50f9f7983773b92af10d8c4d3175a2692559c493 |
|
06-Aug-2014 |
Hans Wennborg <hans@hanshq.net> |
usb: musb: ux500: fix decimal printf format specifiers prefixed with 0x The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Found by using regex suggested by Joe Perches. Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
086ed9a0bcca0201301b74a0c5160c04f2f38f8b |
|
13-Dec-2013 |
Lee Jones <lee.jones@linaro.org> |
usb: musb: ux500_dma: fix potential NULL dereference error static checker warning: "drivers/usb/musb/ux500_dma.c:335 ux500_dma_controller_start() error: potential NULL dereference 'param_array'." Acked-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
0f2aa8caeaa043f6cbe6281eb72efba5ff860904 |
|
21-Aug-2013 |
Lee Jones <lee.jones@linaro.org> |
usb: musb: ux500: Add check for NULL board data Dan Carpenter's automatic Smatch checker found an anomaly in the ux500 MUSB driver, whereby board data was checked before use in all but one occasion. It is believed that it needs to be checked every time. Smatch complaint: drivers/usb/musb/ux500_dma.c:335 ux500_dma_controller_start() error: we previously assumed 'data' could be null (see line 313) Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
c1a7d67c1901347bdb3d06536cd69d018fbf2c4b |
|
30-Jul-2013 |
Jingoo Han <jg1.han@samsung.com> |
usb: musb: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
66c01883ef19bf4537b16931567b7d35c65356ad |
|
19-Jun-2013 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
usb: musb: dma: merge ->start/stop into create/destroy The core code creates a controller and immediately after that it calls the ->start() callback. This one might drop an error but nobody cares. The same thing happens in the destroy corner: First ->stop() called followed by destroy callback. So why not merge those two into the same function since there is no difference. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
2968da0b2c7297a29d49c7084d6865c2cf627093 |
|
15-May-2013 |
Lee Jones <lee.jones@linaro.org> |
usb: musb: ux500: attempt to find channels by name before using pdata If we can ever get to a state where we can solely search for DMA channels by name, this will almost completely alleviate the requirement to pass copious amounts of information though platform data. Here we take the first step towards this. The next step will be to enable Device Tree complete with name<->event_line mapping. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
5f6091a023ca435c49467348e388fa89e635436a |
|
15-May-2013 |
Lee Jones <lee.jones@linaro.org> |
usb: musb: ux500: harden checks for platform data In its current state, the ux500-musb driver uses platform data pointers blindly with no prior checking. If no platform data pointer is passed this will Oops the kernel. In this patch we ensure platform data and board data are present prior to using them. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
be2dbb09a014cba5691c8483ad2d0747d3eeb514 |
|
15-May-2013 |
Lee Jones <lee.jones@linaro.org> |
usb: musb: ux500: move channel number knowledge into the driver For all ux500 based platforms the maximum number of end-points are used. Move this knowledge into the driver so we can relinquish the burden from platform data. This also removes quite a bit of complexity from the driver and will aid us when we come to enable the driver for Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
3147dad6fa457e0bb7edaab36f6d290c7048b49e |
|
15-May-2013 |
Fabio Baltieri <fabio.baltieri@linaro.org> |
usb: musb: various cosmetic fixes on ux500 files Various non functional coding style fixes on ux500_dma.c and phy-ab8500-usb.c drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
3ee1f2e6e51581d5cb9c312161a9a9b2f18f25bf |
|
03-Apr-2013 |
Fabio Baltieri <fabio.baltieri@linaro.org> |
usb: musb: ux500_dma: drop references to U5500 Drop references to deprecated U5500 platform in driver comments. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
6b0cfc656f8a649fbfbe11e76e0aa301ee26879e |
|
22-Mar-2013 |
Felipe Balbi <balbi@ti.com> |
usb: musb: ux500_dma: fix sparse warning fix the following sparse warning: drivers/usb/musb/ux500_dma.c:60:6: warning: symbol 'ux500_dma_callback' was not declared. Should it be static? Signed-off-by: Felipe Balbi <balbi@ti.com>
|
399e0f4f00adbfdea2122c1daec0d4015f56cc7a |
|
08-Mar-2013 |
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> |
usb: musb: ux500_dma: add missing MEM resource check Fix dma_controller_create() fail path in case memory resource is missing. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
6a3b003620f0bd31390422619092fcb87cf1069e |
|
06-Feb-2013 |
Felipe Balbi <balbi@ti.com> |
usb: musb: ux500_dma: kill compile warnings Fix the following compile warnings: drivers/usb/musb/ux500_dma.c: In function ‘ux500_configure_channel’: drivers/usb/musb/ux500_dma.c:96:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/usb/musb/ux500_dma.c: In function ‘ux500_dma_is_compatible’: drivers/usb/musb/ux500_dma.c:195:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Felipe Balbi <balbi@ti.com>
|
0f53e48132cd95b359fc79e0aa44db1c406b4eff |
|
06-Feb-2013 |
Felipe Balbi <balbi@ti.com> |
usb: musb: dsps: add missing include <linux/sizes.h> is the header defining SZ_4 and SZ_16M, we shouldn't depend on indirect inclusion so let's explicitly include it. Signed-off-by: Felipe Balbi <balbi@ti.com>
|
41ac7b3ab7fe1d6175839947a877fdf95cbd2211 |
|
19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
usb: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
db298da2c31e1dcf7c9b7c9cef6217ad3449ebb7 |
|
24-Aug-2012 |
Arnd Bergmann <arnd@arndb.de> |
ARM: nomadik: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the nomadik include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andreas Westin <andreas.westin@stericsson.com>
|
07a67bbb95ea7977846bd851dab5f4f2be8e488c |
|
09-Aug-2012 |
Shubhrajyoti D <shubhrajyoti@ti.com> |
usb: musb: Make dma_controller_create __devinit dma_controller_create is called only from musb_init_controller which is __devint so annotate dma_controller_create also with __devint. fixes the warn WARNING: vmlinux.o(.devinit.text+0x6fa8): Section mismatch in reference from the function musb_init_controller() to the function .init.text:dma_controller_create() The function __devinit musb_init_controller() references a function __init dma_controller_create(). If dma_controller_create is only used by musb_init_controller then annotate dma_controller_create with a matching annotation. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
16052827d98fbc13c31ebad560af4bd53e2b4dd5 |
|
08-Mar-2012 |
Alexandre Bounine <alexandre.bounine@idt.com> |
dmaengine/dma_slave: introduce inline wrappers Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
|
258aea76f552cc755da92e7e823abbb85e021514 |
|
01-Feb-2012 |
Viresh Kumar <viresh.kumar@st.com> |
dmaengine: Pass dma_slave_config .device_fc = NULL for all existing users .device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
|
be18a251892ab85d1bc10d87d336ee25f8dba615 |
|
17-Aug-2011 |
Per Forlin <per.forlin@linaro.org> |
usb: musb: ux500: optimize DMA callback routine Skip the use of work queue and call musb_dma_completion() directly from DMA callback context. Here follows measurements on a Snowball board with ondemand governor active. Performance using work queue: (105 MB) copied, 6.23758 s, 16.8 MB/s (105 MB) copied, 5.7151 s, 18.3 MB/s (105 MB) copied, 5.83583 s, 18.0 MB/s (105 MB) copied, 5.93611 s, 17.7 MB/s Performance without work queue (105 MB) copied, 5.62173 s, 18.7 MB/s (105 MB) copied, 5.61811 s, 18.7 MB/s (105 MB) copied, 5.57817 s, 18.8 MB/s (105 MB) copied, 5.58549 s, 18.8 MB/s Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
8341544c9d95610f86b560333c7b22dd1096ca4f |
|
14-Oct-2011 |
Vinod Koul <vinod.koul@linux.intel.com> |
USB-musb: move to dma_transfer_direction fixup usage of dma direction by introducing dma_transfer_direction, this patch moves usb/musb driver to use new enum Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
|
afbd0749c0507d5fea980b3bfa76efc43af83d60 |
|
03-Aug-2011 |
Per Forlin <per.forlin@linaro.org> |
usb: musb: ux500: replace missing DBG with dev_dbg ux500_dma.c fail to compile becase DBG has been removed from musb_debug. Use dev_dbg for all prints. Cc: stable@vger.kernel.org Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab<mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
d366d39bab562545ccb4a5931d62d0fd9e6a8ffc |
|
02-Aug-2011 |
Per Forlin <per.forlin@linaro.org> |
usb: musb: ux500: set dma config for both src and dst The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
8dcc8f72e3f3b7ed1ba1cd5641e15658e2140abe |
|
22-Mar-2011 |
Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> |
usb: musb: ux500: add dma glue layer for ux500 Unaligned sizes and buffers are not supported and they will be filtered out by is_compatible(). Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|