ide-floppy.c revision ac0b0113ddbab3ed2388132d368c97292f9f3c84
1/* 2 * IDE ATAPI floppy driver. 3 * 4 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il> 5 * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net> 6 * Copyright (C) 2005 Bartlomiej Zolnierkiewicz 7 * 8 * This driver supports the following IDE floppy drives: 9 * 10 * LS-120/240 SuperDisk 11 * Iomega Zip 100/250 12 * Iomega PC Card Clik!/PocketZip 13 * 14 * For a historical changelog see 15 * Documentation/ide/ChangeLog.ide-floppy.1996-2002 16 */ 17 18#include <linux/types.h> 19#include <linux/string.h> 20#include <linux/kernel.h> 21#include <linux/delay.h> 22#include <linux/timer.h> 23#include <linux/mm.h> 24#include <linux/interrupt.h> 25#include <linux/major.h> 26#include <linux/errno.h> 27#include <linux/genhd.h> 28#include <linux/slab.h> 29#include <linux/cdrom.h> 30#include <linux/ide.h> 31#include <linux/hdreg.h> 32#include <linux/bitops.h> 33#include <linux/mutex.h> 34#include <linux/scatterlist.h> 35 36#include <scsi/scsi_ioctl.h> 37 38#include <asm/byteorder.h> 39#include <linux/irq.h> 40#include <linux/uaccess.h> 41#include <linux/io.h> 42#include <asm/unaligned.h> 43 44#include "ide-floppy.h" 45 46/* 47 * After each failed packet command we issue a request sense command and retry 48 * the packet command IDEFLOPPY_MAX_PC_RETRIES times. 49 */ 50#define IDEFLOPPY_MAX_PC_RETRIES 3 51 52/* format capacities descriptor codes */ 53#define CAPACITY_INVALID 0x00 54#define CAPACITY_UNFORMATTED 0x01 55#define CAPACITY_CURRENT 0x02 56#define CAPACITY_NO_CARTRIDGE 0x03 57 58/* 59 * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit 60 * was apparently being deasserted before the unit was ready to receive data. 61 */ 62#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */ 63 64static int ide_floppy_callback(ide_drive_t *drive, int dsc) 65{ 66 struct ide_disk_obj *floppy = drive->driver_data; 67 struct ide_atapi_pc *pc = drive->pc; 68 struct request *rq = pc->rq; 69 int uptodate = pc->error ? 0 : 1; 70 71 ide_debug_log(IDE_DBG_FUNC, "enter"); 72 73 if (drive->failed_pc == pc) 74 drive->failed_pc = NULL; 75 76 if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || 77 (rq && blk_pc_request(rq))) 78 uptodate = 1; /* FIXME */ 79 else if (pc->c[0] == GPCMD_REQUEST_SENSE) { 80 u8 *buf = pc->buf; 81 82 if (!pc->error) { 83 floppy->sense_key = buf[2] & 0x0F; 84 floppy->asc = buf[12]; 85 floppy->ascq = buf[13]; 86 floppy->progress_indication = buf[15] & 0x80 ? 87 (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; 88 89 if (drive->failed_pc) 90 ide_debug_log(IDE_DBG_PC, "pc = %x", 91 drive->failed_pc->c[0]); 92 93 ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x," 94 "ascq = %x", floppy->sense_key, 95 floppy->asc, floppy->ascq); 96 } else 97 printk(KERN_ERR PFX "Error in REQUEST SENSE itself - " 98 "Aborting request!\n"); 99 } 100 101 if (blk_special_request(rq)) 102 rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL; 103 104 return uptodate; 105} 106 107static void ide_floppy_report_error(struct ide_disk_obj *floppy, 108 struct ide_atapi_pc *pc) 109{ 110 /* supress error messages resulting from Medium not present */ 111 if (floppy->sense_key == 0x02 && 112 floppy->asc == 0x3a && 113 floppy->ascq == 0x00) 114 return; 115 116 printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, " 117 "asc = %2x, ascq = %2x\n", 118 floppy->drive->name, pc->c[0], floppy->sense_key, 119 floppy->asc, floppy->ascq); 120 121} 122 123static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, 124 struct ide_cmd *cmd, 125 struct ide_atapi_pc *pc) 126{ 127 struct ide_disk_obj *floppy = drive->driver_data; 128 129 if (drive->failed_pc == NULL && 130 pc->c[0] != GPCMD_REQUEST_SENSE) 131 drive->failed_pc = pc; 132 133 /* Set the current packet command */ 134 drive->pc = pc; 135 136 if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { 137 if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) 138 ide_floppy_report_error(floppy, pc); 139 /* Giving up */ 140 pc->error = IDE_DRV_ERROR_GENERAL; 141 142 drive->failed_pc = NULL; 143 drive->pc_callback(drive, 0); 144 return ide_stopped; 145 } 146 147 ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries); 148 149 pc->retries++; 150 151 return ide_issue_pc(drive, cmd); 152} 153 154void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) 155{ 156 ide_init_pc(pc); 157 pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; 158 pc->c[7] = 255; 159 pc->c[8] = 255; 160 pc->req_xfer = 255; 161} 162 163/* A mode sense command is used to "sense" floppy parameters. */ 164void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) 165{ 166 u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ 167 168 ide_init_pc(pc); 169 pc->c[0] = GPCMD_MODE_SENSE_10; 170 pc->c[1] = 0; 171 pc->c[2] = page_code; 172 173 switch (page_code) { 174 case IDEFLOPPY_CAPABILITIES_PAGE: 175 length += 12; 176 break; 177 case IDEFLOPPY_FLEXIBLE_DISK_PAGE: 178 length += 32; 179 break; 180 default: 181 printk(KERN_ERR PFX "unsupported page code in %s\n", __func__); 182 } 183 put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); 184 pc->req_xfer = length; 185} 186 187static void idefloppy_create_rw_cmd(ide_drive_t *drive, 188 struct ide_atapi_pc *pc, struct request *rq, 189 unsigned long sector) 190{ 191 struct ide_disk_obj *floppy = drive->driver_data; 192 int block = sector / floppy->bs_factor; 193 int blocks = rq->nr_sectors / floppy->bs_factor; 194 int cmd = rq_data_dir(rq); 195 196 ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks); 197 198 ide_init_pc(pc); 199 pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; 200 put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); 201 put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); 202 203 memcpy(rq->cmd, pc->c, 12); 204 205 pc->rq = rq; 206 if (rq->cmd_flags & REQ_RW) 207 pc->flags |= PC_FLAG_WRITING; 208 pc->buf = NULL; 209 pc->req_xfer = pc->buf_size = blocks * floppy->block_size; 210 pc->flags |= PC_FLAG_DMA_OK; 211} 212 213static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, 214 struct ide_atapi_pc *pc, struct request *rq) 215{ 216 ide_init_pc(pc); 217 memcpy(pc->c, rq->cmd, sizeof(pc->c)); 218 pc->rq = rq; 219 if (rq->data_len) { 220 pc->flags |= PC_FLAG_DMA_OK; 221 if (rq_data_dir(rq) == WRITE) 222 pc->flags |= PC_FLAG_WRITING; 223 } 224 /* pio will be performed by ide_pio_bytes() which handles sg fine */ 225 pc->buf = NULL; 226 pc->req_xfer = pc->buf_size = rq->data_len; 227} 228 229static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, 230 struct request *rq, sector_t block) 231{ 232 struct ide_disk_obj *floppy = drive->driver_data; 233 struct ide_cmd cmd; 234 struct ide_atapi_pc *pc; 235 236 ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]); 237 238 if (drive->debug_mask & IDE_DBG_RQ) 239 blk_dump_rq_flags(rq, (rq->rq_disk 240 ? rq->rq_disk->disk_name 241 : "dev?")); 242 243 if (rq->errors >= ERROR_MAX) { 244 if (drive->failed_pc) { 245 ide_floppy_report_error(floppy, drive->failed_pc); 246 drive->failed_pc = NULL; 247 } else 248 printk(KERN_ERR PFX "%s: I/O error\n", drive->name); 249 250 if (blk_special_request(rq)) { 251 rq->errors = 0; 252 ide_complete_rq(drive, 0, blk_rq_bytes(rq)); 253 return ide_stopped; 254 } else 255 goto out_end; 256 } 257 if (blk_fs_request(rq)) { 258 if (((long)rq->sector % floppy->bs_factor) || 259 (rq->nr_sectors % floppy->bs_factor)) { 260 printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", 261 drive->name); 262 goto out_end; 263 } 264 pc = &floppy->queued_pc; 265 idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); 266 } else if (blk_special_request(rq)) { 267 pc = (struct ide_atapi_pc *)rq->special; 268 } else if (blk_pc_request(rq)) { 269 pc = &floppy->queued_pc; 270 idefloppy_blockpc_cmd(floppy, pc, rq); 271 } else { 272 blk_dump_rq_flags(rq, PFX "unsupported command in queue"); 273 goto out_end; 274 } 275 276 memset(&cmd, 0, sizeof(cmd)); 277 278 if (rq_data_dir(rq)) 279 cmd.tf_flags |= IDE_TFLAG_WRITE; 280 281 cmd.rq = rq; 282 283 if (blk_fs_request(rq) || pc->req_xfer) { 284 ide_init_sg_cmd(&cmd, pc->req_xfer); 285 ide_map_sg(drive, &cmd); 286 } 287 288 pc->rq = rq; 289 290 return ide_floppy_issue_pc(drive, &cmd, pc); 291out_end: 292 drive->failed_pc = NULL; 293 if (blk_fs_request(rq) == 0 && rq->errors == 0) 294 rq->errors = -EIO; 295 ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); 296 return ide_stopped; 297} 298 299/* 300 * Look at the flexible disk page parameters. We ignore the CHS capacity 301 * parameters and use the LBA parameters instead. 302 */ 303static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive, 304 struct ide_atapi_pc *pc) 305{ 306 struct ide_disk_obj *floppy = drive->driver_data; 307 struct gendisk *disk = floppy->disk; 308 u8 *page; 309 int capacity, lba_capacity; 310 u16 transfer_rate, sector_size, cyls, rpm; 311 u8 heads, sectors; 312 313 ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); 314 315 if (ide_queue_pc_tail(drive, disk, pc)) { 316 printk(KERN_ERR PFX "Can't get flexible disk page params\n"); 317 return 1; 318 } 319 320 if (pc->buf[3] & 0x80) 321 drive->dev_flags |= IDE_DFLAG_WP; 322 else 323 drive->dev_flags &= ~IDE_DFLAG_WP; 324 325 set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP)); 326 327 page = &pc->buf[8]; 328 329 transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]); 330 sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]); 331 cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]); 332 rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]); 333 heads = pc->buf[8 + 4]; 334 sectors = pc->buf[8 + 5]; 335 336 capacity = cyls * heads * sectors * sector_size; 337 338 if (memcmp(page, &floppy->flexible_disk_page, 32)) 339 printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, " 340 "%d sector size, %d rpm\n", 341 drive->name, capacity / 1024, cyls, heads, 342 sectors, transfer_rate / 8, sector_size, rpm); 343 344 memcpy(&floppy->flexible_disk_page, page, 32); 345 drive->bios_cyl = cyls; 346 drive->bios_head = heads; 347 drive->bios_sect = sectors; 348 lba_capacity = floppy->blocks * floppy->block_size; 349 350 if (capacity < lba_capacity) { 351 printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d " 352 "bytes, but the drive only handles %d\n", 353 drive->name, lba_capacity, capacity); 354 floppy->blocks = floppy->block_size ? 355 capacity / floppy->block_size : 0; 356 drive->capacity64 = floppy->blocks * floppy->bs_factor; 357 } 358 359 return 0; 360} 361 362/* 363 * Determine if a media is present in the floppy drive, and if so, its LBA 364 * capacity. 365 */ 366static int ide_floppy_get_capacity(ide_drive_t *drive) 367{ 368 struct ide_disk_obj *floppy = drive->driver_data; 369 struct gendisk *disk = floppy->disk; 370 struct ide_atapi_pc pc; 371 u8 *cap_desc; 372 u8 pc_buf[256], header_len, desc_cnt; 373 int i, rc = 1, blocks, length; 374 375 ide_debug_log(IDE_DBG_FUNC, "enter"); 376 377 drive->bios_cyl = 0; 378 drive->bios_head = drive->bios_sect = 0; 379 floppy->blocks = 0; 380 floppy->bs_factor = 1; 381 drive->capacity64 = 0; 382 383 ide_floppy_create_read_capacity_cmd(&pc); 384 pc.buf = &pc_buf[0]; 385 pc.buf_size = sizeof(pc_buf); 386 387 if (ide_queue_pc_tail(drive, disk, &pc)) { 388 printk(KERN_ERR PFX "Can't get floppy parameters\n"); 389 return 1; 390 } 391 header_len = pc.buf[3]; 392 cap_desc = &pc.buf[4]; 393 desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ 394 395 for (i = 0; i < desc_cnt; i++) { 396 unsigned int desc_start = 4 + i*8; 397 398 blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); 399 length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); 400 401 ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, " 402 "%d sector size", 403 i, blocks * length / 1024, 404 blocks, length); 405 406 if (i) 407 continue; 408 /* 409 * the code below is valid only for the 1st descriptor, ie i=0 410 */ 411 412 switch (pc.buf[desc_start + 4] & 0x03) { 413 /* Clik! drive returns this instead of CAPACITY_CURRENT */ 414 case CAPACITY_UNFORMATTED: 415 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) 416 /* 417 * If it is not a clik drive, break out 418 * (maintains previous driver behaviour) 419 */ 420 break; 421 case CAPACITY_CURRENT: 422 /* Normal Zip/LS-120 disks */ 423 if (memcmp(cap_desc, &floppy->cap_desc, 8)) 424 printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d " 425 "sector size\n", 426 drive->name, blocks * length / 1024, 427 blocks, length); 428 memcpy(&floppy->cap_desc, cap_desc, 8); 429 430 if (!length || length % 512) { 431 printk(KERN_NOTICE PFX "%s: %d bytes block size" 432 " not supported\n", drive->name, length); 433 } else { 434 floppy->blocks = blocks; 435 floppy->block_size = length; 436 floppy->bs_factor = length / 512; 437 if (floppy->bs_factor != 1) 438 printk(KERN_NOTICE PFX "%s: Warning: " 439 "non 512 bytes block size not " 440 "fully supported\n", 441 drive->name); 442 drive->capacity64 = 443 floppy->blocks * floppy->bs_factor; 444 rc = 0; 445 } 446 break; 447 case CAPACITY_NO_CARTRIDGE: 448 /* 449 * This is a KERN_ERR so it appears on screen 450 * for the user to see 451 */ 452 printk(KERN_ERR PFX "%s: No disk in drive\n", 453 drive->name); 454 break; 455 case CAPACITY_INVALID: 456 printk(KERN_ERR PFX "%s: Invalid capacity for disk " 457 "in drive\n", drive->name); 458 break; 459 } 460 ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d", 461 pc.buf[desc_start + 4] & 0x03); 462 } 463 464 /* Clik! disk does not support get_flexible_disk_page */ 465 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) 466 (void) ide_floppy_get_flexible_disk_page(drive, &pc); 467 468 return rc; 469} 470 471static void ide_floppy_setup(ide_drive_t *drive) 472{ 473 struct ide_disk_obj *floppy = drive->driver_data; 474 u16 *id = drive->id; 475 476 drive->pc_callback = ide_floppy_callback; 477 478 /* 479 * We used to check revisions here. At this point however I'm giving up. 480 * Just assume they are all broken, its easier. 481 * 482 * The actual reason for the workarounds was likely a driver bug after 483 * all rather than a firmware bug, and the workaround below used to hide 484 * it. It should be fixed as of version 1.9, but to be on the safe side 485 * we'll leave the limitation below for the 2.2.x tree. 486 */ 487 if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) { 488 drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE; 489 /* This value will be visible in the /proc/ide/hdx/settings */ 490 drive->pc_delay = IDEFLOPPY_PC_DELAY; 491 blk_queue_max_sectors(drive->queue, 64); 492 } 493 494 /* 495 * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes 496 * nasty clicking noises without it, so please don't remove this. 497 */ 498 if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) { 499 blk_queue_max_sectors(drive->queue, 64); 500 drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE; 501 /* IOMEGA Clik! drives do not support lock/unlock commands */ 502 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; 503 } 504 505 (void) ide_floppy_get_capacity(drive); 506 507 ide_proc_register_driver(drive, floppy->driver); 508 509 drive->dev_flags |= IDE_DFLAG_ATTACH; 510} 511 512static void ide_floppy_flush(ide_drive_t *drive) 513{ 514} 515 516static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk) 517{ 518 int ret = 0; 519 520 if (ide_do_test_unit_ready(drive, disk)) 521 ide_do_start_stop(drive, disk, 1); 522 523 ret = ide_floppy_get_capacity(drive); 524 525 set_capacity(disk, ide_gd_capacity(drive)); 526 527 return ret; 528} 529 530const struct ide_disk_ops ide_atapi_disk_ops = { 531 .check = ide_check_atapi_device, 532 .get_capacity = ide_floppy_get_capacity, 533 .setup = ide_floppy_setup, 534 .flush = ide_floppy_flush, 535 .init_media = ide_floppy_init_media, 536 .set_doorlock = ide_set_media_lock, 537 .do_request = ide_floppy_do_request, 538 .ioctl = ide_floppy_ioctl, 539}; 540