scc_pata.c revision c2ce5ca047ff6bbc41d491451c39e597c4537cd3
1/* 2 * Support for IDE interfaces on Celleb platform 3 * 4 * (C) Copyright 2006 TOSHIBA CORPORATION 5 * 6 * This code is based on drivers/ide/pci/siimage.c: 7 * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> 8 * Copyright (C) 2003 Red Hat 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, write to the Free Software Foundation, Inc., 22 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. 23 */ 24 25#include <linux/types.h> 26#include <linux/module.h> 27#include <linux/pci.h> 28#include <linux/delay.h> 29#include <linux/ide.h> 30#include <linux/init.h> 31 32#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 33 34#define SCC_PATA_NAME "scc IDE" 35 36#define TDVHSEL_MASTER 0x00000001 37#define TDVHSEL_SLAVE 0x00000004 38 39#define MODE_JCUSFEN 0x00000080 40 41#define CCKCTRL_ATARESET 0x00040000 42#define CCKCTRL_BUFCNT 0x00020000 43#define CCKCTRL_CRST 0x00010000 44#define CCKCTRL_OCLKEN 0x00000100 45#define CCKCTRL_ATACLKOEN 0x00000002 46#define CCKCTRL_LCLKEN 0x00000001 47 48#define QCHCD_IOS_SS 0x00000001 49 50#define QCHSD_STPDIAG 0x00020000 51 52#define INTMASK_MSK 0xD1000012 53#define INTSTS_SERROR 0x80000000 54#define INTSTS_PRERR 0x40000000 55#define INTSTS_RERR 0x10000000 56#define INTSTS_ICERR 0x01000000 57#define INTSTS_BMSINT 0x00000010 58#define INTSTS_BMHE 0x00000008 59#define INTSTS_IOIRQS 0x00000004 60#define INTSTS_INTRQ 0x00000002 61#define INTSTS_ACTEINT 0x00000001 62 63#define ECMODE_VALUE 0x01 64 65static struct scc_ports { 66 unsigned long ctl, dma; 67 struct ide_host *host; /* for removing port from system */ 68} scc_ports[MAX_HWIFS]; 69 70/* PIO transfer mode table */ 71/* JCHST */ 72static unsigned long JCHSTtbl[2][7] = { 73 {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ 74 {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ 75}; 76 77/* JCHHT */ 78static unsigned long JCHHTtbl[2][7] = { 79 {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ 80 {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ 81}; 82 83/* JCHCT */ 84static unsigned long JCHCTtbl[2][7] = { 85 {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ 86 {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ 87}; 88 89 90/* DMA transfer mode table */ 91/* JCHDCTM/JCHDCTS */ 92static unsigned long JCHDCTxtbl[2][7] = { 93 {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ 94 {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ 95}; 96 97/* JCSTWTM/JCSTWTS */ 98static unsigned long JCSTWTxtbl[2][7] = { 99 {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ 100 {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ 101}; 102 103/* JCTSS */ 104static unsigned long JCTSStbl[2][7] = { 105 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ 106 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ 107}; 108 109/* JCENVT */ 110static unsigned long JCENVTtbl[2][7] = { 111 {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ 112 {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ 113}; 114 115/* JCACTSELS/JCACTSELM */ 116static unsigned long JCACTSELtbl[2][7] = { 117 {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ 118 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ 119}; 120 121 122static u8 scc_ide_inb(unsigned long port) 123{ 124 u32 data = in_be32((void*)port); 125 return (u8)data; 126} 127 128static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) 129{ 130 out_be32((void *)hwif->io_ports.command_addr, cmd); 131 eieio(); 132 in_be32((void *)(hwif->dma_base + 0x01c)); 133 eieio(); 134} 135 136static u8 scc_read_status(ide_hwif_t *hwif) 137{ 138 return (u8)in_be32((void *)hwif->io_ports.status_addr); 139} 140 141static u8 scc_read_altstatus(ide_hwif_t *hwif) 142{ 143 return (u8)in_be32((void *)hwif->io_ports.ctl_addr); 144} 145 146static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) 147{ 148 return (u8)in_be32((void *)(hwif->dma_base + 4)); 149} 150 151static void scc_set_irq(ide_hwif_t *hwif, int on) 152{ 153 u8 ctl = ATA_DEVCTL_OBS; 154 155 if (on == 4) { /* hack for SRST */ 156 ctl |= 4; 157 on &= ~4; 158 } 159 160 ctl |= on ? 0 : 2; 161 162 out_be32((void *)hwif->io_ports.ctl_addr, ctl); 163 eieio(); 164 in_be32((void *)(hwif->dma_base + 0x01c)); 165 eieio(); 166} 167 168static void scc_ide_insw(unsigned long port, void *addr, u32 count) 169{ 170 u16 *ptr = (u16 *)addr; 171 while (count--) { 172 *ptr++ = le16_to_cpu(in_be32((void*)port)); 173 } 174} 175 176static void scc_ide_insl(unsigned long port, void *addr, u32 count) 177{ 178 u16 *ptr = (u16 *)addr; 179 while (count--) { 180 *ptr++ = le16_to_cpu(in_be32((void*)port)); 181 *ptr++ = le16_to_cpu(in_be32((void*)port)); 182 } 183} 184 185static void scc_ide_outb(u8 addr, unsigned long port) 186{ 187 out_be32((void*)port, addr); 188} 189 190static void 191scc_ide_outsw(unsigned long port, void *addr, u32 count) 192{ 193 u16 *ptr = (u16 *)addr; 194 while (count--) { 195 out_be32((void*)port, cpu_to_le16(*ptr++)); 196 } 197} 198 199static void 200scc_ide_outsl(unsigned long port, void *addr, u32 count) 201{ 202 u16 *ptr = (u16 *)addr; 203 while (count--) { 204 out_be32((void*)port, cpu_to_le16(*ptr++)); 205 out_be32((void*)port, cpu_to_le16(*ptr++)); 206 } 207} 208 209/** 210 * scc_set_pio_mode - set host controller for PIO mode 211 * @drive: drive 212 * @pio: PIO mode number 213 * 214 * Load the timing settings for this device mode into the 215 * controller. 216 */ 217 218static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) 219{ 220 ide_hwif_t *hwif = drive->hwif; 221 struct scc_ports *ports = ide_get_hwifdata(hwif); 222 unsigned long ctl_base = ports->ctl; 223 unsigned long cckctrl_port = ctl_base + 0xff0; 224 unsigned long piosht_port = ctl_base + 0x000; 225 unsigned long pioct_port = ctl_base + 0x004; 226 unsigned long reg; 227 int offset; 228 229 reg = in_be32((void __iomem *)cckctrl_port); 230 if (reg & CCKCTRL_ATACLKOEN) { 231 offset = 1; /* 133MHz */ 232 } else { 233 offset = 0; /* 100MHz */ 234 } 235 reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; 236 out_be32((void __iomem *)piosht_port, reg); 237 reg = JCHCTtbl[offset][pio]; 238 out_be32((void __iomem *)pioct_port, reg); 239} 240 241/** 242 * scc_set_dma_mode - set host controller for DMA mode 243 * @drive: drive 244 * @speed: DMA mode 245 * 246 * Load the timing settings for this device mode into the 247 * controller. 248 */ 249 250static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) 251{ 252 ide_hwif_t *hwif = drive->hwif; 253 struct scc_ports *ports = ide_get_hwifdata(hwif); 254 unsigned long ctl_base = ports->ctl; 255 unsigned long cckctrl_port = ctl_base + 0xff0; 256 unsigned long mdmact_port = ctl_base + 0x008; 257 unsigned long mcrcst_port = ctl_base + 0x00c; 258 unsigned long sdmact_port = ctl_base + 0x010; 259 unsigned long scrcst_port = ctl_base + 0x014; 260 unsigned long udenvt_port = ctl_base + 0x018; 261 unsigned long tdvhsel_port = ctl_base + 0x020; 262 int is_slave = drive->dn & 1; 263 int offset, idx; 264 unsigned long reg; 265 unsigned long jcactsel; 266 267 reg = in_be32((void __iomem *)cckctrl_port); 268 if (reg & CCKCTRL_ATACLKOEN) { 269 offset = 1; /* 133MHz */ 270 } else { 271 offset = 0; /* 100MHz */ 272 } 273 274 idx = speed - XFER_UDMA_0; 275 276 jcactsel = JCACTSELtbl[offset][idx]; 277 if (is_slave) { 278 out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); 279 out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); 280 jcactsel = jcactsel << 2; 281 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); 282 } else { 283 out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); 284 out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); 285 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); 286 } 287 reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; 288 out_be32((void __iomem *)udenvt_port, reg); 289} 290 291static void scc_dma_host_set(ide_drive_t *drive, int on) 292{ 293 ide_hwif_t *hwif = drive->hwif; 294 u8 unit = drive->dn & 1; 295 u8 dma_stat = scc_dma_sff_read_status(hwif); 296 297 if (on) 298 dma_stat |= (1 << (5 + unit)); 299 else 300 dma_stat &= ~(1 << (5 + unit)); 301 302 scc_ide_outb(dma_stat, hwif->dma_base + 4); 303} 304 305/** 306 * scc_ide_dma_setup - begin a DMA phase 307 * @drive: target device 308 * 309 * Build an IDE DMA PRD (IDE speak for scatter gather table) 310 * and then set up the DMA transfer registers. 311 * 312 * Returns 0 on success. If a PIO fallback is required then 1 313 * is returned. 314 */ 315 316static int scc_dma_setup(ide_drive_t *drive) 317{ 318 ide_hwif_t *hwif = drive->hwif; 319 struct request *rq = hwif->rq; 320 unsigned int reading; 321 u8 dma_stat; 322 323 if (rq_data_dir(rq)) 324 reading = 0; 325 else 326 reading = 1 << 3; 327 328 /* fall back to pio! */ 329 if (!ide_build_dmatable(drive, rq)) { 330 ide_map_sg(drive, rq); 331 return 1; 332 } 333 334 /* PRD table */ 335 out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); 336 337 /* specify r/w */ 338 out_be32((void __iomem *)hwif->dma_base, reading); 339 340 /* read DMA status for INTR & ERROR flags */ 341 dma_stat = scc_dma_sff_read_status(hwif); 342 343 /* clear INTR & ERROR flags */ 344 out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); 345 drive->waiting_for_dma = 1; 346 return 0; 347} 348 349static void scc_dma_start(ide_drive_t *drive) 350{ 351 ide_hwif_t *hwif = drive->hwif; 352 u8 dma_cmd = scc_ide_inb(hwif->dma_base); 353 354 /* start DMA */ 355 scc_ide_outb(dma_cmd | 1, hwif->dma_base); 356 wmb(); 357} 358 359static int __scc_dma_end(ide_drive_t *drive) 360{ 361 ide_hwif_t *hwif = drive->hwif; 362 u8 dma_stat, dma_cmd; 363 364 drive->waiting_for_dma = 0; 365 /* get DMA command mode */ 366 dma_cmd = scc_ide_inb(hwif->dma_base); 367 /* stop DMA */ 368 scc_ide_outb(dma_cmd & ~1, hwif->dma_base); 369 /* get DMA status */ 370 dma_stat = scc_dma_sff_read_status(hwif); 371 /* clear the INTR & ERROR bits */ 372 scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); 373 /* purge DMA mappings */ 374 ide_destroy_dmatable(drive); 375 /* verify good DMA status */ 376 wmb(); 377 return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; 378} 379 380/** 381 * scc_dma_end - Stop DMA 382 * @drive: IDE drive 383 * 384 * Check and clear INT Status register. 385 * Then call __scc_dma_end(). 386 */ 387 388static int scc_dma_end(ide_drive_t *drive) 389{ 390 ide_hwif_t *hwif = drive->hwif; 391 void __iomem *dma_base = (void __iomem *)hwif->dma_base; 392 unsigned long intsts_port = hwif->dma_base + 0x014; 393 u32 reg; 394 int dma_stat, data_loss = 0; 395 static int retry = 0; 396 397 /* errata A308 workaround: Step5 (check data loss) */ 398 /* We don't check non ide_disk because it is limited to UDMA4 */ 399 if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) 400 & ATA_ERR) && 401 drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { 402 reg = in_be32((void __iomem *)intsts_port); 403 if (!(reg & INTSTS_ACTEINT)) { 404 printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", 405 drive->name); 406 data_loss = 1; 407 if (retry++) { 408 struct request *rq = hwif->rq; 409 ide_drive_t *drive; 410 int i; 411 412 /* ERROR_RESET and drive->crc_count are needed 413 * to reduce DMA transfer mode in retry process. 414 */ 415 if (rq) 416 rq->errors |= ERROR_RESET; 417 418 ide_port_for_each_dev(i, drive, hwif) 419 drive->crc_count++; 420 } 421 } 422 } 423 424 while (1) { 425 reg = in_be32((void __iomem *)intsts_port); 426 427 if (reg & INTSTS_SERROR) { 428 printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); 429 out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); 430 431 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 432 continue; 433 } 434 435 if (reg & INTSTS_PRERR) { 436 u32 maea0, maec0; 437 unsigned long ctl_base = hwif->config_data; 438 439 maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); 440 maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); 441 442 printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); 443 444 out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); 445 446 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 447 continue; 448 } 449 450 if (reg & INTSTS_RERR) { 451 printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); 452 out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); 453 454 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 455 continue; 456 } 457 458 if (reg & INTSTS_ICERR) { 459 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); 460 461 printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); 462 out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); 463 continue; 464 } 465 466 if (reg & INTSTS_BMSINT) { 467 printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); 468 out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); 469 470 ide_do_reset(drive); 471 continue; 472 } 473 474 if (reg & INTSTS_BMHE) { 475 out_be32((void __iomem *)intsts_port, INTSTS_BMHE); 476 continue; 477 } 478 479 if (reg & INTSTS_ACTEINT) { 480 out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); 481 continue; 482 } 483 484 if (reg & INTSTS_IOIRQS) { 485 out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); 486 continue; 487 } 488 break; 489 } 490 491 dma_stat = __scc_dma_end(drive); 492 if (data_loss) 493 dma_stat |= 2; /* emulate DMA error (to retry command) */ 494 return dma_stat; 495} 496 497/* returns 1 if dma irq issued, 0 otherwise */ 498static int scc_dma_test_irq(ide_drive_t *drive) 499{ 500 ide_hwif_t *hwif = drive->hwif; 501 u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); 502 503 /* SCC errata A252,A308 workaround: Step4 */ 504 if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) 505 & ATA_ERR) && 506 (int_stat & INTSTS_INTRQ)) 507 return 1; 508 509 /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ 510 if (int_stat & INTSTS_IOIRQS) 511 return 1; 512 513 return 0; 514} 515 516static u8 scc_udma_filter(ide_drive_t *drive) 517{ 518 ide_hwif_t *hwif = drive->hwif; 519 u8 mask = hwif->ultra_mask; 520 521 /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ 522 if ((drive->media != ide_disk) && (mask & 0xE0)) { 523 printk(KERN_INFO "%s: limit %s to UDMA4\n", 524 SCC_PATA_NAME, drive->name); 525 mask = ATA_UDMA4; 526 } 527 528 return mask; 529} 530 531/** 532 * setup_mmio_scc - map CTRL/BMID region 533 * @dev: PCI device we are configuring 534 * @name: device name 535 * 536 */ 537 538static int setup_mmio_scc (struct pci_dev *dev, const char *name) 539{ 540 void __iomem *ctl_addr; 541 void __iomem *dma_addr; 542 int i, ret; 543 544 for (i = 0; i < MAX_HWIFS; i++) { 545 if (scc_ports[i].ctl == 0) 546 break; 547 } 548 if (i >= MAX_HWIFS) 549 return -ENOMEM; 550 551 ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); 552 if (ret < 0) { 553 printk(KERN_ERR "%s: can't reserve resources\n", name); 554 return ret; 555 } 556 557 ctl_addr = pci_ioremap_bar(dev, 0); 558 if (!ctl_addr) 559 goto fail_0; 560 561 dma_addr = pci_ioremap_bar(dev, 1); 562 if (!dma_addr) 563 goto fail_1; 564 565 pci_set_master(dev); 566 scc_ports[i].ctl = (unsigned long)ctl_addr; 567 scc_ports[i].dma = (unsigned long)dma_addr; 568 pci_set_drvdata(dev, (void *) &scc_ports[i]); 569 570 return 1; 571 572 fail_1: 573 iounmap(ctl_addr); 574 fail_0: 575 return -ENOMEM; 576} 577 578static int scc_ide_setup_pci_device(struct pci_dev *dev, 579 const struct ide_port_info *d) 580{ 581 struct scc_ports *ports = pci_get_drvdata(dev); 582 struct ide_host *host; 583 hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; 584 int i, rc; 585 586 memset(&hw, 0, sizeof(hw)); 587 for (i = 0; i <= 8; i++) 588 hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; 589 hw.irq = dev->irq; 590 hw.dev = &dev->dev; 591 hw.chipset = ide_pci; 592 593 rc = ide_host_add(d, hws, &host); 594 if (rc) 595 return rc; 596 597 ports->host = host; 598 599 return 0; 600} 601 602/** 603 * init_setup_scc - set up an SCC PATA Controller 604 * @dev: PCI device 605 * @d: IDE port info 606 * 607 * Perform the initial set up for this device. 608 */ 609 610static int __devinit init_setup_scc(struct pci_dev *dev, 611 const struct ide_port_info *d) 612{ 613 unsigned long ctl_base; 614 unsigned long dma_base; 615 unsigned long cckctrl_port; 616 unsigned long intmask_port; 617 unsigned long mode_port; 618 unsigned long ecmode_port; 619 u32 reg = 0; 620 struct scc_ports *ports; 621 int rc; 622 623 rc = pci_enable_device(dev); 624 if (rc) 625 goto end; 626 627 rc = setup_mmio_scc(dev, d->name); 628 if (rc < 0) 629 goto end; 630 631 ports = pci_get_drvdata(dev); 632 ctl_base = ports->ctl; 633 dma_base = ports->dma; 634 cckctrl_port = ctl_base + 0xff0; 635 intmask_port = dma_base + 0x010; 636 mode_port = ctl_base + 0x024; 637 ecmode_port = ctl_base + 0xf00; 638 639 /* controller initialization */ 640 reg = 0; 641 out_be32((void*)cckctrl_port, reg); 642 reg |= CCKCTRL_ATACLKOEN; 643 out_be32((void*)cckctrl_port, reg); 644 reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; 645 out_be32((void*)cckctrl_port, reg); 646 reg |= CCKCTRL_CRST; 647 out_be32((void*)cckctrl_port, reg); 648 649 for (;;) { 650 reg = in_be32((void*)cckctrl_port); 651 if (reg & CCKCTRL_CRST) 652 break; 653 udelay(5000); 654 } 655 656 reg |= CCKCTRL_ATARESET; 657 out_be32((void*)cckctrl_port, reg); 658 659 out_be32((void*)ecmode_port, ECMODE_VALUE); 660 out_be32((void*)mode_port, MODE_JCUSFEN); 661 out_be32((void*)intmask_port, INTMASK_MSK); 662 663 rc = scc_ide_setup_pci_device(dev, d); 664 665 end: 666 return rc; 667} 668 669static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) 670{ 671 struct ide_io_ports *io_ports = &drive->hwif->io_ports; 672 struct ide_taskfile *tf = &task->tf; 673 u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; 674 675 if (task->tf_flags & IDE_TFLAG_FLAGGED) 676 HIHI = 0xFF; 677 678 if (task->tf_flags & IDE_TFLAG_OUT_DATA) 679 out_be32((void *)io_ports->data_addr, 680 (tf->hob_data << 8) | tf->data); 681 682 if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) 683 scc_ide_outb(tf->hob_feature, io_ports->feature_addr); 684 if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) 685 scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); 686 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) 687 scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); 688 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) 689 scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); 690 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) 691 scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); 692 693 if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) 694 scc_ide_outb(tf->feature, io_ports->feature_addr); 695 if (task->tf_flags & IDE_TFLAG_OUT_NSECT) 696 scc_ide_outb(tf->nsect, io_ports->nsect_addr); 697 if (task->tf_flags & IDE_TFLAG_OUT_LBAL) 698 scc_ide_outb(tf->lbal, io_ports->lbal_addr); 699 if (task->tf_flags & IDE_TFLAG_OUT_LBAM) 700 scc_ide_outb(tf->lbam, io_ports->lbam_addr); 701 if (task->tf_flags & IDE_TFLAG_OUT_LBAH) 702 scc_ide_outb(tf->lbah, io_ports->lbah_addr); 703 704 if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) 705 scc_ide_outb((tf->device & HIHI) | drive->select, 706 io_ports->device_addr); 707} 708 709static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) 710{ 711 struct ide_io_ports *io_ports = &drive->hwif->io_ports; 712 struct ide_taskfile *tf = &task->tf; 713 714 if (task->tf_flags & IDE_TFLAG_IN_DATA) { 715 u16 data = (u16)in_be32((void *)io_ports->data_addr); 716 717 tf->data = data & 0xff; 718 tf->hob_data = (data >> 8) & 0xff; 719 } 720 721 /* be sure we're looking at the low order bits */ 722 scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); 723 724 if (task->tf_flags & IDE_TFLAG_IN_FEATURE) 725 tf->feature = scc_ide_inb(io_ports->feature_addr); 726 if (task->tf_flags & IDE_TFLAG_IN_NSECT) 727 tf->nsect = scc_ide_inb(io_ports->nsect_addr); 728 if (task->tf_flags & IDE_TFLAG_IN_LBAL) 729 tf->lbal = scc_ide_inb(io_ports->lbal_addr); 730 if (task->tf_flags & IDE_TFLAG_IN_LBAM) 731 tf->lbam = scc_ide_inb(io_ports->lbam_addr); 732 if (task->tf_flags & IDE_TFLAG_IN_LBAH) 733 tf->lbah = scc_ide_inb(io_ports->lbah_addr); 734 if (task->tf_flags & IDE_TFLAG_IN_DEVICE) 735 tf->device = scc_ide_inb(io_ports->device_addr); 736 737 if (task->tf_flags & IDE_TFLAG_LBA48) { 738 scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); 739 740 if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) 741 tf->hob_feature = scc_ide_inb(io_ports->feature_addr); 742 if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) 743 tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr); 744 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) 745 tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr); 746 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) 747 tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr); 748 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) 749 tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr); 750 } 751} 752 753static void scc_input_data(ide_drive_t *drive, struct request *rq, 754 void *buf, unsigned int len) 755{ 756 unsigned long data_addr = drive->hwif->io_ports.data_addr; 757 758 len++; 759 760 if (drive->io_32bit) { 761 scc_ide_insl(data_addr, buf, len / 4); 762 763 if ((len & 3) >= 2) 764 scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); 765 } else 766 scc_ide_insw(data_addr, buf, len / 2); 767} 768 769static void scc_output_data(ide_drive_t *drive, struct request *rq, 770 void *buf, unsigned int len) 771{ 772 unsigned long data_addr = drive->hwif->io_ports.data_addr; 773 774 len++; 775 776 if (drive->io_32bit) { 777 scc_ide_outsl(data_addr, buf, len / 4); 778 779 if ((len & 3) >= 2) 780 scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); 781 } else 782 scc_ide_outsw(data_addr, buf, len / 2); 783} 784 785/** 786 * init_mmio_iops_scc - set up the iops for MMIO 787 * @hwif: interface to set up 788 * 789 */ 790 791static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) 792{ 793 struct pci_dev *dev = to_pci_dev(hwif->dev); 794 struct scc_ports *ports = pci_get_drvdata(dev); 795 unsigned long dma_base = ports->dma; 796 797 ide_set_hwifdata(hwif, ports); 798 799 hwif->dma_base = dma_base; 800 hwif->config_data = ports->ctl; 801} 802 803/** 804 * init_iops_scc - set up iops 805 * @hwif: interface to set up 806 * 807 * Do the basic setup for the SCC hardware interface 808 * and then do the MMIO setup. 809 */ 810 811static void __devinit init_iops_scc(ide_hwif_t *hwif) 812{ 813 struct pci_dev *dev = to_pci_dev(hwif->dev); 814 815 hwif->hwif_data = NULL; 816 if (pci_get_drvdata(dev) == NULL) 817 return; 818 init_mmio_iops_scc(hwif); 819} 820 821static int __devinit scc_init_dma(ide_hwif_t *hwif, 822 const struct ide_port_info *d) 823{ 824 return ide_allocate_dma_engine(hwif); 825} 826 827static u8 scc_cable_detect(ide_hwif_t *hwif) 828{ 829 return ATA_CBL_PATA80; 830} 831 832/** 833 * init_hwif_scc - set up hwif 834 * @hwif: interface to set up 835 * 836 * We do the basic set up of the interface structure. The SCC 837 * requires several custom handlers so we override the default 838 * ide DMA handlers appropriately. 839 */ 840 841static void __devinit init_hwif_scc(ide_hwif_t *hwif) 842{ 843 /* PTERADD */ 844 out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); 845 846 if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) 847 hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ 848 else 849 hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ 850} 851 852static const struct ide_tp_ops scc_tp_ops = { 853 .exec_command = scc_exec_command, 854 .read_status = scc_read_status, 855 .read_altstatus = scc_read_altstatus, 856 857 .set_irq = scc_set_irq, 858 859 .tf_load = scc_tf_load, 860 .tf_read = scc_tf_read, 861 862 .input_data = scc_input_data, 863 .output_data = scc_output_data, 864}; 865 866static const struct ide_port_ops scc_port_ops = { 867 .set_pio_mode = scc_set_pio_mode, 868 .set_dma_mode = scc_set_dma_mode, 869 .udma_filter = scc_udma_filter, 870 .cable_detect = scc_cable_detect, 871}; 872 873static const struct ide_dma_ops scc_dma_ops = { 874 .dma_host_set = scc_dma_host_set, 875 .dma_setup = scc_dma_setup, 876 .dma_exec_cmd = ide_dma_exec_cmd, 877 .dma_start = scc_dma_start, 878 .dma_end = scc_dma_end, 879 .dma_test_irq = scc_dma_test_irq, 880 .dma_lost_irq = ide_dma_lost_irq, 881 .dma_timeout = ide_dma_timeout, 882 .dma_sff_read_status = scc_dma_sff_read_status, 883}; 884 885#define DECLARE_SCC_DEV(name_str) \ 886 { \ 887 .name = name_str, \ 888 .init_iops = init_iops_scc, \ 889 .init_dma = scc_init_dma, \ 890 .init_hwif = init_hwif_scc, \ 891 .tp_ops = &scc_tp_ops, \ 892 .port_ops = &scc_port_ops, \ 893 .dma_ops = &scc_dma_ops, \ 894 .host_flags = IDE_HFLAG_SINGLE, \ 895 .pio_mask = ATA_PIO4, \ 896 } 897 898static const struct ide_port_info scc_chipsets[] __devinitdata = { 899 /* 0 */ DECLARE_SCC_DEV("sccIDE"), 900}; 901 902/** 903 * scc_init_one - pci layer discovery entry 904 * @dev: PCI device 905 * @id: ident table entry 906 * 907 * Called by the PCI code when it finds an SCC PATA controller. 908 * We then use the IDE PCI generic helper to do most of the work. 909 */ 910 911static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) 912{ 913 return init_setup_scc(dev, &scc_chipsets[id->driver_data]); 914} 915 916/** 917 * scc_remove - pci layer remove entry 918 * @dev: PCI device 919 * 920 * Called by the PCI code when it removes an SCC PATA controller. 921 */ 922 923static void __devexit scc_remove(struct pci_dev *dev) 924{ 925 struct scc_ports *ports = pci_get_drvdata(dev); 926 struct ide_host *host = ports->host; 927 928 ide_host_remove(host); 929 930 iounmap((void*)ports->dma); 931 iounmap((void*)ports->ctl); 932 pci_release_selected_regions(dev, (1 << 2) - 1); 933 memset(ports, 0, sizeof(*ports)); 934} 935 936static const struct pci_device_id scc_pci_tbl[] = { 937 { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, 938 { 0, }, 939}; 940MODULE_DEVICE_TABLE(pci, scc_pci_tbl); 941 942static struct pci_driver scc_pci_driver = { 943 .name = "SCC IDE", 944 .id_table = scc_pci_tbl, 945 .probe = scc_init_one, 946 .remove = __devexit_p(scc_remove), 947}; 948 949static int scc_ide_init(void) 950{ 951 return ide_pci_register_driver(&scc_pci_driver); 952} 953 954module_init(scc_ide_init); 955/* -- No exit code? 956static void scc_ide_exit(void) 957{ 958 ide_pci_unregister_driver(&scc_pci_driver); 959} 960module_exit(scc_ide_exit); 961 */ 962 963 964MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); 965MODULE_LICENSE("GPL"); 966