ide-probe.c revision f367bed005b06db7067fc378a5f2253fac54e5d9
1/* 2 * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) 3 * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz 4 */ 5 6/* 7 * Mostly written by Mark Lord <mlord@pobox.com> 8 * and Gadi Oxman <gadio@netvision.net.il> 9 * and Andre Hedrick <andre@linux-ide.org> 10 * 11 * See linux/MAINTAINERS for address of current maintainer. 12 * 13 * This is the IDE probe module, as evolved from hd.c and ide.c. 14 * 15 * -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot 16 * by Andrea Arcangeli 17 */ 18 19#include <linux/module.h> 20#include <linux/types.h> 21#include <linux/string.h> 22#include <linux/kernel.h> 23#include <linux/timer.h> 24#include <linux/mm.h> 25#include <linux/interrupt.h> 26#include <linux/major.h> 27#include <linux/errno.h> 28#include <linux/genhd.h> 29#include <linux/slab.h> 30#include <linux/delay.h> 31#include <linux/ide.h> 32#include <linux/spinlock.h> 33#include <linux/kmod.h> 34#include <linux/pci.h> 35#include <linux/scatterlist.h> 36 37#include <asm/byteorder.h> 38#include <asm/irq.h> 39#include <asm/uaccess.h> 40#include <asm/io.h> 41 42/** 43 * generic_id - add a generic drive id 44 * @drive: drive to make an ID block for 45 * 46 * Add a fake id field to the drive we are passed. This allows 47 * use to skip a ton of NULL checks (which people always miss) 48 * and make drive properties unconditional outside of this file 49 */ 50 51static void generic_id(ide_drive_t *drive) 52{ 53 drive->id->cyls = drive->cyl; 54 drive->id->heads = drive->head; 55 drive->id->sectors = drive->sect; 56 drive->id->cur_cyls = drive->cyl; 57 drive->id->cur_heads = drive->head; 58 drive->id->cur_sectors = drive->sect; 59} 60 61static void ide_disk_init_chs(ide_drive_t *drive) 62{ 63 struct hd_driveid *id = drive->id; 64 65 /* Extract geometry if we did not already have one for the drive */ 66 if (!drive->cyl || !drive->head || !drive->sect) { 67 drive->cyl = drive->bios_cyl = id->cyls; 68 drive->head = drive->bios_head = id->heads; 69 drive->sect = drive->bios_sect = id->sectors; 70 } 71 72 /* Handle logical geometry translation by the drive */ 73 if ((id->field_valid & 1) && id->cur_cyls && 74 id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) { 75 drive->cyl = id->cur_cyls; 76 drive->head = id->cur_heads; 77 drive->sect = id->cur_sectors; 78 } 79 80 /* Use physical geometry if what we have still makes no sense */ 81 if (drive->head > 16 && id->heads && id->heads <= 16) { 82 drive->cyl = id->cyls; 83 drive->head = id->heads; 84 drive->sect = id->sectors; 85 } 86} 87 88static void ide_disk_init_mult_count(ide_drive_t *drive) 89{ 90 struct hd_driveid *id = drive->id; 91 92 drive->mult_count = 0; 93 if (id->max_multsect) { 94#ifdef CONFIG_IDEDISK_MULTI_MODE 95 id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0; 96 id->multsect_valid = id->multsect ? 1 : 0; 97 drive->mult_req = id->multsect_valid ? id->max_multsect : 0; 98 drive->special.b.set_multmode = drive->mult_req ? 1 : 0; 99#else /* original, pre IDE-NFG, per request of AC */ 100 drive->mult_req = 0; 101 if (drive->mult_req > id->max_multsect) 102 drive->mult_req = id->max_multsect; 103 if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect)) 104 drive->special.b.set_multmode = 1; 105#endif 106 } 107} 108 109/** 110 * do_identify - identify a drive 111 * @drive: drive to identify 112 * @cmd: command used 113 * 114 * Called when we have issued a drive identify command to 115 * read and parse the results. This function is run with 116 * interrupts disabled. 117 */ 118 119static inline void do_identify (ide_drive_t *drive, u8 cmd) 120{ 121 ide_hwif_t *hwif = HWIF(drive); 122 int bswap = 1; 123 struct hd_driveid *id; 124 125 id = drive->id; 126 /* read 512 bytes of id info */ 127 hwif->ata_input_data(drive, id, SECTOR_WORDS); 128 129 drive->id_read = 1; 130 local_irq_enable(); 131#ifdef DEBUG 132 printk(KERN_INFO "%s: dumping identify data\n", drive->name); 133 ide_dump_identify((u8 *)id); 134#endif 135 ide_fix_driveid(id); 136 137#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA) 138 /* 139 * EATA SCSI controllers do a hardware ATA emulation: 140 * Ignore them if there is a driver for them available. 141 */ 142 if ((id->model[0] == 'P' && id->model[1] == 'M') || 143 (id->model[0] == 'S' && id->model[1] == 'K')) { 144 printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model); 145 goto err_misc; 146 } 147#endif /* CONFIG_SCSI_EATA || CONFIG_SCSI_EATA_PIO */ 148 149 /* 150 * WIN_IDENTIFY returns little-endian info, 151 * WIN_PIDENTIFY *usually* returns little-endian info. 152 */ 153 if (cmd == WIN_PIDENTIFY) { 154 if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */ 155 || (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */ 156 || (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */ 157 /* Vertos drives may still be weird */ 158 bswap ^= 1; 159 } 160 ide_fixstring(id->model, sizeof(id->model), bswap); 161 ide_fixstring(id->fw_rev, sizeof(id->fw_rev), bswap); 162 ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap); 163 164 /* we depend on this a lot! */ 165 id->model[sizeof(id->model)-1] = '\0'; 166 167 if (strstr(id->model, "E X A B Y T E N E S T")) 168 goto err_misc; 169 170 printk("%s: %s, ", drive->name, id->model); 171 drive->present = 1; 172 drive->dead = 0; 173 174 /* 175 * Check for an ATAPI device 176 */ 177 if (cmd == WIN_PIDENTIFY) { 178 u8 type = (id->config >> 8) & 0x1f; 179 printk("ATAPI "); 180 switch (type) { 181 case ide_floppy: 182 if (!strstr(id->model, "CD-ROM")) { 183 if (!strstr(id->model, "oppy") && 184 !strstr(id->model, "poyp") && 185 !strstr(id->model, "ZIP")) 186 printk("cdrom or floppy?, assuming "); 187 if (drive->media != ide_cdrom) { 188 printk ("FLOPPY"); 189 drive->removable = 1; 190 break; 191 } 192 } 193 /* Early cdrom models used zero */ 194 type = ide_cdrom; 195 case ide_cdrom: 196 drive->removable = 1; 197#ifdef CONFIG_PPC 198 /* kludge for Apple PowerBook internal zip */ 199 if (!strstr(id->model, "CD-ROM") && 200 strstr(id->model, "ZIP")) { 201 printk ("FLOPPY"); 202 type = ide_floppy; 203 break; 204 } 205#endif 206 printk ("CD/DVD-ROM"); 207 break; 208 case ide_tape: 209 printk ("TAPE"); 210 break; 211 case ide_optical: 212 printk ("OPTICAL"); 213 drive->removable = 1; 214 break; 215 default: 216 printk("UNKNOWN (type %d)", type); 217 break; 218 } 219 printk (" drive\n"); 220 drive->media = type; 221 /* an ATAPI device ignores DRDY */ 222 drive->ready_stat = 0; 223 return; 224 } 225 226 /* 227 * Not an ATAPI device: looks like a "regular" hard disk 228 */ 229 230 /* 231 * 0x848a = CompactFlash device 232 * These are *not* removable in Linux definition of the term 233 */ 234 235 if ((id->config != 0x848a) && (id->config & (1<<7))) 236 drive->removable = 1; 237 238 drive->media = ide_disk; 239 printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" ); 240 241 return; 242 243err_misc: 244 kfree(id); 245 drive->present = 0; 246 return; 247} 248 249/** 250 * actual_try_to_identify - send ata/atapi identify 251 * @drive: drive to identify 252 * @cmd: command to use 253 * 254 * try_to_identify() sends an ATA(PI) IDENTIFY request to a drive 255 * and waits for a response. It also monitors irqs while this is 256 * happening, in hope of automatically determining which one is 257 * being used by the interface. 258 * 259 * Returns: 0 device was identified 260 * 1 device timed-out (no response to identify request) 261 * 2 device aborted the command (refused to identify itself) 262 */ 263 264static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) 265{ 266 ide_hwif_t *hwif = HWIF(drive); 267 int use_altstatus = 0, rc; 268 unsigned long timeout; 269 u8 s = 0, a = 0; 270 271 /* take a deep breath */ 272 msleep(50); 273 274 if (IDE_CONTROL_REG) { 275 a = ide_read_altstatus(drive); 276 s = ide_read_status(drive); 277 if ((a ^ s) & ~INDEX_STAT) 278 /* ancient Seagate drives, broken interfaces */ 279 printk(KERN_INFO "%s: probing with STATUS(0x%02x) " 280 "instead of ALTSTATUS(0x%02x)\n", 281 drive->name, s, a); 282 else 283 /* use non-intrusive polling */ 284 use_altstatus = 1; 285 } 286 287 /* set features register for atapi 288 * identify command to be sure of reply 289 */ 290 if ((cmd == WIN_PIDENTIFY)) 291 /* disable dma & overlap */ 292 hwif->OUTB(0, IDE_FEATURE_REG); 293 294 /* ask drive for ID */ 295 hwif->OUTB(cmd, IDE_COMMAND_REG); 296 297 timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; 298 timeout += jiffies; 299 do { 300 if (time_after(jiffies, timeout)) { 301 /* drive timed-out */ 302 return 1; 303 } 304 /* give drive a breather */ 305 msleep(50); 306 s = use_altstatus ? ide_read_altstatus(drive) 307 : ide_read_status(drive); 308 } while (s & BUSY_STAT); 309 310 /* wait for IRQ and DRQ_STAT */ 311 msleep(50); 312 s = ide_read_status(drive); 313 314 if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) { 315 unsigned long flags; 316 317 /* local CPU only; some systems need this */ 318 local_irq_save(flags); 319 /* drive returned ID */ 320 do_identify(drive, cmd); 321 /* drive responded with ID */ 322 rc = 0; 323 /* clear drive IRQ */ 324 (void)ide_read_status(drive); 325 local_irq_restore(flags); 326 } else { 327 /* drive refused ID */ 328 rc = 2; 329 } 330 return rc; 331} 332 333/** 334 * try_to_identify - try to identify a drive 335 * @drive: drive to probe 336 * @cmd: command to use 337 * 338 * Issue the identify command and then do IRQ probing to 339 * complete the identification when needed by finding the 340 * IRQ the drive is attached to 341 */ 342 343static int try_to_identify (ide_drive_t *drive, u8 cmd) 344{ 345 ide_hwif_t *hwif = HWIF(drive); 346 int retval; 347 int autoprobe = 0; 348 unsigned long cookie = 0; 349 350 /* 351 * Disable device irq unless we need to 352 * probe for it. Otherwise we'll get spurious 353 * interrupts during the identify-phase that 354 * the irq handler isn't expecting. 355 */ 356 if (IDE_CONTROL_REG) { 357 if (!hwif->irq) { 358 autoprobe = 1; 359 cookie = probe_irq_on(); 360 } 361 ide_set_irq(drive, autoprobe); 362 } 363 364 retval = actual_try_to_identify(drive, cmd); 365 366 if (autoprobe) { 367 int irq; 368 369 ide_set_irq(drive, 0); 370 /* clear drive IRQ */ 371 (void)ide_read_status(drive); 372 udelay(5); 373 irq = probe_irq_off(cookie); 374 if (!hwif->irq) { 375 if (irq > 0) { 376 hwif->irq = irq; 377 } else { 378 /* Mmmm.. multiple IRQs.. 379 * don't know which was ours 380 */ 381 printk("%s: IRQ probe failed (0x%lx)\n", 382 drive->name, cookie); 383 } 384 } 385 } 386 return retval; 387} 388 389static int ide_busy_sleep(ide_hwif_t *hwif) 390{ 391 unsigned long timeout = jiffies + WAIT_WORSTCASE; 392 u8 stat; 393 394 do { 395 msleep(50); 396 stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); 397 if ((stat & BUSY_STAT) == 0) 398 return 0; 399 } while (time_before(jiffies, timeout)); 400 401 return 1; 402} 403 404/** 405 * do_probe - probe an IDE device 406 * @drive: drive to probe 407 * @cmd: command to use 408 * 409 * do_probe() has the difficult job of finding a drive if it exists, 410 * without getting hung up if it doesn't exist, without trampling on 411 * ethernet cards, and without leaving any IRQs dangling to haunt us later. 412 * 413 * If a drive is "known" to exist (from CMOS or kernel parameters), 414 * but does not respond right away, the probe will "hang in there" 415 * for the maximum wait time (about 30 seconds), otherwise it will 416 * exit much more quickly. 417 * 418 * Returns: 0 device was identified 419 * 1 device timed-out (no response to identify request) 420 * 2 device aborted the command (refused to identify itself) 421 * 3 bad status from device (possible for ATAPI drives) 422 * 4 probe was not attempted because failure was obvious 423 */ 424 425static int do_probe (ide_drive_t *drive, u8 cmd) 426{ 427 ide_hwif_t *hwif = HWIF(drive); 428 int rc; 429 u8 stat; 430 431 if (drive->present) { 432 /* avoid waiting for inappropriate probes */ 433 if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY)) 434 return 4; 435 } 436#ifdef DEBUG 437 printk("probing for %s: present=%d, media=%d, probetype=%s\n", 438 drive->name, drive->present, drive->media, 439 (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI"); 440#endif 441 442 /* needed for some systems 443 * (e.g. crw9624 as drive0 with disk as slave) 444 */ 445 msleep(50); 446 SELECT_DRIVE(drive); 447 msleep(50); 448 if (hwif->INB(IDE_SELECT_REG) != drive->select.all && !drive->present) { 449 if (drive->select.b.unit != 0) { 450 /* exit with drive0 selected */ 451 SELECT_DRIVE(&hwif->drives[0]); 452 /* allow BUSY_STAT to assert & clear */ 453 msleep(50); 454 } 455 /* no i/f present: mmm.. this should be a 4 -ml */ 456 return 3; 457 } 458 459 stat = ide_read_status(drive); 460 461 if (OK_STAT(stat, READY_STAT, BUSY_STAT) || 462 drive->present || cmd == WIN_PIDENTIFY) { 463 /* send cmd and wait */ 464 if ((rc = try_to_identify(drive, cmd))) { 465 /* failed: try again */ 466 rc = try_to_identify(drive,cmd); 467 } 468 469 stat = ide_read_status(drive); 470 471 if (stat == (BUSY_STAT | READY_STAT)) 472 return 4; 473 474 if ((rc == 1 && cmd == WIN_PIDENTIFY) && 475 ((drive->autotune == IDE_TUNE_DEFAULT) || 476 (drive->autotune == IDE_TUNE_AUTO))) { 477 printk(KERN_ERR "%s: no response (status = 0x%02x), " 478 "resetting drive\n", drive->name, stat); 479 msleep(50); 480 hwif->OUTB(drive->select.all, IDE_SELECT_REG); 481 msleep(50); 482 hwif->OUTB(WIN_SRST, IDE_COMMAND_REG); 483 (void)ide_busy_sleep(hwif); 484 rc = try_to_identify(drive, cmd); 485 } 486 487 /* ensure drive IRQ is clear */ 488 stat = ide_read_status(drive); 489 490 if (rc == 1) 491 printk(KERN_ERR "%s: no response (status = 0x%02x)\n", 492 drive->name, stat); 493 } else { 494 /* not present or maybe ATAPI */ 495 rc = 3; 496 } 497 if (drive->select.b.unit != 0) { 498 /* exit with drive0 selected */ 499 SELECT_DRIVE(&hwif->drives[0]); 500 msleep(50); 501 /* ensure drive irq is clear */ 502 (void)ide_read_status(drive); 503 } 504 return rc; 505} 506 507/* 508 * 509 */ 510static void enable_nest (ide_drive_t *drive) 511{ 512 ide_hwif_t *hwif = HWIF(drive); 513 u8 stat; 514 515 printk("%s: enabling %s -- ", hwif->name, drive->id->model); 516 SELECT_DRIVE(drive); 517 msleep(50); 518 hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG); 519 520 if (ide_busy_sleep(hwif)) { 521 printk(KERN_CONT "failed (timeout)\n"); 522 return; 523 } 524 525 msleep(50); 526 527 stat = ide_read_status(drive); 528 529 if (!OK_STAT(stat, 0, BAD_STAT)) 530 printk(KERN_CONT "failed (status = 0x%02x)\n", stat); 531 else 532 printk(KERN_CONT "success\n"); 533 534 /* if !(success||timed-out) */ 535 if (do_probe(drive, WIN_IDENTIFY) >= 2) { 536 /* look for ATAPI device */ 537 (void) do_probe(drive, WIN_PIDENTIFY); 538 } 539} 540 541/** 542 * probe_for_drives - upper level drive probe 543 * @drive: drive to probe for 544 * 545 * probe_for_drive() tests for existence of a given drive using do_probe() 546 * and presents things to the user as needed. 547 * 548 * Returns: 0 no device was found 549 * 1 device was found (note: drive->present might 550 * still be 0) 551 */ 552 553static inline u8 probe_for_drive (ide_drive_t *drive) 554{ 555 /* 556 * In order to keep things simple we have an id 557 * block for all drives at all times. If the device 558 * is pre ATA or refuses ATA/ATAPI identify we 559 * will add faked data to this. 560 * 561 * Also note that 0 everywhere means "can't do X" 562 */ 563 564 drive->id = kzalloc(SECTOR_WORDS *4, GFP_KERNEL); 565 drive->id_read = 0; 566 if(drive->id == NULL) 567 { 568 printk(KERN_ERR "ide: out of memory for id data.\n"); 569 return 0; 570 } 571 strcpy(drive->id->model, "UNKNOWN"); 572 573 /* skip probing? */ 574 if (!drive->noprobe) 575 { 576 /* if !(success||timed-out) */ 577 if (do_probe(drive, WIN_IDENTIFY) >= 2) { 578 /* look for ATAPI device */ 579 (void) do_probe(drive, WIN_PIDENTIFY); 580 } 581 if (!drive->present) 582 /* drive not found */ 583 return 0; 584 if (strstr(drive->id->model, "E X A B Y T E N E S T")) 585 enable_nest(drive); 586 587 /* identification failed? */ 588 if (!drive->id_read) { 589 if (drive->media == ide_disk) { 590 printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n", 591 drive->name, drive->cyl, 592 drive->head, drive->sect); 593 } else if (drive->media == ide_cdrom) { 594 printk(KERN_INFO "%s: ATAPI cdrom (?)\n", drive->name); 595 } else { 596 /* nuke it */ 597 printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name); 598 drive->present = 0; 599 } 600 } 601 /* drive was found */ 602 } 603 if(!drive->present) 604 return 0; 605 /* The drive wasn't being helpful. Add generic info only */ 606 if (drive->id_read == 0) { 607 generic_id(drive); 608 return 1; 609 } 610 611 if (drive->media == ide_disk) { 612 ide_disk_init_chs(drive); 613 ide_disk_init_mult_count(drive); 614 } 615 616 return drive->present; 617} 618 619static void hwif_release_dev (struct device *dev) 620{ 621 ide_hwif_t *hwif = container_of(dev, ide_hwif_t, gendev); 622 623 complete(&hwif->gendev_rel_comp); 624} 625 626static void ide_register_port(ide_hwif_t *hwif) 627{ 628 int ret; 629 630 /* register with global device tree */ 631 strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE); 632 hwif->gendev.driver_data = hwif; 633 if (hwif->gendev.parent == NULL) { 634 if (hwif->dev) 635 hwif->gendev.parent = hwif->dev; 636 else 637 /* Would like to do = &device_legacy */ 638 hwif->gendev.parent = NULL; 639 } 640 hwif->gendev.release = hwif_release_dev; 641 ret = device_register(&hwif->gendev); 642 if (ret < 0) 643 printk(KERN_WARNING "IDE: %s: device_register error: %d\n", 644 __FUNCTION__, ret); 645} 646 647/** 648 * ide_port_wait_ready - wait for port to become ready 649 * @hwif: IDE port 650 * 651 * This is needed on some PPCs and a bunch of BIOS-less embedded 652 * platforms. Typical cases are: 653 * 654 * - The firmware hard reset the disk before booting the kernel, 655 * the drive is still doing it's poweron-reset sequence, that 656 * can take up to 30 seconds. 657 * 658 * - The firmware does nothing (or no firmware), the device is 659 * still in POST state (same as above actually). 660 * 661 * - Some CD/DVD/Writer combo drives tend to drive the bus during 662 * their reset sequence even when they are non-selected slave 663 * devices, thus preventing discovery of the main HD. 664 * 665 * Doing this wait-for-non-busy should not harm any existing 666 * configuration and fix some issues like the above. 667 * 668 * BenH. 669 * 670 * Returns 0 on success, error code (< 0) otherwise. 671 */ 672 673static int ide_port_wait_ready(ide_hwif_t *hwif) 674{ 675 int unit, rc; 676 677 printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name); 678 679 /* Let HW settle down a bit from whatever init state we 680 * come from */ 681 mdelay(2); 682 683 /* Wait for BSY bit to go away, spec timeout is 30 seconds, 684 * I know of at least one disk who takes 31 seconds, I use 35 685 * here to be safe 686 */ 687 rc = ide_wait_not_busy(hwif, 35000); 688 if (rc) 689 return rc; 690 691 /* Now make sure both master & slave are ready */ 692 for (unit = 0; unit < MAX_DRIVES; unit++) { 693 ide_drive_t *drive = &hwif->drives[unit]; 694 695 /* Ignore disks that we will not probe for later. */ 696 if (!drive->noprobe || drive->present) { 697 SELECT_DRIVE(drive); 698 ide_set_irq(drive, 1); 699 mdelay(2); 700 rc = ide_wait_not_busy(hwif, 35000); 701 if (rc) 702 goto out; 703 } else 704 printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n", 705 drive->name); 706 } 707out: 708 /* Exit function with master reselected (let's be sane) */ 709 if (unit) 710 SELECT_DRIVE(&hwif->drives[0]); 711 712 return rc; 713} 714 715/** 716 * ide_undecoded_slave - look for bad CF adapters 717 * @drive1: drive 718 * 719 * Analyse the drives on the interface and attempt to decide if we 720 * have the same drive viewed twice. This occurs with crap CF adapters 721 * and PCMCIA sometimes. 722 */ 723 724void ide_undecoded_slave(ide_drive_t *drive1) 725{ 726 ide_drive_t *drive0 = &drive1->hwif->drives[0]; 727 728 if ((drive1->dn & 1) == 0 || drive0->present == 0) 729 return; 730 731 /* If the models don't match they are not the same product */ 732 if (strcmp(drive0->id->model, drive1->id->model)) 733 return; 734 735 /* Serial numbers do not match */ 736 if (strncmp(drive0->id->serial_no, drive1->id->serial_no, 20)) 737 return; 738 739 /* No serial number, thankfully very rare for CF */ 740 if (drive0->id->serial_no[0] == 0) 741 return; 742 743 /* Appears to be an IDE flash adapter with decode bugs */ 744 printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n"); 745 746 drive1->present = 0; 747} 748 749EXPORT_SYMBOL_GPL(ide_undecoded_slave); 750 751static int ide_probe_port(ide_hwif_t *hwif) 752{ 753 unsigned long flags; 754 unsigned int irqd; 755 int unit, rc = -ENODEV; 756 757 BUG_ON(hwif->present); 758 759 if (hwif->noprobe || 760 (hwif->drives[0].noprobe && hwif->drives[1].noprobe)) 761 return -EACCES; 762 763 /* 764 * We must always disable IRQ, as probe_for_drive will assert IRQ, but 765 * we'll install our IRQ driver much later... 766 */ 767 irqd = hwif->irq; 768 if (irqd) 769 disable_irq(hwif->irq); 770 771 local_irq_set(flags); 772 773 if (ide_port_wait_ready(hwif) == -EBUSY) 774 printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); 775 776 /* 777 * Second drive should only exist if first drive was found, 778 * but a lot of cdrom drives are configured as single slaves. 779 */ 780 for (unit = 0; unit < MAX_DRIVES; ++unit) { 781 ide_drive_t *drive = &hwif->drives[unit]; 782 drive->dn = (hwif->channel ? 2 : 0) + unit; 783 (void) probe_for_drive(drive); 784 if (drive->present) 785 rc = 0; 786 } 787 if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) { 788 printk(KERN_WARNING "%s: reset\n", hwif->name); 789 hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); 790 udelay(10); 791 hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); 792 (void)ide_busy_sleep(hwif); 793 } 794 local_irq_restore(flags); 795 /* 796 * Use cached IRQ number. It might be (and is...) changed by probe 797 * code above 798 */ 799 if (irqd) 800 enable_irq(irqd); 801 802 return rc; 803} 804 805static void ide_port_tune_devices(ide_hwif_t *hwif) 806{ 807 int unit; 808 809 for (unit = 0; unit < MAX_DRIVES; unit++) { 810 ide_drive_t *drive = &hwif->drives[unit]; 811 812 if (drive->present && hwif->quirkproc) 813 hwif->quirkproc(drive); 814 } 815 816 for (unit = 0; unit < MAX_DRIVES; ++unit) { 817 ide_drive_t *drive = &hwif->drives[unit]; 818 819 if (drive->present) { 820 if (drive->autotune == IDE_TUNE_AUTO) 821 ide_set_max_pio(drive); 822 823 if (drive->autotune != IDE_TUNE_DEFAULT && 824 drive->autotune != IDE_TUNE_AUTO) 825 continue; 826 827 drive->nice1 = 1; 828 829 if (hwif->dma_host_set) 830 ide_set_dma(drive); 831 } 832 } 833 834 for (unit = 0; unit < MAX_DRIVES; ++unit) { 835 ide_drive_t *drive = &hwif->drives[unit]; 836 837 if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) 838 drive->no_io_32bit = 1; 839 else 840 drive->no_io_32bit = drive->id->dword_io ? 1 : 0; 841 } 842} 843 844#if MAX_HWIFS > 1 845/* 846 * save_match() is used to simplify logic in init_irq() below. 847 * 848 * A loophole here is that we may not know about a particular 849 * hwif's irq until after that hwif is actually probed/initialized.. 850 * This could be a problem for the case where an hwif is on a 851 * dual interface that requires serialization (eg. cmd640) and another 852 * hwif using one of the same irqs is initialized beforehand. 853 * 854 * This routine detects and reports such situations, but does not fix them. 855 */ 856static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match) 857{ 858 ide_hwif_t *m = *match; 859 860 if (m && m->hwgroup && m->hwgroup != new->hwgroup) { 861 if (!new->hwgroup) 862 return; 863 printk("%s: potential irq problem with %s and %s\n", 864 hwif->name, new->name, m->name); 865 } 866 if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */ 867 *match = new; 868} 869#endif /* MAX_HWIFS > 1 */ 870 871/* 872 * init request queue 873 */ 874static int ide_init_queue(ide_drive_t *drive) 875{ 876 struct request_queue *q; 877 ide_hwif_t *hwif = HWIF(drive); 878 int max_sectors = 256; 879 int max_sg_entries = PRD_ENTRIES; 880 881 /* 882 * Our default set up assumes the normal IDE case, 883 * that is 64K segmenting, standard PRD setup 884 * and LBA28. Some drivers then impose their own 885 * limits and LBA48 we could raise it but as yet 886 * do not. 887 */ 888 889 q = blk_init_queue_node(do_ide_request, &ide_lock, hwif_to_node(hwif)); 890 if (!q) 891 return 1; 892 893 q->queuedata = drive; 894 blk_queue_segment_boundary(q, 0xffff); 895 896 if (hwif->rqsize < max_sectors) 897 max_sectors = hwif->rqsize; 898 blk_queue_max_sectors(q, max_sectors); 899 900#ifdef CONFIG_PCI 901 /* When we have an IOMMU, we may have a problem where pci_map_sg() 902 * creates segments that don't completely match our boundary 903 * requirements and thus need to be broken up again. Because it 904 * doesn't align properly either, we may actually have to break up 905 * to more segments than what was we got in the first place, a max 906 * worst case is twice as many. 907 * This will be fixed once we teach pci_map_sg() about our boundary 908 * requirements, hopefully soon. *FIXME* 909 */ 910 if (!PCI_DMA_BUS_IS_PHYS) 911 max_sg_entries >>= 1; 912#endif /* CONFIG_PCI */ 913 914 blk_queue_max_hw_segments(q, max_sg_entries); 915 blk_queue_max_phys_segments(q, max_sg_entries); 916 917 /* assign drive queue */ 918 drive->queue = q; 919 920 /* needs drive->queue to be set */ 921 ide_toggle_bounce(drive, 1); 922 923 return 0; 924} 925 926static void ide_add_drive_to_hwgroup(ide_drive_t *drive) 927{ 928 ide_hwgroup_t *hwgroup = drive->hwif->hwgroup; 929 930 spin_lock_irq(&ide_lock); 931 if (!hwgroup->drive) { 932 /* first drive for hwgroup. */ 933 drive->next = drive; 934 hwgroup->drive = drive; 935 hwgroup->hwif = HWIF(hwgroup->drive); 936 } else { 937 drive->next = hwgroup->drive->next; 938 hwgroup->drive->next = drive; 939 } 940 spin_unlock_irq(&ide_lock); 941} 942 943/* 944 * For any present drive: 945 * - allocate the block device queue 946 * - link drive into the hwgroup 947 */ 948static void ide_port_setup_devices(ide_hwif_t *hwif) 949{ 950 int i; 951 952 for (i = 0; i < MAX_DRIVES; i++) { 953 ide_drive_t *drive = &hwif->drives[i]; 954 955 if (!drive->present) 956 continue; 957 958 if (ide_init_queue(drive)) { 959 printk(KERN_ERR "ide: failed to init %s\n", 960 drive->name); 961 continue; 962 } 963 964 ide_add_drive_to_hwgroup(drive); 965 } 966} 967 968/* 969 * This routine sets up the irq for an ide interface, and creates a new 970 * hwgroup for the irq/hwif if none was previously assigned. 971 * 972 * Much of the code is for correctly detecting/handling irq sharing 973 * and irq serialization situations. This is somewhat complex because 974 * it handles static as well as dynamic (PCMCIA) IDE interfaces. 975 */ 976static int init_irq (ide_hwif_t *hwif) 977{ 978 unsigned int index; 979 ide_hwgroup_t *hwgroup; 980 ide_hwif_t *match = NULL; 981 982 983 BUG_ON(in_interrupt()); 984 BUG_ON(irqs_disabled()); 985 BUG_ON(hwif == NULL); 986 987 mutex_lock(&ide_cfg_mtx); 988 hwif->hwgroup = NULL; 989#if MAX_HWIFS > 1 990 /* 991 * Group up with any other hwifs that share our irq(s). 992 */ 993 for (index = 0; index < MAX_HWIFS; index++) { 994 ide_hwif_t *h = &ide_hwifs[index]; 995 if (h->hwgroup) { /* scan only initialized hwif's */ 996 if (hwif->irq == h->irq) { 997 hwif->sharing_irq = h->sharing_irq = 1; 998 if (hwif->chipset != ide_pci || 999 h->chipset != ide_pci) { 1000 save_match(hwif, h, &match); 1001 } 1002 } 1003 if (hwif->serialized) { 1004 if (hwif->mate && hwif->mate->irq == h->irq) 1005 save_match(hwif, h, &match); 1006 } 1007 if (h->serialized) { 1008 if (h->mate && hwif->irq == h->mate->irq) 1009 save_match(hwif, h, &match); 1010 } 1011 } 1012 } 1013#endif /* MAX_HWIFS > 1 */ 1014 /* 1015 * If we are still without a hwgroup, then form a new one 1016 */ 1017 if (match) { 1018 hwgroup = match->hwgroup; 1019 hwif->hwgroup = hwgroup; 1020 /* 1021 * Link us into the hwgroup. 1022 * This must be done early, do ensure that unexpected_intr 1023 * can find the hwif and prevent irq storms. 1024 * No drives are attached to the new hwif, choose_drive 1025 * can't do anything stupid (yet). 1026 * Add ourself as the 2nd entry to the hwgroup->hwif 1027 * linked list, the first entry is the hwif that owns 1028 * hwgroup->handler - do not change that. 1029 */ 1030 spin_lock_irq(&ide_lock); 1031 hwif->next = hwgroup->hwif->next; 1032 hwgroup->hwif->next = hwif; 1033 BUG_ON(hwif->next == hwif); 1034 spin_unlock_irq(&ide_lock); 1035 } else { 1036 hwgroup = kmalloc_node(sizeof(*hwgroup), GFP_KERNEL|__GFP_ZERO, 1037 hwif_to_node(hwif)); 1038 if (hwgroup == NULL) 1039 goto out_up; 1040 1041 hwif->hwgroup = hwgroup; 1042 hwgroup->hwif = hwif->next = hwif; 1043 1044 init_timer(&hwgroup->timer); 1045 hwgroup->timer.function = &ide_timer_expiry; 1046 hwgroup->timer.data = (unsigned long) hwgroup; 1047 } 1048 1049 /* 1050 * Allocate the irq, if not already obtained for another hwif 1051 */ 1052 if (!match || match->irq != hwif->irq) { 1053 int sa = 0; 1054#if defined(__mc68000__) 1055 sa = IRQF_SHARED; 1056#endif /* __mc68000__ */ 1057 1058 if (IDE_CHIPSET_IS_PCI(hwif->chipset)) 1059 sa = IRQF_SHARED; 1060 1061 if (hwif->io_ports[IDE_CONTROL_OFFSET]) 1062 /* clear nIEN */ 1063 hwif->OUTB(0x08, hwif->io_ports[IDE_CONTROL_OFFSET]); 1064 1065 if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup)) 1066 goto out_unlink; 1067 } 1068 1069 if (!hwif->rqsize) { 1070 if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || 1071 (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) 1072 hwif->rqsize = 256; 1073 else 1074 hwif->rqsize = 65536; 1075 } 1076 1077#if !defined(__mc68000__) 1078 printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, 1079 hwif->io_ports[IDE_DATA_OFFSET], 1080 hwif->io_ports[IDE_DATA_OFFSET]+7, 1081 hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq); 1082#else 1083 printk("%s at 0x%08lx on irq %d", hwif->name, 1084 hwif->io_ports[IDE_DATA_OFFSET], hwif->irq); 1085#endif /* __mc68000__ */ 1086 if (match) 1087 printk(" (%sed with %s)", 1088 hwif->sharing_irq ? "shar" : "serializ", match->name); 1089 printk("\n"); 1090 1091 ide_port_setup_devices(hwif); 1092 1093 mutex_unlock(&ide_cfg_mtx); 1094 return 0; 1095out_unlink: 1096 ide_remove_port_from_hwgroup(hwif); 1097out_up: 1098 mutex_unlock(&ide_cfg_mtx); 1099 return 1; 1100} 1101 1102static int ata_lock(dev_t dev, void *data) 1103{ 1104 /* FIXME: we want to pin hwif down */ 1105 return 0; 1106} 1107 1108static struct kobject *ata_probe(dev_t dev, int *part, void *data) 1109{ 1110 ide_hwif_t *hwif = data; 1111 int unit = *part >> PARTN_BITS; 1112 ide_drive_t *drive = &hwif->drives[unit]; 1113 if (!drive->present) 1114 return NULL; 1115 1116 if (drive->media == ide_disk) 1117 request_module("ide-disk"); 1118 if (drive->scsi) 1119 request_module("ide-scsi"); 1120 if (drive->media == ide_cdrom || drive->media == ide_optical) 1121 request_module("ide-cd"); 1122 if (drive->media == ide_tape) 1123 request_module("ide-tape"); 1124 if (drive->media == ide_floppy) 1125 request_module("ide-floppy"); 1126 1127 return NULL; 1128} 1129 1130static struct kobject *exact_match(dev_t dev, int *part, void *data) 1131{ 1132 struct gendisk *p = data; 1133 *part &= (1 << PARTN_BITS) - 1; 1134 return &p->dev.kobj; 1135} 1136 1137static int exact_lock(dev_t dev, void *data) 1138{ 1139 struct gendisk *p = data; 1140 1141 if (!get_disk(p)) 1142 return -1; 1143 return 0; 1144} 1145 1146void ide_register_region(struct gendisk *disk) 1147{ 1148 blk_register_region(MKDEV(disk->major, disk->first_minor), 1149 disk->minors, NULL, exact_match, exact_lock, disk); 1150} 1151 1152EXPORT_SYMBOL_GPL(ide_register_region); 1153 1154void ide_unregister_region(struct gendisk *disk) 1155{ 1156 blk_unregister_region(MKDEV(disk->major, disk->first_minor), 1157 disk->minors); 1158} 1159 1160EXPORT_SYMBOL_GPL(ide_unregister_region); 1161 1162void ide_init_disk(struct gendisk *disk, ide_drive_t *drive) 1163{ 1164 ide_hwif_t *hwif = drive->hwif; 1165 unsigned int unit = (drive->select.all >> 4) & 1; 1166 1167 disk->major = hwif->major; 1168 disk->first_minor = unit << PARTN_BITS; 1169 sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit); 1170 disk->queue = drive->queue; 1171} 1172 1173EXPORT_SYMBOL_GPL(ide_init_disk); 1174 1175static void ide_remove_drive_from_hwgroup(ide_drive_t *drive) 1176{ 1177 ide_hwgroup_t *hwgroup = drive->hwif->hwgroup; 1178 1179 if (drive == drive->next) { 1180 /* special case: last drive from hwgroup. */ 1181 BUG_ON(hwgroup->drive != drive); 1182 hwgroup->drive = NULL; 1183 } else { 1184 ide_drive_t *walk; 1185 1186 walk = hwgroup->drive; 1187 while (walk->next != drive) 1188 walk = walk->next; 1189 walk->next = drive->next; 1190 if (hwgroup->drive == drive) { 1191 hwgroup->drive = drive->next; 1192 hwgroup->hwif = hwgroup->drive->hwif; 1193 } 1194 } 1195 BUG_ON(hwgroup->drive == drive); 1196} 1197 1198static void drive_release_dev (struct device *dev) 1199{ 1200 ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); 1201 1202 spin_lock_irq(&ide_lock); 1203 ide_remove_drive_from_hwgroup(drive); 1204 kfree(drive->id); 1205 drive->id = NULL; 1206 drive->present = 0; 1207 /* Messed up locking ... */ 1208 spin_unlock_irq(&ide_lock); 1209 blk_cleanup_queue(drive->queue); 1210 spin_lock_irq(&ide_lock); 1211 drive->queue = NULL; 1212 spin_unlock_irq(&ide_lock); 1213 1214 complete(&drive->gendev_rel_comp); 1215} 1216 1217static int hwif_init(ide_hwif_t *hwif) 1218{ 1219 int old_irq; 1220 1221 if (!hwif->irq) { 1222 if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]))) 1223 { 1224 printk("%s: DISABLED, NO IRQ\n", hwif->name); 1225 return 0; 1226 } 1227 } 1228#ifdef CONFIG_BLK_DEV_HD 1229 if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) { 1230 printk("%s: CANNOT SHARE IRQ WITH OLD " 1231 "HARDDISK DRIVER (hd.c)\n", hwif->name); 1232 return 0; 1233 } 1234#endif /* CONFIG_BLK_DEV_HD */ 1235 1236 if (register_blkdev(hwif->major, hwif->name)) 1237 return 0; 1238 1239 if (!hwif->sg_max_nents) 1240 hwif->sg_max_nents = PRD_ENTRIES; 1241 1242 hwif->sg_table = kmalloc(sizeof(struct scatterlist)*hwif->sg_max_nents, 1243 GFP_KERNEL); 1244 if (!hwif->sg_table) { 1245 printk(KERN_ERR "%s: unable to allocate SG table.\n", hwif->name); 1246 goto out; 1247 } 1248 1249 sg_init_table(hwif->sg_table, hwif->sg_max_nents); 1250 1251 if (init_irq(hwif) == 0) 1252 goto done; 1253 1254 old_irq = hwif->irq; 1255 /* 1256 * It failed to initialise. Find the default IRQ for 1257 * this port and try that. 1258 */ 1259 if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]))) { 1260 printk("%s: Disabled unable to get IRQ %d.\n", 1261 hwif->name, old_irq); 1262 goto out; 1263 } 1264 if (init_irq(hwif)) { 1265 printk("%s: probed IRQ %d and default IRQ %d failed.\n", 1266 hwif->name, old_irq, hwif->irq); 1267 goto out; 1268 } 1269 printk("%s: probed IRQ %d failed, using default.\n", 1270 hwif->name, hwif->irq); 1271 1272done: 1273 blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, 1274 THIS_MODULE, ata_probe, ata_lock, hwif); 1275 return 1; 1276 1277out: 1278 unregister_blkdev(hwif->major, hwif->name); 1279 return 0; 1280} 1281 1282static void hwif_register_devices(ide_hwif_t *hwif) 1283{ 1284 unsigned int i; 1285 1286 for (i = 0; i < MAX_DRIVES; i++) { 1287 ide_drive_t *drive = &hwif->drives[i]; 1288 struct device *dev = &drive->gendev; 1289 int ret; 1290 1291 if (!drive->present) 1292 continue; 1293 1294 ide_add_generic_settings(drive); 1295 1296 snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i); 1297 dev->parent = &hwif->gendev; 1298 dev->bus = &ide_bus_type; 1299 dev->driver_data = drive; 1300 dev->release = drive_release_dev; 1301 1302 ret = device_register(dev); 1303 if (ret < 0) 1304 printk(KERN_WARNING "IDE: %s: device_register error: " 1305 "%d\n", __func__, ret); 1306 } 1307} 1308 1309static void ide_port_init_devices(ide_hwif_t *hwif) 1310{ 1311 int i; 1312 1313 for (i = 0; i < MAX_DRIVES; i++) { 1314 ide_drive_t *drive = &hwif->drives[i]; 1315 1316 if (hwif->host_flags & IDE_HFLAG_IO_32BIT) 1317 drive->io_32bit = 1; 1318 if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) 1319 drive->unmask = 1; 1320 if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) 1321 drive->no_unmask = 1; 1322 if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) 1323 drive->autotune = 1; 1324 } 1325 1326 if (hwif->port_init_devs) 1327 hwif->port_init_devs(hwif); 1328} 1329 1330static void ide_init_port(ide_hwif_t *hwif, unsigned int port, 1331 const struct ide_port_info *d) 1332{ 1333 if (d->chipset != ide_etrax100) 1334 hwif->channel = port; 1335 1336 if (d->chipset) 1337 hwif->chipset = d->chipset; 1338 1339 if (d->init_iops) 1340 d->init_iops(hwif); 1341 1342 if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) 1343 ide_hwif_setup_dma(hwif, d); 1344 1345 if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || 1346 (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) 1347 hwif->irq = port ? 15 : 14; 1348 1349 hwif->host_flags = d->host_flags; 1350 hwif->pio_mask = d->pio_mask; 1351 1352 if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) 1353 hwif->mate->serialized = hwif->serialized = 1; 1354 1355 hwif->swdma_mask = d->swdma_mask; 1356 hwif->mwdma_mask = d->mwdma_mask; 1357 hwif->ultra_mask = d->udma_mask; 1358 1359 /* reset DMA masks only for SFF-style DMA controllers */ 1360 if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) 1361 hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; 1362 1363 if (d->host_flags & IDE_HFLAG_RQSIZE_256) 1364 hwif->rqsize = 256; 1365 1366 /* call chipset specific routine for each enabled port */ 1367 if (d->init_hwif) 1368 d->init_hwif(hwif); 1369 1370 if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) { 1371 if (hwif->cbl != ATA_CBL_PATA40_SHORT) 1372 hwif->cbl = hwif->cable_detect(hwif); 1373 } 1374} 1375 1376int ide_device_add_all(u8 *idx, const struct ide_port_info *d) 1377{ 1378 ide_hwif_t *hwif, *mate = NULL; 1379 int i, rc = 0; 1380 1381 for (i = 0; i < MAX_HWIFS; i++) { 1382 if (d == NULL || idx[i] == 0xff) { 1383 mate = NULL; 1384 continue; 1385 } 1386 1387 hwif = &ide_hwifs[idx[i]]; 1388 1389 if (d->chipset != ide_etrax100 && (i & 1) && mate) { 1390 hwif->mate = mate; 1391 mate->mate = hwif; 1392 } 1393 1394 mate = (i & 1) ? NULL : hwif; 1395 1396 ide_init_port(hwif, i & 1, d); 1397 ide_port_init_devices(hwif); 1398 } 1399 1400 for (i = 0; i < MAX_HWIFS; i++) { 1401 if (idx[i] == 0xff) 1402 continue; 1403 1404 hwif = &ide_hwifs[idx[i]]; 1405 1406 if ((hwif->chipset != ide_4drives || !hwif->mate || 1407 !hwif->mate->present) && ide_hwif_request_regions(hwif)) { 1408 printk(KERN_ERR "%s: ports already in use, " 1409 "skipping probe\n", hwif->name); 1410 continue; 1411 } 1412 1413 if (ide_probe_port(hwif) < 0) { 1414 ide_hwif_release_regions(hwif); 1415 continue; 1416 } 1417 1418 hwif->present = 1; 1419 1420 if (hwif->chipset != ide_4drives || !hwif->mate || 1421 !hwif->mate->present) 1422 ide_register_port(hwif); 1423 1424 ide_port_tune_devices(hwif); 1425 } 1426 1427 for (i = 0; i < MAX_HWIFS; i++) { 1428 if (idx[i] == 0xff) 1429 continue; 1430 1431 hwif = &ide_hwifs[idx[i]]; 1432 1433 if (!hwif->present) 1434 continue; 1435 1436 if (hwif_init(hwif) == 0) { 1437 printk(KERN_INFO "%s: failed to initialize IDE " 1438 "interface\n", hwif->name); 1439 hwif->present = 0; 1440 rc = -1; 1441 continue; 1442 } 1443 1444 ide_acpi_init(hwif); 1445 ide_acpi_port_init_devices(hwif); 1446 } 1447 1448 for (i = 0; i < MAX_HWIFS; i++) { 1449 if (idx[i] == 0xff) 1450 continue; 1451 1452 hwif = &ide_hwifs[idx[i]]; 1453 1454 if (hwif->present) { 1455 if (hwif->chipset == ide_unknown || 1456 hwif->chipset == ide_forced) 1457 hwif->chipset = ide_generic; 1458 hwif_register_devices(hwif); 1459 } 1460 } 1461 1462 for (i = 0; i < MAX_HWIFS; i++) { 1463 if (idx[i] == 0xff) 1464 continue; 1465 1466 hwif = &ide_hwifs[idx[i]]; 1467 1468 if (hwif->present) { 1469 ide_proc_register_port(hwif); 1470 ide_proc_port_register_devices(hwif); 1471 } 1472 } 1473 1474 return rc; 1475} 1476EXPORT_SYMBOL_GPL(ide_device_add_all); 1477 1478int ide_device_add(u8 idx[4], const struct ide_port_info *d) 1479{ 1480 u8 idx_all[MAX_HWIFS]; 1481 int i; 1482 1483 for (i = 0; i < MAX_HWIFS; i++) 1484 idx_all[i] = (i < 4) ? idx[i] : 0xff; 1485 1486 return ide_device_add_all(idx_all, d); 1487} 1488EXPORT_SYMBOL_GPL(ide_device_add); 1489