| 6a09ae95ed248d6d946407bb1f955e5f2624663d |
|
14-Aug-2013 |
Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de> |
ath5k: set 5/10 MHz supported channels and fix duration
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4ee73f338a528f44fd90496adfbfd9c119401850 |
|
11-Apr-2012 |
Michal Kazior <michal.kazior@tieto.com> |
mac80211: remove hw.conf.channel usage where possible
Removes hw.conf.channel usage from the following functions:
* ieee80211_mandatory_rates
* ieee80211_sta_get_rates
* ieee80211_frame_duration
* ieee80211_rts_duration
* ieee80211_ctstoself_duration
This is in preparation for multi-channel operation.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| c47faa364cfb249d5d7670fb7293a6f9acd8aa9e |
|
25-Nov-2011 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: Cleanups v2 + add kerneldoc on all hw functions
No functional changes
Add kernel doc for all ath5k_hw_* functions and strcucts. Also do some cleanup,
rename ath5k_hw_init_beacon to ath5k_hw_init_beacon_timers, remove an unused
variable from ath5k_hw_pcu_init and a few obsolete macros, mostly related to XR.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 931be260ed54843edac37cb3ff09a40b86114b31 |
|
27-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath5k: clean up base.h and its use
Remove unnecessary includes from base.h. Add includes to other files as
necessary. Don't include base.h unless needed.
Move declarations for functions in base.c from ath5k.h to base.h.
Use a better named define to protect base.h against double inclusion.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 32c254645f90a5a5486788c0deb30531fdb609c2 |
|
23-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath5k: eliminate CHANNEL_* macros, use AR5K_MODE_* in channel->hw_value
When checking for the band, use channel->band.
Change ath5k_hw_nic_wakeup() and ath5k_channel_ok() to take
ieee80211_channel. Change ath5k_hw_radio_revision() to take
ieee80211_band.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| e0d687bd9df218ba3d97aac15919d30816d72dcb |
|
15-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath5k: merge ath5k_hw and ath5k_softc
Both ath5k_hw and ath5k_softc represent one instance of the hardware.
This duplication is historical and is not needed anymore.
Keep the name "ath5k_hw" for the merged structure and "ah" for the
variable pointing to it. "ath5k_hw" is shorter than "ath5k_softc", more
descriptive and more widely used.
Put the combined structure to ath5k.h where the old ath5k_softc used to
be. Move some code from base.h to ath5k.h as needed.
Remove memory allocation for struct ath5k_hw and the corresponding error
handling. Merge iobase and ah_iobase fields.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 6a2a0e738225fc9ec063f84b79f0adf5c0ed176c |
|
09-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath5k: fix typos, bad comment formatting and GHz in place of MHz
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| e4bbf2f541501dcde47ce687ffc6d238bd2f7813 |
|
08-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath5k: fix formatting errors found by checkpatch.pl
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| fdd55d14b7d3a721e60fdc8be12ec0beb9cda8c6 |
|
08-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath5k: remove unneeded parentheses after return
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| b1ad1b6febb7772583c98d9a879fbbdb82a726a7 |
|
09-Apr-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath5k: fix slot time handling
Set the slot time based on the mac80211 short slot vs long slot setting
instead of just forcing long slot for all CCK-enabled channels.
This slightly improves 802.11g mode performance in in my tests.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| a27049e2c926bcf68360532a5ae66e408296ae85 |
|
09-Apr-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath5k: fix short preamble rate duration value
Subtract the difference in preamble duration (in usec) from the value
returned by ieee80211_generic_frame_duration.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 25985edcedea6396277003854657b5f3cb31a628 |
|
31-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
| c9234a662e38309d6fe272ad80e6cdb8d24654f0 |
|
25-Jan-2011 |
Bob Copeland <me@bobcopeland.com> |
ath5k: correct endianness of frame duration
The ath5k version of ieee80211_generic_frame_duration() returns
an __le16 for standard modes but a cpu-endian int for turbo/half/
quarter rates. Make it always return cpu-endian values.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 71ba1c30851575b43ba76b0f9c26ff5567e8136c |
|
23-Nov-2010 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: Always set IFS intervals on reset
* Make sure we always set IFS timings even if no
coverage class is set. If we don't we'll miss the
needed changes for different bwmodes.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| eeb8832b3181d6ca8593051b68c466e5d2653bb3 |
|
23-Nov-2010 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: Set all IFS intervals, not just slot time
* Replace set_slot_time with set_ifs_intervals that also sets
the various inter-frame space intervals based on current bwmode.
* Clean up AR5210 mess from reset_tx_queue, AR5210 only has one
data queue and we set IFS intervals for that queue on set_ifs_intervals
so there is nothing left to do for 5210 on reset_tx_queue.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 61cde037234c4b8e6497a23f5f236c64cbf9d41d |
|
23-Nov-2010 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: Extend rate_duration
* Extend ieee80211_generic_frame_duration to support the various
bwmodes.
* Better document what's going on with ack bitrates and update
write_rate_duration to support the standard ack bitrates (when
we don't set the high bit).
* Get rid of set_ack_bitrate_high and introduce a flag on ath5k_hw
for this (we only called the function on init anyway so there is no
difference).
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 3017fcab416d8d1ee48ca16aa9a3062f600dab8e |
|
23-Nov-2010 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: Extend get_default_sifs/slot_time
* Extend get_default_sifs/slot_time to include timings for turbo
half and quarter rate modes.
* AR5210 code for now uses timings already on core clock units
instead of usecs so rename them (we 'll clean it up later).
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9320b5c4a7260d9593102f378201d17e3f030739 |
|
23-Nov-2010 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: Reset cleanup and generic cleanup
* No functional changes
* Clean up reset:
Introduce init functions for each unit and call them instead
of having everything inside ath5k_hw_reset (it's just c/p for
now so nothing changes except calling order -I tested it with
various cards and it's ok-)
* Further cleanups:
ofdm_timings belongs to phy.c
rate_duration belongs to pcu.c
clock functions are general and belong to reset.c (more to follow)
* Reorder functions for better organization:
We start with helpers and other functions follow in categories,
init functions are last
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 9d119f3ebd074bde0b801f476a44ca60d222efb2 |
|
08-Oct-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath5k: store the clock rate in common data on channel changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 28df897a42aa41d6318be5b9872c4bb5c8d8d7e3 |
|
26-Sep-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: Disable interrupts in ath5k_hw_get_tsf64
The code in ath5k_hw_get_tsf64() is time critical and will return wrong results
if we get interrupted, so disable local interrupts.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 7f896126017830b29cf501d246ee32b81e359acd |
|
26-Sep-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: Check and fix ATIM window
This patch adds sanity-checks for the beacon timers and especially the ATIM
window to ath5k. It is basically the same what i did for madwifi two years ago
and fixes a problem in IBSS mode which has been described as "ramping" pings.
See the code comments for a more detailed description and these links:
http://madwifi-project.org/ticket/1154
http://madwifi-project.org/changeset/3867
http://thread.gmane.org/gmane.linux.drivers.madwifi.devel/6066
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 4a79f2c517cce31c3b25aab0ec5078368b22c363 |
|
26-Sep-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: Remove unused variable for atim window
It's not used and it's unlikely we will ever implement ATIM.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| d8878f83cf1cc0061e8b3bcf7dbd589410a51039 |
|
08-Sep-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: Remove old ath5k key handling functions
Remove the old ath5k key handling functions, since we now use the key
management in ath common.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 8801df86d79b1ffda94e3b937bc19bbe9a66557d |
|
21-Aug-2010 |
Bob Copeland <me@bobcopeland.com> |
ath5k: trivial spelling fixes
Fix some comments:
s/transmition/transmission/
s/puting/putting/
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 418de6d955fa1da0cb4332661a31d21f57e954ab |
|
15-Aug-2010 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: rename ath5k_hw_set_associd to _set_bssid
Although the named function also sets the aid, its main
purpose is configuring the bssid and we use that
everywhere else.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 97359d1235eaf634fe706c9faa6e40181cc95fb8 |
|
10-Aug-2010 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: use cipher suite selectors
Currently, mac80211 translates the cfg80211
cipher suite selectors into ALG_* values.
That isn't all too useful, and some drivers
benefit from the distinction between WEP40
and WEP104 as well. Therefore, convert it
all to use the cipher suite selectors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 230fc4f3b2fa72980787a5f86c850f02bb193187 |
|
19-May-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: remove ATH_TRACE macro
Now that we have ftrace, it is not needed any more.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 1c0fc65e6de4e941ff483df445e721d6edb1f84b |
|
16-Apr-2010 |
Benoit Papillault <benoit.papillault@free.fr> |
ath5k/ath9k: Fix 64 bits TSF reads
According to tests, both TSF lower and upper registers kept counting, so
the higher part could have been updated after the lower part has been
read, as shown in the following log where the upper part is read first
and the lower part next.
tsf = {00000003-fffffffd}
tsf = {00000003-00000001}
tsf = {00000004-0000000b}
This patch corrects this by checking that the upper part has not been
changed while the lower part was read. It has been tested in an IBSS
network where artifical IBSS merges have been done in order to trigger
hundreds of rollover for the TSF lower part.
It follows the logic mentionned by Derek, with only 2 register reads
needed at each additional steps instead of 3 (the minimum number of
register reads is still 3).
Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 0edc9a6709d8e7d4f26c7f2a4b5ebdb641f8dfa0 |
|
12-Apr-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: Use high bitrates for ACK/CTS
There was a confusion in the usage of the bits AR5K_STA_ID1_ACKCTS_6MB and
AR5K_STA_ID1_BASE_RATE_11B. If they are set (1), we will get lower bitrates for
ACK and CTS. Therefore ath5k_hw_set_ack_bitrate_high(ah, false) actually
resulted in high bitrates, which i think is what we want anyways. Cleared the
confusion and added some documentation.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 2111ac0d888767999c7dd6d1309dcc1fb8012022 |
|
02-Apr-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: Adaptive Noise Immunity (ANI) Implementation
This is an Adaptive Noise Imunity (ANI) implementation for ath5k. I have looked
at both ath9k and HAL sources (they are nearly the same), and even though i
have implemented some things differently, the basic algorithm is practically
the same, for now. I hope that this can serve as a clean start to improve the
algorithm later.
This also adds a possibility to manually control ANI settings, right now only
thru a debugfs file:
* set lowest sensitivity (=highest noise immunity):
echo sens-low > /sys/kernel/debug/ath5k/phy0/ani
* set highest sensitivity (=lowest noise immunity):
echo sens-high > /sys/kernel/debug/ath5k/phy0/ani
* automatically control immunity (default):
echo ani-on > /sys/kernel/debug/ath5k/phy0/ani
* to see the parameters in use and watch them change:
cat /sys/kernel/debug/ath5k/phy0/ani
Manually setting sensitivity will turn the automatic control off. You can also
control each of the five immunity parameters (noise immunity, spur immunity,
firstep, ofdm weak signal detection, cck weak signal detection) manually thru
the debugfs file.
This is tested on AR5414 and nearly doubles the thruput in a noisy 2GHz band.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 495391d715a310a7cbf622850e372d40ac86ef6e |
|
25-Mar-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: simplify MIB counters
Let's keep MIB counter statistics in our own statistics structure and only
convert it to ieee80211_low_level_stats when needed by mac80211. Also we don't
need to read profile count registers in the MIB interrupt (they don't trigger
MIB interrupts).
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 200763bb7503102aa364658e2b32cb2463a08d91 |
|
10-Mar-2010 |
John W. Linville <linville@tuxdriver.com> |
ath5k: remove unused beacon timer code
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 6fe10e760bcde8c29b84ad16f54015af5ef59ff5 |
|
10-Mar-2010 |
John W. Linville <linville@tuxdriver.com> |
ath5k: remove some dead functions
"ath5k: remove stale function declarations, make some functions static"
commented-out some unused functions. This removes them.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
|
| ccfe5552aeb18c87a4d0ecb8cb7512280435bfdd |
|
09-Mar-2010 |
Bruno Randolf <br1@einfach.org> |
ath5k: remove double opmode definition
opmode (operating mode) was defined in struct ath5k_hw and struct ath5k_softc.
remove it from ath5k_hw and use only from ath5k_softc (sc->opmode).
(btw: what's the meaning of opmode when we have multiple interfaces?)
Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 626ede6b1aafb3a8cadfdd04b512fd1d3dc2113e |
|
19-Feb-2010 |
Pavel Roskin <proski@gnu.org> |
ath5k: remove stale function declarations, make some functions static
Remove all unnecessary function declarations from ath5k.h. Comment out
unused functions. Remove ath5k_hw_get_tsf32(), which is too trivial to
be commented out. Make functions static if suggested by sparse. Make
ath5k_pm_ops static.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 6e08d228b6d8e93d7b25b3573c6da7da179c2ae1 |
|
21-Dec-2009 |
Lukáš Turek <8an@praha12.net> |
ath5k: Implement mac80211 callback set_coverage_class
The callback sets slot time as specified in IEEE 802.11-2007 section
17.3.8.6 (for 20MHz channels only for now) and raises ACK and CTS
timeouts accordingly. The values are persistent, they are restored after
device reset.
Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 3578e6ebb305e6bf7519f6e86741772892f4d51a |
|
21-Dec-2009 |
Lukáš Turek <8an@praha12.net> |
ath5k: Reimplement clock rate to usec conversion
The original code was correct in 802.11a mode only, 802.11b/g uses
different clock rates. The new code uses values taken from FreeBSD HAL
and should be correct for all modes including turbo modes.
The former rate calculation was used by slope coefficient calculation
function ath5k_hw_write_ofdm_timings. However, this function requires
the 802.11a values even in 802.11g mode. Thus the use of
ath5k_hw_htoclock was replaced by hardcoded values. Possibly the slope
coefficient calculation is not related to clock rate at all.
Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| a3f86bff1c056f47c2df4c58bfcf7bdda8eaf9d0 |
|
07-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: fix regression which triggers an SME join upon assoc
This fixes a regression introduced by patch titled:
"atheros: define shared bssidmask setting"
The register for the BSSID was exchanged for the bssid mask register.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| abba06869e2546484fa142528737d1a0622add54 |
|
07-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: remove temporary low_id and high_id vars on ath5k_hw_set_associd()
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| be5d6b75e0fb3f7e23ea5325109ef4195f2b282a |
|
07-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: simplify passed params to ath5k_hw_set_associd()
We have access to common->curbssid and common->curaid so just
use those. Note that common->curaid is always 0 so this keeps
our current behaviour of always using 0 for now. Once we fix
storing the association ID passed by mac80211 this will
require no changes here.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 91b9eb8261acfe473c369750036df24ad071e5c1 |
|
07-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: fix regression introduced upon the removal of AR5K_HIGH_ID()
The trick was to add four bytes whenever this was used. There
are two places where this was missed.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| a72d57a862f700edf85da81aae3cd8f923e989a1 |
|
07-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: use ath_hw_setbssidmask() for bssid mask setting upon assoc
This should avoid future typos.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| eb053a037d8951018bdc9133c8d312da9cd0aefb |
|
07-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: fix regression on setting bssid mask on association
There was a typo on the second bssid mask register.
This was caused by the patch titled:
"ath5k: use common curbssid, bssidmask and macaddr"
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 13b81559200b8e54473e5b140323cbb5f2bb21c0 |
|
11-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: define shared bssidmask setting
Also make ath5k and ath9k use it, and share register definitions.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 954fecea5d1df4d1dc7bf9a822a2fad308e8588e |
|
10-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath5k: use common curbssid, bssidmask and macaddr
The ah_sta_id was really being used as the macaddr.
ath5k still does not use the association ID now passed
up by mac80211, that can be fixed later.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| bcd8f54a84ce99ade91c250a9bc850a9fd3389c1 |
|
10-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: use get_unaligned_le*() for bssid mask setting
Historically some macro helpers have been users for this,
AR5K_LOW_ID() and AR5K_HIGH_ID(), use upstream unaligned
helpers instead. This applid to ath5k and ar9170. ath9k
already uses this.
Worth noting is ath5k uses an ah_sta_id but that is already
the MAC address combined with the associaiton ID, ah_sta_id
is really ETH_ALEN in size.
Cc: Bob Copeland <me@bobcopeland.com>
Cc: Nick Kossifidis <mick@madwifi-project.org>
Cc: Christian Lamparter <chunkeey@web.de>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 17753748e15eaf29c8db15c5c05b8dde5db6e64d |
|
10-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath: move ath_bcast_mac to common header
This is used by both ath5k and ath9k to set the first bssid mask.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 35edf8aae8f903b154d658b9a7eed0d5c1a4a814 |
|
13-Jun-2009 |
Nick Kossifidis <mickflemm@gmail.com> |
ath5k: fix mesh beaconing
This patch is from Nick Kossifidis but he forgot to send it. It ensures
that the beacon queue gets started in mesh mode as well, otherwise ath5k
will not beacon in mesh point mode.
At this time, we still need to issue a scan before mesh beaconing will
work but that appears to be a separate problem.
Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| e31a16d6f64ef0e324c6f54d5112703c3f13a9c4 |
|
21-May-2009 |
Zhu Yi <yi.zhu@intel.com> |
wireless: move some utility functions from mac80211 to cfg80211
The patch moves some utility functions from mac80211 to cfg80211.
Because these functions are doing generic 802.11 operations so they
are not mac80211 specific. The moving allows some fullmac drivers
to be also benefit from these utility functions.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 428cbd4ff4d0f2423f49e499f499f04a636cb152 |
|
30-Apr-2009 |
Nick Kossifidis <mick@madwifi-project.org> |
ath5k: Beaconing fixes
* Write next beacon timer even on AP mode since without this we get
no beacons + ath9k does it too. Docs say that we must write 0 on
this register on AP mode to start TSF increment, we do both to be
on the safe side.
* Fix num_tx_pending function, we never read the register :P that's
why we got all those "beacon queue 7 didn't stop messages".
* Put full prioriy on beacon queue, lock all queues with lower
priority using the arblock and also bypass any arblock by seting
the arblock ignore flag.
* For the CAB queue (do we need this thing ?, it seems crap) since
it's supposed to fire up after each beacon (we don't use it on driver
part, ath9k/MadWiFi does), don't make it DBA gated but instead make
it fire after each beacon by using the beacon sent gated flag.
* Increase bmiss threshold to 10, that's what we used on MadWiFi for
a long time. Also when we have pending frames on the beacon queue (we
got a beacon that didn't make it on the air) it's more likely that
the beacon queue never started, probably due to faulty DBA setting,
so change that "beacon queue didn't stop" message.
Tested this with AP mode and IBSS mode and seems to work fine ;-)
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| ded7a7eaab2a39b7b5c36a2ec3be46f6ebcedba5 |
|
25-Apr-2009 |
Jiri Slaby <jirislaby@gmail.com> |
ath5k: 5211, don't crypt every protected frame
Set null key type even on ar5211, otherwise it en/decrypts every frame with
protected bit set which renders the card unusable on encrypted networks.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Bob Copeland <me@bobcopeland.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| 203c4805e91786f9a010bc7945a0fde70c9da28e |
|
31-Mar-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: put atheros wireless drivers into ath/
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|