/drivers/media/common/b2c2/ |
H A D | flexcop.h | 16 #define dprintk(level,args...) \ macro 19 #define dprintk(level,args...) macro 22 #define deb_info(args...) dprintk(0x01, args) 23 #define deb_tuner(args...) dprintk(0x02, args) 24 #define deb_i2c(args...) dprintk(0x04, args) 25 #define deb_ts(args...) dprintk(0x08, args) 26 #define deb_sram(args...) dprintk(0x10, args) 27 #define deb_rdump(args...) dprintk(0x20, args)
|
/drivers/media/usb/dvb-usb/ |
H A D | az6027.h | 9 #define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args) 10 #define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args) 11 #define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args) 12 #define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args)
|
H A D | dw2102.h | 7 #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args) 8 #define deb_rc(args...) dprintk(dvb_usb_dw2102_debug, 0x04, args)
|
H A D | cinergyT2.h | 42 #define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) 43 #define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) 44 #define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) 45 #define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) 46 #define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) 47 #define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) 48 #define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) 49 #define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) 50 #define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args)
|
H A D | dvb-usb-common.h | 17 #define deb_info(args...) dprintk(dvb_usb_debug,0x001,args) 18 #define deb_xfer(args...) dprintk(dvb_usb_debug,0x002,args) 19 #define deb_pll(args...) dprintk(dvb_usb_debug,0x004,args) 20 #define deb_ts(args...) dprintk(dvb_usb_debug,0x008,args) 21 #define deb_err(args...) dprintk(dvb_usb_debug,0x010,args) 22 #define deb_rc(args...) dprintk(dvb_usb_debug,0x020,args) 23 #define deb_fw(args...) dprintk(dvb_usb_debug,0x040,args) 24 #define deb_mem(args...) dprintk(dvb_usb_debug,0x080,args) 25 #define deb_uxfer(args...) dprintk(dvb_usb_debug,0x100,args)
|
H A D | friio.h | 34 #define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) 35 #define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) 36 #define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) 37 #define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args)
|
/drivers/media/pci/bt8xx/ |
H A D | dst_ca.c | 38 #define dprintk(x, y, z, format, arg...) do { \ macro 84 dprintk(verbose, DST_CA_DEBUG, 1, " Computing string checksum."); 85 dprintk(verbose, DST_CA_DEBUG, 1, " -> string length : 0x%02x", length); 87 dprintk(verbose, DST_CA_DEBUG, 1, " -> checksum : 0x%02x", check_string[length]); 99 dprintk(verbose, DST_CA_INFO, 1, " Write not successful, trying to recover"); 104 dprintk(verbose, DST_CA_ERROR, 1, " DST PIO disable failed."); 108 dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover"); 114 dprintk(verbose, DST_CA_NOTICE, 1, " 8820 not ready"); 118 dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover"); 137 dprintk(verbos [all...] |
/drivers/media/pci/mantis/ |
H A D | mantis_evm.c | 50 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); 59 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); 69 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); 72 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); 75 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); 78 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); 81 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); 84 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); 87 dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); 90 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_vp1034.c | 53 dprintk(MANTIS_ERROR, 1, "Polarization=[13V]"); 58 dprintk(MANTIS_ERROR, 1, "Polarization=[18V]"); 63 dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); 66 dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage); 85 dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); 88 dprintk(MANTIS_ERROR, 1, 96 dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", 103 dprintk(MANTIS_ERROR, 1, "Done!");
|
H A D | mantis_core.c | 49 dprintk(verbose, MANTIS_ERROR, 1, 72 dprintk(verbose, MANTIS_ERROR, 1, 89 dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); 93 dprintk(verbose, MANTIS_ERROR, 0, 142 dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", 145 dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", 148 dprintk(verbose, MANTIS_ERROR, 0, 155 dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); 160 dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); 165 dprintk(verbos [all...] |
H A D | mantis_ca.c | 45 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); 58 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); 71 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); 84 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); 97 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); 113 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); 123 dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); 134 dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); 137 dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); 140 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_cards.c | 84 dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); 105 dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); 107 dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); 110 dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); 116 dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); 120 dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); 123 dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); 126 dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); 129 dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); 132 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_dvb.c | 49 dprintk(MANTIS_DEBUG, 1, "Power ON"); 57 dprintk(MANTIS_DEBUG, 1, "Power OFF"); 63 dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power); 75 dprintk(MANTIS_DEBUG, 1, "Frontend RESET"); 96 dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err); 108 dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed"); 110 dprintk(MANTIS_DEBUG, 1, "no frontend ?"); 115 dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds); 118 dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma"); 131 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_ioc.c | 52 dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", 67 dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); 72 dprintk(MANTIS_ERROR, 0, " MAC Address=[%pM]\n", mac_addr); 83 dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); 90 dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); 103 dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); 111 dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); 118 dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
|
H A D | hopper_cards.c | 76 dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); 97 dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); 99 dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); 102 dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); 108 dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); 112 dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); 115 dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); 118 dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); 121 dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); 124 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_dma.c | 61 dprintk(MANTIS_ERROR, 1, 73 dprintk(MANTIS_ERROR, 1, 96 dprintk(MANTIS_ERROR, 1, 101 dprintk(MANTIS_ERROR, 1, 112 dprintk(MANTIS_ERROR, 1, 119 dprintk(MANTIS_ERROR, 1, 127 dprintk(MANTIS_ERROR, 1, "Out of memory (?) ....."); 135 dprintk(MANTIS_DEBUG, 1, "Mantis DMA init"); 137 dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); 157 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_pci.c | 56 dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", 66 dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err); 72 dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); 83 dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !"); 92 dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !"); 101 dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", 106 dprintk(MANTIS_ERROR, 0, 121 dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err); 131 dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret); 136 dprintk(MANTIS_ERRO [all...] |
H A D | mantis_hif.c | 51 dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); 54 dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); 69 dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); 72 dprintk(MANTIS_DEBUG, 1, "Write Acknowledged"); 79 dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write operation timed out!", mantis->num); 84 dprintk(MANTIS_DEBUG, 1, "HIF Write success"); 94 dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); 107 dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); 113 dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); 123 dprintk(MANTIS_DEBU [all...] |
H A D | mantis_i2c.c | 42 dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ", 64 dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); 73 dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); 77 dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); 79 dprintk(MANTIS_INFO, 0, "]\n"); 89 dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ", 93 dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); 112 dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); 121 dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); 123 dprintk(MANTIS_INF [all...] |
H A D | mantis_uart.c | 75 dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); 79 dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); 82 dprintk(MANTIS_ERROR, 1, "UART framing error"); 86 dprintk(MANTIS_ERROR, 1, "UART parity error"); 104 dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]); 106 dprintk(MANTIS_DEBUG, 0, "\n"); 151 dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s", 176 dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
|
/drivers/media/pci/zoran/ |
H A D | videocodec.c | 52 #define dprintk(num, format, args...) \ macro 85 dprintk(1, KERN_ERR "videocodec_attach: no data\n"); 89 dprintk(2, 94 dprintk(1, 104 dprintk(4, "videocodec_attach: try '%s'\n", 113 dprintk(1, 124 dprintk(3, "videocodec_attach '%s'\n", 128 dprintk(1, 138 dprintk(4, 144 dprintk( [all...] |
H A D | zr36016.c | 60 #define dprintk(num, format, args...) \ macro 85 dprintk(1, 89 dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, 100 dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, 107 dprintk(1, 128 dprintk(1, 133 dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name, 143 dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name, 151 dprintk(1, 183 dprintk( [all...] |
/drivers/media/pci/saa7164/ |
H A D | saa7164-api.c | 34 dprintk(DBGLVL_API, "%s()\n", __func__); 57 dprintk(DBGLVL_API, "%s()\n", __func__); 84 dprintk(DBGLVL_API, "%s(level=%d)\n", __func__, level); 92 dprintk(DBGLVL_API, "%s() Was %d\n", __func__, lvl.dwDebugLevel); 111 dprintk(DBGLVL_API, "%s(nr=%d, unitid=0x%x)\n", __func__, 132 dprintk(DBGLVL_API, "SET/PROBE Verified\n"); 151 dprintk(DBGLVL_API, "SET/COMMIT Verified\n"); 153 dprintk(DBGLVL_API, "rsp.bmHint = 0x%x\n", rsp.bmHint); 154 dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n", 156 dprintk(DBGLVL_AP [all...] |
H A D | saa7164-bus.c | 60 dprintk(DBGLVL_BUS, "Dumping the bus structure:\n"); 61 dprintk(DBGLVL_BUS, " .type = %d\n", b->Type); 62 dprintk(DBGLVL_BUS, " .dev->bmmio = 0x%p\n", dev->bmmio); 63 dprintk(DBGLVL_BUS, " .m_wMaxReqSize = 0x%x\n", b->m_wMaxReqSize); 64 dprintk(DBGLVL_BUS, " .m_pdwSetRing = 0x%p\n", b->m_pdwSetRing); 65 dprintk(DBGLVL_BUS, " .m_dwSizeSetRing = 0x%x\n", b->m_dwSizeSetRing); 66 dprintk(DBGLVL_BUS, " .m_pdwGetRing = 0x%p\n", b->m_pdwGetRing); 67 dprintk(DBGLVL_BUS, " .m_dwSizeGetRing = 0x%x\n", b->m_dwSizeGetRing); 69 dprintk(DBGLVL_BUS, " .m_dwSetReadPos = 0x%x (0x%08x)\n", 72 dprintk(DBGLVL_BU [all...] |
H A D | saa7164-cmd.c | 89 dprintk(DBGLVL_CMD, "%s()\n", __func__); 102 dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); 104 dprintk(DBGLVL_CMD, 142 dprintk(DBGLVL_CMD, "%s()\n", __func__); 156 dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); 179 dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n", 272 dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno); 285 dprintk(DBGLVL_CMD, 304 dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d " 319 dprintk(DBGLVL_CM [all...] |