setup_64.c revision 1f6a93e4c35e75d547b51f56ba8139ab1a91628c
1/* 2 * 3 * Common boot and setup code. 4 * 5 * Copyright (C) 2001 PPC64 Team, IBM Corp 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License 9 * as published by the Free Software Foundation; either version 10 * 2 of the License, or (at your option) any later version. 11 */ 12 13#undef DEBUG 14 15#include <linux/module.h> 16#include <linux/string.h> 17#include <linux/sched.h> 18#include <linux/init.h> 19#include <linux/kernel.h> 20#include <linux/reboot.h> 21#include <linux/delay.h> 22#include <linux/initrd.h> 23#include <linux/seq_file.h> 24#include <linux/ioport.h> 25#include <linux/console.h> 26#include <linux/utsname.h> 27#include <linux/tty.h> 28#include <linux/root_dev.h> 29#include <linux/notifier.h> 30#include <linux/cpu.h> 31#include <linux/unistd.h> 32#include <linux/serial.h> 33#include <linux/serial_8250.h> 34#include <linux/bootmem.h> 35#include <linux/pci.h> 36#include <linux/lockdep.h> 37#include <linux/lmb.h> 38#include <asm/io.h> 39#include <asm/kdump.h> 40#include <asm/prom.h> 41#include <asm/processor.h> 42#include <asm/pgtable.h> 43#include <asm/smp.h> 44#include <asm/elf.h> 45#include <asm/machdep.h> 46#include <asm/paca.h> 47#include <asm/time.h> 48#include <asm/cputable.h> 49#include <asm/sections.h> 50#include <asm/btext.h> 51#include <asm/nvram.h> 52#include <asm/setup.h> 53#include <asm/system.h> 54#include <asm/rtas.h> 55#include <asm/iommu.h> 56#include <asm/serial.h> 57#include <asm/cache.h> 58#include <asm/page.h> 59#include <asm/mmu.h> 60#include <asm/firmware.h> 61#include <asm/xmon.h> 62#include <asm/udbg.h> 63#include <asm/kexec.h> 64 65#include "setup.h" 66 67#ifdef DEBUG 68#define DBG(fmt...) udbg_printf(fmt) 69#else 70#define DBG(fmt...) 71#endif 72 73int have_of = 1; 74int boot_cpuid = 0; 75u64 ppc64_pft_size; 76 77/* Pick defaults since we might want to patch instructions 78 * before we've read this from the device tree. 79 */ 80struct ppc64_caches ppc64_caches = { 81 .dline_size = 0x40, 82 .log_dline_size = 6, 83 .iline_size = 0x40, 84 .log_iline_size = 6 85}; 86EXPORT_SYMBOL_GPL(ppc64_caches); 87 88/* 89 * These are used in binfmt_elf.c to put aux entries on the stack 90 * for each elf executable being started. 91 */ 92int dcache_bsize; 93int icache_bsize; 94int ucache_bsize; 95 96#ifdef CONFIG_SMP 97 98static int smt_enabled_cmdline; 99 100/* Look for ibm,smt-enabled OF option */ 101static void check_smt_enabled(void) 102{ 103 struct device_node *dn; 104 const char *smt_option; 105 106 /* Allow the command line to overrule the OF option */ 107 if (smt_enabled_cmdline) 108 return; 109 110 dn = of_find_node_by_path("/options"); 111 112 if (dn) { 113 smt_option = of_get_property(dn, "ibm,smt-enabled", NULL); 114 115 if (smt_option) { 116 if (!strcmp(smt_option, "on")) 117 smt_enabled_at_boot = 1; 118 else if (!strcmp(smt_option, "off")) 119 smt_enabled_at_boot = 0; 120 } 121 } 122} 123 124/* Look for smt-enabled= cmdline option */ 125static int __init early_smt_enabled(char *p) 126{ 127 smt_enabled_cmdline = 1; 128 129 if (!p) 130 return 0; 131 132 if (!strcmp(p, "on") || !strcmp(p, "1")) 133 smt_enabled_at_boot = 1; 134 else if (!strcmp(p, "off") || !strcmp(p, "0")) 135 smt_enabled_at_boot = 0; 136 137 return 0; 138} 139early_param("smt-enabled", early_smt_enabled); 140 141#else 142#define check_smt_enabled() 143#endif /* CONFIG_SMP */ 144 145/* Put the paca pointer into r13 and SPRG3 */ 146void __init setup_paca(int cpu) 147{ 148 local_paca = &paca[cpu]; 149 mtspr(SPRN_SPRG3, local_paca); 150} 151 152/* 153 * Early initialization entry point. This is called by head.S 154 * with MMU translation disabled. We rely on the "feature" of 155 * the CPU that ignores the top 2 bits of the address in real 156 * mode so we can access kernel globals normally provided we 157 * only toy with things in the RMO region. From here, we do 158 * some early parsing of the device-tree to setup out LMB 159 * data structures, and allocate & initialize the hash table 160 * and segment tables so we can start running with translation 161 * enabled. 162 * 163 * It is this function which will call the probe() callback of 164 * the various platform types and copy the matching one to the 165 * global ppc_md structure. Your platform can eventually do 166 * some very early initializations from the probe() routine, but 167 * this is not recommended, be very careful as, for example, the 168 * device-tree is not accessible via normal means at this point. 169 */ 170 171void __init early_setup(unsigned long dt_ptr) 172{ 173 /* -------- printk is _NOT_ safe to use here ! ------- */ 174 175 /* Fill in any unititialised pacas */ 176 initialise_pacas(); 177 178 /* Identify CPU type */ 179 identify_cpu(0, mfspr(SPRN_PVR)); 180 181 /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ 182 setup_paca(0); 183 184 /* Initialize lockdep early or else spinlocks will blow */ 185 lockdep_init(); 186 187 /* -------- printk is now safe to use ------- */ 188 189 /* Enable early debugging if any specified (see udbg.h) */ 190 udbg_early_init(); 191 192 DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr); 193 194 /* 195 * Do early initialization using the flattened device 196 * tree, such as retrieving the physical memory map or 197 * calculating/retrieving the hash table size. 198 */ 199 early_init_devtree(__va(dt_ptr)); 200 201 /* Now we know the logical id of our boot cpu, setup the paca. */ 202 setup_paca(boot_cpuid); 203 204 /* Fix up paca fields required for the boot cpu */ 205 get_paca()->cpu_start = 1; 206 get_paca()->stab_real = __pa((u64)&initial_stab); 207 get_paca()->stab_addr = (u64)&initial_stab; 208 209 /* Probe the machine type */ 210 probe_machine(); 211 212 setup_kdump_trampoline(); 213 214 DBG("Found, Initializing memory management...\n"); 215 216 /* 217 * Initialize the MMU Hash table and create the linear mapping 218 * of memory. Has to be done before stab/slb initialization as 219 * this is currently where the page size encoding is obtained 220 */ 221 htab_initialize(); 222 223 /* 224 * Initialize stab / SLB management except on iSeries 225 */ 226 if (cpu_has_feature(CPU_FTR_SLB)) 227 slb_initialize(); 228 else if (!firmware_has_feature(FW_FEATURE_ISERIES)) 229 stab_initialize(get_paca()->stab_real); 230 231 DBG(" <- early_setup()\n"); 232} 233 234#ifdef CONFIG_SMP 235void early_setup_secondary(void) 236{ 237 struct paca_struct *lpaca = get_paca(); 238 239 /* Mark interrupts enabled in PACA */ 240 lpaca->soft_enabled = 0; 241 242 /* Initialize hash table for that CPU */ 243 htab_initialize_secondary(); 244 245 /* Initialize STAB/SLB. We use a virtual address as it works 246 * in real mode on pSeries and we want a virutal address on 247 * iSeries anyway 248 */ 249 if (cpu_has_feature(CPU_FTR_SLB)) 250 slb_initialize(); 251 else 252 stab_initialize(lpaca->stab_addr); 253} 254 255#endif /* CONFIG_SMP */ 256 257#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) 258extern unsigned long __secondary_hold_spinloop; 259extern void generic_secondary_smp_init(void); 260 261void smp_release_cpus(void) 262{ 263 unsigned long *ptr; 264 265 DBG(" -> smp_release_cpus()\n"); 266 267 /* All secondary cpus are spinning on a common spinloop, release them 268 * all now so they can start to spin on their individual paca 269 * spinloops. For non SMP kernels, the secondary cpus never get out 270 * of the common spinloop. 271 */ 272 273 ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop 274 - PHYSICAL_START); 275 *ptr = __pa(generic_secondary_smp_init); 276 mb(); 277 278 DBG(" <- smp_release_cpus()\n"); 279} 280#endif /* CONFIG_SMP || CONFIG_KEXEC */ 281 282/* 283 * Initialize some remaining members of the ppc64_caches and systemcfg 284 * structures 285 * (at least until we get rid of them completely). This is mostly some 286 * cache informations about the CPU that will be used by cache flush 287 * routines and/or provided to userland 288 */ 289static void __init initialize_cache_info(void) 290{ 291 struct device_node *np; 292 unsigned long num_cpus = 0; 293 294 DBG(" -> initialize_cache_info()\n"); 295 296 for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) { 297 num_cpus += 1; 298 299 /* We're assuming *all* of the CPUs have the same 300 * d-cache and i-cache sizes... -Peter 301 */ 302 303 if ( num_cpus == 1 ) { 304 const u32 *sizep, *lsizep; 305 u32 size, lsize; 306 307 size = 0; 308 lsize = cur_cpu_spec->dcache_bsize; 309 sizep = of_get_property(np, "d-cache-size", NULL); 310 if (sizep != NULL) 311 size = *sizep; 312 lsizep = of_get_property(np, "d-cache-block-size", NULL); 313 /* fallback if block size missing */ 314 if (lsizep == NULL) 315 lsizep = of_get_property(np, "d-cache-line-size", NULL); 316 if (lsizep != NULL) 317 lsize = *lsizep; 318 if (sizep == 0 || lsizep == 0) 319 DBG("Argh, can't find dcache properties ! " 320 "sizep: %p, lsizep: %p\n", sizep, lsizep); 321 322 ppc64_caches.dsize = size; 323 ppc64_caches.dline_size = lsize; 324 ppc64_caches.log_dline_size = __ilog2(lsize); 325 ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; 326 327 size = 0; 328 lsize = cur_cpu_spec->icache_bsize; 329 sizep = of_get_property(np, "i-cache-size", NULL); 330 if (sizep != NULL) 331 size = *sizep; 332 lsizep = of_get_property(np, "i-cache-block-size", NULL); 333 if (lsizep == NULL) 334 lsizep = of_get_property(np, "i-cache-line-size", NULL); 335 if (lsizep != NULL) 336 lsize = *lsizep; 337 if (sizep == 0 || lsizep == 0) 338 DBG("Argh, can't find icache properties ! " 339 "sizep: %p, lsizep: %p\n", sizep, lsizep); 340 341 ppc64_caches.isize = size; 342 ppc64_caches.iline_size = lsize; 343 ppc64_caches.log_iline_size = __ilog2(lsize); 344 ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; 345 } 346 } 347 348 DBG(" <- initialize_cache_info()\n"); 349} 350 351 352/* 353 * Do some initial setup of the system. The parameters are those which 354 * were passed in from the bootloader. 355 */ 356void __init setup_system(void) 357{ 358 DBG(" -> setup_system()\n"); 359 360 /* Apply the CPUs-specific and firmware specific fixups to kernel 361 * text (nop out sections not relevant to this CPU or this firmware) 362 */ 363 do_feature_fixups(cur_cpu_spec->cpu_features, 364 &__start___ftr_fixup, &__stop___ftr_fixup); 365 do_feature_fixups(powerpc_firmware_features, 366 &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); 367 do_lwsync_fixups(cur_cpu_spec->cpu_features, 368 &__start___lwsync_fixup, &__stop___lwsync_fixup); 369 370 /* 371 * Unflatten the device-tree passed by prom_init or kexec 372 */ 373 unflatten_device_tree(); 374 375 /* 376 * Fill the ppc64_caches & systemcfg structures with informations 377 * retrieved from the device-tree. 378 */ 379 initialize_cache_info(); 380 381 /* 382 * Initialize irq remapping subsystem 383 */ 384 irq_early_init(); 385 386#ifdef CONFIG_PPC_RTAS 387 /* 388 * Initialize RTAS if available 389 */ 390 rtas_initialize(); 391#endif /* CONFIG_PPC_RTAS */ 392 393 /* 394 * Check if we have an initrd provided via the device-tree 395 */ 396 check_for_initrd(); 397 398 /* 399 * Do some platform specific early initializations, that includes 400 * setting up the hash table pointers. It also sets up some interrupt-mapping 401 * related options that will be used by finish_device_tree() 402 */ 403 if (ppc_md.init_early) 404 ppc_md.init_early(); 405 406 /* 407 * We can discover serial ports now since the above did setup the 408 * hash table management for us, thus ioremap works. We do that early 409 * so that further code can be debugged 410 */ 411 find_legacy_serial_ports(); 412 413 /* 414 * Register early console 415 */ 416 register_early_udbg_console(); 417 418 /* 419 * Initialize xmon 420 */ 421 xmon_setup(); 422 423 check_smt_enabled(); 424 smp_setup_cpu_maps(); 425 426#ifdef CONFIG_SMP 427 /* Release secondary cpus out of their spinloops at 0x60 now that 428 * we can map physical -> logical CPU ids 429 */ 430 smp_release_cpus(); 431#endif 432 433 printk("Starting Linux PPC64 %s\n", init_utsname()->version); 434 435 printk("-----------------------------------------------------\n"); 436 printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); 437 printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size()); 438 if (ppc64_caches.dline_size != 0x80) 439 printk("ppc64_caches.dcache_line_size = 0x%x\n", 440 ppc64_caches.dline_size); 441 if (ppc64_caches.iline_size != 0x80) 442 printk("ppc64_caches.icache_line_size = 0x%x\n", 443 ppc64_caches.iline_size); 444 if (htab_address) 445 printk("htab_address = 0x%p\n", htab_address); 446 printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); 447#if PHYSICAL_START > 0 448 printk("physical_start = 0x%lx\n", PHYSICAL_START); 449#endif 450 printk("-----------------------------------------------------\n"); 451 452 DBG(" <- setup_system()\n"); 453} 454 455#ifdef CONFIG_IRQSTACKS 456static void __init irqstack_early_init(void) 457{ 458 unsigned int i; 459 460 /* 461 * interrupt stacks must be under 256MB, we cannot afford to take 462 * SLB misses on them. 463 */ 464 for_each_possible_cpu(i) { 465 softirq_ctx[i] = (struct thread_info *) 466 __va(lmb_alloc_base(THREAD_SIZE, 467 THREAD_SIZE, 0x10000000)); 468 hardirq_ctx[i] = (struct thread_info *) 469 __va(lmb_alloc_base(THREAD_SIZE, 470 THREAD_SIZE, 0x10000000)); 471 } 472} 473#else 474#define irqstack_early_init() 475#endif 476 477/* 478 * Stack space used when we detect a bad kernel stack pointer, and 479 * early in SMP boots before relocation is enabled. 480 */ 481static void __init emergency_stack_init(void) 482{ 483 unsigned long limit; 484 unsigned int i; 485 486 /* 487 * Emergency stacks must be under 256MB, we cannot afford to take 488 * SLB misses on them. The ABI also requires them to be 128-byte 489 * aligned. 490 * 491 * Since we use these as temporary stacks during secondary CPU 492 * bringup, we need to get at them in real mode. This means they 493 * must also be within the RMO region. 494 */ 495 limit = min(0x10000000UL, lmb.rmo_size); 496 497 for_each_possible_cpu(i) { 498 unsigned long sp; 499 sp = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); 500 sp += THREAD_SIZE; 501 paca[i].emergency_sp = __va(sp); 502 } 503} 504 505/* 506 * Called into from start_kernel, after lock_kernel has been called. 507 * Initializes bootmem, which is unsed to manage page allocation until 508 * mem_init is called. 509 */ 510void __init setup_arch(char **cmdline_p) 511{ 512 ppc64_boot_msg(0x12, "Setup Arch"); 513 514 *cmdline_p = cmd_line; 515 516 /* 517 * Set cache line size based on type of cpu as a default. 518 * Systems with OF can look in the properties on the cpu node(s) 519 * for a possibly more accurate value. 520 */ 521 dcache_bsize = ppc64_caches.dline_size; 522 icache_bsize = ppc64_caches.iline_size; 523 524 /* reboot on panic */ 525 panic_timeout = 180; 526 527 if (ppc_md.panic) 528 setup_panic(); 529 530 init_mm.start_code = (unsigned long)_stext; 531 init_mm.end_code = (unsigned long) _etext; 532 init_mm.end_data = (unsigned long) _edata; 533 init_mm.brk = klimit; 534 535 irqstack_early_init(); 536 emergency_stack_init(); 537 538 stabs_alloc(); 539 540 /* set up the bootmem stuff with available memory */ 541 do_init_bootmem(); 542 sparse_init(); 543 544#ifdef CONFIG_DUMMY_CONSOLE 545 conswitchp = &dummy_con; 546#endif 547 548 if (ppc_md.setup_arch) 549 ppc_md.setup_arch(); 550 551 paging_init(); 552 ppc64_boot_msg(0x15, "Setup Done"); 553} 554 555 556/* ToDo: do something useful if ppc_md is not yet setup. */ 557#define PPC64_LINUX_FUNCTION 0x0f000000 558#define PPC64_IPL_MESSAGE 0xc0000000 559#define PPC64_TERM_MESSAGE 0xb0000000 560 561static void ppc64_do_msg(unsigned int src, const char *msg) 562{ 563 if (ppc_md.progress) { 564 char buf[128]; 565 566 sprintf(buf, "%08X\n", src); 567 ppc_md.progress(buf, 0); 568 snprintf(buf, 128, "%s", msg); 569 ppc_md.progress(buf, 0); 570 } 571} 572 573/* Print a boot progress message. */ 574void ppc64_boot_msg(unsigned int src, const char *msg) 575{ 576 ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg); 577 printk("[boot]%04x %s\n", src, msg); 578} 579 580/* Print a termination message (print only -- does not stop the kernel) */ 581void ppc64_terminate_msg(unsigned int src, const char *msg) 582{ 583 ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg); 584 printk("[terminate]%04x %s\n", src, msg); 585} 586 587void cpu_die(void) 588{ 589 if (ppc_md.cpu_die) 590 ppc_md.cpu_die(); 591} 592 593#ifdef CONFIG_SMP 594void __init setup_per_cpu_areas(void) 595{ 596 int i; 597 unsigned long size; 598 char *ptr; 599 600 /* Copy section for each CPU (we discard the original) */ 601 size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); 602#ifdef CONFIG_MODULES 603 if (size < PERCPU_ENOUGH_ROOM) 604 size = PERCPU_ENOUGH_ROOM; 605#endif 606 607 for_each_possible_cpu(i) { 608 ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); 609 if (!ptr) 610 panic("Cannot allocate cpu data for CPU %d\n", i); 611 612 paca[i].data_offset = ptr - __per_cpu_start; 613 memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); 614 } 615} 616#endif 617 618 619#ifdef CONFIG_PPC_INDIRECT_IO 620struct ppc_pci_io ppc_pci_io; 621EXPORT_SYMBOL(ppc_pci_io); 622#endif /* CONFIG_PPC_INDIRECT_IO */ 623 624