| 862755ec07572036b0c69d738b88f89b6beede99 |
|
19-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: remove unnecessary *_SIZE defines
Some of the legacy comedi drivers have a *_SIZE define that is only
passed to comedi_request_region() to specify the size of the region.
Some of the pnp drivers (pci, etc.) also have a *_SIZE define which
is unused.
For aesthetics, remove these defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| b3ff824a81e8978deb56f6d163479c1a0a606037 |
|
30-Aug-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_dio_update_state() for complex cases
Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state for more complex cases where the hardware is only
updated based on the 'mask' of the channels that are modified.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| c7fe22f6f6e5715d29bdfca99358001c0dfbdae6 |
|
27-Aug-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2817: fix dt2817_dio_insn_config()
This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.
Use the comedi_dio_insn_config() helper to properly handle instructions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8e6b7915a1da703617dca28c33e150141fcec9b0 |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers do not need <linux/ioport.h>
All the ioport resources are managed by the comedi core. None of
the drivers depend on <linux/ioport.h>. Remove the includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| ce157f8032bbd46d9427034c335b0afd751da25d |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: don't rely on comedidev.h to include headers
comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.
Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.
Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 641f064e5df6fb3aaeb6256031a153a5efb16ca6 |
|
25-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove FSF address from boilerplate text
Addresses change...
Remove the paragraph with the FSF address from all the comedi source
files.
Also, remove the paragraph about the finding the complete GPL in the
COPYING file since it's unnecessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 21208519d42404150fef42283a20192ffe08b0af |
|
18-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_legacy_detach() in simple drivers
Use the new comedi_legacy_detach() helper in the (*detach) to release
the I/O region requested by these drivers.
Since the (*detach) for these drivers only releases the region, remove
the private (*detach) functions and use comedi_legacy_detach() directly
for the (*detach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| d6d0299000a63c617e0982baaac129a434b44cdf |
|
10-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2817: use comedi_request_region()
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5993f3a2692eed3c74c86882155b8703a0060ad5 |
|
08-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove unnecessary dev->board_name initialization
The dev->board_name is now initialized by the comedi core before calling
the(*attach) or (*auto_attach) function in a driver. As long as the driver
does no additional probing, it's no longer necessary initialize the board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| d784e4c33f93ceacf609b796aa53e33fc17ce8fe |
|
06-Sep-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: dt2817: remove subdevice pointer math
Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| a2714e3e42e746d6c8525c35fdcc58fb60c2830d |
|
18-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: fix return value for insn_bits functions
The comedi_subdevice 'insn_bits' functions return the number of data
elements used to perform the command. Most of the insn_bits functions
return an open coded '2' to indicate this. The same value is available
as 'insn->n'. Return that instead to better indicate what the return
means.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8b6c56949ffa83dbc2a6e8fa3f98b10a19372207 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: propogate error code from comedi_alloc_subdevices
comedi_alloc_subdevices can fail with -EINVAL or -ENOMEM. When it
does fail make sure to pass the proper error code back.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbott@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 2f0b9d082e5d0056a3aca4be038483a564849196 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: export alloc_subdevices as comedi_alloc_subdevices
Move the inline alloc_subdevices() function from comedidev.h
to drivers.c and rename it to comedi_alloc_subdevices(). The
function is large enough to warrant being an exported symbol
rather than being an inline in every driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 484ecc95d9cdfa8b2f7029e2f3409cf078aed4ab |
|
18-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: cleanup all the comedi_driver 'detach' functions
1. Change the return type from int to void
All the detach functions, except for the comedi usb drivers, simply
return success (0). Plus, the return code is never checked in the
comedi core.
The comedi usb drivers do return error codes but the conditions can
never happen.
The first check is:
if (!dev)
return -EFAULT;
This checks that the passed comedi_device pointer is valid. The detach
function itself is called using this pointer so it MUST always be valid
or there is a bug in the core:
if (dev->driver)
dev->driver->detach(dev);
And the second check:
usb = dev->private;
if (!usb)
return -EFAULT;
The dev->private pointer is setup in the attach function to point to the
probed usb device. This value could be NULL if the attach fails. But,
since the comedi core is going to unload the driver anyway and does not
check for errors there is no gain by returning one.
After removing these checks from the comedi usb drivers the detach
functions required a bit of cleanup.
2. Remove all the printk noise in the detach functions
All of the printk output is really just noise. The user did a rmmod to
unload the driver, we really don't need to tell them about it.
Also, some of the messages are output using:
dev_dbg(dev->hw_dev, ...
or
dev_info(dev->hw_dev, ...
Unfortunately the hw_dev value is only used by drivers that are doing
DMA. For most drivers this variable is going to be NULL so the output
is not going to work as expected.
3. Refactor a couple static 'free_resource' functions into the detach
functions.
The 'free_resource' function is only being called by the detach and it
makes more sense to just absorb the code.
4. Remove a couple unnecessary braces for single statements.
5. Remove unnecessary comments.
Most of the comedi drivers appear to be based on the comedi skel driver
and have the comments from that driver included. These comments make
sense in the skel driver for reference but they don't need to be in any
of the actual drivers.
6. Remove all the extra whitespace.
It's not needed to make the functions any more readable.
7. Remove the now unused 'attached_successfully' variable in the
cb_pcimdda driver.
This variable was only used to conditionally output some driver noise
during the detach. Since all the printk's have been removed this
variable is no longer necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 294f930d98be86fb4f34302c718a49719650857f |
|
04-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: use module_comedi_driver
Convert the refactored comedi drivers to use the module_comedi_driver()
macro which makes the code smaller and a bit simpler.
In the process, rename the driver variables from driver_* to *_driver,
as is more typical with other subsystems, and make sure they are all
static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 597092fcc448ae4716274e2d80830b5bc54e5617 |
|
28-Apr-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: refactor dt2817 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8cbf7a9e39e21d95c935e5e1a66050e769427569 |
|
11-Aug-2010 |
Sunny Aujla <sunnyfedora99@googlemail.com> |
Staging: comedi: fix brace coding style issue in dt2817.c
This is a patch to the dt2817.c file that fixes up all coding style
issues found by the checkpatch.pl tool
Signed-off-by: Sunny Aujla <sunnyfedora99@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 7114a28011f9d5f3d981731ad341177c21f9d948 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_INITCLEANUP macro
Move the init/exit routines to the respective C source files
instead of calling COMEDI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 90f703d30dd3e0c16ff80f35e34e511385a05ad5 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_MODULES_MACRO
Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls
to the respective C source files instead of calling COMEDI_MODULES_MACRO
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0a85b6f0ab0d2edb0d41b32697111ce0e4f43496 |
|
08-Jun-2009 |
Mithlesh Thukral <mithlesh@linsyssoft.com> |
Staging: Comedi: Lindent changes to comdi driver in staging tree
Lindent changes to comdi driver in staging tree.
This patch is followed by the checkpatch.pl error fixes.
Did not make them part of this patch as the patch size is already huge.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 68c3dbff9fc9f25872408d0e95980d41733d48d0 |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix the way structs are initialized.
Change from the foo: bar format to the .foo = bar format.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| c3744138715045adb316284ee7a1e608f0278f6c |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: remove assignment in conditionals
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| da91b2692e0939b307f9047192d2b9fe07793e7a |
|
09-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix "foo * bar" should be "foo *bar"
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0707bb04be89b18ee83b5a997e36cc585f0b988d |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_devconfig typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 90035c0886b256d75bced13b3b3cea5234aff136 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_insn typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 139dfbdfacb02e3ef3df936d2fabd1ad5f14ea88 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_driver typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 34c43922e62708d45e9660eee4b4f1fb7b4bf2c7 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_subdevice typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 71b5f4f11971dea972832ad63a994c7e5b45db6b |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_device typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 790c55415aa31f4c732729f94d2c3a54f7d3bfc2 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove lsampl_t and sampl_t typedefs
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0e221af2e9267e00723c278b28dedcc642fad9db |
|
19-Feb-2009 |
David Schleef <ds@schleef.org> |
Staging: comedi: add dt2817 driver
Driver for DataTranslation DT2817
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|