ide-disk.c revision 846c11abc7934a523a665a3b702358e6f2998e3e
1/*
2 *  linux/drivers/ide/ide-disk.c	Version 1.18	Mar 05, 2003
3 *
4 *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below)
5 *  Copyright (C) 1998-2002  Linux ATA Development
6 *				Andre Hedrick <andre@linux-ide.org>
7 *  Copyright (C) 2003	     Red Hat <alan@redhat.com>
8 */
9
10/*
11 *  Mostly written by Mark Lord <mlord@pobox.com>
12 *                and Gadi Oxman <gadio@netvision.net.il>
13 *                and Andre Hedrick <andre@linux-ide.org>
14 *
15 * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
16 *
17 * Version 1.00		move disk only code from ide.c to ide-disk.c
18 *			support optional byte-swapping of all data
19 * Version 1.01		fix previous byte-swapping code
20 * Version 1.02		remove ", LBA" from drive identification msgs
21 * Version 1.03		fix display of id->buf_size for big-endian
22 * Version 1.04		add /proc configurable settings and S.M.A.R.T support
23 * Version 1.05		add capacity support for ATA3 >= 8GB
24 * Version 1.06		get boot-up messages to show full cyl count
25 * Version 1.07		disable door-locking if it fails
26 * Version 1.08		fixed CHS/LBA translations for ATA4 > 8GB,
27 *			process of adding new ATA4 compliance.
28 *			fixed problems in allowing fdisk to see
29 *			the entire disk.
30 * Version 1.09		added increment of rq->sector in ide_multwrite
31 *			added UDMA 3/4 reporting
32 * Version 1.10		request queue changes, Ultra DMA 100
33 * Version 1.11		added 48-bit lba
34 * Version 1.12		adding taskfile io access method
35 * Version 1.13		added standby and flush-cache for notifier
36 * Version 1.14		added acoustic-wcache
37 * Version 1.15		convert all calls to ide_raw_taskfile
38 *				since args will return register content.
39 * Version 1.16		added suspend-resume-checkpower
40 * Version 1.17		do flush on standby, do flush on ATA < ATA6
41 *			fix wcache setup.
42 */
43
44#define IDEDISK_VERSION	"1.18"
45
46//#define DEBUG
47
48#include <linux/module.h>
49#include <linux/types.h>
50#include <linux/string.h>
51#include <linux/kernel.h>
52#include <linux/timer.h>
53#include <linux/mm.h>
54#include <linux/interrupt.h>
55#include <linux/major.h>
56#include <linux/errno.h>
57#include <linux/genhd.h>
58#include <linux/slab.h>
59#include <linux/delay.h>
60#include <linux/mutex.h>
61#include <linux/leds.h>
62
63#define _IDE_DISK
64
65#include <linux/ide.h>
66
67#include <asm/byteorder.h>
68#include <asm/irq.h>
69#include <asm/uaccess.h>
70#include <asm/io.h>
71#include <asm/div64.h>
72
73struct ide_disk_obj {
74	ide_drive_t	*drive;
75	ide_driver_t	*driver;
76	struct gendisk	*disk;
77	struct kref	kref;
78	unsigned int	openers;	/* protected by BKL for now */
79};
80
81static DEFINE_MUTEX(idedisk_ref_mutex);
82
83#define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)
84
85#define ide_disk_g(disk) \
86	container_of((disk)->private_data, struct ide_disk_obj, driver)
87
88static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
89{
90	struct ide_disk_obj *idkp = NULL;
91
92	mutex_lock(&idedisk_ref_mutex);
93	idkp = ide_disk_g(disk);
94	if (idkp)
95		kref_get(&idkp->kref);
96	mutex_unlock(&idedisk_ref_mutex);
97	return idkp;
98}
99
100static void ide_disk_release(struct kref *);
101
102static void ide_disk_put(struct ide_disk_obj *idkp)
103{
104	mutex_lock(&idedisk_ref_mutex);
105	kref_put(&idkp->kref, ide_disk_release);
106	mutex_unlock(&idedisk_ref_mutex);
107}
108
109/*
110 * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity"
111 * value for this drive (from its reported identification information).
112 *
113 * Returns:	1 if lba_capacity looks sensible
114 *		0 otherwise
115 *
116 * It is called only once for each drive.
117 */
118static int lba_capacity_is_ok (struct hd_driveid *id)
119{
120	unsigned long lba_sects, chs_sects, head, tail;
121
122	/* No non-LBA info .. so valid! */
123	if (id->cyls == 0)
124		return 1;
125
126	/*
127	 * The ATA spec tells large drives to return
128	 * C/H/S = 16383/16/63 independent of their size.
129	 * Some drives can be jumpered to use 15 heads instead of 16.
130	 * Some drives can be jumpered to use 4092 cyls instead of 16383.
131	 */
132	if ((id->cyls == 16383
133	     || (id->cyls == 4092 && id->cur_cyls == 16383)) &&
134	    id->sectors == 63 &&
135	    (id->heads == 15 || id->heads == 16) &&
136	    (id->lba_capacity >= 16383*63*id->heads))
137		return 1;
138
139	lba_sects   = id->lba_capacity;
140	chs_sects   = id->cyls * id->heads * id->sectors;
141
142	/* perform a rough sanity check on lba_sects:  within 10% is OK */
143	if ((lba_sects - chs_sects) < chs_sects/10)
144		return 1;
145
146	/* some drives have the word order reversed */
147	head = ((lba_sects >> 16) & 0xffff);
148	tail = (lba_sects & 0xffff);
149	lba_sects = (head | (tail << 16));
150	if ((lba_sects - chs_sects) < chs_sects/10) {
151		id->lba_capacity = lba_sects;
152		return 1;	/* lba_capacity is (now) good */
153	}
154
155	return 0;	/* lba_capacity value may be bad */
156}
157
158/*
159 * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
160 * using LBA if supported, or CHS otherwise, to address sectors.
161 */
162static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block)
163{
164	ide_hwif_t *hwif	= HWIF(drive);
165	unsigned int dma	= drive->using_dma;
166	u8 lba48		= (drive->addressing == 1) ? 1 : 0;
167	task_ioreg_t command	= WIN_NOP;
168	ata_nsector_t		nsectors;
169
170	nsectors.all		= (u16) rq->nr_sectors;
171
172	if (hwif->no_lba48_dma && lba48 && dma) {
173		if (block + rq->nr_sectors > 1ULL << 28)
174			dma = 0;
175		else
176			lba48 = 0;
177	}
178
179	if (!dma) {
180		ide_init_sg_cmd(drive, rq);
181		ide_map_sg(drive, rq);
182	}
183
184	if (IDE_CONTROL_REG)
185		hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
186
187	/* FIXME: SELECT_MASK(drive, 0) ? */
188
189	if (drive->select.b.lba) {
190		if (lba48) {
191			task_ioreg_t tasklets[10];
192
193			pr_debug("%s: LBA=0x%012llx\n", drive->name,
194					(unsigned long long)block);
195
196			tasklets[0] = 0;
197			tasklets[1] = 0;
198			tasklets[2] = nsectors.b.low;
199			tasklets[3] = nsectors.b.high;
200			tasklets[4] = (task_ioreg_t) block;
201			tasklets[5] = (task_ioreg_t) (block>>8);
202			tasklets[6] = (task_ioreg_t) (block>>16);
203			tasklets[7] = (task_ioreg_t) (block>>24);
204			if (sizeof(block) == 4) {
205				tasklets[8] = (task_ioreg_t) 0;
206				tasklets[9] = (task_ioreg_t) 0;
207			} else {
208				tasklets[8] = (task_ioreg_t)((u64)block >> 32);
209				tasklets[9] = (task_ioreg_t)((u64)block >> 40);
210			}
211#ifdef DEBUG
212			printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n",
213				drive->name, tasklets[3], tasklets[2],
214				tasklets[9], tasklets[8], tasklets[7],
215				tasklets[6], tasklets[5], tasklets[4]);
216#endif
217			hwif->OUTB(tasklets[1], IDE_FEATURE_REG);
218			hwif->OUTB(tasklets[3], IDE_NSECTOR_REG);
219			hwif->OUTB(tasklets[7], IDE_SECTOR_REG);
220			hwif->OUTB(tasklets[8], IDE_LCYL_REG);
221			hwif->OUTB(tasklets[9], IDE_HCYL_REG);
222
223			hwif->OUTB(tasklets[0], IDE_FEATURE_REG);
224			hwif->OUTB(tasklets[2], IDE_NSECTOR_REG);
225			hwif->OUTB(tasklets[4], IDE_SECTOR_REG);
226			hwif->OUTB(tasklets[5], IDE_LCYL_REG);
227			hwif->OUTB(tasklets[6], IDE_HCYL_REG);
228			hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG);
229		} else {
230			hwif->OUTB(0x00, IDE_FEATURE_REG);
231			hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
232			hwif->OUTB(block, IDE_SECTOR_REG);
233			hwif->OUTB(block>>=8, IDE_LCYL_REG);
234			hwif->OUTB(block>>=8, IDE_HCYL_REG);
235			hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG);
236		}
237	} else {
238		unsigned int sect,head,cyl,track;
239		track = (int)block / drive->sect;
240		sect  = (int)block % drive->sect + 1;
241		hwif->OUTB(sect, IDE_SECTOR_REG);
242		head  = track % drive->head;
243		cyl   = track / drive->head;
244
245		pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
246
247		hwif->OUTB(0x00, IDE_FEATURE_REG);
248		hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
249		hwif->OUTB(cyl, IDE_LCYL_REG);
250		hwif->OUTB(cyl>>8, IDE_HCYL_REG);
251		hwif->OUTB(head|drive->select.all,IDE_SELECT_REG);
252	}
253
254	if (dma) {
255		if (!hwif->dma_setup(drive)) {
256			if (rq_data_dir(rq)) {
257				command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA;
258				if (drive->vdma)
259					command = lba48 ? WIN_WRITE_EXT: WIN_WRITE;
260			} else {
261				command = lba48 ? WIN_READDMA_EXT : WIN_READDMA;
262				if (drive->vdma)
263					command = lba48 ? WIN_READ_EXT: WIN_READ;
264			}
265			hwif->dma_exec_cmd(drive, command);
266			hwif->dma_start(drive);
267			return ide_started;
268		}
269		/* fallback to PIO */
270		ide_init_sg_cmd(drive, rq);
271	}
272
273	if (rq_data_dir(rq) == READ) {
274
275		if (drive->mult_count) {
276			hwif->data_phase = TASKFILE_MULTI_IN;
277			command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD;
278		} else {
279			hwif->data_phase = TASKFILE_IN;
280			command = lba48 ? WIN_READ_EXT : WIN_READ;
281		}
282
283		ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL);
284		return ide_started;
285	} else {
286		if (drive->mult_count) {
287			hwif->data_phase = TASKFILE_MULTI_OUT;
288			command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
289		} else {
290			hwif->data_phase = TASKFILE_OUT;
291			command = lba48 ? WIN_WRITE_EXT : WIN_WRITE;
292		}
293
294		/* FIXME: ->OUTBSYNC ? */
295		hwif->OUTB(command, IDE_COMMAND_REG);
296
297		return pre_task_out_intr(drive, rq);
298	}
299}
300
301/*
302 * 268435455  == 137439 MB or 28bit limit
303 * 320173056  == 163929 MB or 48bit addressing
304 * 1073741822 == 549756 MB or 48bit addressing fake drive
305 */
306
307static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block)
308{
309	ide_hwif_t *hwif = HWIF(drive);
310
311	BUG_ON(drive->blocked);
312
313	if (!blk_fs_request(rq)) {
314		blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
315		ide_end_request(drive, 0, 0);
316		return ide_stopped;
317	}
318
319	ledtrig_ide_activity();
320
321	pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
322		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
323		 (unsigned long long)block, rq->nr_sectors,
324		 (unsigned long)rq->buffer);
325
326	if (hwif->rw_disk)
327		hwif->rw_disk(drive, rq);
328
329	return __ide_do_rw_disk(drive, rq, block);
330}
331
332/*
333 * Queries for true maximum capacity of the drive.
334 * Returns maximum LBA address (> 0) of the drive, 0 if failed.
335 */
336static unsigned long idedisk_read_native_max_address(ide_drive_t *drive)
337{
338	ide_task_t args;
339	unsigned long addr = 0;
340
341	/* Create IDE/ATA command request structure */
342	memset(&args, 0, sizeof(ide_task_t));
343	args.tfRegister[IDE_SELECT_OFFSET]	= 0x40;
344	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX;
345	args.command_type			= IDE_DRIVE_TASK_NO_DATA;
346	args.handler				= &task_no_data_intr;
347	/* submit command request */
348	ide_raw_taskfile(drive, &args, NULL);
349
350	/* if OK, compute maximum address value */
351	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
352		addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24)
353		     | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16)
354		     | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8)
355		     | ((args.tfRegister[IDE_SECTOR_OFFSET]       ));
356		addr++;	/* since the return value is (maxlba - 1), we add 1 */
357	}
358	return addr;
359}
360
361static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive)
362{
363	ide_task_t args;
364	unsigned long long addr = 0;
365
366	/* Create IDE/ATA command request structure */
367	memset(&args, 0, sizeof(ide_task_t));
368
369	args.tfRegister[IDE_SELECT_OFFSET]	= 0x40;
370	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX_EXT;
371	args.command_type			= IDE_DRIVE_TASK_NO_DATA;
372	args.handler				= &task_no_data_intr;
373        /* submit command request */
374        ide_raw_taskfile(drive, &args, NULL);
375
376	/* if OK, compute maximum address value */
377	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
378		u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) |
379			   (args.hobRegister[IDE_LCYL_OFFSET] <<  8) |
380			    args.hobRegister[IDE_SECTOR_OFFSET];
381		u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) |
382			   ((args.tfRegister[IDE_LCYL_OFFSET])<<8) |
383			    (args.tfRegister[IDE_SECTOR_OFFSET]);
384		addr = ((__u64)high << 24) | low;
385		addr++;	/* since the return value is (maxlba - 1), we add 1 */
386	}
387	return addr;
388}
389
390/*
391 * Sets maximum virtual LBA address of the drive.
392 * Returns new maximum virtual LBA address (> 0) or 0 on failure.
393 */
394static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req)
395{
396	ide_task_t args;
397	unsigned long addr_set = 0;
398
399	addr_req--;
400	/* Create IDE/ATA command request structure */
401	memset(&args, 0, sizeof(ide_task_t));
402	args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff);
403	args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>  8) & 0xff);
404	args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >> 16) & 0xff);
405	args.tfRegister[IDE_SELECT_OFFSET]	= ((addr_req >> 24) & 0x0f) | 0x40;
406	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX;
407	args.command_type			= IDE_DRIVE_TASK_NO_DATA;
408	args.handler				= &task_no_data_intr;
409	/* submit command request */
410	ide_raw_taskfile(drive, &args, NULL);
411	/* if OK, read new maximum address value */
412	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
413		addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24)
414			 | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16)
415			 | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8)
416			 | ((args.tfRegister[IDE_SECTOR_OFFSET]       ));
417		addr_set++;
418	}
419	return addr_set;
420}
421
422static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req)
423{
424	ide_task_t args;
425	unsigned long long addr_set = 0;
426
427	addr_req--;
428	/* Create IDE/ATA command request structure */
429	memset(&args, 0, sizeof(ide_task_t));
430	args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff);
431	args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>= 8) & 0xff);
432	args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >>= 8) & 0xff);
433	args.tfRegister[IDE_SELECT_OFFSET]      = 0x40;
434	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX_EXT;
435	args.hobRegister[IDE_SECTOR_OFFSET]	= (addr_req >>= 8) & 0xff;
436	args.hobRegister[IDE_LCYL_OFFSET]	= (addr_req >>= 8) & 0xff;
437	args.hobRegister[IDE_HCYL_OFFSET]	= (addr_req >>= 8) & 0xff;
438	args.hobRegister[IDE_SELECT_OFFSET]	= 0x40;
439	args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80);
440	args.command_type			= IDE_DRIVE_TASK_NO_DATA;
441	args.handler				= &task_no_data_intr;
442	/* submit command request */
443	ide_raw_taskfile(drive, &args, NULL);
444	/* if OK, compute maximum address value */
445	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) {
446		u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) |
447			   (args.hobRegister[IDE_LCYL_OFFSET] <<  8) |
448			    args.hobRegister[IDE_SECTOR_OFFSET];
449		u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) |
450			   ((args.tfRegister[IDE_LCYL_OFFSET])<<8) |
451			    (args.tfRegister[IDE_SECTOR_OFFSET]);
452		addr_set = ((__u64)high << 24) | low;
453		addr_set++;
454	}
455	return addr_set;
456}
457
458static unsigned long long sectors_to_MB(unsigned long long n)
459{
460	n <<= 9;		/* make it bytes */
461	do_div(n, 1000000);	/* make it MB */
462	return n;
463}
464
465/*
466 * Bits 10 of command_set_1 and cfs_enable_1 must be equal,
467 * so on non-buggy drives we need test only one.
468 * However, we should also check whether these fields are valid.
469 */
470static inline int idedisk_supports_hpa(const struct hd_driveid *id)
471{
472	return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
473}
474
475/*
476 * The same here.
477 */
478static inline int idedisk_supports_lba48(const struct hd_driveid *id)
479{
480	return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)
481	       && id->lba_capacity_2;
482}
483
484static void idedisk_check_hpa(ide_drive_t *drive)
485{
486	unsigned long long capacity, set_max;
487	int lba48 = idedisk_supports_lba48(drive->id);
488
489	capacity = drive->capacity64;
490	if (lba48)
491		set_max = idedisk_read_native_max_address_ext(drive);
492	else
493		set_max = idedisk_read_native_max_address(drive);
494
495	if (set_max <= capacity)
496		return;
497
498	printk(KERN_INFO "%s: Host Protected Area detected.\n"
499			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
500			 "\tnative  capacity is %llu sectors (%llu MB)\n",
501			 drive->name,
502			 capacity, sectors_to_MB(capacity),
503			 set_max, sectors_to_MB(set_max));
504
505	if (lba48)
506		set_max = idedisk_set_max_address_ext(drive, set_max);
507	else
508		set_max = idedisk_set_max_address(drive, set_max);
509	if (set_max) {
510		drive->capacity64 = set_max;
511		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
512				 drive->name);
513	}
514}
515
516/*
517 * Compute drive->capacity, the full capacity of the drive
518 * Called with drive->id != NULL.
519 *
520 * To compute capacity, this uses either of
521 *
522 *    1. CHS value set by user       (whatever user sets will be trusted)
523 *    2. LBA value from target drive (require new ATA feature)
524 *    3. LBA value from system BIOS  (new one is OK, old one may break)
525 *    4. CHS value from system BIOS  (traditional style)
526 *
527 * in above order (i.e., if value of higher priority is available,
528 * reset will be ignored).
529 */
530static void init_idedisk_capacity (ide_drive_t  *drive)
531{
532	struct hd_driveid *id = drive->id;
533	/*
534	 * If this drive supports the Host Protected Area feature set,
535	 * then we may need to change our opinion about the drive's capacity.
536	 */
537	int hpa = idedisk_supports_hpa(id);
538
539	if (idedisk_supports_lba48(id)) {
540		/* drive speaks 48-bit LBA */
541		drive->select.b.lba = 1;
542		drive->capacity64 = id->lba_capacity_2;
543		if (hpa)
544			idedisk_check_hpa(drive);
545	} else if ((id->capability & 2) && lba_capacity_is_ok(id)) {
546		/* drive speaks 28-bit LBA */
547		drive->select.b.lba = 1;
548		drive->capacity64 = id->lba_capacity;
549		if (hpa)
550			idedisk_check_hpa(drive);
551	} else {
552		/* drive speaks boring old 28-bit CHS */
553		drive->capacity64 = drive->cyl * drive->head * drive->sect;
554	}
555}
556
557static sector_t idedisk_capacity (ide_drive_t *drive)
558{
559	return drive->capacity64 - drive->sect0;
560}
561
562#ifdef CONFIG_PROC_FS
563
564static int smart_enable(ide_drive_t *drive)
565{
566	ide_task_t args;
567
568	memset(&args, 0, sizeof(ide_task_t));
569	args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_ENABLE;
570	args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS;
571	args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS;
572	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART;
573	args.command_type			= IDE_DRIVE_TASK_NO_DATA;
574	args.handler				= &task_no_data_intr;
575	return ide_raw_taskfile(drive, &args, NULL);
576}
577
578static int get_smart_values(ide_drive_t *drive, u8 *buf)
579{
580	ide_task_t args;
581
582	memset(&args, 0, sizeof(ide_task_t));
583	args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_VALUES;
584	args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01;
585	args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS;
586	args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS;
587	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART;
588	args.command_type			= IDE_DRIVE_TASK_IN;
589	args.data_phase				= TASKFILE_IN;
590	args.handler				= &task_in_intr;
591	(void) smart_enable(drive);
592	return ide_raw_taskfile(drive, &args, buf);
593}
594
595static int get_smart_thresholds(ide_drive_t *drive, u8 *buf)
596{
597	ide_task_t args;
598	memset(&args, 0, sizeof(ide_task_t));
599	args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_THRESHOLDS;
600	args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01;
601	args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS;
602	args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS;
603	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART;
604	args.command_type			= IDE_DRIVE_TASK_IN;
605	args.data_phase				= TASKFILE_IN;
606	args.handler				= &task_in_intr;
607	(void) smart_enable(drive);
608	return ide_raw_taskfile(drive, &args, buf);
609}
610
611static int proc_idedisk_read_cache
612	(char *page, char **start, off_t off, int count, int *eof, void *data)
613{
614	ide_drive_t	*drive = (ide_drive_t *) data;
615	char		*out = page;
616	int		len;
617
618	if (drive->id_read)
619		len = sprintf(out,"%i\n", drive->id->buf_size / 2);
620	else
621		len = sprintf(out,"(none)\n");
622	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
623}
624
625static int proc_idedisk_read_capacity
626	(char *page, char **start, off_t off, int count, int *eof, void *data)
627{
628	ide_drive_t*drive = (ide_drive_t *)data;
629	int len;
630
631	len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive));
632	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
633}
634
635static int proc_idedisk_read_smart_thresholds
636	(char *page, char **start, off_t off, int count, int *eof, void *data)
637{
638	ide_drive_t	*drive = (ide_drive_t *)data;
639	int		len = 0, i = 0;
640
641	if (!get_smart_thresholds(drive, page)) {
642		unsigned short *val = (unsigned short *) page;
643		char *out = ((char *)val) + (SECTOR_WORDS * 4);
644		page = out;
645		do {
646			out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
647			val += 1;
648		} while (i < (SECTOR_WORDS * 2));
649		len = out - page;
650	}
651	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
652}
653
654static int proc_idedisk_read_smart_values
655	(char *page, char **start, off_t off, int count, int *eof, void *data)
656{
657	ide_drive_t	*drive = (ide_drive_t *)data;
658	int		len = 0, i = 0;
659
660	if (!get_smart_values(drive, page)) {
661		unsigned short *val = (unsigned short *) page;
662		char *out = ((char *)val) + (SECTOR_WORDS * 4);
663		page = out;
664		do {
665			out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
666			val += 1;
667		} while (i < (SECTOR_WORDS * 2));
668		len = out - page;
669	}
670	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
671}
672
673static ide_proc_entry_t idedisk_proc[] = {
674	{ "cache",		S_IFREG|S_IRUGO,	proc_idedisk_read_cache,		NULL },
675	{ "capacity",		S_IFREG|S_IRUGO,	proc_idedisk_read_capacity,		NULL },
676	{ "geometry",		S_IFREG|S_IRUGO,	proc_ide_read_geometry,			NULL },
677	{ "smart_values",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_values,		NULL },
678	{ "smart_thresholds",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_thresholds,	NULL },
679	{ NULL, 0, NULL, NULL }
680};
681
682#else
683
684#define	idedisk_proc	NULL
685
686#endif	/* CONFIG_PROC_FS */
687
688static void idedisk_prepare_flush(request_queue_t *q, struct request *rq)
689{
690	ide_drive_t *drive = q->queuedata;
691
692	memset(rq->cmd, 0, sizeof(rq->cmd));
693
694	if (ide_id_has_flush_cache_ext(drive->id) &&
695	    (drive->capacity64 >= (1UL << 28)))
696		rq->cmd[0] = WIN_FLUSH_CACHE_EXT;
697	else
698		rq->cmd[0] = WIN_FLUSH_CACHE;
699
700
701	rq->cmd_type = REQ_TYPE_ATA_TASK;
702	rq->cmd_flags |= REQ_SOFTBARRIER;
703	rq->buffer = rq->cmd;
704}
705
706static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk,
707			       sector_t *error_sector)
708{
709	ide_drive_t *drive = q->queuedata;
710	struct request *rq;
711	int ret;
712
713	if (!drive->wcache)
714		return 0;
715
716	rq = blk_get_request(q, WRITE, __GFP_WAIT);
717
718	idedisk_prepare_flush(q, rq);
719
720	ret = blk_execute_rq(q, disk, rq, 0);
721
722	/*
723	 * if we failed and caller wants error offset, get it
724	 */
725	if (ret && error_sector)
726		*error_sector = ide_get_error_location(drive, rq->cmd);
727
728	blk_put_request(rq);
729	return ret;
730}
731
732/*
733 * This is tightly woven into the driver->do_special can not touch.
734 * DON'T do it again until a total personality rewrite is committed.
735 */
736static int set_multcount(ide_drive_t *drive, int arg)
737{
738	struct request rq;
739
740	if (drive->special.b.set_multmode)
741		return -EBUSY;
742	ide_init_drive_cmd (&rq);
743	rq.cmd_type = REQ_TYPE_ATA_CMD;
744	drive->mult_req = arg;
745	drive->special.b.set_multmode = 1;
746	(void) ide_do_drive_cmd (drive, &rq, ide_wait);
747	return (drive->mult_count == arg) ? 0 : -EIO;
748}
749
750static int set_nowerr(ide_drive_t *drive, int arg)
751{
752	if (ide_spin_wait_hwgroup(drive))
753		return -EBUSY;
754	drive->nowerr = arg;
755	drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
756	spin_unlock_irq(&ide_lock);
757	return 0;
758}
759
760static void update_ordered(ide_drive_t *drive)
761{
762	struct hd_driveid *id = drive->id;
763	unsigned ordered = QUEUE_ORDERED_NONE;
764	prepare_flush_fn *prep_fn = NULL;
765	issue_flush_fn *issue_fn = NULL;
766
767	if (drive->wcache) {
768		unsigned long long capacity;
769		int barrier;
770		/*
771		 * We must avoid issuing commands a drive does not
772		 * understand or we may crash it. We check flush cache
773		 * is supported. We also check we have the LBA48 flush
774		 * cache if the drive capacity is too large. By this
775		 * time we have trimmed the drive capacity if LBA48 is
776		 * not available so we don't need to recheck that.
777		 */
778		capacity = idedisk_capacity(drive);
779		barrier = ide_id_has_flush_cache(id) && !drive->noflush &&
780			(drive->addressing == 0 || capacity <= (1ULL << 28) ||
781			 ide_id_has_flush_cache_ext(id));
782
783		printk(KERN_INFO "%s: cache flushes %ssupported\n",
784		       drive->name, barrier ? "" : "not ");
785
786		if (barrier) {
787			ordered = QUEUE_ORDERED_DRAIN_FLUSH;
788			prep_fn = idedisk_prepare_flush;
789			issue_fn = idedisk_issue_flush;
790		}
791	} else
792		ordered = QUEUE_ORDERED_DRAIN;
793
794	blk_queue_ordered(drive->queue, ordered, prep_fn);
795	blk_queue_issue_flush_fn(drive->queue, issue_fn);
796}
797
798static int write_cache(ide_drive_t *drive, int arg)
799{
800	ide_task_t args;
801	int err = 1;
802
803	if (ide_id_has_flush_cache(drive->id)) {
804		memset(&args, 0, sizeof(ide_task_t));
805		args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ?
806			SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
807		args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES;
808		args.command_type		= IDE_DRIVE_TASK_NO_DATA;
809		args.handler			= &task_no_data_intr;
810		err = ide_raw_taskfile(drive, &args, NULL);
811		if (err == 0)
812			drive->wcache = arg;
813	}
814
815	update_ordered(drive);
816
817	return err;
818}
819
820static int do_idedisk_flushcache (ide_drive_t *drive)
821{
822	ide_task_t args;
823
824	memset(&args, 0, sizeof(ide_task_t));
825	if (ide_id_has_flush_cache_ext(drive->id))
826		args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE_EXT;
827	else
828		args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE;
829	args.command_type			= IDE_DRIVE_TASK_NO_DATA;
830	args.handler				= &task_no_data_intr;
831	return ide_raw_taskfile(drive, &args, NULL);
832}
833
834static int set_acoustic (ide_drive_t *drive, int arg)
835{
836	ide_task_t args;
837
838	memset(&args, 0, sizeof(ide_task_t));
839	args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? SETFEATURES_EN_AAM :
840							  SETFEATURES_DIS_AAM;
841	args.tfRegister[IDE_NSECTOR_OFFSET]	= arg;
842	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES;
843	args.command_type = IDE_DRIVE_TASK_NO_DATA;
844	args.handler	  = &task_no_data_intr;
845	ide_raw_taskfile(drive, &args, NULL);
846	drive->acoustic = arg;
847	return 0;
848}
849
850/*
851 * drive->addressing:
852 *	0: 28-bit
853 *	1: 48-bit
854 *	2: 48-bit capable doing 28-bit
855 */
856static int set_lba_addressing(ide_drive_t *drive, int arg)
857{
858	drive->addressing =  0;
859
860	if (HWIF(drive)->no_lba48)
861		return 0;
862
863	if (!idedisk_supports_lba48(drive->id))
864                return -EIO;
865	drive->addressing = arg;
866	return 0;
867}
868
869static void idedisk_add_settings(ide_drive_t *drive)
870{
871	struct hd_driveid *id = drive->id;
872
873	ide_add_setting(drive,	"bios_cyl",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->bios_cyl,		NULL);
874	ide_add_setting(drive,	"bios_head",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	255,				1,	1,	&drive->bios_head,		NULL);
875	ide_add_setting(drive,	"bios_sect",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	63,				1,	1,	&drive->bios_sect,		NULL);
876	ide_add_setting(drive,	"address",		SETTING_RW,					HDIO_GET_ADDRESS,	HDIO_SET_ADDRESS,	TYPE_INTA,	0,	2,				1,	1,	&drive->addressing,	set_lba_addressing);
877	ide_add_setting(drive,	"bswap",		SETTING_READ,					-1,			-1,			TYPE_BYTE,	0,	1,				1,	1,	&drive->bswap,			NULL);
878	ide_add_setting(drive,	"multcount",		id ? SETTING_RW : SETTING_READ,			HDIO_GET_MULTCOUNT,	HDIO_SET_MULTCOUNT,	TYPE_BYTE,	0,	id ? id->max_multsect : 0,	1,	1,	&drive->mult_count,		set_multcount);
879	ide_add_setting(drive,	"nowerr",		SETTING_RW,					HDIO_GET_NOWERR,	HDIO_SET_NOWERR,	TYPE_BYTE,	0,	1,				1,	1,	&drive->nowerr,			set_nowerr);
880	ide_add_setting(drive,	"lun",			SETTING_RW,					-1,			-1,			TYPE_INT,	0,	7,				1,	1,	&drive->lun,			NULL);
881	ide_add_setting(drive,	"wcache",		SETTING_RW,					HDIO_GET_WCACHE,	HDIO_SET_WCACHE,	TYPE_BYTE,	0,	1,				1,	1,	&drive->wcache,			write_cache);
882	ide_add_setting(drive,	"acoustic",		SETTING_RW,					HDIO_GET_ACOUSTIC,	HDIO_SET_ACOUSTIC,	TYPE_BYTE,	0,	254,				1,	1,	&drive->acoustic,		set_acoustic);
883 	ide_add_setting(drive,	"failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->failures,		NULL);
884 	ide_add_setting(drive,	"max_failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->max_failures,		NULL);
885}
886
887static void idedisk_setup (ide_drive_t *drive)
888{
889	struct hd_driveid *id = drive->id;
890	unsigned long long capacity;
891
892	idedisk_add_settings(drive);
893
894	if (drive->id_read == 0)
895		return;
896
897	if (drive->removable) {
898		/*
899		 * Removable disks (eg. SYQUEST); ignore 'WD' drives
900		 */
901		if (id->model[0] != 'W' || id->model[1] != 'D') {
902			drive->doorlocking = 1;
903		}
904	}
905
906	(void)set_lba_addressing(drive, 1);
907
908	if (drive->addressing == 1) {
909		ide_hwif_t *hwif = HWIF(drive);
910		int max_s = 2048;
911
912		if (max_s > hwif->rqsize)
913			max_s = hwif->rqsize;
914
915		blk_queue_max_sectors(drive->queue, max_s);
916	}
917
918	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2);
919
920	/* calculate drive capacity, and select LBA if possible */
921	init_idedisk_capacity (drive);
922
923	/* limit drive capacity to 137GB if LBA48 cannot be used */
924	if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) {
925		printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
926		       "%llu sectors (%llu MB)\n",
927		       drive->name, (unsigned long long)drive->capacity64,
928		       sectors_to_MB(drive->capacity64));
929		drive->capacity64 = 1ULL << 28;
930	}
931
932	if (drive->hwif->no_lba48_dma && drive->addressing) {
933		if (drive->capacity64 > 1ULL << 28) {
934			printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will"
935					 " be used for accessing sectors > %u\n",
936					 drive->name, 1 << 28);
937		} else
938			drive->addressing = 0;
939	}
940
941	/*
942	 * if possible, give fdisk access to more of the drive,
943	 * by correcting bios_cyls:
944	 */
945	capacity = idedisk_capacity (drive);
946	if (!drive->forced_geom) {
947
948		if (idedisk_supports_lba48(drive->id)) {
949			/* compatibility */
950			drive->bios_sect = 63;
951			drive->bios_head = 255;
952		}
953
954		if (drive->bios_sect && drive->bios_head) {
955			unsigned int cap0 = capacity; /* truncate to 32 bits */
956			unsigned int cylsz, cyl;
957
958			if (cap0 != capacity)
959				drive->bios_cyl = 65535;
960			else {
961				cylsz = drive->bios_sect * drive->bios_head;
962				cyl = cap0 / cylsz;
963				if (cyl > 65535)
964					cyl = 65535;
965				if (cyl > drive->bios_cyl)
966					drive->bios_cyl = cyl;
967			}
968		}
969	}
970	printk(KERN_INFO "%s: %llu sectors (%llu MB)",
971			 drive->name, capacity, sectors_to_MB(capacity));
972
973	/* Only print cache size when it was specified */
974	if (id->buf_size)
975		printk (" w/%dKiB Cache", id->buf_size/2);
976
977	printk(", CHS=%d/%d/%d",
978	       drive->bios_cyl, drive->bios_head, drive->bios_sect);
979	if (drive->using_dma)
980		ide_dma_verbose(drive);
981	printk("\n");
982
983	/* write cache enabled? */
984	if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
985		drive->wcache = 1;
986
987	write_cache(drive, 1);
988}
989
990static void ide_cacheflush_p(ide_drive_t *drive)
991{
992	if (!drive->wcache || !ide_id_has_flush_cache(drive->id))
993		return;
994
995	if (do_idedisk_flushcache(drive))
996		printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
997}
998
999static void ide_disk_remove(ide_drive_t *drive)
1000{
1001	struct ide_disk_obj *idkp = drive->driver_data;
1002	struct gendisk *g = idkp->disk;
1003
1004	ide_unregister_subdriver(drive, idkp->driver);
1005
1006	del_gendisk(g);
1007
1008	ide_cacheflush_p(drive);
1009
1010	ide_disk_put(idkp);
1011}
1012
1013static void ide_disk_release(struct kref *kref)
1014{
1015	struct ide_disk_obj *idkp = to_ide_disk(kref);
1016	ide_drive_t *drive = idkp->drive;
1017	struct gendisk *g = idkp->disk;
1018
1019	drive->driver_data = NULL;
1020	g->private_data = NULL;
1021	put_disk(g);
1022	kfree(idkp);
1023}
1024
1025static int ide_disk_probe(ide_drive_t *drive);
1026
1027static void ide_device_shutdown(ide_drive_t *drive)
1028{
1029#ifdef	CONFIG_ALPHA
1030	/* On Alpha, halt(8) doesn't actually turn the machine off,
1031	   it puts you into the sort of firmware monitor. Typically,
1032	   it's used to boot another kernel image, so it's not much
1033	   different from reboot(8). Therefore, we don't need to
1034	   spin down the disk in this case, especially since Alpha
1035	   firmware doesn't handle disks in standby mode properly.
1036	   On the other hand, it's reasonably safe to turn the power
1037	   off when the shutdown process reaches the firmware prompt,
1038	   as the firmware initialization takes rather long time -
1039	   at least 10 seconds, which should be sufficient for
1040	   the disk to expire its write cache. */
1041	if (system_state != SYSTEM_POWER_OFF) {
1042#else
1043	if (system_state == SYSTEM_RESTART) {
1044#endif
1045		ide_cacheflush_p(drive);
1046		return;
1047	}
1048
1049	printk("Shutdown: %s\n", drive->name);
1050	drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
1051}
1052
1053static ide_driver_t idedisk_driver = {
1054	.gen_driver = {
1055		.owner		= THIS_MODULE,
1056		.name		= "ide-disk",
1057		.bus		= &ide_bus_type,
1058	},
1059	.probe			= ide_disk_probe,
1060	.remove			= ide_disk_remove,
1061	.shutdown		= ide_device_shutdown,
1062	.version		= IDEDISK_VERSION,
1063	.media			= ide_disk,
1064	.supports_dsc_overlap	= 0,
1065	.do_request		= ide_do_rw_disk,
1066	.end_request		= ide_end_request,
1067	.error			= __ide_error,
1068	.abort			= __ide_abort,
1069	.proc			= idedisk_proc,
1070};
1071
1072static int idedisk_open(struct inode *inode, struct file *filp)
1073{
1074	struct gendisk *disk = inode->i_bdev->bd_disk;
1075	struct ide_disk_obj *idkp;
1076	ide_drive_t *drive;
1077
1078	if (!(idkp = ide_disk_get(disk)))
1079		return -ENXIO;
1080
1081	drive = idkp->drive;
1082
1083	idkp->openers++;
1084
1085	if (drive->removable && idkp->openers == 1) {
1086		ide_task_t args;
1087		memset(&args, 0, sizeof(ide_task_t));
1088		args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK;
1089		args.command_type = IDE_DRIVE_TASK_NO_DATA;
1090		args.handler	  = &task_no_data_intr;
1091		check_disk_change(inode->i_bdev);
1092		/*
1093		 * Ignore the return code from door_lock,
1094		 * since the open() has already succeeded,
1095		 * and the door_lock is irrelevant at this point.
1096		 */
1097		if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
1098			drive->doorlocking = 0;
1099	}
1100	return 0;
1101}
1102
1103static int idedisk_release(struct inode *inode, struct file *filp)
1104{
1105	struct gendisk *disk = inode->i_bdev->bd_disk;
1106	struct ide_disk_obj *idkp = ide_disk_g(disk);
1107	ide_drive_t *drive = idkp->drive;
1108
1109	if (idkp->openers == 1)
1110		ide_cacheflush_p(drive);
1111
1112	if (drive->removable && idkp->openers == 1) {
1113		ide_task_t args;
1114		memset(&args, 0, sizeof(ide_task_t));
1115		args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK;
1116		args.command_type = IDE_DRIVE_TASK_NO_DATA;
1117		args.handler	  = &task_no_data_intr;
1118		if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
1119			drive->doorlocking = 0;
1120	}
1121
1122	idkp->openers--;
1123
1124	ide_disk_put(idkp);
1125
1126	return 0;
1127}
1128
1129static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1130{
1131	struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
1132	ide_drive_t *drive = idkp->drive;
1133
1134	geo->heads = drive->bios_head;
1135	geo->sectors = drive->bios_sect;
1136	geo->cylinders = (u16)drive->bios_cyl; /* truncate */
1137	return 0;
1138}
1139
1140static int idedisk_ioctl(struct inode *inode, struct file *file,
1141			unsigned int cmd, unsigned long arg)
1142{
1143	struct block_device *bdev = inode->i_bdev;
1144	struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
1145	return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg);
1146}
1147
1148static int idedisk_media_changed(struct gendisk *disk)
1149{
1150	struct ide_disk_obj *idkp = ide_disk_g(disk);
1151	ide_drive_t *drive = idkp->drive;
1152
1153	/* do not scan partitions twice if this is a removable device */
1154	if (drive->attach) {
1155		drive->attach = 0;
1156		return 0;
1157	}
1158	/* if removable, always assume it was changed */
1159	return drive->removable;
1160}
1161
1162static int idedisk_revalidate_disk(struct gendisk *disk)
1163{
1164	struct ide_disk_obj *idkp = ide_disk_g(disk);
1165	set_capacity(disk, idedisk_capacity(idkp->drive));
1166	return 0;
1167}
1168
1169static struct block_device_operations idedisk_ops = {
1170	.owner		= THIS_MODULE,
1171	.open		= idedisk_open,
1172	.release	= idedisk_release,
1173	.ioctl		= idedisk_ioctl,
1174	.getgeo		= idedisk_getgeo,
1175	.media_changed	= idedisk_media_changed,
1176	.revalidate_disk= idedisk_revalidate_disk
1177};
1178
1179MODULE_DESCRIPTION("ATA DISK Driver");
1180
1181static int ide_disk_probe(ide_drive_t *drive)
1182{
1183	struct ide_disk_obj *idkp;
1184	struct gendisk *g;
1185
1186	/* strstr("foo", "") is non-NULL */
1187	if (!strstr("ide-disk", drive->driver_req))
1188		goto failed;
1189	if (!drive->present)
1190		goto failed;
1191	if (drive->media != ide_disk)
1192		goto failed;
1193
1194	idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
1195	if (!idkp)
1196		goto failed;
1197
1198	g = alloc_disk_node(1 << PARTN_BITS,
1199			hwif_to_node(drive->hwif));
1200	if (!g)
1201		goto out_free_idkp;
1202
1203	ide_init_disk(g, drive);
1204
1205	ide_register_subdriver(drive, &idedisk_driver);
1206
1207	kref_init(&idkp->kref);
1208
1209	idkp->drive = drive;
1210	idkp->driver = &idedisk_driver;
1211	idkp->disk = g;
1212
1213	g->private_data = &idkp->driver;
1214
1215	drive->driver_data = idkp;
1216
1217	idedisk_setup(drive);
1218	if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
1219		printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
1220			drive->name, drive->head);
1221		drive->attach = 0;
1222	} else
1223		drive->attach = 1;
1224
1225	g->minors = 1 << PARTN_BITS;
1226	g->driverfs_dev = &drive->gendev;
1227	g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
1228	set_capacity(g, idedisk_capacity(drive));
1229	g->fops = &idedisk_ops;
1230	add_disk(g);
1231	return 0;
1232
1233out_free_idkp:
1234	kfree(idkp);
1235failed:
1236	return -ENODEV;
1237}
1238
1239static void __exit idedisk_exit (void)
1240{
1241	driver_unregister(&idedisk_driver.gen_driver);
1242}
1243
1244static int __init idedisk_init(void)
1245{
1246	return driver_register(&idedisk_driver.gen_driver);
1247}
1248
1249MODULE_ALIAS("ide:*m-disk*");
1250module_init(idedisk_init);
1251module_exit(idedisk_exit);
1252MODULE_LICENSE("GPL");
1253