Kconfig revision 260f81ffc1b9f09dde355caa09e4b312756666f0
1# 2# Hardware monitoring chip drivers configuration 3# 4 5menuconfig HWMON 6 tristate "Hardware Monitoring support" 7 depends on HAS_IOMEM 8 default y 9 help 10 Hardware monitoring devices let you monitor the hardware health 11 of a system. Most modern motherboards include such a device. It 12 can include temperature sensors, voltage sensors, fan speed 13 sensors and various additional features such as the ability to 14 control the speed of the fans. If you want this support you 15 should say Y here and also to the specific driver(s) for your 16 sensors chip(s) below. 17 18 To find out which specific driver(s) you need, use the 19 sensors-detect script from the lm_sensors package. Read 20 <file:Documentation/hwmon/userspace-tools> for details. 21 22 This support can also be built as a module. If so, the module 23 will be called hwmon. 24 25if HWMON 26 27config HWMON_VID 28 tristate 29 default n 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 default n 34 help 35 Say Y here if you want the I2C chip drivers to produce a bunch of 36 debug messages to the system log. Select this if you are having 37 a problem with I2C support and want to see more of what is going 38 on. 39 40comment "Native drivers" 41 42config SENSORS_AB8500 43 tristate "AB8500 thermal monitoring" 44 depends on AB8500_GPADC && AB8500_BM 45 default n 46 help 47 If you say yes here you get support for the thermal sensor part 48 of the AB8500 chip. The driver includes thermal management for 49 AB8500 die and two GPADC channels. The GPADC channel are preferably 50 used to access sensors outside the AB8500 chip. 51 52 This driver can also be built as a module. If so, the module 53 will be called abx500-temp. 54 55config SENSORS_ABITUGURU 56 tristate "Abit uGuru (rev 1 & 2)" 57 depends on X86 && DMI 58 help 59 If you say yes here you get support for the sensor part of the first 60 and second revision of the Abit uGuru chip. The voltage and frequency 61 control parts of the Abit uGuru are not supported. The Abit uGuru 62 chip can be found on Abit uGuru featuring motherboards (most modern 63 Abit motherboards from before end 2005). For more info and a list 64 of which motherboards have which revision see 65 Documentation/hwmon/abituguru 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru. 69 70config SENSORS_ABITUGURU3 71 tristate "Abit uGuru (rev 3)" 72 depends on X86 && DMI 73 help 74 If you say yes here you get support for the sensor part of the 75 third revision of the Abit uGuru chip. Only reading the sensors 76 and their settings is supported. The third revision of the Abit 77 uGuru chip can be found on recent Abit motherboards (since end 78 2005). For more info and a list of which motherboards have which 79 revision see Documentation/hwmon/abituguru3 80 81 This driver can also be built as a module. If so, the module 82 will be called abituguru3. 83 84config SENSORS_AD7314 85 tristate "Analog Devices AD7314 and compatibles" 86 depends on SPI 87 help 88 If you say yes here you get support for the Analog Devices 89 AD7314, ADT7301 and ADT7302 temperature sensors. 90 91 This driver can also be built as a module. If so, the module 92 will be called ad7314. 93 94config SENSORS_AD7414 95 tristate "Analog Devices AD7414" 96 depends on I2C 97 help 98 If you say yes here you get support for the Analog Devices 99 AD7414 temperature monitoring chip. 100 101 This driver can also be built as a module. If so, the module 102 will be called ad7414. 103 104config SENSORS_AD7418 105 tristate "Analog Devices AD7416, AD7417 and AD7418" 106 depends on I2C 107 help 108 If you say yes here you get support for the Analog Devices 109 AD7416, AD7417 and AD7418 temperature monitoring chips. 110 111 This driver can also be built as a module. If so, the module 112 will be called ad7418. 113 114config SENSORS_ADCXX 115 tristate "National Semiconductor ADCxxxSxxx" 116 depends on SPI_MASTER 117 help 118 If you say yes here you get support for the National Semiconductor 119 ADC<bb><c>S<sss> chip family, where 120 * bb is the resolution in number of bits (8, 10, 12) 121 * c is the number of channels (1, 2, 4, 8) 122 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 123 kSPS and 101 for 1 MSPS) 124 125 Examples : ADC081S101, ADC124S501, ... 126 127 This driver can also be built as a module. If so, the module 128 will be called adcxx. 129 130config SENSORS_ADM1021 131 tristate "Analog Devices ADM1021 and compatibles" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1021 135 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 136 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1021. 140 141config SENSORS_ADM1025 142 tristate "Analog Devices ADM1025 and compatibles" 143 depends on I2C 144 select HWMON_VID 145 help 146 If you say yes here you get support for Analog Devices ADM1025 147 and Philips NE1619 sensor chips. 148 149 This driver can also be built as a module. If so, the module 150 will be called adm1025. 151 152config SENSORS_ADM1026 153 tristate "Analog Devices ADM1026 and compatibles" 154 depends on I2C 155 select HWMON_VID 156 help 157 If you say yes here you get support for Analog Devices ADM1026 158 sensor chip. 159 160 This driver can also be built as a module. If so, the module 161 will be called adm1026. 162 163config SENSORS_ADM1029 164 tristate "Analog Devices ADM1029" 165 depends on I2C 166 help 167 If you say yes here you get support for Analog Devices ADM1029 168 sensor chip. 169 Very rare chip, please let us know you use it. 170 171 This driver can also be built as a module. If so, the module 172 will be called adm1029. 173 174config SENSORS_ADM1031 175 tristate "Analog Devices ADM1031 and compatibles" 176 depends on I2C 177 help 178 If you say yes here you get support for Analog Devices ADM1031 179 and ADM1030 sensor chips. 180 181 This driver can also be built as a module. If so, the module 182 will be called adm1031. 183 184config SENSORS_ADM9240 185 tristate "Analog Devices ADM9240 and compatibles" 186 depends on I2C 187 select HWMON_VID 188 help 189 If you say yes here you get support for Analog Devices ADM9240, 190 Dallas DS1780, National Semiconductor LM81 sensor chips. 191 192 This driver can also be built as a module. If so, the module 193 will be called adm9240. 194 195config SENSORS_ADT7X10 196 tristate 197 help 198 This module contains common code shared by the ADT7310/ADT7320 and 199 ADT7410/ADT7420 temperature monitoring chip drivers. 200 201 If build as a module, the module will be called adt7x10. 202 203config SENSORS_ADT7310 204 tristate "Analog Devices ADT7310/ADT7320" 205 depends on SPI_MASTER 206 select SENSORS_ADT7X10 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7310 and ADT7320 temperature monitoring chips. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7310. 213 214config SENSORS_ADT7410 215 tristate "Analog Devices ADT7410/ADT7420" 216 depends on I2C 217 select SENSORS_ADT7X10 218 help 219 If you say yes here you get support for the Analog Devices 220 ADT7410 and ADT7420 temperature monitoring chips. 221 222 This driver can also be built as a module. If so, the module 223 will be called adt7410. 224 225config SENSORS_ADT7411 226 tristate "Analog Devices ADT7411" 227 depends on I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7411 voltage and temperature monitoring chip. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7411. 234 235config SENSORS_ADT7462 236 tristate "Analog Devices ADT7462" 237 depends on I2C 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7462 temperature monitoring chips. 241 242 This driver can also be built as a module. If so, the module 243 will be called adt7462. 244 245config SENSORS_ADT7470 246 tristate "Analog Devices ADT7470" 247 depends on I2C 248 help 249 If you say yes here you get support for the Analog Devices 250 ADT7470 temperature monitoring chips. 251 252 This driver can also be built as a module. If so, the module 253 will be called adt7470. 254 255config SENSORS_ADT7475 256 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 257 depends on I2C 258 select HWMON_VID 259 help 260 If you say yes here you get support for the Analog Devices 261 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 262 chips. 263 264 This driver can also be build as a module. If so, the module 265 will be called adt7475. 266 267config SENSORS_ASC7621 268 tristate "Andigilog aSC7621" 269 depends on I2C 270 help 271 If you say yes here you get support for the aSC7621 272 family of SMBus sensors chip found on most Intel X38, X48, X58, 273 945, 965 and 975 desktop boards. Currently supported chips: 274 aSC7621 275 aSC7621a 276 277 This driver can also be built as a module. If so, the module 278 will be called asc7621. 279 280config SENSORS_K8TEMP 281 tristate "AMD Athlon64/FX or Opteron temperature sensor" 282 depends on X86 && PCI 283 help 284 If you say yes here you get support for the temperature 285 sensor(s) inside your CPU. Supported is whole AMD K8 286 microarchitecture. Please note that you will need at least 287 lm-sensors 2.10.1 for proper userspace support. 288 289 This driver can also be built as a module. If so, the module 290 will be called k8temp. 291 292config SENSORS_K10TEMP 293 tristate "AMD Family 10h+ temperature sensor" 294 depends on X86 && PCI 295 help 296 If you say yes here you get support for the temperature 297 sensor(s) inside your CPU. Supported are later revisions of 298 the AMD Family 10h and all revisions of the AMD Family 11h, 299 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity) 300 microarchitectures. 301 302 This driver can also be built as a module. If so, the module 303 will be called k10temp. 304 305config SENSORS_FAM15H_POWER 306 tristate "AMD Family 15h processor power" 307 depends on X86 && PCI 308 help 309 If you say yes here you get support for processor power 310 information of your AMD family 15h CPU. 311 312 This driver can also be built as a module. If so, the module 313 will be called fam15h_power. 314 315config SENSORS_ASB100 316 tristate "Asus ASB100 Bach" 317 depends on X86 && I2C 318 select HWMON_VID 319 help 320 If you say yes here you get support for the ASB100 Bach sensor 321 chip found on some Asus mainboards. 322 323 This driver can also be built as a module. If so, the module 324 will be called asb100. 325 326config SENSORS_ATXP1 327 tristate "Attansic ATXP1 VID controller" 328 depends on I2C 329 select HWMON_VID 330 help 331 If you say yes here you get support for the Attansic ATXP1 VID 332 controller. 333 334 If your board have such a chip, you are able to control your CPU 335 core and other voltages. 336 337 This driver can also be built as a module. If so, the module 338 will be called atxp1. 339 340config SENSORS_DS620 341 tristate "Dallas Semiconductor DS620" 342 depends on I2C 343 help 344 If you say yes here you get support for Dallas Semiconductor 345 DS620 sensor chip. 346 347 This driver can also be built as a module. If so, the module 348 will be called ds620. 349 350config SENSORS_DS1621 351 tristate "Dallas Semiconductor DS1621 and compatibles" 352 depends on I2C 353 help 354 If you say yes here you get support for Dallas Semiconductor/Maxim 355 Integrated DS1621 sensor chips and compatible models including: 356 357 - Dallas Semiconductor DS1625 358 - Maxim Integrated DS1631 359 - Maxim Integrated DS1721 360 - Maxim Integrated DS1731 361 362 This driver can also be built as a module. If so, the module 363 will be called ds1621. 364 365config SENSORS_DA9052_ADC 366 tristate "Dialog DA9052/DA9053 ADC" 367 depends on PMIC_DA9052 368 help 369 Say y here to support the ADC found on Dialog Semiconductor 370 DA9052-BC and DA9053-AA/Bx PMICs. 371 372 This driver can also be built as module. If so, the module 373 will be called da9052-hwmon. 374 375config SENSORS_DA9055 376 tristate "Dialog Semiconductor DA9055 ADC" 377 depends on MFD_DA9055 378 help 379 If you say yes here you get support for ADC on the Dialog 380 Semiconductor DA9055 PMIC. 381 382 This driver can also be built as a module. If so, the module 383 will be called da9055-hwmon. 384 385config SENSORS_I5K_AMB 386 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 387 depends on PCI 388 help 389 If you say yes here you get support for FB-DIMM AMB temperature 390 monitoring chips on systems with the Intel 5000 series chipset. 391 392 This driver can also be built as a module. If so, the module 393 will be called i5k_amb. 394 395config SENSORS_F71805F 396 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 397 depends on !PPC 398 help 399 If you say yes here you get support for hardware monitoring 400 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 401 Super-I/O chips. 402 403 This driver can also be built as a module. If so, the module 404 will be called f71805f. 405 406config SENSORS_F71882FG 407 tristate "Fintek F71882FG and compatibles" 408 depends on !PPC 409 help 410 If you say yes here you get support for hardware monitoring 411 features of many Fintek Super-I/O (LPC) chips. The currently 412 supported chips are: 413 F71808E/A 414 F71858FG 415 F71862FG 416 F71863FG 417 F71869F/E/A 418 F71882FG 419 F71883FG 420 F71889FG/ED/A 421 F8000 422 F81801U 423 F81865F 424 425 This driver can also be built as a module. If so, the module 426 will be called f71882fg. 427 428config SENSORS_F75375S 429 tristate "Fintek F75375S/SP, F75373 and F75387" 430 depends on I2C 431 help 432 If you say yes here you get support for hardware monitoring 433 features of the Fintek F75375S/SP, F75373 and F75387 434 435 This driver can also be built as a module. If so, the module 436 will be called f75375s. 437 438config SENSORS_FSCHMD 439 tristate "Fujitsu Siemens Computers sensor chips" 440 depends on X86 && I2C 441 help 442 If you say yes here you get support for the following Fujitsu 443 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 444 Heimdall, Heracles, Hades and Syleus including support for the 445 integrated watchdog. 446 447 This is a merged driver for FSC sensor chips replacing the fscpos, 448 fscscy and fscher drivers and adding support for several other FSC 449 sensor chips. 450 451 This driver can also be built as a module. If so, the module 452 will be called fschmd. 453 454config SENSORS_G760A 455 tristate "GMT G760A" 456 depends on I2C 457 help 458 If you say yes here you get support for Global Mixed-mode 459 Technology Inc G760A fan speed PWM controller chips. 460 461 This driver can also be built as a module. If so, the module 462 will be called g760a. 463 464config SENSORS_GL518SM 465 tristate "Genesys Logic GL518SM" 466 depends on I2C 467 help 468 If you say yes here you get support for Genesys Logic GL518SM 469 sensor chips. 470 471 This driver can also be built as a module. If so, the module 472 will be called gl518sm. 473 474config SENSORS_GL520SM 475 tristate "Genesys Logic GL520SM" 476 depends on I2C 477 select HWMON_VID 478 help 479 If you say yes here you get support for Genesys Logic GL520SM 480 sensor chips. 481 482 This driver can also be built as a module. If so, the module 483 will be called gl520sm. 484 485config SENSORS_GPIO_FAN 486 tristate "GPIO fan" 487 depends on GPIOLIB 488 help 489 If you say yes here you get support for fans connected to GPIO lines. 490 491 This driver can also be built as a module. If so, the module 492 will be called gpio-fan. 493 494config SENSORS_HIH6130 495 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 496 depends on I2C 497 help 498 If you say yes here you get support for Honeywell Humidicon 499 HIH-6130 and HIH-6131 Humidicon humidity sensors. 500 501 This driver can also be built as a module. If so, the module 502 will be called hih6130. 503 504config SENSORS_CORETEMP 505 tristate "Intel Core/Core2/Atom temperature sensor" 506 depends on X86 507 help 508 If you say yes here you get support for the temperature 509 sensor inside your CPU. Most of the family 6 CPUs 510 are supported. Check Documentation/hwmon/coretemp for details. 511 512config SENSORS_IBMAEM 513 tristate "IBM Active Energy Manager temperature/power sensors and control" 514 select IPMI_SI 515 depends on IPMI_HANDLER 516 help 517 If you say yes here you get support for the temperature and 518 power sensors and capping hardware in various IBM System X 519 servers that support Active Energy Manager. This includes 520 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 521 and certain HC10/HS2x/LS2x/QS2x blades. 522 523 This driver can also be built as a module. If so, the module 524 will be called ibmaem. 525 526config SENSORS_IBMPEX 527 tristate "IBM PowerExecutive temperature/power sensors" 528 select IPMI_SI 529 depends on IPMI_HANDLER 530 help 531 If you say yes here you get support for the temperature and 532 power sensors in various IBM System X servers that support 533 PowerExecutive. So far this includes the x3350, x3550, x3650, 534 x3655, and x3755; the x3800, x3850, and x3950 models that have 535 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 536 537 This driver can also be built as a module. If so, the module 538 will be called ibmpex. 539 540config SENSORS_IIO_HWMON 541 tristate "Hwmon driver that uses channels specified via iio maps" 542 depends on IIO 543 help 544 This is a platform driver that in combination with a suitable 545 map allows IIO devices to provide basic hwmon functionality 546 for those channels specified in the map. This map can be provided 547 either via platform data or the device tree bindings. 548 549config SENSORS_IT87 550 tristate "ITE IT87xx and compatibles" 551 depends on !PPC 552 select HWMON_VID 553 help 554 If you say yes here you get support for ITE IT8705F, IT8712F, 555 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, 556 IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the 557 SiS950 clone. 558 559 This driver can also be built as a module. If so, the module 560 will be called it87. 561 562config SENSORS_JZ4740 563 tristate "Ingenic JZ4740 SoC ADC driver" 564 depends on MACH_JZ4740 && MFD_JZ4740_ADC 565 help 566 If you say yes here you get support for reading adc values from the ADCIN 567 pin on Ingenic JZ4740 SoC based boards. 568 569 This driver can also be build as a module. If so, the module will be 570 called jz4740-hwmon. 571 572config SENSORS_JC42 573 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 574 depends on I2C 575 help 576 If you say yes here, you get support for JEDEC JC42.4 compliant 577 temperature sensors, which are used on many DDR3 memory modules for 578 mobile devices and servers. Support will include, but not be limited 579 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 580 MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), 581 STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. 582 583 This driver can also be built as a module. If so, the module 584 will be called jc42. 585 586config SENSORS_LINEAGE 587 tristate "Lineage Compact Power Line Power Entry Module" 588 depends on I2C 589 help 590 If you say yes here you get support for the Lineage Compact Power Line 591 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 592 CP2000DC, CP2725, and others. 593 594 This driver can also be built as a module. If so, the module 595 will be called lineage-pem. 596 597config SENSORS_LM63 598 tristate "National Semiconductor LM63 and compatibles" 599 depends on I2C 600 help 601 If you say yes here you get support for the National 602 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 603 sensors with integrated fan control. Such chips are found 604 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 605 others. 606 607 This driver can also be built as a module. If so, the module 608 will be called lm63. 609 610config SENSORS_LM70 611 tristate "National Semiconductor LM70 and compatibles" 612 depends on SPI_MASTER 613 help 614 If you say yes here you get support for the National Semiconductor 615 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- 616 ture sensor chips. 617 618 This driver can also be built as a module. If so, the module 619 will be called lm70. 620 621config SENSORS_LM73 622 tristate "National Semiconductor LM73" 623 depends on I2C 624 help 625 If you say yes here you get support for National Semiconductor LM73 626 sensor chips. 627 This driver can also be built as a module. If so, the module 628 will be called lm73. 629 630config SENSORS_LM75 631 tristate "National Semiconductor LM75 and compatibles" 632 depends on I2C 633 help 634 If you say yes here you get support for one common type of 635 temperature sensor chip, with models including: 636 637 - Analog Devices ADT75 638 - Dallas Semiconductor DS75, DS1775 and DS7505 639 - Maxim MAX6625 and MAX6626 640 - Microchip MCP980x 641 - National Semiconductor LM75, LM75A 642 - NXP's LM75A 643 - ST Microelectronics STDS75 644 - TelCom (now Microchip) TCN75 645 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, 646 TMP275 647 648 This driver supports driver model based binding through board 649 specific I2C device tables. 650 651 It also supports the "legacy" style of driver binding. To use 652 that with some chips which don't replicate LM75 quirks exactly, 653 you may need the "force" module parameter. 654 655 This driver can also be built as a module. If so, the module 656 will be called lm75. 657 658config SENSORS_LM77 659 tristate "National Semiconductor LM77" 660 depends on I2C 661 help 662 If you say yes here you get support for National Semiconductor LM77 663 sensor chips. 664 665 This driver can also be built as a module. If so, the module 666 will be called lm77. 667 668config SENSORS_LM78 669 tristate "National Semiconductor LM78 and compatibles" 670 depends on I2C 671 select HWMON_VID 672 help 673 If you say yes here you get support for National Semiconductor LM78, 674 LM78-J and LM79. 675 676 This driver can also be built as a module. If so, the module 677 will be called lm78. 678 679config SENSORS_LM80 680 tristate "National Semiconductor LM80 and LM96080" 681 depends on I2C 682 help 683 If you say yes here you get support for National Semiconductor 684 LM80 and LM96080 sensor chips. 685 686 This driver can also be built as a module. If so, the module 687 will be called lm80. 688 689config SENSORS_LM83 690 tristate "National Semiconductor LM83 and compatibles" 691 depends on I2C 692 help 693 If you say yes here you get support for National Semiconductor 694 LM82 and LM83 sensor chips. 695 696 This driver can also be built as a module. If so, the module 697 will be called lm83. 698 699config SENSORS_LM85 700 tristate "National Semiconductor LM85 and compatibles" 701 depends on I2C 702 select HWMON_VID 703 help 704 If you say yes here you get support for National Semiconductor LM85 705 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 706 EMC6D101, EMC6D102, and EMC6D103. 707 708 This driver can also be built as a module. If so, the module 709 will be called lm85. 710 711config SENSORS_LM87 712 tristate "National Semiconductor LM87 and compatibles" 713 depends on I2C 714 select HWMON_VID 715 help 716 If you say yes here you get support for National Semiconductor LM87 717 and Analog Devices ADM1024 sensor chips. 718 719 This driver can also be built as a module. If so, the module 720 will be called lm87. 721 722config SENSORS_LM90 723 tristate "National Semiconductor LM90 and compatibles" 724 depends on I2C 725 help 726 If you say yes here you get support for National Semiconductor LM90, 727 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, 728 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, 729 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, 730 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781 731 sensor chips. 732 733 This driver can also be built as a module. If so, the module 734 will be called lm90. 735 736config SENSORS_LM92 737 tristate "National Semiconductor LM92 and compatibles" 738 depends on I2C 739 help 740 If you say yes here you get support for National Semiconductor LM92 741 and Maxim MAX6635 sensor chips. 742 743 This driver can also be built as a module. If so, the module 744 will be called lm92. 745 746config SENSORS_LM93 747 tristate "National Semiconductor LM93 and compatibles" 748 depends on I2C 749 select HWMON_VID 750 help 751 If you say yes here you get support for National Semiconductor LM93, 752 LM94, and compatible sensor chips. 753 754 This driver can also be built as a module. If so, the module 755 will be called lm93. 756 757config SENSORS_LTC4151 758 tristate "Linear Technology LTC4151" 759 depends on I2C 760 default n 761 help 762 If you say yes here you get support for Linear Technology LTC4151 763 High Voltage I2C Current and Voltage Monitor interface. 764 765 This driver can also be built as a module. If so, the module will 766 be called ltc4151. 767 768config SENSORS_LTC4215 769 tristate "Linear Technology LTC4215" 770 depends on I2C 771 default n 772 help 773 If you say yes here you get support for Linear Technology LTC4215 774 Hot Swap Controller I2C interface. 775 776 This driver can also be built as a module. If so, the module will 777 be called ltc4215. 778 779config SENSORS_LTC4245 780 tristate "Linear Technology LTC4245" 781 depends on I2C 782 default n 783 help 784 If you say yes here you get support for Linear Technology LTC4245 785 Multiple Supply Hot Swap Controller I2C interface. 786 787 This driver can also be built as a module. If so, the module will 788 be called ltc4245. 789 790config SENSORS_LTC4261 791 tristate "Linear Technology LTC4261" 792 depends on I2C 793 default n 794 help 795 If you say yes here you get support for Linear Technology LTC4261 796 Negative Voltage Hot Swap Controller I2C interface. 797 798 This driver can also be built as a module. If so, the module will 799 be called ltc4261. 800 801config SENSORS_LM95234 802 tristate "National Semiconductor LM95234" 803 depends on I2C 804 help 805 If you say yes here you get support for the LM95234 temperature 806 sensor. 807 808 This driver can also be built as a module. If so, the module 809 will be called lm95234. 810 811config SENSORS_LM95241 812 tristate "National Semiconductor LM95241 and compatibles" 813 depends on I2C 814 help 815 If you say yes here you get support for LM95231 and LM95241 sensor 816 chips. 817 818 This driver can also be built as a module. If so, the module 819 will be called lm95241. 820 821config SENSORS_LM95245 822 tristate "National Semiconductor LM95245 sensor chip" 823 depends on I2C 824 help 825 If you say yes here you get support for LM95245 sensor chip. 826 827 This driver can also be built as a module. If so, the module 828 will be called lm95245. 829 830config SENSORS_MAX1111 831 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 832 depends on SPI_MASTER 833 help 834 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 835 ADC chips. 836 837 This driver can also be built as a module. If so, the module 838 will be called max1111. 839 840config SENSORS_MAX16065 841 tristate "Maxim MAX16065 System Manager and compatibles" 842 depends on I2C 843 help 844 If you say yes here you get support for hardware monitoring 845 capabilities of the following Maxim System Manager chips. 846 MAX16065 847 MAX16066 848 MAX16067 849 MAX16068 850 MAX16070 851 MAX16071 852 853 This driver can also be built as a module. If so, the module 854 will be called max16065. 855 856config SENSORS_MAX1619 857 tristate "Maxim MAX1619 sensor chip" 858 depends on I2C 859 help 860 If you say yes here you get support for MAX1619 sensor chip. 861 862 This driver can also be built as a module. If so, the module 863 will be called max1619. 864 865config SENSORS_MAX1668 866 tristate "Maxim MAX1668 and compatibles" 867 depends on I2C 868 help 869 If you say yes here you get support for MAX1668, MAX1989 and 870 MAX1805 chips. 871 872 This driver can also be built as a module. If so, the module 873 will be called max1668. 874 875config SENSORS_MAX197 876 tristate "Maxim MAX197 and compatibles" 877 help 878 Support for the Maxim MAX197 A/D converter. 879 Support will include, but not be limited to, MAX197, and MAX199. 880 881 This driver can also be built as a module. If so, the module 882 will be called max197. 883 884config SENSORS_MAX6639 885 tristate "Maxim MAX6639 sensor chip" 886 depends on I2C 887 help 888 If you say yes here you get support for the MAX6639 889 sensor chips. 890 891 This driver can also be built as a module. If so, the module 892 will be called max6639. 893 894config SENSORS_MAX6642 895 tristate "Maxim MAX6642 sensor chip" 896 depends on I2C 897 help 898 If you say yes here you get support for MAX6642 sensor chip. 899 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor 900 with Overtemperature Alarm from Maxim. 901 902 This driver can also be built as a module. If so, the module 903 will be called max6642. 904 905config SENSORS_MAX6650 906 tristate "Maxim MAX6650 sensor chip" 907 depends on I2C 908 help 909 If you say yes here you get support for the MAX6650 / MAX6651 910 sensor chips. 911 912 This driver can also be built as a module. If so, the module 913 will be called max6650. 914 915config SENSORS_MAX6697 916 tristate "Maxim MAX6697 and compatibles" 917 depends on I2C 918 help 919 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 920 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 921 temperature sensor chips. 922 923 This driver can also be built as a module. If so, the module 924 will be called max6697. 925 926config SENSORS_MCP3021 927 tristate "Microchip MCP3021 and compatibles" 928 depends on I2C 929 help 930 If you say yes here you get support for MCP3021 and MCP3221. 931 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 932 with 12-bit resolution. 933 934 This driver can also be built as a module. If so, the module 935 will be called mcp3021. 936 937config SENSORS_NCT6775 938 tristate "Nuvoton NCT6775F and compatibles" 939 depends on !PPC 940 select HWMON_VID 941 help 942 If you say yes here you get support for the hardware monitoring 943 functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D 944 and compatible Super-I/O chips. This driver replaces the 945 w83627ehf driver for NCT6775F and NCT6776F. 946 947 This driver can also be built as a module. If so, the module 948 will be called nct6775. 949 950config SENSORS_NTC_THERMISTOR 951 tristate "NTC thermistor support" 952 depends on (!OF && !IIO) || (OF && IIO) 953 help 954 This driver supports NTC thermistors sensor reading and its 955 interpretation. The driver can also monitor the temperature and 956 send notifications about the temperature. 957 958 Currently, this driver supports 959 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. 960 961 This driver can also be built as a module. If so, the module 962 will be called ntc-thermistor. 963 964config SENSORS_PC87360 965 tristate "National Semiconductor PC87360 family" 966 depends on !PPC 967 select HWMON_VID 968 help 969 If you say yes here you get access to the hardware monitoring 970 functions of the National Semiconductor PC8736x Super-I/O chips. 971 The PC87360, PC87363 and PC87364 only have fan monitoring and 972 control. The PC87365 and PC87366 additionally have voltage and 973 temperature monitoring. 974 975 This driver can also be built as a module. If so, the module 976 will be called pc87360. 977 978config SENSORS_PC87427 979 tristate "National Semiconductor PC87427" 980 depends on !PPC 981 help 982 If you say yes here you get access to the hardware monitoring 983 functions of the National Semiconductor PC87427 Super-I/O chip. 984 The chip has two distinct logical devices, one for fan speed 985 monitoring and control, and one for voltage and temperature 986 monitoring. Fan speed monitoring and control are supported, as 987 well as temperature monitoring. Voltages aren't supported yet. 988 989 This driver can also be built as a module. If so, the module 990 will be called pc87427. 991 992config SENSORS_PCF8591 993 tristate "Philips PCF8591 ADC/DAC" 994 depends on I2C 995 default n 996 help 997 If you say yes here you get support for Philips PCF8591 4-channel 998 ADC, 1-channel DAC chips. 999 1000 This driver can also be built as a module. If so, the module 1001 will be called pcf8591. 1002 1003 These devices are hard to detect and rarely found on mainstream 1004 hardware. If unsure, say N. 1005 1006source drivers/hwmon/pmbus/Kconfig 1007 1008config SENSORS_SHT15 1009 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1010 depends on GPIOLIB 1011 help 1012 If you say yes here you get support for the Sensiron SHT10, SHT11, 1013 SHT15, SHT71, SHT75 humidity and temperature sensors. 1014 1015 This driver can also be built as a module. If so, the module 1016 will be called sht15. 1017 1018config SENSORS_SHT21 1019 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1020 depends on I2C 1021 help 1022 If you say yes here you get support for the Sensiron SHT21, SHT25 1023 humidity and temperature sensors. 1024 1025 This driver can also be built as a module. If so, the module 1026 will be called sht21. 1027 1028config SENSORS_S3C 1029 tristate "Samsung built-in ADC" 1030 depends on S3C_ADC 1031 help 1032 If you say yes here you get support for the on-board ADCs of 1033 the Samsung S3C24XX, S3C64XX and other series of SoC 1034 1035 This driver can also be built as a module. If so, the module 1036 will be called s3c-hwmon. 1037 1038config SENSORS_S3C_RAW 1039 bool "Include raw channel attributes in sysfs" 1040 depends on SENSORS_S3C 1041 help 1042 Say Y here if you want to include raw copies of all the ADC 1043 channels in sysfs. 1044 1045config SENSORS_SIS5595 1046 tristate "Silicon Integrated Systems Corp. SiS5595" 1047 depends on PCI 1048 help 1049 If you say yes here you get support for the integrated sensors in 1050 SiS5595 South Bridges. 1051 1052 This driver can also be built as a module. If so, the module 1053 will be called sis5595. 1054 1055config SENSORS_SMM665 1056 tristate "Summit Microelectronics SMM665" 1057 depends on I2C 1058 default n 1059 help 1060 If you say yes here you get support for the hardware monitoring 1061 features of the Summit Microelectronics SMM665/SMM665B Six-Channel 1062 Active DC Output Controller / Monitor. 1063 1064 Other supported chips are SMM465, SMM665C, SMM764, and SMM766. 1065 Support for those chips is untested. 1066 1067 This driver can also be built as a module. If so, the module will 1068 be called smm665. 1069 1070config SENSORS_DME1737 1071 tristate "SMSC DME1737, SCH311x and compatibles" 1072 depends on I2C && !PPC 1073 select HWMON_VID 1074 help 1075 If you say yes here you get support for the hardware monitoring 1076 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1077 Asus A8000 Super-I/O chips. 1078 1079 This driver can also be built as a module. If so, the module 1080 will be called dme1737. 1081 1082config SENSORS_EMC1403 1083 tristate "SMSC EMC1403/23 thermal sensor" 1084 depends on I2C 1085 help 1086 If you say yes here you get support for the SMSC EMC1403/23 1087 temperature monitoring chip. 1088 1089 Threshold values can be configured using sysfs. 1090 Data from the different diodes are accessible via sysfs. 1091 1092config SENSORS_EMC2103 1093 tristate "SMSC EMC2103" 1094 depends on I2C 1095 help 1096 If you say yes here you get support for the temperature 1097 and fan sensors of the SMSC EMC2103 chips. 1098 1099 This driver can also be built as a module. If so, the module 1100 will be called emc2103. 1101 1102config SENSORS_EMC6W201 1103 tristate "SMSC EMC6W201" 1104 depends on I2C 1105 help 1106 If you say yes here you get support for the SMSC EMC6W201 1107 hardware monitoring chip. 1108 1109 This driver can also be built as a module. If so, the module 1110 will be called emc6w201. 1111 1112config SENSORS_SMSC47M1 1113 tristate "SMSC LPC47M10x and compatibles" 1114 depends on !PPC 1115 help 1116 If you say yes here you get support for the integrated fan 1117 monitoring and control capabilities of the SMSC LPC47B27x, 1118 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1119 LPC47M192, LPC47M292 and LPC47M997 chips. 1120 1121 The temperature and voltage sensor features of the LPC47M15x, 1122 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1123 driver, select also "SMSC LPC47M192 and compatibles" below for 1124 those. 1125 1126 This driver can also be built as a module. If so, the module 1127 will be called smsc47m1. 1128 1129config SENSORS_SMSC47M192 1130 tristate "SMSC LPC47M192 and compatibles" 1131 depends on I2C 1132 select HWMON_VID 1133 help 1134 If you say yes here you get support for the temperature and 1135 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1136 and LPC47M997 chips. 1137 1138 The fan monitoring and control capabilities of these chips 1139 are supported by another driver, select 1140 "SMSC LPC47M10x and compatibles" above. You need both drivers 1141 if you want fan control and voltage/temperature sensor support. 1142 1143 This driver can also be built as a module. If so, the module 1144 will be called smsc47m192. 1145 1146config SENSORS_SMSC47B397 1147 tristate "SMSC LPC47B397-NC" 1148 depends on !PPC 1149 help 1150 If you say yes here you get support for the SMSC LPC47B397-NC 1151 sensor chip. 1152 1153 This driver can also be built as a module. If so, the module 1154 will be called smsc47b397. 1155 1156config SENSORS_SCH56XX_COMMON 1157 tristate 1158 default n 1159 1160config SENSORS_SCH5627 1161 tristate "SMSC SCH5627" 1162 depends on !PPC && WATCHDOG 1163 select SENSORS_SCH56XX_COMMON 1164 select WATCHDOG_CORE 1165 help 1166 If you say yes here you get support for the hardware monitoring 1167 features of the SMSC SCH5627 Super-I/O chip including support for 1168 the integrated watchdog. 1169 1170 This driver can also be built as a module. If so, the module 1171 will be called sch5627. 1172 1173config SENSORS_SCH5636 1174 tristate "SMSC SCH5636" 1175 depends on !PPC && WATCHDOG 1176 select SENSORS_SCH56XX_COMMON 1177 select WATCHDOG_CORE 1178 help 1179 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 1180 hardware monitoring solutions, allowing motherboard manufacturers to 1181 create their own custom hwmon solution based upon the SCH5636. 1182 1183 Currently this driver only supports the Fujitsu Theseus SCH5636 based 1184 hwmon solution. Say yes here if you want support for the Fujitsu 1185 Theseus' hardware monitoring features including support for the 1186 integrated watchdog. 1187 1188 This driver can also be built as a module. If so, the module 1189 will be called sch5636. 1190 1191config SENSORS_ADS1015 1192 tristate "Texas Instruments ADS1015" 1193 depends on I2C 1194 help 1195 If you say yes here you get support for Texas Instruments ADS1015 1196 12-bit 4-input ADC device. 1197 1198 This driver can also be built as a module. If so, the module 1199 will be called ads1015. 1200 1201config SENSORS_ADS7828 1202 tristate "Texas Instruments ADS7828 and compatibles" 1203 depends on I2C 1204 help 1205 If you say yes here you get support for Texas Instruments ADS7828 and 1206 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 1207 it is 8-bit on ADS7830. 1208 1209 This driver can also be built as a module. If so, the module 1210 will be called ads7828. 1211 1212config SENSORS_ADS7871 1213 tristate "Texas Instruments ADS7871 A/D converter" 1214 depends on SPI 1215 help 1216 If you say yes here you get support for TI ADS7871 & ADS7870 1217 1218 This driver can also be built as a module. If so, the module 1219 will be called ads7871. 1220 1221config SENSORS_AMC6821 1222 tristate "Texas Instruments AMC6821" 1223 depends on I2C 1224 help 1225 If you say yes here you get support for the Texas Instruments 1226 AMC6821 hardware monitoring chips. 1227 1228 This driver can also be build as a module. If so, the module 1229 will be called amc6821. 1230 1231config SENSORS_INA209 1232 tristate "TI / Burr Brown INA209" 1233 depends on I2C 1234 help 1235 If you say yes here you get support for the TI / Burr Brown INA209 1236 voltage / current / power monitor I2C interface. 1237 1238 This driver can also be built as a module. If so, the module will 1239 be called ina209. 1240 1241config SENSORS_INA2XX 1242 tristate "Texas Instruments INA219 and compatibles" 1243 depends on I2C 1244 help 1245 If you say yes here you get support for INA219, INA220, INA226, and 1246 INA230 power monitor chips. 1247 1248 The INA2xx driver is configured for the default configuration of 1249 the part as described in the datasheet. 1250 Default value for Rshunt is 10 mOhms. 1251 This driver can also be built as a module. If so, the module 1252 will be called ina2xx. 1253 1254config SENSORS_THMC50 1255 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 1256 depends on I2C 1257 help 1258 If you say yes here you get support for Texas Instruments THMC50 1259 sensor chips and clones: the Analog Devices ADM1022. 1260 1261 This driver can also be built as a module. If so, the module 1262 will be called thmc50. 1263 1264config SENSORS_TMP102 1265 tristate "Texas Instruments TMP102" 1266 depends on I2C 1267 help 1268 If you say yes here you get support for Texas Instruments TMP102 1269 sensor chips. 1270 1271 This driver can also be built as a module. If so, the module 1272 will be called tmp102. 1273 1274config SENSORS_TMP401 1275 tristate "Texas Instruments TMP401 and compatibles" 1276 depends on I2C 1277 help 1278 If you say yes here you get support for Texas Instruments TMP401, 1279 TMP411, TMP431, and TMP432 temperature sensor chips. 1280 1281 This driver can also be built as a module. If so, the module 1282 will be called tmp401. 1283 1284config SENSORS_TMP421 1285 tristate "Texas Instruments TMP421 and compatible" 1286 depends on I2C 1287 help 1288 If you say yes here you get support for Texas Instruments TMP421, 1289 TMP422 and TMP423 temperature sensor chips. 1290 1291 This driver can also be built as a module. If so, the module 1292 will be called tmp421. 1293 1294config SENSORS_TWL4030_MADC 1295 tristate "Texas Instruments TWL4030 MADC Hwmon" 1296 depends on TWL4030_MADC 1297 help 1298 If you say yes here you get hwmon support for triton 1299 TWL4030-MADC. 1300 1301 This driver can also be built as a module. If so it will be called 1302 twl4030-madc-hwmon. 1303 1304config SENSORS_VEXPRESS 1305 tristate "Versatile Express" 1306 depends on VEXPRESS_CONFIG 1307 help 1308 This driver provides support for hardware sensors available on 1309 the ARM Ltd's Versatile Express platform. It can provide wide 1310 range of information like temperature, power, energy. 1311 1312config SENSORS_VIA_CPUTEMP 1313 tristate "VIA CPU temperature sensor" 1314 depends on X86 1315 select HWMON_VID 1316 help 1317 If you say yes here you get support for the temperature 1318 sensor inside your CPU. Supported are all known variants of 1319 the VIA C7 and Nano. 1320 1321config SENSORS_VIA686A 1322 tristate "VIA686A" 1323 depends on PCI 1324 help 1325 If you say yes here you get support for the integrated sensors in 1326 Via 686A/B South Bridges. 1327 1328 This driver can also be built as a module. If so, the module 1329 will be called via686a. 1330 1331config SENSORS_VT1211 1332 tristate "VIA VT1211" 1333 depends on !PPC 1334 select HWMON_VID 1335 help 1336 If you say yes here then you get support for hardware monitoring 1337 features of the VIA VT1211 Super-I/O chip. 1338 1339 This driver can also be built as a module. If so, the module 1340 will be called vt1211. 1341 1342config SENSORS_VT8231 1343 tristate "VIA VT8231" 1344 depends on PCI 1345 select HWMON_VID 1346 help 1347 If you say yes here then you get support for the integrated sensors 1348 in the VIA VT8231 device. 1349 1350 This driver can also be built as a module. If so, the module 1351 will be called vt8231. 1352 1353config SENSORS_W83781D 1354 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 1355 depends on I2C 1356 select HWMON_VID 1357 help 1358 If you say yes here you get support for the Winbond W8378x series 1359 of sensor chips: the W83781D, W83782D and W83783S, and the similar 1360 Asus AS99127F. 1361 1362 This driver can also be built as a module. If so, the module 1363 will be called w83781d. 1364 1365config SENSORS_W83791D 1366 tristate "Winbond W83791D" 1367 depends on I2C 1368 select HWMON_VID 1369 help 1370 If you say yes here you get support for the Winbond W83791D chip. 1371 1372 This driver can also be built as a module. If so, the module 1373 will be called w83791d. 1374 1375config SENSORS_W83792D 1376 tristate "Winbond W83792D" 1377 depends on I2C 1378 help 1379 If you say yes here you get support for the Winbond W83792D chip. 1380 1381 This driver can also be built as a module. If so, the module 1382 will be called w83792d. 1383 1384config SENSORS_W83793 1385 tristate "Winbond W83793" 1386 depends on I2C 1387 select HWMON_VID 1388 help 1389 If you say yes here you get support for the Winbond W83793 1390 hardware monitoring chip, including support for the integrated 1391 watchdog. 1392 1393 This driver can also be built as a module. If so, the module 1394 will be called w83793. 1395 1396config SENSORS_W83795 1397 tristate "Winbond/Nuvoton W83795G/ADG" 1398 depends on I2C 1399 help 1400 If you say yes here you get support for the Winbond W83795G and 1401 W83795ADG hardware monitoring chip, including manual fan speed 1402 control. 1403 1404 This driver can also be built as a module. If so, the module 1405 will be called w83795. 1406 1407config SENSORS_W83795_FANCTRL 1408 boolean "Include automatic fan control support (DANGEROUS)" 1409 depends on SENSORS_W83795 1410 default n 1411 help 1412 If you say yes here, support for automatic fan speed control 1413 will be included in the driver. 1414 1415 This part of the code wasn't carefully reviewed and tested yet, 1416 so enabling this option is strongly discouraged on production 1417 servers. Only developers and testers should enable it for the 1418 time being. 1419 1420 Please also note that this option will create sysfs attribute 1421 files which may change in the future, so you shouldn't rely 1422 on them being stable. 1423 1424config SENSORS_W83L785TS 1425 tristate "Winbond W83L785TS-S" 1426 depends on I2C 1427 help 1428 If you say yes here you get support for the Winbond W83L785TS-S 1429 sensor chip, which is used on the Asus A7N8X, among other 1430 motherboards. 1431 1432 This driver can also be built as a module. If so, the module 1433 will be called w83l785ts. 1434 1435config SENSORS_W83L786NG 1436 tristate "Winbond W83L786NG, W83L786NR" 1437 depends on I2C 1438 help 1439 If you say yes here you get support for the Winbond W83L786NG 1440 and W83L786NR sensor chips. 1441 1442 This driver can also be built as a module. If so, the module 1443 will be called w83l786ng. 1444 1445config SENSORS_W83627HF 1446 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 1447 depends on !PPC 1448 select HWMON_VID 1449 help 1450 If you say yes here you get support for the Winbond W836X7 series 1451 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 1452 W83697HF. 1453 1454 This driver can also be built as a module. If so, the module 1455 will be called w83627hf. 1456 1457config SENSORS_W83627EHF 1458 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" 1459 depends on !PPC 1460 select HWMON_VID 1461 help 1462 If you say yes here you get support for the hardware 1463 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 1464 1465 This driver also supports the W83627EHG, which is the lead-free 1466 version of the W83627EHF, and the W83627DHG, which is a similar 1467 chip suited for specific Intel processors that use PECI such as 1468 the Core 2 Duo. And also the W83627UHG, which is a stripped down 1469 version of the W83627DHG (as far as hardware monitoring goes.) 1470 1471 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F 1472 (also known as W83667HG-I), and NCT6776F. 1473 1474 This driver can also be built as a module. If so, the module 1475 will be called w83627ehf. 1476 1477config SENSORS_WM831X 1478 tristate "WM831x PMICs" 1479 depends on MFD_WM831X 1480 help 1481 If you say yes here you get support for the hardware 1482 monitoring functionality of the Wolfson Microelectronics 1483 WM831x series of PMICs. 1484 1485 This driver can also be built as a module. If so, the module 1486 will be called wm831x-hwmon. 1487 1488config SENSORS_WM8350 1489 tristate "Wolfson Microelectronics WM835x" 1490 depends on MFD_WM8350 1491 help 1492 If you say yes here you get support for the hardware 1493 monitoring features of the WM835x series of PMICs. 1494 1495 This driver can also be built as a module. If so, the module 1496 will be called wm8350-hwmon. 1497 1498config SENSORS_ULTRA45 1499 tristate "Sun Ultra45 PIC16F747" 1500 depends on SPARC64 1501 help 1502 This driver provides support for the Ultra45 workstation environmental 1503 sensors. 1504 1505config SENSORS_APPLESMC 1506 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 1507 depends on INPUT && X86 1508 select NEW_LEDS 1509 select LEDS_CLASS 1510 select INPUT_POLLDEV 1511 default n 1512 help 1513 This driver provides support for the Apple System Management 1514 Controller, which provides an accelerometer (Apple Sudden Motion 1515 Sensor), light sensors, temperature sensors, keyboard backlight 1516 control and fan control. 1517 1518 Only Intel-based Apple's computers are supported (MacBook Pro, 1519 MacBook, MacMini). 1520 1521 Data from the different sensors, keyboard backlight control and fan 1522 control are accessible via sysfs. 1523 1524 This driver also provides an absolute input class device, allowing 1525 the laptop to act as a pinball machine-esque joystick. 1526 1527 Say Y here if you have an applicable laptop and want to experience 1528 the awesome power of applesmc. 1529 1530config SENSORS_MC13783_ADC 1531 tristate "Freescale MC13783/MC13892 ADC" 1532 depends on MFD_MC13XXX 1533 help 1534 Support for the A/D converter on MC13783 and MC13892 PMIC. 1535 1536if ACPI 1537 1538comment "ACPI drivers" 1539 1540config SENSORS_ACPI_POWER 1541 tristate "ACPI 4.0 power meter" 1542 help 1543 This driver exposes ACPI 4.0 power meters as hardware monitoring 1544 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 1545 and a power meter. 1546 1547 To compile this driver as a module, choose M here: 1548 the module will be called acpi_power_meter. 1549 1550config SENSORS_ATK0110 1551 tristate "ASUS ATK0110" 1552 depends on X86 1553 help 1554 If you say yes here you get support for the ACPI hardware 1555 monitoring interface found in many ASUS motherboards. This 1556 driver will provide readings of fans, voltages and temperatures 1557 through the system firmware. 1558 1559 This driver can also be built as a module. If so, the module 1560 will be called asus_atk0110. 1561 1562endif # ACPI 1563 1564endif # HWMON 1565