powernow-k8.c revision 6889125b8b4e09c5e53e6ecab3433bed1ce198c9
1/* 2 * (c) 2003-2012 Advanced Micro Devices, Inc. 3 * Your use of this code is subject to the terms and conditions of the 4 * GNU general public license version 2. See "COPYING" or 5 * http://www.gnu.org/licenses/gpl.html 6 * 7 * Maintainer: 8 * Andreas Herrmann <andreas.herrmann3@amd.com> 9 * 10 * Based on the powernow-k7.c module written by Dave Jones. 11 * (C) 2003 Dave Jones on behalf of SuSE Labs 12 * (C) 2004 Dominik Brodowski <linux@brodo.de> 13 * (C) 2004 Pavel Machek <pavel@ucw.cz> 14 * Licensed under the terms of the GNU GPL License version 2. 15 * Based upon datasheets & sample CPUs kindly provided by AMD. 16 * 17 * Valuable input gratefully received from Dave Jones, Pavel Machek, 18 * Dominik Brodowski, Jacob Shin, and others. 19 * Originally developed by Paul Devriendt. 20 * 21 * Processor information obtained from Chapter 9 (Power and Thermal 22 * Management) of the "BIOS and Kernel Developer's Guide (BKDG) for 23 * the AMD Athlon 64 and AMD Opteron Processors" and section "2.x 24 * Power Management" in BKDGs for newer AMD CPU families. 25 * 26 * Tables for specific CPUs can be inferred from AMD's processor 27 * power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf) 28 */ 29 30#include <linux/kernel.h> 31#include <linux/smp.h> 32#include <linux/module.h> 33#include <linux/init.h> 34#include <linux/cpufreq.h> 35#include <linux/slab.h> 36#include <linux/string.h> 37#include <linux/cpumask.h> 38#include <linux/io.h> 39#include <linux/delay.h> 40 41#include <asm/msr.h> 42#include <asm/cpu_device_id.h> 43 44#include <linux/acpi.h> 45#include <linux/mutex.h> 46#include <acpi/processor.h> 47 48#define PFX "powernow-k8: " 49#define VERSION "version 2.20.00" 50#include "powernow-k8.h" 51#include "mperf.h" 52 53/* serialize freq changes */ 54static DEFINE_MUTEX(fidvid_mutex); 55 56static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); 57 58static int cpu_family = CPU_OPTERON; 59 60/* array to map SW pstate number to acpi state */ 61static u32 ps_to_as[8]; 62 63/* core performance boost */ 64static bool cpb_capable, cpb_enabled; 65static struct msr __percpu *msrs; 66 67static struct cpufreq_driver cpufreq_amd64_driver; 68 69#ifndef CONFIG_SMP 70static inline const struct cpumask *cpu_core_mask(int cpu) 71{ 72 return cpumask_of(0); 73} 74#endif 75 76/* Return a frequency in MHz, given an input fid */ 77static u32 find_freq_from_fid(u32 fid) 78{ 79 return 800 + (fid * 100); 80} 81 82/* Return a frequency in KHz, given an input fid */ 83static u32 find_khz_freq_from_fid(u32 fid) 84{ 85 return 1000 * find_freq_from_fid(fid); 86} 87 88static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, 89 u32 pstate) 90{ 91 return data[ps_to_as[pstate]].frequency; 92} 93 94/* Return the vco fid for an input fid 95 * 96 * Each "low" fid has corresponding "high" fid, and you can get to "low" fids 97 * only from corresponding high fids. This returns "high" fid corresponding to 98 * "low" one. 99 */ 100static u32 convert_fid_to_vco_fid(u32 fid) 101{ 102 if (fid < HI_FID_TABLE_BOTTOM) 103 return 8 + (2 * fid); 104 else 105 return fid; 106} 107 108/* 109 * Return 1 if the pending bit is set. Unless we just instructed the processor 110 * to transition to a new state, seeing this bit set is really bad news. 111 */ 112static int pending_bit_stuck(void) 113{ 114 u32 lo, hi; 115 116 if (cpu_family == CPU_HW_PSTATE) 117 return 0; 118 119 rdmsr(MSR_FIDVID_STATUS, lo, hi); 120 return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; 121} 122 123/* 124 * Update the global current fid / vid values from the status msr. 125 * Returns 1 on error. 126 */ 127static int query_current_values_with_pending_wait(struct powernow_k8_data *data) 128{ 129 u32 lo, hi; 130 u32 i = 0; 131 132 if (cpu_family == CPU_HW_PSTATE) { 133 rdmsr(MSR_PSTATE_STATUS, lo, hi); 134 i = lo & HW_PSTATE_MASK; 135 data->currpstate = i; 136 137 /* 138 * a workaround for family 11h erratum 311 might cause 139 * an "out-of-range Pstate if the core is in Pstate-0 140 */ 141 if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps)) 142 data->currpstate = HW_PSTATE_0; 143 144 return 0; 145 } 146 do { 147 if (i++ > 10000) { 148 pr_debug("detected change pending stuck\n"); 149 return 1; 150 } 151 rdmsr(MSR_FIDVID_STATUS, lo, hi); 152 } while (lo & MSR_S_LO_CHANGE_PENDING); 153 154 data->currvid = hi & MSR_S_HI_CURRENT_VID; 155 data->currfid = lo & MSR_S_LO_CURRENT_FID; 156 157 return 0; 158} 159 160/* the isochronous relief time */ 161static void count_off_irt(struct powernow_k8_data *data) 162{ 163 udelay((1 << data->irt) * 10); 164 return; 165} 166 167/* the voltage stabilization time */ 168static void count_off_vst(struct powernow_k8_data *data) 169{ 170 udelay(data->vstable * VST_UNITS_20US); 171 return; 172} 173 174/* need to init the control msr to a safe value (for each cpu) */ 175static void fidvid_msr_init(void) 176{ 177 u32 lo, hi; 178 u8 fid, vid; 179 180 rdmsr(MSR_FIDVID_STATUS, lo, hi); 181 vid = hi & MSR_S_HI_CURRENT_VID; 182 fid = lo & MSR_S_LO_CURRENT_FID; 183 lo = fid | (vid << MSR_C_LO_VID_SHIFT); 184 hi = MSR_C_HI_STP_GNT_BENIGN; 185 pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); 186 wrmsr(MSR_FIDVID_CTL, lo, hi); 187} 188 189/* write the new fid value along with the other control fields to the msr */ 190static int write_new_fid(struct powernow_k8_data *data, u32 fid) 191{ 192 u32 lo; 193 u32 savevid = data->currvid; 194 u32 i = 0; 195 196 if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { 197 printk(KERN_ERR PFX "internal error - overflow on fid write\n"); 198 return 1; 199 } 200 201 lo = fid; 202 lo |= (data->currvid << MSR_C_LO_VID_SHIFT); 203 lo |= MSR_C_LO_INIT_FID_VID; 204 205 pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n", 206 fid, lo, data->plllock * PLL_LOCK_CONVERSION); 207 208 do { 209 wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); 210 if (i++ > 100) { 211 printk(KERN_ERR PFX 212 "Hardware error - pending bit very stuck - " 213 "no further pstate changes possible\n"); 214 return 1; 215 } 216 } while (query_current_values_with_pending_wait(data)); 217 218 count_off_irt(data); 219 220 if (savevid != data->currvid) { 221 printk(KERN_ERR PFX 222 "vid change on fid trans, old 0x%x, new 0x%x\n", 223 savevid, data->currvid); 224 return 1; 225 } 226 227 if (fid != data->currfid) { 228 printk(KERN_ERR PFX 229 "fid trans failed, fid 0x%x, curr 0x%x\n", fid, 230 data->currfid); 231 return 1; 232 } 233 234 return 0; 235} 236 237/* Write a new vid to the hardware */ 238static int write_new_vid(struct powernow_k8_data *data, u32 vid) 239{ 240 u32 lo; 241 u32 savefid = data->currfid; 242 int i = 0; 243 244 if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { 245 printk(KERN_ERR PFX "internal error - overflow on vid write\n"); 246 return 1; 247 } 248 249 lo = data->currfid; 250 lo |= (vid << MSR_C_LO_VID_SHIFT); 251 lo |= MSR_C_LO_INIT_FID_VID; 252 253 pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n", 254 vid, lo, STOP_GRANT_5NS); 255 256 do { 257 wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); 258 if (i++ > 100) { 259 printk(KERN_ERR PFX "internal error - pending bit " 260 "very stuck - no further pstate " 261 "changes possible\n"); 262 return 1; 263 } 264 } while (query_current_values_with_pending_wait(data)); 265 266 if (savefid != data->currfid) { 267 printk(KERN_ERR PFX "fid changed on vid trans, old " 268 "0x%x new 0x%x\n", 269 savefid, data->currfid); 270 return 1; 271 } 272 273 if (vid != data->currvid) { 274 printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " 275 "curr 0x%x\n", 276 vid, data->currvid); 277 return 1; 278 } 279 280 return 0; 281} 282 283/* 284 * Reduce the vid by the max of step or reqvid. 285 * Decreasing vid codes represent increasing voltages: 286 * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. 287 */ 288static int decrease_vid_code_by_step(struct powernow_k8_data *data, 289 u32 reqvid, u32 step) 290{ 291 if ((data->currvid - reqvid) > step) 292 reqvid = data->currvid - step; 293 294 if (write_new_vid(data, reqvid)) 295 return 1; 296 297 count_off_vst(data); 298 299 return 0; 300} 301 302/* Change hardware pstate by single MSR write */ 303static int transition_pstate(struct powernow_k8_data *data, u32 pstate) 304{ 305 wrmsr(MSR_PSTATE_CTRL, pstate, 0); 306 data->currpstate = pstate; 307 return 0; 308} 309 310/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ 311static int transition_fid_vid(struct powernow_k8_data *data, 312 u32 reqfid, u32 reqvid) 313{ 314 if (core_voltage_pre_transition(data, reqvid, reqfid)) 315 return 1; 316 317 if (core_frequency_transition(data, reqfid)) 318 return 1; 319 320 if (core_voltage_post_transition(data, reqvid)) 321 return 1; 322 323 if (query_current_values_with_pending_wait(data)) 324 return 1; 325 326 if ((reqfid != data->currfid) || (reqvid != data->currvid)) { 327 printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " 328 "curr 0x%x 0x%x\n", 329 smp_processor_id(), 330 reqfid, reqvid, data->currfid, data->currvid); 331 return 1; 332 } 333 334 pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", 335 smp_processor_id(), data->currfid, data->currvid); 336 337 return 0; 338} 339 340/* Phase 1 - core voltage transition ... setup voltage */ 341static int core_voltage_pre_transition(struct powernow_k8_data *data, 342 u32 reqvid, u32 reqfid) 343{ 344 u32 rvosteps = data->rvo; 345 u32 savefid = data->currfid; 346 u32 maxvid, lo, rvomult = 1; 347 348 pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " 349 "reqvid 0x%x, rvo 0x%x\n", 350 smp_processor_id(), 351 data->currfid, data->currvid, reqvid, data->rvo); 352 353 if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) 354 rvomult = 2; 355 rvosteps *= rvomult; 356 rdmsr(MSR_FIDVID_STATUS, lo, maxvid); 357 maxvid = 0x1f & (maxvid >> 16); 358 pr_debug("ph1 maxvid=0x%x\n", maxvid); 359 if (reqvid < maxvid) /* lower numbers are higher voltages */ 360 reqvid = maxvid; 361 362 while (data->currvid > reqvid) { 363 pr_debug("ph1: curr 0x%x, req vid 0x%x\n", 364 data->currvid, reqvid); 365 if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) 366 return 1; 367 } 368 369 while ((rvosteps > 0) && 370 ((rvomult * data->rvo + data->currvid) > reqvid)) { 371 if (data->currvid == maxvid) { 372 rvosteps = 0; 373 } else { 374 pr_debug("ph1: changing vid for rvo, req 0x%x\n", 375 data->currvid - 1); 376 if (decrease_vid_code_by_step(data, data->currvid-1, 1)) 377 return 1; 378 rvosteps--; 379 } 380 } 381 382 if (query_current_values_with_pending_wait(data)) 383 return 1; 384 385 if (savefid != data->currfid) { 386 printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", 387 data->currfid); 388 return 1; 389 } 390 391 pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n", 392 data->currfid, data->currvid); 393 394 return 0; 395} 396 397/* Phase 2 - core frequency transition */ 398static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) 399{ 400 u32 vcoreqfid, vcocurrfid, vcofiddiff; 401 u32 fid_interval, savevid = data->currvid; 402 403 if (data->currfid == reqfid) { 404 printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", 405 data->currfid); 406 return 0; 407 } 408 409 pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " 410 "reqfid 0x%x\n", 411 smp_processor_id(), 412 data->currfid, data->currvid, reqfid); 413 414 vcoreqfid = convert_fid_to_vco_fid(reqfid); 415 vcocurrfid = convert_fid_to_vco_fid(data->currfid); 416 vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid 417 : vcoreqfid - vcocurrfid; 418 419 if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) 420 vcofiddiff = 0; 421 422 while (vcofiddiff > 2) { 423 (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); 424 425 if (reqfid > data->currfid) { 426 if (data->currfid > LO_FID_TABLE_TOP) { 427 if (write_new_fid(data, 428 data->currfid + fid_interval)) 429 return 1; 430 } else { 431 if (write_new_fid 432 (data, 433 2 + convert_fid_to_vco_fid(data->currfid))) 434 return 1; 435 } 436 } else { 437 if (write_new_fid(data, data->currfid - fid_interval)) 438 return 1; 439 } 440 441 vcocurrfid = convert_fid_to_vco_fid(data->currfid); 442 vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid 443 : vcoreqfid - vcocurrfid; 444 } 445 446 if (write_new_fid(data, reqfid)) 447 return 1; 448 449 if (query_current_values_with_pending_wait(data)) 450 return 1; 451 452 if (data->currfid != reqfid) { 453 printk(KERN_ERR PFX 454 "ph2: mismatch, failed fid transition, " 455 "curr 0x%x, req 0x%x\n", 456 data->currfid, reqfid); 457 return 1; 458 } 459 460 if (savevid != data->currvid) { 461 printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n", 462 savevid, data->currvid); 463 return 1; 464 } 465 466 pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n", 467 data->currfid, data->currvid); 468 469 return 0; 470} 471 472/* Phase 3 - core voltage transition flow ... jump to the final vid. */ 473static int core_voltage_post_transition(struct powernow_k8_data *data, 474 u32 reqvid) 475{ 476 u32 savefid = data->currfid; 477 u32 savereqvid = reqvid; 478 479 pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", 480 smp_processor_id(), 481 data->currfid, data->currvid); 482 483 if (reqvid != data->currvid) { 484 if (write_new_vid(data, reqvid)) 485 return 1; 486 487 if (savefid != data->currfid) { 488 printk(KERN_ERR PFX 489 "ph3: bad fid change, save 0x%x, curr 0x%x\n", 490 savefid, data->currfid); 491 return 1; 492 } 493 494 if (data->currvid != reqvid) { 495 printk(KERN_ERR PFX 496 "ph3: failed vid transition\n, " 497 "req 0x%x, curr 0x%x", 498 reqvid, data->currvid); 499 return 1; 500 } 501 } 502 503 if (query_current_values_with_pending_wait(data)) 504 return 1; 505 506 if (savereqvid != data->currvid) { 507 pr_debug("ph3 failed, currvid 0x%x\n", data->currvid); 508 return 1; 509 } 510 511 if (savefid != data->currfid) { 512 pr_debug("ph3 failed, currfid changed 0x%x\n", 513 data->currfid); 514 return 1; 515 } 516 517 pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n", 518 data->currfid, data->currvid); 519 520 return 0; 521} 522 523static const struct x86_cpu_id powernow_k8_ids[] = { 524 /* IO based frequency switching */ 525 { X86_VENDOR_AMD, 0xf }, 526 /* MSR based frequency switching supported */ 527 X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), 528 {} 529}; 530MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids); 531 532static void check_supported_cpu(void *_rc) 533{ 534 u32 eax, ebx, ecx, edx; 535 int *rc = _rc; 536 537 *rc = -ENODEV; 538 539 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); 540 541 if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { 542 if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || 543 ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { 544 printk(KERN_INFO PFX 545 "Processor cpuid %x not supported\n", eax); 546 return; 547 } 548 549 eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); 550 if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { 551 printk(KERN_INFO PFX 552 "No frequency change capabilities detected\n"); 553 return; 554 } 555 556 cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); 557 if ((edx & P_STATE_TRANSITION_CAPABLE) 558 != P_STATE_TRANSITION_CAPABLE) { 559 printk(KERN_INFO PFX 560 "Power state transitions not supported\n"); 561 return; 562 } 563 } else { /* must be a HW Pstate capable processor */ 564 cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); 565 if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) 566 cpu_family = CPU_HW_PSTATE; 567 else 568 return; 569 } 570 571 *rc = 0; 572} 573 574static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, 575 u8 maxvid) 576{ 577 unsigned int j; 578 u8 lastfid = 0xff; 579 580 for (j = 0; j < data->numps; j++) { 581 if (pst[j].vid > LEAST_VID) { 582 printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n", 583 j, pst[j].vid); 584 return -EINVAL; 585 } 586 if (pst[j].vid < data->rvo) { 587 /* vid + rvo >= 0 */ 588 printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" 589 " %d\n", j); 590 return -ENODEV; 591 } 592 if (pst[j].vid < maxvid + data->rvo) { 593 /* vid + rvo >= maxvid */ 594 printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" 595 " %d\n", j); 596 return -ENODEV; 597 } 598 if (pst[j].fid > MAX_FID) { 599 printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate" 600 " %d\n", j); 601 return -ENODEV; 602 } 603 if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { 604 /* Only first fid is allowed to be in "low" range */ 605 printk(KERN_ERR FW_BUG PFX "two low fids - %d : " 606 "0x%x\n", j, pst[j].fid); 607 return -EINVAL; 608 } 609 if (pst[j].fid < lastfid) 610 lastfid = pst[j].fid; 611 } 612 if (lastfid & 1) { 613 printk(KERN_ERR FW_BUG PFX "lastfid invalid\n"); 614 return -EINVAL; 615 } 616 if (lastfid > LO_FID_TABLE_TOP) 617 printk(KERN_INFO FW_BUG PFX 618 "first fid not from lo freq table\n"); 619 620 return 0; 621} 622 623static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, 624 unsigned int entry) 625{ 626 powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; 627} 628 629static void print_basics(struct powernow_k8_data *data) 630{ 631 int j; 632 for (j = 0; j < data->numps; j++) { 633 if (data->powernow_table[j].frequency != 634 CPUFREQ_ENTRY_INVALID) { 635 if (cpu_family == CPU_HW_PSTATE) { 636 printk(KERN_INFO PFX 637 " %d : pstate %d (%d MHz)\n", j, 638 data->powernow_table[j].index, 639 data->powernow_table[j].frequency/1000); 640 } else { 641 printk(KERN_INFO PFX 642 "fid 0x%x (%d MHz), vid 0x%x\n", 643 data->powernow_table[j].index & 0xff, 644 data->powernow_table[j].frequency/1000, 645 data->powernow_table[j].index >> 8); 646 } 647 } 648 } 649 if (data->batps) 650 printk(KERN_INFO PFX "Only %d pstates on battery\n", 651 data->batps); 652} 653 654static u32 freq_from_fid_did(u32 fid, u32 did) 655{ 656 u32 mhz = 0; 657 658 if (boot_cpu_data.x86 == 0x10) 659 mhz = (100 * (fid + 0x10)) >> did; 660 else if (boot_cpu_data.x86 == 0x11) 661 mhz = (100 * (fid + 8)) >> did; 662 else 663 BUG(); 664 665 return mhz * 1000; 666} 667 668static int fill_powernow_table(struct powernow_k8_data *data, 669 struct pst_s *pst, u8 maxvid) 670{ 671 struct cpufreq_frequency_table *powernow_table; 672 unsigned int j; 673 674 if (data->batps) { 675 /* use ACPI support to get full speed on mains power */ 676 printk(KERN_WARNING PFX 677 "Only %d pstates usable (use ACPI driver for full " 678 "range\n", data->batps); 679 data->numps = data->batps; 680 } 681 682 for (j = 1; j < data->numps; j++) { 683 if (pst[j-1].fid >= pst[j].fid) { 684 printk(KERN_ERR PFX "PST out of sequence\n"); 685 return -EINVAL; 686 } 687 } 688 689 if (data->numps < 2) { 690 printk(KERN_ERR PFX "no p states to transition\n"); 691 return -ENODEV; 692 } 693 694 if (check_pst_table(data, pst, maxvid)) 695 return -EINVAL; 696 697 powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) 698 * (data->numps + 1)), GFP_KERNEL); 699 if (!powernow_table) { 700 printk(KERN_ERR PFX "powernow_table memory alloc failure\n"); 701 return -ENOMEM; 702 } 703 704 for (j = 0; j < data->numps; j++) { 705 int freq; 706 powernow_table[j].index = pst[j].fid; /* lower 8 bits */ 707 powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ 708 freq = find_khz_freq_from_fid(pst[j].fid); 709 powernow_table[j].frequency = freq; 710 } 711 powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; 712 powernow_table[data->numps].index = 0; 713 714 if (query_current_values_with_pending_wait(data)) { 715 kfree(powernow_table); 716 return -EIO; 717 } 718 719 pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); 720 data->powernow_table = powernow_table; 721 if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) 722 print_basics(data); 723 724 for (j = 0; j < data->numps; j++) 725 if ((pst[j].fid == data->currfid) && 726 (pst[j].vid == data->currvid)) 727 return 0; 728 729 pr_debug("currfid/vid do not match PST, ignoring\n"); 730 return 0; 731} 732 733/* Find and validate the PSB/PST table in BIOS. */ 734static int find_psb_table(struct powernow_k8_data *data) 735{ 736 struct psb_s *psb; 737 unsigned int i; 738 u32 mvs; 739 u8 maxvid; 740 u32 cpst = 0; 741 u32 thiscpuid; 742 743 for (i = 0xc0000; i < 0xffff0; i += 0x10) { 744 /* Scan BIOS looking for the signature. */ 745 /* It can not be at ffff0 - it is too big. */ 746 747 psb = phys_to_virt(i); 748 if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) 749 continue; 750 751 pr_debug("found PSB header at 0x%p\n", psb); 752 753 pr_debug("table vers: 0x%x\n", psb->tableversion); 754 if (psb->tableversion != PSB_VERSION_1_4) { 755 printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n"); 756 return -ENODEV; 757 } 758 759 pr_debug("flags: 0x%x\n", psb->flags1); 760 if (psb->flags1) { 761 printk(KERN_ERR FW_BUG PFX "unknown flags\n"); 762 return -ENODEV; 763 } 764 765 data->vstable = psb->vstable; 766 pr_debug("voltage stabilization time: %d(*20us)\n", 767 data->vstable); 768 769 pr_debug("flags2: 0x%x\n", psb->flags2); 770 data->rvo = psb->flags2 & 3; 771 data->irt = ((psb->flags2) >> 2) & 3; 772 mvs = ((psb->flags2) >> 4) & 3; 773 data->vidmvs = 1 << mvs; 774 data->batps = ((psb->flags2) >> 6) & 3; 775 776 pr_debug("ramp voltage offset: %d\n", data->rvo); 777 pr_debug("isochronous relief time: %d\n", data->irt); 778 pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); 779 780 pr_debug("numpst: 0x%x\n", psb->num_tables); 781 cpst = psb->num_tables; 782 if ((psb->cpuid == 0x00000fc0) || 783 (psb->cpuid == 0x00000fe0)) { 784 thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); 785 if ((thiscpuid == 0x00000fc0) || 786 (thiscpuid == 0x00000fe0)) 787 cpst = 1; 788 } 789 if (cpst != 1) { 790 printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); 791 return -ENODEV; 792 } 793 794 data->plllock = psb->plllocktime; 795 pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); 796 pr_debug("maxfid: 0x%x\n", psb->maxfid); 797 pr_debug("maxvid: 0x%x\n", psb->maxvid); 798 maxvid = psb->maxvid; 799 800 data->numps = psb->numps; 801 pr_debug("numpstates: 0x%x\n", data->numps); 802 return fill_powernow_table(data, 803 (struct pst_s *)(psb+1), maxvid); 804 } 805 /* 806 * If you see this message, complain to BIOS manufacturer. If 807 * he tells you "we do not support Linux" or some similar 808 * nonsense, remember that Windows 2000 uses the same legacy 809 * mechanism that the old Linux PSB driver uses. Tell them it 810 * is broken with Windows 2000. 811 * 812 * The reference to the AMD documentation is chapter 9 in the 813 * BIOS and Kernel Developer's Guide, which is available on 814 * www.amd.com 815 */ 816 printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); 817 printk(KERN_ERR PFX "Make sure that your BIOS is up to date" 818 " and Cool'N'Quiet support is enabled in BIOS setup\n"); 819 return -ENODEV; 820} 821 822static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, 823 unsigned int index) 824{ 825 u64 control; 826 827 if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) 828 return; 829 830 control = data->acpi_data.states[index].control; 831 data->irt = (control >> IRT_SHIFT) & IRT_MASK; 832 data->rvo = (control >> RVO_SHIFT) & RVO_MASK; 833 data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; 834 data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; 835 data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); 836 data->vstable = (control >> VST_SHIFT) & VST_MASK; 837} 838 839static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) 840{ 841 struct cpufreq_frequency_table *powernow_table; 842 int ret_val = -ENODEV; 843 u64 control, status; 844 845 if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { 846 pr_debug("register performance failed: bad ACPI data\n"); 847 return -EIO; 848 } 849 850 /* verify the data contained in the ACPI structures */ 851 if (data->acpi_data.state_count <= 1) { 852 pr_debug("No ACPI P-States\n"); 853 goto err_out; 854 } 855 856 control = data->acpi_data.control_register.space_id; 857 status = data->acpi_data.status_register.space_id; 858 859 if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || 860 (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { 861 pr_debug("Invalid control/status registers (%llx - %llx)\n", 862 control, status); 863 goto err_out; 864 } 865 866 /* fill in data->powernow_table */ 867 powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) 868 * (data->acpi_data.state_count + 1)), GFP_KERNEL); 869 if (!powernow_table) { 870 pr_debug("powernow_table memory alloc failure\n"); 871 goto err_out; 872 } 873 874 /* fill in data */ 875 data->numps = data->acpi_data.state_count; 876 powernow_k8_acpi_pst_values(data, 0); 877 878 if (cpu_family == CPU_HW_PSTATE) 879 ret_val = fill_powernow_table_pstate(data, powernow_table); 880 else 881 ret_val = fill_powernow_table_fidvid(data, powernow_table); 882 if (ret_val) 883 goto err_out_mem; 884 885 powernow_table[data->acpi_data.state_count].frequency = 886 CPUFREQ_TABLE_END; 887 powernow_table[data->acpi_data.state_count].index = 0; 888 data->powernow_table = powernow_table; 889 890 if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) 891 print_basics(data); 892 893 /* notify BIOS that we exist */ 894 acpi_processor_notify_smm(THIS_MODULE); 895 896 if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { 897 printk(KERN_ERR PFX 898 "unable to alloc powernow_k8_data cpumask\n"); 899 ret_val = -ENOMEM; 900 goto err_out_mem; 901 } 902 903 return 0; 904 905err_out_mem: 906 kfree(powernow_table); 907 908err_out: 909 acpi_processor_unregister_performance(&data->acpi_data, data->cpu); 910 911 /* data->acpi_data.state_count informs us at ->exit() 912 * whether ACPI was used */ 913 data->acpi_data.state_count = 0; 914 915 return ret_val; 916} 917 918static int fill_powernow_table_pstate(struct powernow_k8_data *data, 919 struct cpufreq_frequency_table *powernow_table) 920{ 921 int i; 922 u32 hi = 0, lo = 0; 923 rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi); 924 data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; 925 926 for (i = 0; i < data->acpi_data.state_count; i++) { 927 u32 index; 928 929 index = data->acpi_data.states[i].control & HW_PSTATE_MASK; 930 if (index > data->max_hw_pstate) { 931 printk(KERN_ERR PFX "invalid pstate %d - " 932 "bad value %d.\n", i, index); 933 printk(KERN_ERR PFX "Please report to BIOS " 934 "manufacturer\n"); 935 invalidate_entry(powernow_table, i); 936 continue; 937 } 938 939 ps_to_as[index] = i; 940 941 /* Frequency may be rounded for these */ 942 if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) 943 || boot_cpu_data.x86 == 0x11) { 944 945 rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); 946 if (!(hi & HW_PSTATE_VALID_MASK)) { 947 pr_debug("invalid pstate %d, ignoring\n", index); 948 invalidate_entry(powernow_table, i); 949 continue; 950 } 951 952 powernow_table[i].frequency = 953 freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); 954 } else 955 powernow_table[i].frequency = 956 data->acpi_data.states[i].core_frequency * 1000; 957 958 powernow_table[i].index = index; 959 } 960 return 0; 961} 962 963static int fill_powernow_table_fidvid(struct powernow_k8_data *data, 964 struct cpufreq_frequency_table *powernow_table) 965{ 966 int i; 967 968 for (i = 0; i < data->acpi_data.state_count; i++) { 969 u32 fid; 970 u32 vid; 971 u32 freq, index; 972 u64 status, control; 973 974 if (data->exttype) { 975 status = data->acpi_data.states[i].status; 976 fid = status & EXT_FID_MASK; 977 vid = (status >> VID_SHIFT) & EXT_VID_MASK; 978 } else { 979 control = data->acpi_data.states[i].control; 980 fid = control & FID_MASK; 981 vid = (control >> VID_SHIFT) & VID_MASK; 982 } 983 984 pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); 985 986 index = fid | (vid<<8); 987 powernow_table[i].index = index; 988 989 freq = find_khz_freq_from_fid(fid); 990 powernow_table[i].frequency = freq; 991 992 /* verify frequency is OK */ 993 if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { 994 pr_debug("invalid freq %u kHz, ignoring\n", freq); 995 invalidate_entry(powernow_table, i); 996 continue; 997 } 998 999 /* verify voltage is OK - 1000 * BIOSs are using "off" to indicate invalid */ 1001 if (vid == VID_OFF) { 1002 pr_debug("invalid vid %u, ignoring\n", vid); 1003 invalidate_entry(powernow_table, i); 1004 continue; 1005 } 1006 1007 if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { 1008 printk(KERN_INFO PFX "invalid freq entries " 1009 "%u kHz vs. %u kHz\n", freq, 1010 (unsigned int) 1011 (data->acpi_data.states[i].core_frequency 1012 * 1000)); 1013 invalidate_entry(powernow_table, i); 1014 continue; 1015 } 1016 } 1017 return 0; 1018} 1019 1020static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) 1021{ 1022 if (data->acpi_data.state_count) 1023 acpi_processor_unregister_performance(&data->acpi_data, 1024 data->cpu); 1025 free_cpumask_var(data->acpi_data.shared_cpu_map); 1026} 1027 1028static int get_transition_latency(struct powernow_k8_data *data) 1029{ 1030 int max_latency = 0; 1031 int i; 1032 for (i = 0; i < data->acpi_data.state_count; i++) { 1033 int cur_latency = data->acpi_data.states[i].transition_latency 1034 + data->acpi_data.states[i].bus_master_latency; 1035 if (cur_latency > max_latency) 1036 max_latency = cur_latency; 1037 } 1038 if (max_latency == 0) { 1039 /* 1040 * Fam 11h and later may return 0 as transition latency. This 1041 * is intended and means "very fast". While cpufreq core and 1042 * governors currently can handle that gracefully, better set it 1043 * to 1 to avoid problems in the future. 1044 */ 1045 if (boot_cpu_data.x86 < 0x11) 1046 printk(KERN_ERR FW_WARN PFX "Invalid zero transition " 1047 "latency\n"); 1048 max_latency = 1; 1049 } 1050 /* value in usecs, needs to be in nanoseconds */ 1051 return 1000 * max_latency; 1052} 1053 1054/* Take a frequency, and issue the fid/vid transition command */ 1055static int transition_frequency_fidvid(struct powernow_k8_data *data, 1056 unsigned int index) 1057{ 1058 u32 fid = 0; 1059 u32 vid = 0; 1060 int res, i; 1061 struct cpufreq_freqs freqs; 1062 1063 pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index); 1064 1065 /* fid/vid correctness check for k8 */ 1066 /* fid are the lower 8 bits of the index we stored into 1067 * the cpufreq frequency table in find_psb_table, vid 1068 * are the upper 8 bits. 1069 */ 1070 fid = data->powernow_table[index].index & 0xFF; 1071 vid = (data->powernow_table[index].index & 0xFF00) >> 8; 1072 1073 pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); 1074 1075 if (query_current_values_with_pending_wait(data)) 1076 return 1; 1077 1078 if ((data->currvid == vid) && (data->currfid == fid)) { 1079 pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n", 1080 fid, vid); 1081 return 0; 1082 } 1083 1084 pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n", 1085 smp_processor_id(), fid, vid); 1086 freqs.old = find_khz_freq_from_fid(data->currfid); 1087 freqs.new = find_khz_freq_from_fid(fid); 1088 1089 for_each_cpu(i, data->available_cores) { 1090 freqs.cpu = i; 1091 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); 1092 } 1093 1094 res = transition_fid_vid(data, fid, vid); 1095 if (res) 1096 return res; 1097 1098 freqs.new = find_khz_freq_from_fid(data->currfid); 1099 1100 for_each_cpu(i, data->available_cores) { 1101 freqs.cpu = i; 1102 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); 1103 } 1104 return res; 1105} 1106 1107/* Take a frequency, and issue the hardware pstate transition command */ 1108static int transition_frequency_pstate(struct powernow_k8_data *data, 1109 unsigned int index) 1110{ 1111 u32 pstate = 0; 1112 int res, i; 1113 struct cpufreq_freqs freqs; 1114 1115 pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index); 1116 1117 /* get MSR index for hardware pstate transition */ 1118 pstate = index & HW_PSTATE_MASK; 1119 if (pstate > data->max_hw_pstate) 1120 return -EINVAL; 1121 1122 freqs.old = find_khz_freq_from_pstate(data->powernow_table, 1123 data->currpstate); 1124 freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); 1125 1126 for_each_cpu(i, data->available_cores) { 1127 freqs.cpu = i; 1128 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); 1129 } 1130 1131 res = transition_pstate(data, pstate); 1132 freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); 1133 1134 for_each_cpu(i, data->available_cores) { 1135 freqs.cpu = i; 1136 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); 1137 } 1138 return res; 1139} 1140 1141struct powernowk8_target_arg { 1142 struct cpufreq_policy *pol; 1143 unsigned targfreq; 1144 unsigned relation; 1145}; 1146 1147static long powernowk8_target_fn(void *arg) 1148{ 1149 struct powernowk8_target_arg *pta = arg; 1150 struct cpufreq_policy *pol = pta->pol; 1151 unsigned targfreq = pta->targfreq; 1152 unsigned relation = pta->relation; 1153 struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); 1154 u32 checkfid; 1155 u32 checkvid; 1156 unsigned int newstate; 1157 int ret; 1158 1159 if (!data) 1160 return -EINVAL; 1161 1162 checkfid = data->currfid; 1163 checkvid = data->currvid; 1164 1165 if (pending_bit_stuck()) { 1166 printk(KERN_ERR PFX "failing targ, change pending bit set\n"); 1167 return -EIO; 1168 } 1169 1170 pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", 1171 pol->cpu, targfreq, pol->min, pol->max, relation); 1172 1173 if (query_current_values_with_pending_wait(data)) 1174 return -EIO; 1175 1176 if (cpu_family != CPU_HW_PSTATE) { 1177 pr_debug("targ: curr fid 0x%x, vid 0x%x\n", 1178 data->currfid, data->currvid); 1179 1180 if ((checkvid != data->currvid) || 1181 (checkfid != data->currfid)) { 1182 printk(KERN_INFO PFX 1183 "error - out of sync, fix 0x%x 0x%x, " 1184 "vid 0x%x 0x%x\n", 1185 checkfid, data->currfid, 1186 checkvid, data->currvid); 1187 } 1188 } 1189 1190 if (cpufreq_frequency_table_target(pol, data->powernow_table, 1191 targfreq, relation, &newstate)) 1192 return -EIO; 1193 1194 mutex_lock(&fidvid_mutex); 1195 1196 powernow_k8_acpi_pst_values(data, newstate); 1197 1198 if (cpu_family == CPU_HW_PSTATE) 1199 ret = transition_frequency_pstate(data, 1200 data->powernow_table[newstate].index); 1201 else 1202 ret = transition_frequency_fidvid(data, newstate); 1203 if (ret) { 1204 printk(KERN_ERR PFX "transition frequency failed\n"); 1205 mutex_unlock(&fidvid_mutex); 1206 return 1; 1207 } 1208 mutex_unlock(&fidvid_mutex); 1209 1210 if (cpu_family == CPU_HW_PSTATE) 1211 pol->cur = find_khz_freq_from_pstate(data->powernow_table, 1212 data->powernow_table[newstate].index); 1213 else 1214 pol->cur = find_khz_freq_from_fid(data->currfid); 1215 1216 return 0; 1217} 1218 1219/* Driver entry point to switch to the target frequency */ 1220static int powernowk8_target(struct cpufreq_policy *pol, 1221 unsigned targfreq, unsigned relation) 1222{ 1223 struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, 1224 .relation = relation }; 1225 1226 /* 1227 * Must run on @pol->cpu. cpufreq core is responsible for ensuring 1228 * that we're bound to the current CPU and pol->cpu stays online. 1229 */ 1230 if (smp_processor_id() == pol->cpu) 1231 return powernowk8_target_fn(&pta); 1232 else 1233 return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); 1234} 1235 1236/* Driver entry point to verify the policy and range of frequencies */ 1237static int powernowk8_verify(struct cpufreq_policy *pol) 1238{ 1239 struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); 1240 1241 if (!data) 1242 return -EINVAL; 1243 1244 return cpufreq_frequency_table_verify(pol, data->powernow_table); 1245} 1246 1247struct init_on_cpu { 1248 struct powernow_k8_data *data; 1249 int rc; 1250}; 1251 1252static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu) 1253{ 1254 struct init_on_cpu *init_on_cpu = _init_on_cpu; 1255 1256 if (pending_bit_stuck()) { 1257 printk(KERN_ERR PFX "failing init, change pending bit set\n"); 1258 init_on_cpu->rc = -ENODEV; 1259 return; 1260 } 1261 1262 if (query_current_values_with_pending_wait(init_on_cpu->data)) { 1263 init_on_cpu->rc = -ENODEV; 1264 return; 1265 } 1266 1267 if (cpu_family == CPU_OPTERON) 1268 fidvid_msr_init(); 1269 1270 init_on_cpu->rc = 0; 1271} 1272 1273/* per CPU init entry point to the driver */ 1274static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) 1275{ 1276 static const char ACPI_PSS_BIOS_BUG_MSG[] = 1277 KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" 1278 FW_BUG PFX "Try again with latest BIOS.\n"; 1279 struct powernow_k8_data *data; 1280 struct init_on_cpu init_on_cpu; 1281 int rc; 1282 struct cpuinfo_x86 *c = &cpu_data(pol->cpu); 1283 1284 if (!cpu_online(pol->cpu)) 1285 return -ENODEV; 1286 1287 smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); 1288 if (rc) 1289 return -ENODEV; 1290 1291 data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); 1292 if (!data) { 1293 printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); 1294 return -ENOMEM; 1295 } 1296 1297 data->cpu = pol->cpu; 1298 data->currpstate = HW_PSTATE_INVALID; 1299 1300 if (powernow_k8_cpu_init_acpi(data)) { 1301 /* 1302 * Use the PSB BIOS structure. This is only available on 1303 * an UP version, and is deprecated by AMD. 1304 */ 1305 if (num_online_cpus() != 1) { 1306 printk_once(ACPI_PSS_BIOS_BUG_MSG); 1307 goto err_out; 1308 } 1309 if (pol->cpu != 0) { 1310 printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " 1311 "CPU other than CPU0. Complain to your BIOS " 1312 "vendor.\n"); 1313 goto err_out; 1314 } 1315 rc = find_psb_table(data); 1316 if (rc) 1317 goto err_out; 1318 1319 /* Take a crude guess here. 1320 * That guess was in microseconds, so multiply with 1000 */ 1321 pol->cpuinfo.transition_latency = ( 1322 ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + 1323 ((1 << data->irt) * 30)) * 1000; 1324 } else /* ACPI _PSS objects available */ 1325 pol->cpuinfo.transition_latency = get_transition_latency(data); 1326 1327 /* only run on specific CPU from here on */ 1328 init_on_cpu.data = data; 1329 smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, 1330 &init_on_cpu, 1); 1331 rc = init_on_cpu.rc; 1332 if (rc != 0) 1333 goto err_out_exit_acpi; 1334 1335 if (cpu_family == CPU_HW_PSTATE) 1336 cpumask_copy(pol->cpus, cpumask_of(pol->cpu)); 1337 else 1338 cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); 1339 data->available_cores = pol->cpus; 1340 1341 if (cpu_family == CPU_HW_PSTATE) 1342 pol->cur = find_khz_freq_from_pstate(data->powernow_table, 1343 data->currpstate); 1344 else 1345 pol->cur = find_khz_freq_from_fid(data->currfid); 1346 pr_debug("policy current frequency %d kHz\n", pol->cur); 1347 1348 /* min/max the cpu is capable of */ 1349 if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { 1350 printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n"); 1351 powernow_k8_cpu_exit_acpi(data); 1352 kfree(data->powernow_table); 1353 kfree(data); 1354 return -EINVAL; 1355 } 1356 1357 /* Check for APERF/MPERF support in hardware */ 1358 if (cpu_has(c, X86_FEATURE_APERFMPERF)) 1359 cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf; 1360 1361 cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); 1362 1363 if (cpu_family == CPU_HW_PSTATE) 1364 pr_debug("cpu_init done, current pstate 0x%x\n", 1365 data->currpstate); 1366 else 1367 pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", 1368 data->currfid, data->currvid); 1369 1370 per_cpu(powernow_data, pol->cpu) = data; 1371 1372 return 0; 1373 1374err_out_exit_acpi: 1375 powernow_k8_cpu_exit_acpi(data); 1376 1377err_out: 1378 kfree(data); 1379 return -ENODEV; 1380} 1381 1382static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) 1383{ 1384 struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); 1385 1386 if (!data) 1387 return -EINVAL; 1388 1389 powernow_k8_cpu_exit_acpi(data); 1390 1391 cpufreq_frequency_table_put_attr(pol->cpu); 1392 1393 kfree(data->powernow_table); 1394 kfree(data); 1395 per_cpu(powernow_data, pol->cpu) = NULL; 1396 1397 return 0; 1398} 1399 1400static void query_values_on_cpu(void *_err) 1401{ 1402 int *err = _err; 1403 struct powernow_k8_data *data = __this_cpu_read(powernow_data); 1404 1405 *err = query_current_values_with_pending_wait(data); 1406} 1407 1408static unsigned int powernowk8_get(unsigned int cpu) 1409{ 1410 struct powernow_k8_data *data = per_cpu(powernow_data, cpu); 1411 unsigned int khz = 0; 1412 int err; 1413 1414 if (!data) 1415 return 0; 1416 1417 smp_call_function_single(cpu, query_values_on_cpu, &err, true); 1418 if (err) 1419 goto out; 1420 1421 if (cpu_family == CPU_HW_PSTATE) 1422 khz = find_khz_freq_from_pstate(data->powernow_table, 1423 data->currpstate); 1424 else 1425 khz = find_khz_freq_from_fid(data->currfid); 1426 1427 1428out: 1429 return khz; 1430} 1431 1432static void _cpb_toggle_msrs(bool t) 1433{ 1434 int cpu; 1435 1436 get_online_cpus(); 1437 1438 rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); 1439 1440 for_each_cpu(cpu, cpu_online_mask) { 1441 struct msr *reg = per_cpu_ptr(msrs, cpu); 1442 if (t) 1443 reg->l &= ~BIT(25); 1444 else 1445 reg->l |= BIT(25); 1446 } 1447 wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); 1448 1449 put_online_cpus(); 1450} 1451 1452/* 1453 * Switch on/off core performance boosting. 1454 * 1455 * 0=disable 1456 * 1=enable. 1457 */ 1458static void cpb_toggle(bool t) 1459{ 1460 if (!cpb_capable) 1461 return; 1462 1463 if (t && !cpb_enabled) { 1464 cpb_enabled = true; 1465 _cpb_toggle_msrs(t); 1466 printk(KERN_INFO PFX "Core Boosting enabled.\n"); 1467 } else if (!t && cpb_enabled) { 1468 cpb_enabled = false; 1469 _cpb_toggle_msrs(t); 1470 printk(KERN_INFO PFX "Core Boosting disabled.\n"); 1471 } 1472} 1473 1474static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, 1475 size_t count) 1476{ 1477 int ret = -EINVAL; 1478 unsigned long val = 0; 1479 1480 ret = strict_strtoul(buf, 10, &val); 1481 if (!ret && (val == 0 || val == 1) && cpb_capable) 1482 cpb_toggle(val); 1483 else 1484 return -EINVAL; 1485 1486 return count; 1487} 1488 1489static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) 1490{ 1491 return sprintf(buf, "%u\n", cpb_enabled); 1492} 1493 1494#define define_one_rw(_name) \ 1495static struct freq_attr _name = \ 1496__ATTR(_name, 0644, show_##_name, store_##_name) 1497 1498define_one_rw(cpb); 1499 1500static struct freq_attr *powernow_k8_attr[] = { 1501 &cpufreq_freq_attr_scaling_available_freqs, 1502 &cpb, 1503 NULL, 1504}; 1505 1506static struct cpufreq_driver cpufreq_amd64_driver = { 1507 .verify = powernowk8_verify, 1508 .target = powernowk8_target, 1509 .bios_limit = acpi_processor_get_bios_limit, 1510 .init = powernowk8_cpu_init, 1511 .exit = __devexit_p(powernowk8_cpu_exit), 1512 .get = powernowk8_get, 1513 .name = "powernow-k8", 1514 .owner = THIS_MODULE, 1515 .attr = powernow_k8_attr, 1516}; 1517 1518/* 1519 * Clear the boost-disable flag on the CPU_DOWN path so that this cpu 1520 * cannot block the remaining ones from boosting. On the CPU_UP path we 1521 * simply keep the boost-disable flag in sync with the current global 1522 * state. 1523 */ 1524static int cpb_notify(struct notifier_block *nb, unsigned long action, 1525 void *hcpu) 1526{ 1527 unsigned cpu = (long)hcpu; 1528 u32 lo, hi; 1529 1530 switch (action) { 1531 case CPU_UP_PREPARE: 1532 case CPU_UP_PREPARE_FROZEN: 1533 1534 if (!cpb_enabled) { 1535 rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); 1536 lo |= BIT(25); 1537 wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); 1538 } 1539 break; 1540 1541 case CPU_DOWN_PREPARE: 1542 case CPU_DOWN_PREPARE_FROZEN: 1543 rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); 1544 lo &= ~BIT(25); 1545 wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); 1546 break; 1547 1548 default: 1549 break; 1550 } 1551 1552 return NOTIFY_OK; 1553} 1554 1555static struct notifier_block cpb_nb = { 1556 .notifier_call = cpb_notify, 1557}; 1558 1559/* driver entry point for init */ 1560static int __cpuinit powernowk8_init(void) 1561{ 1562 unsigned int i, supported_cpus = 0, cpu; 1563 int rv; 1564 1565 if (!x86_match_cpu(powernow_k8_ids)) 1566 return -ENODEV; 1567 1568 for_each_online_cpu(i) { 1569 int rc; 1570 smp_call_function_single(i, check_supported_cpu, &rc, 1); 1571 if (rc == 0) 1572 supported_cpus++; 1573 } 1574 1575 if (supported_cpus != num_online_cpus()) 1576 return -ENODEV; 1577 1578 printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", 1579 num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); 1580 1581 if (boot_cpu_has(X86_FEATURE_CPB)) { 1582 1583 cpb_capable = true; 1584 1585 msrs = msrs_alloc(); 1586 if (!msrs) { 1587 printk(KERN_ERR "%s: Error allocating msrs!\n", __func__); 1588 return -ENOMEM; 1589 } 1590 1591 register_cpu_notifier(&cpb_nb); 1592 1593 rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); 1594 1595 for_each_cpu(cpu, cpu_online_mask) { 1596 struct msr *reg = per_cpu_ptr(msrs, cpu); 1597 cpb_enabled |= !(!!(reg->l & BIT(25))); 1598 } 1599 1600 printk(KERN_INFO PFX "Core Performance Boosting: %s.\n", 1601 (cpb_enabled ? "on" : "off")); 1602 } 1603 1604 rv = cpufreq_register_driver(&cpufreq_amd64_driver); 1605 if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) { 1606 unregister_cpu_notifier(&cpb_nb); 1607 msrs_free(msrs); 1608 msrs = NULL; 1609 } 1610 return rv; 1611} 1612 1613/* driver entry point for term */ 1614static void __exit powernowk8_exit(void) 1615{ 1616 pr_debug("exit\n"); 1617 1618 if (boot_cpu_has(X86_FEATURE_CPB)) { 1619 msrs_free(msrs); 1620 msrs = NULL; 1621 1622 unregister_cpu_notifier(&cpb_nb); 1623 } 1624 1625 cpufreq_unregister_driver(&cpufreq_amd64_driver); 1626} 1627 1628MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and " 1629 "Mark Langsdorf <mark.langsdorf@amd.com>"); 1630MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); 1631MODULE_LICENSE("GPL"); 1632 1633late_initcall(powernowk8_init); 1634module_exit(powernowk8_exit); 1635