1#
2# Multimedia device configuration
3#
4
5menuconfig MEDIA_SUPPORT
6	tristate "Multimedia support"
7	depends on HAS_IOMEM
8	help
9	  If you want to use Webcams, Video grabber devices and/or TV devices
10	  enable this option and other options below.
11	  Additional info and docs are available on the web at
12	  <http://linuxtv.org>
13
14if MEDIA_SUPPORT
15
16comment "Multimedia core support"
17
18#
19# Multimedia support - automatically enable V4L2 and DVB core
20#
21config MEDIA_CAMERA_SUPPORT
22	bool "Cameras/video grabbers support"
23	---help---
24	  Enable support for webcams and video grabbers.
25
26	  Say Y when you have a webcam or a video capture grabber board.
27
28config MEDIA_ANALOG_TV_SUPPORT
29	bool "Analog TV support"
30	---help---
31	  Enable analog TV support.
32
33	  Say Y when you have a TV board with analog support or with a
34	  hybrid analog/digital TV chipset.
35
36	  Note: There are several DVB cards that are based on chips that
37		support both analog and digital TV. Disabling this option
38		will disable support for them.
39
40config MEDIA_DIGITAL_TV_SUPPORT
41	bool "Digital TV support"
42	---help---
43	  Enable digital TV support.
44
45	  Say Y when you have a board with digital support or a board with
46	  hybrid digital TV and analog TV.
47
48config MEDIA_RADIO_SUPPORT
49	bool "AM/FM radio receivers/transmitters support"
50	---help---
51	  Enable AM/FM radio support.
52
53	  Additional info and docs are available on the web at
54	  <http://linuxtv.org>
55
56	  Say Y when you have a board with radio support.
57
58	  Note: There are several TV cards that are based on chips that
59		support radio reception. Disabling this option will
60		disable support for them.
61
62config MEDIA_SDR_SUPPORT
63	bool "Software defined radio support"
64	---help---
65	  Enable software defined radio support.
66
67	  Say Y when you have a software defined radio device.
68
69config MEDIA_RC_SUPPORT
70	bool "Remote Controller support"
71	depends on INPUT
72	---help---
73	  Enable support for Remote Controllers on Linux. This is
74	  needed in order to support several video capture adapters,
75	  standalone IR receivers/transmitters, and RF receivers.
76
77	  Enable this option if you have a video capture board even
78	  if you don't need IR, as otherwise, you may not be able to
79	  compile the driver for your adapter.
80
81	  Say Y when you have a TV or an IR device.
82
83#
84# Media controller
85#	Selectable only for webcam/grabbers, as other drivers don't use it
86#
87
88config MEDIA_CONTROLLER
89	bool "Media Controller API"
90	depends on MEDIA_CAMERA_SUPPORT
91	---help---
92	  Enable the media controller API used to query media devices internal
93	  topology and configure it dynamically.
94
95	  This API is mostly used by camera interfaces in embedded platforms.
96
97#
98# Video4Linux support
99#	Only enables if one of the V4L2 types (ATV, webcam, radio) is selected
100#
101
102config VIDEO_DEV
103	tristate
104	depends on MEDIA_SUPPORT
105	depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
106	default y
107
108config VIDEO_V4L2_SUBDEV_API
109	bool "V4L2 sub-device userspace API"
110	depends on VIDEO_DEV && MEDIA_CONTROLLER
111	---help---
112	  Enables the V4L2 sub-device pad-level userspace API used to configure
113	  video format, size and frame rate between hardware blocks.
114
115	  This API is mostly used by camera interfaces in embedded platforms.
116
117source "drivers/media/v4l2-core/Kconfig"
118
119#
120# DVB Core
121#	Only enables if one of DTV is selected
122#
123
124config DVB_CORE
125	tristate
126	depends on MEDIA_SUPPORT
127	depends on MEDIA_DIGITAL_TV_SUPPORT
128	default y
129	select CRC32
130
131config DVB_NET
132	bool "DVB Network Support"
133	default (NET && INET)
134	depends on NET && INET && DVB_CORE
135	help
136	  This option enables DVB Network Support which is a part of the DVB
137	  standard. It is used, for example, by automatic firmware updates used
138	  on Set-Top-Boxes. It can also be used to access the Internet via the
139	  DVB card, if the network provider supports it.
140
141	  You may want to disable the network support on embedded devices. If
142	  unsure say Y.
143
144# This Kconfig option is used by both PCI and USB drivers
145config TTPCI_EEPROM
146	tristate
147	depends on I2C
148	default n
149
150source "drivers/media/dvb-core/Kconfig"
151
152comment "Media drivers"
153source "drivers/media/rc/Kconfig"
154
155#
156# V4L platform/mem2mem drivers
157#
158
159source "drivers/media/usb/Kconfig"
160source "drivers/media/pci/Kconfig"
161source "drivers/media/platform/Kconfig"
162source "drivers/media/mmc/Kconfig"
163source "drivers/media/parport/Kconfig"
164source "drivers/media/radio/Kconfig"
165
166comment "Supported FireWire (IEEE 1394) Adapters"
167	depends on DVB_CORE && FIREWIRE
168source "drivers/media/firewire/Kconfig"
169
170# Common driver options
171source "drivers/media/common/Kconfig"
172
173comment "Media ancillary drivers (tuners, sensors, i2c, frontends)"
174
175#
176# Ancillary drivers (tuners, i2c, frontends)
177#
178
179config MEDIA_SUBDRV_AUTOSELECT
180	bool "Autoselect ancillary drivers (tuners, sensors, i2c, frontends)"
181	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT
182	depends on HAS_IOMEM
183	select I2C
184	select I2C_MUX
185	default y
186	help
187	  By default, a media driver auto-selects all possible ancillary
188	  devices such as tuners, sensors, video encoders/decoders and
189	  frontends, that are used by any of the supported devices.
190
191	  This is generally the right thing to do, except when there
192	  are strict constraints with regards to the kernel size,
193	  like on embedded systems.
194
195	  Use this option with care, as deselecting ancillary drivers which
196	  are, in fact, necessary will result in the lack of the needed
197	  functionality for your device (it may not tune or may not have
198	  the needed demodulators).
199
200	  If unsure say Y.
201
202config MEDIA_ATTACH
203	bool
204	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
205	depends on MODULES
206	default MODULES
207
208source "drivers/media/i2c/Kconfig"
209source "drivers/media/tuners/Kconfig"
210source "drivers/media/dvb-frontends/Kconfig"
211
212endif # MEDIA_SUPPORT
213