/drivers/media/rc/ |
H A D | Makefile | 0 rc-core-objs := rc-main.o rc-ir-raw.o 5 obj-$(CONFIG_RC_CORE) += rc-core.o 31 obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
|
/drivers/staging/lustre/lustre/ptlrpc/ |
H A D | ptlrpc_module.c | 56 int rc, cleanup_phase = 0; local 67 rc = req_layout_init(); 68 if (rc) 69 return rc; 71 rc = ptlrpc_hr_init(); 72 if (rc) 73 return rc; 76 rc = ptlrpc_request_cache_init(); 77 if (rc) 81 rc [all...] |
/drivers/ras/ |
H A D | ras.c | 17 int rc = 0; local 20 rc = ras_add_daemon_trace(); 22 return rc;
|
/drivers/s390/char/ |
H A D | hmcdrv_mod.c | 36 int rc = hmcdrv_ftp_probe(); /* perform w/o cache */ local 38 if (rc) 39 return rc; 41 rc = hmcdrv_cache_startup(hmcdrv_mod_cachesize); 43 if (rc) 44 return rc; 46 rc = hmcdrv_dev_init(); 48 if (rc) 51 return rc;
|
/drivers/staging/lustre/lustre/lmv/ |
H A D | lmv_fld.c | 58 int rc; local 66 rc = fld_client_lookup(&lmv->lmv_fld, fid_seq(fid), mds, 68 if (rc) { 70 fid_seq(fid), rc); 71 return rc; 81 rc = -EINVAL; 83 return rc;
|
/drivers/xen/ |
H A D | fallback.c | 11 int rc; local 15 rc = _hypercall1(int, event_channel_op_compat, &op); 39 WARN_ON(rc != -ENOSYS); 43 return rc; 50 int rc; local 54 rc = _hypercall1(int, physdev_op_compat, &op); 75 WARN_ON(rc != -ENOSYS); 79 return rc;
|
/drivers/ata/ |
H A D | ahci_platform.c | 36 int rc; local 42 rc = ahci_platform_enable_resources(hpriv); 43 if (rc) 44 return rc; 49 rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info); 50 if (rc) 56 return rc;
|
/drivers/clk/ti/ |
H A D | clk-44xx.c | 283 int rc; local 295 rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ); 296 if (rc) 307 rc = clk_set_parent(abe_dpll_ref, sys_32k_ck); 309 if (!rc) 310 rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ); 311 if (rc)
|
H A D | clk-54xx.c | 227 int rc; local 236 rc = clk_set_parent(abe_dpll_ref, sys_32k_ck); 238 if (!rc) 239 rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ); 240 if (rc) 244 if (!rc) 245 rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ * 2); 246 if (rc) 250 rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); 251 if (rc) [all...] |
H A D | clk-7xx.c | 309 int rc; local 320 rc = clk_set_parent(abe_dpll_mux, sys_clkin2); 321 if (!rc) 322 rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ); 323 if (rc) 327 rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ * 2); 328 if (rc) 332 rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ); 333 if (rc) 337 rc [all...] |
/drivers/media/usb/em28xx/ |
H A D | Makefile | 5 em28xx-rc-objs := em28xx-input.o 11 obj-$(CONFIG_VIDEO_EM28XX_RC) += em28xx-rc.o
|
/drivers/mtd/maps/ |
H A D | ts5500_flash.c | 70 int rc = 0; local 76 rc = -EIO; 87 rc = -ENXIO; 99 return rc;
|
/drivers/pci/hotplug/ |
H A D | rpaphp_pci.c | 37 int rc; local 40 rc = rtas_get_sensor(DR_ENTITY_SENSE, slot->index, state); 42 if (rc < 0) { 43 if (rc == -EFAULT || rc == -EEXIST) { 50 rc = rtas_set_power_level(slot->power_domain, POWER_ON, 52 if (rc < 0) { 53 dbg("%s: power on slot[%s] failed rc=%d.\n", 54 __func__, slot->name, rc); 56 rc 78 int rc, level, state; local [all...] |
/drivers/staging/ozwpan/ |
H A D | ozurbparanoia.c | 38 int rc = -1; local 43 rc = 0; 51 return rc;
|
/drivers/tty/hvc/ |
H A D | hvc_irq.c | 25 int rc; local 31 rc = request_irq(irq, hvc_handle_interrupt, 0, 33 if (!rc) 35 return rc;
|
/drivers/char/hw_random/ |
H A D | powernv-rng.c | 48 int rc; local 50 rc = hwrng_register(&powernv_hwrng); 51 if (rc) { 53 if (rc == -EEXIST) 54 rc = -ENODEV; 56 return rc;
|
/drivers/char/ |
H A D | scx200_gpio.c | 77 int rc; local 90 rc = platform_device_add(pdev); 91 if (rc) 99 rc = register_chrdev_region(devid, MAX_PINS, "scx200_gpio"); 101 rc = alloc_chrdev_region(&devid, 0, MAX_PINS, "scx200_gpio"); 104 if (rc < 0) { 105 dev_err(&pdev->dev, "SCx200 chrdev_region err: %d\n", rc); 119 return rc;
|
/drivers/clk/ |
H A D | clk-conf.c | 21 int index, rc, num_parents; local 31 rc = of_parse_phandle_with_args(node, "assigned-clock-parents", 33 if (rc < 0) { 35 if (rc == -ENOENT) 38 return rc; 49 rc = of_parse_phandle_with_args(node, "assigned-clocks", 51 if (rc < 0) 54 rc = 0; 61 rc = PTR_ERR(clk); 65 rc 83 int rc, index = 0; local 133 int rc; local [all...] |
/drivers/cpufreq/ |
H A D | cpufreq_userspace.c | 56 int rc = 0; local 89 return rc;
|
/drivers/edac/ |
H A D | amd64_edac_dbg.c | 45 int rc; local 47 rc = device_create_file(&mci->dev, &dev_attr_dhar); 48 if (rc < 0) 49 return rc; 50 rc = device_create_file(&mci->dev, &dev_attr_dbam); 51 if (rc < 0) 52 return rc; 53 rc = device_create_file(&mci->dev, &dev_attr_topmem); 54 if (rc < 0) 55 return rc; [all...] |
/drivers/eisa/ |
H A D | pci_eisa.c | 24 int rc, i; local 27 if ((rc = pci_enable_device (pdev))) { 29 return rc;
|
/drivers/ide/ |
H A D | ide-pnp.c | 40 int rc; local 68 rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host); 69 if (rc) 79 return rc;
|
H A D | rz1000.c | 49 int rc; local 51 rc = pci_enable_device(dev); 52 if (rc) 53 return rc;
|
/drivers/isdn/hysdn/ |
H A D | hysdn_init.c | 63 int rc; local 65 rc = pci_enable_device(akt_pcidev); 66 if (rc) 67 return rc; 71 rc = -ENOMEM; 90 rc = -EBUSY; 109 return rc; 158 int rc; local 162 rc = pci_register_driver(&hysdn_pci_driver); 163 if (rc) [all...] |
/drivers/media/pci/cx88/ |
H A D | cx88-vp3054-i2c.c | 111 int rc; local 134 rc = i2c_bit_add_bus(&vp3054_i2c->adap); 135 if (0 != rc) { 142 return rc;
|