sis5513.c revision e085b3cae85af47eb0a3eda3186bd898310fb322
1/* 2 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> 3 * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer 4 * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> 5 * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz 6 * 7 * May be copied or modified under the terms of the GNU General Public License 8 * 9 * 10 * Thanks : 11 * 12 * SiS Taiwan : for direct support and hardware. 13 * Daniela Engert : for initial ATA100 advices and numerous others. 14 * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : 15 * for checking code correctness, providing patches. 16 * 17 * 18 * Original tests and design on the SiS620 chipset. 19 * ATA100 tests and design on the SiS735 chipset. 20 * ATA16/33 support from specs 21 * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> 22 * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz> 23 * 24 * Documentation: 25 * SiS chipset documentation available under NDA to companies only 26 * (not to individuals). 27 */ 28 29/* 30 * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original 31 * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511 32 * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip. 33 * 34 * Later SiS chipsets integrated the 5513 functionality into the NorthBridge, 35 * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We 36 * can figure out that we have a more modern and more capable 5513 by looking 37 * for the respective NorthBridge IDs. 38 * 39 * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513 40 * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI 41 * ID, while the now ATA-133 capable 5513 still has the same PCI ID. 42 * Fortunately the 5513 can be 'unmasked' by fiddling with some config space 43 * bits, changing its device id to the true one - 5517 for 961 and 5518 for 44 * 962/963. 45 */ 46 47#include <linux/types.h> 48#include <linux/module.h> 49#include <linux/kernel.h> 50#include <linux/pci.h> 51#include <linux/init.h> 52#include <linux/ide.h> 53 54#define DRV_NAME "sis5513" 55 56/* registers layout and init values are chipset family dependant */ 57 58#define ATA_16 0x01 59#define ATA_33 0x02 60#define ATA_66 0x03 61#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */ 62#define ATA_100 0x05 63#define ATA_133a 0x06 /* SiS961b with 133 support */ 64#define ATA_133 0x07 /* SiS962/963 */ 65 66static u8 chipset_family; 67 68/* 69 * Devices supported 70 */ 71static const struct { 72 const char *name; 73 u16 host_id; 74 u8 chipset_family; 75 u8 flags; 76} SiSHostChipInfo[] = { 77 { "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 }, 78 { "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 }, 79 { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 }, 80 { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, 81 { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, 82 { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, 83 { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 }, 84 { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 }, 85 86 { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a }, 87 { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a }, 88 89 { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 }, 90 { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 }, 91 { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 }, 92 { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 }, 93 { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 }, 94 95 { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 }, 96 { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 }, 97 { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 }, 98 { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 }, 99 { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 }, 100 { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 }, 101 102 { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 }, 103 { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 }, 104 { "SiS5517", PCI_DEVICE_ID_SI_5517, ATA_16 }, 105 { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 }, 106}; 107 108/* Cycle time bits and values vary across chip dma capabilities 109 These three arrays hold the register layout and the values to set. 110 Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */ 111 112/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */ 113static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 }; 114static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 }; 115static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { 116 { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ 117 { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ 118 { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */ 119 { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */ 120 { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific), 121 different cycle_time range and offset */ 122 { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */ 123 { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */ 124 { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */ 125}; 126/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133 127 See SiS962 data sheet for more detail */ 128static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { 129 { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ 130 { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ 131 { 2, 1, 1, 0, 0, 0, 0 }, 132 { 4, 3, 2, 1, 0, 0, 0 }, 133 { 4, 3, 2, 1, 0, 0, 0 }, 134 { 6, 4, 3, 1, 1, 1, 0 }, 135 { 9, 6, 4, 2, 2, 2, 2 }, 136 { 9, 6, 4, 2, 2, 2, 2 }, 137}; 138/* Initialize time, Active time, Recovery time vary across 139 IDE clock settings. These 3 arrays hold the register value 140 for PIO0/1/2/3/4 and DMA0/1/2 mode in order */ 141static u8 ini_time_value[][8] = { 142 { 0, 0, 0, 0, 0, 0, 0, 0 }, 143 { 0, 0, 0, 0, 0, 0, 0, 0 }, 144 { 2, 1, 0, 0, 0, 1, 0, 0 }, 145 { 4, 3, 1, 1, 1, 3, 1, 1 }, 146 { 4, 3, 1, 1, 1, 3, 1, 1 }, 147 { 6, 4, 2, 2, 2, 4, 2, 2 }, 148 { 9, 6, 3, 3, 3, 6, 3, 3 }, 149 { 9, 6, 3, 3, 3, 6, 3, 3 }, 150}; 151static u8 act_time_value[][8] = { 152 { 0, 0, 0, 0, 0, 0, 0, 0 }, 153 { 0, 0, 0, 0, 0, 0, 0, 0 }, 154 { 9, 9, 9, 2, 2, 7, 2, 2 }, 155 { 19, 19, 19, 5, 4, 14, 5, 4 }, 156 { 19, 19, 19, 5, 4, 14, 5, 4 }, 157 { 28, 28, 28, 7, 6, 21, 7, 6 }, 158 { 38, 38, 38, 10, 9, 28, 10, 9 }, 159 { 38, 38, 38, 10, 9, 28, 10, 9 }, 160}; 161static u8 rco_time_value[][8] = { 162 { 0, 0, 0, 0, 0, 0, 0, 0 }, 163 { 0, 0, 0, 0, 0, 0, 0, 0 }, 164 { 9, 2, 0, 2, 0, 7, 1, 1 }, 165 { 19, 5, 1, 5, 2, 16, 3, 2 }, 166 { 19, 5, 1, 5, 2, 16, 3, 2 }, 167 { 30, 9, 3, 9, 4, 25, 6, 4 }, 168 { 40, 12, 4, 12, 5, 34, 12, 5 }, 169 { 40, 12, 4, 12, 5, 34, 12, 5 }, 170}; 171 172/* 173 * Printing configuration 174 */ 175/* Used for chipset type printing at boot time */ 176static char *chipset_capability[] = { 177 "ATA", "ATA 16", 178 "ATA 33", "ATA 66", 179 "ATA 100 (1st gen)", "ATA 100 (2nd gen)", 180 "ATA 133 (1st gen)", "ATA 133 (2nd gen)" 181}; 182 183/* 184 * Configuration functions 185 */ 186 187static u8 sis_ata133_get_base(ide_drive_t *drive) 188{ 189 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 190 u32 reg54 = 0; 191 192 pci_read_config_dword(dev, 0x54, ®54); 193 194 return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4; 195} 196 197static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode) 198{ 199 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 200 u16 t1 = 0; 201 u8 drive_pci = 0x40 + drive->dn * 2; 202 203 const u16 pio_timings[] = { 0x000, 0x607, 0x404, 0x303, 0x301 }; 204 const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 }; 205 206 pci_read_config_word(dev, drive_pci, &t1); 207 208 /* clear active/recovery timings */ 209 t1 &= ~0x070f; 210 if (mode >= XFER_MW_DMA_0) { 211 if (chipset_family > ATA_16) 212 t1 &= ~0x8000; /* disable UDMA */ 213 t1 |= mwdma_timings[mode - XFER_MW_DMA_0]; 214 } else 215 t1 |= pio_timings[mode - XFER_PIO_0]; 216 217 pci_write_config_word(dev, drive_pci, t1); 218} 219 220static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode) 221{ 222 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 223 u8 t1, drive_pci = 0x40 + drive->dn * 2; 224 225 /* timing bits: 7:4 active 3:0 recovery */ 226 const u8 pio_timings[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; 227 const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 }; 228 229 if (mode >= XFER_MW_DMA_0) { 230 u8 t2 = 0; 231 232 pci_read_config_byte(dev, drive_pci, &t2); 233 t2 &= ~0x80; /* disable UDMA */ 234 pci_write_config_byte(dev, drive_pci, t2); 235 236 t1 = mwdma_timings[mode - XFER_MW_DMA_0]; 237 } else 238 t1 = pio_timings[mode - XFER_PIO_0]; 239 240 pci_write_config_byte(dev, drive_pci + 1, t1); 241} 242 243static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode) 244{ 245 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 246 u32 t1 = 0; 247 u8 drive_pci = sis_ata133_get_base(drive), clk, idx; 248 249 pci_read_config_dword(dev, drive_pci, &t1); 250 251 t1 &= 0xc0c00fff; 252 clk = (t1 & 0x08) ? ATA_133 : ATA_100; 253 if (mode >= XFER_MW_DMA_0) { 254 t1 &= ~0x04; /* disable UDMA */ 255 idx = mode - XFER_MW_DMA_0 + 5; 256 } else 257 idx = mode - XFER_PIO_0; 258 t1 |= ini_time_value[clk][idx] << 12; 259 t1 |= act_time_value[clk][idx] << 16; 260 t1 |= rco_time_value[clk][idx] << 24; 261 262 pci_write_config_dword(dev, drive_pci, t1); 263} 264 265static void sis_program_timings(ide_drive_t *drive, const u8 mode) 266{ 267 if (chipset_family < ATA_100) /* ATA_16/33/66/100a */ 268 sis_ata16_program_timings(drive, mode); 269 else if (chipset_family < ATA_133) /* ATA_100/133a */ 270 sis_ata100_program_timings(drive, mode); 271 else /* ATA_133 */ 272 sis_ata133_program_timings(drive, mode); 273} 274 275static void config_drive_art_rwp(ide_drive_t *drive) 276{ 277 ide_hwif_t *hwif = drive->hwif; 278 struct pci_dev *dev = to_pci_dev(hwif->dev); 279 u8 reg4bh = 0; 280 u8 rw_prefetch = 0; 281 282 pci_read_config_byte(dev, 0x4b, ®4bh); 283 284 rw_prefetch = reg4bh & ~(0x11 << drive->dn); 285 286 if (drive->media == ide_disk) 287 rw_prefetch |= 0x11 << drive->dn; 288 289 if (reg4bh != rw_prefetch) 290 pci_write_config_byte(dev, 0x4b, rw_prefetch); 291} 292 293static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) 294{ 295 config_drive_art_rwp(drive); 296 sis_program_timings(drive, drive->pio_mode); 297} 298 299static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) 300{ 301 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 302 u32 regdw = 0; 303 u8 drive_pci = sis_ata133_get_base(drive), clk, idx; 304 305 pci_read_config_dword(dev, drive_pci, ®dw); 306 307 regdw |= 0x04; 308 regdw &= 0xfffff00f; 309 /* check if ATA133 enable */ 310 clk = (regdw & 0x08) ? ATA_133 : ATA_100; 311 idx = mode - XFER_UDMA_0; 312 regdw |= cycle_time_value[clk][idx] << 4; 313 regdw |= cvs_time_value[clk][idx] << 8; 314 315 pci_write_config_dword(dev, drive_pci, regdw); 316} 317 318static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode) 319{ 320 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 321 u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family; 322 323 pci_read_config_byte(dev, drive_pci + 1, ®); 324 325 /* force the UDMA bit on if we want to use UDMA */ 326 reg |= 0x80; 327 /* clean reg cycle time bits */ 328 reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]); 329 /* set reg cycle time bits */ 330 reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i]; 331 332 pci_write_config_byte(dev, drive_pci + 1, reg); 333} 334 335static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) 336{ 337 if (chipset_family >= ATA_133) /* ATA_133 */ 338 sis_ata133_program_udma_timings(drive, mode); 339 else /* ATA_33/66/100a/100/133a */ 340 sis_ata33_program_udma_timings(drive, mode); 341} 342 343static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) 344{ 345 if (speed >= XFER_UDMA_0) 346 sis_program_udma_timings(drive, speed); 347 else 348 sis_program_timings(drive, speed); 349} 350 351static u8 sis_ata133_udma_filter(ide_drive_t *drive) 352{ 353 struct pci_dev *dev = to_pci_dev(drive->hwif->dev); 354 u32 regdw = 0; 355 u8 drive_pci = sis_ata133_get_base(drive); 356 357 pci_read_config_dword(dev, drive_pci, ®dw); 358 359 /* if ATA133 disable, we should not set speed above UDMA5 */ 360 return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; 361} 362 363static int __devinit sis_find_family(struct pci_dev *dev) 364{ 365 struct pci_dev *host; 366 int i = 0; 367 368 chipset_family = 0; 369 370 for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) { 371 372 host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL); 373 374 if (!host) 375 continue; 376 377 chipset_family = SiSHostChipInfo[i].chipset_family; 378 379 /* Special case for SiS630 : 630S/ET is ATA_100a */ 380 if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) { 381 if (host->revision >= 0x30) 382 chipset_family = ATA_100a; 383 } 384 pci_dev_put(host); 385 386 printk(KERN_INFO DRV_NAME " %s: %s %s controller\n", 387 pci_name(dev), SiSHostChipInfo[i].name, 388 chipset_capability[chipset_family]); 389 } 390 391 if (!chipset_family) { /* Belongs to pci-quirks */ 392 393 u32 idemisc; 394 u16 trueid; 395 396 /* Disable ID masking and register remapping */ 397 pci_read_config_dword(dev, 0x54, &idemisc); 398 pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff)); 399 pci_read_config_word(dev, PCI_DEVICE_ID, &trueid); 400 pci_write_config_dword(dev, 0x54, idemisc); 401 402 if (trueid == 0x5518) { 403 printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n", 404 pci_name(dev)); 405 chipset_family = ATA_133; 406 407 /* Check for 5513 compability mapping 408 * We must use this, else the port enabled code will fail, 409 * as it expects the enablebits at 0x4a. 410 */ 411 if ((idemisc & 0x40000000) == 0) { 412 pci_write_config_dword(dev, 0x54, idemisc | 0x40000000); 413 printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n", 414 pci_name(dev)); 415 } 416 } 417 } 418 419 if (!chipset_family) { /* Belongs to pci-quirks */ 420 421 struct pci_dev *lpc_bridge; 422 u16 trueid; 423 u8 prefctl; 424 u8 idecfg; 425 426 pci_read_config_byte(dev, 0x4a, &idecfg); 427 pci_write_config_byte(dev, 0x4a, idecfg | 0x10); 428 pci_read_config_word(dev, PCI_DEVICE_ID, &trueid); 429 pci_write_config_byte(dev, 0x4a, idecfg); 430 431 if (trueid == 0x5517) { /* SiS 961/961B */ 432 433 lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */ 434 pci_read_config_byte(dev, 0x49, &prefctl); 435 pci_dev_put(lpc_bridge); 436 437 if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { 438 printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n", 439 pci_name(dev)); 440 chipset_family = ATA_133a; 441 } else { 442 printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n", 443 pci_name(dev)); 444 chipset_family = ATA_100; 445 } 446 } 447 } 448 449 return chipset_family; 450} 451 452static int init_chipset_sis5513(struct pci_dev *dev) 453{ 454 /* Make general config ops here 455 1/ tell IDE channels to operate in Compatibility mode only 456 2/ tell old chips to allow per drive IDE timings */ 457 458 u8 reg; 459 u16 regw; 460 461 switch (chipset_family) { 462 case ATA_133: 463 /* SiS962 operation mode */ 464 pci_read_config_word(dev, 0x50, ®w); 465 if (regw & 0x08) 466 pci_write_config_word(dev, 0x50, regw&0xfff7); 467 pci_read_config_word(dev, 0x52, ®w); 468 if (regw & 0x08) 469 pci_write_config_word(dev, 0x52, regw&0xfff7); 470 break; 471 case ATA_133a: 472 case ATA_100: 473 /* Fixup latency */ 474 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); 475 /* Set compatibility bit */ 476 pci_read_config_byte(dev, 0x49, ®); 477 if (!(reg & 0x01)) 478 pci_write_config_byte(dev, 0x49, reg|0x01); 479 break; 480 case ATA_100a: 481 case ATA_66: 482 /* Fixup latency */ 483 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); 484 485 /* On ATA_66 chips the bit was elsewhere */ 486 pci_read_config_byte(dev, 0x52, ®); 487 if (!(reg & 0x04)) 488 pci_write_config_byte(dev, 0x52, reg|0x04); 489 break; 490 case ATA_33: 491 /* On ATA_33 we didn't have a single bit to set */ 492 pci_read_config_byte(dev, 0x09, ®); 493 if ((reg & 0x0f) != 0x00) 494 pci_write_config_byte(dev, 0x09, reg&0xf0); 495 case ATA_16: 496 /* force per drive recovery and active timings 497 needed on ATA_33 and below chips */ 498 pci_read_config_byte(dev, 0x52, ®); 499 if (!(reg & 0x08)) 500 pci_write_config_byte(dev, 0x52, reg|0x08); 501 break; 502 } 503 504 return 0; 505} 506 507struct sis_laptop { 508 u16 device; 509 u16 subvendor; 510 u16 subdevice; 511}; 512 513static const struct sis_laptop sis_laptop[] = { 514 /* devid, subvendor, subdev */ 515 { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ 516 { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */ 517 { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ 518 /* end marker */ 519 { 0, } 520}; 521 522static u8 sis_cable_detect(ide_hwif_t *hwif) 523{ 524 struct pci_dev *pdev = to_pci_dev(hwif->dev); 525 const struct sis_laptop *lap = &sis_laptop[0]; 526 u8 ata66 = 0; 527 528 while (lap->device) { 529 if (lap->device == pdev->device && 530 lap->subvendor == pdev->subsystem_vendor && 531 lap->subdevice == pdev->subsystem_device) 532 return ATA_CBL_PATA40_SHORT; 533 lap++; 534 } 535 536 if (chipset_family >= ATA_133) { 537 u16 regw = 0; 538 u16 reg_addr = hwif->channel ? 0x52: 0x50; 539 pci_read_config_word(pdev, reg_addr, ®w); 540 ata66 = (regw & 0x8000) ? 0 : 1; 541 } else if (chipset_family >= ATA_66) { 542 u8 reg48h = 0; 543 u8 mask = hwif->channel ? 0x20 : 0x10; 544 pci_read_config_byte(pdev, 0x48, ®48h); 545 ata66 = (reg48h & mask) ? 0 : 1; 546 } 547 548 return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; 549} 550 551static const struct ide_port_ops sis_port_ops = { 552 .set_pio_mode = sis_set_pio_mode, 553 .set_dma_mode = sis_set_dma_mode, 554 .cable_detect = sis_cable_detect, 555}; 556 557static const struct ide_port_ops sis_ata133_port_ops = { 558 .set_pio_mode = sis_set_pio_mode, 559 .set_dma_mode = sis_set_dma_mode, 560 .udma_filter = sis_ata133_udma_filter, 561 .cable_detect = sis_cable_detect, 562}; 563 564static const struct ide_port_info sis5513_chipset __devinitdata = { 565 .name = DRV_NAME, 566 .init_chipset = init_chipset_sis5513, 567 .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, 568 .host_flags = IDE_HFLAG_NO_AUTODMA, 569 .pio_mask = ATA_PIO4, 570 .mwdma_mask = ATA_MWDMA2, 571}; 572 573static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) 574{ 575 struct ide_port_info d = sis5513_chipset; 576 u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; 577 int rc; 578 579 rc = pci_enable_device(dev); 580 if (rc) 581 return rc; 582 583 if (sis_find_family(dev) == 0) 584 return -ENOTSUPP; 585 586 if (chipset_family >= ATA_133) 587 d.port_ops = &sis_ata133_port_ops; 588 else 589 d.port_ops = &sis_port_ops; 590 591 d.udma_mask = udma_rates[chipset_family]; 592 593 return ide_pci_init_one(dev, &d, NULL); 594} 595 596static void __devexit sis5513_remove(struct pci_dev *dev) 597{ 598 ide_pci_remove(dev); 599 pci_disable_device(dev); 600} 601 602static const struct pci_device_id sis5513_pci_tbl[] = { 603 { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 }, 604 { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 }, 605 { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 }, 606 { 0, }, 607}; 608MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl); 609 610static struct pci_driver sis5513_pci_driver = { 611 .name = "SIS_IDE", 612 .id_table = sis5513_pci_tbl, 613 .probe = sis5513_init_one, 614 .remove = __devexit_p(sis5513_remove), 615 .suspend = ide_pci_suspend, 616 .resume = ide_pci_resume, 617}; 618 619static int __init sis5513_ide_init(void) 620{ 621 return ide_pci_register_driver(&sis5513_pci_driver); 622} 623 624static void __exit sis5513_ide_exit(void) 625{ 626 pci_unregister_driver(&sis5513_pci_driver); 627} 628 629module_init(sis5513_ide_init); 630module_exit(sis5513_ide_exit); 631 632MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik"); 633MODULE_DESCRIPTION("PCI driver module for SIS IDE"); 634MODULE_LICENSE("GPL"); 635