dme1737.c revision b55f375725ff85aada394da488802b0a3cc99e88
1/* 2 * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x, SCH5027, 3 * and SCH5127 Super-I/O chips integrated hardware monitoring 4 * features. 5 * Copyright (c) 2007, 2008, 2009, 2010 Juerg Haefliger <juergh@gmail.com> 6 * 7 * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access 8 * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus 9 * if a SCH311x or SCH5127 chip is found. Both types of chips have very 10 * similar hardware monitoring capabilities but differ in the way they can be 11 * accessed. 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30#include <linux/module.h> 31#include <linux/init.h> 32#include <linux/slab.h> 33#include <linux/jiffies.h> 34#include <linux/i2c.h> 35#include <linux/platform_device.h> 36#include <linux/hwmon.h> 37#include <linux/hwmon-sysfs.h> 38#include <linux/hwmon-vid.h> 39#include <linux/err.h> 40#include <linux/mutex.h> 41#include <linux/acpi.h> 42#include <linux/io.h> 43 44/* ISA device, if found */ 45static struct platform_device *pdev; 46 47/* Module load parameters */ 48static bool force_start; 49module_param(force_start, bool, 0); 50MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs"); 51 52static unsigned short force_id; 53module_param(force_id, ushort, 0); 54MODULE_PARM_DESC(force_id, "Override the detected device ID"); 55 56static bool probe_all_addr; 57module_param(probe_all_addr, bool, 0); 58MODULE_PARM_DESC(probe_all_addr, 59 "Include probing of non-standard LPC addresses"); 60 61/* Addresses to scan */ 62static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; 63 64enum chips { dme1737, sch5027, sch311x, sch5127 }; 65 66#define DO_REPORT "Please report to the driver maintainer." 67 68/* --------------------------------------------------------------------- 69 * Registers 70 * 71 * The sensors are defined as follows: 72 * 73 * Voltages Temperatures 74 * -------- ------------ 75 * in0 +5VTR (+5V stdby) temp1 Remote diode 1 76 * in1 Vccp (proc core) temp2 Internal temp 77 * in2 VCC (internal +3.3V) temp3 Remote diode 2 78 * in3 +5V 79 * in4 +12V 80 * in5 VTR (+3.3V stby) 81 * in6 Vbat 82 * in7 Vtrip (sch5127 only) 83 * 84 * --------------------------------------------------------------------- */ 85 86/* Voltages (in) numbered 0-7 (ix) */ 87#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) : \ 88 (ix) < 7 ? 0x94 + (ix) : \ 89 0x1f) 90#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \ 91 : 0x91 + (ix) * 2) 92#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \ 93 : 0x92 + (ix) * 2) 94 95/* Temperatures (temp) numbered 0-2 (ix) */ 96#define DME1737_REG_TEMP(ix) (0x25 + (ix)) 97#define DME1737_REG_TEMP_MIN(ix) (0x4e + (ix) * 2) 98#define DME1737_REG_TEMP_MAX(ix) (0x4f + (ix) * 2) 99#define DME1737_REG_TEMP_OFFSET(ix) ((ix) == 0 ? 0x1f \ 100 : 0x1c + (ix)) 101 102/* 103 * Voltage and temperature LSBs 104 * The LSBs (4 bits each) are stored in 5 registers with the following layouts: 105 * IN_TEMP_LSB(0) = [in5, in6] 106 * IN_TEMP_LSB(1) = [temp3, temp1] 107 * IN_TEMP_LSB(2) = [in4, temp2] 108 * IN_TEMP_LSB(3) = [in3, in0] 109 * IN_TEMP_LSB(4) = [in2, in1] 110 * IN_TEMP_LSB(5) = [res, in7] 111 */ 112#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix)) 113static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5}; 114static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4}; 115static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1}; 116static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0}; 117 118/* Fans numbered 0-5 (ix) */ 119#define DME1737_REG_FAN(ix) ((ix) < 4 ? 0x28 + (ix) * 2 \ 120 : 0xa1 + (ix) * 2) 121#define DME1737_REG_FAN_MIN(ix) ((ix) < 4 ? 0x54 + (ix) * 2 \ 122 : 0xa5 + (ix) * 2) 123#define DME1737_REG_FAN_OPT(ix) ((ix) < 4 ? 0x90 + (ix) \ 124 : 0xb2 + (ix)) 125#define DME1737_REG_FAN_MAX(ix) (0xb4 + (ix)) /* only for fan[4-5] */ 126 127/* PWMs numbered 0-2, 4-5 (ix) */ 128#define DME1737_REG_PWM(ix) ((ix) < 3 ? 0x30 + (ix) \ 129 : 0xa1 + (ix)) 130#define DME1737_REG_PWM_CONFIG(ix) (0x5c + (ix)) /* only for pwm[0-2] */ 131#define DME1737_REG_PWM_MIN(ix) (0x64 + (ix)) /* only for pwm[0-2] */ 132#define DME1737_REG_PWM_FREQ(ix) ((ix) < 3 ? 0x5f + (ix) \ 133 : 0xa3 + (ix)) 134/* 135 * The layout of the ramp rate registers is different from the other pwm 136 * registers. The bits for the 3 PWMs are stored in 2 registers: 137 * PWM_RR(0) = [OFF3, OFF2, OFF1, RES, RR1E, RR1-2, RR1-1, RR1-0] 138 * PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0] 139 */ 140#define DME1737_REG_PWM_RR(ix) (0x62 + (ix)) /* only for pwm[0-2] */ 141 142/* Thermal zones 0-2 */ 143#define DME1737_REG_ZONE_LOW(ix) (0x67 + (ix)) 144#define DME1737_REG_ZONE_ABS(ix) (0x6a + (ix)) 145/* 146 * The layout of the hysteresis registers is different from the other zone 147 * registers. The bits for the 3 zones are stored in 2 registers: 148 * ZONE_HYST(0) = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0] 149 * ZONE_HYST(1) = [H3-3, H3-2, H3-1, H3-0, RES, RES, RES, RES] 150 */ 151#define DME1737_REG_ZONE_HYST(ix) (0x6d + (ix)) 152 153/* 154 * Alarm registers and bit mapping 155 * The 3 8-bit alarm registers will be concatenated to a single 32-bit 156 * alarm value [0, ALARM3, ALARM2, ALARM1]. 157 */ 158#define DME1737_REG_ALARM1 0x41 159#define DME1737_REG_ALARM2 0x42 160#define DME1737_REG_ALARM3 0x83 161static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18}; 162static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6}; 163static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23}; 164 165/* Miscellaneous registers */ 166#define DME1737_REG_DEVICE 0x3d 167#define DME1737_REG_COMPANY 0x3e 168#define DME1737_REG_VERSTEP 0x3f 169#define DME1737_REG_CONFIG 0x40 170#define DME1737_REG_CONFIG2 0x7f 171#define DME1737_REG_VID 0x43 172#define DME1737_REG_TACH_PWM 0x81 173 174/* --------------------------------------------------------------------- 175 * Misc defines 176 * --------------------------------------------------------------------- */ 177 178/* Chip identification */ 179#define DME1737_COMPANY_SMSC 0x5c 180#define DME1737_VERSTEP 0x88 181#define DME1737_VERSTEP_MASK 0xf8 182#define SCH311X_DEVICE 0x8c 183#define SCH5027_VERSTEP 0x69 184#define SCH5127_DEVICE 0x8e 185 186/* Device ID values (global configuration register index 0x20) */ 187#define DME1737_ID_1 0x77 188#define DME1737_ID_2 0x78 189#define SCH3112_ID 0x7c 190#define SCH3114_ID 0x7d 191#define SCH3116_ID 0x7f 192#define SCH5027_ID 0x89 193#define SCH5127_ID 0x86 194 195/* Length of ISA address segment */ 196#define DME1737_EXTENT 2 197 198/* chip-dependent features */ 199#define HAS_TEMP_OFFSET (1 << 0) /* bit 0 */ 200#define HAS_VID (1 << 1) /* bit 1 */ 201#define HAS_ZONE3 (1 << 2) /* bit 2 */ 202#define HAS_ZONE_HYST (1 << 3) /* bit 3 */ 203#define HAS_PWM_MIN (1 << 4) /* bit 4 */ 204#define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */ 205#define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */ 206#define HAS_IN7 (1 << 17) /* bit 17 */ 207 208/* --------------------------------------------------------------------- 209 * Data structures and manipulation thereof 210 * --------------------------------------------------------------------- */ 211 212struct dme1737_data { 213 struct i2c_client *client; /* for I2C devices only */ 214 struct device *hwmon_dev; 215 const char *name; 216 unsigned int addr; /* for ISA devices only */ 217 218 struct mutex update_lock; 219 int valid; /* !=0 if following fields are valid */ 220 unsigned long last_update; /* in jiffies */ 221 unsigned long last_vbat; /* in jiffies */ 222 enum chips type; 223 const int *in_nominal; /* pointer to IN_NOMINAL array */ 224 225 u8 vid; 226 u8 pwm_rr_en; 227 u32 has_features; 228 229 /* Register values */ 230 u16 in[8]; 231 u8 in_min[8]; 232 u8 in_max[8]; 233 s16 temp[3]; 234 s8 temp_min[3]; 235 s8 temp_max[3]; 236 s8 temp_offset[3]; 237 u8 config; 238 u8 config2; 239 u8 vrm; 240 u16 fan[6]; 241 u16 fan_min[6]; 242 u8 fan_max[2]; 243 u8 fan_opt[6]; 244 u8 pwm[6]; 245 u8 pwm_min[3]; 246 u8 pwm_config[3]; 247 u8 pwm_acz[3]; 248 u8 pwm_freq[6]; 249 u8 pwm_rr[2]; 250 u8 zone_low[3]; 251 u8 zone_abs[3]; 252 u8 zone_hyst[2]; 253 u32 alarms; 254}; 255 256/* Nominal voltage values */ 257static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, 258 3300}; 259static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, 260 3300}; 261static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300, 262 3300}; 263static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300, 264 3300, 1500}; 265#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \ 266 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \ 267 (type) == sch5127 ? IN_NOMINAL_SCH5127 : \ 268 IN_NOMINAL_DME1737) 269 270/* 271 * Voltage input 272 * Voltage inputs have 16 bits resolution, limit values have 8 bits 273 * resolution. 274 */ 275static inline int IN_FROM_REG(int reg, int nominal, int res) 276{ 277 return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2)); 278} 279 280static inline int IN_TO_REG(int val, int nominal) 281{ 282 return clamp_val((val * 192 + nominal / 2) / nominal, 0, 255); 283} 284 285/* 286 * Temperature input 287 * The register values represent temperatures in 2's complement notation from 288 * -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit 289 * values have 8 bits resolution. 290 */ 291static inline int TEMP_FROM_REG(int reg, int res) 292{ 293 return (reg * 1000) >> (res - 8); 294} 295 296static inline int TEMP_TO_REG(int val) 297{ 298 return clamp_val((val < 0 ? val - 500 : val + 500) / 1000, -128, 127); 299} 300 301/* Temperature range */ 302static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000, 303 10000, 13333, 16000, 20000, 26666, 32000, 304 40000, 53333, 80000}; 305 306static inline int TEMP_RANGE_FROM_REG(int reg) 307{ 308 return TEMP_RANGE[(reg >> 4) & 0x0f]; 309} 310 311static int TEMP_RANGE_TO_REG(int val, int reg) 312{ 313 int i; 314 315 for (i = 15; i > 0; i--) { 316 if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2) 317 break; 318 } 319 320 return (reg & 0x0f) | (i << 4); 321} 322 323/* 324 * Temperature hysteresis 325 * Register layout: 326 * reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0] 327 * reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx] 328 */ 329static inline int TEMP_HYST_FROM_REG(int reg, int ix) 330{ 331 return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000; 332} 333 334static inline int TEMP_HYST_TO_REG(int val, int ix, int reg) 335{ 336 int hyst = clamp_val((val + 500) / 1000, 0, 15); 337 338 return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4); 339} 340 341/* Fan input RPM */ 342static inline int FAN_FROM_REG(int reg, int tpc) 343{ 344 if (tpc) 345 return tpc * reg; 346 else 347 return (reg == 0 || reg == 0xffff) ? 0 : 90000 * 60 / reg; 348} 349 350static inline int FAN_TO_REG(int val, int tpc) 351{ 352 if (tpc) { 353 return clamp_val(val / tpc, 0, 0xffff); 354 } else { 355 return (val <= 0) ? 0xffff : 356 clamp_val(90000 * 60 / val, 0, 0xfffe); 357 } 358} 359 360/* 361 * Fan TPC (tach pulse count) 362 * Converts a register value to a TPC multiplier or returns 0 if the tachometer 363 * is configured in legacy (non-tpc) mode 364 */ 365static inline int FAN_TPC_FROM_REG(int reg) 366{ 367 return (reg & 0x20) ? 0 : 60 >> (reg & 0x03); 368} 369 370/* 371 * Fan type 372 * The type of a fan is expressed in number of pulses-per-revolution that it 373 * emits 374 */ 375static inline int FAN_TYPE_FROM_REG(int reg) 376{ 377 int edge = (reg >> 1) & 0x03; 378 379 return (edge > 0) ? 1 << (edge - 1) : 0; 380} 381 382static inline int FAN_TYPE_TO_REG(int val, int reg) 383{ 384 int edge = (val == 4) ? 3 : val; 385 386 return (reg & 0xf9) | (edge << 1); 387} 388 389/* Fan max RPM */ 390static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12, 391 0x11, 0x0f, 0x0e}; 392 393static int FAN_MAX_FROM_REG(int reg) 394{ 395 int i; 396 397 for (i = 10; i > 0; i--) { 398 if (reg == FAN_MAX[i]) 399 break; 400 } 401 402 return 1000 + i * 500; 403} 404 405static int FAN_MAX_TO_REG(int val) 406{ 407 int i; 408 409 for (i = 10; i > 0; i--) { 410 if (val > (1000 + (i - 1) * 500)) 411 break; 412 } 413 414 return FAN_MAX[i]; 415} 416 417/* 418 * PWM enable 419 * Register to enable mapping: 420 * 000: 2 fan on zone 1 auto 421 * 001: 2 fan on zone 2 auto 422 * 010: 2 fan on zone 3 auto 423 * 011: 0 fan full on 424 * 100: -1 fan disabled 425 * 101: 2 fan on hottest of zones 2,3 auto 426 * 110: 2 fan on hottest of zones 1,2,3 auto 427 * 111: 1 fan in manual mode 428 */ 429static inline int PWM_EN_FROM_REG(int reg) 430{ 431 static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1}; 432 433 return en[(reg >> 5) & 0x07]; 434} 435 436static inline int PWM_EN_TO_REG(int val, int reg) 437{ 438 int en = (val == 1) ? 7 : 3; 439 440 return (reg & 0x1f) | ((en & 0x07) << 5); 441} 442 443/* 444 * PWM auto channels zone 445 * Register to auto channels zone mapping (ACZ is a bitfield with bit x 446 * corresponding to zone x+1): 447 * 000: 001 fan on zone 1 auto 448 * 001: 010 fan on zone 2 auto 449 * 010: 100 fan on zone 3 auto 450 * 011: 000 fan full on 451 * 100: 000 fan disabled 452 * 101: 110 fan on hottest of zones 2,3 auto 453 * 110: 111 fan on hottest of zones 1,2,3 auto 454 * 111: 000 fan in manual mode 455 */ 456static inline int PWM_ACZ_FROM_REG(int reg) 457{ 458 static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0}; 459 460 return acz[(reg >> 5) & 0x07]; 461} 462 463static inline int PWM_ACZ_TO_REG(int val, int reg) 464{ 465 int acz = (val == 4) ? 2 : val - 1; 466 467 return (reg & 0x1f) | ((acz & 0x07) << 5); 468} 469 470/* PWM frequency */ 471static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88, 472 15000, 20000, 30000, 25000, 0, 0, 0, 0}; 473 474static inline int PWM_FREQ_FROM_REG(int reg) 475{ 476 return PWM_FREQ[reg & 0x0f]; 477} 478 479static int PWM_FREQ_TO_REG(int val, int reg) 480{ 481 int i; 482 483 /* the first two cases are special - stupid chip design! */ 484 if (val > 27500) { 485 i = 10; 486 } else if (val > 22500) { 487 i = 11; 488 } else { 489 for (i = 9; i > 0; i--) { 490 if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2) 491 break; 492 } 493 } 494 495 return (reg & 0xf0) | i; 496} 497 498/* 499 * PWM ramp rate 500 * Register layout: 501 * reg[0] = [OFF3, OFF2, OFF1, RES, RR1-E, RR1-2, RR1-1, RR1-0] 502 * reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0] 503 */ 504static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5}; 505 506static inline int PWM_RR_FROM_REG(int reg, int ix) 507{ 508 int rr = (ix == 1) ? reg >> 4 : reg; 509 510 return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0; 511} 512 513static int PWM_RR_TO_REG(int val, int ix, int reg) 514{ 515 int i; 516 517 for (i = 0; i < 7; i++) { 518 if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2) 519 break; 520 } 521 522 return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i; 523} 524 525/* PWM ramp rate enable */ 526static inline int PWM_RR_EN_FROM_REG(int reg, int ix) 527{ 528 return PWM_RR_FROM_REG(reg, ix) ? 1 : 0; 529} 530 531static inline int PWM_RR_EN_TO_REG(int val, int ix, int reg) 532{ 533 int en = (ix == 1) ? 0x80 : 0x08; 534 535 return val ? reg | en : reg & ~en; 536} 537 538/* 539 * PWM min/off 540 * The PWM min/off bits are part of the PMW ramp rate register 0 (see above for 541 * the register layout). 542 */ 543static inline int PWM_OFF_FROM_REG(int reg, int ix) 544{ 545 return (reg >> (ix + 5)) & 0x01; 546} 547 548static inline int PWM_OFF_TO_REG(int val, int ix, int reg) 549{ 550 return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5)); 551} 552 553/* --------------------------------------------------------------------- 554 * Device I/O access 555 * 556 * ISA access is performed through an index/data register pair and needs to 557 * be protected by a mutex during runtime (not required for initialization). 558 * We use data->update_lock for this and need to ensure that we acquire it 559 * before calling dme1737_read or dme1737_write. 560 * --------------------------------------------------------------------- */ 561 562static u8 dme1737_read(const struct dme1737_data *data, u8 reg) 563{ 564 struct i2c_client *client = data->client; 565 s32 val; 566 567 if (client) { /* I2C device */ 568 val = i2c_smbus_read_byte_data(client, reg); 569 570 if (val < 0) { 571 dev_warn(&client->dev, 572 "Read from register 0x%02x failed! %s\n", 573 reg, DO_REPORT); 574 } 575 } else { /* ISA device */ 576 outb(reg, data->addr); 577 val = inb(data->addr + 1); 578 } 579 580 return val; 581} 582 583static s32 dme1737_write(const struct dme1737_data *data, u8 reg, u8 val) 584{ 585 struct i2c_client *client = data->client; 586 s32 res = 0; 587 588 if (client) { /* I2C device */ 589 res = i2c_smbus_write_byte_data(client, reg, val); 590 591 if (res < 0) { 592 dev_warn(&client->dev, 593 "Write to register 0x%02x failed! %s\n", 594 reg, DO_REPORT); 595 } 596 } else { /* ISA device */ 597 outb(reg, data->addr); 598 outb(val, data->addr + 1); 599 } 600 601 return res; 602} 603 604static struct dme1737_data *dme1737_update_device(struct device *dev) 605{ 606 struct dme1737_data *data = dev_get_drvdata(dev); 607 int ix; 608 u8 lsb[6]; 609 610 mutex_lock(&data->update_lock); 611 612 /* Enable a Vbat monitoring cycle every 10 mins */ 613 if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) { 614 dme1737_write(data, DME1737_REG_CONFIG, dme1737_read(data, 615 DME1737_REG_CONFIG) | 0x10); 616 data->last_vbat = jiffies; 617 } 618 619 /* Sample register contents every 1 sec */ 620 if (time_after(jiffies, data->last_update + HZ) || !data->valid) { 621 if (data->has_features & HAS_VID) { 622 data->vid = dme1737_read(data, DME1737_REG_VID) & 623 0x3f; 624 } 625 626 /* In (voltage) registers */ 627 for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { 628 /* 629 * Voltage inputs are stored as 16 bit values even 630 * though they have only 12 bits resolution. This is 631 * to make it consistent with the temp inputs. 632 */ 633 if (ix == 7 && !(data->has_features & HAS_IN7)) 634 continue; 635 data->in[ix] = dme1737_read(data, 636 DME1737_REG_IN(ix)) << 8; 637 data->in_min[ix] = dme1737_read(data, 638 DME1737_REG_IN_MIN(ix)); 639 data->in_max[ix] = dme1737_read(data, 640 DME1737_REG_IN_MAX(ix)); 641 } 642 643 /* Temp registers */ 644 for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) { 645 /* 646 * Temp inputs are stored as 16 bit values even 647 * though they have only 12 bits resolution. This is 648 * to take advantage of implicit conversions between 649 * register values (2's complement) and temp values 650 * (signed decimal). 651 */ 652 data->temp[ix] = dme1737_read(data, 653 DME1737_REG_TEMP(ix)) << 8; 654 data->temp_min[ix] = dme1737_read(data, 655 DME1737_REG_TEMP_MIN(ix)); 656 data->temp_max[ix] = dme1737_read(data, 657 DME1737_REG_TEMP_MAX(ix)); 658 if (data->has_features & HAS_TEMP_OFFSET) { 659 data->temp_offset[ix] = dme1737_read(data, 660 DME1737_REG_TEMP_OFFSET(ix)); 661 } 662 } 663 664 /* 665 * In and temp LSB registers 666 * The LSBs are latched when the MSBs are read, so the order in 667 * which the registers are read (MSB first, then LSB) is 668 * important! 669 */ 670 for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) { 671 if (ix == 5 && !(data->has_features & HAS_IN7)) 672 continue; 673 lsb[ix] = dme1737_read(data, 674 DME1737_REG_IN_TEMP_LSB(ix)); 675 } 676 for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { 677 if (ix == 7 && !(data->has_features & HAS_IN7)) 678 continue; 679 data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] << 680 DME1737_REG_IN_LSB_SHL[ix]) & 0xf0; 681 } 682 for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) { 683 data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] << 684 DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0; 685 } 686 687 /* Fan registers */ 688 for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) { 689 /* 690 * Skip reading registers if optional fans are not 691 * present 692 */ 693 if (!(data->has_features & HAS_FAN(ix))) 694 continue; 695 data->fan[ix] = dme1737_read(data, 696 DME1737_REG_FAN(ix)); 697 data->fan[ix] |= dme1737_read(data, 698 DME1737_REG_FAN(ix) + 1) << 8; 699 data->fan_min[ix] = dme1737_read(data, 700 DME1737_REG_FAN_MIN(ix)); 701 data->fan_min[ix] |= dme1737_read(data, 702 DME1737_REG_FAN_MIN(ix) + 1) << 8; 703 data->fan_opt[ix] = dme1737_read(data, 704 DME1737_REG_FAN_OPT(ix)); 705 /* fan_max exists only for fan[5-6] */ 706 if (ix > 3) { 707 data->fan_max[ix - 4] = dme1737_read(data, 708 DME1737_REG_FAN_MAX(ix)); 709 } 710 } 711 712 /* PWM registers */ 713 for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) { 714 /* 715 * Skip reading registers if optional PWMs are not 716 * present 717 */ 718 if (!(data->has_features & HAS_PWM(ix))) 719 continue; 720 data->pwm[ix] = dme1737_read(data, 721 DME1737_REG_PWM(ix)); 722 data->pwm_freq[ix] = dme1737_read(data, 723 DME1737_REG_PWM_FREQ(ix)); 724 /* pwm_config and pwm_min exist only for pwm[1-3] */ 725 if (ix < 3) { 726 data->pwm_config[ix] = dme1737_read(data, 727 DME1737_REG_PWM_CONFIG(ix)); 728 data->pwm_min[ix] = dme1737_read(data, 729 DME1737_REG_PWM_MIN(ix)); 730 } 731 } 732 for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) { 733 data->pwm_rr[ix] = dme1737_read(data, 734 DME1737_REG_PWM_RR(ix)); 735 } 736 737 /* Thermal zone registers */ 738 for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) { 739 /* Skip reading registers if zone3 is not present */ 740 if ((ix == 2) && !(data->has_features & HAS_ZONE3)) 741 continue; 742 /* sch5127 zone2 registers are special */ 743 if ((ix == 1) && (data->type == sch5127)) { 744 data->zone_low[1] = dme1737_read(data, 745 DME1737_REG_ZONE_LOW(2)); 746 data->zone_abs[1] = dme1737_read(data, 747 DME1737_REG_ZONE_ABS(2)); 748 } else { 749 data->zone_low[ix] = dme1737_read(data, 750 DME1737_REG_ZONE_LOW(ix)); 751 data->zone_abs[ix] = dme1737_read(data, 752 DME1737_REG_ZONE_ABS(ix)); 753 } 754 } 755 if (data->has_features & HAS_ZONE_HYST) { 756 for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { 757 data->zone_hyst[ix] = dme1737_read(data, 758 DME1737_REG_ZONE_HYST(ix)); 759 } 760 } 761 762 /* Alarm registers */ 763 data->alarms = dme1737_read(data, 764 DME1737_REG_ALARM1); 765 /* 766 * Bit 7 tells us if the other alarm registers are non-zero and 767 * therefore also need to be read 768 */ 769 if (data->alarms & 0x80) { 770 data->alarms |= dme1737_read(data, 771 DME1737_REG_ALARM2) << 8; 772 data->alarms |= dme1737_read(data, 773 DME1737_REG_ALARM3) << 16; 774 } 775 776 /* 777 * The ISA chips require explicit clearing of alarm bits. 778 * Don't worry, an alarm will come back if the condition 779 * that causes it still exists 780 */ 781 if (!data->client) { 782 if (data->alarms & 0xff0000) 783 dme1737_write(data, DME1737_REG_ALARM3, 0xff); 784 if (data->alarms & 0xff00) 785 dme1737_write(data, DME1737_REG_ALARM2, 0xff); 786 if (data->alarms & 0xff) 787 dme1737_write(data, DME1737_REG_ALARM1, 0xff); 788 } 789 790 data->last_update = jiffies; 791 data->valid = 1; 792 } 793 794 mutex_unlock(&data->update_lock); 795 796 return data; 797} 798 799/* --------------------------------------------------------------------- 800 * Voltage sysfs attributes 801 * ix = [0-7] 802 * --------------------------------------------------------------------- */ 803 804#define SYS_IN_INPUT 0 805#define SYS_IN_MIN 1 806#define SYS_IN_MAX 2 807#define SYS_IN_ALARM 3 808 809static ssize_t show_in(struct device *dev, struct device_attribute *attr, 810 char *buf) 811{ 812 struct dme1737_data *data = dme1737_update_device(dev); 813 struct sensor_device_attribute_2 814 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 815 int ix = sensor_attr_2->index; 816 int fn = sensor_attr_2->nr; 817 int res; 818 819 switch (fn) { 820 case SYS_IN_INPUT: 821 res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16); 822 break; 823 case SYS_IN_MIN: 824 res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8); 825 break; 826 case SYS_IN_MAX: 827 res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8); 828 break; 829 case SYS_IN_ALARM: 830 res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; 831 break; 832 default: 833 res = 0; 834 dev_dbg(dev, "Unknown function %d.\n", fn); 835 } 836 837 return sprintf(buf, "%d\n", res); 838} 839 840static ssize_t set_in(struct device *dev, struct device_attribute *attr, 841 const char *buf, size_t count) 842{ 843 struct dme1737_data *data = dev_get_drvdata(dev); 844 struct sensor_device_attribute_2 845 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 846 int ix = sensor_attr_2->index; 847 int fn = sensor_attr_2->nr; 848 long val; 849 int err; 850 851 err = kstrtol(buf, 10, &val); 852 if (err) 853 return err; 854 855 mutex_lock(&data->update_lock); 856 switch (fn) { 857 case SYS_IN_MIN: 858 data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]); 859 dme1737_write(data, DME1737_REG_IN_MIN(ix), 860 data->in_min[ix]); 861 break; 862 case SYS_IN_MAX: 863 data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]); 864 dme1737_write(data, DME1737_REG_IN_MAX(ix), 865 data->in_max[ix]); 866 break; 867 default: 868 dev_dbg(dev, "Unknown function %d.\n", fn); 869 } 870 mutex_unlock(&data->update_lock); 871 872 return count; 873} 874 875/* --------------------------------------------------------------------- 876 * Temperature sysfs attributes 877 * ix = [0-2] 878 * --------------------------------------------------------------------- */ 879 880#define SYS_TEMP_INPUT 0 881#define SYS_TEMP_MIN 1 882#define SYS_TEMP_MAX 2 883#define SYS_TEMP_OFFSET 3 884#define SYS_TEMP_ALARM 4 885#define SYS_TEMP_FAULT 5 886 887static ssize_t show_temp(struct device *dev, struct device_attribute *attr, 888 char *buf) 889{ 890 struct dme1737_data *data = dme1737_update_device(dev); 891 struct sensor_device_attribute_2 892 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 893 int ix = sensor_attr_2->index; 894 int fn = sensor_attr_2->nr; 895 int res; 896 897 switch (fn) { 898 case SYS_TEMP_INPUT: 899 res = TEMP_FROM_REG(data->temp[ix], 16); 900 break; 901 case SYS_TEMP_MIN: 902 res = TEMP_FROM_REG(data->temp_min[ix], 8); 903 break; 904 case SYS_TEMP_MAX: 905 res = TEMP_FROM_REG(data->temp_max[ix], 8); 906 break; 907 case SYS_TEMP_OFFSET: 908 res = TEMP_FROM_REG(data->temp_offset[ix], 8); 909 break; 910 case SYS_TEMP_ALARM: 911 res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01; 912 break; 913 case SYS_TEMP_FAULT: 914 res = (((u16)data->temp[ix] & 0xff00) == 0x8000); 915 break; 916 default: 917 res = 0; 918 dev_dbg(dev, "Unknown function %d.\n", fn); 919 } 920 921 return sprintf(buf, "%d\n", res); 922} 923 924static ssize_t set_temp(struct device *dev, struct device_attribute *attr, 925 const char *buf, size_t count) 926{ 927 struct dme1737_data *data = dev_get_drvdata(dev); 928 struct sensor_device_attribute_2 929 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 930 int ix = sensor_attr_2->index; 931 int fn = sensor_attr_2->nr; 932 long val; 933 int err; 934 935 err = kstrtol(buf, 10, &val); 936 if (err) 937 return err; 938 939 mutex_lock(&data->update_lock); 940 switch (fn) { 941 case SYS_TEMP_MIN: 942 data->temp_min[ix] = TEMP_TO_REG(val); 943 dme1737_write(data, DME1737_REG_TEMP_MIN(ix), 944 data->temp_min[ix]); 945 break; 946 case SYS_TEMP_MAX: 947 data->temp_max[ix] = TEMP_TO_REG(val); 948 dme1737_write(data, DME1737_REG_TEMP_MAX(ix), 949 data->temp_max[ix]); 950 break; 951 case SYS_TEMP_OFFSET: 952 data->temp_offset[ix] = TEMP_TO_REG(val); 953 dme1737_write(data, DME1737_REG_TEMP_OFFSET(ix), 954 data->temp_offset[ix]); 955 break; 956 default: 957 dev_dbg(dev, "Unknown function %d.\n", fn); 958 } 959 mutex_unlock(&data->update_lock); 960 961 return count; 962} 963 964/* --------------------------------------------------------------------- 965 * Zone sysfs attributes 966 * ix = [0-2] 967 * --------------------------------------------------------------------- */ 968 969#define SYS_ZONE_AUTO_CHANNELS_TEMP 0 970#define SYS_ZONE_AUTO_POINT1_TEMP_HYST 1 971#define SYS_ZONE_AUTO_POINT1_TEMP 2 972#define SYS_ZONE_AUTO_POINT2_TEMP 3 973#define SYS_ZONE_AUTO_POINT3_TEMP 4 974 975static ssize_t show_zone(struct device *dev, struct device_attribute *attr, 976 char *buf) 977{ 978 struct dme1737_data *data = dme1737_update_device(dev); 979 struct sensor_device_attribute_2 980 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 981 int ix = sensor_attr_2->index; 982 int fn = sensor_attr_2->nr; 983 int res; 984 985 switch (fn) { 986 case SYS_ZONE_AUTO_CHANNELS_TEMP: 987 /* check config2 for non-standard temp-to-zone mapping */ 988 if ((ix == 1) && (data->config2 & 0x02)) 989 res = 4; 990 else 991 res = 1 << ix; 992 break; 993 case SYS_ZONE_AUTO_POINT1_TEMP_HYST: 994 res = TEMP_FROM_REG(data->zone_low[ix], 8) - 995 TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix); 996 break; 997 case SYS_ZONE_AUTO_POINT1_TEMP: 998 res = TEMP_FROM_REG(data->zone_low[ix], 8); 999 break; 1000 case SYS_ZONE_AUTO_POINT2_TEMP: 1001 /* pwm_freq holds the temp range bits in the upper nibble */ 1002 res = TEMP_FROM_REG(data->zone_low[ix], 8) + 1003 TEMP_RANGE_FROM_REG(data->pwm_freq[ix]); 1004 break; 1005 case SYS_ZONE_AUTO_POINT3_TEMP: 1006 res = TEMP_FROM_REG(data->zone_abs[ix], 8); 1007 break; 1008 default: 1009 res = 0; 1010 dev_dbg(dev, "Unknown function %d.\n", fn); 1011 } 1012 1013 return sprintf(buf, "%d\n", res); 1014} 1015 1016static ssize_t set_zone(struct device *dev, struct device_attribute *attr, 1017 const char *buf, size_t count) 1018{ 1019 struct dme1737_data *data = dev_get_drvdata(dev); 1020 struct sensor_device_attribute_2 1021 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 1022 int ix = sensor_attr_2->index; 1023 int fn = sensor_attr_2->nr; 1024 long val; 1025 int err; 1026 1027 err = kstrtol(buf, 10, &val); 1028 if (err) 1029 return err; 1030 1031 mutex_lock(&data->update_lock); 1032 switch (fn) { 1033 case SYS_ZONE_AUTO_POINT1_TEMP_HYST: 1034 /* Refresh the cache */ 1035 data->zone_low[ix] = dme1737_read(data, 1036 DME1737_REG_ZONE_LOW(ix)); 1037 /* Modify the temp hyst value */ 1038 data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG( 1039 TEMP_FROM_REG(data->zone_low[ix], 8) - 1040 val, ix, dme1737_read(data, 1041 DME1737_REG_ZONE_HYST(ix == 2))); 1042 dme1737_write(data, DME1737_REG_ZONE_HYST(ix == 2), 1043 data->zone_hyst[ix == 2]); 1044 break; 1045 case SYS_ZONE_AUTO_POINT1_TEMP: 1046 data->zone_low[ix] = TEMP_TO_REG(val); 1047 dme1737_write(data, DME1737_REG_ZONE_LOW(ix), 1048 data->zone_low[ix]); 1049 break; 1050 case SYS_ZONE_AUTO_POINT2_TEMP: 1051 /* Refresh the cache */ 1052 data->zone_low[ix] = dme1737_read(data, 1053 DME1737_REG_ZONE_LOW(ix)); 1054 /* 1055 * Modify the temp range value (which is stored in the upper 1056 * nibble of the pwm_freq register) 1057 */ 1058 data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val - 1059 TEMP_FROM_REG(data->zone_low[ix], 8), 1060 dme1737_read(data, 1061 DME1737_REG_PWM_FREQ(ix))); 1062 dme1737_write(data, DME1737_REG_PWM_FREQ(ix), 1063 data->pwm_freq[ix]); 1064 break; 1065 case SYS_ZONE_AUTO_POINT3_TEMP: 1066 data->zone_abs[ix] = TEMP_TO_REG(val); 1067 dme1737_write(data, DME1737_REG_ZONE_ABS(ix), 1068 data->zone_abs[ix]); 1069 break; 1070 default: 1071 dev_dbg(dev, "Unknown function %d.\n", fn); 1072 } 1073 mutex_unlock(&data->update_lock); 1074 1075 return count; 1076} 1077 1078/* --------------------------------------------------------------------- 1079 * Fan sysfs attributes 1080 * ix = [0-5] 1081 * --------------------------------------------------------------------- */ 1082 1083#define SYS_FAN_INPUT 0 1084#define SYS_FAN_MIN 1 1085#define SYS_FAN_MAX 2 1086#define SYS_FAN_ALARM 3 1087#define SYS_FAN_TYPE 4 1088 1089static ssize_t show_fan(struct device *dev, struct device_attribute *attr, 1090 char *buf) 1091{ 1092 struct dme1737_data *data = dme1737_update_device(dev); 1093 struct sensor_device_attribute_2 1094 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 1095 int ix = sensor_attr_2->index; 1096 int fn = sensor_attr_2->nr; 1097 int res; 1098 1099 switch (fn) { 1100 case SYS_FAN_INPUT: 1101 res = FAN_FROM_REG(data->fan[ix], 1102 ix < 4 ? 0 : 1103 FAN_TPC_FROM_REG(data->fan_opt[ix])); 1104 break; 1105 case SYS_FAN_MIN: 1106 res = FAN_FROM_REG(data->fan_min[ix], 1107 ix < 4 ? 0 : 1108 FAN_TPC_FROM_REG(data->fan_opt[ix])); 1109 break; 1110 case SYS_FAN_MAX: 1111 /* only valid for fan[5-6] */ 1112 res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]); 1113 break; 1114 case SYS_FAN_ALARM: 1115 res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01; 1116 break; 1117 case SYS_FAN_TYPE: 1118 /* only valid for fan[1-4] */ 1119 res = FAN_TYPE_FROM_REG(data->fan_opt[ix]); 1120 break; 1121 default: 1122 res = 0; 1123 dev_dbg(dev, "Unknown function %d.\n", fn); 1124 } 1125 1126 return sprintf(buf, "%d\n", res); 1127} 1128 1129static ssize_t set_fan(struct device *dev, struct device_attribute *attr, 1130 const char *buf, size_t count) 1131{ 1132 struct dme1737_data *data = dev_get_drvdata(dev); 1133 struct sensor_device_attribute_2 1134 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 1135 int ix = sensor_attr_2->index; 1136 int fn = sensor_attr_2->nr; 1137 long val; 1138 int err; 1139 1140 err = kstrtol(buf, 10, &val); 1141 if (err) 1142 return err; 1143 1144 mutex_lock(&data->update_lock); 1145 switch (fn) { 1146 case SYS_FAN_MIN: 1147 if (ix < 4) { 1148 data->fan_min[ix] = FAN_TO_REG(val, 0); 1149 } else { 1150 /* Refresh the cache */ 1151 data->fan_opt[ix] = dme1737_read(data, 1152 DME1737_REG_FAN_OPT(ix)); 1153 /* Modify the fan min value */ 1154 data->fan_min[ix] = FAN_TO_REG(val, 1155 FAN_TPC_FROM_REG(data->fan_opt[ix])); 1156 } 1157 dme1737_write(data, DME1737_REG_FAN_MIN(ix), 1158 data->fan_min[ix] & 0xff); 1159 dme1737_write(data, DME1737_REG_FAN_MIN(ix) + 1, 1160 data->fan_min[ix] >> 8); 1161 break; 1162 case SYS_FAN_MAX: 1163 /* Only valid for fan[5-6] */ 1164 data->fan_max[ix - 4] = FAN_MAX_TO_REG(val); 1165 dme1737_write(data, DME1737_REG_FAN_MAX(ix), 1166 data->fan_max[ix - 4]); 1167 break; 1168 case SYS_FAN_TYPE: 1169 /* Only valid for fan[1-4] */ 1170 if (!(val == 1 || val == 2 || val == 4)) { 1171 count = -EINVAL; 1172 dev_warn(dev, 1173 "Fan type value %ld not supported. Choose one of 1, 2, or 4.\n", 1174 val); 1175 goto exit; 1176 } 1177 data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(data, 1178 DME1737_REG_FAN_OPT(ix))); 1179 dme1737_write(data, DME1737_REG_FAN_OPT(ix), 1180 data->fan_opt[ix]); 1181 break; 1182 default: 1183 dev_dbg(dev, "Unknown function %d.\n", fn); 1184 } 1185exit: 1186 mutex_unlock(&data->update_lock); 1187 1188 return count; 1189} 1190 1191/* --------------------------------------------------------------------- 1192 * PWM sysfs attributes 1193 * ix = [0-4] 1194 * --------------------------------------------------------------------- */ 1195 1196#define SYS_PWM 0 1197#define SYS_PWM_FREQ 1 1198#define SYS_PWM_ENABLE 2 1199#define SYS_PWM_RAMP_RATE 3 1200#define SYS_PWM_AUTO_CHANNELS_ZONE 4 1201#define SYS_PWM_AUTO_PWM_MIN 5 1202#define SYS_PWM_AUTO_POINT1_PWM 6 1203#define SYS_PWM_AUTO_POINT2_PWM 7 1204 1205static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, 1206 char *buf) 1207{ 1208 struct dme1737_data *data = dme1737_update_device(dev); 1209 struct sensor_device_attribute_2 1210 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 1211 int ix = sensor_attr_2->index; 1212 int fn = sensor_attr_2->nr; 1213 int res; 1214 1215 switch (fn) { 1216 case SYS_PWM: 1217 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0) 1218 res = 255; 1219 else 1220 res = data->pwm[ix]; 1221 break; 1222 case SYS_PWM_FREQ: 1223 res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]); 1224 break; 1225 case SYS_PWM_ENABLE: 1226 if (ix >= 3) 1227 res = 1; /* pwm[5-6] hard-wired to manual mode */ 1228 else 1229 res = PWM_EN_FROM_REG(data->pwm_config[ix]); 1230 break; 1231 case SYS_PWM_RAMP_RATE: 1232 /* Only valid for pwm[1-3] */ 1233 res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix); 1234 break; 1235 case SYS_PWM_AUTO_CHANNELS_ZONE: 1236 /* Only valid for pwm[1-3] */ 1237 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) 1238 res = PWM_ACZ_FROM_REG(data->pwm_config[ix]); 1239 else 1240 res = data->pwm_acz[ix]; 1241 break; 1242 case SYS_PWM_AUTO_PWM_MIN: 1243 /* Only valid for pwm[1-3] */ 1244 if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix)) 1245 res = data->pwm_min[ix]; 1246 else 1247 res = 0; 1248 break; 1249 case SYS_PWM_AUTO_POINT1_PWM: 1250 /* Only valid for pwm[1-3] */ 1251 res = data->pwm_min[ix]; 1252 break; 1253 case SYS_PWM_AUTO_POINT2_PWM: 1254 /* Only valid for pwm[1-3] */ 1255 res = 255; /* hard-wired */ 1256 break; 1257 default: 1258 res = 0; 1259 dev_dbg(dev, "Unknown function %d.\n", fn); 1260 } 1261 1262 return sprintf(buf, "%d\n", res); 1263} 1264 1265static struct attribute *dme1737_pwm_chmod_attr[]; 1266static void dme1737_chmod_file(struct device*, struct attribute*, umode_t); 1267 1268static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, 1269 const char *buf, size_t count) 1270{ 1271 struct dme1737_data *data = dev_get_drvdata(dev); 1272 struct sensor_device_attribute_2 1273 *sensor_attr_2 = to_sensor_dev_attr_2(attr); 1274 int ix = sensor_attr_2->index; 1275 int fn = sensor_attr_2->nr; 1276 long val; 1277 int err; 1278 1279 err = kstrtol(buf, 10, &val); 1280 if (err) 1281 return err; 1282 1283 mutex_lock(&data->update_lock); 1284 switch (fn) { 1285 case SYS_PWM: 1286 data->pwm[ix] = clamp_val(val, 0, 255); 1287 dme1737_write(data, DME1737_REG_PWM(ix), data->pwm[ix]); 1288 break; 1289 case SYS_PWM_FREQ: 1290 data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(data, 1291 DME1737_REG_PWM_FREQ(ix))); 1292 dme1737_write(data, DME1737_REG_PWM_FREQ(ix), 1293 data->pwm_freq[ix]); 1294 break; 1295 case SYS_PWM_ENABLE: 1296 /* Only valid for pwm[1-3] */ 1297 if (val < 0 || val > 2) { 1298 count = -EINVAL; 1299 dev_warn(dev, 1300 "PWM enable %ld not supported. Choose one of 0, 1, or 2.\n", 1301 val); 1302 goto exit; 1303 } 1304 /* Refresh the cache */ 1305 data->pwm_config[ix] = dme1737_read(data, 1306 DME1737_REG_PWM_CONFIG(ix)); 1307 if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) { 1308 /* Bail out if no change */ 1309 goto exit; 1310 } 1311 /* Do some housekeeping if we are currently in auto mode */ 1312 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) { 1313 /* Save the current zone channel assignment */ 1314 data->pwm_acz[ix] = PWM_ACZ_FROM_REG( 1315 data->pwm_config[ix]); 1316 /* Save the current ramp rate state and disable it */ 1317 data->pwm_rr[ix > 0] = dme1737_read(data, 1318 DME1737_REG_PWM_RR(ix > 0)); 1319 data->pwm_rr_en &= ~(1 << ix); 1320 if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) { 1321 data->pwm_rr_en |= (1 << ix); 1322 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix, 1323 data->pwm_rr[ix > 0]); 1324 dme1737_write(data, 1325 DME1737_REG_PWM_RR(ix > 0), 1326 data->pwm_rr[ix > 0]); 1327 } 1328 } 1329 /* Set the new PWM mode */ 1330 switch (val) { 1331 case 0: 1332 /* Change permissions of pwm[ix] to read-only */ 1333 dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], 1334 S_IRUGO); 1335 /* Turn fan fully on */ 1336 data->pwm_config[ix] = PWM_EN_TO_REG(0, 1337 data->pwm_config[ix]); 1338 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), 1339 data->pwm_config[ix]); 1340 break; 1341 case 1: 1342 /* Turn on manual mode */ 1343 data->pwm_config[ix] = PWM_EN_TO_REG(1, 1344 data->pwm_config[ix]); 1345 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), 1346 data->pwm_config[ix]); 1347 /* Change permissions of pwm[ix] to read-writeable */ 1348 dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], 1349 S_IRUGO | S_IWUSR); 1350 break; 1351 case 2: 1352 /* Change permissions of pwm[ix] to read-only */ 1353 dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], 1354 S_IRUGO); 1355 /* 1356 * Turn on auto mode using the saved zone channel 1357 * assignment 1358 */ 1359 data->pwm_config[ix] = PWM_ACZ_TO_REG( 1360 data->pwm_acz[ix], 1361 data->pwm_config[ix]); 1362 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), 1363 data->pwm_config[ix]); 1364 /* Enable PWM ramp rate if previously enabled */ 1365 if (data->pwm_rr_en & (1 << ix)) { 1366 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix, 1367 dme1737_read(data, 1368 DME1737_REG_PWM_RR(ix > 0))); 1369 dme1737_write(data, 1370 DME1737_REG_PWM_RR(ix > 0), 1371 data->pwm_rr[ix > 0]); 1372 } 1373 break; 1374 } 1375 break; 1376 case SYS_PWM_RAMP_RATE: 1377 /* Only valid for pwm[1-3] */ 1378 /* Refresh the cache */ 1379 data->pwm_config[ix] = dme1737_read(data, 1380 DME1737_REG_PWM_CONFIG(ix)); 1381 data->pwm_rr[ix > 0] = dme1737_read(data, 1382 DME1737_REG_PWM_RR(ix > 0)); 1383 /* Set the ramp rate value */ 1384 if (val > 0) { 1385 data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix, 1386 data->pwm_rr[ix > 0]); 1387 } 1388 /* 1389 * Enable/disable the feature only if the associated PWM 1390 * output is in automatic mode. 1391 */ 1392 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) { 1393 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix, 1394 data->pwm_rr[ix > 0]); 1395 } 1396 dme1737_write(data, DME1737_REG_PWM_RR(ix > 0), 1397 data->pwm_rr[ix > 0]); 1398 break; 1399 case SYS_PWM_AUTO_CHANNELS_ZONE: 1400 /* Only valid for pwm[1-3] */ 1401 if (!(val == 1 || val == 2 || val == 4 || 1402 val == 6 || val == 7)) { 1403 count = -EINVAL; 1404 dev_warn(dev, 1405 "PWM auto channels zone %ld not supported. Choose one of 1, 2, 4, 6, " 1406 "or 7.\n", val); 1407 goto exit; 1408 } 1409 /* Refresh the cache */ 1410 data->pwm_config[ix] = dme1737_read(data, 1411 DME1737_REG_PWM_CONFIG(ix)); 1412 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) { 1413 /* 1414 * PWM is already in auto mode so update the temp 1415 * channel assignment 1416 */ 1417 data->pwm_config[ix] = PWM_ACZ_TO_REG(val, 1418 data->pwm_config[ix]); 1419 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), 1420 data->pwm_config[ix]); 1421 } else { 1422 /* 1423 * PWM is not in auto mode so we save the temp 1424 * channel assignment for later use 1425 */ 1426 data->pwm_acz[ix] = val; 1427 } 1428 break; 1429 case SYS_PWM_AUTO_PWM_MIN: 1430 /* Only valid for pwm[1-3] */ 1431 /* Refresh the cache */ 1432 data->pwm_min[ix] = dme1737_read(data, 1433 DME1737_REG_PWM_MIN(ix)); 1434 /* 1435 * There are only 2 values supported for the auto_pwm_min 1436 * value: 0 or auto_point1_pwm. So if the temperature drops 1437 * below the auto_point1_temp_hyst value, the fan either turns 1438 * off or runs at auto_point1_pwm duty-cycle. 1439 */ 1440 if (val > ((data->pwm_min[ix] + 1) / 2)) { 1441 data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix, 1442 dme1737_read(data, 1443 DME1737_REG_PWM_RR(0))); 1444 } else { 1445 data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix, 1446 dme1737_read(data, 1447 DME1737_REG_PWM_RR(0))); 1448 } 1449 dme1737_write(data, DME1737_REG_PWM_RR(0), 1450 data->pwm_rr[0]); 1451 break; 1452 case SYS_PWM_AUTO_POINT1_PWM: 1453 /* Only valid for pwm[1-3] */ 1454 data->pwm_min[ix] = clamp_val(val, 0, 255); 1455 dme1737_write(data, DME1737_REG_PWM_MIN(ix), 1456 data->pwm_min[ix]); 1457 break; 1458 default: 1459 dev_dbg(dev, "Unknown function %d.\n", fn); 1460 } 1461exit: 1462 mutex_unlock(&data->update_lock); 1463 1464 return count; 1465} 1466 1467/* --------------------------------------------------------------------- 1468 * Miscellaneous sysfs attributes 1469 * --------------------------------------------------------------------- */ 1470 1471static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, 1472 char *buf) 1473{ 1474 struct i2c_client *client = to_i2c_client(dev); 1475 struct dme1737_data *data = i2c_get_clientdata(client); 1476 1477 return sprintf(buf, "%d\n", data->vrm); 1478} 1479 1480static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, 1481 const char *buf, size_t count) 1482{ 1483 struct dme1737_data *data = dev_get_drvdata(dev); 1484 long val; 1485 int err; 1486 1487 err = kstrtol(buf, 10, &val); 1488 if (err) 1489 return err; 1490 1491 data->vrm = val; 1492 return count; 1493} 1494 1495static ssize_t show_vid(struct device *dev, struct device_attribute *attr, 1496 char *buf) 1497{ 1498 struct dme1737_data *data = dme1737_update_device(dev); 1499 1500 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); 1501} 1502 1503static ssize_t show_name(struct device *dev, struct device_attribute *attr, 1504 char *buf) 1505{ 1506 struct dme1737_data *data = dev_get_drvdata(dev); 1507 1508 return sprintf(buf, "%s\n", data->name); 1509} 1510 1511/* --------------------------------------------------------------------- 1512 * Sysfs device attribute defines and structs 1513 * --------------------------------------------------------------------- */ 1514 1515/* Voltages 0-7 */ 1516 1517#define SENSOR_DEVICE_ATTR_IN(ix) \ 1518static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \ 1519 show_in, NULL, SYS_IN_INPUT, ix); \ 1520static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \ 1521 show_in, set_in, SYS_IN_MIN, ix); \ 1522static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \ 1523 show_in, set_in, SYS_IN_MAX, ix); \ 1524static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \ 1525 show_in, NULL, SYS_IN_ALARM, ix) 1526 1527SENSOR_DEVICE_ATTR_IN(0); 1528SENSOR_DEVICE_ATTR_IN(1); 1529SENSOR_DEVICE_ATTR_IN(2); 1530SENSOR_DEVICE_ATTR_IN(3); 1531SENSOR_DEVICE_ATTR_IN(4); 1532SENSOR_DEVICE_ATTR_IN(5); 1533SENSOR_DEVICE_ATTR_IN(6); 1534SENSOR_DEVICE_ATTR_IN(7); 1535 1536/* Temperatures 1-3 */ 1537 1538#define SENSOR_DEVICE_ATTR_TEMP(ix) \ 1539static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \ 1540 show_temp, NULL, SYS_TEMP_INPUT, ix-1); \ 1541static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \ 1542 show_temp, set_temp, SYS_TEMP_MIN, ix-1); \ 1543static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \ 1544 show_temp, set_temp, SYS_TEMP_MAX, ix-1); \ 1545static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \ 1546 show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \ 1547static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \ 1548 show_temp, NULL, SYS_TEMP_ALARM, ix-1); \ 1549static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \ 1550 show_temp, NULL, SYS_TEMP_FAULT, ix-1) 1551 1552SENSOR_DEVICE_ATTR_TEMP(1); 1553SENSOR_DEVICE_ATTR_TEMP(2); 1554SENSOR_DEVICE_ATTR_TEMP(3); 1555 1556/* Zones 1-3 */ 1557 1558#define SENSOR_DEVICE_ATTR_ZONE(ix) \ 1559static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \ 1560 show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \ 1561static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \ 1562 show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \ 1563static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \ 1564 show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \ 1565static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \ 1566 show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \ 1567static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \ 1568 show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1) 1569 1570SENSOR_DEVICE_ATTR_ZONE(1); 1571SENSOR_DEVICE_ATTR_ZONE(2); 1572SENSOR_DEVICE_ATTR_ZONE(3); 1573 1574/* Fans 1-4 */ 1575 1576#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \ 1577static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \ 1578 show_fan, NULL, SYS_FAN_INPUT, ix-1); \ 1579static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \ 1580 show_fan, set_fan, SYS_FAN_MIN, ix-1); \ 1581static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \ 1582 show_fan, NULL, SYS_FAN_ALARM, ix-1); \ 1583static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \ 1584 show_fan, set_fan, SYS_FAN_TYPE, ix-1) 1585 1586SENSOR_DEVICE_ATTR_FAN_1TO4(1); 1587SENSOR_DEVICE_ATTR_FAN_1TO4(2); 1588SENSOR_DEVICE_ATTR_FAN_1TO4(3); 1589SENSOR_DEVICE_ATTR_FAN_1TO4(4); 1590 1591/* Fans 5-6 */ 1592 1593#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \ 1594static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \ 1595 show_fan, NULL, SYS_FAN_INPUT, ix-1); \ 1596static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \ 1597 show_fan, set_fan, SYS_FAN_MIN, ix-1); \ 1598static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \ 1599 show_fan, NULL, SYS_FAN_ALARM, ix-1); \ 1600static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \ 1601 show_fan, set_fan, SYS_FAN_MAX, ix-1) 1602 1603SENSOR_DEVICE_ATTR_FAN_5TO6(5); 1604SENSOR_DEVICE_ATTR_FAN_5TO6(6); 1605 1606/* PWMs 1-3 */ 1607 1608#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \ 1609static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \ 1610 show_pwm, set_pwm, SYS_PWM, ix-1); \ 1611static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \ 1612 show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \ 1613static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \ 1614 show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \ 1615static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \ 1616 show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \ 1617static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \ 1618 show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \ 1619static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \ 1620 show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \ 1621static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \ 1622 show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \ 1623static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \ 1624 show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1) 1625 1626SENSOR_DEVICE_ATTR_PWM_1TO3(1); 1627SENSOR_DEVICE_ATTR_PWM_1TO3(2); 1628SENSOR_DEVICE_ATTR_PWM_1TO3(3); 1629 1630/* PWMs 5-6 */ 1631 1632#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \ 1633static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \ 1634 show_pwm, set_pwm, SYS_PWM, ix-1); \ 1635static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \ 1636 show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \ 1637static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \ 1638 show_pwm, NULL, SYS_PWM_ENABLE, ix-1) 1639 1640SENSOR_DEVICE_ATTR_PWM_5TO6(5); 1641SENSOR_DEVICE_ATTR_PWM_5TO6(6); 1642 1643/* Misc */ 1644 1645static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); 1646static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); 1647static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */ 1648 1649/* 1650 * This struct holds all the attributes that are always present and need to be 1651 * created unconditionally. The attributes that need modification of their 1652 * permissions are created read-only and write permissions are added or removed 1653 * on the fly when required 1654 */ 1655static struct attribute *dme1737_attr[] = { 1656 /* Voltages */ 1657 &sensor_dev_attr_in0_input.dev_attr.attr, 1658 &sensor_dev_attr_in0_min.dev_attr.attr, 1659 &sensor_dev_attr_in0_max.dev_attr.attr, 1660 &sensor_dev_attr_in0_alarm.dev_attr.attr, 1661 &sensor_dev_attr_in1_input.dev_attr.attr, 1662 &sensor_dev_attr_in1_min.dev_attr.attr, 1663 &sensor_dev_attr_in1_max.dev_attr.attr, 1664 &sensor_dev_attr_in1_alarm.dev_attr.attr, 1665 &sensor_dev_attr_in2_input.dev_attr.attr, 1666 &sensor_dev_attr_in2_min.dev_attr.attr, 1667 &sensor_dev_attr_in2_max.dev_attr.attr, 1668 &sensor_dev_attr_in2_alarm.dev_attr.attr, 1669 &sensor_dev_attr_in3_input.dev_attr.attr, 1670 &sensor_dev_attr_in3_min.dev_attr.attr, 1671 &sensor_dev_attr_in3_max.dev_attr.attr, 1672 &sensor_dev_attr_in3_alarm.dev_attr.attr, 1673 &sensor_dev_attr_in4_input.dev_attr.attr, 1674 &sensor_dev_attr_in4_min.dev_attr.attr, 1675 &sensor_dev_attr_in4_max.dev_attr.attr, 1676 &sensor_dev_attr_in4_alarm.dev_attr.attr, 1677 &sensor_dev_attr_in5_input.dev_attr.attr, 1678 &sensor_dev_attr_in5_min.dev_attr.attr, 1679 &sensor_dev_attr_in5_max.dev_attr.attr, 1680 &sensor_dev_attr_in5_alarm.dev_attr.attr, 1681 &sensor_dev_attr_in6_input.dev_attr.attr, 1682 &sensor_dev_attr_in6_min.dev_attr.attr, 1683 &sensor_dev_attr_in6_max.dev_attr.attr, 1684 &sensor_dev_attr_in6_alarm.dev_attr.attr, 1685 /* Temperatures */ 1686 &sensor_dev_attr_temp1_input.dev_attr.attr, 1687 &sensor_dev_attr_temp1_min.dev_attr.attr, 1688 &sensor_dev_attr_temp1_max.dev_attr.attr, 1689 &sensor_dev_attr_temp1_alarm.dev_attr.attr, 1690 &sensor_dev_attr_temp1_fault.dev_attr.attr, 1691 &sensor_dev_attr_temp2_input.dev_attr.attr, 1692 &sensor_dev_attr_temp2_min.dev_attr.attr, 1693 &sensor_dev_attr_temp2_max.dev_attr.attr, 1694 &sensor_dev_attr_temp2_alarm.dev_attr.attr, 1695 &sensor_dev_attr_temp2_fault.dev_attr.attr, 1696 &sensor_dev_attr_temp3_input.dev_attr.attr, 1697 &sensor_dev_attr_temp3_min.dev_attr.attr, 1698 &sensor_dev_attr_temp3_max.dev_attr.attr, 1699 &sensor_dev_attr_temp3_alarm.dev_attr.attr, 1700 &sensor_dev_attr_temp3_fault.dev_attr.attr, 1701 /* Zones */ 1702 &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, 1703 &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, 1704 &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, 1705 &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, 1706 &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, 1707 &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, 1708 &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, 1709 &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, 1710 NULL 1711}; 1712 1713static const struct attribute_group dme1737_group = { 1714 .attrs = dme1737_attr, 1715}; 1716 1717/* 1718 * The following struct holds temp offset attributes, which are not available 1719 * in all chips. The following chips support them: 1720 * DME1737, SCH311x 1721 */ 1722static struct attribute *dme1737_temp_offset_attr[] = { 1723 &sensor_dev_attr_temp1_offset.dev_attr.attr, 1724 &sensor_dev_attr_temp2_offset.dev_attr.attr, 1725 &sensor_dev_attr_temp3_offset.dev_attr.attr, 1726 NULL 1727}; 1728 1729static const struct attribute_group dme1737_temp_offset_group = { 1730 .attrs = dme1737_temp_offset_attr, 1731}; 1732 1733/* 1734 * The following struct holds VID related attributes, which are not available 1735 * in all chips. The following chips support them: 1736 * DME1737 1737 */ 1738static struct attribute *dme1737_vid_attr[] = { 1739 &dev_attr_vrm.attr, 1740 &dev_attr_cpu0_vid.attr, 1741 NULL 1742}; 1743 1744static const struct attribute_group dme1737_vid_group = { 1745 .attrs = dme1737_vid_attr, 1746}; 1747 1748/* 1749 * The following struct holds temp zone 3 related attributes, which are not 1750 * available in all chips. The following chips support them: 1751 * DME1737, SCH311x, SCH5027 1752 */ 1753static struct attribute *dme1737_zone3_attr[] = { 1754 &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, 1755 &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, 1756 &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, 1757 &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, 1758 NULL 1759}; 1760 1761static const struct attribute_group dme1737_zone3_group = { 1762 .attrs = dme1737_zone3_attr, 1763}; 1764 1765 1766/* 1767 * The following struct holds temp zone hysteresis related attributes, which 1768 * are not available in all chips. The following chips support them: 1769 * DME1737, SCH311x 1770 */ 1771static struct attribute *dme1737_zone_hyst_attr[] = { 1772 &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, 1773 &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, 1774 &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, 1775 NULL 1776}; 1777 1778static const struct attribute_group dme1737_zone_hyst_group = { 1779 .attrs = dme1737_zone_hyst_attr, 1780}; 1781 1782/* 1783 * The following struct holds voltage in7 related attributes, which 1784 * are not available in all chips. The following chips support them: 1785 * SCH5127 1786 */ 1787static struct attribute *dme1737_in7_attr[] = { 1788 &sensor_dev_attr_in7_input.dev_attr.attr, 1789 &sensor_dev_attr_in7_min.dev_attr.attr, 1790 &sensor_dev_attr_in7_max.dev_attr.attr, 1791 &sensor_dev_attr_in7_alarm.dev_attr.attr, 1792 NULL 1793}; 1794 1795static const struct attribute_group dme1737_in7_group = { 1796 .attrs = dme1737_in7_attr, 1797}; 1798 1799/* 1800 * The following structs hold the PWM attributes, some of which are optional. 1801 * Their creation depends on the chip configuration which is determined during 1802 * module load. 1803 */ 1804static struct attribute *dme1737_pwm1_attr[] = { 1805 &sensor_dev_attr_pwm1.dev_attr.attr, 1806 &sensor_dev_attr_pwm1_freq.dev_attr.attr, 1807 &sensor_dev_attr_pwm1_enable.dev_attr.attr, 1808 &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, 1809 &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, 1810 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, 1811 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, 1812 NULL 1813}; 1814static struct attribute *dme1737_pwm2_attr[] = { 1815 &sensor_dev_attr_pwm2.dev_attr.attr, 1816 &sensor_dev_attr_pwm2_freq.dev_attr.attr, 1817 &sensor_dev_attr_pwm2_enable.dev_attr.attr, 1818 &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, 1819 &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, 1820 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, 1821 &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, 1822 NULL 1823}; 1824static struct attribute *dme1737_pwm3_attr[] = { 1825 &sensor_dev_attr_pwm3.dev_attr.attr, 1826 &sensor_dev_attr_pwm3_freq.dev_attr.attr, 1827 &sensor_dev_attr_pwm3_enable.dev_attr.attr, 1828 &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, 1829 &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, 1830 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, 1831 &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, 1832 NULL 1833}; 1834static struct attribute *dme1737_pwm5_attr[] = { 1835 &sensor_dev_attr_pwm5.dev_attr.attr, 1836 &sensor_dev_attr_pwm5_freq.dev_attr.attr, 1837 &sensor_dev_attr_pwm5_enable.dev_attr.attr, 1838 NULL 1839}; 1840static struct attribute *dme1737_pwm6_attr[] = { 1841 &sensor_dev_attr_pwm6.dev_attr.attr, 1842 &sensor_dev_attr_pwm6_freq.dev_attr.attr, 1843 &sensor_dev_attr_pwm6_enable.dev_attr.attr, 1844 NULL 1845}; 1846 1847static const struct attribute_group dme1737_pwm_group[] = { 1848 { .attrs = dme1737_pwm1_attr }, 1849 { .attrs = dme1737_pwm2_attr }, 1850 { .attrs = dme1737_pwm3_attr }, 1851 { .attrs = NULL }, 1852 { .attrs = dme1737_pwm5_attr }, 1853 { .attrs = dme1737_pwm6_attr }, 1854}; 1855 1856/* 1857 * The following struct holds auto PWM min attributes, which are not available 1858 * in all chips. Their creation depends on the chip type which is determined 1859 * during module load. 1860 */ 1861static struct attribute *dme1737_auto_pwm_min_attr[] = { 1862 &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, 1863 &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, 1864 &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, 1865}; 1866 1867/* 1868 * The following structs hold the fan attributes, some of which are optional. 1869 * Their creation depends on the chip configuration which is determined during 1870 * module load. 1871 */ 1872static struct attribute *dme1737_fan1_attr[] = { 1873 &sensor_dev_attr_fan1_input.dev_attr.attr, 1874 &sensor_dev_attr_fan1_min.dev_attr.attr, 1875 &sensor_dev_attr_fan1_alarm.dev_attr.attr, 1876 &sensor_dev_attr_fan1_type.dev_attr.attr, 1877 NULL 1878}; 1879static struct attribute *dme1737_fan2_attr[] = { 1880 &sensor_dev_attr_fan2_input.dev_attr.attr, 1881 &sensor_dev_attr_fan2_min.dev_attr.attr, 1882 &sensor_dev_attr_fan2_alarm.dev_attr.attr, 1883 &sensor_dev_attr_fan2_type.dev_attr.attr, 1884 NULL 1885}; 1886static struct attribute *dme1737_fan3_attr[] = { 1887 &sensor_dev_attr_fan3_input.dev_attr.attr, 1888 &sensor_dev_attr_fan3_min.dev_attr.attr, 1889 &sensor_dev_attr_fan3_alarm.dev_attr.attr, 1890 &sensor_dev_attr_fan3_type.dev_attr.attr, 1891 NULL 1892}; 1893static struct attribute *dme1737_fan4_attr[] = { 1894 &sensor_dev_attr_fan4_input.dev_attr.attr, 1895 &sensor_dev_attr_fan4_min.dev_attr.attr, 1896 &sensor_dev_attr_fan4_alarm.dev_attr.attr, 1897 &sensor_dev_attr_fan4_type.dev_attr.attr, 1898 NULL 1899}; 1900static struct attribute *dme1737_fan5_attr[] = { 1901 &sensor_dev_attr_fan5_input.dev_attr.attr, 1902 &sensor_dev_attr_fan5_min.dev_attr.attr, 1903 &sensor_dev_attr_fan5_alarm.dev_attr.attr, 1904 &sensor_dev_attr_fan5_max.dev_attr.attr, 1905 NULL 1906}; 1907static struct attribute *dme1737_fan6_attr[] = { 1908 &sensor_dev_attr_fan6_input.dev_attr.attr, 1909 &sensor_dev_attr_fan6_min.dev_attr.attr, 1910 &sensor_dev_attr_fan6_alarm.dev_attr.attr, 1911 &sensor_dev_attr_fan6_max.dev_attr.attr, 1912 NULL 1913}; 1914 1915static const struct attribute_group dme1737_fan_group[] = { 1916 { .attrs = dme1737_fan1_attr }, 1917 { .attrs = dme1737_fan2_attr }, 1918 { .attrs = dme1737_fan3_attr }, 1919 { .attrs = dme1737_fan4_attr }, 1920 { .attrs = dme1737_fan5_attr }, 1921 { .attrs = dme1737_fan6_attr }, 1922}; 1923 1924/* 1925 * The permissions of the following zone attributes are changed to read- 1926 * writeable if the chip is *not* locked. Otherwise they stay read-only. 1927 */ 1928static struct attribute *dme1737_zone_chmod_attr[] = { 1929 &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, 1930 &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, 1931 &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, 1932 &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, 1933 &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, 1934 &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, 1935 NULL 1936}; 1937 1938static const struct attribute_group dme1737_zone_chmod_group = { 1939 .attrs = dme1737_zone_chmod_attr, 1940}; 1941 1942 1943/* 1944 * The permissions of the following zone 3 attributes are changed to read- 1945 * writeable if the chip is *not* locked. Otherwise they stay read-only. 1946 */ 1947static struct attribute *dme1737_zone3_chmod_attr[] = { 1948 &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, 1949 &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, 1950 &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, 1951 NULL 1952}; 1953 1954static const struct attribute_group dme1737_zone3_chmod_group = { 1955 .attrs = dme1737_zone3_chmod_attr, 1956}; 1957 1958/* 1959 * The permissions of the following PWM attributes are changed to read- 1960 * writeable if the chip is *not* locked and the respective PWM is available. 1961 * Otherwise they stay read-only. 1962 */ 1963static struct attribute *dme1737_pwm1_chmod_attr[] = { 1964 &sensor_dev_attr_pwm1_freq.dev_attr.attr, 1965 &sensor_dev_attr_pwm1_enable.dev_attr.attr, 1966 &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, 1967 &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, 1968 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, 1969 NULL 1970}; 1971static struct attribute *dme1737_pwm2_chmod_attr[] = { 1972 &sensor_dev_attr_pwm2_freq.dev_attr.attr, 1973 &sensor_dev_attr_pwm2_enable.dev_attr.attr, 1974 &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, 1975 &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, 1976 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, 1977 NULL 1978}; 1979static struct attribute *dme1737_pwm3_chmod_attr[] = { 1980 &sensor_dev_attr_pwm3_freq.dev_attr.attr, 1981 &sensor_dev_attr_pwm3_enable.dev_attr.attr, 1982 &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, 1983 &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, 1984 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, 1985 NULL 1986}; 1987static struct attribute *dme1737_pwm5_chmod_attr[] = { 1988 &sensor_dev_attr_pwm5.dev_attr.attr, 1989 &sensor_dev_attr_pwm5_freq.dev_attr.attr, 1990 NULL 1991}; 1992static struct attribute *dme1737_pwm6_chmod_attr[] = { 1993 &sensor_dev_attr_pwm6.dev_attr.attr, 1994 &sensor_dev_attr_pwm6_freq.dev_attr.attr, 1995 NULL 1996}; 1997 1998static const struct attribute_group dme1737_pwm_chmod_group[] = { 1999 { .attrs = dme1737_pwm1_chmod_attr }, 2000 { .attrs = dme1737_pwm2_chmod_attr }, 2001 { .attrs = dme1737_pwm3_chmod_attr }, 2002 { .attrs = NULL }, 2003 { .attrs = dme1737_pwm5_chmod_attr }, 2004 { .attrs = dme1737_pwm6_chmod_attr }, 2005}; 2006 2007/* 2008 * Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the 2009 * chip is not locked. Otherwise they are read-only. 2010 */ 2011static struct attribute *dme1737_pwm_chmod_attr[] = { 2012 &sensor_dev_attr_pwm1.dev_attr.attr, 2013 &sensor_dev_attr_pwm2.dev_attr.attr, 2014 &sensor_dev_attr_pwm3.dev_attr.attr, 2015}; 2016 2017/* --------------------------------------------------------------------- 2018 * Super-IO functions 2019 * --------------------------------------------------------------------- */ 2020 2021static inline void dme1737_sio_enter(int sio_cip) 2022{ 2023 outb(0x55, sio_cip); 2024} 2025 2026static inline void dme1737_sio_exit(int sio_cip) 2027{ 2028 outb(0xaa, sio_cip); 2029} 2030 2031static inline int dme1737_sio_inb(int sio_cip, int reg) 2032{ 2033 outb(reg, sio_cip); 2034 return inb(sio_cip + 1); 2035} 2036 2037static inline void dme1737_sio_outb(int sio_cip, int reg, int val) 2038{ 2039 outb(reg, sio_cip); 2040 outb(val, sio_cip + 1); 2041} 2042 2043/* --------------------------------------------------------------------- 2044 * Device initialization 2045 * --------------------------------------------------------------------- */ 2046 2047static int dme1737_i2c_get_features(int, struct dme1737_data*); 2048 2049static void dme1737_chmod_file(struct device *dev, 2050 struct attribute *attr, umode_t mode) 2051{ 2052 if (sysfs_chmod_file(&dev->kobj, attr, mode)) { 2053 dev_warn(dev, "Failed to change permissions of %s.\n", 2054 attr->name); 2055 } 2056} 2057 2058static void dme1737_chmod_group(struct device *dev, 2059 const struct attribute_group *group, 2060 umode_t mode) 2061{ 2062 struct attribute **attr; 2063 2064 for (attr = group->attrs; *attr; attr++) 2065 dme1737_chmod_file(dev, *attr, mode); 2066} 2067 2068static void dme1737_remove_files(struct device *dev) 2069{ 2070 struct dme1737_data *data = dev_get_drvdata(dev); 2071 int ix; 2072 2073 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { 2074 if (data->has_features & HAS_FAN(ix)) { 2075 sysfs_remove_group(&dev->kobj, 2076 &dme1737_fan_group[ix]); 2077 } 2078 } 2079 2080 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) { 2081 if (data->has_features & HAS_PWM(ix)) { 2082 sysfs_remove_group(&dev->kobj, 2083 &dme1737_pwm_group[ix]); 2084 if ((data->has_features & HAS_PWM_MIN) && ix < 3) { 2085 sysfs_remove_file(&dev->kobj, 2086 dme1737_auto_pwm_min_attr[ix]); 2087 } 2088 } 2089 } 2090 2091 if (data->has_features & HAS_TEMP_OFFSET) 2092 sysfs_remove_group(&dev->kobj, &dme1737_temp_offset_group); 2093 if (data->has_features & HAS_VID) 2094 sysfs_remove_group(&dev->kobj, &dme1737_vid_group); 2095 if (data->has_features & HAS_ZONE3) 2096 sysfs_remove_group(&dev->kobj, &dme1737_zone3_group); 2097 if (data->has_features & HAS_ZONE_HYST) 2098 sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group); 2099 if (data->has_features & HAS_IN7) 2100 sysfs_remove_group(&dev->kobj, &dme1737_in7_group); 2101 sysfs_remove_group(&dev->kobj, &dme1737_group); 2102 2103 if (!data->client) 2104 sysfs_remove_file(&dev->kobj, &dev_attr_name.attr); 2105} 2106 2107static int dme1737_create_files(struct device *dev) 2108{ 2109 struct dme1737_data *data = dev_get_drvdata(dev); 2110 int err, ix; 2111 2112 /* Create a name attribute for ISA devices */ 2113 if (!data->client) { 2114 err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr); 2115 if (err) 2116 goto exit; 2117 } 2118 2119 /* Create standard sysfs attributes */ 2120 err = sysfs_create_group(&dev->kobj, &dme1737_group); 2121 if (err) 2122 goto exit_remove; 2123 2124 /* Create chip-dependent sysfs attributes */ 2125 if (data->has_features & HAS_TEMP_OFFSET) { 2126 err = sysfs_create_group(&dev->kobj, 2127 &dme1737_temp_offset_group); 2128 if (err) 2129 goto exit_remove; 2130 } 2131 if (data->has_features & HAS_VID) { 2132 err = sysfs_create_group(&dev->kobj, &dme1737_vid_group); 2133 if (err) 2134 goto exit_remove; 2135 } 2136 if (data->has_features & HAS_ZONE3) { 2137 err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group); 2138 if (err) 2139 goto exit_remove; 2140 } 2141 if (data->has_features & HAS_ZONE_HYST) { 2142 err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group); 2143 if (err) 2144 goto exit_remove; 2145 } 2146 if (data->has_features & HAS_IN7) { 2147 err = sysfs_create_group(&dev->kobj, &dme1737_in7_group); 2148 if (err) 2149 goto exit_remove; 2150 } 2151 2152 /* Create fan sysfs attributes */ 2153 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { 2154 if (data->has_features & HAS_FAN(ix)) { 2155 err = sysfs_create_group(&dev->kobj, 2156 &dme1737_fan_group[ix]); 2157 if (err) 2158 goto exit_remove; 2159 } 2160 } 2161 2162 /* Create PWM sysfs attributes */ 2163 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) { 2164 if (data->has_features & HAS_PWM(ix)) { 2165 err = sysfs_create_group(&dev->kobj, 2166 &dme1737_pwm_group[ix]); 2167 if (err) 2168 goto exit_remove; 2169 if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) { 2170 err = sysfs_create_file(&dev->kobj, 2171 dme1737_auto_pwm_min_attr[ix]); 2172 if (err) 2173 goto exit_remove; 2174 } 2175 } 2176 } 2177 2178 /* 2179 * Inform if the device is locked. Otherwise change the permissions of 2180 * selected attributes from read-only to read-writeable. 2181 */ 2182 if (data->config & 0x02) { 2183 dev_info(dev, 2184 "Device is locked. Some attributes will be read-only.\n"); 2185 } else { 2186 /* Change permissions of zone sysfs attributes */ 2187 dme1737_chmod_group(dev, &dme1737_zone_chmod_group, 2188 S_IRUGO | S_IWUSR); 2189 2190 /* Change permissions of chip-dependent sysfs attributes */ 2191 if (data->has_features & HAS_TEMP_OFFSET) { 2192 dme1737_chmod_group(dev, &dme1737_temp_offset_group, 2193 S_IRUGO | S_IWUSR); 2194 } 2195 if (data->has_features & HAS_ZONE3) { 2196 dme1737_chmod_group(dev, &dme1737_zone3_chmod_group, 2197 S_IRUGO | S_IWUSR); 2198 } 2199 if (data->has_features & HAS_ZONE_HYST) { 2200 dme1737_chmod_group(dev, &dme1737_zone_hyst_group, 2201 S_IRUGO | S_IWUSR); 2202 } 2203 2204 /* Change permissions of PWM sysfs attributes */ 2205 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { 2206 if (data->has_features & HAS_PWM(ix)) { 2207 dme1737_chmod_group(dev, 2208 &dme1737_pwm_chmod_group[ix], 2209 S_IRUGO | S_IWUSR); 2210 if ((data->has_features & HAS_PWM_MIN) && 2211 ix < 3) { 2212 dme1737_chmod_file(dev, 2213 dme1737_auto_pwm_min_attr[ix], 2214 S_IRUGO | S_IWUSR); 2215 } 2216 } 2217 } 2218 2219 /* Change permissions of pwm[1-3] if in manual mode */ 2220 for (ix = 0; ix < 3; ix++) { 2221 if ((data->has_features & HAS_PWM(ix)) && 2222 (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) { 2223 dme1737_chmod_file(dev, 2224 dme1737_pwm_chmod_attr[ix], 2225 S_IRUGO | S_IWUSR); 2226 } 2227 } 2228 } 2229 2230 return 0; 2231 2232exit_remove: 2233 dme1737_remove_files(dev); 2234exit: 2235 return err; 2236} 2237 2238static int dme1737_init_device(struct device *dev) 2239{ 2240 struct dme1737_data *data = dev_get_drvdata(dev); 2241 struct i2c_client *client = data->client; 2242 int ix; 2243 u8 reg; 2244 2245 /* Point to the right nominal voltages array */ 2246 data->in_nominal = IN_NOMINAL(data->type); 2247 2248 data->config = dme1737_read(data, DME1737_REG_CONFIG); 2249 /* Inform if part is not monitoring/started */ 2250 if (!(data->config & 0x01)) { 2251 if (!force_start) { 2252 dev_err(dev, 2253 "Device is not monitoring. Use the force_start load parameter to override.\n"); 2254 return -EFAULT; 2255 } 2256 2257 /* Force monitoring */ 2258 data->config |= 0x01; 2259 dme1737_write(data, DME1737_REG_CONFIG, data->config); 2260 } 2261 /* Inform if part is not ready */ 2262 if (!(data->config & 0x04)) { 2263 dev_err(dev, "Device is not ready.\n"); 2264 return -EFAULT; 2265 } 2266 2267 /* 2268 * Determine which optional fan and pwm features are enabled (only 2269 * valid for I2C devices) 2270 */ 2271 if (client) { /* I2C chip */ 2272 data->config2 = dme1737_read(data, DME1737_REG_CONFIG2); 2273 /* Check if optional fan3 input is enabled */ 2274 if (data->config2 & 0x04) 2275 data->has_features |= HAS_FAN(2); 2276 2277 /* 2278 * Fan4 and pwm3 are only available if the client's I2C address 2279 * is the default 0x2e. Otherwise the I/Os associated with 2280 * these functions are used for addr enable/select. 2281 */ 2282 if (client->addr == 0x2e) 2283 data->has_features |= HAS_FAN(3) | HAS_PWM(2); 2284 2285 /* 2286 * Determine which of the optional fan[5-6] and pwm[5-6] 2287 * features are enabled. For this, we need to query the runtime 2288 * registers through the Super-IO LPC interface. Try both 2289 * config ports 0x2e and 0x4e. 2290 */ 2291 if (dme1737_i2c_get_features(0x2e, data) && 2292 dme1737_i2c_get_features(0x4e, data)) { 2293 dev_warn(dev, 2294 "Failed to query Super-IO for optional features.\n"); 2295 } 2296 } 2297 2298 /* Fan[1-2] and pwm[1-2] are present in all chips */ 2299 data->has_features |= HAS_FAN(0) | HAS_FAN(1) | HAS_PWM(0) | HAS_PWM(1); 2300 2301 /* Chip-dependent features */ 2302 switch (data->type) { 2303 case dme1737: 2304 data->has_features |= HAS_TEMP_OFFSET | HAS_VID | HAS_ZONE3 | 2305 HAS_ZONE_HYST | HAS_PWM_MIN; 2306 break; 2307 case sch311x: 2308 data->has_features |= HAS_TEMP_OFFSET | HAS_ZONE3 | 2309 HAS_ZONE_HYST | HAS_PWM_MIN | HAS_FAN(2) | HAS_PWM(2); 2310 break; 2311 case sch5027: 2312 data->has_features |= HAS_ZONE3; 2313 break; 2314 case sch5127: 2315 data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7; 2316 break; 2317 default: 2318 break; 2319 } 2320 2321 dev_info(dev, 2322 "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n", 2323 (data->has_features & HAS_PWM(2)) ? "yes" : "no", 2324 (data->has_features & HAS_PWM(4)) ? "yes" : "no", 2325 (data->has_features & HAS_PWM(5)) ? "yes" : "no", 2326 (data->has_features & HAS_FAN(2)) ? "yes" : "no", 2327 (data->has_features & HAS_FAN(3)) ? "yes" : "no", 2328 (data->has_features & HAS_FAN(4)) ? "yes" : "no", 2329 (data->has_features & HAS_FAN(5)) ? "yes" : "no"); 2330 2331 reg = dme1737_read(data, DME1737_REG_TACH_PWM); 2332 /* Inform if fan-to-pwm mapping differs from the default */ 2333 if (client && reg != 0xa4) { /* I2C chip */ 2334 dev_warn(dev, 2335 "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, fan4->pwm%d. %s\n", 2336 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1, 2337 ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1, 2338 DO_REPORT); 2339 } else if (!client && reg != 0x24) { /* ISA chip */ 2340 dev_warn(dev, 2341 "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. %s\n", 2342 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1, 2343 ((reg >> 4) & 0x03) + 1, DO_REPORT); 2344 } 2345 2346 /* 2347 * Switch pwm[1-3] to manual mode if they are currently disabled and 2348 * set the duty-cycles to 0% (which is identical to the PWMs being 2349 * disabled). 2350 */ 2351 if (!(data->config & 0x02)) { 2352 for (ix = 0; ix < 3; ix++) { 2353 data->pwm_config[ix] = dme1737_read(data, 2354 DME1737_REG_PWM_CONFIG(ix)); 2355 if ((data->has_features & HAS_PWM(ix)) && 2356 (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) { 2357 dev_info(dev, 2358 "Switching pwm%d to manual mode.\n", 2359 ix + 1); 2360 data->pwm_config[ix] = PWM_EN_TO_REG(1, 2361 data->pwm_config[ix]); 2362 dme1737_write(data, DME1737_REG_PWM(ix), 0); 2363 dme1737_write(data, 2364 DME1737_REG_PWM_CONFIG(ix), 2365 data->pwm_config[ix]); 2366 } 2367 } 2368 } 2369 2370 /* Initialize the default PWM auto channels zone (acz) assignments */ 2371 data->pwm_acz[0] = 1; /* pwm1 -> zone1 */ 2372 data->pwm_acz[1] = 2; /* pwm2 -> zone2 */ 2373 data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ 2374 2375 /* Set VRM */ 2376 if (data->has_features & HAS_VID) 2377 data->vrm = vid_which_vrm(); 2378 2379 return 0; 2380} 2381 2382/* --------------------------------------------------------------------- 2383 * I2C device detection and registration 2384 * --------------------------------------------------------------------- */ 2385 2386static struct i2c_driver dme1737_i2c_driver; 2387 2388static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) 2389{ 2390 int err = 0, reg; 2391 u16 addr; 2392 2393 dme1737_sio_enter(sio_cip); 2394 2395 /* 2396 * Check device ID 2397 * We currently know about two kinds of DME1737 and SCH5027. 2398 */ 2399 reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); 2400 if (!(reg == DME1737_ID_1 || reg == DME1737_ID_2 || 2401 reg == SCH5027_ID)) { 2402 err = -ENODEV; 2403 goto exit; 2404 } 2405 2406 /* Select logical device A (runtime registers) */ 2407 dme1737_sio_outb(sio_cip, 0x07, 0x0a); 2408 2409 /* Get the base address of the runtime registers */ 2410 addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) | 2411 dme1737_sio_inb(sio_cip, 0x61); 2412 if (!addr) { 2413 err = -ENODEV; 2414 goto exit; 2415 } 2416 2417 /* 2418 * Read the runtime registers to determine which optional features 2419 * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set 2420 * to '10' if the respective feature is enabled. 2421 */ 2422 if ((inb(addr + 0x43) & 0x0c) == 0x08) /* fan6 */ 2423 data->has_features |= HAS_FAN(5); 2424 if ((inb(addr + 0x44) & 0x0c) == 0x08) /* pwm6 */ 2425 data->has_features |= HAS_PWM(5); 2426 if ((inb(addr + 0x45) & 0x0c) == 0x08) /* fan5 */ 2427 data->has_features |= HAS_FAN(4); 2428 if ((inb(addr + 0x46) & 0x0c) == 0x08) /* pwm5 */ 2429 data->has_features |= HAS_PWM(4); 2430 2431exit: 2432 dme1737_sio_exit(sio_cip); 2433 2434 return err; 2435} 2436 2437/* Return 0 if detection is successful, -ENODEV otherwise */ 2438static int dme1737_i2c_detect(struct i2c_client *client, 2439 struct i2c_board_info *info) 2440{ 2441 struct i2c_adapter *adapter = client->adapter; 2442 struct device *dev = &adapter->dev; 2443 u8 company, verstep = 0; 2444 const char *name; 2445 2446 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 2447 return -ENODEV; 2448 2449 company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY); 2450 verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP); 2451 2452 if (company == DME1737_COMPANY_SMSC && 2453 verstep == SCH5027_VERSTEP) { 2454 name = "sch5027"; 2455 } else if (company == DME1737_COMPANY_SMSC && 2456 (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { 2457 name = "dme1737"; 2458 } else { 2459 return -ENODEV; 2460 } 2461 2462 dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n", 2463 verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737", 2464 client->addr, verstep); 2465 strlcpy(info->type, name, I2C_NAME_SIZE); 2466 2467 return 0; 2468} 2469 2470static int dme1737_i2c_probe(struct i2c_client *client, 2471 const struct i2c_device_id *id) 2472{ 2473 struct dme1737_data *data; 2474 struct device *dev = &client->dev; 2475 int err; 2476 2477 data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL); 2478 if (!data) 2479 return -ENOMEM; 2480 2481 i2c_set_clientdata(client, data); 2482 data->type = id->driver_data; 2483 data->client = client; 2484 data->name = client->name; 2485 mutex_init(&data->update_lock); 2486 2487 /* Initialize the DME1737 chip */ 2488 err = dme1737_init_device(dev); 2489 if (err) { 2490 dev_err(dev, "Failed to initialize device.\n"); 2491 return err; 2492 } 2493 2494 /* Create sysfs files */ 2495 err = dme1737_create_files(dev); 2496 if (err) { 2497 dev_err(dev, "Failed to create sysfs files.\n"); 2498 return err; 2499 } 2500 2501 /* Register device */ 2502 data->hwmon_dev = hwmon_device_register(dev); 2503 if (IS_ERR(data->hwmon_dev)) { 2504 dev_err(dev, "Failed to register device.\n"); 2505 err = PTR_ERR(data->hwmon_dev); 2506 goto exit_remove; 2507 } 2508 2509 return 0; 2510 2511exit_remove: 2512 dme1737_remove_files(dev); 2513 return err; 2514} 2515 2516static int dme1737_i2c_remove(struct i2c_client *client) 2517{ 2518 struct dme1737_data *data = i2c_get_clientdata(client); 2519 2520 hwmon_device_unregister(data->hwmon_dev); 2521 dme1737_remove_files(&client->dev); 2522 2523 return 0; 2524} 2525 2526static const struct i2c_device_id dme1737_id[] = { 2527 { "dme1737", dme1737 }, 2528 { "sch5027", sch5027 }, 2529 { } 2530}; 2531MODULE_DEVICE_TABLE(i2c, dme1737_id); 2532 2533static struct i2c_driver dme1737_i2c_driver = { 2534 .class = I2C_CLASS_HWMON, 2535 .driver = { 2536 .name = "dme1737", 2537 }, 2538 .probe = dme1737_i2c_probe, 2539 .remove = dme1737_i2c_remove, 2540 .id_table = dme1737_id, 2541 .detect = dme1737_i2c_detect, 2542 .address_list = normal_i2c, 2543}; 2544 2545/* --------------------------------------------------------------------- 2546 * ISA device detection and registration 2547 * --------------------------------------------------------------------- */ 2548 2549static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr) 2550{ 2551 int err = 0, reg; 2552 unsigned short base_addr; 2553 2554 dme1737_sio_enter(sio_cip); 2555 2556 /* 2557 * Check device ID 2558 * We currently know about SCH3112, SCH3114, SCH3116, and SCH5127 2559 */ 2560 reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); 2561 if (!(reg == SCH3112_ID || reg == SCH3114_ID || reg == SCH3116_ID || 2562 reg == SCH5127_ID)) { 2563 err = -ENODEV; 2564 goto exit; 2565 } 2566 2567 /* Select logical device A (runtime registers) */ 2568 dme1737_sio_outb(sio_cip, 0x07, 0x0a); 2569 2570 /* Get the base address of the runtime registers */ 2571 base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) | 2572 dme1737_sio_inb(sio_cip, 0x61); 2573 if (!base_addr) { 2574 pr_err("Base address not set\n"); 2575 err = -ENODEV; 2576 goto exit; 2577 } 2578 2579 /* 2580 * Access to the hwmon registers is through an index/data register 2581 * pair located at offset 0x70/0x71. 2582 */ 2583 *addr = base_addr + 0x70; 2584 2585exit: 2586 dme1737_sio_exit(sio_cip); 2587 return err; 2588} 2589 2590static int __init dme1737_isa_device_add(unsigned short addr) 2591{ 2592 struct resource res = { 2593 .start = addr, 2594 .end = addr + DME1737_EXTENT - 1, 2595 .name = "dme1737", 2596 .flags = IORESOURCE_IO, 2597 }; 2598 int err; 2599 2600 err = acpi_check_resource_conflict(&res); 2601 if (err) 2602 goto exit; 2603 2604 pdev = platform_device_alloc("dme1737", addr); 2605 if (!pdev) { 2606 pr_err("Failed to allocate device\n"); 2607 err = -ENOMEM; 2608 goto exit; 2609 } 2610 2611 err = platform_device_add_resources(pdev, &res, 1); 2612 if (err) { 2613 pr_err("Failed to add device resource (err = %d)\n", err); 2614 goto exit_device_put; 2615 } 2616 2617 err = platform_device_add(pdev); 2618 if (err) { 2619 pr_err("Failed to add device (err = %d)\n", err); 2620 goto exit_device_put; 2621 } 2622 2623 return 0; 2624 2625exit_device_put: 2626 platform_device_put(pdev); 2627 pdev = NULL; 2628exit: 2629 return err; 2630} 2631 2632static int dme1737_isa_probe(struct platform_device *pdev) 2633{ 2634 u8 company, device; 2635 struct resource *res; 2636 struct dme1737_data *data; 2637 struct device *dev = &pdev->dev; 2638 int err; 2639 2640 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 2641 if (!devm_request_region(dev, res->start, DME1737_EXTENT, "dme1737")) { 2642 dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", 2643 (unsigned short)res->start, 2644 (unsigned short)res->start + DME1737_EXTENT - 1); 2645 return -EBUSY; 2646 } 2647 2648 data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL); 2649 if (!data) 2650 return -ENOMEM; 2651 2652 data->addr = res->start; 2653 platform_set_drvdata(pdev, data); 2654 2655 /* Skip chip detection if module is loaded with force_id parameter */ 2656 switch (force_id) { 2657 case SCH3112_ID: 2658 case SCH3114_ID: 2659 case SCH3116_ID: 2660 data->type = sch311x; 2661 break; 2662 case SCH5127_ID: 2663 data->type = sch5127; 2664 break; 2665 default: 2666 company = dme1737_read(data, DME1737_REG_COMPANY); 2667 device = dme1737_read(data, DME1737_REG_DEVICE); 2668 2669 if ((company == DME1737_COMPANY_SMSC) && 2670 (device == SCH311X_DEVICE)) { 2671 data->type = sch311x; 2672 } else if ((company == DME1737_COMPANY_SMSC) && 2673 (device == SCH5127_DEVICE)) { 2674 data->type = sch5127; 2675 } else { 2676 return -ENODEV; 2677 } 2678 } 2679 2680 if (data->type == sch5127) 2681 data->name = "sch5127"; 2682 else 2683 data->name = "sch311x"; 2684 2685 /* Initialize the mutex */ 2686 mutex_init(&data->update_lock); 2687 2688 dev_info(dev, "Found a %s chip at 0x%04x\n", 2689 data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr); 2690 2691 /* Initialize the chip */ 2692 err = dme1737_init_device(dev); 2693 if (err) { 2694 dev_err(dev, "Failed to initialize device.\n"); 2695 return err; 2696 } 2697 2698 /* Create sysfs files */ 2699 err = dme1737_create_files(dev); 2700 if (err) { 2701 dev_err(dev, "Failed to create sysfs files.\n"); 2702 return err; 2703 } 2704 2705 /* Register device */ 2706 data->hwmon_dev = hwmon_device_register(dev); 2707 if (IS_ERR(data->hwmon_dev)) { 2708 dev_err(dev, "Failed to register device.\n"); 2709 err = PTR_ERR(data->hwmon_dev); 2710 goto exit_remove_files; 2711 } 2712 2713 return 0; 2714 2715exit_remove_files: 2716 dme1737_remove_files(dev); 2717 return err; 2718} 2719 2720static int dme1737_isa_remove(struct platform_device *pdev) 2721{ 2722 struct dme1737_data *data = platform_get_drvdata(pdev); 2723 2724 hwmon_device_unregister(data->hwmon_dev); 2725 dme1737_remove_files(&pdev->dev); 2726 2727 return 0; 2728} 2729 2730static struct platform_driver dme1737_isa_driver = { 2731 .driver = { 2732 .owner = THIS_MODULE, 2733 .name = "dme1737", 2734 }, 2735 .probe = dme1737_isa_probe, 2736 .remove = dme1737_isa_remove, 2737}; 2738 2739/* --------------------------------------------------------------------- 2740 * Module initialization and cleanup 2741 * --------------------------------------------------------------------- */ 2742 2743static int __init dme1737_init(void) 2744{ 2745 int err; 2746 unsigned short addr; 2747 2748 err = i2c_add_driver(&dme1737_i2c_driver); 2749 if (err) 2750 goto exit; 2751 2752 if (dme1737_isa_detect(0x2e, &addr) && 2753 dme1737_isa_detect(0x4e, &addr) && 2754 (!probe_all_addr || 2755 (dme1737_isa_detect(0x162e, &addr) && 2756 dme1737_isa_detect(0x164e, &addr)))) { 2757 /* Return 0 if we didn't find an ISA device */ 2758 return 0; 2759 } 2760 2761 err = platform_driver_register(&dme1737_isa_driver); 2762 if (err) 2763 goto exit_del_i2c_driver; 2764 2765 /* Sets global pdev as a side effect */ 2766 err = dme1737_isa_device_add(addr); 2767 if (err) 2768 goto exit_del_isa_driver; 2769 2770 return 0; 2771 2772exit_del_isa_driver: 2773 platform_driver_unregister(&dme1737_isa_driver); 2774exit_del_i2c_driver: 2775 i2c_del_driver(&dme1737_i2c_driver); 2776exit: 2777 return err; 2778} 2779 2780static void __exit dme1737_exit(void) 2781{ 2782 if (pdev) { 2783 platform_device_unregister(pdev); 2784 platform_driver_unregister(&dme1737_isa_driver); 2785 } 2786 2787 i2c_del_driver(&dme1737_i2c_driver); 2788} 2789 2790MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>"); 2791MODULE_DESCRIPTION("DME1737 sensors"); 2792MODULE_LICENSE("GPL"); 2793 2794module_init(dme1737_init); 2795module_exit(dme1737_exit); 2796