r820t.c revision 064fd169c508ce20e35babdd82946dab7219ccc5
1/* 2 * Rafael Micro R820T driver 3 * 4 * Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@redhat.com> 5 * 6 * This driver was written from scratch, based on an existing driver 7 * that it is part of rtl-sdr git tree, released under GPLv2: 8 * https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug 9 * https://github.com/n1gp/gr-baz 10 * 11 * From what I understood from the threads, the original driver was converted 12 * to userspace from a Realtek tree. I couldn't find the original tree. 13 * However, the original driver look awkward on my eyes. So, I decided to 14 * write a new version from it from the scratch, while trying to reproduce 15 * everything found there. 16 * 17 * TODO: 18 * After locking, the original driver seems to have some routines to 19 * improve reception. This was not implemented here yet. 20 * 21 * RF Gain set/get is not implemented. 22 * 23 * This program is free software; you can redistribute it and/or modify 24 * it under the terms of the GNU General Public License as published by 25 * the Free Software Foundation; either version 2 of the License, or 26 * (at your option) any later version. 27 * 28 * This program is distributed in the hope that it will be useful, 29 * but WITHOUT ANY WARRANTY; without even the implied warranty of 30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 31 * GNU General Public License for more details. 32 * 33 */ 34 35#include <linux/videodev2.h> 36#include <linux/mutex.h> 37#include <linux/slab.h> 38#include <linux/bitrev.h> 39#include <asm/div64.h> 40 41#include "tuner-i2c.h" 42#include "r820t.h" 43 44/* 45 * FIXME: I think that there are only 32 registers, but better safe than 46 * sorry. After finishing the driver, we may review it. 47 */ 48#define REG_SHADOW_START 5 49#define NUM_REGS 27 50#define NUM_IMR 5 51#define IMR_TRIAL 9 52 53#define VER_NUM 49 54 55static int debug; 56module_param(debug, int, 0644); 57MODULE_PARM_DESC(debug, "enable verbose debug messages"); 58 59static int no_imr_cal; 60module_param(no_imr_cal, int, 0444); 61MODULE_PARM_DESC(no_imr_cal, "Disable IMR calibration at module init"); 62 63 64/* 65 * enums and structures 66 */ 67 68enum xtal_cap_value { 69 XTAL_LOW_CAP_30P = 0, 70 XTAL_LOW_CAP_20P, 71 XTAL_LOW_CAP_10P, 72 XTAL_LOW_CAP_0P, 73 XTAL_HIGH_CAP_0P 74}; 75 76struct r820t_sect_type { 77 u8 phase_y; 78 u8 gain_x; 79 u16 value; 80}; 81 82struct r820t_priv { 83 struct list_head hybrid_tuner_instance_list; 84 const struct r820t_config *cfg; 85 struct tuner_i2c_props i2c_props; 86 struct mutex lock; 87 88 u8 regs[NUM_REGS]; 89 u8 buf[NUM_REGS + 1]; 90 enum xtal_cap_value xtal_cap_sel; 91 u16 pll; /* kHz */ 92 u32 int_freq; 93 u8 fil_cal_code; 94 bool imr_done; 95 bool has_lock; 96 bool init_done; 97 struct r820t_sect_type imr_data[NUM_IMR]; 98 99 /* Store current mode */ 100 u32 delsys; 101 enum v4l2_tuner_type type; 102 v4l2_std_id std; 103 u32 bw; /* in MHz */ 104}; 105 106struct r820t_freq_range { 107 u32 freq; 108 u8 open_d; 109 u8 rf_mux_ploy; 110 u8 tf_c; 111 u8 xtal_cap20p; 112 u8 xtal_cap10p; 113 u8 xtal_cap0p; 114 u8 imr_mem; /* Not used, currently */ 115}; 116 117#define VCO_POWER_REF 0x02 118#define DIP_FREQ 32000000 119 120/* 121 * Static constants 122 */ 123 124static LIST_HEAD(hybrid_tuner_instance_list); 125static DEFINE_MUTEX(r820t_list_mutex); 126 127/* Those initial values start from REG_SHADOW_START */ 128static const u8 r820t_init_array[NUM_REGS] = { 129 0x83, 0x32, 0x75, /* 05 to 07 */ 130 0xc0, 0x40, 0xd6, 0x6c, /* 08 to 0b */ 131 0xf5, 0x63, 0x75, 0x68, /* 0c to 0f */ 132 0x6c, 0x83, 0x80, 0x00, /* 10 to 13 */ 133 0x0f, 0x00, 0xc0, 0x30, /* 14 to 17 */ 134 0x48, 0xcc, 0x60, 0x00, /* 18 to 1b */ 135 0x54, 0xae, 0x4a, 0xc0 /* 1c to 1f */ 136}; 137 138/* Tuner frequency ranges */ 139static const struct r820t_freq_range freq_ranges[] = { 140 { 141 .freq = 0, 142 .open_d = 0x08, /* low */ 143 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 144 .tf_c = 0xdf, /* R27[7:0] band2,band0 */ 145 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 146 .xtal_cap10p = 0x01, 147 .xtal_cap0p = 0x00, 148 .imr_mem = 0, 149 }, { 150 .freq = 50, /* Start freq, in MHz */ 151 .open_d = 0x08, /* low */ 152 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 153 .tf_c = 0xbe, /* R27[7:0] band4,band1 */ 154 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 155 .xtal_cap10p = 0x01, 156 .xtal_cap0p = 0x00, 157 .imr_mem = 0, 158 }, { 159 .freq = 55, /* Start freq, in MHz */ 160 .open_d = 0x08, /* low */ 161 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 162 .tf_c = 0x8b, /* R27[7:0] band7,band4 */ 163 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 164 .xtal_cap10p = 0x01, 165 .xtal_cap0p = 0x00, 166 .imr_mem = 0, 167 }, { 168 .freq = 60, /* Start freq, in MHz */ 169 .open_d = 0x08, /* low */ 170 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 171 .tf_c = 0x7b, /* R27[7:0] band8,band4 */ 172 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 173 .xtal_cap10p = 0x01, 174 .xtal_cap0p = 0x00, 175 .imr_mem = 0, 176 }, { 177 .freq = 65, /* Start freq, in MHz */ 178 .open_d = 0x08, /* low */ 179 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 180 .tf_c = 0x69, /* R27[7:0] band9,band6 */ 181 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 182 .xtal_cap10p = 0x01, 183 .xtal_cap0p = 0x00, 184 .imr_mem = 0, 185 }, { 186 .freq = 70, /* Start freq, in MHz */ 187 .open_d = 0x08, /* low */ 188 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 189 .tf_c = 0x58, /* R27[7:0] band10,band7 */ 190 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 191 .xtal_cap10p = 0x01, 192 .xtal_cap0p = 0x00, 193 .imr_mem = 0, 194 }, { 195 .freq = 75, /* Start freq, in MHz */ 196 .open_d = 0x00, /* high */ 197 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 198 .tf_c = 0x44, /* R27[7:0] band11,band11 */ 199 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 200 .xtal_cap10p = 0x01, 201 .xtal_cap0p = 0x00, 202 .imr_mem = 0, 203 }, { 204 .freq = 80, /* Start freq, in MHz */ 205 .open_d = 0x00, /* high */ 206 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 207 .tf_c = 0x44, /* R27[7:0] band11,band11 */ 208 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 209 .xtal_cap10p = 0x01, 210 .xtal_cap0p = 0x00, 211 .imr_mem = 0, 212 }, { 213 .freq = 90, /* Start freq, in MHz */ 214 .open_d = 0x00, /* high */ 215 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 216 .tf_c = 0x34, /* R27[7:0] band12,band11 */ 217 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 218 .xtal_cap10p = 0x01, 219 .xtal_cap0p = 0x00, 220 .imr_mem = 0, 221 }, { 222 .freq = 100, /* Start freq, in MHz */ 223 .open_d = 0x00, /* high */ 224 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 225 .tf_c = 0x34, /* R27[7:0] band12,band11 */ 226 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 227 .xtal_cap10p = 0x01, 228 .xtal_cap0p = 0x00, 229 .imr_mem = 0, 230 }, { 231 .freq = 110, /* Start freq, in MHz */ 232 .open_d = 0x00, /* high */ 233 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 234 .tf_c = 0x24, /* R27[7:0] band13,band11 */ 235 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 236 .xtal_cap10p = 0x01, 237 .xtal_cap0p = 0x00, 238 .imr_mem = 1, 239 }, { 240 .freq = 120, /* Start freq, in MHz */ 241 .open_d = 0x00, /* high */ 242 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 243 .tf_c = 0x24, /* R27[7:0] band13,band11 */ 244 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 245 .xtal_cap10p = 0x01, 246 .xtal_cap0p = 0x00, 247 .imr_mem = 1, 248 }, { 249 .freq = 140, /* Start freq, in MHz */ 250 .open_d = 0x00, /* high */ 251 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 252 .tf_c = 0x14, /* R27[7:0] band14,band11 */ 253 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 254 .xtal_cap10p = 0x01, 255 .xtal_cap0p = 0x00, 256 .imr_mem = 1, 257 }, { 258 .freq = 180, /* Start freq, in MHz */ 259 .open_d = 0x00, /* high */ 260 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 261 .tf_c = 0x13, /* R27[7:0] band14,band12 */ 262 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 263 .xtal_cap10p = 0x00, 264 .xtal_cap0p = 0x00, 265 .imr_mem = 1, 266 }, { 267 .freq = 220, /* Start freq, in MHz */ 268 .open_d = 0x00, /* high */ 269 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 270 .tf_c = 0x13, /* R27[7:0] band14,band12 */ 271 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 272 .xtal_cap10p = 0x00, 273 .xtal_cap0p = 0x00, 274 .imr_mem = 2, 275 }, { 276 .freq = 250, /* Start freq, in MHz */ 277 .open_d = 0x00, /* high */ 278 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 279 .tf_c = 0x11, /* R27[7:0] highest,highest */ 280 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 281 .xtal_cap10p = 0x00, 282 .xtal_cap0p = 0x00, 283 .imr_mem = 2, 284 }, { 285 .freq = 280, /* Start freq, in MHz */ 286 .open_d = 0x00, /* high */ 287 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 288 .tf_c = 0x00, /* R27[7:0] highest,highest */ 289 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 290 .xtal_cap10p = 0x00, 291 .xtal_cap0p = 0x00, 292 .imr_mem = 2, 293 }, { 294 .freq = 310, /* Start freq, in MHz */ 295 .open_d = 0x00, /* high */ 296 .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ 297 .tf_c = 0x00, /* R27[7:0] highest,highest */ 298 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 299 .xtal_cap10p = 0x00, 300 .xtal_cap0p = 0x00, 301 .imr_mem = 2, 302 }, { 303 .freq = 450, /* Start freq, in MHz */ 304 .open_d = 0x00, /* high */ 305 .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ 306 .tf_c = 0x00, /* R27[7:0] highest,highest */ 307 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 308 .xtal_cap10p = 0x00, 309 .xtal_cap0p = 0x00, 310 .imr_mem = 3, 311 }, { 312 .freq = 588, /* Start freq, in MHz */ 313 .open_d = 0x00, /* high */ 314 .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ 315 .tf_c = 0x00, /* R27[7:0] highest,highest */ 316 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 317 .xtal_cap10p = 0x00, 318 .xtal_cap0p = 0x00, 319 .imr_mem = 3, 320 }, { 321 .freq = 650, /* Start freq, in MHz */ 322 .open_d = 0x00, /* high */ 323 .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ 324 .tf_c = 0x00, /* R27[7:0] highest,highest */ 325 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 326 .xtal_cap10p = 0x00, 327 .xtal_cap0p = 0x00, 328 .imr_mem = 4, 329 } 330}; 331 332static int r820t_xtal_capacitor[][2] = { 333 { 0x0b, XTAL_LOW_CAP_30P }, 334 { 0x02, XTAL_LOW_CAP_20P }, 335 { 0x01, XTAL_LOW_CAP_10P }, 336 { 0x00, XTAL_LOW_CAP_0P }, 337 { 0x10, XTAL_HIGH_CAP_0P }, 338}; 339 340/* 341 * measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm 342 * input power, for raw results see: 343 * http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/ 344 */ 345 346static const int r820t_lna_gain_steps[] = { 347 0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13 348}; 349 350static const int r820t_mixer_gain_steps[] = { 351 0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8 352}; 353 354/* 355 * I2C read/write code and shadow registers logic 356 */ 357static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val, 358 int len) 359{ 360 int r = reg - REG_SHADOW_START; 361 362 if (r < 0) { 363 len += r; 364 r = 0; 365 } 366 if (len <= 0) 367 return; 368 if (len > NUM_REGS) 369 len = NUM_REGS; 370 371 tuner_dbg("%s: prev reg=%02x len=%d: %*ph\n", 372 __func__, r + REG_SHADOW_START, len, len, val); 373 374 memcpy(&priv->regs[r], val, len); 375} 376 377static int r820t_write(struct r820t_priv *priv, u8 reg, const u8 *val, 378 int len) 379{ 380 int rc, size, pos = 0; 381 382 /* Store the shadow registers */ 383 shadow_store(priv, reg, val, len); 384 385 do { 386 if (len > priv->cfg->max_i2c_msg_len - 1) 387 size = priv->cfg->max_i2c_msg_len - 1; 388 else 389 size = len; 390 391 /* Fill I2C buffer */ 392 priv->buf[0] = reg; 393 memcpy(&priv->buf[1], &val[pos], size); 394 395 rc = tuner_i2c_xfer_send(&priv->i2c_props, priv->buf, size + 1); 396 if (rc != size + 1) { 397 tuner_info("%s: i2c wr failed=%d reg=%02x len=%d: %*ph\n", 398 __func__, rc, reg, size, size, &priv->buf[1]); 399 if (rc < 0) 400 return rc; 401 return -EREMOTEIO; 402 } 403 tuner_dbg("%s: i2c wr reg=%02x len=%d: %*ph\n", 404 __func__, reg, size, size, &priv->buf[1]); 405 406 reg += size; 407 len -= size; 408 pos += size; 409 } while (len > 0); 410 411 return 0; 412} 413 414static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val) 415{ 416 return r820t_write(priv, reg, &val, 1); 417} 418 419static int r820t_read_cache_reg(struct r820t_priv *priv, int reg) 420{ 421 reg -= REG_SHADOW_START; 422 423 if (reg >= 0 && reg < NUM_REGS) 424 return priv->regs[reg]; 425 else 426 return -EINVAL; 427} 428 429static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val, 430 u8 bit_mask) 431{ 432 int rc = r820t_read_cache_reg(priv, reg); 433 434 if (rc < 0) 435 return rc; 436 437 val = (rc & ~bit_mask) | (val & bit_mask); 438 439 return r820t_write(priv, reg, &val, 1); 440} 441 442static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len) 443{ 444 int rc, i; 445 u8 *p = &priv->buf[1]; 446 447 priv->buf[0] = reg; 448 449 rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, priv->buf, 1, p, len); 450 if (rc != len) { 451 tuner_info("%s: i2c rd failed=%d reg=%02x len=%d: %*ph\n", 452 __func__, rc, reg, len, len, p); 453 if (rc < 0) 454 return rc; 455 return -EREMOTEIO; 456 } 457 458 /* Copy data to the output buffer */ 459 for (i = 0; i < len; i++) 460 val[i] = bitrev8(p[i]); 461 462 tuner_dbg("%s: i2c rd reg=%02x len=%d: %*ph\n", 463 __func__, reg, len, len, val); 464 465 return 0; 466} 467 468/* 469 * r820t tuning logic 470 */ 471 472static int r820t_set_mux(struct r820t_priv *priv, u32 freq) 473{ 474 const struct r820t_freq_range *range; 475 int i, rc; 476 u8 val, reg08, reg09; 477 478 /* Get the proper frequency range */ 479 freq = freq / 1000000; 480 for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) { 481 if (freq < freq_ranges[i + 1].freq) 482 break; 483 } 484 range = &freq_ranges[i]; 485 486 tuner_dbg("set r820t range#%d for frequency %d MHz\n", i, freq); 487 488 /* Open Drain */ 489 rc = r820t_write_reg_mask(priv, 0x17, range->open_d, 0x08); 490 if (rc < 0) 491 return rc; 492 493 /* RF_MUX,Polymux */ 494 rc = r820t_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3); 495 if (rc < 0) 496 return rc; 497 498 /* TF BAND */ 499 rc = r820t_write_reg(priv, 0x1b, range->tf_c); 500 if (rc < 0) 501 return rc; 502 503 /* XTAL CAP & Drive */ 504 switch (priv->xtal_cap_sel) { 505 case XTAL_LOW_CAP_30P: 506 case XTAL_LOW_CAP_20P: 507 val = range->xtal_cap20p | 0x08; 508 break; 509 case XTAL_LOW_CAP_10P: 510 val = range->xtal_cap10p | 0x08; 511 break; 512 case XTAL_HIGH_CAP_0P: 513 val = range->xtal_cap0p | 0x00; 514 break; 515 default: 516 case XTAL_LOW_CAP_0P: 517 val = range->xtal_cap0p | 0x08; 518 break; 519 } 520 rc = r820t_write_reg_mask(priv, 0x10, val, 0x0b); 521 if (rc < 0) 522 return rc; 523 524 if (priv->imr_done) { 525 reg08 = priv->imr_data[range->imr_mem].gain_x; 526 reg09 = priv->imr_data[range->imr_mem].phase_y; 527 } else { 528 reg08 = 0; 529 reg09 = 0; 530 } 531 rc = r820t_write_reg_mask(priv, 0x08, reg08, 0x3f); 532 if (rc < 0) 533 return rc; 534 535 rc = r820t_write_reg_mask(priv, 0x09, reg09, 0x3f); 536 537 return rc; 538} 539 540static int r820t_set_pll(struct r820t_priv *priv, enum v4l2_tuner_type type, 541 u32 freq) 542{ 543 u64 tmp64, vco_freq; 544 int rc, i; 545 unsigned sleep_time = 10000; 546 u32 vco_fra; /* VCO contribution by SDM (kHz) */ 547 u32 vco_min = 1770000; 548 u32 vco_max = vco_min * 2; 549 u32 pll_ref; 550 u16 n_sdm = 2; 551 u16 sdm = 0; 552 u8 mix_div = 2; 553 u8 div_buf = 0; 554 u8 div_num = 0; 555 u8 refdiv2 = 0; 556 u8 ni, si, nint, vco_fine_tune, val; 557 u8 data[5]; 558 559 /* Frequency in kHz */ 560 freq = freq / 1000; 561 pll_ref = priv->cfg->xtal / 1000; 562 563 if ((priv->cfg->rafael_chip == CHIP_R620D) || 564 (priv->cfg->rafael_chip == CHIP_R828D) || 565 (priv->cfg->rafael_chip == CHIP_R828)) { 566 /* ref set refdiv2, reffreq = Xtal/2 on ATV application */ 567 if (type != V4L2_TUNER_DIGITAL_TV) { 568 pll_ref /= 2; 569 refdiv2 = 0x10; 570 sleep_time = 20000; 571 } 572 } else { 573 if (priv->cfg->xtal > 24000000) { 574 pll_ref /= 2; 575 refdiv2 = 0x10; 576 } 577 } 578 579 tuner_dbg("set r820t pll for frequency %d kHz = %d%s\n", 580 freq, pll_ref, refdiv2 ? " / 2" : ""); 581 582 rc = r820t_write_reg_mask(priv, 0x10, refdiv2, 0x10); 583 if (rc < 0) 584 return rc; 585 586 /* set pll autotune = 128kHz */ 587 rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); 588 if (rc < 0) 589 return rc; 590 591 /* set VCO current = 100 */ 592 rc = r820t_write_reg_mask(priv, 0x12, 0x80, 0xe0); 593 if (rc < 0) 594 return rc; 595 596 /* Calculate divider */ 597 while (mix_div <= 64) { 598 if (((freq * mix_div) >= vco_min) && 599 ((freq * mix_div) < vco_max)) { 600 div_buf = mix_div; 601 while (div_buf > 2) { 602 div_buf = div_buf >> 1; 603 div_num++; 604 } 605 break; 606 } 607 mix_div = mix_div << 1; 608 } 609 610 rc = r820t_read(priv, 0x00, data, sizeof(data)); 611 if (rc < 0) 612 return rc; 613 614 vco_fine_tune = (data[4] & 0x30) >> 4; 615 616 if (vco_fine_tune > VCO_POWER_REF) 617 div_num = div_num - 1; 618 else if (vco_fine_tune < VCO_POWER_REF) 619 div_num = div_num + 1; 620 621 rc = r820t_write_reg_mask(priv, 0x10, div_num << 5, 0xe0); 622 if (rc < 0) 623 return rc; 624 625 vco_freq = (u64)(freq * (u64)mix_div); 626 627 tmp64 = vco_freq; 628 do_div(tmp64, 2 * pll_ref); 629 nint = (u8)tmp64; 630 631 tmp64 = vco_freq - ((u64)2) * pll_ref * nint; 632 do_div(tmp64, 1000); 633 vco_fra = (u16)(tmp64); 634 635 /* boundary spur prevention */ 636 if (vco_fra < pll_ref / 64) { 637 vco_fra = 0; 638 } else if (vco_fra > pll_ref * 127 / 64) { 639 vco_fra = 0; 640 nint++; 641 } else if ((vco_fra > pll_ref * 127 / 128) && (vco_fra < pll_ref)) { 642 vco_fra = pll_ref * 127 / 128; 643 } else if ((vco_fra > pll_ref) && (vco_fra < pll_ref * 129 / 128)) { 644 vco_fra = pll_ref * 129 / 128; 645 } 646 647 if (nint > 63) { 648 tuner_info("No valid PLL values for %u kHz!\n", freq); 649 return -EINVAL; 650 } 651 652 ni = (nint - 13) / 4; 653 si = nint - 4 * ni - 13; 654 655 rc = r820t_write_reg(priv, 0x14, ni + (si << 6)); 656 if (rc < 0) 657 return rc; 658 659 /* pw_sdm */ 660 if (!vco_fra) 661 val = 0x08; 662 else 663 val = 0x00; 664 665 rc = r820t_write_reg_mask(priv, 0x12, val, 0x08); 666 if (rc < 0) 667 return rc; 668 669 /* sdm calculator */ 670 while (vco_fra > 1) { 671 if (vco_fra > (2 * pll_ref / n_sdm)) { 672 sdm = sdm + 32768 / (n_sdm / 2); 673 vco_fra = vco_fra - 2 * pll_ref / n_sdm; 674 if (n_sdm >= 0x8000) 675 break; 676 } 677 n_sdm = n_sdm << 1; 678 } 679 680 rc = r820t_write_reg_mask(priv, 0x16, sdm >> 8, 0x08); 681 if (rc < 0) 682 return rc; 683 rc = r820t_write_reg_mask(priv, 0x15, sdm & 0xff, 0x08); 684 if (rc < 0) 685 return rc; 686 687 for (i = 0; i < 2; i++) { 688 usleep_range(sleep_time, sleep_time + 1000); 689 690 /* Check if PLL has locked */ 691 rc = r820t_read(priv, 0x00, data, 3); 692 if (rc < 0) 693 return rc; 694 if (data[2] & 0x40) 695 break; 696 697 if (!i) { 698 /* Didn't lock. Increase VCO current */ 699 rc = r820t_write_reg_mask(priv, 0x12, 0x60, 0xe0); 700 if (rc < 0) 701 return rc; 702 } 703 } 704 705 if (!(data[2] & 0x40)) { 706 priv->has_lock = false; 707 return 0; 708 } 709 710 priv->has_lock = true; 711 tuner_dbg("tuner has lock at frequency %d kHz\n", freq); 712 713 /* set pll autotune = 8kHz */ 714 rc = r820t_write_reg_mask(priv, 0x1a, 0x08, 0x08); 715 716 return rc; 717} 718 719static int r820t_sysfreq_sel(struct r820t_priv *priv, u32 freq, 720 enum v4l2_tuner_type type, 721 v4l2_std_id std, 722 u32 delsys) 723{ 724 int rc; 725 u8 mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l; 726 u8 air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur; 727 728 tuner_dbg("adjusting tuner parameters for the standard\n"); 729 730 switch (delsys) { 731 case SYS_DVBT: 732 if ((freq == 506000000) || (freq == 666000000) || 733 (freq == 818000000)) { 734 mixer_top = 0x14; /* mixer top:14 , top-1, low-discharge */ 735 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 736 cp_cur = 0x28; /* 101, 0.2 */ 737 div_buf_cur = 0x20; /* 10, 200u */ 738 } else { 739 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 740 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 741 cp_cur = 0x38; /* 111, auto */ 742 div_buf_cur = 0x30; /* 11, 150u */ 743 } 744 lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ 745 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 746 air_cable1_in = 0x00; 747 cable2_in = 0x00; 748 pre_dect = 0x40; 749 lna_discharge = 14; 750 filter_cur = 0x40; /* 10, low */ 751 break; 752 case SYS_DVBT2: 753 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 754 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 755 lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ 756 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 757 air_cable1_in = 0x00; 758 cable2_in = 0x00; 759 pre_dect = 0x40; 760 lna_discharge = 14; 761 cp_cur = 0x38; /* 111, auto */ 762 div_buf_cur = 0x30; /* 11, 150u */ 763 filter_cur = 0x40; /* 10, low */ 764 break; 765 case SYS_ISDBT: 766 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 767 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 768 lna_vth_l = 0x75; /* lna vth 1.04 , vtl 0.84 */ 769 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 770 air_cable1_in = 0x00; 771 cable2_in = 0x00; 772 pre_dect = 0x40; 773 lna_discharge = 14; 774 cp_cur = 0x38; /* 111, auto */ 775 div_buf_cur = 0x30; /* 11, 150u */ 776 filter_cur = 0x40; /* 10, low */ 777 break; 778 default: /* DVB-T 8M */ 779 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 780 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 781 lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ 782 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 783 air_cable1_in = 0x00; 784 cable2_in = 0x00; 785 pre_dect = 0x40; 786 lna_discharge = 14; 787 cp_cur = 0x38; /* 111, auto */ 788 div_buf_cur = 0x30; /* 11, 150u */ 789 filter_cur = 0x40; /* 10, low */ 790 break; 791 } 792 793 if (priv->cfg->use_diplexer && 794 ((priv->cfg->rafael_chip == CHIP_R820T) || 795 (priv->cfg->rafael_chip == CHIP_R828S) || 796 (priv->cfg->rafael_chip == CHIP_R820C))) { 797 if (freq > DIP_FREQ) 798 air_cable1_in = 0x00; 799 else 800 air_cable1_in = 0x60; 801 cable2_in = 0x00; 802 } 803 804 rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0xc7); 805 if (rc < 0) 806 return rc; 807 rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0xf8); 808 if (rc < 0) 809 return rc; 810 rc = r820t_write_reg(priv, 0x0d, lna_vth_l); 811 if (rc < 0) 812 return rc; 813 rc = r820t_write_reg(priv, 0x0e, mixer_vth_l); 814 if (rc < 0) 815 return rc; 816 817 /* Air-IN only for Astrometa */ 818 rc = r820t_write_reg_mask(priv, 0x05, air_cable1_in, 0x60); 819 if (rc < 0) 820 return rc; 821 rc = r820t_write_reg_mask(priv, 0x06, cable2_in, 0x08); 822 if (rc < 0) 823 return rc; 824 825 rc = r820t_write_reg_mask(priv, 0x11, cp_cur, 0x38); 826 if (rc < 0) 827 return rc; 828 rc = r820t_write_reg_mask(priv, 0x17, div_buf_cur, 0x30); 829 if (rc < 0) 830 return rc; 831 rc = r820t_write_reg_mask(priv, 0x0a, filter_cur, 0x60); 832 if (rc < 0) 833 return rc; 834 /* 835 * Original driver initializes regs 0x05 and 0x06 with the 836 * same value again on this point. Probably, it is just an 837 * error there 838 */ 839 840 /* 841 * Set LNA 842 */ 843 844 tuner_dbg("adjusting LNA parameters\n"); 845 if (type != V4L2_TUNER_ANALOG_TV) { 846 /* LNA TOP: lowest */ 847 rc = r820t_write_reg_mask(priv, 0x1d, 0, 0x38); 848 if (rc < 0) 849 return rc; 850 851 /* 0: normal mode */ 852 rc = r820t_write_reg_mask(priv, 0x1c, 0, 0x04); 853 if (rc < 0) 854 return rc; 855 856 /* 0: PRE_DECT off */ 857 rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); 858 if (rc < 0) 859 return rc; 860 861 /* agc clk 250hz */ 862 rc = r820t_write_reg_mask(priv, 0x1a, 0x30, 0x30); 863 if (rc < 0) 864 return rc; 865 866 msleep(250); 867 868 /* write LNA TOP = 3 */ 869 rc = r820t_write_reg_mask(priv, 0x1d, 0x18, 0x38); 870 if (rc < 0) 871 return rc; 872 873 /* 874 * write discharge mode 875 * FIXME: IMHO, the mask here is wrong, but it matches 876 * what's there at the original driver 877 */ 878 rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); 879 if (rc < 0) 880 return rc; 881 882 /* LNA discharge current */ 883 rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); 884 if (rc < 0) 885 return rc; 886 887 /* agc clk 60hz */ 888 rc = r820t_write_reg_mask(priv, 0x1a, 0x20, 0x30); 889 if (rc < 0) 890 return rc; 891 } else { 892 /* PRE_DECT off */ 893 rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); 894 if (rc < 0) 895 return rc; 896 897 /* write LNA TOP */ 898 rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0x38); 899 if (rc < 0) 900 return rc; 901 902 /* 903 * write discharge mode 904 * FIXME: IMHO, the mask here is wrong, but it matches 905 * what's there at the original driver 906 */ 907 rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); 908 if (rc < 0) 909 return rc; 910 911 /* LNA discharge current */ 912 rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); 913 if (rc < 0) 914 return rc; 915 916 /* agc clk 1Khz, external det1 cap 1u */ 917 rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x30); 918 if (rc < 0) 919 return rc; 920 921 rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x04); 922 if (rc < 0) 923 return rc; 924 } 925 return 0; 926} 927 928static int r820t_set_tv_standard(struct r820t_priv *priv, 929 unsigned bw, 930 enum v4l2_tuner_type type, 931 v4l2_std_id std, u32 delsys) 932 933{ 934 int rc, i; 935 u32 if_khz, filt_cal_lo; 936 u8 data[5], val; 937 u8 filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through; 938 u8 lt_att, flt_ext_widest, polyfil_cur; 939 bool need_calibration; 940 941 tuner_dbg("selecting the delivery system\n"); 942 943 if (delsys == SYS_ISDBT) { 944 if_khz = 4063; 945 filt_cal_lo = 59000; 946 filt_gain = 0x10; /* +3db, 6mhz on */ 947 img_r = 0x00; /* image negative */ 948 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 949 hp_cor = 0x6a; /* 1.7m disable, +2cap, 1.25mhz */ 950 ext_enable = 0x40; /* r30[6], ext enable; r30[5]:0 ext at lna max */ 951 loop_through = 0x00; /* r5[7], lt on */ 952 lt_att = 0x00; /* r31[7], lt att enable */ 953 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 954 polyfil_cur = 0x60; /* r25[6:5]:min */ 955 } else { 956 if (bw <= 6) { 957 if_khz = 3570; 958 filt_cal_lo = 56000; /* 52000->56000 */ 959 filt_gain = 0x10; /* +3db, 6mhz on */ 960 img_r = 0x00; /* image negative */ 961 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 962 hp_cor = 0x6b; /* 1.7m disable, +2cap, 1.0mhz */ 963 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 964 loop_through = 0x00; /* r5[7], lt on */ 965 lt_att = 0x00; /* r31[7], lt att enable */ 966 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 967 polyfil_cur = 0x60; /* r25[6:5]:min */ 968 } else if (bw == 7) { 969#if 0 970 /* 971 * There are two 7 MHz tables defined on the original 972 * driver, but just the second one seems to be visible 973 * by rtl2832. Keep this one here commented, as it 974 * might be needed in the future 975 */ 976 977 if_khz = 4070; 978 filt_cal_lo = 60000; 979 filt_gain = 0x10; /* +3db, 6mhz on */ 980 img_r = 0x00; /* image negative */ 981 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 982 hp_cor = 0x2b; /* 1.7m disable, +1cap, 1.0mhz */ 983 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 984 loop_through = 0x00; /* r5[7], lt on */ 985 lt_att = 0x00; /* r31[7], lt att enable */ 986 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 987 polyfil_cur = 0x60; /* r25[6:5]:min */ 988#endif 989 /* 7 MHz, second table */ 990 if_khz = 4570; 991 filt_cal_lo = 63000; 992 filt_gain = 0x10; /* +3db, 6mhz on */ 993 img_r = 0x00; /* image negative */ 994 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 995 hp_cor = 0x2a; /* 1.7m disable, +1cap, 1.25mhz */ 996 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 997 loop_through = 0x00; /* r5[7], lt on */ 998 lt_att = 0x00; /* r31[7], lt att enable */ 999 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 1000 polyfil_cur = 0x60; /* r25[6:5]:min */ 1001 } else { 1002 if_khz = 4570; 1003 filt_cal_lo = 68500; 1004 filt_gain = 0x10; /* +3db, 6mhz on */ 1005 img_r = 0x00; /* image negative */ 1006 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 1007 hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */ 1008 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 1009 loop_through = 0x00; /* r5[7], lt on */ 1010 lt_att = 0x00; /* r31[7], lt att enable */ 1011 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 1012 polyfil_cur = 0x60; /* r25[6:5]:min */ 1013 } 1014 } 1015 1016 /* Initialize the shadow registers */ 1017 memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); 1018 1019 /* Init Flag & Xtal_check Result */ 1020 if (priv->imr_done) 1021 val = 1 | priv->xtal_cap_sel << 1; 1022 else 1023 val = 0; 1024 rc = r820t_write_reg_mask(priv, 0x0c, val, 0x0f); 1025 if (rc < 0) 1026 return rc; 1027 1028 /* version */ 1029 rc = r820t_write_reg_mask(priv, 0x13, VER_NUM, 0x3f); 1030 if (rc < 0) 1031 return rc; 1032 1033 /* for LT Gain test */ 1034 if (type != V4L2_TUNER_ANALOG_TV) { 1035 rc = r820t_write_reg_mask(priv, 0x1d, 0x00, 0x38); 1036 if (rc < 0) 1037 return rc; 1038 usleep_range(1000, 2000); 1039 } 1040 priv->int_freq = if_khz * 1000; 1041 1042 /* Check if standard changed. If so, filter calibration is needed */ 1043 if (type != priv->type) 1044 need_calibration = true; 1045 else if ((type == V4L2_TUNER_ANALOG_TV) && (std != priv->std)) 1046 need_calibration = true; 1047 else if ((type == V4L2_TUNER_DIGITAL_TV) && 1048 ((delsys != priv->delsys) || bw != priv->bw)) 1049 need_calibration = true; 1050 else 1051 need_calibration = false; 1052 1053 if (need_calibration) { 1054 tuner_dbg("calibrating the tuner\n"); 1055 for (i = 0; i < 2; i++) { 1056 /* Set filt_cap */ 1057 rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x60); 1058 if (rc < 0) 1059 return rc; 1060 1061 /* set cali clk =on */ 1062 rc = r820t_write_reg_mask(priv, 0x0f, 0x04, 0x04); 1063 if (rc < 0) 1064 return rc; 1065 1066 /* X'tal cap 0pF for PLL */ 1067 rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x03); 1068 if (rc < 0) 1069 return rc; 1070 1071 rc = r820t_set_pll(priv, type, filt_cal_lo); 1072 if (rc < 0 || !priv->has_lock) 1073 return rc; 1074 1075 /* Start Trigger */ 1076 rc = r820t_write_reg_mask(priv, 0x0b, 0x10, 0x10); 1077 if (rc < 0) 1078 return rc; 1079 1080 usleep_range(1000, 2000); 1081 1082 /* Stop Trigger */ 1083 rc = r820t_write_reg_mask(priv, 0x0b, 0x00, 0x10); 1084 if (rc < 0) 1085 return rc; 1086 1087 /* set cali clk =off */ 1088 rc = r820t_write_reg_mask(priv, 0x0f, 0x00, 0x04); 1089 if (rc < 0) 1090 return rc; 1091 1092 /* Check if calibration worked */ 1093 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1094 if (rc < 0) 1095 return rc; 1096 1097 priv->fil_cal_code = data[4] & 0x0f; 1098 if (priv->fil_cal_code && priv->fil_cal_code != 0x0f) 1099 break; 1100 } 1101 /* narrowest */ 1102 if (priv->fil_cal_code == 0x0f) 1103 priv->fil_cal_code = 0; 1104 } 1105 1106 rc = r820t_write_reg_mask(priv, 0x0a, 1107 filt_q | priv->fil_cal_code, 0x1f); 1108 if (rc < 0) 1109 return rc; 1110 1111 /* Set BW, Filter_gain, & HP corner */ 1112 rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x10); 1113 if (rc < 0) 1114 return rc; 1115 1116 1117 /* Set Img_R */ 1118 rc = r820t_write_reg_mask(priv, 0x07, img_r, 0x80); 1119 if (rc < 0) 1120 return rc; 1121 1122 /* Set filt_3dB, V6MHz */ 1123 rc = r820t_write_reg_mask(priv, 0x06, filt_gain, 0x30); 1124 if (rc < 0) 1125 return rc; 1126 1127 /* channel filter extension */ 1128 rc = r820t_write_reg_mask(priv, 0x1e, ext_enable, 0x60); 1129 if (rc < 0) 1130 return rc; 1131 1132 /* Loop through */ 1133 rc = r820t_write_reg_mask(priv, 0x05, loop_through, 0x80); 1134 if (rc < 0) 1135 return rc; 1136 1137 /* Loop through attenuation */ 1138 rc = r820t_write_reg_mask(priv, 0x1f, lt_att, 0x80); 1139 if (rc < 0) 1140 return rc; 1141 1142 /* filter extension widest */ 1143 rc = r820t_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80); 1144 if (rc < 0) 1145 return rc; 1146 1147 /* RF poly filter current */ 1148 rc = r820t_write_reg_mask(priv, 0x19, polyfil_cur, 0x60); 1149 if (rc < 0) 1150 return rc; 1151 1152 /* Store current standard. If it changes, re-calibrate the tuner */ 1153 priv->delsys = delsys; 1154 priv->type = type; 1155 priv->std = std; 1156 priv->bw = bw; 1157 1158 return 0; 1159} 1160 1161static int r820t_read_gain(struct r820t_priv *priv) 1162{ 1163 u8 data[4]; 1164 int rc; 1165 1166 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1167 if (rc < 0) 1168 return rc; 1169 1170 return ((data[3] & 0x0f) << 1) + ((data[3] & 0xf0) >> 4); 1171} 1172 1173static int r820t_set_gain_mode(struct r820t_priv *priv, 1174 bool set_manual_gain, 1175 int gain) 1176{ 1177 int rc; 1178 1179 if (set_manual_gain) { 1180 int i, total_gain = 0; 1181 uint8_t mix_index = 0, lna_index = 0; 1182 u8 data[4]; 1183 1184 /* LNA auto off */ 1185 rc = r820t_write_reg_mask(priv, 0x05, 0x10, 0x10); 1186 if (rc < 0) 1187 return rc; 1188 1189 /* Mixer auto off */ 1190 rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10); 1191 if (rc < 0) 1192 return rc; 1193 1194 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1195 if (rc < 0) 1196 return rc; 1197 1198 /* set fixed VGA gain for now (16.3 dB) */ 1199 rc = r820t_write_reg_mask(priv, 0x0c, 0x08, 0x9f); 1200 if (rc < 0) 1201 return rc; 1202 1203 for (i = 0; i < 15; i++) { 1204 if (total_gain >= gain) 1205 break; 1206 1207 total_gain += r820t_lna_gain_steps[++lna_index]; 1208 1209 if (total_gain >= gain) 1210 break; 1211 1212 total_gain += r820t_mixer_gain_steps[++mix_index]; 1213 } 1214 1215 /* set LNA gain */ 1216 rc = r820t_write_reg_mask(priv, 0x05, lna_index, 0x0f); 1217 if (rc < 0) 1218 return rc; 1219 1220 /* set Mixer gain */ 1221 rc = r820t_write_reg_mask(priv, 0x07, mix_index, 0x0f); 1222 if (rc < 0) 1223 return rc; 1224 } else { 1225 /* LNA */ 1226 rc = r820t_write_reg_mask(priv, 0x05, 0, 0xef); 1227 if (rc < 0) 1228 return rc; 1229 1230 /* Mixer */ 1231 rc = r820t_write_reg_mask(priv, 0x07, 0x10, 0xef); 1232 if (rc < 0) 1233 return rc; 1234 1235 /* set fixed VGA gain for now (26.5 dB) */ 1236 rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f); 1237 if (rc < 0) 1238 return rc; 1239 } 1240 1241 return 0; 1242} 1243 1244 1245static int generic_set_freq(struct dvb_frontend *fe, 1246 u32 freq /* in HZ */, 1247 unsigned bw, 1248 enum v4l2_tuner_type type, 1249 v4l2_std_id std, u32 delsys) 1250{ 1251 struct r820t_priv *priv = fe->tuner_priv; 1252 int rc = -EINVAL; 1253 u32 lo_freq; 1254 1255 tuner_dbg("should set frequency to %d kHz, bw %d MHz\n", 1256 freq / 1000, bw); 1257 1258 rc = r820t_set_tv_standard(priv, bw, type, std, delsys); 1259 if (rc < 0) 1260 goto err; 1261 1262 if ((type == V4L2_TUNER_ANALOG_TV) && (std == V4L2_STD_SECAM_LC)) 1263 lo_freq = freq - priv->int_freq; 1264 else 1265 lo_freq = freq + priv->int_freq; 1266 1267 rc = r820t_set_mux(priv, lo_freq); 1268 if (rc < 0) 1269 goto err; 1270 1271 rc = r820t_set_gain_mode(priv, true, 0); 1272 if (rc < 0) 1273 goto err; 1274 1275 rc = r820t_set_pll(priv, type, lo_freq); 1276 if (rc < 0 || !priv->has_lock) 1277 goto err; 1278 1279 rc = r820t_sysfreq_sel(priv, freq, type, std, delsys); 1280 if (rc < 0) 1281 goto err; 1282 1283 tuner_dbg("%s: PLL locked on frequency %d Hz, gain=%d\n", 1284 __func__, freq, r820t_read_gain(priv)); 1285 1286err: 1287 1288 if (rc < 0) 1289 tuner_dbg("%s: failed=%d\n", __func__, rc); 1290 return rc; 1291} 1292 1293/* 1294 * r820t standby logic 1295 */ 1296 1297static int r820t_standby(struct r820t_priv *priv) 1298{ 1299 int rc; 1300 1301 /* If device was not initialized yet, don't need to standby */ 1302 if (!priv->init_done) 1303 return 0; 1304 1305 rc = r820t_write_reg(priv, 0x06, 0xb1); 1306 if (rc < 0) 1307 return rc; 1308 rc = r820t_write_reg(priv, 0x05, 0x03); 1309 if (rc < 0) 1310 return rc; 1311 rc = r820t_write_reg(priv, 0x07, 0x3a); 1312 if (rc < 0) 1313 return rc; 1314 rc = r820t_write_reg(priv, 0x08, 0x40); 1315 if (rc < 0) 1316 return rc; 1317 rc = r820t_write_reg(priv, 0x09, 0xc0); 1318 if (rc < 0) 1319 return rc; 1320 rc = r820t_write_reg(priv, 0x0a, 0x36); 1321 if (rc < 0) 1322 return rc; 1323 rc = r820t_write_reg(priv, 0x0c, 0x35); 1324 if (rc < 0) 1325 return rc; 1326 rc = r820t_write_reg(priv, 0x0f, 0x68); 1327 if (rc < 0) 1328 return rc; 1329 rc = r820t_write_reg(priv, 0x11, 0x03); 1330 if (rc < 0) 1331 return rc; 1332 rc = r820t_write_reg(priv, 0x17, 0xf4); 1333 if (rc < 0) 1334 return rc; 1335 rc = r820t_write_reg(priv, 0x19, 0x0c); 1336 1337 /* Force initial calibration */ 1338 priv->type = -1; 1339 1340 return rc; 1341} 1342 1343/* 1344 * r820t device init logic 1345 */ 1346 1347static int r820t_xtal_check(struct r820t_priv *priv) 1348{ 1349 int rc, i; 1350 u8 data[3], val; 1351 1352 /* Initialize the shadow registers */ 1353 memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); 1354 1355 /* cap 30pF & Drive Low */ 1356 rc = r820t_write_reg_mask(priv, 0x10, 0x0b, 0x0b); 1357 if (rc < 0) 1358 return rc; 1359 1360 /* set pll autotune = 128kHz */ 1361 rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); 1362 if (rc < 0) 1363 return rc; 1364 1365 /* set manual initial reg = 111111; */ 1366 rc = r820t_write_reg_mask(priv, 0x13, 0x7f, 0x7f); 1367 if (rc < 0) 1368 return rc; 1369 1370 /* set auto */ 1371 rc = r820t_write_reg_mask(priv, 0x13, 0x00, 0x40); 1372 if (rc < 0) 1373 return rc; 1374 1375 /* Try several xtal capacitor alternatives */ 1376 for (i = 0; i < ARRAY_SIZE(r820t_xtal_capacitor); i++) { 1377 rc = r820t_write_reg_mask(priv, 0x10, 1378 r820t_xtal_capacitor[i][0], 0x1b); 1379 if (rc < 0) 1380 return rc; 1381 1382 usleep_range(5000, 6000); 1383 1384 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1385 if (rc < 0) 1386 return rc; 1387 if ((!data[2]) & 0x40) 1388 continue; 1389 1390 val = data[2] & 0x3f; 1391 1392 if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23)) 1393 break; 1394 1395 if (val != 0x3f) 1396 break; 1397 } 1398 1399 if (i == ARRAY_SIZE(r820t_xtal_capacitor)) 1400 return -EINVAL; 1401 1402 return r820t_xtal_capacitor[i][1]; 1403} 1404 1405static int r820t_imr_prepare(struct r820t_priv *priv) 1406{ 1407 int rc; 1408 1409 /* Initialize the shadow registers */ 1410 memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); 1411 1412 /* lna off (air-in off) */ 1413 rc = r820t_write_reg_mask(priv, 0x05, 0x20, 0x20); 1414 if (rc < 0) 1415 return rc; 1416 1417 /* mixer gain mode = manual */ 1418 rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10); 1419 if (rc < 0) 1420 return rc; 1421 1422 /* filter corner = lowest */ 1423 rc = r820t_write_reg_mask(priv, 0x0a, 0x0f, 0x0f); 1424 if (rc < 0) 1425 return rc; 1426 1427 /* filter bw=+2cap, hp=5M */ 1428 rc = r820t_write_reg_mask(priv, 0x0b, 0x60, 0x6f); 1429 if (rc < 0) 1430 return rc; 1431 1432 /* adc=on, vga code mode, gain = 26.5dB */ 1433 rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f); 1434 if (rc < 0) 1435 return rc; 1436 1437 /* ring clk = on */ 1438 rc = r820t_write_reg_mask(priv, 0x0f, 0, 0x08); 1439 if (rc < 0) 1440 return rc; 1441 1442 /* ring power = on */ 1443 rc = r820t_write_reg_mask(priv, 0x18, 0x10, 0x10); 1444 if (rc < 0) 1445 return rc; 1446 1447 /* from ring = ring pll in */ 1448 rc = r820t_write_reg_mask(priv, 0x1c, 0x02, 0x02); 1449 if (rc < 0) 1450 return rc; 1451 1452 /* sw_pdect = det3 */ 1453 rc = r820t_write_reg_mask(priv, 0x1e, 0x80, 0x80); 1454 if (rc < 0) 1455 return rc; 1456 1457 /* Set filt_3dB */ 1458 rc = r820t_write_reg_mask(priv, 0x06, 0x20, 0x20); 1459 1460 return rc; 1461} 1462 1463static int r820t_multi_read(struct r820t_priv *priv) 1464{ 1465 int rc, i; 1466 u8 data[2], min = 0, max = 255, sum = 0; 1467 1468 usleep_range(5000, 6000); 1469 1470 for (i = 0; i < 6; i++) { 1471 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1472 if (rc < 0) 1473 return rc; 1474 1475 sum += data[1]; 1476 1477 if (data[1] < min) 1478 min = data[1]; 1479 1480 if (data[1] > max) 1481 max = data[1]; 1482 } 1483 rc = sum - max - min; 1484 1485 return rc; 1486} 1487 1488static int r820t_imr_cross(struct r820t_priv *priv, 1489 struct r820t_sect_type iq_point[3], 1490 u8 *x_direct) 1491{ 1492 struct r820t_sect_type cross[5]; /* (0,0)(0,Q-1)(0,I-1)(Q-1,0)(I-1,0) */ 1493 struct r820t_sect_type tmp; 1494 int i, rc; 1495 u8 reg08, reg09; 1496 1497 reg08 = r820t_read_cache_reg(priv, 8) & 0xc0; 1498 reg09 = r820t_read_cache_reg(priv, 9) & 0xc0; 1499 1500 tmp.gain_x = 0; 1501 tmp.phase_y = 0; 1502 tmp.value = 255; 1503 1504 for (i = 0; i < 5; i++) { 1505 switch (i) { 1506 case 0: 1507 cross[i].gain_x = reg08; 1508 cross[i].phase_y = reg09; 1509 break; 1510 case 1: 1511 cross[i].gain_x = reg08; /* 0 */ 1512 cross[i].phase_y = reg09 + 1; /* Q-1 */ 1513 break; 1514 case 2: 1515 cross[i].gain_x = reg08; /* 0 */ 1516 cross[i].phase_y = (reg09 | 0x20) + 1; /* I-1 */ 1517 break; 1518 case 3: 1519 cross[i].gain_x = reg08 + 1; /* Q-1 */ 1520 cross[i].phase_y = reg09; 1521 break; 1522 default: 1523 cross[i].gain_x = (reg08 | 0x20) + 1; /* I-1 */ 1524 cross[i].phase_y = reg09; 1525 } 1526 1527 rc = r820t_write_reg(priv, 0x08, cross[i].gain_x); 1528 if (rc < 0) 1529 return rc; 1530 1531 rc = r820t_write_reg(priv, 0x09, cross[i].phase_y); 1532 if (rc < 0) 1533 return rc; 1534 1535 rc = r820t_multi_read(priv); 1536 if (rc < 0) 1537 return rc; 1538 1539 cross[i].value = rc; 1540 1541 if (cross[i].value < tmp.value) 1542 memcpy(&tmp, &cross[i], sizeof(tmp)); 1543 } 1544 1545 if ((tmp.phase_y & 0x1f) == 1) { /* y-direction */ 1546 *x_direct = 0; 1547 1548 iq_point[0] = cross[0]; 1549 iq_point[1] = cross[1]; 1550 iq_point[2] = cross[2]; 1551 } else { /* (0,0) or x-direction */ 1552 *x_direct = 1; 1553 1554 iq_point[0] = cross[0]; 1555 iq_point[1] = cross[3]; 1556 iq_point[2] = cross[4]; 1557 } 1558 return 0; 1559} 1560 1561static void r820t_compre_cor(struct r820t_sect_type iq[3]) 1562{ 1563 int i; 1564 1565 for (i = 3; i > 0; i--) { 1566 if (iq[0].value > iq[i - 1].value) 1567 swap(iq[0], iq[i - 1]); 1568 } 1569} 1570 1571static int r820t_compre_step(struct r820t_priv *priv, 1572 struct r820t_sect_type iq[3], u8 reg) 1573{ 1574 int rc; 1575 struct r820t_sect_type tmp; 1576 1577 /* 1578 * Purpose: if (Gain<9 or Phase<9), Gain+1 or Phase+1 and compare 1579 * with min value: 1580 * new < min => update to min and continue 1581 * new > min => Exit 1582 */ 1583 1584 /* min value already saved in iq[0] */ 1585 tmp.phase_y = iq[0].phase_y; 1586 tmp.gain_x = iq[0].gain_x; 1587 1588 while (((tmp.gain_x & 0x1f) < IMR_TRIAL) && 1589 ((tmp.phase_y & 0x1f) < IMR_TRIAL)) { 1590 if (reg == 0x08) 1591 tmp.gain_x++; 1592 else 1593 tmp.phase_y++; 1594 1595 rc = r820t_write_reg(priv, 0x08, tmp.gain_x); 1596 if (rc < 0) 1597 return rc; 1598 1599 rc = r820t_write_reg(priv, 0x09, tmp.phase_y); 1600 if (rc < 0) 1601 return rc; 1602 1603 rc = r820t_multi_read(priv); 1604 if (rc < 0) 1605 return rc; 1606 tmp.value = rc; 1607 1608 if (tmp.value <= iq[0].value) { 1609 iq[0].gain_x = tmp.gain_x; 1610 iq[0].phase_y = tmp.phase_y; 1611 iq[0].value = tmp.value; 1612 } else { 1613 return 0; 1614 } 1615 1616 } 1617 1618 return 0; 1619} 1620 1621static int r820t_iq_tree(struct r820t_priv *priv, 1622 struct r820t_sect_type iq[3], 1623 u8 fix_val, u8 var_val, u8 fix_reg) 1624{ 1625 int rc, i; 1626 u8 tmp, var_reg; 1627 1628 /* 1629 * record IMC results by input gain/phase location then adjust 1630 * gain or phase positive 1 step and negtive 1 step, 1631 * both record results 1632 */ 1633 1634 if (fix_reg == 0x08) 1635 var_reg = 0x09; 1636 else 1637 var_reg = 0x08; 1638 1639 for (i = 0; i < 3; i++) { 1640 rc = r820t_write_reg(priv, fix_reg, fix_val); 1641 if (rc < 0) 1642 return rc; 1643 1644 rc = r820t_write_reg(priv, var_reg, var_val); 1645 if (rc < 0) 1646 return rc; 1647 1648 rc = r820t_multi_read(priv); 1649 if (rc < 0) 1650 return rc; 1651 iq[i].value = rc; 1652 1653 if (fix_reg == 0x08) { 1654 iq[i].gain_x = fix_val; 1655 iq[i].phase_y = var_val; 1656 } else { 1657 iq[i].phase_y = fix_val; 1658 iq[i].gain_x = var_val; 1659 } 1660 1661 if (i == 0) { /* try right-side point */ 1662 var_val++; 1663 } else if (i == 1) { /* try left-side point */ 1664 /* if absolute location is 1, change I/Q direction */ 1665 if ((var_val & 0x1f) < 0x02) { 1666 tmp = 2 - (var_val & 0x1f); 1667 1668 /* b[5]:I/Q selection. 0:Q-path, 1:I-path */ 1669 if (var_val & 0x20) { 1670 var_val &= 0xc0; 1671 var_val |= tmp; 1672 } else { 1673 var_val |= 0x20 | tmp; 1674 } 1675 } else { 1676 var_val -= 2; 1677 } 1678 } 1679 } 1680 1681 return 0; 1682} 1683 1684static int r820t_section(struct r820t_priv *priv, 1685 struct r820t_sect_type *iq_point) 1686{ 1687 int rc; 1688 struct r820t_sect_type compare_iq[3], compare_bet[3]; 1689 1690 /* Try X-1 column and save min result to compare_bet[0] */ 1691 if (!(iq_point->gain_x & 0x1f)) 1692 compare_iq[0].gain_x = ((iq_point->gain_x) & 0xdf) + 1; /* Q-path, Gain=1 */ 1693 else 1694 compare_iq[0].gain_x = iq_point->gain_x - 1; /* left point */ 1695 compare_iq[0].phase_y = iq_point->phase_y; 1696 1697 /* y-direction */ 1698 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1699 compare_iq[0].phase_y, 0x08); 1700 if (rc < 0) 1701 return rc; 1702 1703 r820t_compre_cor(compare_iq); 1704 1705 compare_bet[0] = compare_iq[0]; 1706 1707 /* Try X column and save min result to compare_bet[1] */ 1708 compare_iq[0].gain_x = iq_point->gain_x; 1709 compare_iq[0].phase_y = iq_point->phase_y; 1710 1711 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1712 compare_iq[0].phase_y, 0x08); 1713 if (rc < 0) 1714 return rc; 1715 1716 r820t_compre_cor(compare_iq); 1717 1718 compare_bet[1] = compare_iq[0]; 1719 1720 /* Try X+1 column and save min result to compare_bet[2] */ 1721 if ((iq_point->gain_x & 0x1f) == 0x00) 1722 compare_iq[0].gain_x = ((iq_point->gain_x) | 0x20) + 1; /* I-path, Gain=1 */ 1723 else 1724 compare_iq[0].gain_x = iq_point->gain_x + 1; 1725 compare_iq[0].phase_y = iq_point->phase_y; 1726 1727 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1728 compare_iq[0].phase_y, 0x08); 1729 if (rc < 0) 1730 return rc; 1731 1732 r820t_compre_cor(compare_iq); 1733 1734 compare_bet[2] = compare_iq[0]; 1735 1736 r820t_compre_cor(compare_bet); 1737 1738 *iq_point = compare_bet[0]; 1739 1740 return 0; 1741} 1742 1743static int r820t_vga_adjust(struct r820t_priv *priv) 1744{ 1745 int rc; 1746 u8 vga_count; 1747 1748 /* increase vga power to let image significant */ 1749 for (vga_count = 12; vga_count < 16; vga_count++) { 1750 rc = r820t_write_reg_mask(priv, 0x0c, vga_count, 0x0f); 1751 if (rc < 0) 1752 return rc; 1753 1754 usleep_range(10000, 11000); 1755 1756 rc = r820t_multi_read(priv); 1757 if (rc < 0) 1758 return rc; 1759 1760 if (rc > 40 * 4) 1761 break; 1762 } 1763 1764 return 0; 1765} 1766 1767static int r820t_iq(struct r820t_priv *priv, struct r820t_sect_type *iq_pont) 1768{ 1769 struct r820t_sect_type compare_iq[3]; 1770 int rc; 1771 u8 x_direction = 0; /* 1:x, 0:y */ 1772 u8 dir_reg, other_reg; 1773 1774 r820t_vga_adjust(priv); 1775 1776 rc = r820t_imr_cross(priv, compare_iq, &x_direction); 1777 if (rc < 0) 1778 return rc; 1779 1780 if (x_direction == 1) { 1781 dir_reg = 0x08; 1782 other_reg = 0x09; 1783 } else { 1784 dir_reg = 0x09; 1785 other_reg = 0x08; 1786 } 1787 1788 /* compare and find min of 3 points. determine i/q direction */ 1789 r820t_compre_cor(compare_iq); 1790 1791 /* increase step to find min value of this direction */ 1792 rc = r820t_compre_step(priv, compare_iq, dir_reg); 1793 if (rc < 0) 1794 return rc; 1795 1796 /* the other direction */ 1797 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1798 compare_iq[0].phase_y, dir_reg); 1799 if (rc < 0) 1800 return rc; 1801 1802 /* compare and find min of 3 points. determine i/q direction */ 1803 r820t_compre_cor(compare_iq); 1804 1805 /* increase step to find min value on this direction */ 1806 rc = r820t_compre_step(priv, compare_iq, other_reg); 1807 if (rc < 0) 1808 return rc; 1809 1810 /* check 3 points again */ 1811 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1812 compare_iq[0].phase_y, other_reg); 1813 if (rc < 0) 1814 return rc; 1815 1816 r820t_compre_cor(compare_iq); 1817 1818 /* section-9 check */ 1819 rc = r820t_section(priv, compare_iq); 1820 1821 *iq_pont = compare_iq[0]; 1822 1823 /* reset gain/phase control setting */ 1824 rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f); 1825 if (rc < 0) 1826 return rc; 1827 1828 rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f); 1829 1830 return rc; 1831} 1832 1833static int r820t_f_imr(struct r820t_priv *priv, struct r820t_sect_type *iq_pont) 1834{ 1835 int rc; 1836 1837 r820t_vga_adjust(priv); 1838 1839 /* 1840 * search surrounding points from previous point 1841 * try (x-1), (x), (x+1) columns, and find min IMR result point 1842 */ 1843 rc = r820t_section(priv, iq_pont); 1844 if (rc < 0) 1845 return rc; 1846 1847 return 0; 1848} 1849 1850static int r820t_imr(struct r820t_priv *priv, unsigned imr_mem, bool im_flag) 1851{ 1852 struct r820t_sect_type imr_point; 1853 int rc; 1854 u32 ring_vco, ring_freq, ring_ref; 1855 u8 n_ring, n; 1856 int reg18, reg19, reg1f; 1857 1858 if (priv->cfg->xtal > 24000000) 1859 ring_ref = priv->cfg->xtal / 2; 1860 else 1861 ring_ref = priv->cfg->xtal; 1862 1863 for (n = 0; n < 16; n++) { 1864 if ((16 + n) * 8 * ring_ref >= 3100000) { 1865 n_ring = n; 1866 break; 1867 } 1868 1869 /* n_ring not found */ 1870 if (n == 15) 1871 n_ring = n; 1872 } 1873 1874 reg18 = r820t_read_cache_reg(priv, 0x18); 1875 reg19 = r820t_read_cache_reg(priv, 0x19); 1876 reg1f = r820t_read_cache_reg(priv, 0x1f); 1877 1878 reg18 &= 0xf0; /* set ring[3:0] */ 1879 reg18 |= n_ring; 1880 1881 ring_vco = (16 + n_ring) * 8 * ring_ref; 1882 1883 reg18 &= 0xdf; /* clear ring_se23 */ 1884 reg19 &= 0xfc; /* clear ring_seldiv */ 1885 reg1f &= 0xfc; /* clear ring_att */ 1886 1887 switch (imr_mem) { 1888 case 0: 1889 ring_freq = ring_vco / 48; 1890 reg18 |= 0x20; /* ring_se23 = 1 */ 1891 reg19 |= 0x03; /* ring_seldiv = 3 */ 1892 reg1f |= 0x02; /* ring_att 10 */ 1893 break; 1894 case 1: 1895 ring_freq = ring_vco / 16; 1896 reg18 |= 0x00; /* ring_se23 = 0 */ 1897 reg19 |= 0x02; /* ring_seldiv = 2 */ 1898 reg1f |= 0x00; /* pw_ring 00 */ 1899 break; 1900 case 2: 1901 ring_freq = ring_vco / 8; 1902 reg18 |= 0x00; /* ring_se23 = 0 */ 1903 reg19 |= 0x01; /* ring_seldiv = 1 */ 1904 reg1f |= 0x03; /* pw_ring 11 */ 1905 break; 1906 case 3: 1907 ring_freq = ring_vco / 6; 1908 reg18 |= 0x20; /* ring_se23 = 1 */ 1909 reg19 |= 0x00; /* ring_seldiv = 0 */ 1910 reg1f |= 0x03; /* pw_ring 11 */ 1911 break; 1912 case 4: 1913 ring_freq = ring_vco / 4; 1914 reg18 |= 0x00; /* ring_se23 = 0 */ 1915 reg19 |= 0x00; /* ring_seldiv = 0 */ 1916 reg1f |= 0x01; /* pw_ring 01 */ 1917 break; 1918 default: 1919 ring_freq = ring_vco / 4; 1920 reg18 |= 0x00; /* ring_se23 = 0 */ 1921 reg19 |= 0x00; /* ring_seldiv = 0 */ 1922 reg1f |= 0x01; /* pw_ring 01 */ 1923 break; 1924 } 1925 1926 1927 /* write pw_ring, n_ring, ringdiv2 registers */ 1928 1929 /* n_ring, ring_se23 */ 1930 rc = r820t_write_reg(priv, 0x18, reg18); 1931 if (rc < 0) 1932 return rc; 1933 1934 /* ring_sediv */ 1935 rc = r820t_write_reg(priv, 0x19, reg19); 1936 if (rc < 0) 1937 return rc; 1938 1939 /* pw_ring */ 1940 rc = r820t_write_reg(priv, 0x1f, reg1f); 1941 if (rc < 0) 1942 return rc; 1943 1944 /* mux input freq ~ rf_in freq */ 1945 rc = r820t_set_mux(priv, (ring_freq - 5300) * 1000); 1946 if (rc < 0) 1947 return rc; 1948 1949 rc = r820t_set_pll(priv, V4L2_TUNER_DIGITAL_TV, 1950 (ring_freq - 5300) * 1000); 1951 if (!priv->has_lock) 1952 rc = -EINVAL; 1953 if (rc < 0) 1954 return rc; 1955 1956 if (im_flag) { 1957 rc = r820t_iq(priv, &imr_point); 1958 } else { 1959 imr_point.gain_x = priv->imr_data[3].gain_x; 1960 imr_point.phase_y = priv->imr_data[3].phase_y; 1961 imr_point.value = priv->imr_data[3].value; 1962 1963 rc = r820t_f_imr(priv, &imr_point); 1964 } 1965 if (rc < 0) 1966 return rc; 1967 1968 /* save IMR value */ 1969 switch (imr_mem) { 1970 case 0: 1971 priv->imr_data[0].gain_x = imr_point.gain_x; 1972 priv->imr_data[0].phase_y = imr_point.phase_y; 1973 priv->imr_data[0].value = imr_point.value; 1974 break; 1975 case 1: 1976 priv->imr_data[1].gain_x = imr_point.gain_x; 1977 priv->imr_data[1].phase_y = imr_point.phase_y; 1978 priv->imr_data[1].value = imr_point.value; 1979 break; 1980 case 2: 1981 priv->imr_data[2].gain_x = imr_point.gain_x; 1982 priv->imr_data[2].phase_y = imr_point.phase_y; 1983 priv->imr_data[2].value = imr_point.value; 1984 break; 1985 case 3: 1986 priv->imr_data[3].gain_x = imr_point.gain_x; 1987 priv->imr_data[3].phase_y = imr_point.phase_y; 1988 priv->imr_data[3].value = imr_point.value; 1989 break; 1990 case 4: 1991 priv->imr_data[4].gain_x = imr_point.gain_x; 1992 priv->imr_data[4].phase_y = imr_point.phase_y; 1993 priv->imr_data[4].value = imr_point.value; 1994 break; 1995 default: 1996 priv->imr_data[4].gain_x = imr_point.gain_x; 1997 priv->imr_data[4].phase_y = imr_point.phase_y; 1998 priv->imr_data[4].value = imr_point.value; 1999 break; 2000 } 2001 2002 return 0; 2003} 2004 2005static int r820t_imr_callibrate(struct r820t_priv *priv) 2006{ 2007 int rc, i; 2008 int xtal_cap = 0; 2009 2010 if (priv->init_done) 2011 return 0; 2012 2013 /* Detect Xtal capacitance */ 2014 if ((priv->cfg->rafael_chip == CHIP_R820T) || 2015 (priv->cfg->rafael_chip == CHIP_R828S) || 2016 (priv->cfg->rafael_chip == CHIP_R820C)) { 2017 priv->xtal_cap_sel = XTAL_HIGH_CAP_0P; 2018 } else { 2019 /* Initialize registers */ 2020 rc = r820t_write(priv, 0x05, 2021 r820t_init_array, sizeof(r820t_init_array)); 2022 if (rc < 0) 2023 return rc; 2024 for (i = 0; i < 3; i++) { 2025 rc = r820t_xtal_check(priv); 2026 if (rc < 0) 2027 return rc; 2028 if (!i || rc > xtal_cap) 2029 xtal_cap = rc; 2030 } 2031 priv->xtal_cap_sel = xtal_cap; 2032 } 2033 2034 /* 2035 * Disables IMR callibration. That emulates the same behaviour 2036 * as what is done by rtl-sdr userspace library. Useful for testing 2037 */ 2038 if (no_imr_cal) { 2039 priv->init_done = true; 2040 2041 return 0; 2042 } 2043 2044 /* Initialize registers */ 2045 rc = r820t_write(priv, 0x05, 2046 r820t_init_array, sizeof(r820t_init_array)); 2047 if (rc < 0) 2048 return rc; 2049 2050 rc = r820t_imr_prepare(priv); 2051 if (rc < 0) 2052 return rc; 2053 2054 rc = r820t_imr(priv, 3, true); 2055 if (rc < 0) 2056 return rc; 2057 rc = r820t_imr(priv, 1, false); 2058 if (rc < 0) 2059 return rc; 2060 rc = r820t_imr(priv, 0, false); 2061 if (rc < 0) 2062 return rc; 2063 rc = r820t_imr(priv, 2, false); 2064 if (rc < 0) 2065 return rc; 2066 rc = r820t_imr(priv, 4, false); 2067 if (rc < 0) 2068 return rc; 2069 2070 priv->init_done = true; 2071 priv->imr_done = true; 2072 2073 return 0; 2074} 2075 2076#if 0 2077/* Not used, for now */ 2078static int r820t_gpio(struct r820t_priv *priv, bool enable) 2079{ 2080 return r820t_write_reg_mask(priv, 0x0f, enable ? 1 : 0, 0x01); 2081} 2082#endif 2083 2084/* 2085 * r820t frontend operations and tuner attach code 2086 * 2087 * All driver locks and i2c control are only in this part of the code 2088 */ 2089 2090static int r820t_init(struct dvb_frontend *fe) 2091{ 2092 struct r820t_priv *priv = fe->tuner_priv; 2093 int rc; 2094 2095 tuner_dbg("%s:\n", __func__); 2096 2097 mutex_lock(&priv->lock); 2098 if (fe->ops.i2c_gate_ctrl) 2099 fe->ops.i2c_gate_ctrl(fe, 1); 2100 2101 rc = r820t_imr_callibrate(priv); 2102 if (rc < 0) 2103 goto err; 2104 2105 /* Initialize registers */ 2106 rc = r820t_write(priv, 0x05, 2107 r820t_init_array, sizeof(r820t_init_array)); 2108 2109err: 2110 if (fe->ops.i2c_gate_ctrl) 2111 fe->ops.i2c_gate_ctrl(fe, 0); 2112 mutex_unlock(&priv->lock); 2113 2114 if (rc < 0) 2115 tuner_dbg("%s: failed=%d\n", __func__, rc); 2116 return rc; 2117} 2118 2119static int r820t_sleep(struct dvb_frontend *fe) 2120{ 2121 struct r820t_priv *priv = fe->tuner_priv; 2122 int rc; 2123 2124 tuner_dbg("%s:\n", __func__); 2125 2126 mutex_lock(&priv->lock); 2127 if (fe->ops.i2c_gate_ctrl) 2128 fe->ops.i2c_gate_ctrl(fe, 1); 2129 2130 rc = r820t_standby(priv); 2131 2132 if (fe->ops.i2c_gate_ctrl) 2133 fe->ops.i2c_gate_ctrl(fe, 0); 2134 mutex_unlock(&priv->lock); 2135 2136 tuner_dbg("%s: failed=%d\n", __func__, rc); 2137 return rc; 2138} 2139 2140static int r820t_set_analog_freq(struct dvb_frontend *fe, 2141 struct analog_parameters *p) 2142{ 2143 struct r820t_priv *priv = fe->tuner_priv; 2144 unsigned bw; 2145 int rc; 2146 2147 tuner_dbg("%s called\n", __func__); 2148 2149 /* if std is not defined, choose one */ 2150 if (!p->std) 2151 p->std = V4L2_STD_MN; 2152 2153 if ((p->std == V4L2_STD_PAL_M) || (p->std == V4L2_STD_NTSC)) 2154 bw = 6; 2155 else 2156 bw = 8; 2157 2158 mutex_lock(&priv->lock); 2159 if (fe->ops.i2c_gate_ctrl) 2160 fe->ops.i2c_gate_ctrl(fe, 1); 2161 2162 rc = generic_set_freq(fe, 62500l * p->frequency, bw, 2163 V4L2_TUNER_ANALOG_TV, p->std, SYS_UNDEFINED); 2164 2165 if (fe->ops.i2c_gate_ctrl) 2166 fe->ops.i2c_gate_ctrl(fe, 0); 2167 mutex_unlock(&priv->lock); 2168 2169 return rc; 2170} 2171 2172static int r820t_set_params(struct dvb_frontend *fe) 2173{ 2174 struct r820t_priv *priv = fe->tuner_priv; 2175 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 2176 int rc; 2177 unsigned bw; 2178 2179 tuner_dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", 2180 __func__, c->delivery_system, c->frequency, c->bandwidth_hz); 2181 2182 mutex_lock(&priv->lock); 2183 if (fe->ops.i2c_gate_ctrl) 2184 fe->ops.i2c_gate_ctrl(fe, 1); 2185 2186 bw = (c->bandwidth_hz + 500000) / 1000000; 2187 if (!bw) 2188 bw = 8; 2189 2190 rc = generic_set_freq(fe, c->frequency, bw, 2191 V4L2_TUNER_DIGITAL_TV, 0, c->delivery_system); 2192 2193 if (fe->ops.i2c_gate_ctrl) 2194 fe->ops.i2c_gate_ctrl(fe, 0); 2195 mutex_unlock(&priv->lock); 2196 2197 if (rc) 2198 tuner_dbg("%s: failed=%d\n", __func__, rc); 2199 return rc; 2200} 2201 2202static int r820t_signal(struct dvb_frontend *fe, u16 *strength) 2203{ 2204 struct r820t_priv *priv = fe->tuner_priv; 2205 int rc = 0; 2206 2207 mutex_lock(&priv->lock); 2208 if (fe->ops.i2c_gate_ctrl) 2209 fe->ops.i2c_gate_ctrl(fe, 1); 2210 2211 if (priv->has_lock) { 2212 rc = r820t_read_gain(priv); 2213 if (rc < 0) 2214 goto err; 2215 2216 /* A higher gain at LNA means a lower signal strength */ 2217 *strength = (45 - rc) << 4 | 0xff; 2218 if (*strength == 0xff) 2219 *strength = 0; 2220 } else { 2221 *strength = 0; 2222 } 2223 2224err: 2225 if (fe->ops.i2c_gate_ctrl) 2226 fe->ops.i2c_gate_ctrl(fe, 0); 2227 mutex_unlock(&priv->lock); 2228 2229 tuner_dbg("%s: %s, gain=%d strength=%d\n", 2230 __func__, 2231 priv->has_lock ? "PLL locked" : "no signal", 2232 rc, *strength); 2233 2234 return 0; 2235} 2236 2237static int r820t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) 2238{ 2239 struct r820t_priv *priv = fe->tuner_priv; 2240 2241 tuner_dbg("%s:\n", __func__); 2242 2243 *frequency = priv->int_freq; 2244 2245 return 0; 2246} 2247 2248static int r820t_release(struct dvb_frontend *fe) 2249{ 2250 struct r820t_priv *priv = fe->tuner_priv; 2251 2252 tuner_dbg("%s:\n", __func__); 2253 2254 mutex_lock(&r820t_list_mutex); 2255 2256 if (priv) 2257 hybrid_tuner_release_state(priv); 2258 2259 mutex_unlock(&r820t_list_mutex); 2260 2261 fe->tuner_priv = NULL; 2262 2263 kfree(fe->tuner_priv); 2264 2265 return 0; 2266} 2267 2268static const struct dvb_tuner_ops r820t_tuner_ops = { 2269 .info = { 2270 .name = "Rafael Micro R820T", 2271 .frequency_min = 42000000, 2272 .frequency_max = 1002000000, 2273 }, 2274 .init = r820t_init, 2275 .release = r820t_release, 2276 .sleep = r820t_sleep, 2277 .set_params = r820t_set_params, 2278 .set_analog_params = r820t_set_analog_freq, 2279 .get_if_frequency = r820t_get_if_frequency, 2280 .get_rf_strength = r820t_signal, 2281}; 2282 2283struct dvb_frontend *r820t_attach(struct dvb_frontend *fe, 2284 struct i2c_adapter *i2c, 2285 const struct r820t_config *cfg) 2286{ 2287 struct r820t_priv *priv; 2288 int rc = -ENODEV; 2289 u8 data[5]; 2290 int instance; 2291 2292 mutex_lock(&r820t_list_mutex); 2293 2294 instance = hybrid_tuner_request_state(struct r820t_priv, priv, 2295 hybrid_tuner_instance_list, 2296 i2c, cfg->i2c_addr, 2297 "r820t"); 2298 switch (instance) { 2299 case 0: 2300 /* memory allocation failure */ 2301 goto err_no_gate; 2302 break; 2303 case 1: 2304 /* new tuner instance */ 2305 priv->cfg = cfg; 2306 2307 mutex_init(&priv->lock); 2308 2309 fe->tuner_priv = priv; 2310 break; 2311 case 2: 2312 /* existing tuner instance */ 2313 fe->tuner_priv = priv; 2314 break; 2315 } 2316 2317 memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, sizeof(r820t_tuner_ops)); 2318 2319 if (fe->ops.i2c_gate_ctrl) 2320 fe->ops.i2c_gate_ctrl(fe, 1); 2321 2322 /* check if the tuner is there */ 2323 rc = r820t_read(priv, 0x00, data, sizeof(data)); 2324 if (rc < 0) 2325 goto err; 2326 2327 rc = r820t_sleep(fe); 2328 if (rc < 0) 2329 goto err; 2330 2331 tuner_info("Rafael Micro r820t successfully identified\n"); 2332 2333 fe->tuner_priv = priv; 2334 memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, 2335 sizeof(struct dvb_tuner_ops)); 2336 2337 if (fe->ops.i2c_gate_ctrl) 2338 fe->ops.i2c_gate_ctrl(fe, 0); 2339 2340 mutex_unlock(&r820t_list_mutex); 2341 2342 return fe; 2343err: 2344 if (fe->ops.i2c_gate_ctrl) 2345 fe->ops.i2c_gate_ctrl(fe, 0); 2346 2347err_no_gate: 2348 mutex_unlock(&r820t_list_mutex); 2349 2350 tuner_info("%s: failed=%d\n", __func__, rc); 2351 r820t_release(fe); 2352 return NULL; 2353} 2354EXPORT_SYMBOL_GPL(r820t_attach); 2355 2356MODULE_DESCRIPTION("Rafael Micro r820t silicon tuner driver"); 2357MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); 2358MODULE_LICENSE("GPL"); 2359