m5mols_core.c revision 07e0e5b287421fcc4f4dbe2c0c8bfbc02e23a51e
1/* 2 * Driver for M-5MOLS 8M Pixel camera sensor with ISP 3 * 4 * Copyright (C) 2011 Samsung Electronics Co., Ltd. 5 * Author: HeungJun Kim <riverful.kim@samsung.com> 6 * 7 * Copyright (C) 2009 Samsung Electronics Co., Ltd. 8 * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 */ 15 16#include <linux/i2c.h> 17#include <linux/slab.h> 18#include <linux/irq.h> 19#include <linux/interrupt.h> 20#include <linux/delay.h> 21#include <linux/gpio.h> 22#include <linux/regulator/consumer.h> 23#include <linux/videodev2.h> 24#include <linux/module.h> 25#include <media/v4l2-ctrls.h> 26#include <media/v4l2-device.h> 27#include <media/v4l2-subdev.h> 28#include <media/m5mols.h> 29 30#include "m5mols.h" 31#include "m5mols_reg.h" 32 33int m5mols_debug; 34module_param(m5mols_debug, int, 0644); 35 36#define MODULE_NAME "M5MOLS" 37#define M5MOLS_I2C_CHECK_RETRY 500 38 39/* The regulator consumer names for external voltage regulators */ 40static struct regulator_bulk_data supplies[] = { 41 { 42 .supply = "core", /* ARM core power, 1.2V */ 43 }, { 44 .supply = "dig_18", /* digital power 1, 1.8V */ 45 }, { 46 .supply = "d_sensor", /* sensor power 1, 1.8V */ 47 }, { 48 .supply = "dig_28", /* digital power 2, 2.8V */ 49 }, { 50 .supply = "a_sensor", /* analog power */ 51 }, { 52 .supply = "dig_12", /* digital power 3, 1.2V */ 53 }, 54}; 55 56static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = { 57 [M5MOLS_RESTYPE_MONITOR] = { 58 .width = 1920, 59 .height = 1080, 60 .code = V4L2_MBUS_FMT_VYUY8_2X8, 61 .field = V4L2_FIELD_NONE, 62 .colorspace = V4L2_COLORSPACE_JPEG, 63 }, 64 [M5MOLS_RESTYPE_CAPTURE] = { 65 .width = 1920, 66 .height = 1080, 67 .code = V4L2_MBUS_FMT_JPEG_1X8, 68 .field = V4L2_FIELD_NONE, 69 .colorspace = V4L2_COLORSPACE_JPEG, 70 }, 71}; 72#define SIZE_DEFAULT_FFMT ARRAY_SIZE(m5mols_default_ffmt) 73 74static const struct m5mols_resolution m5mols_reg_res[] = { 75 { 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 }, /* SUB-QCIF */ 76 { 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 }, /* QQVGA */ 77 { 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 }, /* QCIF */ 78 { 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 }, 79 { 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 }, /* QVGA */ 80 { 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 }, /* QVGA */ 81 { 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 }, /* WQVGA */ 82 { 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 }, /* WQVGA */ 83 { 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 }, /* CIF */ 84 { 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 }, 85 { 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 }, /* qHD */ 86 { 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 }, /* VGA */ 87 { 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 }, 88 { 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 }, /* WVGA */ 89 { 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 }, /* SVGA */ 90 { 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 }, /* HD */ 91 { 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 }, /* 1080p */ 92 { 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 }, /* 2.63fps 8M */ 93 { 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 }, /* AHS_MON debug */ 94 95 { 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 }, /* QVGA */ 96 { 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 }, /* WQVGA */ 97 { 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 }, 98 { 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 }, /* qHD */ 99 { 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 }, /* VGA */ 100 { 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 }, /* WVGA */ 101 { 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 }, /* HD */ 102 { 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 }, /* 1M */ 103 { 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 }, /* 2M */ 104 { 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 }, /* Full-HD */ 105 { 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 }, /* 3Mega */ 106 { 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 }, 107 { 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 }, /* 4Mega */ 108 { 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 }, 109 { 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 }, /* 5Mega */ 110 { 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 }, /* 6Mega */ 111 { 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 }, 112 { 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 }, /* 8Mega */ 113}; 114 115/** 116 * m5mols_swap_byte - an byte array to integer conversion function 117 * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet 118 * 119 * Convert I2C data byte array with performing any required byte 120 * reordering to assure proper values for each data type, regardless 121 * of the architecture endianness. 122 */ 123static u32 m5mols_swap_byte(u8 *data, u8 length) 124{ 125 if (length == 1) 126 return *data; 127 else if (length == 2) 128 return be16_to_cpu(*((u16 *)data)); 129 else 130 return be32_to_cpu(*((u32 *)data)); 131} 132 133/** 134 * m5mols_read - I2C read function 135 * @reg: combination of size, category and command for the I2C packet 136 * @size: desired size of I2C packet 137 * @val: read value 138 * 139 * Returns 0 on success, or else negative errno. 140 */ 141static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val) 142{ 143 struct i2c_client *client = v4l2_get_subdevdata(sd); 144 struct m5mols_info *info = to_m5mols(sd); 145 u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; 146 u8 category = I2C_CATEGORY(reg); 147 u8 cmd = I2C_COMMAND(reg); 148 struct i2c_msg msg[2]; 149 u8 wbuf[5]; 150 int ret; 151 152 if (!client->adapter) 153 return -ENODEV; 154 155 msg[0].addr = client->addr; 156 msg[0].flags = 0; 157 msg[0].len = 5; 158 msg[0].buf = wbuf; 159 wbuf[0] = 5; 160 wbuf[1] = M5MOLS_BYTE_READ; 161 wbuf[2] = category; 162 wbuf[3] = cmd; 163 wbuf[4] = size; 164 165 msg[1].addr = client->addr; 166 msg[1].flags = I2C_M_RD; 167 msg[1].len = size + 1; 168 msg[1].buf = rbuf; 169 170 /* minimum stabilization time */ 171 usleep_range(200, 200); 172 173 ret = i2c_transfer(client->adapter, msg, 2); 174 175 if (ret == 2) { 176 *val = m5mols_swap_byte(&rbuf[1], size); 177 return 0; 178 } 179 180 if (info->isp_ready) 181 v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n", 182 size, category, cmd, ret); 183 184 return ret < 0 ? ret : -EIO; 185} 186 187int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val) 188{ 189 u32 val_32; 190 int ret; 191 192 if (I2C_SIZE(reg) != 1) { 193 v4l2_err(sd, "Wrong data size\n"); 194 return -EINVAL; 195 } 196 197 ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); 198 if (ret) 199 return ret; 200 201 *val = (u8)val_32; 202 return ret; 203} 204 205int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val) 206{ 207 u32 val_32; 208 int ret; 209 210 if (I2C_SIZE(reg) != 2) { 211 v4l2_err(sd, "Wrong data size\n"); 212 return -EINVAL; 213 } 214 215 ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); 216 if (ret) 217 return ret; 218 219 *val = (u16)val_32; 220 return ret; 221} 222 223int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val) 224{ 225 if (I2C_SIZE(reg) != 4) { 226 v4l2_err(sd, "Wrong data size\n"); 227 return -EINVAL; 228 } 229 230 return m5mols_read(sd, I2C_SIZE(reg), reg, val); 231} 232 233/** 234 * m5mols_write - I2C command write function 235 * @reg: combination of size, category and command for the I2C packet 236 * @val: value to write 237 * 238 * Returns 0 on success, or else negative errno. 239 */ 240int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) 241{ 242 struct i2c_client *client = v4l2_get_subdevdata(sd); 243 struct m5mols_info *info = to_m5mols(sd); 244 u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4]; 245 u8 category = I2C_CATEGORY(reg); 246 u8 cmd = I2C_COMMAND(reg); 247 u8 size = I2C_SIZE(reg); 248 u32 *buf = (u32 *)&wbuf[4]; 249 struct i2c_msg msg[1]; 250 int ret; 251 252 if (!client->adapter) 253 return -ENODEV; 254 255 if (size != 1 && size != 2 && size != 4) { 256 v4l2_err(sd, "Wrong data size\n"); 257 return -EINVAL; 258 } 259 260 msg->addr = client->addr; 261 msg->flags = 0; 262 msg->len = (u16)size + 4; 263 msg->buf = wbuf; 264 wbuf[0] = size + 4; 265 wbuf[1] = M5MOLS_BYTE_WRITE; 266 wbuf[2] = category; 267 wbuf[3] = cmd; 268 269 *buf = m5mols_swap_byte((u8 *)&val, size); 270 271 usleep_range(200, 200); 272 273 ret = i2c_transfer(client->adapter, msg, 1); 274 if (ret == 1) 275 return 0; 276 277 if (info->isp_ready) 278 v4l2_err(sd, "write failed: cat:%02x cmd:%02x ret:%d\n", 279 category, cmd, ret); 280 281 return ret < 0 ? ret : -EIO; 282} 283 284/** 285 * m5mols_busy_wait - Busy waiting with I2C register polling 286 * @reg: the I2C_REG() address of an 8-bit status register to check 287 * @value: expected status register value 288 * @mask: bit mask for the read status register value 289 * @timeout: timeout in miliseconds, or -1 for default timeout 290 * 291 * The @reg register value is ORed with @mask before comparing with @value. 292 * 293 * Return: 0 if the requested condition became true within less than 294 * @timeout ms, or else negative errno. 295 */ 296int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, 297 int timeout) 298{ 299 int ms = timeout < 0 ? M5MOLS_BUSY_WAIT_DEF_TIMEOUT : timeout; 300 unsigned long end = jiffies + msecs_to_jiffies(ms); 301 u8 status; 302 303 do { 304 int ret = m5mols_read_u8(sd, reg, &status); 305 306 if (ret < 0 && !(mask & M5MOLS_I2C_RDY_WAIT_FL)) 307 return ret; 308 if (!ret && (status & mask & 0xff) == (value & 0xff)) 309 return 0; 310 usleep_range(100, 250); 311 } while (ms > 0 && time_is_after_jiffies(end)); 312 313 return -EBUSY; 314} 315 316/** 317 * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts 318 * 319 * Before writing desired interrupt value the INT_FACTOR register should 320 * be read to clear pending interrupts. 321 */ 322int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg) 323{ 324 struct m5mols_info *info = to_m5mols(sd); 325 u8 mask = is_available_af(info) ? REG_INT_AF : 0; 326 u8 dummy; 327 int ret; 328 329 ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy); 330 if (!ret) 331 ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); 332 return ret; 333} 334 335int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout) 336{ 337 struct m5mols_info *info = to_m5mols(sd); 338 339 int ret = wait_event_interruptible_timeout(info->irq_waitq, 340 atomic_add_unless(&info->irq_done, -1, 0), 341 msecs_to_jiffies(timeout)); 342 if (ret <= 0) 343 return ret ? ret : -ETIMEDOUT; 344 345 return m5mols_busy_wait(sd, SYSTEM_INT_FACTOR, irq_mask, 346 M5MOLS_I2C_RDY_WAIT_FL | irq_mask, -1); 347} 348 349/** 350 * m5mols_reg_mode - Write the mode and check busy status 351 * 352 * It always accompanies a little delay changing the M-5MOLS mode, so it is 353 * needed checking current busy status to guarantee right mode. 354 */ 355static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) 356{ 357 int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); 358 if (ret < 0) 359 return ret; 360 return m5mols_busy_wait(sd, SYSTEM_SYSMODE, mode, 0xff, 361 M5MOLS_MODE_CHANGE_TIMEOUT); 362} 363 364/** 365 * m5mols_set_mode - set the M-5MOLS controller mode 366 * @mode: the required operation mode 367 * 368 * The commands of M-5MOLS are grouped into specific modes. Each functionality 369 * can be guaranteed only when the sensor is operating in mode which a command 370 * belongs to. 371 */ 372int m5mols_set_mode(struct m5mols_info *info, u8 mode) 373{ 374 struct v4l2_subdev *sd = &info->sd; 375 int ret = -EINVAL; 376 u8 reg; 377 378 if (mode < REG_PARAMETER || mode > REG_CAPTURE) 379 return ret; 380 381 ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); 382 if (ret || reg == mode) 383 return ret; 384 385 switch (reg) { 386 case REG_PARAMETER: 387 ret = m5mols_reg_mode(sd, REG_MONITOR); 388 if (mode == REG_MONITOR) 389 break; 390 if (!ret) 391 ret = m5mols_reg_mode(sd, REG_CAPTURE); 392 break; 393 394 case REG_MONITOR: 395 if (mode == REG_PARAMETER) { 396 ret = m5mols_reg_mode(sd, REG_PARAMETER); 397 break; 398 } 399 400 ret = m5mols_reg_mode(sd, REG_CAPTURE); 401 break; 402 403 case REG_CAPTURE: 404 ret = m5mols_reg_mode(sd, REG_MONITOR); 405 if (mode == REG_MONITOR) 406 break; 407 if (!ret) 408 ret = m5mols_reg_mode(sd, REG_PARAMETER); 409 break; 410 411 default: 412 v4l2_warn(sd, "Wrong mode: %d\n", mode); 413 } 414 415 if (!ret) 416 info->mode = mode; 417 418 return ret; 419} 420 421/** 422 * m5mols_get_version - retrieve full revisions information of M-5MOLS 423 * 424 * The version information includes revisions of hardware and firmware, 425 * AutoFocus alghorithm version and the version string. 426 */ 427static int m5mols_get_version(struct v4l2_subdev *sd) 428{ 429 struct m5mols_info *info = to_m5mols(sd); 430 struct m5mols_version *ver = &info->ver; 431 u8 *str = ver->str; 432 int i; 433 int ret; 434 435 ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer); 436 if (!ret) 437 ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project); 438 if (!ret) 439 ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw); 440 if (!ret) 441 ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw); 442 if (!ret) 443 ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param); 444 if (!ret) 445 ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb); 446 if (!ret) 447 ret = m5mols_read_u8(sd, AF_VERSION, &ver->af); 448 if (ret) 449 return ret; 450 451 for (i = 0; i < VERSION_STRING_SIZE; i++) { 452 ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]); 453 if (ret) 454 return ret; 455 } 456 457 ver->fw = be16_to_cpu(ver->fw); 458 ver->hw = be16_to_cpu(ver->hw); 459 ver->param = be16_to_cpu(ver->param); 460 ver->awb = be16_to_cpu(ver->awb); 461 462 v4l2_info(sd, "Manufacturer\t[%s]\n", 463 is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? 464 "Samsung Electro-Machanics" : 465 is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 466 "Samsung Fiber-Optics" : 467 is_manufacturer(info, REG_SAMSUNG_TECHWIN) ? 468 "Samsung Techwin" : "None"); 469 v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n", 470 info->ver.customer, info->ver.project); 471 472 if (!is_available_af(info)) 473 v4l2_info(sd, "No support Auto Focus on this firmware\n"); 474 475 return ret; 476} 477 478/** 479 * __find_restype - Lookup M-5MOLS resolution type according to pixel code 480 * @code: pixel code 481 */ 482static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code) 483{ 484 enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR; 485 486 do { 487 if (code == m5mols_default_ffmt[type].code) 488 return type; 489 } while (type++ != SIZE_DEFAULT_FFMT); 490 491 return 0; 492} 493 494/** 495 * __find_resolution - Lookup preset and type of M-5MOLS's resolution 496 * @mf: pixel format to find/negotiate the resolution preset for 497 * @type: M-5MOLS resolution type 498 * @resolution: M-5MOLS resolution preset register value 499 * 500 * Find nearest resolution matching resolution preset and adjust mf 501 * to supported values. 502 */ 503static int __find_resolution(struct v4l2_subdev *sd, 504 struct v4l2_mbus_framefmt *mf, 505 enum m5mols_restype *type, 506 u32 *resolution) 507{ 508 const struct m5mols_resolution *fsize = &m5mols_reg_res[0]; 509 const struct m5mols_resolution *match = NULL; 510 enum m5mols_restype stype = __find_restype(mf->code); 511 int i = ARRAY_SIZE(m5mols_reg_res); 512 unsigned int min_err = ~0; 513 514 while (i--) { 515 int err; 516 if (stype == fsize->type) { 517 err = abs(fsize->width - mf->width) 518 + abs(fsize->height - mf->height); 519 520 if (err < min_err) { 521 min_err = err; 522 match = fsize; 523 } 524 } 525 fsize++; 526 } 527 if (match) { 528 mf->width = match->width; 529 mf->height = match->height; 530 *resolution = match->reg; 531 *type = stype; 532 return 0; 533 } 534 535 return -EINVAL; 536} 537 538static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info, 539 struct v4l2_subdev_fh *fh, 540 enum v4l2_subdev_format_whence which, 541 enum m5mols_restype type) 542{ 543 if (which == V4L2_SUBDEV_FORMAT_TRY) 544 return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL; 545 546 return &info->ffmt[type]; 547} 548 549static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, 550 struct v4l2_subdev_format *fmt) 551{ 552 struct m5mols_info *info = to_m5mols(sd); 553 struct v4l2_mbus_framefmt *format; 554 int ret = 0; 555 556 mutex_lock(&info->lock); 557 558 format = __find_format(info, fh, fmt->which, info->res_type); 559 if (format) 560 fmt->format = *format; 561 else 562 ret = -EINVAL; 563 564 mutex_unlock(&info->lock); 565 return ret; 566} 567 568static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, 569 struct v4l2_subdev_format *fmt) 570{ 571 struct m5mols_info *info = to_m5mols(sd); 572 struct v4l2_mbus_framefmt *format = &fmt->format; 573 struct v4l2_mbus_framefmt *sfmt; 574 enum m5mols_restype type; 575 u32 resolution = 0; 576 int ret; 577 578 ret = __find_resolution(sd, format, &type, &resolution); 579 if (ret < 0) 580 return ret; 581 582 sfmt = __find_format(info, fh, fmt->which, type); 583 if (!sfmt) 584 return 0; 585 586 mutex_lock(&info->lock); 587 588 format->code = m5mols_default_ffmt[type].code; 589 format->colorspace = V4L2_COLORSPACE_JPEG; 590 format->field = V4L2_FIELD_NONE; 591 592 if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { 593 *sfmt = *format; 594 info->resolution = resolution; 595 info->res_type = type; 596 } 597 598 mutex_unlock(&info->lock); 599 return ret; 600} 601 602static int m5mols_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, 603 struct v4l2_mbus_frame_desc *fd) 604{ 605 struct m5mols_info *info = to_m5mols(sd); 606 607 if (pad != 0 || fd == NULL) 608 return -EINVAL; 609 610 mutex_lock(&info->lock); 611 /* 612 * .get_frame_desc is only used for compressed formats, 613 * thus we always return the capture frame parameters here. 614 */ 615 fd->entry[0].length = info->cap.buf_size; 616 fd->entry[0].pixelcode = info->ffmt[M5MOLS_RESTYPE_CAPTURE].code; 617 mutex_unlock(&info->lock); 618 619 fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; 620 fd->num_entries = 1; 621 622 return 0; 623} 624 625static int m5mols_set_frame_desc(struct v4l2_subdev *sd, unsigned int pad, 626 struct v4l2_mbus_frame_desc *fd) 627{ 628 struct m5mols_info *info = to_m5mols(sd); 629 struct v4l2_mbus_framefmt *mf = &info->ffmt[M5MOLS_RESTYPE_CAPTURE]; 630 631 if (pad != 0 || fd == NULL) 632 return -EINVAL; 633 634 fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; 635 fd->num_entries = 1; 636 fd->entry[0].length = clamp_t(u32, fd->entry[0].length, 637 mf->width * mf->height, 638 M5MOLS_MAIN_JPEG_SIZE_MAX); 639 mutex_lock(&info->lock); 640 info->cap.buf_size = fd->entry[0].length; 641 mutex_unlock(&info->lock); 642 643 return 0; 644} 645 646 647static int m5mols_enum_mbus_code(struct v4l2_subdev *sd, 648 struct v4l2_subdev_fh *fh, 649 struct v4l2_subdev_mbus_code_enum *code) 650{ 651 if (!code || code->index >= SIZE_DEFAULT_FFMT) 652 return -EINVAL; 653 654 code->code = m5mols_default_ffmt[code->index].code; 655 656 return 0; 657} 658 659static struct v4l2_subdev_pad_ops m5mols_pad_ops = { 660 .enum_mbus_code = m5mols_enum_mbus_code, 661 .get_fmt = m5mols_get_fmt, 662 .set_fmt = m5mols_set_fmt, 663 .get_frame_desc = m5mols_get_frame_desc, 664 .set_frame_desc = m5mols_set_frame_desc, 665}; 666 667/** 668 * m5mols_restore_controls - Apply current control values to the registers 669 * 670 * m5mols_do_scenemode() handles all parameters for which there is yet no 671 * individual control. It should be replaced at some point by setting each 672 * control individually, in required register set up order. 673 */ 674int m5mols_restore_controls(struct m5mols_info *info) 675{ 676 int ret; 677 678 if (info->ctrl_sync) 679 return 0; 680 681 ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL); 682 if (ret) 683 return ret; 684 685 ret = v4l2_ctrl_handler_setup(&info->handle); 686 info->ctrl_sync = !ret; 687 688 return ret; 689} 690 691/** 692 * m5mols_start_monitor - Start the monitor mode 693 * 694 * Before applying the controls setup the resolution and frame rate 695 * in PARAMETER mode, and then switch over to MONITOR mode. 696 */ 697static int m5mols_start_monitor(struct m5mols_info *info) 698{ 699 struct v4l2_subdev *sd = &info->sd; 700 int ret; 701 702 ret = m5mols_set_mode(info, REG_PARAMETER); 703 if (!ret) 704 ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution); 705 if (!ret) 706 ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30); 707 if (!ret) 708 ret = m5mols_set_mode(info, REG_MONITOR); 709 if (!ret) 710 ret = m5mols_restore_controls(info); 711 712 return ret; 713} 714 715static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) 716{ 717 struct m5mols_info *info = to_m5mols(sd); 718 u32 code; 719 int ret; 720 721 mutex_lock(&info->lock); 722 code = info->ffmt[info->res_type].code; 723 724 if (enable) { 725 if (is_code(code, M5MOLS_RESTYPE_MONITOR)) 726 ret = m5mols_start_monitor(info); 727 else if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) 728 ret = m5mols_start_capture(info); 729 else 730 ret = -EINVAL; 731 } else { 732 ret = m5mols_set_mode(info, REG_PARAMETER); 733 } 734 735 mutex_unlock(&info->lock); 736 return ret; 737} 738 739static const struct v4l2_subdev_video_ops m5mols_video_ops = { 740 .s_stream = m5mols_s_stream, 741}; 742 743static int m5mols_sensor_power(struct m5mols_info *info, bool enable) 744{ 745 struct v4l2_subdev *sd = &info->sd; 746 struct i2c_client *client = v4l2_get_subdevdata(sd); 747 const struct m5mols_platform_data *pdata = info->pdata; 748 int ret; 749 750 if (info->power == enable) 751 return 0; 752 753 if (enable) { 754 if (info->set_power) { 755 ret = info->set_power(&client->dev, 1); 756 if (ret) 757 return ret; 758 } 759 760 ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); 761 if (ret) { 762 info->set_power(&client->dev, 0); 763 return ret; 764 } 765 766 gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity); 767 info->power = 1; 768 769 return ret; 770 } 771 772 ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); 773 if (ret) 774 return ret; 775 776 if (info->set_power) 777 info->set_power(&client->dev, 0); 778 779 gpio_set_value(pdata->gpio_reset, pdata->reset_polarity); 780 781 info->isp_ready = 0; 782 info->power = 0; 783 784 return ret; 785} 786 787/* m5mols_update_fw - optional firmware update routine */ 788int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd, 789 int (*set_power)(struct m5mols_info *, bool)) 790{ 791 return 0; 792} 793 794/** 795 * m5mols_fw_start - M-5MOLS internal ARM controller initialization 796 * 797 * Execute the M-5MOLS internal ARM controller initialization sequence. 798 * This function should be called after the supply voltage has been 799 * applied and before any requests to the device are made. 800 */ 801static int m5mols_fw_start(struct v4l2_subdev *sd) 802{ 803 struct m5mols_info *info = to_m5mols(sd); 804 int ret; 805 806 atomic_set(&info->irq_done, 0); 807 /* Wait until I2C slave is initialized in Flash Writer mode */ 808 ret = m5mols_busy_wait(sd, FLASH_CAM_START, REG_IN_FLASH_MODE, 809 M5MOLS_I2C_RDY_WAIT_FL | 0xff, -1); 810 if (!ret) 811 ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT); 812 if (!ret) 813 ret = m5mols_wait_interrupt(sd, REG_INT_MODE, 2000); 814 if (ret < 0) 815 return ret; 816 817 info->isp_ready = 1; 818 819 ret = m5mols_get_version(sd); 820 if (!ret) 821 ret = m5mols_update_fw(sd, m5mols_sensor_power); 822 if (ret) 823 return ret; 824 825 v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n"); 826 827 ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI); 828 if (!ret) 829 ret = m5mols_enable_interrupt(sd, 830 REG_INT_AF | REG_INT_CAPTURE); 831 832 return ret; 833} 834 835/* Execute the lens soft-landing algorithm */ 836static int m5mols_auto_focus_stop(struct m5mols_info *info) 837{ 838 int ret; 839 840 ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); 841 if (!ret) 842 ret = m5mols_write(&info->sd, AF_MODE, REG_AF_POWEROFF); 843 if (!ret) 844 ret = m5mols_busy_wait(&info->sd, SYSTEM_STATUS, REG_AF_IDLE, 845 0xff, -1); 846 return ret; 847} 848 849/** 850 * m5mols_s_power - Main sensor power control function 851 * 852 * To prevent breaking the lens when the sensor is powered off the Soft-Landing 853 * algorithm is called where available. The Soft-Landing algorithm availability 854 * dependends on the firmware provider. 855 */ 856static int m5mols_s_power(struct v4l2_subdev *sd, int on) 857{ 858 struct m5mols_info *info = to_m5mols(sd); 859 int ret; 860 861 mutex_lock(&info->lock); 862 863 if (on) { 864 ret = m5mols_sensor_power(info, true); 865 if (!ret) 866 ret = m5mols_fw_start(sd); 867 } else { 868 if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { 869 ret = m5mols_set_mode(info, REG_MONITOR); 870 if (!ret) 871 ret = m5mols_auto_focus_stop(info); 872 if (ret < 0) 873 v4l2_warn(sd, "Soft landing lens failed\n"); 874 } 875 ret = m5mols_sensor_power(info, false); 876 877 info->ctrl_sync = 0; 878 } 879 880 mutex_unlock(&info->lock); 881 return ret; 882} 883 884static int m5mols_log_status(struct v4l2_subdev *sd) 885{ 886 struct m5mols_info *info = to_m5mols(sd); 887 888 v4l2_ctrl_handler_log_status(&info->handle, sd->name); 889 890 return 0; 891} 892 893static const struct v4l2_subdev_core_ops m5mols_core_ops = { 894 .s_power = m5mols_s_power, 895 .log_status = m5mols_log_status, 896}; 897 898/* 899 * V4L2 subdev internal operations 900 */ 901static int m5mols_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 902{ 903 struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); 904 905 *format = m5mols_default_ffmt[0]; 906 return 0; 907} 908 909static const struct v4l2_subdev_internal_ops m5mols_subdev_internal_ops = { 910 .open = m5mols_open, 911}; 912 913static const struct v4l2_subdev_ops m5mols_ops = { 914 .core = &m5mols_core_ops, 915 .pad = &m5mols_pad_ops, 916 .video = &m5mols_video_ops, 917}; 918 919static irqreturn_t m5mols_irq_handler(int irq, void *data) 920{ 921 struct m5mols_info *info = to_m5mols(data); 922 923 atomic_set(&info->irq_done, 1); 924 wake_up_interruptible(&info->irq_waitq); 925 926 return IRQ_HANDLED; 927} 928 929static int m5mols_probe(struct i2c_client *client, 930 const struct i2c_device_id *id) 931{ 932 const struct m5mols_platform_data *pdata = client->dev.platform_data; 933 unsigned long gpio_flags; 934 struct m5mols_info *info; 935 struct v4l2_subdev *sd; 936 int ret; 937 938 if (pdata == NULL) { 939 dev_err(&client->dev, "No platform data\n"); 940 return -EINVAL; 941 } 942 943 if (!gpio_is_valid(pdata->gpio_reset)) { 944 dev_err(&client->dev, "No valid RESET GPIO specified\n"); 945 return -EINVAL; 946 } 947 948 if (!client->irq) { 949 dev_err(&client->dev, "Interrupt not assigned\n"); 950 return -EINVAL; 951 } 952 953 info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); 954 if (!info) 955 return -ENOMEM; 956 957 info->pdata = pdata; 958 info->set_power = pdata->set_power; 959 960 gpio_flags = pdata->reset_polarity 961 ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; 962 ret = devm_gpio_request_one(&client->dev, pdata->gpio_reset, gpio_flags, 963 "M5MOLS_NRST"); 964 if (ret) { 965 dev_err(&client->dev, "Failed to request gpio: %d\n", ret); 966 return ret; 967 } 968 969 ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), 970 supplies); 971 if (ret) { 972 dev_err(&client->dev, "Failed to get regulators: %d\n", ret); 973 return ret; 974 } 975 976 sd = &info->sd; 977 v4l2_i2c_subdev_init(sd, client, &m5mols_ops); 978 strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); 979 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 980 981 sd->internal_ops = &m5mols_subdev_internal_ops; 982 info->pad.flags = MEDIA_PAD_FL_SOURCE; 983 ret = media_entity_init(&sd->entity, 1, &info->pad, 0); 984 if (ret < 0) 985 return ret; 986 sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; 987 988 init_waitqueue_head(&info->irq_waitq); 989 mutex_init(&info->lock); 990 991 ret = request_irq(client->irq, m5mols_irq_handler, 992 IRQF_TRIGGER_RISING, MODULE_NAME, sd); 993 if (ret) { 994 dev_err(&client->dev, "Interrupt request failed: %d\n", ret); 995 goto out_me; 996 } 997 info->res_type = M5MOLS_RESTYPE_MONITOR; 998 info->ffmt[0] = m5mols_default_ffmt[0]; 999 info->ffmt[1] = m5mols_default_ffmt[1]; 1000 1001 ret = m5mols_sensor_power(info, true); 1002 if (ret) 1003 goto out_irq; 1004 1005 ret = m5mols_fw_start(sd); 1006 if (!ret) 1007 ret = m5mols_init_controls(sd); 1008 1009 ret = m5mols_sensor_power(info, false); 1010 if (!ret) 1011 return 0; 1012out_irq: 1013 free_irq(client->irq, sd); 1014out_me: 1015 media_entity_cleanup(&sd->entity); 1016 return ret; 1017} 1018 1019static int m5mols_remove(struct i2c_client *client) 1020{ 1021 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1022 1023 v4l2_device_unregister_subdev(sd); 1024 v4l2_ctrl_handler_free(sd->ctrl_handler); 1025 free_irq(client->irq, sd); 1026 1027 media_entity_cleanup(&sd->entity); 1028 1029 return 0; 1030} 1031 1032static const struct i2c_device_id m5mols_id[] = { 1033 { MODULE_NAME, 0 }, 1034 { }, 1035}; 1036MODULE_DEVICE_TABLE(i2c, m5mols_id); 1037 1038static struct i2c_driver m5mols_i2c_driver = { 1039 .driver = { 1040 .name = MODULE_NAME, 1041 }, 1042 .probe = m5mols_probe, 1043 .remove = m5mols_remove, 1044 .id_table = m5mols_id, 1045}; 1046 1047module_i2c_driver(m5mols_i2c_driver); 1048 1049MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); 1050MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>"); 1051MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver"); 1052MODULE_LICENSE("GPL"); 1053