER_IDLE = 0; 1596 1597 /** 1598 * <p>Autofocus will trigger now.</p> 1599 * @see CaptureRequest#CONTROL_AF_TRIGGER 1600 */ 1601 public static final int CONTROL_AF_TRIGGER_START = 1; 1602 1603 /** 1604 * <p>Autofocus will return to its initial 1605 * state, and cancel any currently active trigger.</p> 1606 * @see CaptureRequest#CONTROL_AF_TRIGGER 1607 */ 1608 public static final int CONTROL_AF_TRIGGER_CANCEL = 2; 1609 1610 // 1611 // Enumeration values for CaptureRequest#CONTROL_AWB_MODE 1612 // 1613 1614 /** 1615 * <p>The camera device's auto-white balance routine is disabled.</p> 1616 * <p>The application-selected color transform matrix 1617 * ({@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform}) and gains 1618 * ({@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains}) are used by the camera 1619 * device for manual white balance control.</p> 1620 * 1621 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1622 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1623 * @see CaptureRequest#CONTROL_AWB_MODE 1624 */ 1625 public static final int CONTROL_AWB_MODE_OFF = 0; 1626 1627 /** 1628 * <p>The camera device's auto-white balance routine is active.</p> 1629 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1630 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1631 * For devices that support the MANUAL_POST_PROCESSING capability, the 1632 * values used by the camera device for the transform and gains 1633 * will be available in the capture result for this request.</p> 1634 * 1635 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1636 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1637 * @see CaptureRequest#CONTROL_AWB_MODE 1638 */ 1639 public static final int CONTROL_AWB_MODE_AUTO = 1; 1640 1641 /** 1642 * <p>The camera device's auto-white balance routine is disabled; 1643 * the camera device uses incandescent light as the assumed scene 1644 * illumination for white balance.</p> 1645 * <p>While the exact white balance transforms are up to the 1646 * camera device, they will approximately match the CIE 1647 * standard illuminant A.</p> 1648 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1649 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1650 * For devices that support the MANUAL_POST_PROCESSING capability, the 1651 * values used by the camera device for the transform and gains 1652 * will be available in the capture result for this request.</p> 1653 * 1654 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1655 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1656 * @see CaptureRequest#CONTROL_AWB_MODE 1657 */ 1658 public static final int CONTROL_AWB_MODE_INCANDESCENT = 2; 1659 1660 /** 1661 * <p>The camera device's auto-white balance routine is disabled; 1662 * the camera device uses fluorescent light as the assumed scene 1663 * illumination for white balance.</p> 1664 * <p>While the exact white balance transforms are up to the 1665 * camera device, they will approximately match the CIE 1666 * standard illuminant F2.</p> 1667 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1668 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1669 * For devices that support the MANUAL_POST_PROCESSING capability, the 1670 * values used by the camera device for the transform and gains 1671 * will be available in the capture result for this request.</p> 1672 * 1673 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1674 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1675 * @see CaptureRequest#CONTROL_AWB_MODE 1676 */ 1677 public static final int CONTROL_AWB_MODE_FLUORESCENT = 3; 1678 1679 /** 1680 * <p>The camera device's auto-white balance routine is disabled; 1681 * the camera device uses warm fluorescent light as the assumed scene 1682 * illumination for white balance.</p> 1683 * <p>While the exact white balance transforms are up to the 1684 * camera device, they will approximately match the CIE 1685 * standard illuminant F4.</p> 1686 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1687 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1688 * For devices that support the MANUAL_POST_PROCESSING capability, the 1689 * values used by the camera device for the transform and gains 1690 * will be available in the capture result for this request.</p> 1691 * 1692 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1693 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1694 * @see CaptureRequest#CONTROL_AWB_MODE 1695 */ 1696 public static final int CONTROL_AWB_MODE_WARM_FLUORESCENT = 4; 1697 1698 /** 1699 * <p>The camera device's auto-white balance routine is disabled; 1700 * the camera device uses daylight light as the assumed scene 1701 * illumination for white balance.</p> 1702 * <p>While the exact white balance transforms are up to the 1703 * camera device, they will approximately match the CIE 1704 * standard illuminant D65.</p> 1705 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1706 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1707 * For devices that support the MANUAL_POST_PROCESSING capability, the 1708 * values used by the camera device for the transform and gains 1709 * will be available in the capture result for this request.</p> 1710 * 1711 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1712 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1713 * @see CaptureRequest#CONTROL_AWB_MODE 1714 */ 1715 public static final int CONTROL_AWB_MODE_DAYLIGHT = 5; 1716 1717 /** 1718 * <p>The camera device's auto-white balance routine is disabled; 1719 * the camera device uses cloudy daylight light as the assumed scene 1720 * illumination for white balance.</p> 1721 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1722 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1723 * For devices that support the MANUAL_POST_PROCESSING capability, the 1724 * values used by the camera device for the transform and gains 1725 * will be available in the capture result for this request.</p> 1726 * 1727 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1728 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1729 * @see CaptureRequest#CONTROL_AWB_MODE 1730 */ 1731 public static final int CONTROL_AWB_MODE_CLOUDY_DAYLIGHT = 6; 1732 1733 /** 1734 * <p>The camera device's auto-white balance routine is disabled; 1735 * the camera device uses twilight light as the assumed scene 1736 * illumination for white balance.</p> 1737 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1738 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1739 * For devices that support the MANUAL_POST_PROCESSING capability, the 1740 * values used by the camera device for the transform and gains 1741 * will be available in the capture result for this request.</p> 1742 * 1743 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1744 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1745 * @see CaptureRequest#CONTROL_AWB_MODE 1746 */ 1747 public static final int CONTROL_AWB_MODE_TWILIGHT = 7; 1748 1749 /** 1750 * <p>The camera device's auto-white balance routine is disabled; 1751 * the camera device uses shade light as the assumed scene 1752 * illumination for white balance.</p> 1753 * <p>The application's values for {@link CaptureRequest#COLOR_CORRECTION_TRANSFORM android.colorCorrection.transform} 1754 * and {@link CaptureRequest#COLOR_CORRECTION_GAINS android.colorCorrection.gains} are ignored. 1755 * For devices that support the MANUAL_POST_PROCESSING capability, the 1756 * values used by the camera device for the transform and gains 1757 * will be available in the capture result for this request.</p> 1758 * 1759 * @see CaptureRequest#COLOR_CORRECTION_GAINS 1760 * @see CaptureRequest#COLOR_CORRECTION_TRANSFORM 1761 * @see CaptureRequest#CONTROL_AWB_MODE 1762 */ 1763 public static final int CONTROL_AWB_MODE_SHADE = 8; 1764 1765 // 1766 // Enumeration values for CaptureRequest#CONTROL_CAPTURE_INTENT 1767 // 1768 1769 /** 1770 * <p>The goal of this request doesn't fall into the other 1771 * categories. The camera device will default to preview-like 1772 * behavior.</p> 1773 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1774 */ 1775 public static final int CONTROL_CAPTURE_INTENT_CUSTOM = 0; 1776 1777 /** 1778 * <p>This request is for a preview-like use case.</p> 1779 * <p>The precapture trigger may be used to start off a metering 1780 * w/flash sequence.</p> 1781 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1782 */ 1783 public static final int CONTROL_CAPTURE_INTENT_PREVIEW = 1; 1784 1785 /** 1786 * <p>This request is for a still capture-type 1787 * use case.</p> 1788 * <p>If the flash unit is under automatic control, it may fire as needed.</p> 1789 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1790 */ 1791 public static final int CONTROL_CAPTURE_INTENT_STILL_CAPTURE = 2; 1792 1793 /** 1794 * <p>This request is for a video recording 1795 * use case.</p> 1796 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1797 */ 1798 public static final int CONTROL_CAPTURE_INTENT_VIDEO_RECORD = 3; 1799 1800 /** 1801 * <p>This request is for a video snapshot (still 1802 * image while recording video) use case.</p> 1803 * <p>The camera device should take the highest-quality image 1804 * possible (given the other settings) without disrupting the 1805 * frame rate of video recording. </p> 1806 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1807 */ 1808 public static final int CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT = 4; 1809 1810 /** 1811 * <p>This request is for a ZSL usecase; the 1812 * application will stream full-resolution images and 1813 * reprocess one or several later for a final 1814 * capture.</p> 1815 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1816 */ 1817 public static final int CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG = 5; 1818 1819 /** 1820 * <p>This request is for manual capture use case where 1821 * the applications want to directly control the capture parameters.</p> 1822 * <p>For example, the application may wish to manually control 1823 * {@link CaptureRequest#SENSOR_EXPOSURE_TIME android.sensor.exposureTime}, {@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}, etc.</p> 1824 * 1825 * @see CaptureRequest#SENSOR_EXPOSURE_TIME 1826 * @see CaptureRequest#SENSOR_SENSITIVITY 1827 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1828 */ 1829 public static final int CONTROL_CAPTURE_INTENT_MANUAL = 6; 1830 1831 /** 1832 * <p>This request is for a motion tracking use case, where 1833 * the application will use camera and inertial sensor data to 1834 * locate and track objects in the world.</p> 1835 * <p>The camera device auto-exposure routine will limit the exposure time 1836 * of the camera to no more than 20 milliseconds, to minimize motion blur.</p> 1837 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1838 */ 1839 public static final int CONTROL_CAPTURE_INTENT_MOTION_TRACKING = 7; 1840 1841 // 1842 // Enumeration values for CaptureRequest#CONTROL_EFFECT_MODE 1843 // 1844 1845 /** 1846 * <p>No color effect will be applied.</p> 1847 * @see CaptureRequest#CONTROL_EFFECT_MODE 1848 */ 1849 public static final int CONTROL_EFFECT_MODE_OFF = 0; 1850 1851 /** 1852 * <p>A "monocolor" effect where the image is mapped into 1853 * a single color.</p> 1854 * <p>This will typically be grayscale.</p> 1855 * @see CaptureRequest#CONTROL_EFFECT_MODE 1856 */ 1857 public static final int CONTROL_EFFECT_MODE_MONO = 1; 1858 1859 /** 1860 * <p>A "photo-negative" effect where the image's colors 1861 * are inverted.</p> 1862 * @see CaptureRequest#CONTROL_EFFECT_MODE 1863 */ 1864 public static final int CONTROL_EFFECT_MODE_NEGATIVE = 2; 1865 1866 /** 1867 * <p>A "solarisation" effect (Sabattier effect) where the 1868 * image is wholly or partially reversed in 1869 * tone.</p> 1870 * @see CaptureRequest#CONTROL_EFFECT_MODE 1871 */ 1872 public static final int CONTROL_EFFECT_MODE_SOLARIZE = 3; 1873 1874 /** 1875 * <p>A "sepia" effect where the image is mapped into warm 1876 * gray, red, and brown tones.</p> 1877 * @see CaptureRequest#CONTROL_EFFECT_MODE 1878 */ 1879 public static final int CONTROL_EFFECT_MODE_SEPIA = 4; 1880 1881 /** 1882 * <p>A "posterization" effect where the image uses 1883 * discrete regions of tone rather than a continuous 1884 * gradient of tones.</p> 1885 * @see CaptureRequest#CONTROL_EFFECT_MODE 1886 */ 1887 public static final int CONTROL_EFFECT_MODE_POSTERIZE = 5; 1888 1889 /** 1890 * <p>A "whiteboard" effect where the image is typically displayed 1891 * as regions of white, with black or grey details.</p> 1892 * @see CaptureRequest#CONTROL_EFFECT_MODE 1893 */ 1894 public static final int CONTROL_EFFECT_MODE_WHITEBOARD = 6; 1895 1896 /** 1897 * <p>A "blackboard" effect where the image is typically displayed 1898 * as regions of black, with white or grey details.</p> 1899 * @see CaptureRequest#CONTROL_EFFECT_MODE 1900 */ 1901 public static final int CONTROL_EFFECT_MODE_BLACKBOARD = 7; 1902 1903 /** 1904 * <p>An "aqua" effect where a blue hue is added to the image.</p> 1905 * @see CaptureRequest#CONTROL_EFFECT_MODE 1906 */ 1907 public static final int CONTROL_EFFECT_MODE_AQUA = 8; 1908 1909 // 1910 // Enumeration values for CaptureRequest#CONTROL_MODE 1911 // 1912 1913 /** 1914 * <p>Full application control of pipeline.</p> 1915 * <p>All control by the device's metering and focusing (3A) 1916 * routines is disabled, and no other settings in 1917 * android.control.* have any effect, except that 1918 * {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} may be used by the camera 1919 * device to select post-processing values for processing 1920 * blocks that do not allow for manual control, or are not 1921 * exposed by the camera API.</p> 1922 * <p>However, the camera device's 3A routines may continue to 1923 * collect statistics and update their internal state so that 1924 * when control is switched to AUTO mode, good control values 1925 * can be immediately applied.</p> 1926 * 1927 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 1928 * @see CaptureRequest#CONTROL_MODE 1929 */ 1930 public static final int CONTROL_MODE_OFF = 0; 1931 1932 /** 1933 * <p>Use settings for each individual 3A routine.</p> 1934 * <p>Manual control of capture parameters is disabled. All 1935 * controls in android.control.* besides sceneMode take 1936 * effect.</p> 1937 * @see CaptureRequest#CONTROL_MODE 1938 */ 1939 public static final int CONTROL_MODE_AUTO = 1; 1940 1941 /** 1942 * <p>Use a specific scene mode.</p> 1943 * <p>Enabling this disables control.aeMode, control.awbMode and 1944 * control.afMode controls; the camera device will ignore 1945 * those settings while USE_SCENE_MODE is active (except for 1946 * FACE_PRIORITY scene mode). Other control entries are still active. 1947 * This setting can only be used if scene mode is supported (i.e. 1948 * {@link CameraCharacteristics#CONTROL_AVAILABLE_SCENE_MODES android.control.availableSceneModes} 1949 * contain some modes other than DISABLED).</p> 1950 * 1951 * @see CameraCharacteristics#CONTROL_AVAILABLE_SCENE_MODES 1952 * @see CaptureRequest#CONTROL_MODE 1953 */ 1954 public static final int CONTROL_MODE_USE_SCENE_MODE = 2; 1955 1956 /** 1957 * <p>Same as OFF mode, except that this capture will not be 1958 * used by camera device background auto-exposure, auto-white balance and 1959 * auto-focus algorithms (3A) to update their statistics.</p> 1960 * <p>Specifically, the 3A routines are locked to the last 1961 * values set from a request with AUTO, OFF, or 1962 * USE_SCENE_MODE, and any statistics or state updates 1963 * collected from manual captures with OFF_KEEP_STATE will be 1964 * discarded by the camera device.</p> 1965 * @see CaptureRequest#CONTROL_MODE 1966 */ 1967 public static final int CONTROL_MODE_OFF_KEEP_STATE = 3; 1968 1969 // 1970 // Enumeration values for CaptureRequest#CONTROL_SCENE_MODE 1971 // 1972 1973 /** 1974 * <p>Indicates that no scene modes are set for a given capture request.</p> 1975 * @see CaptureRequest#CONTROL_SCENE_MODE 1976 */ 1977 public static final int CONTROL_SCENE_MODE_DISABLED = 0; 1978 1979 /** 1980 * <p>If face detection support exists, use face 1981 * detection data for auto-focus, auto-white balance, and 1982 * auto-exposure routines.</p> 1983 * <p>If face detection statistics are disabled 1984 * (i.e. {@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode} is set to OFF), 1985 * this should still operate correctly (but will not return 1986 * face detection statistics to the framework).</p> 1987 * <p>Unlike the other scene modes, {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}, 1988 * {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, and {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} 1989 * remain active when FACE_PRIORITY is set.</p> 1990 * 1991 * @see CaptureRequest#CONTROL_AE_MODE 1992 * @see CaptureRequest#CONTROL_AF_MODE 1993 * @see CaptureRequest#CONTROL_AWB_MODE 1994 * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE 1995 * @see CaptureRequest#CONTROL_SCENE_MODE 1996 */ 1997 public static final int CONTROL_SCENE_MODE_FACE_PRIORITY = 1; 1998 1999 /** 2000 * <p>Optimized for photos of quickly moving objects.</p> 2001 * <p>Similar to SPORTS.</p> 2002 * @see CaptureRequest#CONTROL_SCENE_MODE 2003 */ 2004 public static final int CONTROL_SCENE_MODE_ACTION = 2; 2005 2006 /** 2007 * <p>Optimized for still photos of people.</p> 2008 * @see CaptureRequest#CONTROL_SCENE_MODE 2009 */ 2010 public static final int CONTROL_SCENE_MODE_PORTRAIT = 3; 2011 2012 /** 2013 * <p>Optimized for photos of distant macroscopic objects.</p> 2014 * @see CaptureRequest#CONTROL_SCENE_MODE 2015 */ 2016 public static final int CONTROL_SCENE_MODE_LANDSCAPE = 4; 2017 2018 /** 2019 * <p>Optimized for low-light settings.</p> 2020 * @see CaptureRequest#CONTROL_SCENE_MODE 2021 */ 2022 public static final int CONTROL_SCENE_MODE_NIGHT = 5; 2023 2024 /** 2025 * <p>Optimized for still photos of people in low-light 2026 * settings.</p> 2027 * @see CaptureRequest#CONTROL_SCENE_MODE 2028 */ 2029 public static final int CONTROL_SCENE_MODE_NIGHT_PORTRAIT = 6; 2030 2031 /** 2032 * <p>Optimized for dim, indoor settings where flash must 2033 * remain off.</p> 2034 * @see CaptureRequest#CONTROL_SCENE_MODE 2035 */ 2036 public static final int CONTROL_SCENE_MODE_THEATRE = 7; 2037 2038 /** 2039 * <p>Optimized for bright, outdoor beach settings.</p> 2040 * @see CaptureRequest#CONTROL_SCENE_MODE 2041 */ 2042 public static final int CONTROL_SCENE_MODE_BEACH = 8; 2043 2044 /** 2045 * <p>Optimized for bright, outdoor settings containing snow.</p> 2046 * @see CaptureRequest#CONTROL_SCENE_MODE 2047 */ 2048 public static final int CONTROL_SCENE_MODE_SNOW = 9; 2049 2050 /** 2051 * <p>Optimized for scenes of the setting sun.</p> 2052 * @see CaptureRequest#CONTROL_SCENE_MODE 2053 */ 2054 public static final int CONTROL_SCENE_MODE_SUNSET = 10; 2055 2056 /** 2057 * <p>Optimized to avoid blurry photos due to small amounts of 2058 * device motion (for example: due to hand shake).</p> 2059 * @see CaptureRequest#CONTROL_SCENE_MODE 2060 */ 2061 public static final int CONTROL_SCENE_MODE_STEADYPHOTO = 11; 2062 2063 /** 2064 * <p>Optimized for nighttime photos of fireworks.</p> 2065 * @see CaptureRequest#CONTROL_SCENE_MODE 2066 */ 2067 public static final int CONTROL_SCENE_MODE_FIREWORKS = 12; 2068 2069 /** 2070 * <p>Optimized for photos of quickly moving people.</p> 2071 * <p>Similar to ACTION.</p> 2072 * @see CaptureRequest#CONTROL_SCENE_MODE 2073 */ 2074 public static final int CONTROL_SCENE_MODE_SPORTS = 13; 2075 2076 /** 2077 * <p>Optimized for dim, indoor settings with multiple moving 2078 * people.</p> 2079 * @see CaptureRequest#CONTROL_SCENE_MODE 2080 */ 2081 public static final int CONTROL_SCENE_MODE_PARTY = 14; 2082 2083 /** 2084 * <p>Optimized for dim settings where the main light source 2085 * is a flame.</p> 2086 * @see CaptureRequest#CONTROL_SCENE_MODE 2087 */ 2088 public static final int CONTROL_SCENE_MODE_CANDLELIGHT = 15; 2089 2090 /** 2091 * <p>Optimized for accurately capturing a photo of barcode 2092 * for use by camera applications that wish to read the 2093 * barcode value.</p> 2094 * @see CaptureRequest#CONTROL_SCENE_MODE 2095 */ 2096 public static final int CONTROL_SCENE_MODE_BARCODE = 16; 2097 2098 /** 2099 * <p>This is deprecated, please use {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession } 2100 * and {@link android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList } 2101 * for high speed video recording.</p> 2102 * <p>Optimized for high speed video recording (frame rate >=60fps) use case.</p> 2103 * <p>The supported high speed video sizes and fps ranges are specified in 2104 * android.control.availableHighSpeedVideoConfigurations. To get desired 2105 * output frame rates, the application is only allowed to select video size 2106 * and fps range combinations listed in this static metadata. The fps range 2107 * can be control via {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange}.</p> 2108 * <p>In this mode, the camera device will override aeMode, awbMode, and afMode to 2109 * ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing block mode 2110 * controls will be overridden to be FAST. Therefore, no manual control of capture 2111 * and post-processing parameters is possible. All other controls operate the 2112 * same as when {@link CaptureRequest#CONTROL_MODE android.control.mode} == AUTO. This means that all other 2113 * android.control.* fields continue to work, such as</p> 2114 * <ul> 2115 * <li>{@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange}</li> 2116 * <li>{@link CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION android.control.aeExposureCompensation}</li> 2117 * <li>{@link CaptureRequest#CONTROL_AE_LOCK android.control.aeLock}</li> 2118 * <li>{@link CaptureRequest#CONTROL_AWB_LOCK android.control.awbLock}</li> 2119 * <li>{@link CaptureRequest#CONTROL_EFFECT_MODE android.control.effectMode}</li> 2120 * <li>{@link CaptureRequest#CONTROL_AE_REGIONS android.control.aeRegions}</li> 2121 * <li>{@link CaptureRequest#CONTROL_AF_REGIONS android.control.afRegions}</li> 2122 * <li>{@link CaptureRequest#CONTROL_AWB_REGIONS android.control.awbRegions}</li> 2123 * <li>{@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}</li> 2124 * <li>{@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger}</li> 2125 * </ul> 2126 * <p>Outside of android.control.*, the following controls will work:</p> 2127 * <ul> 2128 * <li>{@link CaptureRequest#FLASH_MODE android.flash.mode} (automatic flash for still capture will not work since aeMode is ON)</li> 2129 * <li>{@link CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE android.lens.opticalStabilizationMode} (if it is supported)</li> 2130 * <li>{@link CaptureRequest#SCALER_CROP_REGION android.scaler.cropRegion}</li> 2131 * <li>{@link CaptureRequest#STATISTICS_FACE_DETECT_MODE android.statistics.faceDetectMode}</li> 2132 * </ul> 2133 * <p>For high speed recording use case, the actual maximum supported frame rate may 2134 * be lower than what camera can output, depending on the destination Surfaces for 2135 * the image data. For example, if the destination surface is from video encoder, 2136 * the application need check if the video encoder is capable of supporting the 2137 * high frame rate for a given video size, or it will end up with lower recording 2138 * frame rate. If the destination surface is from preview window, the preview frame 2139 * rate will be bounded by the screen refresh rate.</p> 2140 * <p>The camera device will only support up to 2 output high speed streams 2141 * (processed non-stalling format defined in android.request.maxNumOutputStreams) 2142 * in this mode. This control will be effective only if all of below conditions are true:</p> 2143 * <ul> 2144 * <li>The application created no more than maxNumHighSpeedStreams processed non-stalling 2145 * format output streams, where maxNumHighSpeedStreams is calculated as 2146 * min(2, android.request.maxNumOutputStreams[Processed (but not-stalling)]).</li> 2147 * <li>The stream sizes are selected from the sizes reported by 2148 * android.control.availableHighSpeedVideoConfigurations.</li> 2149 * <li>No processed non-stalling or raw streams are configured.</li> 2150 * </ul> 2151 * <p>When above conditions are NOT satistied, the controls of this mode and 2152 * {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange} will be ignored by the camera device, 2153 * the camera device will fall back to {@link CaptureRequest#CONTROL_MODE android.control.mode} <code>==</code> AUTO, 2154 * and the returned capture result metadata will give the fps range choosen 2155 * by the camera device.</p> 2156 * <p>Switching into or out of this mode may trigger some camera ISP/sensor 2157 * reconfigurations, which may introduce extra latency. It is recommended that 2158 * the application avoids unnecessary scene mode switch as much as possible.</p> 2159 * 2160 * @see CaptureRequest#CONTROL_AE_EXPOSURE_COMPENSATION 2161 * @see CaptureRequest#CONTROL_AE_LOCK 2162 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 2163 * @see CaptureRequest#CONTROL_AE_REGIONS 2164 * @see CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE 2165 * @see CaptureRequest#CONTROL_AF_REGIONS 2166 * @see CaptureRequest#CONTROL_AF_TRIGGER 2167 * @see CaptureRequest#CONTROL_AWB_LOCK 2168 * @see CaptureRequest#CONTROL_AWB_REGIONS 2169 * @see CaptureRequest#CONTROL_EFFECT_MODE 2170 * @see CaptureRequest#CONTROL_MODE 2171 * @see CaptureRequest#FLASH_MODE 2172 * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE 2173 * @see CaptureRequest#SCALER_CROP_REGION 2174 * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE 2175 * @see CaptureRequest#CONTROL_SCENE_MODE 2176 * @deprecated Please refer to this API documentation to find the alternatives 2177 */ 2178 @Deprecated 2179 public static final int CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO = 17; 2180 2181 /** 2182 * <p>Turn on a device-specific high dynamic range (HDR) mode.</p> 2183 * <p>In this scene mode, the camera device captures images 2184 * that keep a larger range of scene illumination levels 2185 * visible in the final image. For example, when taking a 2186 * picture of a object in front of a bright window, both 2187 * the object and the scene through the window may be 2188 * visible when using HDR mode, while in normal AUTO mode, 2189 * one or the other may be poorly exposed. As a tradeoff, 2190 * HDR mode generally takes much longer to capture a single 2191 * image, has no user control, and may have other artifacts 2192 * depending on the HDR method used.</p> 2193 * <p>Therefore, HDR captures operate at a much slower rate 2194 * than regular captures.</p> 2195 * <p>In this mode, on LIMITED or FULL devices, when a request 2196 * is made with a {@link CaptureRequest#CONTROL_CAPTURE_INTENT android.control.captureIntent} of 2197 * STILL_CAPTURE, the camera device will capture an image 2198 * using a high dynamic range capture technique. On LEGACY 2199 * devices, captures that target a JPEG-format output will 2200 * be captured with HDR, and the capture intent is not 2201 * relevant.</p> 2202 * <p>The HDR capture may involve the device capturing a burst 2203 * of images internally and combining them into one, or it 2204 * may involve the device using specialized high dynamic 2205 * range capture hardware. In all cases, a single image is 2206 * produced in response to a capture request submitted 2207 * while in HDR mode.</p> 2208 * <p>Since substantial post-processing is generally needed to 2209 * produce an HDR image, only YUV, PRIVATE, and JPEG 2210 * outputs are supported for LIMITED/FULL device HDR 2211 * captures, and only JPEG outputs are supported for LEGACY 2212 * HDR captures. Using a RAW output for HDR capture is not 2213 * supported.</p> 2214 * <p>Some devices may also support always-on HDR, which 2215 * applies HDR processing at full frame rate. For these 2216 * devices, intents other than STILL_CAPTURE will also 2217 * produce an HDR output with no frame rate impact compared 2218 * to normal operation, though the quality may be lower 2219 * than for STILL_CAPTURE intents.</p> 2220 * <p>If SCENE_MODE_HDR is used with unsupported output types 2221 * or capture intents, the images captured will be as if 2222 * the SCENE_MODE was not enabled at all.</p> 2223 * 2224 * @see CaptureRequest#CONTROL_CAPTURE_INTENT 2225 * @see CaptureRequest#CONTROL_SCENE_MODE 2226 */ 2227 public static final int CONTROL_SCENE_MODE_HDR = 18; 2228 2229 /** 2230 * <p>Same as FACE_PRIORITY scene mode, except that the camera 2231 * device will choose higher sensitivity values ({@link CaptureRequest#SENSOR_SENSITIVITY android.sensor.sensitivity}) 2232 * under low light conditions.</p> 2233 * <p>The camera device may be tuned to expose the images in a reduced 2234 * sensitivity range to produce the best quality images. For example, 2235 * if the {@link CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE android.sensor.info.sensitivityRange} gives range of [100, 1600], 2236 * the camera device auto-exposure routine tuning process may limit the actual 2237 * exposure sensitivity range to [100, 1200] to ensure that the noise level isn't 2238 * exessive in order to preserve the image quality. Under this situation, the image under 2239 * low light may be under-exposed when the sensor max exposure time (bounded by the 2240 * {@link CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE android.control.aeTargetFpsRange} when {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode} is one of the 2241 * ON_* modes) and effective max sensitivity are reached. This scene mode allows the 2242 * camera device auto-exposure routine to increase the sensitivity up to the max 2243 * sensitivity specified by {@link CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE android.sensor.info.sensitivityRange} when the scene is too 2244 * dark and the max exposure time is reached. The captured images may be noisier 2245 * compared with the images captured in normal FACE_PRIORITY mode; therefore, it is 2246 * recommended that the application only use this scene mode when it is capable of 2247 * reducing the noise level of the captured images.</p> 2248 * <p>Unlike the other scene modes, {@link CaptureRequest#CONTROL_AE_MODE android.control.aeMode}, 2249 * {@link CaptureRequest#CONTROL_AWB_MODE android.control.awbMode}, and {@link CaptureRequest#CONTROL_AF_MODE android.control.afMode} 2250 * remain active when FACE_PRIORITY_LOW_LIGHT is set.</p> 2251 * 2252 * @see CaptureRequest#CONTROL_AE_MODE 2253 * @see CaptureRequest#CONTROL_AE_TARGET_FPS_RANGE 2254 * @see CaptureRequest#CONTROL_AF_MODE 2255 * @see CaptureRequest#CONTROL_AWB_MODE 2256 * @see CameraCharacteristics#SENSOR_INFO_SENSITIVITY_RANGE 2257 * @see CaptureRequest#SENSOR_SENSITIVITY 2258 * @see CaptureRequest#CONTROL_SCENE_MODE 2259 * @hide 2260 */ 2261 public static final int CONTROL_SCENE_MODE_FACE_PRIORITY_LOW_LIGHT = 19; 2262 2263 /** 2264 * <p>Scene mode values within the range of 2265 * <code>[DEVICE_CUSTOM_START, DEVICE_CUSTOM_END]</code> are reserved for device specific 2266 * customized scene modes.</p> 2267 * @see CaptureRequest#CONTROL_SCENE_MODE 2268 * @hide 2269 */ 2270 public static final int CONTROL_SCENE_MODE_DEVICE_CUSTOM_START = 100; 2271 2272 /** 2273 * <p>Scene mode values within the range of 2274 * <code>[DEVICE_CUSTOM_START, DEVICE_CUSTOM_END]</code> are reserved for device specific 2275 * customized scene modes.</p> 2276 * @see CaptureRequest#CONTROL_SCENE_MODE 2277 * @hide 2278 */ 2279 public static final int CONTROL_SCENE_MODE_DEVICE_CUSTOM_END = 127; 2280 2281 // 2282 // Enumeration values for CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE 2283 // 2284 2285 /** 2286 * <p>Video stabilization is disabled.</p> 2287 * @see CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE 2288 */ 2289 public static final int CONTROL_VIDEO_STABILIZATION_MODE_OFF = 0; 2290 2291 /** 2292 * <p>Video stabilization is enabled.</p> 2293 * @see CaptureRequest#CONTROL_VIDEO_STABILIZATION_MODE 2294 */ 2295 public static final int CONTROL_VIDEO_STABILIZATION_MODE_ON = 1; 2296 2297 // 2298 // Enumeration values for CaptureRequest#EDGE_MODE 2299 // 2300 2301 /** 2302 * <p>No edge enhancement is applied.</p> 2303 * @see CaptureRequest#EDGE_MODE 2304 */ 2305 public static final int EDGE_MODE_OFF = 0; 2306 2307 /** 2308 * <p>Apply edge enhancement at a quality level that does not slow down frame rate 2309 * relative to sensor output. It may be the same as OFF if edge enhancement will 2310 * slow down frame rate relative to sensor.</p> 2311 * @see CaptureRequest#EDGE_MODE 2312 */ 2313 public static final int EDGE_MODE_FAST = 1; 2314 2315 /** 2316 * <p>Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.</p> 2317 * @see CaptureRequest#EDGE_MODE 2318 */ 2319 public static final int EDGE_MODE_HIGH_QUALITY = 2; 2320 2321 /** 2322 * <p>Edge enhancement is applied at different 2323 * levels for different output streams, based on resolution. Streams at maximum recording 2324 * resolution (see {@link android.hardware.camera2.CameraDevice#createCaptureSession }) 2325 * or below have edge enhancement applied, while higher-resolution streams have no edge 2326 * enhancement applied. The level of edge enhancement for low-resolution streams is tuned 2327 * so that frame rate is not impacted, and the quality is equal to or better than FAST 2328 * (since it is only applied to lower-resolution outputs, quality may improve from FAST).</p> 2329 * <p>This mode is intended to be used by applications operating in a zero-shutter-lag mode 2330 * with YUV or PRIVATE reprocessing, where the application continuously captures 2331 * high-resolution intermediate buffers into a circular buffer, from which a final image is 2332 * produced via reprocessing when a user takes a picture. For such a use case, the 2333 * high-resolution buffers must not have edge enhancement applied to maximize efficiency of 2334 * preview and to avoid double-applying enhancement when reprocessed, while low-resolution 2335 * buffers (used for recording or preview, generally) need edge enhancement applied for 2336 * reasonable preview quality.</p> 2337 * <p>This mode is guaranteed to be supported by devices that support either the 2338 * YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities 2339 * ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} lists either of those capabilities) and it will 2340 * be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.</p> 2341 * 2342 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 2343 * @see CaptureRequest#EDGE_MODE 2344 */ 2345 public static final int EDGE_MODE_ZERO_SHUTTER_LAG = 3; 2346 2347 // 2348 // Enumeration values for CaptureRequest#FLASH_MODE 2349 // 2350 2351 /** 2352 * <p>Do not fire the flash for this capture.</p> 2353 * @see CaptureRequest#FLASH_MODE 2354 */ 2355 public static final int FLASH_MODE_OFF = 0; 2356 2357 /** 2358 * <p>If the flash is available and charged, fire flash 2359 * for this capture.</p> 2360 * @see CaptureRequest#FLASH_MODE 2361 */ 2362 public static final int FLASH_MODE_SINGLE = 1; 2363 2364 /** 2365 * <p>Transition flash to continuously on.</p> 2366 * @see CaptureRequest#FLASH_MODE 2367 */ 2368 public static final int FLASH_MODE_TORCH = 2; 2369 2370 // 2371 // Enumeration values for CaptureRequest#HOT_PIXEL_MODE 2372 // 2373 2374 /** 2375 * <p>No hot pixel correction is applied.</p> 2376 * <p>The frame rate must not be reduced relative to sensor raw output 2377 * for this option.</p> 2378 * <p>The hotpixel map may be returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}.</p> 2379 * 2380 * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP 2381 * @see CaptureRequest#HOT_PIXEL_MODE 2382 */ 2383 public static final int HOT_PIXEL_MODE_OFF = 0; 2384 2385 /** 2386 * <p>Hot pixel correction is applied, without reducing frame 2387 * rate relative to sensor raw output.</p> 2388 * <p>The hotpixel map may be returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}.</p> 2389 * 2390 * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP 2391 * @see CaptureRequest#HOT_PIXEL_MODE 2392 */ 2393 public static final int HOT_PIXEL_MODE_FAST = 1; 2394 2395 /** 2396 * <p>High-quality hot pixel correction is applied, at a cost 2397 * of possibly reduced frame rate relative to sensor raw output.</p> 2398 * <p>The hotpixel map may be returned in {@link CaptureResult#STATISTICS_HOT_PIXEL_MAP android.statistics.hotPixelMap}.</p> 2399 * 2400 * @see CaptureResult#STATISTICS_HOT_PIXEL_MAP 2401 * @see CaptureRequest#HOT_PIXEL_MODE 2402 */ 2403 public static final int HOT_PIXEL_MODE_HIGH_QUALITY = 2; 2404 2405 // 2406 // Enumeration values for CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE 2407 // 2408 2409 /** 2410 * <p>Optical stabilization is unavailable.</p> 2411 * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE 2412 */ 2413 public static final int LENS_OPTICAL_STABILIZATION_MODE_OFF = 0; 2414 2415 /** 2416 * <p>Optical stabilization is enabled.</p> 2417 * @see CaptureRequest#LENS_OPTICAL_STABILIZATION_MODE 2418 */ 2419 public static final int LENS_OPTICAL_STABILIZATION_MODE_ON = 1; 2420 2421 // 2422 // Enumeration values for CaptureRequest#NOISE_REDUCTION_MODE 2423 // 2424 2425 /** 2426 * <p>No noise reduction is applied.</p> 2427 * @see CaptureRequest#NOISE_REDUCTION_MODE 2428 */ 2429 public static final int NOISE_REDUCTION_MODE_OFF = 0; 2430 2431 /** 2432 * <p>Noise reduction is applied without reducing frame rate relative to sensor 2433 * output. It may be the same as OFF if noise reduction will reduce frame rate 2434 * relative to sensor.</p> 2435 * @see CaptureRequest#NOISE_REDUCTION_MODE 2436 */ 2437 public static final int NOISE_REDUCTION_MODE_FAST = 1; 2438 2439 /** 2440 * <p>High-quality noise reduction is applied, at the cost of possibly reduced frame 2441 * rate relative to sensor output.</p> 2442 * @see CaptureRequest#NOISE_REDUCTION_MODE 2443 */ 2444 public static final int NOISE_REDUCTION_MODE_HIGH_QUALITY = 2; 2445 2446 /** 2447 * <p>MINIMAL noise reduction is applied without reducing frame rate relative to 2448 * sensor output. </p> 2449 * @see CaptureRequest#NOISE_REDUCTION_MODE 2450 */ 2451 public static final int NOISE_REDUCTION_MODE_MINIMAL = 3; 2452 2453 /** 2454 * <p>Noise reduction is applied at different levels for different output streams, 2455 * based on resolution. Streams at maximum recording resolution (see {@link android.hardware.camera2.CameraDevice#createCaptureSession }) 2456 * or below have noise reduction applied, while higher-resolution streams have MINIMAL (if 2457 * supported) or no noise reduction applied (if MINIMAL is not supported.) The degree of 2458 * noise reduction for low-resolution streams is tuned so that frame rate is not impacted, 2459 * and the quality is equal to or better than FAST (since it is only applied to 2460 * lower-resolution outputs, quality may improve from FAST).</p> 2461 * <p>This mode is intended to be used by applications operating in a zero-shutter-lag mode 2462 * with YUV or PRIVATE reprocessing, where the application continuously captures 2463 * high-resolution intermediate buffers into a circular buffer, from which a final image is 2464 * produced via reprocessing when a user takes a picture. For such a use case, the 2465 * high-resolution buffers must not have noise reduction applied to maximize efficiency of 2466 * preview and to avoid over-applying noise filtering when reprocessing, while 2467 * low-resolution buffers (used for recording or preview, generally) need noise reduction 2468 * applied for reasonable preview quality.</p> 2469 * <p>This mode is guaranteed to be supported by devices that support either the 2470 * YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities 2471 * ({@link CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES android.request.availableCapabilities} lists either of those capabilities) and it will 2472 * be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.</p> 2473 * 2474 * @see CameraCharacteristics#REQUEST_AVAILABLE_CAPABILITIES 2475 * @see CaptureRequest#NOISE_REDUCTION_MODE 2476 */ 2477 public static final int NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG = 4; 2478 2479 // 2480 // Enumeration values for CaptureRequest#SENSOR_TEST_PATTERN_MODE 2481 // 2482 2483 /** 2484 * <p>No test pattern mode is used, and the camera 2485 * device returns captures from the image sensor.</p> 2486 * <p>This is the default if the key is not set.</p> 2487 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 2488 */ 2489 public static final int SENSOR_TEST_PATTERN_MODE_OFF = 0; 2490 2491 /** 2492 * <p>Each pixel in <code>[R, G_even, G_odd, B]</code> is replaced by its 2493 * respective color channel provided in 2494 * {@link CaptureRequest#SENSOR_TEST_PATTERN_DATA android.sensor.testPatternData}.</p> 2495 * <p>For example:</p> 2496 * <pre><code>android.testPatternData = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0] 2497 * </code></pre> 2498 * <p>All green pixels are 100% green. All red/blue pixels are black.</p> 2499 * <pre><code>android.testPatternData = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0] 2500 * </code></pre> 2501 * <p>All red pixels are 100% red. Only the odd green pixels 2502 * are 100% green. All blue pixels are 100% black.</p> 2503 * 2504 * @see CaptureRequest#SENSOR_TEST_PATTERN_DATA 2505 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 2506 */ 2507 public static final int SENSOR_TEST_PATTERN_MODE_SOLID_COLOR = 1; 2508 2509 /** 2510 * <p>All pixel data is replaced with an 8-bar color pattern.</p> 2511 * <p>The vertical bars (left-to-right) are as follows:</p> 2512 * <ul> 2513 * <li>100% white</li> 2514 * <li>yellow</li> 2515 * <li>cyan</li> 2516 * <li>green</li> 2517 * <li>magenta</li> 2518 * <li>red</li> 2519 * <li>blue</li> 2520 * <li>black</li> 2521 * </ul> 2522 * <p>In general the image would look like the following:</p> 2523 * <pre><code>W Y C G M R B K 2524 * W Y C G M R B K 2525 * W Y C G M R B K 2526 * W Y C G M R B K 2527 * W Y C G M R B K 2528 * . . . . . . . . 2529 * . . . . . . . . 2530 * . . . . . . . . 2531 * 2532 * (B = Blue, K = Black) 2533 * </code></pre> 2534 * <p>Each bar should take up 1/8 of the sensor pixel array width. 2535 * When this is not possible, the bar size should be rounded 2536 * down to the nearest integer and the pattern can repeat 2537 * on the right side.</p> 2538 * <p>Each bar's height must always take up the full sensor 2539 * pixel array height.</p> 2540 * <p>Each pixel in this test pattern must be set to either 2541 * 0% intensity or 100% intensity.</p> 2542 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 2543 */ 2544 public static final int SENSOR_TEST_PATTERN_MODE_COLOR_BARS = 2; 2545 2546 /** 2547 * <p>The test pattern is similar to COLOR_BARS, except that 2548 * each bar should start at its specified color at the top, 2549 * and fade to gray at the bottom.</p> 2550 * <p>Furthermore each bar is further subdivided into a left and 2551 * right half. The left half should have a smooth gradient, 2552 * and the right half should have a quantized gradient.</p> 2553 * <p>In particular, the right half's should consist of blocks of the 2554 * same color for 1/16th active sensor pixel array width.</p> 2555 * <p>The least significant bits in the quantized gradient should 2556 * be copied from the most significant bits of the smooth gradient.</p> 2557 * <p>The height of each bar should always be a multiple of 128. 2558 * When this is not the case, the pattern should repeat at the bottom 2559 * of the image.</p> 2560 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 2561 */ 2562 public static final int SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY = 3; 2563 2564 /** 2565 * <p>All pixel data is replaced by a pseudo-random sequence 2566 * generated from a PN9 512-bit sequence (typically implemented 2567 * in hardware with a linear feedback shift register).</p> 2568 * <p>The generator should be reset at the beginning of each frame, 2569 * and thus each subsequent raw frame with this test pattern should 2570 * be exactly the same as the last.</p> 2571 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 2572 */ 2573 public static final int SENSOR_TEST_PATTERN_MODE_PN9 = 4; 2574 2575 /** 2576 * <p>The first custom test pattern. All custom patterns that are 2577 * available only on this camera device are at least this numeric 2578 * value.</p> 2579 * <p>All of the custom test patterns will be static 2580 * (that is the raw image must not vary from frame to frame).</p> 2581 * @see CaptureRequest#SENSOR_TEST_PATTERN_MODE 2582 */ 2583 public static final int SENSOR_TEST_PATTERN_MODE_CUSTOM1 = 256; 2584 2585 // 2586 // Enumeration values for CaptureRequest#SHADING_MODE 2587 // 2588 2589 /** 2590 * <p>No lens shading correction is applied.</p> 2591 * @see CaptureRequest#SHADING_MODE 2592 */ 2593 public static final int SHADING_MODE_OFF = 0; 2594 2595 /** 2596 * <p>Apply lens shading corrections, without slowing 2597 * frame rate relative to sensor raw output</p> 2598 * @see CaptureRequest#SHADING_MODE 2599 */ 2600 public static final int SHADING_MODE_FAST = 1; 2601 2602 /** 2603 * <p>Apply high-quality lens shading correction, at the 2604 * cost of possibly reduced frame rate.</p> 2605 * @see CaptureRequest#SHADING_MODE 2606 */ 2607 public static final int SHADING_MODE_HIGH_QUALITY = 2; 2608 2609 // 2610 // Enumeration values for CaptureRequest#STATISTICS_FACE_DETECT_MODE 2611 // 2612 2613 /** 2614 * <p>Do not include face detection statistics in capture 2615 * results.</p> 2616 * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE 2617 */ 2618 public static final int STATISTICS_FACE_DETECT_MODE_OFF = 0; 2619 2620 /** 2621 * <p>Return face rectangle and confidence values only.</p> 2622 * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE 2623 */ 2624 public static final int STATISTICS_FACE_DETECT_MODE_SIMPLE = 1; 2625 2626 /** 2627 * <p>Return all face 2628 * metadata.</p> 2629 * <p>In this mode, face rectangles, scores, landmarks, and face IDs are all valid.</p> 2630 * @see CaptureRequest#STATISTICS_FACE_DETECT_MODE 2631 */ 2632 public static final int STATISTICS_FACE_DETECT_MODE_FULL = 2; 2633 2634 // 2635 // Enumeration values for CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE 2636 // 2637 2638 /** 2639 * <p>Do not include a lens shading map in the capture result.</p> 2640 * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE 2641 */ 2642 public static final int STATISTICS_LENS_SHADING_MAP_MODE_OFF = 0; 2643 2644 /** 2645 * <p>Include a lens shading map in the capture result.</p> 2646 * @see CaptureRequest#STATISTICS_LENS_SHADING_MAP_MODE 2647 */ 2648 public static final int STATISTICS_LENS_SHADING_MAP_MODE_ON = 1; 2649 2650 // 2651 // Enumeration values for CaptureRequest#STATISTICS_OIS_DATA_MODE 2652 // 2653 2654 /** 2655 * <p>Do not include OIS data in the capture result.</p> 2656 * @see CaptureRequest#STATISTICS_OIS_DATA_MODE 2657 */ 2658 public static final int STATISTICS_OIS_DATA_MODE_OFF = 0; 2659 2660 /** 2661 * <p>Include OIS data in the capture result.</p> 2662 * <p>{@link CaptureResult#STATISTICS_OIS_SAMPLES android.statistics.oisSamples} provides OIS sample data in the 2663 * output result metadata.</p> 2664 * 2665 * @see CaptureResult#STATISTICS_OIS_SAMPLES 2666 * @see CaptureRequest#STATISTICS_OIS_DATA_MODE 2667 */ 2668 public static final int STATISTICS_OIS_DATA_MODE_ON = 1; 2669 2670 // 2671 // Enumeration values for CaptureRequest#TONEMAP_MODE 2672 // 2673 2674 /** 2675 * <p>Use the tone mapping curve specified in 2676 * the {@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}* entries.</p> 2677 * <p>All color enhancement and tonemapping must be disabled, except 2678 * for applying the tonemapping curve specified by 2679 * {@link CaptureRequest#TONEMAP_CURVE android.tonemap.curve}.</p> 2680 * <p>Must not slow down frame rate relative to raw 2681 * sensor output.</p> 2682 * 2683 * @see CaptureRequest#TONEMAP_CURVE 2684 * @see CaptureRequest#TONEMAP_MODE 2685 */ 2686 public static final int TONEMAP_MODE_CONTRAST_CURVE = 0; 2687 2688 /** 2689 * <p>Advanced gamma mapping and color enhancement may be applied, without 2690 * reducing frame rate compared to raw sensor output.</p> 2691 * @see CaptureRequest#TONEMAP_MODE 2692 */ 2693 public static final int TONEMAP_MODE_FAST = 1; 2694 2695 /** 2696 * <p>High-quality gamma mapping and color enhancement will be applied, at 2697 * the cost of possibly reduced frame rate compared to raw sensor output.</p> 2698 * @see CaptureRequest#TONEMAP_MODE 2699 */ 2700 public static final int TONEMAP_MODE_HIGH_QUALITY = 2; 2701 2702 /** 2703 * <p>Use the gamma value specified in {@link CaptureRequest#TONEMAP_GAMMA android.tonemap.gamma} to peform 2704 * tonemapping.</p> 2705 * <p>All color enhancement and tonemapping must be disabled, except 2706 * for applying the tonemapping curve specified by {@link CaptureRequest#TONEMAP_GAMMA android.tonemap.gamma}.</p> 2707 * <p>Must not slow down frame rate relative to raw sensor output.</p> 2708 * 2709 * @see CaptureRequest#TONEMAP_GAMMA 2710 * @see CaptureRequest#TONEMAP_MODE 2711 */ 2712 public static final int TONEMAP_MODE_GAMMA_VALUE = 3; 2713 2714 /** 2715 * <p>Use the preset tonemapping curve specified in 2716 * {@link CaptureRequest#TONEMAP_PRESET_CURVE android.tonemap.presetCurve} to peform tonemapping.</p> 2717 * <p>All color enhancement and tonemapping must be disabled, except 2718 * for applying the tonemapping curve specified by 2719 * {@link CaptureRequest#TONEMAP_PRESET_CURVE android.tonemap.presetCurve}.</p> 2720 * <p>Must not slow down frame rate relative to raw sensor output.</p> 2721 * 2722 * @see CaptureRequest#TONEMAP_PRESET_CURVE 2723 * @see CaptureRequest#TONEMAP_MODE 2724 */ 2725 public static final int TONEMAP_MODE_PRESET_CURVE = 4; 2726 2727 // 2728 // Enumeration values for CaptureRequest#TONEMAP_PRESET_CURVE 2729 // 2730 2731 /** 2732 * <p>Tonemapping curve is defined by sRGB</p> 2733 * @see CaptureRequest#TONEMAP_PRESET_CURVE 2734 */ 2735 public static final int TONEMAP_PRESET_CURVE_SRGB = 0; 2736 2737 /** 2738 * <p>Tonemapping curve is defined by ITU-R BT.709</p> 2739 * @see CaptureRequest#TONEMAP_PRESET_CURVE 2740 */ 2741 public static final int TONEMAP_PRESET_CURVE_REC709 = 1; 2742 2743 // 2744 // Enumeration values for CaptureRequest#DISTORTION_CORRECTION_MODE 2745 // 2746 2747 /** 2748 * <p>No distortion correction is applied.</p> 2749 * @see CaptureRequest#DISTORTION_CORRECTION_MODE 2750 */ 2751 public static final int DISTORTION_CORRECTION_MODE_OFF = 0; 2752 2753 /** 2754 * <p>Lens distortion correction is applied without reducing frame rate 2755 * relative to sensor output. It may be the same as OFF if distortion correction would 2756 * reduce frame rate relative to sensor.</p> 2757 * @see CaptureRequest#DISTORTION_CORRECTION_MODE 2758 */ 2759 public static final int DISTORTION_CORRECTION_MODE_FAST = 1; 2760 2761 /** 2762 * <p>High-quality distortion correction is applied, at the cost of 2763 * possibly reduced frame rate relative to sensor output.</p> 2764 * @see CaptureRequest#DISTORTION_CORRECTION_MODE 2765 */ 2766 public static final int DISTORTION_CORRECTION_MODE_HIGH_QUALITY = 2; 2767 2768 // 2769 // Enumeration values for CaptureResult#CONTROL_AE_STATE 2770 // 2771 2772 /** 2773 * <p>AE is off or recently reset.</p> 2774 * <p>When a camera device is opened, it starts in 2775 * this state. This is a transient state, the camera device may skip reporting 2776 * this state in capture result.</p> 2777 * @see CaptureResult#CONTROL_AE_STATE 2778 */ 2779 public static final int CONTROL_AE_STATE_INACTIVE = 0; 2780 2781 /** 2782 * <p>AE doesn't yet have a good set of control values 2783 * for the current scene.</p> 2784 * <p>This is a transient state, the camera device may skip 2785 * reporting this state in capture result.</p> 2786 * @see CaptureResult#CONTROL_AE_STATE 2787 */ 2788 public static final int CONTROL_AE_STATE_SEARCHING = 1; 2789 2790 /** 2791 * <p>AE has a good set of control values for the 2792 * current scene.</p> 2793 * @see CaptureResult#CONTROL_AE_STATE 2794 */ 2795 public static final int CONTROL_AE_STATE_CONVERGED = 2; 2796 2797 /** 2798 * <p>AE has been locked.</p> 2799 * @see CaptureResult#CONTROL_AE_STATE 2800 */ 2801 public static final int CONTROL_AE_STATE_LOCKED = 3; 2802 2803 /** 2804 * <p>AE has a good set of control values, but flash 2805 * needs to be fired for good quality still 2806 * capture.</p> 2807 * @see CaptureResult#CONTROL_AE_STATE 2808 */ 2809 public static final int CONTROL_AE_STATE_FLASH_REQUIRED = 4; 2810 2811 /** 2812 * <p>AE has been asked to do a precapture sequence 2813 * and is currently executing it.</p> 2814 * <p>Precapture can be triggered through setting 2815 * {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} to START. Currently 2816 * active and completed (if it causes camera device internal AE lock) precapture 2817 * metering sequence can be canceled through setting 2818 * {@link CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER android.control.aePrecaptureTrigger} to CANCEL.</p> 2819 * <p>Once PRECAPTURE completes, AE will transition to CONVERGED 2820 * or FLASH_REQUIRED as appropriate. This is a transient 2821 * state, the camera device may skip reporting this state in 2822 * capture result.</p> 2823 * 2824 * @see CaptureRequest#CONTROL_AE_PRECAPTURE_TRIGGER 2825 * @see CaptureResult#CONTROL_AE_STATE 2826 */ 2827 public static final int CONTROL_AE_STATE_PRECAPTURE = 5; 2828 2829 // 2830 // Enumeration values for CaptureResult#CONTROL_AF_STATE 2831 // 2832 2833 /** 2834 * <p>AF is off or has not yet tried to scan/been asked 2835 * to scan.</p> 2836 * <p>When a camera device is opened, it starts in this 2837 * state. This is a transient state, the camera device may 2838 * skip reporting this state in capture 2839 * result.</p> 2840 * @see CaptureResult#CONTROL_AF_STATE 2841 */ 2842 public static final int CONTROL_AF_STATE_INACTIVE = 0; 2843 2844 /** 2845 * <p>AF is currently performing an AF scan initiated the 2846 * camera device in a continuous autofocus mode.</p> 2847 * <p>Only used by CONTINUOUS_* AF modes. This is a transient 2848 * state, the camera device may skip reporting this state in 2849 * capture result.</p> 2850 * @see CaptureResult#CONTROL_AF_STATE 2851 */ 2852 public static final int CONTROL_AF_STATE_PASSIVE_SCAN = 1; 2853 2854 /** 2855 * <p>AF currently believes it is in focus, but may 2856 * restart scanning at any time.</p> 2857 * <p>Only used by CONTINUOUS_* AF modes. This is a transient 2858 * state, the camera device may skip reporting this state in 2859 * capture result.</p> 2860 * @see CaptureResult#CONTROL_AF_STATE 2861 */ 2862 public static final int CONTROL_AF_STATE_PASSIVE_FOCUSED = 2; 2863 2864 /** 2865 * <p>AF is performing an AF scan because it was 2866 * triggered by AF trigger.</p> 2867 * <p>Only used by AUTO or MACRO AF modes. This is a transient 2868 * state, the camera device may skip reporting this state in 2869 * capture result.</p> 2870 * @see CaptureResult#CONTROL_AF_STATE 2871 */ 2872 public static final int CONTROL_AF_STATE_ACTIVE_SCAN = 3; 2873 2874 /** 2875 * <p>AF believes it is focused correctly and has locked 2876 * focus.</p> 2877 * <p>This state is reached only after an explicit START AF trigger has been 2878 * sent ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}), when good focus has been obtained.</p> 2879 * <p>The lens will remain stationary until the AF mode ({@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}) is changed or 2880 * a new AF trigger is sent to the camera device ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}).</p> 2881 * 2882 * @see CaptureRequest#CONTROL_AF_MODE 2883 * @see CaptureRequest#CONTROL_AF_TRIGGER 2884 * @see CaptureResult#CONTROL_AF_STATE 2885 */ 2886 public static final int CONTROL_AF_STATE_FOCUSED_LOCKED = 4; 2887 2888 /** 2889 * <p>AF has failed to focus successfully and has locked 2890 * focus.</p> 2891 * <p>This state is reached only after an explicit START AF trigger has been 2892 * sent ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}), when good focus cannot be obtained.</p> 2893 * <p>The lens will remain stationary until the AF mode ({@link CaptureRequest#CONTROL_AF_MODE android.control.afMode}) is changed or 2894 * a new AF trigger is sent to the camera device ({@link CaptureRequest#CONTROL_AF_TRIGGER android.control.afTrigger}).</p> 2895 * 2896 * @see CaptureRequest#CONTROL_AF_MODE 2897 * @see CaptureRequest#CONTROL_AF_TRIGGER 2898 * @see CaptureResult#CONTROL_AF_STATE 2899 */ 2900 public static final int CONTROL_AF_STATE_NOT_FOCUSED_LOCKED = 5; 2901 2902 /** 2903 * <p>AF finished a passive scan without finding focus, 2904 * and may restart scanning at any time.</p> 2905 * <p>Only used by CONTINUOUS_* AF modes. This is a transient state, the camera 2906 * device may skip reporting this state in capture result.</p> 2907 * <p>LEGACY camera devices do not support this state. When a passive 2908 * scan has finished, it will always go to PASSIVE_FOCUSED.</p> 2909 * @see CaptureResult#CONTROL_AF_STATE 2910 */ 2911 public static final int CONTROL_AF_STATE_PASSIVE_UNFOCUSED = 6; 2912 2913 // 2914 // Enumeration values for CaptureResult#CONTROL_AWB_STATE 2915 // 2916 2917 /** 2918 * <p>AWB is not in auto mode, or has not yet started metering.</p> 2919 * <p>When a camera device is opened, it starts in this 2920 * state. This is a transient state, the camera device may 2921 * skip reporting this state in capture 2922 * result.</p> 2923 * @see CaptureResult#CONTROL_AWB_STATE 2924 */ 2925 public static final int CONTROL_AWB_STATE_INACTIVE = 0; 2926 2927 /** 2928 * <p>AWB doesn't yet have a good set of control 2929 * values for the current scene.</p> 2930 * <p>This is a transient state, the camera device 2931 * may skip reporting this state in capture result.</p> 2932 * @see CaptureResult#CONTROL_AWB_STATE 2933 */ 2934 public static final int CONTROL_AWB_STATE_SEARCHING = 1; 2935 2936 /** 2937 * <p>AWB has a good set of control values for the 2938 * current scene.</p> 2939 * @see CaptureResult#CONTROL_AWB_STATE 2940 */ 2941 public static final int CONTROL_AWB_STATE_CONVERGED = 2; 2942 2943 /** 2944 * <p>AWB has been locked.</p> 2945 * @see CaptureResult#CONTROL_AWB_STATE 2946 */ 2947 public static final int CONTROL_AWB_STATE_LOCKED = 3; 2948 2949 // 2950 // Enumeration values for CaptureResult#CONTROL_AF_SCENE_CHANGE 2951 // 2952 2953 /** 2954 * <p>Scene change is not detected within the AF region(s).</p> 2955 * @see CaptureResult#CONTROL_AF_SCENE_CHANGE 2956 */ 2957 public static final int CONTROL_AF_SCENE_CHANGE_NOT_DETECTED = 0; 2958 2959 /** 2960 * <p>Scene change is detected within the AF region(s).</p> 2961 * @see CaptureResult#CONTROL_AF_SCENE_CHANGE 2962 */ 2963 public static final int CONTROL_AF_SCENE_CHANGE_DETECTED = 1; 2964 2965 // 2966 // Enumeration values for CaptureResult#FLASH_STATE 2967 // 2968 2969 /** 2970 * <p>No flash on camera.</p> 2971 * @see CaptureResult#FLASH_STATE 2972 */ 2973 public static final int FLASH_STATE_UNAVAILABLE = 0; 2974 2975 /** 2976 * <p>Flash is charging and cannot be fired.</p> 2977 * @see CaptureResult#FLASH_STATE 2978 */ 2979 public static final int FLASH_STATE_CHARGING = 1; 2980 2981 /** 2982 * <p>Flash is ready to fire.</p> 2983 * @see CaptureResult#FLASH_STATE 2984 */ 2985 public static final int FLASH_STATE_READY = 2; 2986 2987 /** 2988 * <p>Flash fired for this capture.</p> 2989 * @see CaptureResult#FLASH_STATE 2990 */ 2991 public static final int FLASH_STATE_FIRED = 3; 2992 2993 /** 2994 * <p>Flash partially illuminated this frame.</p> 2995 * <p>This is usually due to the next or previous frame having 2996 * the flash fire, and the flash spilling into this capture 2997 * due to hardware limitations.</p> 2998 * @see CaptureResult#FLASH_STATE 2999 */ 3000 public static final int FLASH_STATE_PARTIAL = 4; 3001 3002 // 3003 // Enumeration values for CaptureResult#LENS_STATE 3004 // 3005 3006 /** 3007 * <p>The lens parameters ({@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}, {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}, 3008 * {@link CaptureRequest#LENS_FILTER_DENSITY android.lens.filterDensity} and {@link CaptureRequest#LENS_APERTURE android.lens.aperture}) are not changing.</p> 3009 * 3010 * @see CaptureRequest#LENS_APERTURE 3011 * @see CaptureRequest#LENS_FILTER_DENSITY 3012 * @see CaptureRequest#LENS_FOCAL_LENGTH 3013 * @see CaptureRequest#LENS_FOCUS_DISTANCE 3014 * @see CaptureResult#LENS_STATE 3015 */ 3016 public static final int LENS_STATE_STATIONARY = 0; 3017 3018 /** 3019 * <p>One or several of the lens parameters 3020 * ({@link CaptureRequest#LENS_FOCAL_LENGTH android.lens.focalLength}, {@link CaptureRequest#LENS_FOCUS_DISTANCE android.lens.focusDistance}, 3021 * {@link CaptureRequest#LENS_FILTER_DENSITY android.lens.filterDensity} or {@link CaptureRequest#LENS_APERTURE android.lens.aperture}) is 3022 * currently changing.</p> 3023 * 3024 * @see CaptureRequest#LENS_APERTURE 3025 * @see CaptureRequest#LENS_FILTER_DENSITY 3026 * @see CaptureRequest#LENS_FOCAL_LENGTH 3027 * @see CaptureRequest#LENS_FOCUS_DISTANCE 3028 * @see CaptureResult#LENS_STATE 3029 */ 3030 public static final int LENS_STATE_MOVING = 1; 3031 3032 // 3033 // Enumeration values for CaptureResult#STATISTICS_SCENE_FLICKER 3034 // 3035 3036 /** 3037 * <p>The camera device does not detect any flickering illumination 3038 * in the current scene.</p> 3039 * @see CaptureResult#STATISTICS_SCENE_FLICKER 3040 */ 3041 public static final int STATISTICS_SCENE_FLICKER_NONE = 0; 3042 3043 /** 3044 * <p>The camera device detects illumination flickering at 50Hz 3045 * in the current scene.</p> 3046 * @see CaptureResult#STATISTICS_SCENE_FLICKER 3047 */ 3048 public static final int STATISTICS_SCENE_FLICKER_50HZ = 1; 3049 3050 /** 3051 * <p>The camera device detects illumination flickering at 60Hz 3052 * in the current scene.</p> 3053 * @see CaptureResult#STATISTICS_SCENE_FLICKER 3054 */ 3055 public static final int STATISTICS_SCENE_FLICKER_60HZ = 2; 3056 3057 // 3058 // Enumeration values for CaptureResult#SYNC_FRAME_NUMBER 3059 // 3060 3061 /** 3062 * <p>The current result is not yet fully synchronized to any request.</p> 3063 * <p>Synchronization is in progress, and reading metadata from this 3064 * result may include a mix of data that have taken effect since the 3065 * last synchronization time.</p> 3066 * <p>In some future result, within {@link CameraCharacteristics#SYNC_MAX_LATENCY android.sync.maxLatency} frames, 3067 * this value will update to the actual frame number frame number 3068 * the result is guaranteed to be synchronized to (as long as the 3069 * request settings remain constant).</p> 3070 * 3071 * @see CameraCharacteristics#SYNC_MAX_LATENCY 3072 * @see CaptureResult#SYNC_FRAME_NUMBER 3073 * @hide 3074 */ 3075 public static final int SYNC_FRAME_NUMBER_CONVERGING = -1; 3076 3077 /** 3078 * <p>The current result's synchronization status is unknown.</p> 3079 * <p>The result may have already converged, or it may be in 3080 * progress. Reading from this result may include some mix 3081 * of settings from past requests.</p> 3082 * <p>After a settings change, the new settings will eventually all 3083 * take effect for the output buffers and results. However, this 3084 * value will not change when that happens. Altering settings 3085 * rapidly may provide outcomes using mixes of settings from recent 3086 * requests.</p> 3087 * <p>This value is intended primarily for backwards compatibility with 3088 * the older camera implementations (for android.hardware.Camera).</p> 3089 * @see CaptureResult#SYNC_FRAME_NUMBER 3090 * @hide 3091 */ 3092 public static final int SYNC_FRAME_NUMBER_UNKNOWN = -2; 3093 3094 /*~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~ 3095 * End generated code 3096 *~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~@~O@*/ 3097 3098} 3099