Searched refs:PFX (Results 26 - 50 of 132) sorted by relevance

123456

/drivers/char/ipmi/
H A Dipmi_watchdog.c72 #define PFX "IPMI Watchdog: " macro
431 printk(KERN_WARNING PFX "set timeout error: %d\n",
552 printk(KERN_WARNING PFX
644 printk(KERN_WARNING PFX "heartbeat failure: %d\n",
655 printk(KERN_ERR PFX ": Unable to restore the IPMI"
671 printk(KERN_ERR PFX ": Unable to send the command to"
913 printk(KERN_CRIT PFX
948 printk(KERN_INFO PFX "response: The IPMI controller appears"
952 printk(KERN_ERR PFX "response: Error %x on cmd %x\n",
1001 printk(KERN_CRIT PFX "Unabl
[all...]
H A Dipmi_si_intf.c78 #define PFX "ipmi_si: " macro
1695 printk(KERN_WARNING PFX "No hotmod %s given.\n", name);
1708 printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr);
1719 printk(KERN_WARNING PFX
1726 printk(KERN_WARNING PFX
1808 printk(KERN_WARNING PFX "Invalid hotmod address"
1852 printk(KERN_WARNING PFX
1934 printk(KERN_INFO PFX "probing via hardcoded address\n");
1943 printk(KERN_WARNING PFX "Interface type specified "
1961 printk(KERN_WARNING PFX "Interfac
[all...]
/drivers/scsi/bnx2fc/
H A Dbnx2fc_tgt.c94 printk(KERN_ERR PFX "Failed to allocate conn id for "
102 printk(KERN_ERR PFX "Failed to allocate resources\n");
115 printk(KERN_ERR PFX "ofld_req failed\n");
140 printk(KERN_ERR PFX "map doorbell failed - no mem\n");
146 pr_err(PFX "enable session failed\n");
270 printk(KERN_ERR PFX "CLEANUP on port 0x%x:"
332 printk(KERN_ERR PFX "ERROR!! destroy timed out\n");
338 printk(KERN_ERR PFX "ERROR!! DISABLE req failed, destroy"
341 printk(KERN_ERR PFX "ERROR!! DISABLE req timed out, destroy"
456 printk(KERN_ERR PFX "rpor
[all...]
H A Dbnx2fc_fcoe.c424 printk(KERN_ERR PFX "bnx2fc_rcv: lport is NULL\n");
435 printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n");
511 printk(KERN_ERR PFX "Invalid lport struct\n");
585 printk(KERN_WARNING PFX "dropping frame with "
697 printk(KERN_ERR PFX "Error on scsi_add_host\n");
791 printk(KERN_ERR PFX "ERROR:bnx2fc_destroy_timer - "
859 printk(KERN_ERR PFX "Unknown netevent %ld", event);
962 printk(KERN_ERR PFX "em_config:fc_exch_mgr_alloc failed\n");
1074 printk(KERN_ERR PFX "Failed to create vport, "
1081 printk(KERN_ERR PFX "v
[all...]
H A Dbnx2fc_hwi.c71 printk(KERN_ERR PFX "hba->cnic NULL during fcoe fw init\n");
393 printk(KERN_ERR PFX "WARN: enable_req port_id = 0x%x,"
576 printk(KERN_ERR PFX "fc_frame_alloc failure\n");
601 printk(KERN_ERR PFX "dropping ELS 0x%x\n", op);
722 printk(KERN_ERR PFX "err_warn: Not a SCSI cmd\n");
751 printk(KERN_ERR PFX "err_warn: io_req (0x%x) already "
778 printk(KERN_ERR PFX "SRR in progress\n");
796 printk(KERN_ERR PFX "err_warn: initiate_abts "
849 printk(KERN_ERR PFX "err_warn: Not a SCSI cmd\n");
867 printk(KERN_ERR PFX "Unso
[all...]
H A Dbnx2fc_els.c77 printk(KERN_ERR PFX "Unable to allocate cb_arg for RRQ\n");
153 printk(KERN_ERR PFX "Unable to alloc mp buf\n");
158 printk(KERN_ERR PFX "l2_els_compl: resp len is "
186 printk(KERN_ERR PFX "Unable to allocate cb_arg for ADISC\n");
214 printk(KERN_ERR PFX "Unable to allocate cb_arg for LOGO\n");
242 printk(KERN_ERR PFX "Unable to allocate cb_arg for LOGO\n");
324 printk(KERN_ERR PFX "srr buf: mem alloc failure\n");
332 printk(KERN_ERR PFX "fc_frame_alloc failure\n");
449 printk(KERN_ERR PFX "rec buf: mem alloc failure\n");
457 printk(KERN_ERR PFX "fc_frame_allo
[all...]
/drivers/ide/
H A Dide-atapi.c16 #define PFX DRV_NAME ": " macro
205 printk(KERN_WARNING PFX "%s: failed to map sense "
227 printk(KERN_WARNING PFX "%s: error queuing a sense request\n",
299 printk(KERN_INFO PFX "cmd 0x%x timed out\n",
353 printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
369 printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name,
373 printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
418 printk(KERN_ERR PFX "%s: DMA %s error\n",
450 printk(KERN_ERR PFX "%s: I/O error in request "
499 printk(KERN_ERR PFX "
[all...]
H A Dide-floppy.c96 printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
115 printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
184 printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
247 printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
261 printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
322 printk(KERN_ERR PFX "Can't get flexible disk page params\n");
345 printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
357 printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
391 printk(KERN_ERR PFX "Can't get floppy parameters\n");
427 printk(KERN_INFO PFX "
[all...]
/drivers/block/
H A Dsunvdc.c25 #define PFX DRV_MODULE_NAME ": " macro
128 pr_debug(PFX "Multisession CDs not supported\n");
142 pr_debug(PFX "ioctl %08x not supported\n", command);
173 printk(KERN_ERR PFX "Received unknown msg [%02x:%02x:%04x:%08x]\n",
175 printk(KERN_ERR PFX "Resetting connection.\n");
223 printk(KERN_ERR PFX "%s: Bogus vdisk_type 0x%x\n",
229 printk(KERN_ERR PFX "%s: BLOCK size increased "
247 printk(KERN_ERR PFX "%s: Attribute NACK\n", vio->name);
328 printk(KERN_WARNING PFX "Unexpected LDC event %d\n", event);
444 printk(KERN_ERR PFX "ldc_map_s
[all...]
/drivers/net/wireless/orinoco/
H A Dhermes_dld.c47 #define PFX "hermes_dld: " macro
294 pr_debug(PFX "Programming block of length %d "
419 pr_debug(PFX "Found record 0x%04x at %p\n",
430 pr_debug(PFX
460 pr_debug(PFX "Using default record 0x%04x at %p\n",
H A Dspectrum_cs.c22 #define PFX DRIVER_NAME ": " macro
210 printk(KERN_ERR PFX "GetNextTuple(): No matching "
241 printk(KERN_ERR PFX "orinoco_init() failed\n");
248 printk(KERN_ERR PFX "orinoco_if_add() failed\n");
/drivers/infiniband/hw/nes/
H A Dnes.c321 printk(KERN_INFO PFX "%s: Reference count already 0 for QP%d, last aeq = 0x%04X.\n",
469 printk(KERN_INFO PFX "NetEffect RNIC driver v%s loading. (%s)\n",
474 printk(KERN_ERR PFX "Unable to enable PCI device. (%s)\n", pci_name(pcidev));
488 printk(KERN_ERR PFX "PCI regions not an MMIO resource\n");
496 printk(KERN_ERR PFX "Unable to request regions. (%s)\n", pci_name(pcidev));
503 printk(KERN_ERR PFX "64b DMA mask configuration failed\n");
508 printk(KERN_ERR PFX "64b DMA consistent mask configuration failed\n");
514 printk(KERN_ERR PFX "32b DMA mask configuration failed\n");
519 printk(KERN_ERR PFX "32b DMA consistent mask configuration failed\n");
529 printk(KERN_ERR PFX "
[all...]
/drivers/char/agp/
H A Dgeneric.c430 printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
470 printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
498 printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
516 printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate. "
521 printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate. "
532 printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm);
602 printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
610 printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm);
614 printk(KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4);
643 printk(KERN_INFO PFX "
[all...]
H A Di460-agp.c116 printk(KERN_ERR PFX
130 printk(KERN_ERR PFX "GART SRAMS disabled on 460GX chipset\n");
131 printk(KERN_ERR PFX "AGPGART operation not possible\n");
137 printk(KERN_ERR PFX "We can't have a 32GB aperture with 4KB GART pages\n");
256 printk(KERN_ERR PFX "ioremap failed\n");
312 printk(KERN_ERR PFX "Looks like we're out of AGP memory\n");
373 printk(KERN_ERR PFX "Couldn't alloc 4M GART page...\n");
381 printk(KERN_ERR PFX "Out of memory, we're in trouble...\n");
420 printk(KERN_ERR PFX "Looks like we're out of AGP memory\n");
608 printk(KERN_INFO PFX "Detecte
[all...]
H A Dhp-agp.c81 printk(KERN_INFO PFX "HP ZX1 IOC: IOPDIR shared with sba_iommu\n");
96 printk(KERN_ERR PFX "Invalid IOTLB page size "
118 printk(KERN_ERR PFX "No reserved IO PDIR entry found; "
131 printk(KERN_INFO PFX "HP ZX1 IOC: IOPDIR dedicated to GART\n");
220 printk(KERN_ERR PFX "Invalid capability ID 0x%02x at 0x%x\n",
300 printk(KERN_ERR PFX "Couldn't allocate contiguous "
503 printk(KERN_ERR PFX "Detected HP ZX1 "
520 printk(KERN_INFO PFX "Detected HP ZX1 %s AGP chipset "
/drivers/char/hw_random/
H A Damd-rng.c35 #define PFX KBUILD_MODNAME ": " macro
148 pr_err(PFX "RNG registering failed (%d)\n",
/drivers/cpufreq/
H A Dspeedstep-lib.c21 #define PFX "speedstep-lib: " macro
116 printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
211 printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
456 printk(KERN_WARNING PFX "frequency transition "
/drivers/sbus/char/
H A Ddisplay7seg.c27 #define PFX DRIVER_NAME ": " macro
188 printk(KERN_ERR PFX "Cannot map chip registers\n");
194 printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n",
215 printk(KERN_INFO PFX "7-Segment Display%s at [%s:0x%llx] %s\n",
H A Denvctrl.c37 #define PFX DRIVER_NAME ": " macro
198 printk(KERN_INFO PFX "Pin status will not clear.\n");
216 printk(KERN_INFO PFX "Busy bit will not clear.\n");
886 printk(KERN_ERR PFX "Failed to allocate table.\n");
891 printk(KERN_ERR PFX "Failed to get table.\n");
997 printk(KERN_ERR PFX
1004 printk(KERN_INFO PFX "%s starting...\n", current->comm);
1026 printk(KERN_INFO PFX "%s exiting...\n", current->comm);
1071 printk(KERN_ERR PFX "Unable to get misc minor %d\n",
1080 printk(KERN_INFO PFX "Initialize
[all...]
/drivers/staging/bcm/
H A Dheaders.h74 #define PFX DRV_NAME " " macro
/drivers/scsi/
H A Dmac_esp.c35 #define PFX DRV_MODULE_NAME ": " macro
140 printk(KERN_ERR PFX "FIFO is not empty (sreg %02x)\n",
166 printk(KERN_ERR PFX "PDMA timeout (sreg %02x)\n",
290 printk(KERN_ERR PFX "FIFO is empty (sreg %02x)\n",
308 printk(KERN_ERR PFX "IRQ timeout (sreg %02x)\n", esp->sreg);
555 printk(KERN_INFO PFX "using PIO for controller %d\n", dev->id);
561 printk(KERN_INFO PFX "using PDMA for controller %d\n", dev->id);
/drivers/infiniband/hw/amso1100/
H A Dc2.c932 printk(KERN_INFO PFX "AMSO1100 Gigabit Ethernet driver v%s loaded\n",
938 printk(KERN_ERR PFX "%s: Unable to enable PCI device\n",
962 printk(KERN_ERR PFX "PCI regions not an MMIO resource\n");
970 printk(KERN_ERR PFX "Invalid PCI region sizes\n");
978 printk(KERN_ERR PFX "%s: Unable to request regions\n",
986 printk(KERN_ERR PFX "64b DMA configuration failed\n");
992 printk(KERN_ERR PFX "32b DMA configuration failed\n");
1004 printk(KERN_ERR PFX
1013 printk(KERN_ERR PFX "Downlevel Firmware boot loader "
1019 printk(KERN_ERR PFX "Adapte
[all...]
/drivers/infiniband/ulp/iser/
H A Discsi_iser.h71 #define PFX DRV_NAME ": " macro
77 printk(KERN_DEBUG PFX "%s: " fmt,\
84 pr_warn(PFX "%s: " fmt, \
91 pr_info(PFX "%s: " fmt, \
97 printk(KERN_ERR PFX "%s: " fmt, \
/drivers/video/fbdev/
H A Ds1d13xxxfb.c40 #define PFX "s1d13xxxfb: " macro
666 printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n");
727 dbg(PFX "bpp=%d, lcd_bpp=%d, "
730 dbg(PFX "xres=%d, yres=%d, vxres=%d, vyres=%d "
826 printk(KERN_ERR PFX "unable to map registers\n");
836 printk(KERN_ERR PFX "unable to map framebuffer\n");
858 printk(KERN_INFO PFX "chip production id %i = %s\n",
860 printk(KERN_INFO PFX "chip revision %i\n", revision);
862 printk(KERN_INFO PFX
865 printk(KERN_INFO PFX "pleas
[all...]
/drivers/input/serio/
H A Dgscps2.c45 #define PFX "gscps2.c: " macro
154 printk(KERN_DEBUG PFX "timeout - could not write byte %#x\n", data);
290 printk(KERN_DEBUG PFX "sending byte %#x failed.\n", data);
376 printk(KERN_WARNING PFX "Unsupported PS/2 port at 0x%08lx (id=%d) ignored\n",

Completed in 405 milliseconds

123456