gayle.c revision dca3983059a4481e4ae97bbf0ac4b4c21429e1a5
1/* 2 * Amiga Gayle IDE Driver 3 * 4 * Created 9 Jul 1997 by Geert Uytterhoeven 5 * 6 * This file is subject to the terms and conditions of the GNU General Public 7 * License. See the file COPYING in the main directory of this archive for 8 * more details. 9 */ 10 11#include <linux/types.h> 12#include <linux/mm.h> 13#include <linux/interrupt.h> 14#include <linux/blkdev.h> 15#include <linux/ide.h> 16#include <linux/init.h> 17#include <linux/zorro.h> 18#include <linux/module.h> 19 20#include <asm/setup.h> 21#include <asm/amigahw.h> 22#include <asm/amigaints.h> 23#include <asm/amigayle.h> 24 25 26 /* 27 * Bases of the IDE interfaces 28 */ 29 30#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */ 31#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */ 32 33#define GAYLE_IDEREG_SIZE 0x2000 34 35 /* 36 * Offsets from one of the above bases 37 */ 38 39#define GAYLE_CONTROL 0x101a 40 41 /* 42 * These are at different offsets from the base 43 */ 44 45#define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */ 46#define GAYLE_IRQ_1200 0xda9000 /* interrupt */ 47 48 49 /* 50 * Offset of the secondary port for IDE doublers 51 * Note that GAYLE_CONTROL is NOT available then! 52 */ 53 54#define GAYLE_NEXT_PORT 0x1000 55 56#define GAYLE_NUM_HWIFS 2 57#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \ 58 GAYLE_NUM_HWIFS-1) 59#define GAYLE_HAS_CONTROL_REG (!ide_doubler) 60 61static int ide_doubler; 62module_param_named(doubler, ide_doubler, bool, 0); 63MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); 64 65 /* 66 * Check and acknowledge the interrupt status 67 */ 68 69static int gayle_ack_intr_a4000(ide_hwif_t *hwif) 70{ 71 unsigned char ch; 72 73 ch = z_readb(hwif->io_ports.irq_addr); 74 if (!(ch & GAYLE_IRQ_IDE)) 75 return 0; 76 return 1; 77} 78 79static int gayle_ack_intr_a1200(ide_hwif_t *hwif) 80{ 81 unsigned char ch; 82 83 ch = z_readb(hwif->io_ports.irq_addr); 84 if (!(ch & GAYLE_IRQ_IDE)) 85 return 0; 86 (void)z_readb(hwif->io_ports.status_addr); 87 z_writeb(0x7c, hwif->io_ports.irq_addr); 88 return 1; 89} 90 91static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, 92 unsigned long ctl, unsigned long irq_port, 93 ide_ack_intr_t *ack_intr) 94{ 95 int i; 96 97 memset(hw, 0, sizeof(*hw)); 98 99 hw->io_ports.data_addr = base; 100 101 for (i = 1; i < 8; i++) 102 hw->io_ports_array[i] = base + 2 + i * 4; 103 104 hw->io_ports.ctl_addr = ctl; 105 hw->io_ports.irq_addr = irq_port; 106 107 hw->irq = IRQ_AMIGA_PORTS; 108 hw->ack_intr = ack_intr; 109} 110 111static const struct ide_port_info gayle_port_info = { 112 .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE | 113 IDE_HFLAG_NO_DMA, 114 .irq_flags = IRQF_SHARED, 115 .chipset = ide_generic, 116}; 117 118 /* 119 * Probe for a Gayle IDE interface (and optionally for an IDE doubler) 120 */ 121 122static int __init gayle_init(void) 123{ 124 unsigned long phys_base, res_start, res_n; 125 unsigned long base, ctrlport, irqport; 126 ide_ack_intr_t *ack_intr; 127 int a4000, i, rc; 128 hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; 129 130 if (!MACH_IS_AMIGA) 131 return -ENODEV; 132 133 if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) 134 goto found; 135 136#ifdef CONFIG_ZORRO 137 if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE, 138 NULL)) 139 goto found; 140#endif 141 return -ENODEV; 142 143found: 144 printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", 145 a4000 ? 4000 : 1200, 146 ide_doubler ? ", IDE doubler" : ""); 147 148 if (a4000) { 149 phys_base = GAYLE_BASE_4000; 150 irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000); 151 ack_intr = gayle_ack_intr_a4000; 152 } else { 153 phys_base = GAYLE_BASE_1200; 154 irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200); 155 ack_intr = gayle_ack_intr_a1200; 156 } 157 158 res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1); 159 res_n = GAYLE_IDEREG_SIZE; 160 161 if (!request_mem_region(res_start, res_n, "IDE")) 162 return -EBUSY; 163 164 for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { 165 base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT); 166 ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0; 167 168 gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr); 169 170 hws[i] = &hw[i]; 171 } 172 173 rc = ide_host_add(&gayle_port_info, hws, i, NULL); 174 if (rc) 175 release_mem_region(res_start, res_n); 176 177 return rc; 178} 179 180module_init(gayle_init); 181 182MODULE_LICENSE("GPL"); 183