1/* 2 * Copyright © 2006 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Authors: 24 * Eric Anholt <eric@anholt.net> 25 * 26 */ 27 28#include "dvo.h" 29 30/* 31 * register definitions for the i82807aa. 32 * 33 * Documentation on this chipset can be found in datasheet #29069001 at 34 * intel.com. 35 */ 36 37/* 38 * VCH Revision & GMBus Base Addr 39 */ 40#define VR00 0x00 41# define VR00_BASE_ADDRESS_MASK 0x007f 42 43/* 44 * Functionality Enable 45 */ 46#define VR01 0x01 47 48/* 49 * Enable the panel fitter 50 */ 51# define VR01_PANEL_FIT_ENABLE (1 << 3) 52/* 53 * Enables the LCD display. 54 * 55 * This must not be set while VR01_DVO_BYPASS_ENABLE is set. 56 */ 57# define VR01_LCD_ENABLE (1 << 2) 58/** Enables the DVO repeater. */ 59# define VR01_DVO_BYPASS_ENABLE (1 << 1) 60/** Enables the DVO clock */ 61# define VR01_DVO_ENABLE (1 << 0) 62 63/* 64 * LCD Interface Format 65 */ 66#define VR10 0x10 67/** Enables LVDS output instead of CMOS */ 68# define VR10_LVDS_ENABLE (1 << 4) 69/** Enables 18-bit LVDS output. */ 70# define VR10_INTERFACE_1X18 (0 << 2) 71/** Enables 24-bit LVDS or CMOS output */ 72# define VR10_INTERFACE_1X24 (1 << 2) 73/** Enables 2x18-bit LVDS or CMOS output. */ 74# define VR10_INTERFACE_2X18 (2 << 2) 75/** Enables 2x24-bit LVDS output */ 76# define VR10_INTERFACE_2X24 (3 << 2) 77 78/* 79 * VR20 LCD Horizontal Display Size 80 */ 81#define VR20 0x20 82 83/* 84 * LCD Vertical Display Size 85 */ 86#define VR21 0x20 87 88/* 89 * Panel power down status 90 */ 91#define VR30 0x30 92/** Read only bit indicating that the panel is not in a safe poweroff state. */ 93# define VR30_PANEL_ON (1 << 15) 94 95#define VR40 0x40 96# define VR40_STALL_ENABLE (1 << 13) 97# define VR40_VERTICAL_INTERP_ENABLE (1 << 12) 98# define VR40_ENHANCED_PANEL_FITTING (1 << 11) 99# define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10) 100# define VR40_AUTO_RATIO_ENABLE (1 << 9) 101# define VR40_CLOCK_GATING_ENABLE (1 << 8) 102 103/* 104 * Panel Fitting Vertical Ratio 105 * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2 106 */ 107#define VR41 0x41 108 109/* 110 * Panel Fitting Horizontal Ratio 111 * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2 112 */ 113#define VR42 0x42 114 115/* 116 * Horizontal Image Size 117 */ 118#define VR43 0x43 119 120/* VR80 GPIO 0 121 */ 122#define VR80 0x80 123#define VR81 0x81 124#define VR82 0x82 125#define VR83 0x83 126#define VR84 0x84 127#define VR85 0x85 128#define VR86 0x86 129#define VR87 0x87 130 131/* VR88 GPIO 8 132 */ 133#define VR88 0x88 134 135/* Graphics BIOS scratch 0 136 */ 137#define VR8E 0x8E 138# define VR8E_PANEL_TYPE_MASK (0xf << 0) 139# define VR8E_PANEL_INTERFACE_CMOS (0 << 4) 140# define VR8E_PANEL_INTERFACE_LVDS (1 << 4) 141# define VR8E_FORCE_DEFAULT_PANEL (1 << 5) 142 143/* Graphics BIOS scratch 1 144 */ 145#define VR8F 0x8F 146# define VR8F_VCH_PRESENT (1 << 0) 147# define VR8F_DISPLAY_CONN (1 << 1) 148# define VR8F_POWER_MASK (0x3c) 149# define VR8F_POWER_POS (2) 150 151 152struct ivch_priv { 153 bool quiet; 154 155 uint16_t width, height; 156}; 157 158 159static void ivch_dump_regs(struct intel_dvo_device *dvo); 160 161/** 162 * Reads a register on the ivch. 163 * 164 * Each of the 256 registers are 16 bits long. 165 */ 166static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) 167{ 168 struct ivch_priv *priv = dvo->dev_priv; 169 struct i2c_adapter *adapter = dvo->i2c_bus; 170 u8 out_buf[1]; 171 u8 in_buf[2]; 172 173 struct i2c_msg msgs[] = { 174 { 175 .addr = dvo->slave_addr, 176 .flags = I2C_M_RD, 177 .len = 0, 178 }, 179 { 180 .addr = 0, 181 .flags = I2C_M_NOSTART, 182 .len = 1, 183 .buf = out_buf, 184 }, 185 { 186 .addr = dvo->slave_addr, 187 .flags = I2C_M_RD | I2C_M_NOSTART, 188 .len = 2, 189 .buf = in_buf, 190 } 191 }; 192 193 out_buf[0] = addr; 194 195 if (i2c_transfer(adapter, msgs, 3) == 3) { 196 *data = (in_buf[1] << 8) | in_buf[0]; 197 return true; 198 } 199 200 if (!priv->quiet) { 201 DRM_DEBUG_KMS("Unable to read register 0x%02x from " 202 "%s:%02x.\n", 203 addr, adapter->name, dvo->slave_addr); 204 } 205 return false; 206} 207 208/** Writes a 16-bit register on the ivch */ 209static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) 210{ 211 struct ivch_priv *priv = dvo->dev_priv; 212 struct i2c_adapter *adapter = dvo->i2c_bus; 213 u8 out_buf[3]; 214 struct i2c_msg msg = { 215 .addr = dvo->slave_addr, 216 .flags = 0, 217 .len = 3, 218 .buf = out_buf, 219 }; 220 221 out_buf[0] = addr; 222 out_buf[1] = data & 0xff; 223 out_buf[2] = data >> 8; 224 225 if (i2c_transfer(adapter, &msg, 1) == 1) 226 return true; 227 228 if (!priv->quiet) { 229 DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", 230 addr, adapter->name, dvo->slave_addr); 231 } 232 233 return false; 234} 235 236/** Probes the given bus and slave address for an ivch */ 237static bool ivch_init(struct intel_dvo_device *dvo, 238 struct i2c_adapter *adapter) 239{ 240 struct ivch_priv *priv; 241 uint16_t temp; 242 243 priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL); 244 if (priv == NULL) 245 return false; 246 247 dvo->i2c_bus = adapter; 248 dvo->dev_priv = priv; 249 priv->quiet = true; 250 251 if (!ivch_read(dvo, VR00, &temp)) 252 goto out; 253 priv->quiet = false; 254 255 /* Since the identification bits are probably zeroes, which doesn't seem 256 * very unique, check that the value in the base address field matches 257 * the address it's responding on. 258 */ 259 if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { 260 DRM_DEBUG_KMS("ivch detect failed due to address mismatch " 261 "(%d vs %d)\n", 262 (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); 263 goto out; 264 } 265 266 ivch_read(dvo, VR20, &priv->width); 267 ivch_read(dvo, VR21, &priv->height); 268 269 return true; 270 271out: 272 kfree(priv); 273 return false; 274} 275 276static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo) 277{ 278 return connector_status_connected; 279} 280 281static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo, 282 struct drm_display_mode *mode) 283{ 284 if (mode->clock > 112000) 285 return MODE_CLOCK_HIGH; 286 287 return MODE_OK; 288} 289 290/** Sets the power state of the panel connected to the ivch */ 291static void ivch_dpms(struct intel_dvo_device *dvo, bool enable) 292{ 293 int i; 294 uint16_t vr01, vr30, backlight; 295 296 /* Set the new power state of the panel. */ 297 if (!ivch_read(dvo, VR01, &vr01)) 298 return; 299 300 if (enable) 301 backlight = 1; 302 else 303 backlight = 0; 304 ivch_write(dvo, VR80, backlight); 305 306 if (enable) 307 vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE; 308 else 309 vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE); 310 311 ivch_write(dvo, VR01, vr01); 312 313 /* Wait for the panel to make its state transition */ 314 for (i = 0; i < 100; i++) { 315 if (!ivch_read(dvo, VR30, &vr30)) 316 break; 317 318 if (((vr30 & VR30_PANEL_ON) != 0) == enable) 319 break; 320 udelay(1000); 321 } 322 /* wait some more; vch may fail to resync sometimes without this */ 323 udelay(16 * 1000); 324} 325 326static bool ivch_get_hw_state(struct intel_dvo_device *dvo) 327{ 328 uint16_t vr01; 329 330 /* Set the new power state of the panel. */ 331 if (!ivch_read(dvo, VR01, &vr01)) 332 return false; 333 334 if (vr01 & VR01_LCD_ENABLE) 335 return true; 336 else 337 return false; 338} 339 340static void ivch_mode_set(struct intel_dvo_device *dvo, 341 struct drm_display_mode *mode, 342 struct drm_display_mode *adjusted_mode) 343{ 344 uint16_t vr40 = 0; 345 uint16_t vr01; 346 347 vr01 = 0; 348 vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE | 349 VR40_HORIZONTAL_INTERP_ENABLE); 350 351 if (mode->hdisplay != adjusted_mode->hdisplay || 352 mode->vdisplay != adjusted_mode->vdisplay) { 353 uint16_t x_ratio, y_ratio; 354 355 vr01 |= VR01_PANEL_FIT_ENABLE; 356 vr40 |= VR40_CLOCK_GATING_ENABLE; 357 x_ratio = (((mode->hdisplay - 1) << 16) / 358 (adjusted_mode->hdisplay - 1)) >> 2; 359 y_ratio = (((mode->vdisplay - 1) << 16) / 360 (adjusted_mode->vdisplay - 1)) >> 2; 361 ivch_write(dvo, VR42, x_ratio); 362 ivch_write(dvo, VR41, y_ratio); 363 } else { 364 vr01 &= ~VR01_PANEL_FIT_ENABLE; 365 vr40 &= ~VR40_CLOCK_GATING_ENABLE; 366 } 367 vr40 &= ~VR40_AUTO_RATIO_ENABLE; 368 369 ivch_write(dvo, VR01, vr01); 370 ivch_write(dvo, VR40, vr40); 371 372 ivch_dump_regs(dvo); 373} 374 375static void ivch_dump_regs(struct intel_dvo_device *dvo) 376{ 377 uint16_t val; 378 379 ivch_read(dvo, VR00, &val); 380 DRM_DEBUG_KMS("VR00: 0x%04x\n", val); 381 ivch_read(dvo, VR01, &val); 382 DRM_DEBUG_KMS("VR01: 0x%04x\n", val); 383 ivch_read(dvo, VR30, &val); 384 DRM_DEBUG_KMS("VR30: 0x%04x\n", val); 385 ivch_read(dvo, VR40, &val); 386 DRM_DEBUG_KMS("VR40: 0x%04x\n", val); 387 388 /* GPIO registers */ 389 ivch_read(dvo, VR80, &val); 390 DRM_DEBUG_KMS("VR80: 0x%04x\n", val); 391 ivch_read(dvo, VR81, &val); 392 DRM_DEBUG_KMS("VR81: 0x%04x\n", val); 393 ivch_read(dvo, VR82, &val); 394 DRM_DEBUG_KMS("VR82: 0x%04x\n", val); 395 ivch_read(dvo, VR83, &val); 396 DRM_DEBUG_KMS("VR83: 0x%04x\n", val); 397 ivch_read(dvo, VR84, &val); 398 DRM_DEBUG_KMS("VR84: 0x%04x\n", val); 399 ivch_read(dvo, VR85, &val); 400 DRM_DEBUG_KMS("VR85: 0x%04x\n", val); 401 ivch_read(dvo, VR86, &val); 402 DRM_DEBUG_KMS("VR86: 0x%04x\n", val); 403 ivch_read(dvo, VR87, &val); 404 DRM_DEBUG_KMS("VR87: 0x%04x\n", val); 405 ivch_read(dvo, VR88, &val); 406 DRM_DEBUG_KMS("VR88: 0x%04x\n", val); 407 408 /* Scratch register 0 - AIM Panel type */ 409 ivch_read(dvo, VR8E, &val); 410 DRM_DEBUG_KMS("VR8E: 0x%04x\n", val); 411 412 /* Scratch register 1 - Status register */ 413 ivch_read(dvo, VR8F, &val); 414 DRM_DEBUG_KMS("VR8F: 0x%04x\n", val); 415} 416 417static void ivch_destroy(struct intel_dvo_device *dvo) 418{ 419 struct ivch_priv *priv = dvo->dev_priv; 420 421 if (priv) { 422 kfree(priv); 423 dvo->dev_priv = NULL; 424 } 425} 426 427struct intel_dvo_dev_ops ivch_ops = { 428 .init = ivch_init, 429 .dpms = ivch_dpms, 430 .get_hw_state = ivch_get_hw_state, 431 .mode_valid = ivch_mode_valid, 432 .mode_set = ivch_mode_set, 433 .detect = ivch_detect, 434 .dump_regs = ivch_dump_regs, 435 .destroy = ivch_destroy, 436}; 437