1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License.  See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
7 * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
8 * Copyright (C) 1994, 1995, 1996, by Andreas Busse
9 * Copyright (C) 1999 Silicon Graphics, Inc.
10 * Copyright (C) 2000 MIPS Technologies, Inc.
11 *    written by Carsten Langgaard, carstenl@mips.com
12 */
13#include <asm/asm.h>
14#include <asm/cachectl.h>
15#include <asm/fpregdef.h>
16#include <asm/mipsregs.h>
17#include <asm/asm-offsets.h>
18#include <asm/pgtable-bits.h>
19#include <asm/regdef.h>
20#include <asm/stackframe.h>
21#include <asm/thread_info.h>
22
23#include <asm/asmmacro.h>
24
25/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
26#undef fp
27
28/*
29 * Offset to the current process status flags, the first 32 bytes of the
30 * stack are not used.
31 */
32#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
33
34#ifndef USE_ALTERNATE_RESUME_IMPL
35/*
36 * task_struct *resume(task_struct *prev, task_struct *next,
37 *		       struct thread_info *next_ti, s32 fp_save)
38 */
39	.align	5
40	LEAF(resume)
41	mfc0	t1, CP0_STATUS
42	LONG_S	t1, THREAD_STATUS(a0)
43	cpu_save_nonscratch a0
44	LONG_S	ra, THREAD_REG31(a0)
45
46	/*
47	 * Check whether we need to save any FP context. FP context is saved
48	 * iff the process has used the context with the scalar FPU or the MSA
49	 * ASE in the current time slice, as indicated by _TIF_USEDFPU and
50	 * _TIF_USEDMSA respectively. switch_to will have set fp_save
51	 * accordingly to an FP_SAVE_ enum value.
52	 */
53	beqz	a3, 2f
54
55	/*
56	 * We do. Clear the saved CU1 bit for prev, such that next time it is
57	 * scheduled it will start in userland with the FPU disabled. If the
58	 * task uses the FPU then it will be enabled again via the do_cpu trap.
59	 * This allows us to lazily restore the FP context.
60	 */
61	PTR_L	t3, TASK_THREAD_INFO(a0)
62	LONG_L	t0, ST_OFF(t3)
63	li	t1, ~ST0_CU1
64	and	t0, t0, t1
65	LONG_S	t0, ST_OFF(t3)
66
67	/* Check whether we're saving scalar or vector context. */
68	bgtz	a3, 1f
69
70	/* Save 128b MSA vector context + scalar FP control & status. */
71	.set push
72	SET_HARDFLOAT
73	cfc1	t1, fcr31
74	msa_save_all	a0
75	.set pop	/* SET_HARDFLOAT */
76
77	sw	t1, THREAD_FCR31(a0)
78	b	2f
79
801:	/* Save 32b/64b scalar FP context. */
81	fpu_save_double a0 t0 t1		# c0_status passed in t0
82						# clobbers t1
832:
84
85#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
86	PTR_LA	t8, __stack_chk_guard
87	LONG_L	t9, TASK_STACK_CANARY(a1)
88	LONG_S	t9, 0(t8)
89#endif
90
91	/*
92	 * The order of restoring the registers takes care of the race
93	 * updating $28, $29 and kernelsp without disabling ints.
94	 */
95	move	$28, a2
96	cpu_restore_nonscratch a1
97
98	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
99	set_saved_sp	t0, t1, t2
100	mfc0	t1, CP0_STATUS		/* Do we really need this? */
101	li	a3, 0xff01
102	and	t1, a3
103	LONG_L	a2, THREAD_STATUS(a1)
104	nor	a3, $0, a3
105	and	a2, a3
106	or	a2, t1
107	mtc0	a2, CP0_STATUS
108	move	v0, a0
109	jr	ra
110	END(resume)
111
112#endif /* USE_ALTERNATE_RESUME_IMPL */
113
114/*
115 * Save a thread's fp context.
116 */
117LEAF(_save_fp)
118#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
119	mfc0	t0, CP0_STATUS
120#endif
121	fpu_save_double a0 t0 t1		# clobbers t1
122	jr	ra
123	END(_save_fp)
124
125/*
126 * Restore a thread's fp context.
127 */
128LEAF(_restore_fp)
129#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
130	mfc0	t0, CP0_STATUS
131#endif
132	fpu_restore_double a0 t0 t1		# clobbers t1
133	jr	ra
134	END(_restore_fp)
135
136#ifdef CONFIG_CPU_HAS_MSA
137
138/*
139 * Save a thread's MSA vector context.
140 */
141LEAF(_save_msa)
142	msa_save_all	a0
143	jr	ra
144	END(_save_msa)
145
146/*
147 * Restore a thread's MSA vector context.
148 */
149LEAF(_restore_msa)
150	msa_restore_all	a0
151	jr	ra
152	END(_restore_msa)
153
154LEAF(_init_msa_upper)
155	msa_init_all_upper
156	jr	ra
157	END(_init_msa_upper)
158
159#endif
160
161/*
162 * Load the FPU with signalling NANS.  This bit pattern we're using has
163 * the property that no matter whether considered as single or as double
164 * precision represents signaling NANS.
165 *
166 * We initialize fcr31 to rounding to nearest, no exceptions.
167 */
168
169#define FPU_DEFAULT  0x00000000
170
171	.set push
172	SET_HARDFLOAT
173
174LEAF(_init_fpu)
175	mfc0	t0, CP0_STATUS
176	li	t1, ST0_CU1
177	or	t0, t1
178	mtc0	t0, CP0_STATUS
179	enable_fpu_hazard
180
181	li	t1, FPU_DEFAULT
182	ctc1	t1, fcr31
183
184	li	t1, -1				# SNaN
185
186#ifdef CONFIG_64BIT
187	sll	t0, t0, 5
188	bgez	t0, 1f				# 16 / 32 register mode?
189
190	dmtc1	t1, $f1
191	dmtc1	t1, $f3
192	dmtc1	t1, $f5
193	dmtc1	t1, $f7
194	dmtc1	t1, $f9
195	dmtc1	t1, $f11
196	dmtc1	t1, $f13
197	dmtc1	t1, $f15
198	dmtc1	t1, $f17
199	dmtc1	t1, $f19
200	dmtc1	t1, $f21
201	dmtc1	t1, $f23
202	dmtc1	t1, $f25
203	dmtc1	t1, $f27
204	dmtc1	t1, $f29
205	dmtc1	t1, $f31
2061:
207#endif
208
209#ifdef CONFIG_CPU_MIPS32
210	mtc1	t1, $f0
211	mtc1	t1, $f1
212	mtc1	t1, $f2
213	mtc1	t1, $f3
214	mtc1	t1, $f4
215	mtc1	t1, $f5
216	mtc1	t1, $f6
217	mtc1	t1, $f7
218	mtc1	t1, $f8
219	mtc1	t1, $f9
220	mtc1	t1, $f10
221	mtc1	t1, $f11
222	mtc1	t1, $f12
223	mtc1	t1, $f13
224	mtc1	t1, $f14
225	mtc1	t1, $f15
226	mtc1	t1, $f16
227	mtc1	t1, $f17
228	mtc1	t1, $f18
229	mtc1	t1, $f19
230	mtc1	t1, $f20
231	mtc1	t1, $f21
232	mtc1	t1, $f22
233	mtc1	t1, $f23
234	mtc1	t1, $f24
235	mtc1	t1, $f25
236	mtc1	t1, $f26
237	mtc1	t1, $f27
238	mtc1	t1, $f28
239	mtc1	t1, $f29
240	mtc1	t1, $f30
241	mtc1	t1, $f31
242
243#ifdef CONFIG_CPU_MIPS32_R2
244	.set    push
245	.set    mips32r2
246	.set	fp=64
247	sll     t0, t0, 5			# is Status.FR set?
248	bgez    t0, 1f				# no: skip setting upper 32b
249
250	mthc1   t1, $f0
251	mthc1   t1, $f1
252	mthc1   t1, $f2
253	mthc1   t1, $f3
254	mthc1   t1, $f4
255	mthc1   t1, $f5
256	mthc1   t1, $f6
257	mthc1   t1, $f7
258	mthc1   t1, $f8
259	mthc1   t1, $f9
260	mthc1   t1, $f10
261	mthc1   t1, $f11
262	mthc1   t1, $f12
263	mthc1   t1, $f13
264	mthc1   t1, $f14
265	mthc1   t1, $f15
266	mthc1   t1, $f16
267	mthc1   t1, $f17
268	mthc1   t1, $f18
269	mthc1   t1, $f19
270	mthc1   t1, $f20
271	mthc1   t1, $f21
272	mthc1   t1, $f22
273	mthc1   t1, $f23
274	mthc1   t1, $f24
275	mthc1   t1, $f25
276	mthc1   t1, $f26
277	mthc1   t1, $f27
278	mthc1   t1, $f28
279	mthc1   t1, $f29
280	mthc1   t1, $f30
281	mthc1   t1, $f31
2821:	.set    pop
283#endif /* CONFIG_CPU_MIPS32_R2 */
284#else
285	.set	arch=r4000
286	dmtc1	t1, $f0
287	dmtc1	t1, $f2
288	dmtc1	t1, $f4
289	dmtc1	t1, $f6
290	dmtc1	t1, $f8
291	dmtc1	t1, $f10
292	dmtc1	t1, $f12
293	dmtc1	t1, $f14
294	dmtc1	t1, $f16
295	dmtc1	t1, $f18
296	dmtc1	t1, $f20
297	dmtc1	t1, $f22
298	dmtc1	t1, $f24
299	dmtc1	t1, $f26
300	dmtc1	t1, $f28
301	dmtc1	t1, $f30
302#endif
303	jr	ra
304	END(_init_fpu)
305
306	.set pop	/* SET_HARDFLOAT */
307