1/****************************************************************************** 2 * 3 * Module Name: utaddress - op_region address range check 4 * 5 *****************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2014, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#include <acpi/acpi.h> 45#include "accommon.h" 46#include "acnamesp.h" 47 48#define _COMPONENT ACPI_UTILITIES 49ACPI_MODULE_NAME("utaddress") 50 51/******************************************************************************* 52 * 53 * FUNCTION: acpi_ut_add_address_range 54 * 55 * PARAMETERS: space_id - Address space ID 56 * address - op_region start address 57 * length - op_region length 58 * region_node - op_region namespace node 59 * 60 * RETURN: Status 61 * 62 * DESCRIPTION: Add the Operation Region address range to the global list. 63 * The only supported Space IDs are Memory and I/O. Called when 64 * the op_region address/length operands are fully evaluated. 65 * 66 * MUTEX: Locks the namespace 67 * 68 * NOTE: Because this interface is only called when an op_region argument 69 * list is evaluated, there cannot be any duplicate region_nodes. 70 * Duplicate Address/Length values are allowed, however, so that multiple 71 * address conflicts can be detected. 72 * 73 ******************************************************************************/ 74acpi_status 75acpi_ut_add_address_range(acpi_adr_space_type space_id, 76 acpi_physical_address address, 77 u32 length, struct acpi_namespace_node *region_node) 78{ 79 struct acpi_address_range *range_info; 80 acpi_status status; 81 82 ACPI_FUNCTION_TRACE(ut_add_address_range); 83 84 if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 85 (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { 86 return_ACPI_STATUS(AE_OK); 87 } 88 89 /* Allocate/init a new info block, add it to the appropriate list */ 90 91 range_info = ACPI_ALLOCATE(sizeof(struct acpi_address_range)); 92 if (!range_info) { 93 return_ACPI_STATUS(AE_NO_MEMORY); 94 } 95 96 range_info->start_address = address; 97 range_info->end_address = (address + length - 1); 98 range_info->region_node = region_node; 99 100 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); 101 if (ACPI_FAILURE(status)) { 102 ACPI_FREE(range_info); 103 return_ACPI_STATUS(status); 104 } 105 106 range_info->next = acpi_gbl_address_range_list[space_id]; 107 acpi_gbl_address_range_list[space_id] = range_info; 108 109 ACPI_DEBUG_PRINT((ACPI_DB_NAMES, 110 "\nAdded [%4.4s] address range: 0x%p-0x%p\n", 111 acpi_ut_get_node_name(range_info->region_node), 112 ACPI_CAST_PTR(void, address), 113 ACPI_CAST_PTR(void, range_info->end_address))); 114 115 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); 116 return_ACPI_STATUS(AE_OK); 117} 118 119/******************************************************************************* 120 * 121 * FUNCTION: acpi_ut_remove_address_range 122 * 123 * PARAMETERS: space_id - Address space ID 124 * region_node - op_region namespace node 125 * 126 * RETURN: None 127 * 128 * DESCRIPTION: Remove the Operation Region from the global list. The only 129 * supported Space IDs are Memory and I/O. Called when an 130 * op_region is deleted. 131 * 132 * MUTEX: Assumes the namespace is locked 133 * 134 ******************************************************************************/ 135 136void 137acpi_ut_remove_address_range(acpi_adr_space_type space_id, 138 struct acpi_namespace_node *region_node) 139{ 140 struct acpi_address_range *range_info; 141 struct acpi_address_range *prev; 142 143 ACPI_FUNCTION_TRACE(ut_remove_address_range); 144 145 if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 146 (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { 147 return_VOID; 148 } 149 150 /* Get the appropriate list head and check the list */ 151 152 range_info = prev = acpi_gbl_address_range_list[space_id]; 153 while (range_info) { 154 if (range_info->region_node == region_node) { 155 if (range_info == prev) { /* Found at list head */ 156 acpi_gbl_address_range_list[space_id] = 157 range_info->next; 158 } else { 159 prev->next = range_info->next; 160 } 161 162 ACPI_DEBUG_PRINT((ACPI_DB_NAMES, 163 "\nRemoved [%4.4s] address range: 0x%p-0x%p\n", 164 acpi_ut_get_node_name(range_info-> 165 region_node), 166 ACPI_CAST_PTR(void, 167 range_info-> 168 start_address), 169 ACPI_CAST_PTR(void, 170 range_info-> 171 end_address))); 172 173 ACPI_FREE(range_info); 174 return_VOID; 175 } 176 177 prev = range_info; 178 range_info = range_info->next; 179 } 180 181 return_VOID; 182} 183 184/******************************************************************************* 185 * 186 * FUNCTION: acpi_ut_check_address_range 187 * 188 * PARAMETERS: space_id - Address space ID 189 * address - Start address 190 * length - Length of address range 191 * warn - TRUE if warning on overlap desired 192 * 193 * RETURN: Count of the number of conflicts detected. Zero is always 194 * returned for Space IDs other than Memory or I/O. 195 * 196 * DESCRIPTION: Check if the input address range overlaps any of the 197 * ASL operation region address ranges. The only supported 198 * Space IDs are Memory and I/O. 199 * 200 * MUTEX: Assumes the namespace is locked. 201 * 202 ******************************************************************************/ 203 204u32 205acpi_ut_check_address_range(acpi_adr_space_type space_id, 206 acpi_physical_address address, u32 length, u8 warn) 207{ 208 struct acpi_address_range *range_info; 209 acpi_physical_address end_address; 210 char *pathname; 211 u32 overlap_count = 0; 212 213 ACPI_FUNCTION_TRACE(ut_check_address_range); 214 215 if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 216 (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { 217 return_UINT32(0); 218 } 219 220 range_info = acpi_gbl_address_range_list[space_id]; 221 end_address = address + length - 1; 222 223 /* Check entire list for all possible conflicts */ 224 225 while (range_info) { 226 /* 227 * Check if the requested address/length overlaps this 228 * address range. There are four cases to consider: 229 * 230 * 1) Input address/length is contained completely in the 231 * address range 232 * 2) Input address/length overlaps range at the range start 233 * 3) Input address/length overlaps range at the range end 234 * 4) Input address/length completely encompasses the range 235 */ 236 if ((address <= range_info->end_address) && 237 (end_address >= range_info->start_address)) { 238 239 /* Found an address range overlap */ 240 241 overlap_count++; 242 if (warn) { /* Optional warning message */ 243 pathname = 244 acpi_ns_get_external_pathname(range_info-> 245 region_node); 246 247 ACPI_WARNING((AE_INFO, 248 "%s range 0x%p-0x%p conflicts with OpRegion 0x%p-0x%p (%s)", 249 acpi_ut_get_region_name(space_id), 250 ACPI_CAST_PTR(void, address), 251 ACPI_CAST_PTR(void, end_address), 252 ACPI_CAST_PTR(void, 253 range_info-> 254 start_address), 255 ACPI_CAST_PTR(void, 256 range_info-> 257 end_address), 258 pathname)); 259 ACPI_FREE(pathname); 260 } 261 } 262 263 range_info = range_info->next; 264 } 265 266 return_UINT32(overlap_count); 267} 268 269/******************************************************************************* 270 * 271 * FUNCTION: acpi_ut_delete_address_lists 272 * 273 * PARAMETERS: None 274 * 275 * RETURN: None 276 * 277 * DESCRIPTION: Delete all global address range lists (called during 278 * subsystem shutdown). 279 * 280 ******************************************************************************/ 281 282void acpi_ut_delete_address_lists(void) 283{ 284 struct acpi_address_range *next; 285 struct acpi_address_range *range_info; 286 int i; 287 288 /* Delete all elements in all address range lists */ 289 290 for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) { 291 next = acpi_gbl_address_range_list[i]; 292 293 while (next) { 294 range_info = next; 295 next = range_info->next; 296 ACPI_FREE(range_info); 297 } 298 299 acpi_gbl_address_range_list[i] = NULL; 300 } 301} 302