Cross Reference: /arch/tile/include/arch/mpipe

Lines Matching defs:be
8  *   This program is distributed in the hope that it will be useful, but
28  * is used to specify the location of egress packet data to be sent out of
53     /** Reserved.  Must be zero. */
58      * Nothing to be sent.  Used, for example, when software has dropped a
63      * Notification interrupt will be delivered when packet has been egressed.
68      * command.  Must be clear on all but the last descriptor for an egress
72     /** Reserved.  Must be zero. */
75      * Number of bytes to be sent for this descriptor.  When zero, no data
76      * will be moved and the buffer descriptor will be ignored.  If the
80      * buffer, subsequent buffer descriptors will be fetched prior to
84     /** Reserved.  Must be zero. */
88      * byte moved by this descriptor.  Must be zero if CSUM=0 in this
89      * descriptor.  Must be less than XFER_SIZE (e.g. the first byte of the
90      * CSUM_DEST must be within the span of this descriptor).
97      * descriptor.  Must be zero if CSUM=0 in this descriptor.
102      * Specified in network order.  That is, bits[7:0] will be added to the
103      * byte pointed to by CSUM_START and bits[15:8] will be added to the byte
105      * Must be zero if CSUM=0 in this descriptor.
127     /** Virtual address.  Must be sign extended by consumer. */
139      * egressed, buffers with HWB set will be returned to the other mPIPE
148      * indicates whether the buffer will be released to the buffer stack
208      * Typically written by load balancer, but can be overridden by
234      * will be reduced to reflect the actual number of valid bytes written to
262      * fields.  The result will be placed in CSUM_VAL.
273      * descriptor should both be dropped, both be delivered, or only the
274      * descriptor should be delivered.
280      * contains the sequence number selector and the GP_SQN field will be
282      * field is left intact and be used as "Custom" bytes.
287      * Enable TimeStamp insertion.  When clear, timestamp field may be filled
294      * Enable PacketSQN insertion.  When clear, PacketSQN field may be filled
306     uint_reg_t be           : 1;
317     uint_reg_t be           : 1;
361      * byte swap will be visible to Tile software if the CS bit is clear.
418      * selects which sequence number is to be applied by writing the 13-bit
420      * indicated in IDMA_INFO.EXT_SQN_SUPPORT), the GP_SQN can be extended to
422      * PACKET_SQN will be reduced to 32 bits.
456     /** Virtual address.  Must be sign extended by consumer. */
468      * egressed, buffers with HWB set will be returned to the other mPIPE
477      * indicates whether the buffer will be released to the buffer stack