scc_pata.c revision 898ec223fea2a2df88035e58dbf50f493577e225
1/* 2 * Support for IDE interfaces on Celleb platform 3 * 4 * (C) Copyright 2006 TOSHIBA CORPORATION 5 * 6 * This code is based on drivers/ide/pci/siimage.c: 7 * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> 8 * Copyright (C) 2003 Red Hat 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, write to the Free Software Foundation, Inc., 22 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. 23 */ 24 25#include <linux/types.h> 26#include <linux/module.h> 27#include <linux/pci.h> 28#include <linux/delay.h> 29#include <linux/ide.h> 30#include <linux/init.h> 31 32#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 33 34#define SCC_PATA_NAME "scc IDE" 35 36#define TDVHSEL_MASTER 0x00000001 37#define TDVHSEL_SLAVE 0x00000004 38 39#define MODE_JCUSFEN 0x00000080 40 41#define CCKCTRL_ATARESET 0x00040000 42#define CCKCTRL_BUFCNT 0x00020000 43#define CCKCTRL_CRST 0x00010000 44#define CCKCTRL_OCLKEN 0x00000100 45#define CCKCTRL_ATACLKOEN 0x00000002 46#define CCKCTRL_LCLKEN 0x00000001 47 48#define QCHCD_IOS_SS 0x00000001 49 50#define QCHSD_STPDIAG 0x00020000 51 52#define INTMASK_MSK 0xD1000012 53#define INTSTS_SERROR 0x80000000 54#define INTSTS_PRERR 0x40000000 55#define INTSTS_RERR 0x10000000 56#define INTSTS_ICERR 0x01000000 57#define INTSTS_BMSINT 0x00000010 58#define INTSTS_BMHE 0x00000008 59#define INTSTS_IOIRQS 0x00000004 60#define INTSTS_INTRQ 0x00000002 61#define INTSTS_ACTEINT 0x00000001 62 63#define ECMODE_VALUE 0x01 64 65static struct scc_ports { 66 unsigned long ctl, dma; 67 struct ide_host *host; /* for removing port from system */ 68} scc_ports[MAX_HWIFS]; 69 70/* PIO transfer mode table */ 71/* JCHST */ 72static unsigned long JCHSTtbl[2][7] = { 73 {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ 74 {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ 75}; 76 77/* JCHHT */ 78static unsigned long JCHHTtbl[2][7] = { 79 {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ 80 {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ 81}; 82 83/* JCHCT */ 84static unsigned long JCHCTtbl[2][7] = { 85 {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ 86 {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ 87}; 88 89 90/* DMA transfer mode table */ 91/* JCHDCTM/JCHDCTS */ 92static unsigned long JCHDCTxtbl[2][7] = { 93 {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ 94 {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ 95}; 96 97/* JCSTWTM/JCSTWTS */ 98static unsigned long JCSTWTxtbl[2][7] = { 99 {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ 100 {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ 101}; 102 103/* JCTSS */ 104static unsigned long JCTSStbl[2][7] = { 105 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ 106 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ 107}; 108 109/* JCENVT */ 110static unsigned long JCENVTtbl[2][7] = { 111 {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ 112 {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ 113}; 114 115/* JCACTSELS/JCACTSELM */ 116static unsigned long JCACTSELtbl[2][7] = { 117 {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ 118 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ 119}; 120 121 122static u8 scc_ide_inb(unsigned long port) 123{ 124 u32 data = in_be32((void*)port); 125 return (u8)data; 126} 127 128static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) 129{ 130 out_be32((void *)hwif->io_ports.command_addr, cmd); 131 eieio(); 132 in_be32((void *)(hwif->dma_base + 0x01c)); 133 eieio(); 134} 135 136static u8 scc_read_status(ide_hwif_t *hwif) 137{ 138 return (u8)in_be32((void *)hwif->io_ports.status_addr); 139} 140 141static u8 scc_read_altstatus(ide_hwif_t *hwif) 142{ 143 return (u8)in_be32((void *)hwif->io_ports.ctl_addr); 144} 145 146static u8 scc_read_sff_dma_status(ide_hwif_t *hwif) 147{ 148 return (u8)in_be32((void *)(hwif->dma_base + 4)); 149} 150 151static void scc_set_irq(ide_hwif_t *hwif, int on) 152{ 153 u8 ctl = ATA_DEVCTL_OBS; 154 155 if (on == 4) { /* hack for SRST */ 156 ctl |= 4; 157 on &= ~4; 158 } 159 160 ctl |= on ? 0 : 2; 161 162 out_be32((void *)hwif->io_ports.ctl_addr, ctl); 163 eieio(); 164 in_be32((void *)(hwif->dma_base + 0x01c)); 165 eieio(); 166} 167 168static void scc_ide_insw(unsigned long port, void *addr, u32 count) 169{ 170 u16 *ptr = (u16 *)addr; 171 while (count--) { 172 *ptr++ = le16_to_cpu(in_be32((void*)port)); 173 } 174} 175 176static void scc_ide_insl(unsigned long port, void *addr, u32 count) 177{ 178 u16 *ptr = (u16 *)addr; 179 while (count--) { 180 *ptr++ = le16_to_cpu(in_be32((void*)port)); 181 *ptr++ = le16_to_cpu(in_be32((void*)port)); 182 } 183} 184 185static void scc_ide_outb(u8 addr, unsigned long port) 186{ 187 out_be32((void*)port, addr); 188} 189 190static void 191scc_ide_outsw(unsigned long port, void *addr, u32 count) 192{ 193 u16 *ptr = (u16 *)addr; 194 while (count--) { 195 out_be32((void*)port, cpu_to_le16(*ptr++)); 196 } 197} 198 199static void 200scc_ide_outsl(unsigned long port, void *addr, u32 count) 201{ 202 u16 *ptr = (u16 *)addr; 203 while (count--) { 204 out_be32((void*)port, cpu_to_le16(*ptr++)); 205 out_be32((void*)port, cpu_to_le16(*ptr++)); 206 } 207} 208 209/** 210 * scc_set_pio_mode - set host controller for PIO mode 211 * @drive: drive 212 * @pio: PIO mode number 213 * 214 * Load the timing settings for this device mode into the 215 * controller. 216 */ 217 218static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) 219{ 220 ide_hwif_t *hwif = drive->hwif; 221 struct scc_ports *ports = ide_get_hwifdata(hwif); 222 unsigned long ctl_base = ports->ctl; 223 unsigned long cckctrl_port = ctl_base + 0xff0; 224 unsigned long piosht_port = ctl_base + 0x000; 225 unsigned long pioct_port = ctl_base + 0x004; 226 unsigned long reg; 227 int offset; 228 229 reg = in_be32((void __iomem *)cckctrl_port); 230 if (reg & CCKCTRL_ATACLKOEN) { 231 offset = 1; /* 133MHz */ 232 } else { 233 offset = 0; /* 100MHz */ 234 } 235 reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; 236 out_be32((void __iomem *)piosht_port, reg); 237 reg = JCHCTtbl[offset][pio]; 238 out_be32((void __iomem *)pioct_port, reg); 239} 240 241/** 242 * scc_set_dma_mode - set host controller for DMA mode 243 * @drive: drive 244 * @speed: DMA mode 245 * 246 * Load the timing settings for this device mode into the 247 * controller. 248 */ 249 250static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) 251{ 252 ide_hwif_t *hwif = drive->hwif; 253 struct scc_ports *ports = ide_get_hwifdata(hwif); 254 unsigned long ctl_base = ports->ctl; 255 unsigned long cckctrl_port = ctl_base + 0xff0; 256 unsigned long mdmact_port = ctl_base + 0x008; 257 unsigned long mcrcst_port = ctl_base + 0x00c; 258 unsigned long sdmact_port = ctl_base + 0x010; 259 unsigned long scrcst_port = ctl_base + 0x014; 260 unsigned long udenvt_port = ctl_base + 0x018; 261 unsigned long tdvhsel_port = ctl_base + 0x020; 262 int is_slave = (&hwif->drives[1] == drive); 263 int offset, idx; 264 unsigned long reg; 265 unsigned long jcactsel; 266 267 reg = in_be32((void __iomem *)cckctrl_port); 268 if (reg & CCKCTRL_ATACLKOEN) { 269 offset = 1; /* 133MHz */ 270 } else { 271 offset = 0; /* 100MHz */ 272 } 273 274 idx = speed - XFER_UDMA_0; 275 276 jcactsel = JCACTSELtbl[offset][idx]; 277 if (is_slave) { 278 out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); 279 out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); 280 jcactsel = jcactsel << 2; 281 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); 282 } else { 283 out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); 284 out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); 285 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); 286 } 287 reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; 288 out_be32((void __iomem *)udenvt_port, reg); 289} 290 291static void scc_dma_host_set(ide_drive_t *drive, int on) 292{ 293 ide_hwif_t *hwif = drive->hwif; 294 u8 unit = drive->dn & 1; 295 u8 dma_stat = scc_ide_inb(hwif->dma_base + 4); 296 297 if (on) 298 dma_stat |= (1 << (5 + unit)); 299 else 300 dma_stat &= ~(1 << (5 + unit)); 301 302 scc_ide_outb(dma_stat, hwif->dma_base + 4); 303} 304 305/** 306 * scc_ide_dma_setup - begin a DMA phase 307 * @drive: target device 308 * 309 * Build an IDE DMA PRD (IDE speak for scatter gather table) 310 * and then set up the DMA transfer registers. 311 * 312 * Returns 0 on success. If a PIO fallback is required then 1 313 * is returned. 314 */ 315 316static int scc_dma_setup(ide_drive_t *drive) 317{ 318 ide_hwif_t *hwif = drive->hwif; 319 struct request *rq = hwif->rq; 320 unsigned int reading; 321 u8 dma_stat; 322 323 if (rq_data_dir(rq)) 324 reading = 0; 325 else 326 reading = 1 << 3; 327 328 /* fall back to pio! */ 329 if (!ide_build_dmatable(drive, rq)) { 330 ide_map_sg(drive, rq); 331 return 1; 332 } 333 334 /* PRD table */ 335 out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); 336 337 /* specify r/w */ 338 out_be32((void __iomem *)hwif->dma_base, reading); 339 340 /* read DMA status for INTR & ERROR flags */ 341 dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4)); 342 343 /* clear INTR & ERROR flags */ 344 out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); 345 drive->waiting_for_dma = 1; 346 return 0; 347} 348 349static void scc_dma_start(ide_drive_t *drive) 350{ 351 ide_hwif_t *hwif = drive->hwif; 352 u8 dma_cmd = scc_ide_inb(hwif->dma_base); 353 354 /* start DMA */ 355 scc_ide_outb(dma_cmd | 1, hwif->dma_base); 356 wmb(); 357} 358 359static int __scc_dma_end(ide_drive_t *drive) 360{ 361 ide_hwif_t *hwif = drive->hwif; 362 u8 dma_stat, dma_cmd; 363 364 drive->waiting_for_dma = 0; 365 /* get DMA command mode */ 366 dma_cmd = scc_ide_inb(hwif->dma_base); 367 /* stop DMA */ 368 scc_ide_outb(dma_cmd & ~1, hwif->dma_base); 369 /* get DMA status */ 370 dma_stat = scc_ide_inb(hwif->dma_base + 4); 371 /* clear the INTR & ERROR bits */ 372 scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); 373 /* purge DMA mappings */ 374 ide_destroy_dmatable(drive); 375 /* verify good DMA status */ 376 wmb(); 377 return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; 378} 379 380/** 381 * scc_dma_end - Stop DMA 382 * @drive: IDE drive 383 * 384 * Check and clear INT Status register. 385 * Then call __scc_dma_end(). 386 */ 387 388static int scc_dma_end(ide_drive_t *drive) 389{ 390 ide_hwif_t *hwif = drive->hwif; 391 void __iomem *dma_base = (void __iomem *)hwif->dma_base; 392 unsigned long intsts_port = hwif->dma_base + 0x014; 393 u32 reg; 394 int dma_stat, data_loss = 0; 395 static int retry = 0; 396 397 /* errata A308 workaround: Step5 (check data loss) */ 398 /* We don't check non ide_disk because it is limited to UDMA4 */ 399 if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) 400 & ATA_ERR) && 401 drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { 402 reg = in_be32((void __iomem *)intsts_port); 403 if (!(reg & INTSTS_ACTEINT)) { 404 printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", 405 drive->name); 406 data_loss = 1; 407 if (retry++) { 408 struct request *rq = hwif->rq; 409 int unit; 410 /* ERROR_RESET and drive->crc_count are needed 411 * to reduce DMA transfer mode in retry process. 412 */ 413 if (rq) 414 rq->errors |= ERROR_RESET; 415 for (unit = 0; unit < MAX_DRIVES; unit++) { 416 ide_drive_t *drive = &hwif->drives[unit]; 417 drive->crc_count++; 418 } 419 } 420 } 421 } 422 423 while (1) { 424 reg = in_be32((void __iomem *)intsts_port); 425 426 if (reg & INTSTS_SERROR) { 427 printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); 428 out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); 429 430 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 431 continue; 432 } 433 434 if (reg & INTSTS_PRERR) { 435 u32 maea0, maec0; 436 unsigned long ctl_base = hwif->config_data; 437 438 maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); 439 maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); 440 441 printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); 442 443 out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); 444 445 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 446 continue; 447 } 448 449 if (reg & INTSTS_RERR) { 450 printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); 451 out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); 452 453 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 454 continue; 455 } 456 457 if (reg & INTSTS_ICERR) { 458 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 459 460 printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); 461 out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); 462 continue; 463 } 464 465 if (reg & INTSTS_BMSINT) { 466 printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); 467 out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); 468 469 ide_do_reset(drive); 470 continue; 471 } 472 473 if (reg & INTSTS_BMHE) { 474 out_be32((void __iomem *)intsts_port, INTSTS_BMHE); 475 continue; 476 } 477 478 if (reg & INTSTS_ACTEINT) { 479 out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); 480 continue; 481 } 482 483 if (reg & INTSTS_IOIRQS) { 484 out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); 485 continue; 486 } 487 break; 488 } 489 490 dma_stat = __scc_dma_end(drive); 491 if (data_loss) 492 dma_stat |= 2; /* emulate DMA error (to retry command) */ 493 return dma_stat; 494} 495 496/* returns 1 if dma irq issued, 0 otherwise */ 497static int scc_dma_test_irq(ide_drive_t *drive) 498{ 499 ide_hwif_t *hwif = drive->hwif; 500 u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); 501 502 /* SCC errata A252,A308 workaround: Step4 */ 503 if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) 504 & ATA_ERR) && 505 (int_stat & INTSTS_INTRQ)) 506 return 1; 507 508 /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ 509 if (int_stat & INTSTS_IOIRQS) 510 return 1; 511 512 return 0; 513} 514 515static u8 scc_udma_filter(ide_drive_t *drive) 516{ 517 ide_hwif_t *hwif = drive->hwif; 518 u8 mask = hwif->ultra_mask; 519 520 /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ 521 if ((drive->media != ide_disk) && (mask & 0xE0)) { 522 printk(KERN_INFO "%s: limit %s to UDMA4\n", 523 SCC_PATA_NAME, drive->name); 524 mask = ATA_UDMA4; 525 } 526 527 return mask; 528} 529 530/** 531 * setup_mmio_scc - map CTRL/BMID region 532 * @dev: PCI device we are configuring 533 * @name: device name 534 * 535 */ 536 537static int setup_mmio_scc (struct pci_dev *dev, const char *name) 538{ 539 void __iomem *ctl_addr; 540 void __iomem *dma_addr; 541 int i, ret; 542 543 for (i = 0; i < MAX_HWIFS; i++) { 544 if (scc_ports[i].ctl == 0) 545 break; 546 } 547 if (i >= MAX_HWIFS) 548 return -ENOMEM; 549 550 ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); 551 if (ret < 0) { 552 printk(KERN_ERR "%s: can't reserve resources\n", name); 553 return ret; 554 } 555 556 ctl_addr = pci_ioremap_bar(dev, 0); 557 if (!ctl_addr) 558 goto fail_0; 559 560 dma_addr = pci_ioremap_bar(dev, 1); 561 if (!dma_addr) 562 goto fail_1; 563 564 pci_set_master(dev); 565 scc_ports[i].ctl = (unsigned long)ctl_addr; 566 scc_ports[i].dma = (unsigned long)dma_addr; 567 pci_set_drvdata(dev, (void *) &scc_ports[i]); 568 569 return 1; 570 571 fail_1: 572 iounmap(ctl_addr); 573 fail_0: 574 return -ENOMEM; 575} 576 577static int scc_ide_setup_pci_device(struct pci_dev *dev, 578 const struct ide_port_info *d) 579{ 580 struct scc_ports *ports = pci_get_drvdata(dev); 581 struct ide_host *host; 582 hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; 583 int i, rc; 584 585 memset(&hw, 0, sizeof(hw)); 586 for (i = 0; i <= 8; i++) 587 hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; 588 hw.irq = dev->irq; 589 hw.dev = &dev->dev; 590 hw.chipset = ide_pci; 591 592 rc = ide_host_add(d, hws, &host); 593 if (rc) 594 return rc; 595 596 ports->host = host; 597 598 return 0; 599} 600 601/** 602 * init_setup_scc - set up an SCC PATA Controller 603 * @dev: PCI device 604 * @d: IDE port info 605 * 606 * Perform the initial set up for this device. 607 */ 608 609static int __devinit init_setup_scc(struct pci_dev *dev, 610 const struct ide_port_info *d) 611{ 612 unsigned long ctl_base; 613 unsigned long dma_base; 614 unsigned long cckctrl_port; 615 unsigned long intmask_port; 616 unsigned long mode_port; 617 unsigned long ecmode_port; 618 u32 reg = 0; 619 struct scc_ports *ports; 620 int rc; 621 622 rc = pci_enable_device(dev); 623 if (rc) 624 goto end; 625 626 rc = setup_mmio_scc(dev, d->name); 627 if (rc < 0) 628 goto end; 629 630 ports = pci_get_drvdata(dev); 631 ctl_base = ports->ctl; 632 dma_base = ports->dma; 633 cckctrl_port = ctl_base + 0xff0; 634 intmask_port = dma_base + 0x010; 635 mode_port = ctl_base + 0x024; 636 ecmode_port = ctl_base + 0xf00; 637 638 /* controller initialization */ 639 reg = 0; 640 out_be32((void*)cckctrl_port, reg); 641 reg |= CCKCTRL_ATACLKOEN; 642 out_be32((void*)cckctrl_port, reg); 643 reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; 644 out_be32((void*)cckctrl_port, reg); 645 reg |= CCKCTRL_CRST; 646 out_be32((void*)cckctrl_port, reg); 647 648 for (;;) { 649 reg = in_be32((void*)cckctrl_port); 650 if (reg & CCKCTRL_CRST) 651 break; 652 udelay(5000); 653 } 654 655 reg |= CCKCTRL_ATARESET; 656 out_be32((void*)cckctrl_port, reg); 657 658 out_be32((void*)ecmode_port, ECMODE_VALUE); 659 out_be32((void*)mode_port, MODE_JCUSFEN); 660 out_be32((void*)intmask_port, INTMASK_MSK); 661 662 rc = scc_ide_setup_pci_device(dev, d); 663 664 end: 665 return rc; 666} 667 668static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) 669{ 670 struct ide_io_ports *io_ports = &drive->hwif->io_ports; 671 struct ide_taskfile *tf = &task->tf; 672 u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; 673 674 if (task->tf_flags & IDE_TFLAG_FLAGGED) 675 HIHI = 0xFF; 676 677 if (task->tf_flags & IDE_TFLAG_OUT_DATA) 678 out_be32((void *)io_ports->data_addr, 679 (tf->hob_data << 8) | tf->data); 680 681 if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) 682 scc_ide_outb(tf->hob_feature, io_ports->feature_addr); 683 if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) 684 scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); 685 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) 686 scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); 687 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) 688 scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); 689 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) 690 scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); 691 692 if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) 693 scc_ide_outb(tf->feature, io_ports->feature_addr); 694 if (task->tf_flags & IDE_TFLAG_OUT_NSECT) 695 scc_ide_outb(tf->nsect, io_ports->nsect_addr); 696 if (task->tf_flags & IDE_TFLAG_OUT_LBAL) 697 scc_ide_outb(tf->lbal, io_ports->lbal_addr); 698 if (task->tf_flags & IDE_TFLAG_OUT_LBAM) 699 scc_ide_outb(tf->lbam, io_ports->lbam_addr); 700 if (task->tf_flags & IDE_TFLAG_OUT_LBAH) 701 scc_ide_outb(tf->lbah, io_ports->lbah_addr); 702 703 if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) 704 scc_ide_outb((tf->device & HIHI) | drive->select, 705 io_ports->device_addr); 706} 707 708static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) 709{ 710 struct ide_io_ports *io_ports = &drive->hwif->io_ports; 711 struct ide_taskfile *tf = &task->tf; 712 713 if (task->tf_flags & IDE_TFLAG_IN_DATA) { 714 u16 data = (u16)in_be32((void *)io_ports->data_addr); 715 716 tf->data = data & 0xff; 717 tf->hob_data = (data >> 8) & 0xff; 718 } 719 720 /* be sure we're looking at the low order bits */ 721 scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); 722 723 if (task->tf_flags & IDE_TFLAG_IN_FEATURE) 724 tf->feature = scc_ide_inb(io_ports->feature_addr); 725 if (task->tf_flags & IDE_TFLAG_IN_NSECT) 726 tf->nsect = scc_ide_inb(io_ports->nsect_addr); 727 if (task->tf_flags & IDE_TFLAG_IN_LBAL) 728 tf->lbal = scc_ide_inb(io_ports->lbal_addr); 729 if (task->tf_flags & IDE_TFLAG_IN_LBAM) 730 tf->lbam = scc_ide_inb(io_ports->lbam_addr); 731 if (task->tf_flags & IDE_TFLAG_IN_LBAH) 732 tf->lbah = scc_ide_inb(io_ports->lbah_addr); 733 if (task->tf_flags & IDE_TFLAG_IN_DEVICE) 734 tf->device = scc_ide_inb(io_ports->device_addr); 735 736 if (task->tf_flags & IDE_TFLAG_LBA48) { 737 scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); 738 739 if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) 740 tf->hob_feature = scc_ide_inb(io_ports->feature_addr); 741 if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) 742 tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); 743 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) 744 tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); 745 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) 746 tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); 747 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) 748 tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); 749 } 750} 751 752static void scc_input_data(ide_drive_t *drive, struct request *rq, 753 void *buf, unsigned int len) 754{ 755 unsigned long data_addr = drive->hwif->io_ports.data_addr; 756 757 len++; 758 759 if (drive->io_32bit) { 760 scc_ide_insl(data_addr, buf, len / 4); 761 762 if ((len & 3) >= 2) 763 scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); 764 } else 765 scc_ide_insw(data_addr, buf, len / 2); 766} 767 768static void scc_output_data(ide_drive_t *drive, struct request *rq, 769 void *buf, unsigned int len) 770{ 771 unsigned long data_addr = drive->hwif->io_ports.data_addr; 772 773 len++; 774 775 if (drive->io_32bit) { 776 scc_ide_outsl(data_addr, buf, len / 4); 777 778 if ((len & 3) >= 2) 779 scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); 780 } else 781 scc_ide_outsw(data_addr, buf, len / 2); 782} 783 784/** 785 * init_mmio_iops_scc - set up the iops for MMIO 786 * @hwif: interface to set up 787 * 788 */ 789 790static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) 791{ 792 struct pci_dev *dev = to_pci_dev(hwif->dev); 793 struct scc_ports *ports = pci_get_drvdata(dev); 794 unsigned long dma_base = ports->dma; 795 796 ide_set_hwifdata(hwif, ports); 797 798 hwif->dma_base = dma_base; 799 hwif->config_data = ports->ctl; 800} 801 802/** 803 * init_iops_scc - set up iops 804 * @hwif: interface to set up 805 * 806 * Do the basic setup for the SCC hardware interface 807 * and then do the MMIO setup. 808 */ 809 810static void __devinit init_iops_scc(ide_hwif_t *hwif) 811{ 812 struct pci_dev *dev = to_pci_dev(hwif->dev); 813 814 hwif->hwif_data = NULL; 815 if (pci_get_drvdata(dev) == NULL) 816 return; 817 init_mmio_iops_scc(hwif); 818} 819 820static int __devinit scc_init_dma(ide_hwif_t *hwif, 821 const struct ide_port_info *d) 822{ 823 return ide_allocate_dma_engine(hwif); 824} 825 826static u8 scc_cable_detect(ide_hwif_t *hwif) 827{ 828 return ATA_CBL_PATA80; 829} 830 831/** 832 * init_hwif_scc - set up hwif 833 * @hwif: interface to set up 834 * 835 * We do the basic set up of the interface structure. The SCC 836 * requires several custom handlers so we override the default 837 * ide DMA handlers appropriately. 838 */ 839 840static void __devinit init_hwif_scc(ide_hwif_t *hwif) 841{ 842 /* PTERADD */ 843 out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); 844 845 if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) 846 hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ 847 else 848 hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ 849} 850 851static const struct ide_tp_ops scc_tp_ops = { 852 .exec_command = scc_exec_command, 853 .read_status = scc_read_status, 854 .read_altstatus = scc_read_altstatus, 855 .read_sff_dma_status = scc_read_sff_dma_status, 856 857 .set_irq = scc_set_irq, 858 859 .tf_load = scc_tf_load, 860 .tf_read = scc_tf_read, 861 862 .input_data = scc_input_data, 863 .output_data = scc_output_data, 864}; 865 866static const struct ide_port_ops scc_port_ops = { 867 .set_pio_mode = scc_set_pio_mode, 868 .set_dma_mode = scc_set_dma_mode, 869 .udma_filter = scc_udma_filter, 870 .cable_detect = scc_cable_detect, 871}; 872 873static const struct ide_dma_ops scc_dma_ops = { 874 .dma_host_set = scc_dma_host_set, 875 .dma_setup = scc_dma_setup, 876 .dma_exec_cmd = ide_dma_exec_cmd, 877 .dma_start = scc_dma_start, 878 .dma_end = scc_dma_end, 879 .dma_test_irq = scc_dma_test_irq, 880 .dma_lost_irq = ide_dma_lost_irq, 881 .dma_timeout = ide_dma_timeout, 882}; 883 884#define DECLARE_SCC_DEV(name_str) \ 885 { \ 886 .name = name_str, \ 887 .init_iops = init_iops_scc, \ 888 .init_dma = scc_init_dma, \ 889 .init_hwif = init_hwif_scc, \ 890 .tp_ops = &scc_tp_ops, \ 891 .port_ops = &scc_port_ops, \ 892 .dma_ops = &scc_dma_ops, \ 893 .host_flags = IDE_HFLAG_SINGLE, \ 894 .pio_mask = ATA_PIO4, \ 895 } 896 897static const struct ide_port_info scc_chipsets[] __devinitdata = { 898 /* 0 */ DECLARE_SCC_DEV("sccIDE"), 899}; 900 901/** 902 * scc_init_one - pci layer discovery entry 903 * @dev: PCI device 904 * @id: ident table entry 905 * 906 * Called by the PCI code when it finds an SCC PATA controller. 907 * We then use the IDE PCI generic helper to do most of the work. 908 */ 909 910static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) 911{ 912 return init_setup_scc(dev, &scc_chipsets[id->driver_data]); 913} 914 915/** 916 * scc_remove - pci layer remove entry 917 * @dev: PCI device 918 * 919 * Called by the PCI code when it removes an SCC PATA controller. 920 */ 921 922static void __devexit scc_remove(struct pci_dev *dev) 923{ 924 struct scc_ports *ports = pci_get_drvdata(dev); 925 struct ide_host *host = ports->host; 926 927 ide_host_remove(host); 928 929 iounmap((void*)ports->dma); 930 iounmap((void*)ports->ctl); 931 pci_release_selected_regions(dev, (1 << 2) - 1); 932 memset(ports, 0, sizeof(*ports)); 933} 934 935static const struct pci_device_id scc_pci_tbl[] = { 936 { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, 937 { 0, }, 938}; 939MODULE_DEVICE_TABLE(pci, scc_pci_tbl); 940 941static struct pci_driver scc_pci_driver = { 942 .name = "SCC IDE", 943 .id_table = scc_pci_tbl, 944 .probe = scc_init_one, 945 .remove = __devexit_p(scc_remove), 946}; 947 948static int scc_ide_init(void) 949{ 950 return ide_pci_register_driver(&scc_pci_driver); 951} 952 953module_init(scc_ide_init); 954/* -- No exit code? 955static void scc_ide_exit(void) 956{ 957 ide_pci_unregister_driver(&scc_pci_driver); 958} 959module_exit(scc_ide_exit); 960 */ 961 962 963MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); 964MODULE_LICENSE("GPL"); 965