| fc87af74af7f856bb8e7585308fb1fdaaa69ec73 |
|
27-May-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
infiniband: Fix up users implicitly relying on getting stat.h
They get it via module.h (via device.h) but we want to clean that up.
When we do, we'll get things like:
CC [M] drivers/infiniband/core/sysfs.o
sysfs.c:361: error: 'S_IRUGO' undeclared here (not in a function)
sysfs.c:654: error: 'S_IWUSR' undeclared here (not in a function)
so add in the stat header it is using explicitly in advance.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
| 2a543904ddcb463db9d56d1efcb2f80884ea55f3 |
|
26-Oct-2010 |
Nicolas Kaiser <nikai@nikai.net> |
IB/ipath: Don't reset disabled devices
The comment some lines above states that disabled devices must not reset.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
|
| a4dbd6740df0872cdf0a86841f75beec8381964d |
|
24-Jun-2009 |
David Brownell <dbrownell@users.sourceforge.net> |
driver model: constify attribute groups
Let attribute group vectors be declared "const". We'd
like to let most attribute metadata live in read-only
sections... this is a start.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| e7eacd36865ae0707f5efae8e4dda421ffcd1b66 |
|
17-Apr-2008 |
Ralph Campbell <ralph.campbell@qlogic.com> |
IB/ipath: Update copyright dates for files changed in 2008
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| bb9171448deb1f7ece27674e2e431e4f267fd453 |
|
17-Apr-2008 |
Arthur Jones <arthur.jones@qlogic.com> |
IB/ipath: Misc changes to prepare for IB7220 introduction
The patch adds a number of minor changes to support newer HCAs:
- New send buffer control bits
- New error condition bits
- Locking and initialization changes
- More send buffers
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| d84e0b28d3a0b41fc574ea50d60522ae0fba75f4 |
|
17-Apr-2008 |
Michael Albaugh <Michael.Albaugh@qlogic.com> |
IB/ipath: EEPROM support for 7220 devices, robustness improvements, cleanup
Add support for reading newer card's EEPROMs while continuing to support
older EEPROMs.
Also, add support for the temperature sensor if present.
Signed-off-by: Michael Albaugh <Michael.Albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 6ca2abf4c02fb3e35247a985c2b6f5834e995033 |
|
17-Apr-2008 |
Arthur Jones <arthur.jones@qlogic.com> |
IB/ipath: Provide I/O bus speeds for diagnostic purposes
Modern I/O buses like PCIe and HT can be configured for multiple speeds
and widths. When an ipath HCA seems to have lower than expected
performance, it is very useful to be able to display what the driver
thinks the bus speed is.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 359193ef433061515fe24d57e5bd5a1318d71bc3 |
|
08-Jan-2008 |
Michael Albaugh <michael.albaugh@qlogic.com> |
IB/ipath: New sysfs entries to control 7220 features
IBA7220 includes many more configurable IB settings. Getting/setting
these is now grouped into a pair of chip specific functions accessed via
function pointers. Provide sysfs access to these settings.
Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 657c2f2cbccbac88689ac5174fc13dd3f9aece34 |
|
25-Jan-2008 |
Roland Dreier <rolandd@cisco.com> |
IB/ipath: Fix crash on unload introduced by sysfs changes
Commit 23b9c1ab ("Infiniband: make ipath driver use default driver
groups.") introduced a bug in the ipath driver where
ipath_device_create_group() fell through into the error path, even on
success, which meant that the sysfs groups it created would always get
removed right away. This made ipath_device_remove_group() hit the
BUG_ON() in sysfs_remove_group() when it tried to remove those groups a
second time.
Correct the return path so that the groups stick around until they are
supposed to be cleaned up.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 23b9c1ab5baf368a32b7242bf110ef1f48700d04 |
|
05-Dec-2007 |
Greg Kroah-Hartman <gregkh@suse.de> |
Infiniband: make ipath driver use default driver groups.
Make the ipath driver use the new driver functions so that it does not
touch the sysfs portion of the driver structure.
We also remove the redundant symlink from the device back to the driver,
as it is already in the sysfs tree. Any userspace tools should be using
the standard symlink, not some driver specific one.
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Arthur Jones <arthur.jones@qlogic.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 15cba26f42c13ca30cbb4388f132ac0ddf4df538 |
|
13-Sep-2007 |
Ralph Campbell <ralph.campbell@qlogic.com> |
IB/ipath: Add ability to set the LMC via the sysfs debugging interface
This patch adds the ability to set the LMC via a sysfs file as if the SM
sent a SubnSet(PortInfo) MAD. It is useful for debugging when no SM is
running.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 87427da55bc03dbce7906a5b09ed50279d654d28 |
|
11-Jun-2007 |
John Gregor <john.gregor@qlogic.com> |
IB/ipath: Update copyright dates
Now that it's June, it's about time to update
the copyright notices of files that have changed.
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| aecd3b5ab19624ca9644b9df9c61615282d8923f |
|
17-May-2007 |
Michael Albaugh <michael.albaugh@qlogic.com> |
IB/ipath: Log "active" time and some errors to EEPROM
We currently track various errors, now we enhance that capability by
logging some of them to EEPROM. We also now log a cumulative "active"
time defined by traffic though the InfiniPath HCA beyond the normal SM
traffic.
Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 82466f00ec6ef0a5ca7ea8991c731af2ec561c7d |
|
17-May-2007 |
Michael Albaugh <michael.albaugh@qlogic.com> |
IB/ipath: Support blinking LEDs with an led_override file
When we want to find an InfiniPath HCA in a rack of nodes, it is often
expeditious to blink the status LEDs via a userspace /sys file.
A write-only led_override "file" is published per device. Writes to
this file are interpreted as (string form) numbers, and the resulting
value sent to ipath_set_led_override(). The upper eight bits are
interpretted as a 4.4 fixed-point "frequency in Hertz", and the bottom
two 4-bit values are alternately (D0..3, then D4..7) used by the
board-specific LED-setting function to override the normal state.
Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 6473d160b4aba8023bcf38519a5989694dfd51a7 |
|
06-Mar-2007 |
Jean Delvare <khali@linux-fr.org> |
PCI: Cleanup the includes of <linux/pci.h>
I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.
In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.
My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:
arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c
I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.
Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
[PATCH] scatterlist.h needs types.h
http://lkml.org/lkml/2007/3/01/141
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 44f8e3f3f7d8e61b4aafced278403955fe18ad88 |
|
12-Dec-2006 |
Roland Dreier <rolandd@cisco.com> |
IB/ipath: Remove unused "write-only" variables
Remove variables that are set but then never looked at in the ipath
driver. These cleanups came from David Binderman's list of "set but
never used" warnings from icc.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 11b054fe1d453954449a86de178bb98274bb86ef |
|
28-Sep-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: Clean up handling of GUID 0
Respond with an error to the SM if our GUID is 0, and don't allow the
user to set our GUID to 0.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 9929b0fb0f35f54371e9364bab809bcd753f9d3a |
|
28-Sep-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: Driver support for userspace sharing of HW contexts
This allows multiple userspace processes to share a single hardware
context in a master/slave arrangement. It is backwards binary compatible
with existing userspace.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 30fc5c3130bdbc7cc051a2d6054ad38360d408a8 |
|
25-Aug-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: control receive polarity inversion
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 0fd41363e0785247b7c19127318abc8b5eacc86b |
|
25-Aug-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: remove stale references to userspace SMA
When we first submitted a userspace subnet management agent, it was
rejected, so we left it out of the final driver submission. This patch
removes a number of vestigial references to it.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| b55f4f06c834a67f949a5219c5f97ffafa240989 |
|
25-Aug-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: simplify debugging code after ipath_core and ib_ipath merger
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 34b2aafea38efdf02cd8107a6e1057e2a297c447 |
|
25-Aug-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: simplify layering code
A lot of ipath layer code was only called in one place. Now that the
ipath_core and ib_ipath drivers are merged, it's more sensible to simply
inline the simple stuff that the layer code was doing.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 27b678dd04a636f2c351816f4b3042c8815d4e9d |
|
01-Jul-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
[PATCH] IB/ipath: namespace cleanup: replace ips with ipath
Remove ips namespace from infinipath drivers. This renames ips_common.h to
ipath_common.h. Definitions, data structures, etc. that were not used by
kernel modules have moved to user-only headers. All names including ips have
been renamed to ipath. Some names have had an ipath prefix added.
Signed-off-by: Christian Bell <christian.bell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 46bbeac922906559ec46454cbc76caf03bc57353 |
|
01-Jul-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
[PATCH] IB/ipath: drop the "stats" sysfs attribute group
This attribute group made it into the original driver, but should not have.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 1eb68b990aab4c007e520acae39c74d8116693bc |
|
01-Jul-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
[PATCH] IB/ipath: purge sps_lid and sps_mlid arrays
The two arrays only had space for 4 units.
Also changed from ipath_set_sps_lid() to ipath_set_lid(); the sps was
leftover.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 85322947d761d08bd84165500f35b93c702aaaf3 |
|
01-Jul-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
[PATCH] IB/ipath: check for valid LID and multicast LIDs
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 759d57686dab8169ca68bbf938ce8e965d1e107a |
|
01-Jul-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
[PATCH] IB/ipath: update copyrights and other strings to reflect new company name
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 755e4ca4a9885b79a14169ab5b615920eb38a32a |
|
24-Apr-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: fix race with exposing reset file
We were accidentally exposing the "reset" sysfs file more than once
per device.
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| 3e9b4a5eb4ae4936feeea256c0105e078c7702cd |
|
30-Mar-2006 |
Bryan O'Sullivan <bos@pathscale.com> |
IB/ipath: sysfs and ipathfs support for core driver
The ipathfs filesystem contains files that are not appropriate for
sysfs, because they contain binary data. The hierarchy is simple; the
top-level directory contains driver-wide attribute files, while numbered
subdirectories contain per-device attribute files.
Our userspace code currently expects this filesystem to be mounted on
/ipathfs, but a final location has not yet been chosen.
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|