xref: /system/bt/stack/btm/btm_ble.cc

/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This file contains functions for BLE device control utilities, and LE
 *  security functions.
 *
 ******************************************************************************/

#define LOG_TAG "bt_btm_ble"

#include "bt_target.h"

#include <string.h>

#include "bt_types.h"
#include "bt_utils.h"
#include "btm_ble_api.h"
#include "btm_int.h"
#include "btu.h"
#include "device/include/controller.h"
#include "gap_api.h"
#include "gatt_api.h"
#include "hcimsgs.h"
#include "l2c_int.h"
#include "osi/include/log.h"
#include "osi/include/osi.h"
#include "smp_api.h"

extern bool    aes_cipher_msg_auth_code(BT_OCTET16 key, uint8_t *input, uint16_t length,
                                                 uint16_t tlen, uint8_t *p_signature);

/******************************************************************************/
/* External Function to be called by other modules                             */
/******************************************************************************/
/********************************************************
 *
 * Function         BTM_SecAddBleDevice
 *
 * Description      Add/modify device.  This function will be normally called
 *                  during host startup to restore all required information
 *                  for a LE device stored in the NVRAM.
 *
 * Parameters:      bd_addr          - BD address of the peer
 *                  bd_name          - Name of the peer device.  NULL if unknown.
 *                  dev_type         - Remote device's device type.
 *                  addr_type        - LE device address type.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool    BTM_SecAddBleDevice (const BD_ADDR bd_addr, BD_NAME bd_name, tBT_DEVICE_TYPE dev_type,
                             tBLE_ADDR_TYPE addr_type)
{
    BTM_TRACE_DEBUG ("%s: dev_type=0x%x", __func__, dev_type);

    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev(bd_addr);
    if (!p_dev_rec)
    {
        p_dev_rec = btm_sec_allocate_dev_rec();

        memcpy(p_dev_rec->bd_addr, bd_addr, BD_ADDR_LEN);
        p_dev_rec->hci_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_BR_EDR);
        p_dev_rec->ble_hci_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

        /* update conn params, use default value for background connection params */
        p_dev_rec->conn_params.min_conn_int     = BTM_BLE_CONN_PARAM_UNDEF;
        p_dev_rec->conn_params.max_conn_int     = BTM_BLE_CONN_PARAM_UNDEF;
        p_dev_rec->conn_params.supervision_tout = BTM_BLE_CONN_PARAM_UNDEF;
        p_dev_rec->conn_params.slave_latency    = BTM_BLE_CONN_PARAM_UNDEF;

        BTM_TRACE_DEBUG("%s: Device added, handle=0x%x ", __func__, p_dev_rec->ble_hci_handle);
    }

    memset(p_dev_rec->sec_bd_name, 0, sizeof(tBTM_BD_NAME));

    if (bd_name && bd_name[0])
    {
        p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
        strlcpy((char *)p_dev_rec->sec_bd_name,
                (char *)bd_name, BTM_MAX_REM_BD_NAME_LEN);
    }
    p_dev_rec->device_type |= dev_type;
    p_dev_rec->ble.ble_addr_type = addr_type;

    memcpy(p_dev_rec->ble.pseudo_addr, bd_addr, BD_ADDR_LEN);
    /* sync up with the Inq Data base*/
    tBTM_INQ_INFO      *p_info = BTM_InqDbRead(bd_addr);
    if (p_info)
    {
        p_info->results.ble_addr_type = p_dev_rec->ble.ble_addr_type ;
        p_info->results.device_type = p_dev_rec->device_type;
        BTM_TRACE_DEBUG("InqDb  device_type =0x%x  addr_type=0x%x",
                         p_info->results.device_type, p_info->results.ble_addr_type);
    }

    return true;
}

/*******************************************************************************
 *
 * Function         BTM_SecAddBleKey
 *
 * Description      Add/modify LE device information.  This function will be
 *                  normally called during host startup to restore all required
 *                  information stored in the NVRAM.
 *
 * Parameters:      bd_addr          - BD address of the peer
 *                  p_le_key         - LE key values.
 *                  key_type         - LE SMP key type.
*
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool    BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, tBTM_LE_KEY_TYPE key_type)
{
    tBTM_SEC_DEV_REC  *p_dev_rec;
    BTM_TRACE_DEBUG ("BTM_SecAddBleKey");
    p_dev_rec = btm_find_dev (bd_addr);
    if (!p_dev_rec || !p_le_key ||
        (key_type != BTM_LE_KEY_PENC && key_type != BTM_LE_KEY_PID &&
         key_type != BTM_LE_KEY_PCSRK && key_type != BTM_LE_KEY_LENC &&
         key_type != BTM_LE_KEY_LCSRK && key_type != BTM_LE_KEY_LID))
    {
        BTM_TRACE_WARNING ("BTM_SecAddBleKey()  Wrong Type, or No Device record \
                        for bdaddr: %08x%04x, Type: %d",
                            (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
                            (bd_addr[4]<<8)+bd_addr[5], key_type);
        return(false);
    }

    BTM_TRACE_DEBUG ("BTM_SecAddLeKey()  BDA: %08x%04x, Type: 0x%02x",
                      (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
                      (bd_addr[4]<<8)+bd_addr[5], key_type);

    btm_sec_save_le_key (bd_addr, key_type, p_le_key, false);

#if (BLE_PRIVACY_SPT == TRUE)
    if (key_type == BTM_LE_KEY_PID || key_type == BTM_LE_KEY_LID)
        btm_ble_resolving_list_load_dev (p_dev_rec);
#endif

    return(true);
}

/*******************************************************************************
 *
 * Function         BTM_BleLoadLocalKeys
 *
 * Description      Local local identity key, encryption root or sign counter.
 *
 * Parameters:      key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER
 *                            or BTM_BLE_KEY_TYPE_COUNTER.
 *                  p_key: pointer to the key.
*
 * Returns          non2.
 *
 ******************************************************************************/
void BTM_BleLoadLocalKeys(uint8_t key_type, tBTM_BLE_LOCAL_KEYS *p_key)
{
    tBTM_DEVCB *p_devcb = &btm_cb.devcb;
    BTM_TRACE_DEBUG ("%s", __func__);
    if (p_key != NULL)
    {
        switch (key_type)
        {
            case BTM_BLE_KEY_TYPE_ID:
                memcpy(&p_devcb->id_keys, &p_key->id_keys, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
                break;

            case BTM_BLE_KEY_TYPE_ER:
                memcpy(p_devcb->ble_encryption_key_value, p_key->er, sizeof(BT_OCTET16));
                break;

            default:
                BTM_TRACE_ERROR("unknow local key type: %d", key_type);
                break;
        }
    }
}

/*******************************************************************************
 *
 * Function         BTM_GetDeviceEncRoot
 *
 * Description      This function is called to read the local device encryption
 *                  root.
 *
 * Returns          void
 *                  the local device ER is copied into ble_encr_key_value
 *
 ******************************************************************************/
void BTM_GetDeviceEncRoot (BT_OCTET16 ble_encr_key_value)
{
    BTM_TRACE_DEBUG ("%s", __func__);
    memcpy (ble_encr_key_value, btm_cb.devcb.ble_encryption_key_value, BT_OCTET16_LEN);
}

/*******************************************************************************
 *
 * Function         BTM_GetDeviceIDRoot
 *
 * Description      This function is called to read the local device identity
 *                  root.
 *
 * Returns          void
 *                  the local device IR is copied into irk
 *
 ******************************************************************************/
void BTM_GetDeviceIDRoot (BT_OCTET16 irk)
{
    BTM_TRACE_DEBUG ("BTM_GetDeviceIDRoot ");

    memcpy (irk, btm_cb.devcb.id_keys.irk, BT_OCTET16_LEN);
}

/*******************************************************************************
 *
 * Function         BTM_GetDeviceDHK
 *
 * Description      This function is called to read the local device DHK.
 *
 * Returns          void
 *                  the local device DHK is copied into dhk
 *
 ******************************************************************************/
void BTM_GetDeviceDHK (BT_OCTET16 dhk)
{
    BTM_TRACE_DEBUG ("BTM_GetDeviceDHK");
    memcpy (dhk, btm_cb.devcb.id_keys.dhk, BT_OCTET16_LEN);
}

/*******************************************************************************
 *
 * Function         BTM_ReadConnectionAddr
 *
 * Description      This function is called to get the local device address information
 *                  .
 *
 * Returns          void
 *
 ******************************************************************************/
void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr, tBLE_ADDR_TYPE *p_addr_type)
{
    tACL_CONN       *p_acl = btm_bda_to_acl(remote_bda, BT_TRANSPORT_LE);

    if (p_acl == NULL)
    {
        BTM_TRACE_ERROR("No connection exist!");
        return;
    }
    memcpy(local_conn_addr, p_acl->conn_addr, BD_ADDR_LEN);
    * p_addr_type = p_acl->conn_addr_type;

    BTM_TRACE_DEBUG ("BTM_ReadConnectionAddr address type: %d addr: 0x%02x",
                    p_acl->conn_addr_type, p_acl->conn_addr[0]);
}

/*******************************************************************************
 *
 * Function         BTM_IsBleConnection
 *
 * Description      This function is called to check if the connection handle
 *                  for an LE link
 *
 * Returns          true if connection is LE link, otherwise false.
 *
 ******************************************************************************/
bool    BTM_IsBleConnection (uint16_t conn_handle)
{
    uint8_t              xx;
    tACL_CONN            *p;

    BTM_TRACE_API ("BTM_IsBleConnection: conn_handle: %d", conn_handle);

    xx = btm_handle_to_acl_index (conn_handle);
    if (xx >= MAX_L2CAP_LINKS)
        return false;

    p = &btm_cb.acl_db[xx];

    return (p->transport == BT_TRANSPORT_LE);
}

/*******************************************************************************
 *
 * Function         BTM_ReadRemoteConnectionAddr
 *
 * Description      This function is read the remote device address currently used
 *
 * Parameters     pseudo_addr: pseudo random address available
 *                conn_addr:connection address used
 *                p_addr_type : BD Address type, Public or Random of the address used
 *
 * Returns          bool    , true if connection to remote device exists, else false
 *
 ******************************************************************************/
bool    BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, BD_ADDR conn_addr,
                                               tBLE_ADDR_TYPE *p_addr_type)
{
 bool            st = true;
#if (BLE_PRIVACY_SPT == TRUE)
    tACL_CONN       *p = btm_bda_to_acl (pseudo_addr, BT_TRANSPORT_LE);

    if (p == NULL)
    {
        BTM_TRACE_ERROR("BTM_ReadRemoteConnectionAddr can not find connection"
                        " with matching address");
        return false;
    }

    memcpy(conn_addr, p->active_remote_addr, BD_ADDR_LEN);
    *p_addr_type = p->active_remote_addr_type;
#else
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev(pseudo_addr);

    memcpy(conn_addr, pseudo_addr, BD_ADDR_LEN);
    if (p_dev_rec != NULL)
    {
        *p_addr_type = p_dev_rec->ble.ble_addr_type;
    }
#endif
    return st;

}
/*******************************************************************************
 *
 * Function         BTM_SecurityGrant
 *
 * Description      This function is called to grant security process.
 *
 * Parameters       bd_addr - peer device bd address.
 *                  res     - result of the operation BTM_SUCCESS if success.
 *                            Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts.
 *
 * Returns          None
 *
 ******************************************************************************/
void BTM_SecurityGrant(BD_ADDR bd_addr, uint8_t res)
{
    tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_REPEATED_ATTEMPTS;
    BTM_TRACE_DEBUG ("BTM_SecurityGrant");
    SMP_SecurityGrant(bd_addr, res_smp);
}

/*******************************************************************************
 *
 * Function         BTM_BlePasskeyReply
 *
 * Description      This function is called after Security Manager submitted
 *                  passkey request to the application.
 *
 * Parameters:      bd_addr      - Address of the device for which passkey was requested
 *                  res          - result of the operation BTM_SUCCESS if success
 *                  key_len      - length in bytes of the Passkey
 *                  p_passkey        - pointer to array with the passkey
 *                  trusted_mask - bitwise OR of trusted services (array of uint32_t)
 *
 ******************************************************************************/
void BTM_BlePasskeyReply (BD_ADDR bd_addr, uint8_t res, uint32_t passkey)
{
    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
    tSMP_STATUS      res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_PASSKEY_ENTRY_FAIL;

    if (p_dev_rec == NULL)
    {
        BTM_TRACE_ERROR("Passkey reply to Unknown device");
        return;
    }

    p_dev_rec->sec_flags   |= BTM_SEC_LE_AUTHENTICATED;
    BTM_TRACE_DEBUG ("BTM_BlePasskeyReply");
    SMP_PasskeyReply(bd_addr, res_smp, passkey);
}

/*******************************************************************************
 *
 * Function         BTM_BleConfirmReply
 *
 * Description      This function is called after Security Manager submitted
 *                  numeric comparison request to the application.
 *
 * Parameters:      bd_addr      - Address of the device with which numeric
 *                                 comparison was requested
 *                  res          - comparison result BTM_SUCCESS if success
 *
 ******************************************************************************/
void BTM_BleConfirmReply (BD_ADDR bd_addr, uint8_t res)
{
    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
    tSMP_STATUS      res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_PASSKEY_ENTRY_FAIL;

    if (p_dev_rec == NULL)
    {
        BTM_TRACE_ERROR("Passkey reply to Unknown device");
        return;
    }

    p_dev_rec->sec_flags   |= BTM_SEC_LE_AUTHENTICATED;
    BTM_TRACE_DEBUG ("%s", __func__);
    SMP_ConfirmReply(bd_addr, res_smp);
}

/*******************************************************************************
 *
 * Function         BTM_BleOobDataReply
 *
 * Description      This function is called to provide the OOB data for
 *                  SMP in response to BTM_LE_OOB_REQ_EVT
 *
 * Parameters:      bd_addr     - Address of the peer device
 *                  res         - result of the operation SMP_SUCCESS if success
 *                  p_data      - oob data, depending on transport and capabilities.
 *                                Might be "Simple Pairing Randomizer", or
 *                                "Security Manager TK Value".
 *
 ******************************************************************************/
void BTM_BleOobDataReply(BD_ADDR bd_addr, uint8_t res, uint8_t len, uint8_t *p_data)
{
    tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_OOB_FAIL;
    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);

    BTM_TRACE_DEBUG ("%s:", __func__);

    if (p_dev_rec == NULL) {
        BTM_TRACE_ERROR("%s: Unknown device", __func__);
        return;
    }

    p_dev_rec->sec_flags |= BTM_SEC_LE_AUTHENTICATED;
    SMP_OobDataReply(bd_addr, res_smp, len, p_data);
}

/*******************************************************************************
 *
 * Function         BTM_BleSecureConnectionOobDataReply
 *
 * Description      This function is called to provide the OOB data for
 *                  SMP in response to BTM_LE_OOB_REQ_EVT when secure connection
 *                  data is available
 *
 * Parameters:      bd_addr     - Address of the peer device
 *                  p_c         - pointer to Confirmation.
 *                  p_r         - pointer to Randomizer
 *
 ******************************************************************************/
void BTM_BleSecureConnectionOobDataReply(BD_ADDR bd_addr,
                                         uint8_t *p_c, uint8_t *p_r)
{
    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);

    BTM_TRACE_DEBUG ("%s:", __func__);

    if (p_dev_rec == NULL) {
        BTM_TRACE_ERROR("%s: Unknown device", __func__);
        return;
    }

    p_dev_rec->sec_flags |= BTM_SEC_LE_AUTHENTICATED;

    tSMP_SC_OOB_DATA oob;
    memset(&oob, 0, sizeof(tSMP_SC_OOB_DATA));

    oob.peer_oob_data.present = true;
    memcpy(&oob.peer_oob_data.randomizer, p_r, BT_OCTET16_LEN);
    memcpy(&oob.peer_oob_data.commitment, p_c, BT_OCTET16_LEN);
    oob.peer_oob_data.addr_rcvd_from.type = p_dev_rec->ble.ble_addr_type;
    memcpy(&oob.peer_oob_data.addr_rcvd_from.bda, bd_addr, sizeof(BD_ADDR));

    SMP_SecureConnectionOobDataReply((uint8_t*)&oob);
}

/******************************************************************************
 *
 * Function         BTM_BleSetConnScanParams
 *
 * Description      Set scan parameter used in BLE connection request
 *
 * Parameters:      scan_interval: scan interval
 *                  scan_window: scan window
 *
 * Returns          void
 *
 ******************************************************************************/
void BTM_BleSetConnScanParams (uint32_t scan_interval, uint32_t scan_window)
{
    tBTM_BLE_CB *p_ble_cb = &btm_cb.ble_ctr_cb;
    bool        new_param = false;

    if (BTM_BLE_ISVALID_PARAM(scan_interval, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) &&
        BTM_BLE_ISVALID_PARAM(scan_window, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX))
    {
        if (p_ble_cb->scan_int != scan_interval)
        {
            p_ble_cb->scan_int = scan_interval;
            new_param = true;
        }

        if (p_ble_cb->scan_win != scan_window)
        {
            p_ble_cb->scan_win = scan_window;
            new_param = true;
        }

        if (new_param && p_ble_cb->conn_state == BLE_BG_CONN)
        {
            btm_ble_suspend_bg_conn();
        }
    }
    else
    {
        BTM_TRACE_ERROR("Illegal Connection Scan Parameters");
    }
}

/********************************************************
 *
 * Function         BTM_BleSetPrefConnParams
 *
 * Description      Set a peripheral's preferred connection parameters
 *
 * Parameters:      bd_addr          - BD address of the peripheral
 *                  scan_interval: scan interval
 *                  scan_window: scan window
 *                  min_conn_int     - minimum preferred connection interval
 *                  max_conn_int     - maximum preferred connection interval
 *                  slave_latency    - preferred slave latency
 *                  supervision_tout - preferred supervision timeout
 *
 * Returns          void
 *
 ******************************************************************************/
void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
                               uint16_t min_conn_int, uint16_t max_conn_int,
                               uint16_t slave_latency, uint16_t supervision_tout)
{
    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);

    BTM_TRACE_API ("BTM_BleSetPrefConnParams min: %u  max: %u  latency: %u  \
                    tout: %u",
                    min_conn_int, max_conn_int, slave_latency, supervision_tout);

    if (BTM_BLE_ISVALID_PARAM(min_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
        BTM_BLE_ISVALID_PARAM(max_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
        BTM_BLE_ISVALID_PARAM(supervision_tout, BTM_BLE_CONN_SUP_TOUT_MIN, BTM_BLE_CONN_SUP_TOUT_MAX) &&
        (slave_latency <= BTM_BLE_CONN_LATENCY_MAX || slave_latency == BTM_BLE_CONN_PARAM_UNDEF))
    {
        if (p_dev_rec)
        {
            /* expect conn int and stout and slave latency to be updated all together */
            if (min_conn_int != BTM_BLE_CONN_PARAM_UNDEF || max_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
            {
                if (min_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
                    p_dev_rec->conn_params.min_conn_int = min_conn_int;
                else
                    p_dev_rec->conn_params.min_conn_int = max_conn_int;

                if (max_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
                    p_dev_rec->conn_params.max_conn_int = max_conn_int;
                else
                    p_dev_rec->conn_params.max_conn_int = min_conn_int;

                if (slave_latency != BTM_BLE_CONN_PARAM_UNDEF)
                    p_dev_rec->conn_params.slave_latency = slave_latency;
                else
                    p_dev_rec->conn_params.slave_latency = BTM_BLE_CONN_SLAVE_LATENCY_DEF;

                if (supervision_tout != BTM_BLE_CONN_PARAM_UNDEF)
                    p_dev_rec->conn_params.supervision_tout = supervision_tout;
                else
                    p_dev_rec->conn_params.supervision_tout = BTM_BLE_CONN_TIMEOUT_DEF;

            }

        }
        else
        {
            BTM_TRACE_ERROR("Unknown Device, setting rejected");
        }
    }
    else
    {
        BTM_TRACE_ERROR("Illegal Connection Parameters");
    }
}

/*******************************************************************************
 *
 * Function         BTM_ReadDevInfo
 *
 * Description      This function is called to read the device/address type
 *                  of BD address.
 *
 * Parameter        remote_bda: remote device address
 *                  p_dev_type: output parameter to read the device type.
 *                  p_addr_type: output parameter to read the address type.
 *
 ******************************************************************************/
void BTM_ReadDevInfo (const BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, tBLE_ADDR_TYPE *p_addr_type)
{
    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (remote_bda);
    tBTM_INQ_INFO     *p_inq_info = BTM_InqDbRead(remote_bda);

    *p_addr_type = BLE_ADDR_PUBLIC;

    if (!p_dev_rec)
    {
        *p_dev_type = BT_DEVICE_TYPE_BREDR;
        /* Check with the BT manager if details about remote device are known */
        if (p_inq_info != NULL)
        {
            *p_dev_type = p_inq_info->results.device_type ;
            *p_addr_type = p_inq_info->results.ble_addr_type;
        } else {
            /* unknown device, assume BR/EDR */
            BTM_TRACE_DEBUG ("btm_find_dev_type - unknown device, BR/EDR assumed");
        }
    }
    else /* there is a security device record exisitng */
    {
        /* new inquiry result, overwrite device type in security device record */
        if (p_inq_info)
        {
            p_dev_rec->device_type          = p_inq_info->results.device_type;
            p_dev_rec->ble.ble_addr_type    = p_inq_info->results.ble_addr_type;
        }
        if (memcmp(p_dev_rec->bd_addr, remote_bda, BD_ADDR_LEN) == 0 &&
            memcmp(p_dev_rec->ble.pseudo_addr, remote_bda, BD_ADDR_LEN) == 0)
        {
            *p_dev_type = p_dev_rec->device_type;
            *p_addr_type = p_dev_rec->ble.ble_addr_type;
        }
        else if (memcmp(p_dev_rec->ble.pseudo_addr, remote_bda, BD_ADDR_LEN) == 0)
        {
            *p_dev_type = BT_DEVICE_TYPE_BLE;
            *p_addr_type = p_dev_rec->ble.ble_addr_type;
        }
        else  /* matching static adddress only */
        {
            *p_dev_type = BT_DEVICE_TYPE_BREDR;
            *p_addr_type = BLE_ADDR_PUBLIC;
        }

    }

    BTM_TRACE_DEBUG ("btm_find_dev_type - device_type = %d addr_type = %d", *p_dev_type , *p_addr_type);
}

/*******************************************************************************
 *
 * Function         BTM_ReadConnectedTransportAddress
 *
 * Description      This function is called to read the paired device/address type of other device paired
 *                  corresponding to the BD_address
 *
 * Parameter        remote_bda: remote device address, carry out the transport address
 *                  transport: active transport
 *
 * Return           true if an active link is identified; false otherwise
 *
 ******************************************************************************/
bool    BTM_ReadConnectedTransportAddress(BD_ADDR remote_bda, tBT_TRANSPORT transport)
{
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev(remote_bda);

    /* if no device can be located, return */
    if (p_dev_rec == NULL)
        return false;

    if (transport == BT_TRANSPORT_BR_EDR)
    {
        if (btm_bda_to_acl(p_dev_rec->bd_addr, transport) != NULL)
        {
            memcpy(remote_bda, p_dev_rec->bd_addr, BD_ADDR_LEN);
            return true;
        }
        else if (p_dev_rec->device_type & BT_DEVICE_TYPE_BREDR)
        {
            memcpy(remote_bda, p_dev_rec->bd_addr, BD_ADDR_LEN);
        }
        else
            memset(remote_bda, 0, BD_ADDR_LEN);
        return false;
    }

    if (transport == BT_TRANSPORT_LE)
    {
        memcpy(remote_bda, p_dev_rec->ble.pseudo_addr, BD_ADDR_LEN);
        if (btm_bda_to_acl(p_dev_rec->ble.pseudo_addr, transport) != NULL)
            return true;
        else
            return false;
    }

    return false;
}

/*******************************************************************************
 *
 * Function         BTM_BleReceiverTest
 *
 * Description      This function is called to start the LE Receiver test
 *
 * Parameter       rx_freq - Frequency Range
 *               p_cmd_cmpl_cback - Command Complete callback
 *
 ******************************************************************************/
void BTM_BleReceiverTest(uint8_t rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback)
{
     btm_cb.devcb.p_le_test_cmd_cmpl_cb = p_cmd_cmpl_cback;

     btsnd_hcic_ble_receiver_test(rx_freq);
}

/*******************************************************************************
 *
 * Function         BTM_BleTransmitterTest
 *
 * Description      This function is called to start the LE Transmitter test
 *
 * Parameter       tx_freq - Frequency Range
 *                       test_data_len - Length in bytes of payload data in each packet
 *                       packet_payload - Pattern to use in the payload
 *                       p_cmd_cmpl_cback - Command Complete callback
 *
 ******************************************************************************/
void BTM_BleTransmitterTest(uint8_t tx_freq, uint8_t test_data_len,
                                 uint8_t packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback)
{
     btm_cb.devcb.p_le_test_cmd_cmpl_cb = p_cmd_cmpl_cback;
     btsnd_hcic_ble_transmitter_test(tx_freq, test_data_len, packet_payload);
}

/*******************************************************************************
 *
 * Function         BTM_BleTestEnd
 *
 * Description      This function is called to stop the in-progress TX or RX test
 *
 * Parameter       p_cmd_cmpl_cback - Command complete callback
 *
 ******************************************************************************/
void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback)
{
     btm_cb.devcb.p_le_test_cmd_cmpl_cb = p_cmd_cmpl_cback;

     btsnd_hcic_ble_test_end();
}

/*******************************************************************************
 * Internal Functions
 ******************************************************************************/
void btm_ble_test_command_complete(uint8_t *p)
{
    tBTM_CMPL_CB   *p_cb = btm_cb.devcb.p_le_test_cmd_cmpl_cb;

    btm_cb.devcb.p_le_test_cmd_cmpl_cb = NULL;

    if (p_cb)
    {
        (*p_cb)(p);
    }
}

/*******************************************************************************
 *
 * Function         BTM_UseLeLink
 *
 * Description      This function is to select the underneath physical link to use.
 *
 * Returns          true to use LE, false use BR/EDR.
 *
 ******************************************************************************/
bool    BTM_UseLeLink (BD_ADDR bd_addr)
{
    tACL_CONN         *p;
    tBT_DEVICE_TYPE     dev_type;
    tBLE_ADDR_TYPE      addr_type;
    bool                use_le = false;

    p = btm_bda_to_acl(bd_addr, BT_TRANSPORT_BR_EDR);
    if (p != NULL) {
        return use_le;
    } else {
        p = btm_bda_to_acl(bd_addr, BT_TRANSPORT_LE);
        if (p != NULL) {
            use_le = true;
        } else {
            BTM_ReadDevInfo(bd_addr, &dev_type, &addr_type);
            use_le = (dev_type == BT_DEVICE_TYPE_BLE);
        }
    }
    return use_le;
}

/*******************************************************************************
 *
 * Function         BTM_SetBleDataLength
 *
 * Description      This function is to set maximum BLE transmission packet size
 *
 * Returns          BTM_SUCCESS if success; otherwise failed.
 *
 ******************************************************************************/
tBTM_STATUS BTM_SetBleDataLength(BD_ADDR bd_addr, uint16_t tx_pdu_length)
{
    tACL_CONN *p_acl = btm_bda_to_acl(bd_addr, BT_TRANSPORT_LE);

    if(p_acl == NULL)
    {
        BTM_TRACE_ERROR("%s: Wrong mode: no LE link exist or LE not supported",__func__);
        return BTM_WRONG_MODE;
    }

    BTM_TRACE_DEBUG("%s: tx_pdu_length =%d", __func__, tx_pdu_length);

    if (!controller_get_interface()->supports_ble_packet_extension())
    {
        BTM_TRACE_ERROR("%s failed, request not supported", __func__);
        return BTM_ILLEGAL_VALUE;
    }

    if (!HCI_LE_DATA_LEN_EXT_SUPPORTED(p_acl->peer_le_features))
    {
        BTM_TRACE_ERROR("%s failed, peer does not support request", __func__);
        return BTM_ILLEGAL_VALUE;
    }

    if (tx_pdu_length > BTM_BLE_DATA_SIZE_MAX)
        tx_pdu_length =  BTM_BLE_DATA_SIZE_MAX;
    else if (tx_pdu_length < BTM_BLE_DATA_SIZE_MIN)
        tx_pdu_length =  BTM_BLE_DATA_SIZE_MIN;

    /* always set the TxTime to be max, as controller does not care for now */
    btsnd_hcic_ble_set_data_length(p_acl->hci_handle, tx_pdu_length,
                                        BTM_BLE_DATA_TX_TIME_MAX);

    return BTM_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btm_ble_determine_security_act
 *
 * Description      This function checks the security of current LE link
 *                  and returns the appropriate action that needs to be
 *                  taken to achieve the required security.
 *
 * Parameter        is_originator - True if outgoing connection
 *                  bdaddr: remote device address
 *                  security_required: Security required for the service.
 *
 * Returns          The appropriate security action required.
 *
 ******************************************************************************/
tBTM_SEC_ACTION btm_ble_determine_security_act(bool    is_originator, BD_ADDR bdaddr, uint16_t security_required)
{
    tBTM_LE_AUTH_REQ auth_req = 0x00;

    if (is_originator)
    {
        if ((security_required & BTM_SEC_OUT_FLAGS) == 0 &&
                (security_required & BTM_SEC_OUT_MITM) == 0)
        {
            BTM_TRACE_DEBUG ("%s No security required for outgoing connection", __func__);
            return BTM_SEC_OK;
        }

        if (security_required & BTM_SEC_OUT_MITM)
            auth_req |= BTM_LE_AUTH_REQ_MITM;
    }
    else
    {
        if ((security_required & BTM_SEC_IN_FLAGS) == 0&& (security_required & BTM_SEC_IN_MITM) == 0)
        {
            BTM_TRACE_DEBUG ("%s No security required for incoming connection", __func__);
            return BTM_SEC_OK;
        }

        if (security_required & BTM_SEC_IN_MITM)
            auth_req |= BTM_LE_AUTH_REQ_MITM;
    }

    tBTM_BLE_SEC_REQ_ACT ble_sec_act;
    btm_ble_link_sec_check(bdaddr, auth_req, &ble_sec_act);

    BTM_TRACE_DEBUG ("%s ble_sec_act %d", __func__ , ble_sec_act);

    if (ble_sec_act == BTM_BLE_SEC_REQ_ACT_DISCARD)
        return BTM_SEC_ENC_PENDING;

    if (ble_sec_act == BTM_BLE_SEC_REQ_ACT_NONE)
        return BTM_SEC_OK;

    uint8_t sec_flag = 0;
    BTM_GetSecurityFlagsByTransport(bdaddr, &sec_flag, BT_TRANSPORT_LE);

    bool    is_link_encrypted = false;
    bool    is_key_mitm = false;
    if (sec_flag & (BTM_SEC_FLAG_ENCRYPTED| BTM_SEC_FLAG_LKEY_KNOWN))
    {
        if (sec_flag & BTM_SEC_FLAG_ENCRYPTED)
            is_link_encrypted = true;

        if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED)
            is_key_mitm = true;
    }

    if (auth_req & BTM_LE_AUTH_REQ_MITM)
    {
        if (!is_key_mitm)
        {
            return BTM_SEC_ENCRYPT_MITM;
        } else {
            if (is_link_encrypted)
                return BTM_SEC_OK;
            else
                return BTM_SEC_ENCRYPT;
        }
    } else {
        if (is_link_encrypted)
            return BTM_SEC_OK;
        else
            return BTM_SEC_ENCRYPT_NO_MITM;
    }

    return BTM_SEC_OK;
}

/*******************************************************************************
 *
 * Function         btm_ble_start_sec_check
 *
 * Description      This function is to check and set the security required for
 *                  LE link for LE COC.
 *
 * Parameter        bdaddr: remote device address.
 *                  psm : PSM of the LE COC sevice.
 *                  is_originator: true if outgoing connection.
 *                  p_callback : Pointer to the callback function.
 *                  p_ref_data : Pointer to be returned along with the callback.
 *
 * Returns          true if link already meets the required security; otherwise false.
 *
 ******************************************************************************/
bool    btm_ble_start_sec_check(BD_ADDR bd_addr, uint16_t psm, bool    is_originator,
                            tBTM_SEC_CALLBACK *p_callback, void *p_ref_data)
{
    /* Find the service record for the PSM */
    tBTM_SEC_SERV_REC *p_serv_rec = btm_sec_find_first_serv (is_originator, psm);

    /* If there is no application registered with this PSM do not allow connection */
    if (!p_serv_rec)
    {
        BTM_TRACE_WARNING ("%s PSM: %d no application registerd", __func__, psm);
        (*p_callback) (bd_addr, BT_TRANSPORT_LE, p_ref_data, BTM_MODE_UNSUPPORTED);
        return false;
    }

    tBTM_SEC_ACTION sec_act = btm_ble_determine_security_act(is_originator,
                                  bd_addr, p_serv_rec->security_flags);

    tBTM_BLE_SEC_ACT ble_sec_act = BTM_BLE_SEC_NONE;
    bool    status = false;

    switch (sec_act)
    {
        case BTM_SEC_OK:
            BTM_TRACE_DEBUG ("%s Security met", __func__);
            p_callback(bd_addr, BT_TRANSPORT_LE, p_ref_data, BTM_SUCCESS);
            status = true;
            break;

        case BTM_SEC_ENCRYPT:
            BTM_TRACE_DEBUG ("%s Encryption needs to be done", __func__);
            ble_sec_act = BTM_BLE_SEC_ENCRYPT;
            break;

        case BTM_SEC_ENCRYPT_MITM:
            BTM_TRACE_DEBUG ("%s Pairing with MITM needs to be done", __func__);
            ble_sec_act = BTM_BLE_SEC_ENCRYPT_MITM;
            break;

        case BTM_SEC_ENCRYPT_NO_MITM:
            BTM_TRACE_DEBUG ("%s Pairing with No MITM needs to be done", __func__);
            ble_sec_act = BTM_BLE_SEC_ENCRYPT_NO_MITM;
            break;

        case BTM_SEC_ENC_PENDING:
            BTM_TRACE_DEBUG ("%s Ecryption pending", __func__);
            break;
    }

    if (ble_sec_act == BTM_BLE_SEC_NONE)
        return status;

    tL2C_LCB *p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, BT_TRANSPORT_LE);
    p_lcb->sec_act = sec_act;
    BTM_SetEncryption(bd_addr, BT_TRANSPORT_LE, p_callback, p_ref_data, ble_sec_act);

    return false;
}

/*******************************************************************************
 *
 * Function         btm_ble_rand_enc_complete
 *
 * Description      This function is the callback functions for HCI_Rand command
 *                  and HCI_Encrypt command is completed.
 *                  This message is received from the HCI.
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_rand_enc_complete (uint8_t *p, uint16_t op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback)
{
    tBTM_RAND_ENC   params;
    uint8_t         *p_dest = params.param_buf;

    BTM_TRACE_DEBUG ("btm_ble_rand_enc_complete");

    memset(&params, 0, sizeof(tBTM_RAND_ENC));

    /* If there was a callback address for vcs complete, call it */
    if (p_enc_cplt_cback && p)
    {
        /* Pass paramters to the callback function */
        STREAM_TO_UINT8(params.status, p); /* command status */

        if (params.status == HCI_SUCCESS)
        {
            params.opcode = op_code;

            if (op_code == HCI_BLE_RAND)
                params.param_len = BT_OCTET8_LEN;
            else
                params.param_len = BT_OCTET16_LEN;

            memcpy(p_dest, p, params.param_len);  /* Fetch return info from HCI event message */
        }
        if (p_enc_cplt_cback)
            (*p_enc_cplt_cback)(&params);  /* Call the Encryption complete callback function */
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_get_enc_key_type
 *
 * Description      This function is to increment local sign counter
 * Returns         None
 *
 ******************************************************************************/
void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, bool    is_local )
{
    tBTM_SEC_DEV_REC *p_dev_rec;

    BTM_TRACE_DEBUG ("btm_ble_increment_sign_ctr is_local=%d", is_local);

    p_dev_rec = btm_find_dev(bd_addr);
    if (p_dev_rec != NULL)
    {
        if (is_local)
            p_dev_rec->ble.keys.local_counter++;
        else
            p_dev_rec->ble.keys.counter++;
        BTM_TRACE_DEBUG ("is_local=%d local sign counter=%d peer sign counter=%d",
                          is_local,
                          p_dev_rec->ble.keys.local_counter,
                          p_dev_rec->ble.keys.counter);
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_get_enc_key_type
 *
 * Description      This function is to get the BLE key type that has been exchanged
 *                  in betweem local device and peer device.
 *
 * Returns          p_key_type: output parameter to carry the key type value.
 *
 ******************************************************************************/
bool    btm_ble_get_enc_key_type(BD_ADDR bd_addr, uint8_t *p_key_types)
{
    tBTM_SEC_DEV_REC *p_dev_rec;

    BTM_TRACE_DEBUG ("btm_ble_get_enc_key_type");

    p_dev_rec = btm_find_dev(bd_addr);
    if (p_dev_rec != NULL)
    {
        *p_key_types = p_dev_rec->ble.key_type;
        return true;
    }
    return false;
}

/*******************************************************************************
 *
 * Function         btm_get_local_div
 *
 * Description      This function is called to read the local DIV
 *
 * Returns          TURE - if a valid DIV is availavle
 ******************************************************************************/
bool    btm_get_local_div (BD_ADDR bd_addr, uint16_t *p_div)
{
    tBTM_SEC_DEV_REC   *p_dev_rec;
    bool               status = false;
    BTM_TRACE_DEBUG ("btm_get_local_div");

    BTM_TRACE_DEBUG("bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
                     bd_addr[0],bd_addr[1],
                     bd_addr[2],bd_addr[3],
                     bd_addr[4],bd_addr[5]);

    *p_div = 0;
    p_dev_rec = btm_find_dev (bd_addr);

    if (p_dev_rec && p_dev_rec->ble.keys.div)
    {
        status = true;
        *p_div = p_dev_rec->ble.keys.div;
    }
    BTM_TRACE_DEBUG ("btm_get_local_div status=%d (1-OK) DIV=0x%x", status, *p_div);
    return status;
}

/*******************************************************************************
 *
 * Function         btm_sec_save_le_key
 *
 * Description      This function is called by the SMP to update
 *                  an  BLE key.  SMP is internal, whereas all the keys shall
 *                  be sent to the application.  The function is also called
 *                  when application passes ble key stored in NVRAM to the btm_sec.
 *                  pass_to_application parameter is false in this case.
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys,
                         bool    pass_to_application)
{
    tBTM_SEC_DEV_REC *p_rec;
    tBTM_LE_EVT_DATA    cb_data;
    uint8_t i;

    BTM_TRACE_DEBUG ("btm_sec_save_le_key key_type=0x%x pass_to_application=%d",key_type, pass_to_application);
    /* Store the updated key in the device database */

    BTM_TRACE_DEBUG("bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
                     bd_addr[0],bd_addr[1],
                     bd_addr[2],bd_addr[3],
                     bd_addr[4],bd_addr[5]);

    if ((p_rec = btm_find_dev (bd_addr)) != NULL && (p_keys || key_type== BTM_LE_KEY_LID))
    {
        btm_ble_init_pseudo_addr (p_rec, bd_addr);

        switch (key_type)
        {
            case BTM_LE_KEY_PENC:
                memcpy(p_rec->ble.keys.pltk, p_keys->penc_key.ltk, BT_OCTET16_LEN);
                memcpy(p_rec->ble.keys.rand, p_keys->penc_key.rand, BT_OCTET8_LEN);
                p_rec->ble.keys.sec_level = p_keys->penc_key.sec_level;
                p_rec->ble.keys.ediv = p_keys->penc_key.ediv;
                p_rec->ble.keys.key_size = p_keys->penc_key.key_size;
                p_rec->ble.key_type |= BTM_LE_KEY_PENC;
                p_rec->sec_flags |= BTM_SEC_LE_LINK_KEY_KNOWN;
                if (p_keys->penc_key.sec_level == SMP_SEC_AUTHENTICATED)
                    p_rec->sec_flags |= BTM_SEC_LE_LINK_KEY_AUTHED;
                else
                    p_rec->sec_flags &= ~BTM_SEC_LE_LINK_KEY_AUTHED;
                BTM_TRACE_DEBUG("BTM_LE_KEY_PENC key_type=0x%x sec_flags=0x%x sec_leve=0x%x",
                                 p_rec->ble.key_type,
                                 p_rec->sec_flags,
                                 p_rec->ble.keys.sec_level);
                break;

            case BTM_LE_KEY_PID:
                for (i=0; i<BT_OCTET16_LEN; i++)
                {
                    p_rec->ble.keys.irk[i] = p_keys->pid_key.irk[i];
                }

                 //memcpy( p_rec->ble.keys.irk, p_keys->pid_key, BT_OCTET16_LEN); todo will crash the system
                memcpy(p_rec->ble.static_addr, p_keys->pid_key.static_addr, BD_ADDR_LEN);
                p_rec->ble.static_addr_type = p_keys->pid_key.addr_type;
                p_rec->ble.key_type |= BTM_LE_KEY_PID;
                BTM_TRACE_DEBUG("BTM_LE_KEY_PID key_type=0x%x save peer IRK",  p_rec->ble.key_type);
                 /* update device record address as static address */
                memcpy(p_rec->bd_addr, p_keys->pid_key.static_addr, BD_ADDR_LEN);
                /* combine DUMO device security record if needed */
                btm_consolidate_dev(p_rec);
                break;

            case BTM_LE_KEY_PCSRK:
                memcpy(p_rec->ble.keys.pcsrk, p_keys->pcsrk_key.csrk, BT_OCTET16_LEN);
                p_rec->ble.keys.srk_sec_level = p_keys->pcsrk_key.sec_level;
                p_rec->ble.keys.counter  = p_keys->pcsrk_key.counter;
                p_rec->ble.key_type |= BTM_LE_KEY_PCSRK;
                p_rec->sec_flags |=  BTM_SEC_LE_LINK_KEY_KNOWN;
                if ( p_keys->pcsrk_key.sec_level== SMP_SEC_AUTHENTICATED)
                    p_rec->sec_flags |= BTM_SEC_LE_LINK_KEY_AUTHED;
                else
                    p_rec->sec_flags &= ~BTM_SEC_LE_LINK_KEY_AUTHED;

                BTM_TRACE_DEBUG("BTM_LE_KEY_PCSRK key_type=0x%x sec_flags=0x%x sec_level=0x%x peer_counter=%d",
                                 p_rec->ble.key_type,
                                 p_rec->sec_flags,
                                 p_rec->ble.keys.srk_sec_level,
                                 p_rec->ble.keys.counter );
                break;

            case BTM_LE_KEY_LENC:
                memcpy(p_rec->ble.keys.lltk, p_keys->lenc_key.ltk, BT_OCTET16_LEN);
                p_rec->ble.keys.div = p_keys->lenc_key.div; /* update DIV */
                p_rec->ble.keys.sec_level = p_keys->lenc_key.sec_level;
                p_rec->ble.keys.key_size = p_keys->lenc_key.key_size;
                p_rec->ble.key_type |= BTM_LE_KEY_LENC;

                BTM_TRACE_DEBUG("BTM_LE_KEY_LENC key_type=0x%x DIV=0x%x key_size=0x%x sec_level=0x%x",
                                 p_rec->ble.key_type,
                                 p_rec->ble.keys.div,
                                 p_rec->ble.keys.key_size,
                                 p_rec->ble.keys.sec_level );
                break;

            case BTM_LE_KEY_LCSRK:/* local CSRK has been delivered */
                memcpy (p_rec->ble.keys.lcsrk, p_keys->lcsrk_key.csrk, BT_OCTET16_LEN);
                p_rec->ble.keys.div = p_keys->lcsrk_key.div; /* update DIV */
                p_rec->ble.keys.local_csrk_sec_level = p_keys->lcsrk_key.sec_level;
                p_rec->ble.keys.local_counter  = p_keys->lcsrk_key.counter;
                p_rec->ble.key_type |= BTM_LE_KEY_LCSRK;
                BTM_TRACE_DEBUG("BTM_LE_KEY_LCSRK key_type=0x%x DIV=0x%x scrk_sec_level=0x%x local_counter=%d",
                                 p_rec->ble.key_type,
                                 p_rec->ble.keys.div,
                                 p_rec->ble.keys.local_csrk_sec_level,
                                 p_rec->ble.keys.local_counter );
                break;

            case BTM_LE_KEY_LID:
               p_rec->ble.key_type |= BTM_LE_KEY_LID;
               break;
            default:
                BTM_TRACE_WARNING("btm_sec_save_le_key (Bad key_type 0x%02x)", key_type);
                return;
        }

        BTM_TRACE_DEBUG ("BLE key type 0x%02x updated for BDA: %08x%04x (btm_sec_save_le_key)", key_type,
                          (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
                          (bd_addr[4]<<8)+bd_addr[5]);

        /* Notify the application that one of the BLE keys has been updated
           If link key is in progress, it will get sent later.*/
        if (pass_to_application && btm_cb.api.p_le_callback)
        {
            cb_data.key.p_key_value = p_keys;
            cb_data.key.key_type = key_type;

            (*btm_cb.api.p_le_callback) (BTM_LE_KEY_EVT, bd_addr, &cb_data);
        }
        return;
    }

    BTM_TRACE_WARNING ("BLE key type 0x%02x called for Unknown BDA or type: %08x%04x !! (btm_sec_save_le_key)", key_type,
                        (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
                        (bd_addr[4]<<8)+bd_addr[5]);

    if (p_rec)
    {
        BTM_TRACE_DEBUG ("sec_flags=0x%x", p_rec->sec_flags);
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_update_sec_key_size
 *
 * Description      update the current lin kencryption key size
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_update_sec_key_size(BD_ADDR bd_addr, uint8_t enc_key_size)
{
    tBTM_SEC_DEV_REC *p_rec;

    BTM_TRACE_DEBUG("btm_ble_update_sec_key_size enc_key_size = %d", enc_key_size);

    p_rec = btm_find_dev(bd_addr);
    if (p_rec != NULL )
    {
        p_rec->enc_key_size = enc_key_size;
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_read_sec_key_size
 *
 * Description      update the current lin kencryption key size
 *
 * Returns          void
 *
 ******************************************************************************/
uint8_t btm_ble_read_sec_key_size(BD_ADDR bd_addr)
{
    tBTM_SEC_DEV_REC *p_rec;

    p_rec = btm_find_dev(bd_addr);
    if (p_rec != NULL )
    {
        return p_rec->enc_key_size;
    }
    else
        return 0;
}

/*******************************************************************************
 *
 * Function         btm_ble_link_sec_check
 *
 * Description      Check BLE link security level match.
 *
 * Returns          true: check is OK and the *p_sec_req_act contain the action
 *
 ******************************************************************************/
void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act)
{
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
    uint8_t req_sec_level = BTM_LE_SEC_NONE, cur_sec_level = BTM_LE_SEC_NONE;

    BTM_TRACE_DEBUG ("btm_ble_link_sec_check auth_req =0x%x", auth_req);

    if (p_dev_rec == NULL)
    {
        BTM_TRACE_ERROR ("btm_ble_link_sec_check received for unknown device");
        return;
    }

    if (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING ||
        p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING)
    {
        /* race condition: discard the security request while master is encrypting the link */
        *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_DISCARD;
    }
    else
    {
        req_sec_level = BTM_LE_SEC_UNAUTHENTICATE;
        if (auth_req & BTM_LE_AUTH_REQ_MITM)
        {
            req_sec_level = BTM_LE_SEC_AUTHENTICATED;
        }

        BTM_TRACE_DEBUG ("dev_rec sec_flags=0x%x", p_dev_rec->sec_flags);

        /* currently encrpted  */
        if (p_dev_rec->sec_flags & BTM_SEC_LE_ENCRYPTED)
        {
            if (p_dev_rec->sec_flags & BTM_SEC_LE_AUTHENTICATED)
                cur_sec_level = BTM_LE_SEC_AUTHENTICATED;
            else
                cur_sec_level = BTM_LE_SEC_UNAUTHENTICATE;
        }
        else /* unencrypted link */
        {
            /* if bonded, get the key security level */
            if (p_dev_rec->ble.key_type & BTM_LE_KEY_PENC)
                cur_sec_level = p_dev_rec->ble.keys.sec_level;
            else
                cur_sec_level = BTM_LE_SEC_NONE;
        }

        if (cur_sec_level >= req_sec_level)
        {
            /* To avoid re-encryption on an encrypted link for an equal condition encryption */
            *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_ENCRYPT;
        }
        else
        {
            *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_PAIR; /* start the pariring process to upgrade the keys*/
        }
    }

    BTM_TRACE_DEBUG("cur_sec_level=%d req_sec_level=%d sec_req_act=%d",
                     cur_sec_level,
                     req_sec_level,
                     *p_sec_req_act);

}

/*******************************************************************************
 *
 * Function         btm_ble_set_encryption
 *
 * Description      This function is called to ensure that LE connection is
 *                  encrypted.  Should be called only on an open connection.
 *                  Typically only needed for connections that first want to
 *                  bring up unencrypted links, then later encrypt them.
 *
 * Returns          void
 *                  the local device ER is copied into er
 *
 ******************************************************************************/
tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, tBTM_BLE_SEC_ACT sec_act, uint8_t link_role)
{
    tBTM_STATUS         cmd = BTM_NO_RESOURCES;
    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bd_addr);
    tBTM_BLE_SEC_REQ_ACT sec_req_act;
    tBTM_LE_AUTH_REQ    auth_req;

    if (p_rec == NULL)
    {
        BTM_TRACE_WARNING ("btm_ble_set_encryption (NULL device record!! sec_act=0x%x", sec_act);
        return(BTM_WRONG_MODE);
    }

    BTM_TRACE_DEBUG ("btm_ble_set_encryption sec_act=0x%x role_master=%d", sec_act, p_rec->role_master);

    if (sec_act == BTM_BLE_SEC_ENCRYPT_MITM)
    {
        p_rec->security_required |= BTM_SEC_IN_MITM;
    }

    switch (sec_act)
    {
        case BTM_BLE_SEC_ENCRYPT:
            if (link_role == BTM_ROLE_MASTER)
            {
                    /* start link layer encryption using the security info stored */
                cmd = btm_ble_start_encrypt(bd_addr, false, NULL);
                break;
            }
            /* if salve role then fall through to call SMP_Pair below which will send a
               sec_request to request the master to encrypt the link */
        case BTM_BLE_SEC_ENCRYPT_NO_MITM:
        case BTM_BLE_SEC_ENCRYPT_MITM:
            auth_req = (sec_act == BTM_BLE_SEC_ENCRYPT_NO_MITM)
                       ? SMP_AUTH_GEN_BOND : (SMP_AUTH_GEN_BOND | SMP_AUTH_YN_BIT);
            btm_ble_link_sec_check (bd_addr, auth_req, &sec_req_act);
            if(sec_req_act == BTM_BLE_SEC_REQ_ACT_NONE || sec_req_act == BTM_BLE_SEC_REQ_ACT_DISCARD)
            {
                BTM_TRACE_DEBUG("%s, no action needed. Ignore", __func__);
                cmd = BTM_SUCCESS;
                break;
            }
            if (link_role == BTM_ROLE_MASTER)
            {

                if (sec_req_act == BTM_BLE_SEC_REQ_ACT_ENCRYPT)
                {
                   cmd = btm_ble_start_encrypt(bd_addr, false, NULL);
                   break;
                }
            }

            if (SMP_Pair(bd_addr) == SMP_STARTED)
            {
                cmd = BTM_CMD_STARTED;
                p_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING;
            }
            break;

        default:
            cmd = BTM_WRONG_MODE;
            break;
    }
    return cmd;
}

/*******************************************************************************
 *
 * Function         btm_ble_ltk_request
 *
 * Description      This function is called when encryption request is received
 *                  on a slave device.
 *
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_ltk_request(uint16_t handle, uint8_t rand[8], uint16_t ediv)
{
    tBTM_CB *p_cb = &btm_cb;
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev_by_handle (handle);
    BT_OCTET8 dummy_stk = {0};

    BTM_TRACE_DEBUG ("btm_ble_ltk_request");

    p_cb->ediv = ediv;

    memcpy(p_cb->enc_rand, rand, BT_OCTET8_LEN);

    if (p_dev_rec != NULL)
    {
        if (!smp_proc_ltk_request(p_dev_rec->bd_addr))
            btm_ble_ltk_request_reply(p_dev_rec->bd_addr, false, dummy_stk);
    }

}

/*******************************************************************************
 *
 * Function         btm_ble_start_encrypt
 *
 * Description      This function is called to start LE encryption.
 *
 *
 * Returns          BTM_SUCCESS if encryption was started successfully
 *
 ******************************************************************************/
tBTM_STATUS btm_ble_start_encrypt(BD_ADDR bda, bool    use_stk, BT_OCTET16 stk)
{
    tBTM_CB *p_cb = &btm_cb;
    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bda);
    BT_OCTET8    dummy_rand = {0};

    BTM_TRACE_DEBUG ("btm_ble_start_encrypt");

    if (!p_rec )
    {
        BTM_TRACE_ERROR("Link is not active, can not encrypt!");
        return BTM_WRONG_MODE;
    }

    if (p_rec->sec_state == BTM_SEC_STATE_ENCRYPTING)
    {
        BTM_TRACE_WARNING("Link Encryption is active, Busy!");
        return BTM_BUSY;
    }

    p_cb->enc_handle = p_rec->ble_hci_handle;

    if (use_stk)
    {
        btsnd_hcic_ble_start_enc(p_rec->ble_hci_handle, dummy_rand, 0, stk);
    }
    else if (p_rec->ble.key_type & BTM_LE_KEY_PENC)
    {
        btsnd_hcic_ble_start_enc(p_rec->ble_hci_handle, p_rec->ble.keys.rand,
                                 p_rec->ble.keys.ediv, p_rec->ble.keys.pltk);
    }
    else
    {
        BTM_TRACE_ERROR("No key available to encrypt the link");
        return BTM_NO_RESOURCES;
    }

    if (p_rec->sec_state == BTM_SEC_STATE_IDLE)
        p_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;

    return BTM_CMD_STARTED;
}

/*******************************************************************************
 *
 * Function         btm_ble_link_encrypted
 *
 * Description      This function is called when LE link encrption status is changed.
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_link_encrypted(BD_ADDR bd_addr, uint8_t encr_enable)
{
    tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_dev (bd_addr);
    bool                enc_cback;

    if (!p_dev_rec)
    {
        BTM_TRACE_WARNING ("btm_ble_link_encrypted (No Device Found!) encr_enable=%d", encr_enable);
        return;
    }

    BTM_TRACE_DEBUG ("btm_ble_link_encrypted encr_enable=%d", encr_enable);

    enc_cback = (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING);

    smp_link_encrypted(bd_addr, encr_enable);

    BTM_TRACE_DEBUG(" p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags);

    if (encr_enable && p_dev_rec->enc_key_size == 0)
        p_dev_rec->enc_key_size = p_dev_rec->ble.keys.key_size;

    p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
    if (p_dev_rec->p_callback && enc_cback)
    {
        if (encr_enable)
            btm_sec_dev_rec_cback_event(p_dev_rec, BTM_SUCCESS, true);
        else if (p_dev_rec->role_master)
            btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING, true);

    }
    /* to notify GATT to send data if any request is pending */
    gatt_notify_enc_cmpl(p_dev_rec->ble.pseudo_addr);
}

/*******************************************************************************
 *
 * Function         btm_ble_ltk_request_reply
 *
 * Description      This function is called to send a LTK request reply on a slave
 *                  device.
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_ltk_request_reply(BD_ADDR bda,  bool    use_stk, BT_OCTET16 stk)
{
    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bda);
    tBTM_CB *p_cb = &btm_cb;

    if (p_rec == NULL)
    {
        BTM_TRACE_ERROR("btm_ble_ltk_request_reply received for unknown device");
        return;
    }

    BTM_TRACE_DEBUG ("btm_ble_ltk_request_reply");
    p_cb->enc_handle = p_rec->ble_hci_handle;
    p_cb->key_size = p_rec->ble.keys.key_size;

    BTM_TRACE_ERROR("key size = %d", p_rec->ble.keys.key_size);
    if (use_stk)
    {
        btsnd_hcic_ble_ltk_req_reply(btm_cb.enc_handle, stk);
    }
    else /* calculate LTK using peer device  */
    {
        if (p_rec->ble.key_type & BTM_LE_KEY_LENC)
            btsnd_hcic_ble_ltk_req_reply(btm_cb.enc_handle, p_rec->ble.keys.lltk);
        else
            btsnd_hcic_ble_ltk_req_neg_reply(btm_cb.enc_handle);
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_io_capabilities_req
 *
 * Description      This function is called to handle SMP get IO capability request.
 *
 * Returns          void
 *
 ******************************************************************************/
uint8_t btm_ble_io_capabilities_req(tBTM_SEC_DEV_REC *p_dev_rec, tBTM_LE_IO_REQ *p_data)
{
    uint8_t         callback_rc = BTM_SUCCESS;
    BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req");
    if (btm_cb.api.p_le_callback)
    {
        /* the callback function implementation may change the IO capability... */
        callback_rc = (*btm_cb.api.p_le_callback) (BTM_LE_IO_REQ_EVT, p_dev_rec->bd_addr, (tBTM_LE_EVT_DATA *)p_data);
    }
    if ((callback_rc == BTM_SUCCESS) || (BTM_OOB_UNKNOWN != p_data->oob_data))
    {
#if (BTM_BLE_CONFORMANCE_TESTING == TRUE)
        if (btm_cb.devcb.keep_rfu_in_auth_req)
        {
            BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req keep_rfu_in_auth_req = %u",
                btm_cb.devcb.keep_rfu_in_auth_req);
            p_data->auth_req &= BTM_LE_AUTH_REQ_MASK_KEEP_RFU;
            btm_cb.devcb.keep_rfu_in_auth_req = false;
        }
        else
        {   /* default */
            p_data->auth_req &= BTM_LE_AUTH_REQ_MASK;
        }
#else
        p_data->auth_req &= BTM_LE_AUTH_REQ_MASK;
#endif

        BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req 1: p_dev_rec->security_required = %d auth_req:%d",
                          p_dev_rec->security_required, p_data->auth_req);
        BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req 2: i_keys=0x%x r_keys=0x%x (bit 0-LTK 1-IRK 2-CSRK)",
                          p_data->init_keys,
                          p_data->resp_keys);

        /* if authentication requires MITM protection, put on the mask */
        if (p_dev_rec->security_required & BTM_SEC_IN_MITM)
            p_data->auth_req |= BTM_LE_AUTH_REQ_MITM;

        if (!(p_data->auth_req & SMP_AUTH_BOND))
        {
            BTM_TRACE_DEBUG("Non bonding: No keys should be exchanged");
            p_data->init_keys = 0;
            p_data->resp_keys = 0;
        }

        BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req 3: auth_req:%d", p_data->auth_req);
        BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req 4: i_keys=0x%x r_keys=0x%x",
                          p_data->init_keys,
                          p_data->resp_keys);

        BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req 5: p_data->io_cap = %d auth_req:%d",
                          p_data->io_cap, p_data->auth_req);

        /* remove MITM protection requirement if IO cap does not allow it */
        if ((p_data->io_cap == BTM_IO_CAP_NONE) && p_data->oob_data == SMP_OOB_NONE)
            p_data->auth_req &= ~BTM_LE_AUTH_REQ_MITM;

        if (!(p_data->auth_req & SMP_SC_SUPPORT_BIT))
        {
            /* if Secure Connections are not supported then remove LK derivation,
            ** and keypress notifications.
            */
            BTM_TRACE_DEBUG("%s-SC not supported -> No LK derivation, no keypress notifications",
                            __func__);
            p_data->auth_req &= ~SMP_KP_SUPPORT_BIT;
            p_data->init_keys &= ~SMP_SEC_KEY_TYPE_LK;
            p_data->resp_keys &= ~SMP_SEC_KEY_TYPE_LK;
        }

        BTM_TRACE_DEBUG ("btm_ble_io_capabilities_req 6: IO_CAP:%d oob_data:%d auth_req:0x%02x",
                          p_data->io_cap, p_data->oob_data, p_data->auth_req);
    }
    return callback_rc;
}

/*******************************************************************************
 *
 * Function         btm_ble_br_keys_req
 *
 * Description      This function is called to handle SMP request for keys sent
 *                  over BR/EDR.
 *
 * Returns          void
 *
 ******************************************************************************/
uint8_t btm_ble_br_keys_req(tBTM_SEC_DEV_REC *p_dev_rec, tBTM_LE_IO_REQ *p_data)
{
    uint8_t         callback_rc = BTM_SUCCESS;
    BTM_TRACE_DEBUG ("%s", __func__);
    if (btm_cb.api.p_le_callback)
    {
        /* the callback function implementation may change the IO capability... */
        callback_rc = (*btm_cb.api.p_le_callback) (BTM_LE_IO_REQ_EVT, p_dev_rec->bd_addr,
                                                  (tBTM_LE_EVT_DATA *)p_data);
    }

    return callback_rc;
}

#if (BLE_PRIVACY_SPT == TRUE)
/*******************************************************************************
 *
 * Function         btm_ble_resolve_random_addr_on_conn_cmpl
 *
 * Description      resolve random address complete on connection complete event.
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_resolve_random_addr_on_conn_cmpl(void * p_rec, void *p_data)
{
    uint8_t *p = (uint8_t *)p_data;
    tBTM_SEC_DEV_REC    *match_rec = (tBTM_SEC_DEV_REC *) p_rec;
    uint8_t     role, bda_type;
    uint16_t    handle;
    BD_ADDR     bda;
    uint16_t    conn_interval, conn_latency, conn_timeout;
    bool        match = false;

    ++p;
    STREAM_TO_UINT16   (handle, p);
    STREAM_TO_UINT8    (role, p);
    STREAM_TO_UINT8    (bda_type, p);
    STREAM_TO_BDADDR   (bda, p);
    STREAM_TO_UINT16   (conn_interval, p);
    STREAM_TO_UINT16   (conn_latency, p);
    STREAM_TO_UINT16   (conn_timeout, p);

    handle = HCID_GET_HANDLE (handle);

    BTM_TRACE_EVENT ("%s", __func__);

    if (match_rec)
    {
        LOG_INFO(LOG_TAG, "%s matched and resolved random address", __func__);
        match = true;
        match_rec->ble.active_addr_type = BTM_BLE_ADDR_RRA;
        memcpy(match_rec->ble.cur_rand_addr, bda, BD_ADDR_LEN);
        if (!btm_ble_init_pseudo_addr (match_rec, bda))
        {
            /* assign the original address to be the current report address */
            memcpy(bda, match_rec->ble.pseudo_addr, BD_ADDR_LEN);
        }
        else
        {
            memcpy(bda, match_rec->bd_addr, BD_ADDR_LEN);
        }
    }
    else
    {
        LOG_INFO(LOG_TAG, "%s unable to match and resolve random address", __func__);
    }

    btm_ble_connected(bda, handle, HCI_ENCRYPT_MODE_DISABLED, role, bda_type, match);

    l2cble_conn_comp (handle, role, bda, bda_type, conn_interval,
                      conn_latency, conn_timeout);

    return;
}
#endif

/*******************************************************************************
 *
 * Function         btm_ble_connected
 *
 * Description      This function is when a LE connection to the peer device is
 *                  establsihed
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_connected (uint8_t *bda, uint16_t handle, uint8_t enc_mode, uint8_t role,
                        tBLE_ADDR_TYPE addr_type,
                        UNUSED_ATTR bool addr_matched)
{
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bda);
    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;

    BTM_TRACE_EVENT ("btm_ble_connected");

    /* Commenting out trace due to obf/compilation problems.
    */
    if (p_dev_rec)
    {
        BTM_TRACE_EVENT ("Security Manager: btm_ble_connected :  handle:%d  enc_mode:%d  bda:%x RName:%s",
                          handle,  enc_mode,
                          (bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5],
                          p_dev_rec->sec_bd_name);

        BTM_TRACE_DEBUG ("btm_ble_connected sec_flags=0x%x",p_dev_rec->sec_flags);
    }
    else
    {
        BTM_TRACE_EVENT ("Security Manager: btm_ble_connected:   handle:%d  enc_mode:%d  bda:%x ",
                          handle,  enc_mode,
                          (bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5]);
    }

    if (!p_dev_rec)
    {
        /* There is no device record for new connection.  Allocate one */
        p_dev_rec = btm_sec_alloc_dev(bda);
        if (p_dev_rec == NULL)
            return;
    }
    else    /* Update the timestamp for this device */
    {
        p_dev_rec->timestamp = btm_cb.dev_rec_count++;
    }

    /* update device information */
    p_dev_rec->device_type |= BT_DEVICE_TYPE_BLE;
    p_dev_rec->ble_hci_handle = handle;
    p_dev_rec->ble.ble_addr_type = addr_type;
    /* update pseudo address */
    memcpy(p_dev_rec->ble.pseudo_addr, bda, BD_ADDR_LEN);

    p_dev_rec->role_master = false;
    if (role == HCI_ROLE_MASTER)
        p_dev_rec->role_master = true;

#if (BLE_PRIVACY_SPT == TRUE)
    if (!addr_matched)
        p_dev_rec->ble.active_addr_type = BTM_BLE_ADDR_PSEUDO;

    if (p_dev_rec->ble.ble_addr_type == BLE_ADDR_RANDOM && !addr_matched)
        memcpy(p_dev_rec->ble.cur_rand_addr, bda, BD_ADDR_LEN);
#endif

    p_cb->inq_var.directed_conn = BTM_BLE_CONNECT_EVT;

    return;
}

/*****************************************************************************
 *  Function        btm_ble_conn_complete
 *
 *  Description     LE connection complete.
 *
 *****************************************************************************/
void btm_ble_conn_complete(uint8_t *p,
                           UNUSED_ATTR uint16_t evt_len, bool    enhanced)
{
#if (BLE_PRIVACY_SPT == TRUE)
    uint8_t     *p_data = p, peer_addr_type;
    BD_ADDR     local_rpa, peer_rpa;
#endif
    uint8_t     role, status, bda_type;
    uint16_t    handle;
    BD_ADDR     bda;
    uint16_t    conn_interval, conn_latency, conn_timeout;
    bool        match = false;

    STREAM_TO_UINT8   (status, p);
    STREAM_TO_UINT16   (handle, p);
    STREAM_TO_UINT8    (role, p);
    STREAM_TO_UINT8    (bda_type, p);
    STREAM_TO_BDADDR   (bda, p);

    if (status == 0)
    {
#if (BLE_PRIVACY_SPT == TRUE)
        peer_addr_type = bda_type;
        match = btm_identity_addr_to_random_pseudo (bda, &bda_type, true);

        if (enhanced)
        {
            STREAM_TO_BDADDR   (local_rpa, p);
            STREAM_TO_BDADDR   (peer_rpa, p);
        }

        /* possiblly receive connection complete with resolvable random while
           the device has been paired */
        if (!match && BTM_BLE_IS_RESOLVE_BDA(bda))
        {
            btm_ble_resolve_random_addr(bda, btm_ble_resolve_random_addr_on_conn_cmpl, p_data);
        }
        else
#endif
        {
            STREAM_TO_UINT16   (conn_interval, p);
            STREAM_TO_UINT16   (conn_latency, p);
            STREAM_TO_UINT16   (conn_timeout, p);
            handle = HCID_GET_HANDLE (handle);

            btm_ble_connected(bda, handle, HCI_ENCRYPT_MODE_DISABLED, role, bda_type, match);

            l2cble_conn_comp (handle, role, bda, bda_type, conn_interval,
                              conn_latency, conn_timeout);

#if (BLE_PRIVACY_SPT == TRUE)
            if (enhanced)
            {
                btm_ble_refresh_local_resolvable_private_addr(bda, local_rpa);

                if (peer_addr_type & BLE_ADDR_TYPE_ID_BIT)
                    btm_ble_refresh_peer_resolvable_private_addr(bda, peer_rpa, BLE_ADDR_RANDOM);
            }
#endif
        }
    }
    else
    {
        role = HCI_ROLE_UNKNOWN;
        if (status != HCI_ERR_DIRECTED_ADVERTISING_TIMEOUT)
        {
            btm_ble_set_conn_st(BLE_CONN_IDLE);
#if (BLE_PRIVACY_SPT == TRUE)
            btm_ble_disable_resolving_list(BTM_BLE_RL_INIT, true);
#endif
        }
        else
        {
#if (BLE_PRIVACY_SPT == TRUE)
            btm_cb.ble_ctr_cb.inq_var.adv_mode  = BTM_BLE_ADV_DISABLE;
            btm_ble_disable_resolving_list(BTM_BLE_RL_ADV, true);
#endif
        }
    }

    btm_ble_update_mode_operation(role, bda, status);
}

/*****************************************************************************
 * Function btm_ble_create_ll_conn_complete
 *
 * Description LE connection complete.
 *
 *****************************************************************************/
void btm_ble_create_ll_conn_complete (uint8_t status)
{
    if (status != HCI_SUCCESS)
    {
        btm_ble_set_conn_st(BLE_CONN_IDLE);
        btm_ble_update_mode_operation(HCI_ROLE_UNKNOWN, NULL, status);
    }
}
/*****************************************************************************
 *  Function        btm_proc_smp_cback
 *
 *  Description     This function is the SMP callback handler.
 *
 *****************************************************************************/
uint8_t btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data)
{
    tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_dev (bd_addr);
    uint8_t res = 0;

    BTM_TRACE_DEBUG ("btm_proc_smp_cback event = %d", event);

    if (p_dev_rec != NULL)
    {
        switch (event)
        {
            case SMP_IO_CAP_REQ_EVT:
                btm_ble_io_capabilities_req(p_dev_rec, (tBTM_LE_IO_REQ *)&p_data->io_req);
                break;

            case SMP_BR_KEYS_REQ_EVT:
                btm_ble_br_keys_req(p_dev_rec, (tBTM_LE_IO_REQ *)&p_data->io_req);
                break;

            case SMP_PASSKEY_REQ_EVT:
            case SMP_PASSKEY_NOTIF_EVT:
            case SMP_OOB_REQ_EVT:
            case SMP_NC_REQ_EVT:
            case SMP_SC_OOB_REQ_EVT:
                /* fall through */
                p_dev_rec->sec_flags |= BTM_SEC_LE_AUTHENTICATED;

            case SMP_SEC_REQUEST_EVT:
                if (event == SMP_SEC_REQUEST_EVT && btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
                {
                    BTM_TRACE_DEBUG("%s: Ignoring SMP Security request", __func__);
                    break;
                }
                memcpy (btm_cb.pairing_bda, bd_addr, BD_ADDR_LEN);
                p_dev_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING;
                btm_cb.pairing_flags |= BTM_PAIR_FLAGS_LE_ACTIVE;
                /* fall through */

            case SMP_COMPLT_EVT:
                if (btm_cb.api.p_le_callback)
                {
                    /* the callback function implementation may change the IO capability... */
                    BTM_TRACE_DEBUG ("btm_cb.api.p_le_callback=0x%x", btm_cb.api.p_le_callback );
                   (*btm_cb.api.p_le_callback) (event, bd_addr, (tBTM_LE_EVT_DATA *)p_data);
                }

                if (event == SMP_COMPLT_EVT)
                {
                    BTM_TRACE_DEBUG ("evt=SMP_COMPLT_EVT before update sec_level=0x%x sec_flags=0x%x", p_data->cmplt.sec_level , p_dev_rec->sec_flags );

                    res = (p_data->cmplt.reason == SMP_SUCCESS) ? BTM_SUCCESS : BTM_ERR_PROCESSING;

                    BTM_TRACE_DEBUG ("after update result=%d sec_level=0x%x sec_flags=0x%x",
                                      res, p_data->cmplt.sec_level , p_dev_rec->sec_flags );

                    if (p_data->cmplt.is_pair_cancel && btm_cb.api.p_bond_cancel_cmpl_callback )
                    {
                        BTM_TRACE_DEBUG ("Pairing Cancel completed");
                        (*btm_cb.api.p_bond_cancel_cmpl_callback)(BTM_SUCCESS);
                    }
#if (BTM_BLE_CONFORMANCE_TESTING == TRUE)
                    if (res != BTM_SUCCESS)
                    {
                        if (!btm_cb.devcb.no_disc_if_pair_fail && p_data->cmplt.reason != SMP_CONN_TOUT)
                        {
                            BTM_TRACE_DEBUG ("Pairing failed - prepare to remove ACL");
                            l2cu_start_post_bond_timer(p_dev_rec->ble_hci_handle);
                        }
                        else
                        {
                            BTM_TRACE_DEBUG ("Pairing failed - Not Removing ACL");
                            p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
                        }
                    }
#else
                    if (res != BTM_SUCCESS && p_data->cmplt.reason != SMP_CONN_TOUT)
                    {
                        BTM_TRACE_DEBUG ("Pairing failed - prepare to remove ACL");
                        l2cu_start_post_bond_timer(p_dev_rec->ble_hci_handle);
                    }
#endif

                    BTM_TRACE_DEBUG ("btm_cb pairing_state=%x pairing_flags=%x pin_code_len=%x",
                                      btm_cb.pairing_state,
                                      btm_cb.pairing_flags,
                                      btm_cb.pin_code_len  );
                    BTM_TRACE_DEBUG ("btm_cb.pairing_bda %02x:%02x:%02x:%02x:%02x:%02x",
                                      btm_cb.pairing_bda[0], btm_cb.pairing_bda[1], btm_cb.pairing_bda[2],
                                      btm_cb.pairing_bda[3], btm_cb.pairing_bda[4], btm_cb.pairing_bda[5]);

                    /* Reset btm state only if the callback address matches pairing address*/
                    if(memcmp(bd_addr, btm_cb.pairing_bda, BD_ADDR_LEN) == 0)
                    {
                        memset (btm_cb.pairing_bda, 0xff, BD_ADDR_LEN);
                        btm_cb.pairing_state = BTM_PAIR_STATE_IDLE;
                        btm_cb.pairing_flags = 0;
                    }

                    if (res == BTM_SUCCESS)
                    {
                        p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
#if (BLE_PRIVACY_SPT == TRUE)
                        /* add all bonded device into resolving list if IRK is available*/
                        btm_ble_resolving_list_load_dev(p_dev_rec);
#endif
                    }

                    btm_sec_dev_rec_cback_event(p_dev_rec, res, true);
                }
                break;

            default:
                BTM_TRACE_DEBUG ("unknown event = %d", event);
                break;

        }
    }
    else
    {
        BTM_TRACE_ERROR("btm_proc_smp_cback received for unknown device");
    }

    return 0;
}

/*******************************************************************************
 *
 * Function         BTM_BleDataSignature
 *
 * Description      This function is called to sign the data using AES128 CMAC
 *                  algorith.
 *
 * Parameter        bd_addr: target device the data to be signed for.
 *                  p_text: singing data
 *                  len: length of the data to be signed.
 *                  signature: output parameter where data signature is going to
 *                             be stored.
 *
 * Returns          true if signing sucessul, otherwise false.
 *
 ******************************************************************************/
bool    BTM_BleDataSignature (BD_ADDR bd_addr, uint8_t *p_text, uint16_t len,
                              BLE_SIGNATURE signature)
{
    tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bd_addr);

    BTM_TRACE_DEBUG ("%s", __func__);
    bool    ret = false;
    if (p_rec == NULL)
    {
        BTM_TRACE_ERROR("%s-data signing can not be done from unknown device", __func__);
    }
    else
    {
        uint8_t *p_mac = (uint8_t *)signature;
        uint8_t *pp;
        uint8_t *p_buf = (uint8_t *)osi_malloc(len + 4);

        BTM_TRACE_DEBUG("%s-Start to generate Local CSRK", __func__);
        pp = p_buf;
        /* prepare plain text */
        if (p_text) {
            memcpy(p_buf, p_text, len);
            pp = (p_buf + len);
        }

        UINT32_TO_STREAM(pp, p_rec->ble.keys.local_counter);
        UINT32_TO_STREAM(p_mac, p_rec->ble.keys.local_counter);

        ret = aes_cipher_msg_auth_code(p_rec->ble.keys.lcsrk, p_buf, (uint16_t)(len + 4), BTM_CMAC_TLEN_SIZE, p_mac);
        if (ret == true) {
            btm_ble_increment_sign_ctr(bd_addr, true);
        }

        BTM_TRACE_DEBUG("%s p_mac = %d", __func__, p_mac);
        BTM_TRACE_DEBUG("p_mac[0] = 0x%02x p_mac[1] = 0x%02x p_mac[2] = 0x%02x p_mac[3] = 0x%02x",
                        *p_mac, *(p_mac + 1), *(p_mac + 2), *(p_mac + 3));
        BTM_TRACE_DEBUG("p_mac[4] = 0x%02x p_mac[5] = 0x%02x p_mac[6] = 0x%02x p_mac[7] = 0x%02x",
                        *(p_mac + 4), *(p_mac + 5), *(p_mac + 6), *(p_mac + 7));
        osi_free(p_buf);
    }
    return ret;
}

/*******************************************************************************
 *
 * Function         BTM_BleVerifySignature
 *
 * Description      This function is called to verify the data signature
 *
 * Parameter        bd_addr: target device the data to be signed for.
 *                  p_orig:  original data before signature.
 *                  len: length of the signing data
 *                  counter: counter used when doing data signing
 *                  p_comp: signature to be compared against.

 * Returns          true if signature verified correctly; otherwise false.
 *
 ******************************************************************************/
bool    BTM_BleVerifySignature (BD_ADDR bd_addr, uint8_t *p_orig, uint16_t len, uint32_t counter,
                                uint8_t *p_comp)
{
    bool    verified = false;
    tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bd_addr);
    uint8_t p_mac[BTM_CMAC_TLEN_SIZE];

    if (p_rec == NULL || (p_rec && !(p_rec->ble.key_type & BTM_LE_KEY_PCSRK)))
    {
        BTM_TRACE_ERROR("can not verify signature for unknown device");
    }
    else if (counter < p_rec->ble.keys.counter)
    {
        BTM_TRACE_ERROR("signature received with out dated sign counter");
    }
    else if (p_orig == NULL)
    {
        BTM_TRACE_ERROR("No signature to verify");
    }
    else
    {
        BTM_TRACE_DEBUG ("%s rcv_cnt=%d >= expected_cnt=%d", __func__, counter,
                          p_rec->ble.keys.counter);

        if (aes_cipher_msg_auth_code(p_rec->ble.keys.pcsrk, p_orig, len, BTM_CMAC_TLEN_SIZE, p_mac))
        {
            if (memcmp(p_mac, p_comp, BTM_CMAC_TLEN_SIZE) == 0)
            {
                btm_ble_increment_sign_ctr(bd_addr, false);
                verified = true;
            }
        }
    }
    return verified;
}

/*******************************************************************************
 *
 * Function         BTM_GetLeSecurityState
 *
 * Description      This function is called to get security mode 1 flags and
 *                  encryption key size for LE peer.
 *
 * Returns          bool    true if LE device is found, false otherwise.
 *
 ******************************************************************************/
bool    BTM_GetLeSecurityState (BD_ADDR bd_addr, uint8_t *p_le_dev_sec_flags, uint8_t *p_le_key_size)
{
    tBTM_SEC_DEV_REC *p_dev_rec;
    uint16_t dev_rec_sec_flags;

    *p_le_dev_sec_flags = 0;
    *p_le_key_size = 0;

    p_dev_rec = btm_find_dev(bd_addr);
    if (p_dev_rec == NULL)
    {
        BTM_TRACE_ERROR ("%s fails", __func__);
        return (false);
    }

    if (p_dev_rec->ble_hci_handle == BTM_SEC_INVALID_HANDLE) {
        BTM_TRACE_ERROR ("%s-this is not LE device", __func__);
        return (false);
    }

    dev_rec_sec_flags = p_dev_rec->sec_flags;

    if (dev_rec_sec_flags & BTM_SEC_LE_ENCRYPTED)
    {
        /* link is encrypted with LTK or STK */
        *p_le_key_size = p_dev_rec->enc_key_size;
        *p_le_dev_sec_flags |= BTM_SEC_LE_LINK_ENCRYPTED;

        *p_le_dev_sec_flags |= (dev_rec_sec_flags & BTM_SEC_LE_AUTHENTICATED)
            ? BTM_SEC_LE_LINK_PAIRED_WITH_MITM      /* set auth LTK flag */
            : BTM_SEC_LE_LINK_PAIRED_WITHOUT_MITM;  /* set unauth LTK flag */
    }
    else if (p_dev_rec->ble.key_type & BTM_LE_KEY_PENC)
    {
        /* link is unencrypted, still LTK is available */
        *p_le_key_size = p_dev_rec->ble.keys.key_size;

        *p_le_dev_sec_flags |= (dev_rec_sec_flags & BTM_SEC_LE_LINK_KEY_AUTHED)
            ? BTM_SEC_LE_LINK_PAIRED_WITH_MITM      /* set auth LTK flag */
            : BTM_SEC_LE_LINK_PAIRED_WITHOUT_MITM;  /* set unauth LTK flag */
    }

    BTM_TRACE_DEBUG ("%s - le_dev_sec_flags: 0x%02x, le_key_size: %d",
        __func__, *p_le_dev_sec_flags, *p_le_key_size);

    return true;
}

/*******************************************************************************
 *
 * Function         BTM_BleSecurityProcedureIsRunning
 *
 * Description      This function indicates if LE security procedure is
 *                  currently running with the peer.
 *
 * Returns          bool    true if security procedure is running, false otherwise.
 *
 ******************************************************************************/
bool    BTM_BleSecurityProcedureIsRunning(BD_ADDR bd_addr)
{
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);

    if (p_dev_rec == NULL)
    {
        BTM_TRACE_ERROR ("%s device with BDA: %08x%04x is not found",
                          __func__, (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
                          (bd_addr[4]<<8)+bd_addr[5]);
        return false;
    }

    return (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING ||
            p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING);
}

/*******************************************************************************
 *
 * Function         BTM_BleGetSupportedKeySize
 *
 * Description      This function gets the maximum encryption key size in bytes
 *                  the local device can suport.
 *                  record.
 *
 * Returns          the key size or 0 if the size can't be retrieved.
 *
 ******************************************************************************/
extern uint8_t BTM_BleGetSupportedKeySize (BD_ADDR bd_addr)
{
#if (L2CAP_LE_COC_INCLUDED == TRUE)
    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
    tBTM_LE_IO_REQ dev_io_cfg;
    uint8_t callback_rc;

    if (!p_dev_rec)
    {
        BTM_TRACE_ERROR ("%s device with BDA: %08x%04x is not found",
                         __func__,(bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
                          (bd_addr[4]<<8)+bd_addr[5]);
        return 0;
    }

    if (btm_cb.api.p_le_callback == NULL)
    {
        BTM_TRACE_ERROR ("%s can't access supported key size",__func__);
        return 0;
    }

    callback_rc = (*btm_cb.api.p_le_callback) (BTM_LE_IO_REQ_EVT, p_dev_rec->bd_addr,
                                               (tBTM_LE_EVT_DATA *) &dev_io_cfg);

    if (callback_rc != BTM_SUCCESS)
    {
        BTM_TRACE_ERROR ("%s can't access supported key size",__func__);
        return 0;
    }

    BTM_TRACE_DEBUG ("%s device supports key size = %d", __func__, dev_io_cfg.max_key_size);
    return (dev_io_cfg.max_key_size);
#else
    return 0;
#endif
}

/*******************************************************************************
 *  Utility functions for LE device IR/ER generation
 ******************************************************************************/
/*******************************************************************************
 *
 * Function         btm_notify_new_key
 *
 * Description      This function is to notify application new keys have been
 *                  generated.
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_notify_new_key(uint8_t key_type)
{
    tBTM_BLE_LOCAL_KEYS *p_locak_keys = NULL;

    BTM_TRACE_DEBUG ("btm_notify_new_key key_type=%d", key_type);

    if (btm_cb.api.p_le_key_callback)
    {
        switch (key_type)
        {
            case BTM_BLE_KEY_TYPE_ID:
                BTM_TRACE_DEBUG ("BTM_BLE_KEY_TYPE_ID");
                p_locak_keys = (tBTM_BLE_LOCAL_KEYS *)&btm_cb.devcb.id_keys;
                break;

            case BTM_BLE_KEY_TYPE_ER:
                BTM_TRACE_DEBUG ("BTM_BLE_KEY_TYPE_ER");
                p_locak_keys = (tBTM_BLE_LOCAL_KEYS *)&btm_cb.devcb.ble_encryption_key_value;
                break;

            default:
                BTM_TRACE_ERROR("unknown key type: %d", key_type);
                break;
        }
        if (p_locak_keys != NULL)
            (*btm_cb.api.p_le_key_callback) (key_type, p_locak_keys);
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_process_er2
 *
 * Description      This function is called when ER is generated, store it in
 *                  local control block.
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_process_er2(tBTM_RAND_ENC *p)
{
    BTM_TRACE_DEBUG ("btm_ble_process_er2");

    if (p &&p->opcode == HCI_BLE_RAND)
    {
        memcpy(&btm_cb.devcb.ble_encryption_key_value[8], p->param_buf, BT_OCTET8_LEN);
        btm_notify_new_key(BTM_BLE_KEY_TYPE_ER);
    }
    else
    {
        BTM_TRACE_ERROR("Generating ER2 exception.");
        memset(&btm_cb.devcb.ble_encryption_key_value, 0, sizeof(BT_OCTET16));
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_process_er
 *
 * Description      This function is called when ER is generated, store it in
 *                  local control block.
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_process_er(tBTM_RAND_ENC *p)
{
    BTM_TRACE_DEBUG ("btm_ble_process_er");

    if (p &&p->opcode == HCI_BLE_RAND)
    {
        memcpy(&btm_cb.devcb.ble_encryption_key_value[0], p->param_buf, BT_OCTET8_LEN);

        btsnd_hcic_ble_rand((void *)btm_ble_process_er2);
    }
    else
    {
        BTM_TRACE_ERROR("Generating ER1 exception.");
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_process_irk
 *
 * Description      This function is called when IRK is generated, store it in
 *                  local control block.
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_process_irk(tSMP_ENC *p)
{
    BTM_TRACE_DEBUG ("btm_ble_process_irk");
    if (p &&p->opcode == HCI_BLE_ENCRYPT)
    {
        memcpy(btm_cb.devcb.id_keys.irk, p->param_buf, BT_OCTET16_LEN);
        btm_notify_new_key(BTM_BLE_KEY_TYPE_ID);

#if (BLE_PRIVACY_SPT == TRUE)
        /* if privacy is enabled, new RPA should be calculated */
        if (btm_cb.ble_ctr_cb.privacy_mode != BTM_PRIVACY_NONE)
        {
            btm_gen_resolvable_private_addr((void *)btm_gen_resolve_paddr_low);
        }
#endif
    }
    else
    {
        BTM_TRACE_ERROR("Generating IRK exception.");
    }

    /* proceed generate ER */
    btsnd_hcic_ble_rand((void *)btm_ble_process_er);
}

/*******************************************************************************
 *
 * Function         btm_ble_process_dhk
 *
 * Description      This function is called when DHK is calculated, store it in
 *                  local control block, and proceed to generate ER, a 128-bits
 *                  random number.
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_process_dhk(tSMP_ENC *p)
{
    uint8_t btm_ble_irk_pt = 0x01;
    tSMP_ENC output;

    BTM_TRACE_DEBUG ("btm_ble_process_dhk");

    if (p && p->opcode == HCI_BLE_ENCRYPT)
    {
        memcpy(btm_cb.devcb.id_keys.dhk, p->param_buf, BT_OCTET16_LEN);
        BTM_TRACE_DEBUG("BLE DHK generated.");

        /* IRK = D1(IR, 1) */
        if (!SMP_Encrypt(btm_cb.devcb.id_keys.ir, BT_OCTET16_LEN, &btm_ble_irk_pt,
                         1,   &output))
        {
            /* reset all identity root related key */
            memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
        }
        else
        {
            btm_ble_process_irk(&output);
        }
    }
    else
    {
        /* reset all identity root related key */
        memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_process_ir2
 *
 * Description      This function is called when IR is generated, proceed to calculate
 *                  DHK = Eir({0x03, 0, 0 ...})
 *
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_process_ir2(tBTM_RAND_ENC *p)
{
    uint8_t btm_ble_dhk_pt = 0x03;
    tSMP_ENC output;

    BTM_TRACE_DEBUG ("btm_ble_process_ir2");

    if (p && p->opcode == HCI_BLE_RAND)
    {
        /* remembering in control block */
        memcpy(&btm_cb.devcb.id_keys.ir[8], p->param_buf, BT_OCTET8_LEN);
        /* generate DHK= Eir({0x03, 0x00, 0x00 ...}) */

        SMP_Encrypt(btm_cb.devcb.id_keys.ir, BT_OCTET16_LEN, &btm_ble_dhk_pt,
                    1, &output);
        btm_ble_process_dhk(&output);

        BTM_TRACE_DEBUG("BLE IR generated.");
    }
    else
    {
        memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_process_ir
 *
 * Description      This function is called when IR is generated, proceed to calculate
 *                  DHK = Eir({0x02, 0, 0 ...})
 *
 *
 * Returns          void
 *
 ******************************************************************************/
static void btm_ble_process_ir(tBTM_RAND_ENC *p)
{
    BTM_TRACE_DEBUG ("btm_ble_process_ir");

    if (p && p->opcode == HCI_BLE_RAND)
    {
        /* remembering in control block */
        memcpy(btm_cb.devcb.id_keys.ir, p->param_buf, BT_OCTET8_LEN);

        btsnd_hcic_ble_rand((void *)btm_ble_process_ir2);
    }
}

/*******************************************************************************
 *
 * Function         btm_ble_reset_id
 *
 * Description      This function is called to reset LE device identity.
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_reset_id( void )
{
    BTM_TRACE_DEBUG ("btm_ble_reset_id");

    /* regenrate Identity Root*/
    btsnd_hcic_ble_rand((void *)btm_ble_process_ir);
}

    #if BTM_BLE_CONFORMANCE_TESTING == true
/*******************************************************************************
 *
 * Function         btm_ble_set_no_disc_if_pair_fail
 *
 * Description      This function indicates that whether no disconnect of the ACL
 *                  should be used if pairing failed
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_set_no_disc_if_pair_fail(bool    disable_disc )
{
    BTM_TRACE_DEBUG ("btm_ble_set_disc_enable_if_pair_fail disable_disc=%d", disable_disc);
    btm_cb.devcb.no_disc_if_pair_fail = disable_disc;
}

/*******************************************************************************
 *
 * Function         btm_ble_set_test_mac_value
 *
 * Description      This function set test MAC value
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_set_test_mac_value(bool    enable, uint8_t *p_test_mac_val )
{
    BTM_TRACE_DEBUG ("btm_ble_set_test_mac_value enable=%d", enable);
    btm_cb.devcb.enable_test_mac_val = enable;
    memcpy(btm_cb.devcb.test_mac, p_test_mac_val, BT_OCTET8_LEN);
}

/*******************************************************************************
 *
 * Function         btm_ble_set_test_local_sign_cntr_value
 *
 * Description      This function set test local sign counter value
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_set_test_local_sign_cntr_value(bool    enable, uint32_t test_local_sign_cntr )
{
    BTM_TRACE_DEBUG ("btm_ble_set_test_local_sign_cntr_value enable=%d local_sign_cntr=%d",
                      enable, test_local_sign_cntr);
    btm_cb.devcb.enable_test_local_sign_cntr = enable;
    btm_cb.devcb.test_local_sign_cntr =  test_local_sign_cntr;
}

/*******************************************************************************
 *
 * Function         btm_set_random_address
 *
 * Description      This function set a random address to local controller.
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_set_random_address(BD_ADDR random_bda)
{
    tBTM_LE_RANDOM_CB *p_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
    bool        adv_mode = btm_cb.ble_ctr_cb.inq_var.adv_mode ;

    BTM_TRACE_DEBUG ("btm_set_random_address");

    if (adv_mode  == BTM_BLE_ADV_ENABLE)
        btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE);

    memcpy(p_cb->private_addr, random_bda, BD_ADDR_LEN);
    btsnd_hcic_ble_set_random_addr(p_cb->private_addr);

    if (adv_mode  == BTM_BLE_ADV_ENABLE)
        btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_ENABLE);

}

/*******************************************************************************
 *
 * Function         btm_ble_set_keep_rfu_in_auth_req
 *
 * Description      This function indicates if RFU bits have to be kept as is
 *                  (by default they have to be set to 0 by the sender).
 *
 * Returns          void
 *
 ******************************************************************************/
void btm_ble_set_keep_rfu_in_auth_req(bool    keep_rfu)
{
    BTM_TRACE_DEBUG ("btm_ble_set_keep_rfu_in_auth_req keep_rfus=%d", keep_rfu);
    btm_cb.devcb.keep_rfu_in_auth_req = keep_rfu;
}

#endif /* BTM_BLE_CONFORMANCE_TESTING */